| Rezimac® 62-6203 | Polynt Composites | Rezimac® 62-6203 is a chain-stopped silicone-modified alkyd resin for air-dry and bake coatings requiring high heat resistance, fast drying, crosslinkable, excellent weatherability. | |
| Rezimac® 62-6247 | Polynt Composites | Rezimac® 62-6247 is a silicone-modified epoxy ester resin for air-dry and bake coatings, good adhesion, chemical resistance and high heat resistance, wide variety of applications. | |
| Duramac® 52-5243 | Polynt Composites | Duramac® 52-5243 is a short oil alkyd resin for use with urea and melamine resins for bake coatings, can be used in conversion varnishes and energy saver formulas. | |
| Idroben 4705 | Benasedo | Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with ...view more Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with amino - resins. view less | |
| AROPLAZ® 5293-B-75 | Polynt Composites | AROPLAZ® 5293-B-75 is a water-dispersible polyester resin. This product offers good cure response with 20-30% amino crosslinkers, good flexibility and impact resistance, and good stain and chemical resistance. It can be used in conventional bake coatings ...view more AROPLAZ® 5293-B-75 is a water-dispersible polyester resin. This product offers good cure response with 20-30% amino crosslinkers, good flexibility and impact resistance, and good stain and chemical resistance. It can be used in conventional bake coatings for electrostatic spray applications and automotive coatings. view less | |
| Benasol T 35 | Benasedo | Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids leve...view more Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids level of 6-15, and an OH solids amount of 4.5-4.7%. view less | |
| SETALUX® 27-1501 | Allnex | SETALUX® 27-1501 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1501 exhibit excellent overall performance properties. Key properties include high soli...view more SETALUX® 27-1501 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1501 exhibit excellent overall performance properties. Key properties include high solids, low VOC formulation potential excellent exterior durability and good chemical resistance. view less | Request Sample |
| CRYLCOAT® 2451-6 | Allnex | CRYLCOAT® 2451-6 is a low viscosity carboxyl- functional polyester resin for use with TGIC in the production of low bake powder coatings as shown in cure curve for 93/7 ratio. Coatings based on CRYLCOAT® 2451-6 cured at 10 min x 150°C combine excellent fl...view more CRYLCOAT® 2451-6 is a low viscosity carboxyl- functional polyester resin for use with TGIC in the production of low bake powder coatings as shown in cure curve for 93/7 ratio. Coatings based on CRYLCOAT® 2451-6 cured at 10 min x 150°C combine excellent flexibility, adhesion, gloss and film hardness. view less | Request Sample |
| SETALUX® 27-1550 | Allnex | SETALUX® 27-1550 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1550 exhibit excellent overall performance properties. Key properties include high soli...view more SETALUX® 27-1550 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1550 exhibit excellent overall performance properties. Key properties include high solids, low VOC formulation potential, excellent flow and leveling, good flexibility and early water resistance. view less | Request Sample |
| SETALUX® 27-1551 | Allnex | SETALUX® 27-1551 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1551 exhibit excellent overall performance properties. Key properties include high soli...view more SETALUX® 27-1551 is a hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1551 exhibit excellent overall performance properties. Key properties include high solids, low VOC formulation potential, excellent flow and leveling, good flexibility and early water resistance. view less | Request Sample |
| SETALUX® 27-1590 | Allnex | SETALUX® 27-1590 is a fast curing hydroxyl-functional acrylic oligomer for 2K high solids air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1590 exhibit excellent overall performance properties. Key properties include fast cur...view more SETALUX® 27-1590 is a fast curing hydroxyl-functional acrylic oligomer for 2K high solids air dry, force dry and bake applications. Coatings formulated with SETALUX® 27-1590 exhibit excellent overall performance properties. Key properties include fast cure, good pot-life, high solids, and low VOC formulation potential. It also exhibits excellent flow and leveling, good flexibility and early water resistance. view less | Request Sample |
| CATHAYCOAT™ Black F9900M | Cathay Industries USA, Inc. | CATHAYCOAT™ Black F9900M is a high-quality, heat-stable black colored pigment suitable for a wide range of demanding applications. Typical applications include plastics, powder coatings, high-bake temperature industrial finishes, coil coatings, military c...view more CATHAYCOAT™ Black F9900M is a high-quality, heat-stable black colored pigment suitable for a wide range of demanding applications. Typical applications include plastics, powder coatings, high-bake temperature industrial finishes, coil coatings, military coatings, specialty coatings, ceramics, and roofing granules. Our micronized Heat Stable Black is to offer easy dispersion with high-speed impeller (Cowles type) milling equipment or single & twin screw extruders. view less | |
| CATHAYCOAT™ Yellow ZF15 | Cathay Industries USA, Inc. | CATHAYCOAT™ Yellow ZF15 is a high-quality, heat-stable yellow colored pigment suitable for a wide range of demanding applications. Typical applications include plastics, powder coatings, high-bake temperature industrial finishes, coil coatings, military c...view more CATHAYCOAT™ Yellow ZF15 is a high-quality, heat-stable yellow colored pigment suitable for a wide range of demanding applications. Typical applications include plastics, powder coatings, high-bake temperature industrial finishes, coil coatings, military coatings, specialty coatings, ceramics, and roofing granules. Our micronized Heat Stable Yellow is to offer easy dispersion with high-speed impeller (Cowles type) milling equipment or single & twin screw extruders. view less | |
| CATHAYCOAT™ Brown F8645-1 | Cathay Industries USA, Inc. | CATHAYCOAT™ Brown F8645-1 is a high-quality, heat-stable brown colored pigment suitable for a wide range of demanding applications. Typical applications include plastics, powder coatings, high-bake temperature industrial finishes, coil coatings, military ...view more CATHAYCOAT™ Brown F8645-1 is a high-quality, heat-stable brown colored pigment suitable for a wide range of demanding applications. Typical applications include plastics, powder coatings, high-bake temperature industrial finishes, coil coatings, military coatings, specialty coatings, ceramics, and roofing granules. Our micronized Heat Stable Brown is to offer easy dispersion with high-speed impeller (Cowles type) milling equipment or single & twin screw extruders. view less | |
| Sunsorb 99-2 | Yantai Suny Chem International Co., Ltd. | Sunsorb 99-2 is a UV Absorber that is recommended for coating such as trade sales paints, especially wood stains and clear varnishes, general industrial applications, high-bake industrial systems (e.g.coil coatings). | |
| SETAL® 11-1390 | Allnex | SETAL® 11-1390 is a chain-stopped tall oil alkyd resin for use in the manufacture of general industrial air dry or bake enamels and conversion coatings for wood furniture and bath or kitchen cabinets. Crosslinking SETAL® 11-1390 with aminoplast resins giv...view more SETAL® 11-1390 is a chain-stopped tall oil alkyd resin for use in the manufacture of general industrial air dry or bake enamels and conversion coatings for wood furniture and bath or kitchen cabinets. Crosslinking SETAL® 11-1390 with aminoplast resins gives good durability and resistance to solvents and moisture. view less | Request Sample |
| Chisorb® 5892 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 5892 is a blend of light stabilizers in liquid form, specially designed for coatings. Use of this product would enable the high cost-performance and industrial coating applications. The high thermal stability and persistence property makes it sui...view more Chisorb® 5892 is a blend of light stabilizers in liquid form, specially designed for coatings. Use of this product would enable the high cost-performance and industrial coating applications. The high thermal stability and persistence property makes it suitable for coatings exposed to high bake temperatures and to extreme environmental conditions. Its wide UV absorption permits efficient protection of light sensitive substrates such as wood and plastics. This product is a viscous amber liquid. view less | |
| TINUVIN® 400-DW (N) | BASF Dispersions & Resins | TINUVIN 400-DW (N) is an aqueous white to light beige liquid dispersion of a 2-hydroxy-phenyl-s-triazine (HPT) UV absorber (UVA). It is a versatile light stabilizer which can be used in a variety of waterborne coating systems. It has been designed to fulfill the high cost/performance and durability requirements of interior and exterior industrial, decorative and automotive coatings. The high thermal stability and photo-permanence makes it suitable for coatings exposed to high bake...view more TINUVIN 400-DW (N) is an aqueous white to light beige liquid dispersion of a 2-hydroxy-phenyl-s-triazine (HPT) UV absorber (UVA). It is a versatile light stabilizer which can be used in a variety of waterborne coating systems. It has been designed to fulfill the high cost/performance and durability requirements of interior and exterior industrial, decorative and automotive coatings. The high thermal stability and photo-permanence makes it suitable for coatings exposed to high bake temperatures and/or to extreme environmental conditions. view less | |
| Chroma-chem® 895-0005 | Chromaflo Technologies | Chroma-chem® 895-0005 is a Titanium White industrial pigment with the CI Name PW 6. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC ...view more Chroma-chem® 895-0005 is a Titanium White industrial pigment with the CI Name PW 6. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0405 | Chromaflo Technologies | Chroma-chem® 895-0405 is a Quinacridone Red industrial pigment with the CI Name PW 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low V...view more Chroma-chem® 895-0405 is a Quinacridone Red industrial pigment with the CI Name PW 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0724 | Chromaflo Technologies | Chroma-chem® 895-0724 is a Organic Red industrial pigment with the CI Name PR 254. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC a...view more Chroma-chem® 895-0724 is a Organic Red industrial pigment with the CI Name PR 254. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0975 | Chromaflo Technologies | Chroma-chem® 895-0975 is a Medium Orange industrial pigment with the CI Name PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC ...view more Chroma-chem® 895-0975 is a Medium Orange industrial pigment with the CI Name PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-1006 | Chromaflo Technologies | Chroma-chem® 895-1006 is a Red Oxide industrial pigment with the CI Name PR 101. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and...view more Chroma-chem® 895-1006 is a Red Oxide industrial pigment with the CI Name PR 101. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-1305 | Chromaflo Technologies | Chroma-chem® 895-1305 is a Burnt Umber industrial pigment with the CI Name PBR 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC an...view more Chroma-chem® 895-1305 is a Burnt Umber industrial pigment with the CI Name PBR 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-1806 | Chromaflo Technologies | Chroma-chem® 895-1806 is a Yellow Oxide industrial pigment with the CI Name PY 42. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC a...view more Chroma-chem® 895-1806 is a Yellow Oxide industrial pigment with the CI Name PY 42. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-2605 | Chromaflo Technologies | Chroma-chem® 895-2605 is an Organic Yellow industrial pigment with the CI Name PY 175. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low V...view more Chroma-chem® 895-2605 is an Organic Yellow industrial pigment with the CI Name PY 175. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-5505 | Chromaflo Technologies | Chroma-chem® 895-5505 is a Phthalo Green industrial pigment with the CI Name PG 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC a...view more Chroma-chem® 895-5505 is a Phthalo Green industrial pigment with the CI Name PG 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-9406 | Chromaflo Technologies | Chroma-chem® 895-9406 is a Quinacridone Violet industrial pigment with the CI Name PV 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are lo...view more Chroma-chem® 895-9406 is a Quinacridone Violet industrial pigment with the CI Name PV 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-9905 | Chromaflo Technologies | Chroma-chem® 895-9905 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and...view more Chroma-chem® 895-9905 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-9906 | Chromaflo Technologies | Chroma-chem® 895-9906 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and...view more Chroma-chem® 895-9906 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0905 | Chromaflo Technologies | Chroma-chem® 895-0905 is a Lead-Free Orange industrial pigment with the CI Name PO 34/PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are...view more Chroma-chem® 895-0905 is a Lead-Free Orange industrial pigment with the CI Name PO 34/PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-7205 | Chromaflo Technologies | Chroma-chem® 895-7205 is a Phthalo Blue industrial pigment with the CI Name PB 15:2. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC...view more Chroma-chem® 895-7205 is a Phthalo Blue industrial pigment with the CI Name PB 15:2. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-2505 | Chromaflo Technologies | Chroma-chem® 895-2505 is a L/F Medium Yellow industrial pigment with the CI Name PY 83/PY 15. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They ar...view more Chroma-chem® 895-2505 is a L/F Medium Yellow industrial pigment with the CI Name PY 83/PY 15. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| TINUVIN® 384-2 | BASF Dispersions & Resins | TINUVIN 384-2 is a liquid UV absorber of the hydroxyphenylbenzotriazole class developed for coatings. Its very high thermal stability and environmental permanence makes it suitable for coatings exposed to high bake cycles and/or extreme environmental cond...view more TINUVIN 384-2 is a liquid UV absorber of the hydroxyphenylbenzotriazole class developed for coatings. Its very high thermal stability and environmental permanence makes it suitable for coatings exposed to high bake cycles and/or extreme environmental conditions. It has been designed to fulfill the high performance and durability requirements of automotive and industrial high quality finishes. Its broad UV absorption allows efficient protection of light sensitive base coats or substrates such as wood and plastics. Since its absorption spectrum does not tail significantly into the visible region, it is an ideal UV absorber for those systems where initial yellowing must be kept to a minimum. view less | |
| K-KAT® XK-640 | King Industries, Inc. | K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the env...view more K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the environmental drawbacks. K-KAT® XK-640 is a designed to provide improved hydrolytic stability compared to other bismuth carboxylate catalysts. This product is soluble in glycol ethers, aliphatics, and aromatics, has partial solubility in alcohols and esters, and is insoluble in water. It appears as a clear, amber liquid, is 18% metal, and can be applied in ambient, force dry and bake systems, 2K and blocked isocyanate coatings, and in the production of urethane coatings. view less | |
| Duramac® 51-5186 | Polynt Composites | Duramac® 51-5186 is a medium oil alkyd resin that can be formulated into high drink, lower solids coatings, can be used in air-dry or bake systems. | |
| CRYLCOAT® 4442-2 | Allnex | CRYLCOAT® 4442-2 is a superdurable, low bake carboxyl functional polyester resin for use with 7% TGIC in outdoor powder coatings with full cure at 10 min x 160°C (object temperature). Coatings based on CRYLCOAT® 4442-2 provide high gloss, flow out, DOI an...view more CRYLCOAT® 4442-2 is a superdurable, low bake carboxyl functional polyester resin for use with 7% TGIC in outdoor powder coatings with full cure at 10 min x 160°C (object temperature). Coatings based on CRYLCOAT® 4442-2 provide high gloss, flow out, DOI and smoothness. view less | Request Sample |
| CRYLCOAT® 2499-6 | Allnex | CRYLCOAT® 2499-6 is a carboxyl functional polyester resin for use in low bake (10 min x 160°C) TGIC powder coatings. Coatings based on this product exhibit good flow, excellent gloss, mechanical properties with improved storage stability and blooming resi...view more CRYLCOAT® 2499-6 is a carboxyl functional polyester resin for use in low bake (10 min x 160°C) TGIC powder coatings. Coatings based on this product exhibit good flow, excellent gloss, mechanical properties with improved storage stability and blooming resistance. view less | Request Sample |
| Crestakyd® 20-5024 | Scott Bader | Crestakyd® 20-5024 is used for air drying and low bake industrial finishes. | |
| SETAQUA® 47-1257 | Allnex | SETAQUA® 47-1257 is water reducible acrylic polyol designed for use in high gloss, industrial bake enamel systems. When used in conjunction with melamine crosslinking resins such as Cymel® 303, it produces hard, high gloss coatings with excellent flexibil...view more SETAQUA® 47-1257 is water reducible acrylic polyol designed for use in high gloss, industrial bake enamel systems. When used in conjunction with melamine crosslinking resins such as Cymel® 303, it produces hard, high gloss coatings with excellent flexibility and chemical resistance. view less | Request Sample |
| EPOTUF® 38-690 | Polynt Composites | EPOTUF® 38-690 is an epoxy ester resin solution that can be formulated into VOC-compliant water-based primers and enamels for air-dry and bake applications, after it has been neutralized with an organic amine. This product can be used in maintenance coati...view more EPOTUF® 38-690 is an epoxy ester resin solution that can be formulated into VOC-compliant water-based primers and enamels for air-dry and bake applications, after it has been neutralized with an organic amine. This product can be used in maintenance coatings, dip coatings, topcoats for metal consumer goods, and MIL-P-53032 primers. It dries quickly and produces a tough, flexible film. view less | |
| BECKOPOX™ EH 694 | Allnex | BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit c...view more BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance. view less | Request Sample |
| CRYLCOAT® 2679-6 | Allnex | CRYLCOAT® 2679-6 is a high reactive carboxyl functional polyester resin for use with 5% HAA hardener in low bake (10 min x 160°C) formulations for architectural applications. Coatings based on CRYLCOAT® 2679-6 exhibit good outdoor durability and improved ...view more CRYLCOAT® 2679-6 is a high reactive carboxyl functional polyester resin for use with 5% HAA hardener in low bake (10 min x 160°C) formulations for architectural applications. Coatings based on CRYLCOAT® 2679-6 exhibit good outdoor durability and improved water-spot resistance. view less | Request Sample |
| CRYLCOAT® 2693-6 | Allnex | CRYLCOAT® 2693-6 is a low bake tribo active Primid® polyester resin for matte dry blend systems in a ratio of 93/7. In combination with CRYLCOAT® 2668-6 powder coatings with 60° gloss between 25 and 30 gloss units can be formulated. Full cure can be achie...view more CRYLCOAT® 2693-6 is a low bake tribo active Primid® polyester resin for matte dry blend systems in a ratio of 93/7. In combination with CRYLCOAT® 2668-6 powder coatings with 60° gloss between 25 and 30 gloss units can be formulated. Full cure can be achieved at 12 min x 160°C schedule. view less | Request Sample |
| CRYLCOAT® 2609-6 | Allnex | CRYLCOAT® 2609-6 is a high reactive, tribo active carboxyl functional polyester resin for use with 5% HAA hardener in low bake (12 min x 160°C object temperature) formulations for architectural applications. Coatings based on CRYLCOAT® 2609-6 are blooming...view more CRYLCOAT® 2609-6 is a high reactive, tribo active carboxyl functional polyester resin for use with 5% HAA hardener in low bake (12 min x 160°C object temperature) formulations for architectural applications. Coatings based on CRYLCOAT® 2609-6 are blooming resistant and exhibit improved outdoor durability and water-spot resistance. view less | Request Sample |
| UROTUF® L53-MPW-30 | Polynt Composites | UROTUF® L53-MPW-30 is an anionic dispersion of an aliphatic urethane polymer supplied in a blend of N-methylpyrrolidone and water that can be used in clear and pigmented coatings for flexible and semi-rigid plastics, base resins for printing inks, coating...view more UROTUF® L53-MPW-30 is an anionic dispersion of an aliphatic urethane polymer supplied in a blend of N-methylpyrrolidone and water that can be used in clear and pigmented coatings for flexible and semi-rigid plastics, base resins for printing inks, coatings for rubber and leather, and clear or pigmented bake finishes on steel or aluminum. This product has high impact abrasion, stain and chemical resistance. It reduces with water and is compatible with anionic pigments and dispersing agents. view less | |
| BENASOL R 40 D | Benasedo | BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to...view more BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to formulate clear and pigmented acid- curing coatings and nitrocellulose lacquers. view less | |
| CRYLCOAT® 2696-6 | Allnex | CRYLCOAT® 2696-6 is a high reactive, tribo enhanced carboxyl functional polyester resin for use with 5% Primid® XL 552 in low bake (10 min x 160°C) or fast cure (2 min x 180°C) formulations for the industrial coatings seg-ment. Coatings based on CRYLCOAT®...view more CRYLCOAT® 2696-6 is a high reactive, tribo enhanced carboxyl functional polyester resin for use with 5% Primid® XL 552 in low bake (10 min x 160°C) or fast cure (2 min x 180°C) formulations for the industrial coatings seg-ment. Coatings based on CRYLCOAT® 2696-6 exhibit excellent blooming-resistance at low temperatures and good overall properties. CRYLCOAT® 2696-6 belongs to the ECOWISE™ CHOICE product range for selected applications. (Contact your allnex representative for more information). view less | Request Sample |
| 4947-SP-75 Water Reducible Alkyd | Gabriel Performance Products | 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated. | |
| CRYLCOAT® 2668-6 | Allnex | CRYLCOAT® 2668-6 is a low bake tribo active carboxyl functional Primid® polyester resin in ratio of 97/3 for matte dry- blend systems. In combination with CRYLCOAT® 2693-6, powder coatings with 60° gloss between 25 and 30 gloss units can be formulated; fu...view more CRYLCOAT® 2668-6 is a low bake tribo active carboxyl functional Primid® polyester resin in ratio of 97/3 for matte dry- blend systems. In combination with CRYLCOAT® 2693-6, powder coatings with 60° gloss between 25 and 30 gloss units can be formulated; full cure can be achieved at 12 min x 160°C schedule. view less | Request Sample |
| CYMEL® XW 3106 | Allnex | CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate hi...view more CYMEL® XW 3106 resin is a specially alkylated, high solids melamine crosslinking agent designed for solvent-borne, two-pack ambient and low bake formulations. The low temperature cure potential for this crosslinker provides the opportunity to formulate high performance coatings for heat sensitive substrates. These systems have excellent early hardness, resistance properties, appearance and hot/cold cycle flexibility. view less | Request Sample |
| BECKOSOL® 12-035 | Polynt Composites | BECKOSOL® 12-035 is a short-oil, non-drying, coconut oil alkyd resin. This product offers high gloss retention and good durability. It can be used in high-bake white enamels and clear or light-colored furniture lacquers. | |
| SETAL® 11-2407 | Allnex | SETAL® 11-2407 is a medium soybean oil alkyd designed for use in a wide variety of high quality air dry, force dry (160-180°F surface temperature) or bake finishes. This alkyd is an excellent choice for formulating fast setting traffic paints. SETAL® 11-2...view more SETAL® 11-2407 is a medium soybean oil alkyd designed for use in a wide variety of high quality air dry, force dry (160-180°F surface temperature) or bake finishes. This alkyd is an excellent choice for formulating fast setting traffic paints. SETAL® 11-2407 is also an excellent choice for coatings on farm machinery, industrial implements and structural steel. view less | Request Sample |
| K-KAT® 348 | King Industries, Inc. | K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...view more K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. view less | |
| BECKOSOL® 11-081 | Polynt Composites | BECKOSOL® 11-081 is a medium-oil soy alkyd for air-dry and bake systems that can be used in traffic paints, structural steel paints, and baking primers. It can also be used as a grinding vehicle. This product features exterior durability, initial gloss, a...view more BECKOSOL® 11-081 is a medium-oil soy alkyd for air-dry and bake systems that can be used in traffic paints, structural steel paints, and baking primers. It can also be used as a grinding vehicle. This product features exterior durability, initial gloss, and good gloss retention. view less | |
| BECKOSOL® 12107-X-60 | Polynt Composites | BECKOSOL® 12107-X-60 is a chain-stopped alkyd that can be used in air-dry or low-bake industrial enamels. This product features good color and color retention, with good chemical resistance. It has a fast dry or conversion rate. | |
| UROTUF® L51 | Polynt Composites | UROTUF® L51 is a fully reacted, aliphatic thermoplastic urethane dispersed in a blend of water, amines, and N-methylpyrrolidone. This product can be used in clear or pigmented coatings for plastics, clear or pigmented bake finishes for aluminum or steel, ...view more UROTUF® L51 is a fully reacted, aliphatic thermoplastic urethane dispersed in a blend of water, amines, and N-methylpyrrolidone. This product can be used in clear or pigmented coatings for plastics, clear or pigmented bake finishes for aluminum or steel, and slip finishes on flexible films and leather. This product reduces in water, and is compatible with anionic pigments and dispersing agents. It can be cross-linked with melamine, polyaziridine, and carbodiimide resins. view less | |
| K-KAT® XC-B221 | King Industries, Inc. | K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawb...view more K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawbacks. This product offers good glass retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. K-KAT® XC-B221 is soluble in butanol, ethanol, methanol, isopropanol, glycol ethers, glycol ether acetates, aliphatic and aromatic hydrocarbons, and is insoluble in water. This product appears as a clear, straw liquid and can be applied in 2K, blocked isocyanate coatings, urethane elastomers, foams, coatings, and cationic electro-coatings. view less | |
| UROTUF® L522-MPW-40 | Polynt Composites | UROTUF® L522-MPW-40 is an anionic dispersion of an aliphatic urethane polymer in N-methylpyrrolidone and water that can be used in clear or pigmented coatings for flexible and semi-rigid plastics, higher abrasion-resistant slip finishes on flexible films ...view more UROTUF® L522-MPW-40 is an anionic dispersion of an aliphatic urethane polymer in N-methylpyrrolidone and water that can be used in clear or pigmented coatings for flexible and semi-rigid plastics, higher abrasion-resistant slip finishes on flexible films and leather, and clear or pigmented bake finishes on steel and aluminum. This product dries quickly, and can be cross-linked with polyaziridine or carbodiimide. It is compatible with anionic pigments and dispersants. view less | |
| Benester 602 | Benasedo | Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an ...view more Benester 602 is used in low-cost bake sealers and topcoats that are specially designed for coil-coatings with higher solid contents. It is linear, an H.B. Naphta/M.P.A. solvent, and has a 65% solids content. This product has a viscosity [G.H.] of U-V, an A.V. solids amount of 5-10, an OH solids amount of 1.3-1.5, and a color [G.H.] maximum of 3. view less | |
| UROTUF® L-512 | Polynt Composites | UROTUF® L-512 is a fully-reacted, aliphatic and thermoplastic urethane resin that has been dispersed in a blend of water, n-methylpyrrolidone and amines. This product offers abrasion resistance, chemical resistance and stain resistance and is compatible with anionic pigments and dispersants. It can be used in clear wood floor finishes, clear and pigmented coatings for plastics, clear and pigmented bake...view more UROTUF® L-512 is a fully-reacted, aliphatic and thermoplastic urethane resin that has been dispersed in a blend of water, n-methylpyrrolidone and amines. This product offers abrasion resistance, chemical resistance and stain resistance and is compatible with anionic pigments and dispersants. It can be used in clear wood floor finishes, clear and pigmented coatings for plastics, clear and pigmented bake finishes for aluminum and steel, and slip finishes on flexible films and leather. view less | |
| BECKOSOL® 90-185 | Polynt Composites | BECKOSOL® 90-185 is a high-solids, short-oil, non-drying coconut oil alkyd resin. This product offers good color and color retention, high gloss, and good durability. It can be used in high-bake white enamels and clear or light-colored furniture lacquers. | |
| NACURE® 3525 | King Industries, Inc. | NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, esp...view more NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, especially in high solids polyester and alkyd formulations. It offers good ahesion, salt spray and water resistance, and no wrinkling. It is soluble in water, alcohol, glycol ethers, ketones, and glycols. It is usually applied in metal decorating, automotive topcoats, coil coatings, can coatings, appliance finishes, general industrials, and electrostatic spray. view less | |
| UROTUF® L51-35 | Polynt Composites | UROTUF® L51-35 is a fully reacted, color-retentive, thermoplastic urethane dispersed in a blend of N-methylpyrrolidone and water, which can be used in clear and pigmented coatings for plastics, wood, and concrete, slip finishes on flexible films and leath...view more UROTUF® L51-35 is a fully reacted, color-retentive, thermoplastic urethane dispersed in a blend of N-methylpyrrolidone and water, which can be used in clear and pigmented coatings for plastics, wood, and concrete, slip finishes on flexible films and leather, and clear or pigmented bake finishes for aluminum and steel. This product provides good flexibility and adheres well to a variety of flexible or semi-rigid plastics. It can be cross-linked with polyaziridine, carbodiimide, or melamine resins. view less | |
| NACURE® 1557 | King Industries, Inc. | NACURE® 1557 appears as a clear and dark liquid. It is an amine blocked Dinonylnaphthalenesulfonic acid (DNNSA) stimulant uniquely made for decreased blistering in thicker films that are cured at higher temperatures. This product erases solvent popping in high bake thick films and offers low conductivity, excellent humidity, and detergent resistance. It is soluble in alcohol, glycols, esters, glycol ethers, ketones, aromatic and aliphatic hydrocarbons. It is not soluble in water. It can be applied to things such as electrostatic spray, general industrials, can coatings, coil coatings...view more NACURE® 1557 appears as a clear and dark liquid. It is an amine blocked Dinonylnaphthalenesulfonic acid (DNNSA) stimulant uniquely made for decreased blistering in thicker films that are cured at higher temperatures. This product erases solvent popping in high bake thick films and offers low conductivity, excellent humidity, and detergent resistance. It is soluble in alcohol, glycols, esters, glycol ethers, ketones, aromatic and aliphatic hydrocarbons. It is not soluble in water. It can be applied to things such as electrostatic spray, general industrials, can coatings, coil coatings, and appliance finishes. view less | |
| K-KAT® XK-628 | King Industries, Inc. | K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appear...view more K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appears as a clear, amber liquid and is a made to give enhanced hydrolytic stability. This product offers good exterior ability, gloss retention, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is partially soluble in alcohols, esters, and is insoluble in water. This product can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams, and coatings. view less | |
| SETAL® 41-1459 | Allnex | SETAL® 41-1459 is a resin is recommended for industrial finishes cured by bake, air-dry or force-dry. SETAL® 41-1459 exhibits the desirable properties of very fast dry, good corrosion resistance and low application viscosity. SETAL® 41-1459 has better sta...view more SETAL® 41-1459 is a resin is recommended for industrial finishes cured by bake, air-dry or force-dry. SETAL® 41-1459 exhibits the desirable properties of very fast dry, good corrosion resistance and low application viscosity. SETAL® 41-1459 has better stability and maintains drying characteristics on aging than SETAL® 41-1390. view less | Request Sample |
| HPP-E-9891-21-65 | US Polymers - Accurez LLC | HPP-E-9891-21-65 is a medium soya oil chain stopped alkyd designed for use in a variety of industrial finishes. 9891 can be used in clear or pigmented applications. It is designed to give fast air dry or to be used in low bake industrial finishes. | Request Sample |
| HPP-E-9919-21-50 | US Polymers - Accurez LLC | HPP-E-9919-21-50 is a short oil, rosin phenolic modified alkyd designed for non-lifting primers and fast drying industrial enamels (air-dry or bake) supplied at 50% in a combination of xylene and VM&P. The resin was designed to meet TTP-664 federal specif...view more HPP-E-9919-21-50 is a short oil, rosin phenolic modified alkyd designed for non-lifting primers and fast drying industrial enamels (air-dry or bake) supplied at 50% in a combination of xylene and VM&P. The resin was designed to meet TTP-664 federal specifications. view less | Request Sample |
| Resinate® C2901-04 (PMA80) | Resinate Materials Group, Inc. | Resinate® C2901-04 (PMA80) is a branched, high-performance polyester polyol for 2K urethane or 1K bake enamel protection. It is supplied at 80% solids in Propylene glycol monomethyl ether acetate. This product is designed for demanding direct to metal app...view more Resinate® C2901-04 (PMA80) is a branched, high-performance polyester polyol for 2K urethane or 1K bake enamel protection. It is supplied at 80% solids in Propylene glycol monomethyl ether acetate. This product is designed for demanding direct to metal applications where weather stability and versatile performance systems are required. view less | |
| BECKOSOL® 6422-K3-75 | Polynt Composites | BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construct...view more BECKOSOL® 6422-K3-75 is a short oil, high solids, chain-stopped alkyd in methylpropyl ketone that can be used in aerosol paints, direct to metal (DTM) coatings, air-dry or low-bake primers and shopcoats, in lacquer modifiers, and farm, road, and construction equipment finishes, among other uses. This product dries tack-free in two hours and provides good color and color retention. It has strong water-spot, humidity, and salt spray resistance and will retain gloss in exterior exposures. view less | |
| BECKOSOL® 12-102 | Polynt Composites | BECKOSOL® 12-102 is a chain-stopped alkyd that can be used as a single resin or in combination with other resins in automotive refinishing enamels, low bake enamels, implement finishes, and general-purpose air-dry coatings. This product dries quickly with...view more BECKOSOL® 12-102 is a chain-stopped alkyd that can be used as a single resin or in combination with other resins in automotive refinishing enamels, low bake enamels, implement finishes, and general-purpose air-dry coatings. This product dries quickly with minimal after-tack, and provides good hardness, color, and color retention. It has a rapid response with UF and MF resins, medium and short oil alkyds, nitrocellulose, and VAGH vinyl resins. view less | |
| Isocryl® EP-555 | Estron Chemical, Inc. | Isocryl® EP-555 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® EP-555, with a Tg of 53°C, has the smoothest appearance of comparable resins, notably at low bake...view more Isocryl® EP-555 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® EP-555, with a Tg of 53°C, has the smoothest appearance of comparable resins, notably at low bake temperatures. It is recommended where distinctness of image is the critical aesthetic criterion. view less | |
| Escat™ 110 | Estron Chemical, Inc. | Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy,...view more Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, and polyesters cured by GMA functional acrylics. Escat™ 110's benefits include that it is to reduce the cure temperature of a particular system, or shorten the required bake time at a given cure temperature. view less | |
| NACURE® 1953 | King Industries, Inc. | NACURE® 1953 is an amine blocked DNNSA stimulant and appears as a clear amber liquid. This is a product that is made to be applied in higher bake amino crosslinked systems like metal decorating, coil coatings and can also be applied in things such as elec...view more NACURE® 1953 is an amine blocked DNNSA stimulant and appears as a clear amber liquid. This is a product that is made to be applied in higher bake amino crosslinked systems like metal decorating, coil coatings and can also be applied in things such as electrocoating and appliance finishes. This product is resistant to detergent, overbake, humidity, and offers great flow and leveling, along with good solubility in organic solvents. NACURE® 1953 is soluble in aliphatic and aromatic hydrocarbons, alcohol, ketones, esters, glycol ethers and is insoluble in water. view less | |
| SETAL® 11-2412 | Allnex | SETAL 11-2412 is a medium soybean oil alkyd designed for use in a wide variety of high-quality air dry, force dry (160-180°F surface temperature) or bake finishes. This alkyd is an excellent choice for formulating fast setting traffic paints. SETAL 11-24...view more SETAL 11-2412 is a medium soybean oil alkyd designed for use in a wide variety of high-quality air dry, force dry (160-180°F surface temperature) or bake finishes. This alkyd is an excellent choice for formulating fast setting traffic paints. SETAL 11-2412 is also an excellent choice for coatings on farm machinery, industrial implements and structural steel. Additional chemical resistance and enhanced performance may be obtained by crosslinking with melamine resin (e.g., Allnex Cymel® 303). view less | Request Sample |
| CYCAT® 296-9 | Allnex | CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake...view more CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked. view less | Request Sample |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| BECKOSOL® 12035-E2 | Polynt Composites | BECKOSOL® 12035-E2 is a short-oil coconut alkyd resin that has been supplied in tertiary butyl acetate and aromatic 100 solvent. This product has a low initial color and will generate color-stable films. It can be used in conversion varnishes with good cure speed and pot life, in low-HAP bake...view more BECKOSOL® 12035-E2 is a short-oil coconut alkyd resin that has been supplied in tertiary butyl acetate and aromatic 100 solvent. This product has a low initial color and will generate color-stable films. It can be used in conversion varnishes with good cure speed and pot life, in low-HAP bake finishes with good color stability, and as a plasticizer for light-colored nitrocellulose lacquers. view less | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...view more 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. view less | |
| NACURE® XC-181 | King Industries, Inc. | NACURE® XC-181 is a latent stimulant based on an alkylaromatic sulfonic acid and appears as a clear, dark liquid. It is made for use in higher bake amino crosslinked structures such as metal decorating and coil coatings, and is also applied in automotive ...view more NACURE® XC-181 is a latent stimulant based on an alkylaromatic sulfonic acid and appears as a clear, dark liquid. It is made for use in higher bake amino crosslinked structures such as metal decorating and coil coatings, and is also applied in automotive topcoats and appliance finishes. It offers overbake resistance, “solvent pop” resistance, solubility in non-polar solvents and it is amine free. This product is soluble in aliphatic and aromatic hydrocarbons, alcohols, esters, ketones and glycol ethers. it is insoluble in water and glycols. view less | |
| Escat™ 60 | Estron Chemical, Inc. | Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 6...view more Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 60 include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, polyesters cured by GMA-functional acrylics, polyester-TGIC and polyester-PT-910. Escat™ 60 reduces the cure temperature of a particular system and shortens the required bake time at a given cure temperature when compared to non-catalyzed systems. view less | |
| Benester 27 | Benasedo | Benester 27 is a sligty branched hydroxylated polyester resin. It is recommended for baking systems, crosslinked with amino resins and/or blocked aliphatic polyisocyanates, and particularly indicated for back coatings enamels in coil coating applications. | |
| Escat™ 50 | Estron Chemical, Inc. | Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction...view more Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems as well. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy and polyesters cured by GMA-functional acrylics. Polyester-TGIC and polyester-PT-910 reactions can also be accelerated. Escat™ 50 can reduce the cure temperature of a particular system or shorten the required bake time at a given cure temperature without sacrificing DOI or flow and leveling properties. view less | |
| JONCRYL® 848 | BASF Dispersions & Resins | JONCRYL 848 is a high acid functional acrylic resin designed specifically as a gloss control additive for acrylic epoxy hybrids or for use as a stand alone resin. Typical recommended use levels are 3 – 9 parts per hundred resin as a modifier. Over this range, a wide variety of glosses can be achieved without detracting from the excellent properties associated with acrylic hybrids. Using JONCRYL 848 in combination with JONCRYL 819 or JONCRYL 820, economical low gloss acrylic hybrid formulations can be made which are often much more cost effective than either polyester epoxies. An added benefit of using JONCRYL 848 is that it provides excellent color and gloss stability over a wide range of bake...view more JONCRYL 848 is a high acid functional acrylic resin designed specifically as a gloss control additive for acrylic epoxy hybrids or for use as a stand alone resin. Typical recommended use levels are 3 – 9 parts per hundred resin as a modifier. Over this range, a wide variety of glosses can be achieved without detracting from the excellent properties associated with acrylic hybrids. Using JONCRYL 848 in combination with JONCRYL 819 or JONCRYL 820, economical low gloss acrylic hybrid formulations can be made which are often much more cost effective than either polyester epoxies. An added benefit of using JONCRYL 848 is that it provides excellent color and gloss stability over a wide range of bake temperatures, a negative feature of many other common powder de-glossing agents. view less | |
| Gradient-Oven | BYK-Gardner USA | The Gradient-Oven is a test apparatus for evaluating the baking and drying behavior of liquid coatings, powder coatings, resins, and plastics. A production baking process can be simulated by programming heat-up speed, baking temperature and time. This ins...view more The Gradient-Oven is a test apparatus for evaluating the baking and drying behavior of liquid coatings, powder coatings, resins, and plastics. A production baking process can be simulated by programming heat-up speed, baking temperature and time. This instrument saves time and energy, generates various curing temperatures on one panel, and simulates the temperature profile of a production oven in the laboratory. view less |  |
| SILRES® HK 46 | Wacker Chemical Corporation | SILRES® HK 46 is a methyl group containing silicone resin solution in xylene/n-butanol 4:1. It's typically used in heat resistant coatings and combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up t...view more SILRES® HK 46 is a methyl group containing silicone resin solution in xylene/n-butanol 4:1. It's typically used in heat resistant coatings and combines outstanding heat resistance and weatherability. With proper coating formulation, thermal stability up to 600°C (1100°F) can be achieved in combination with suitable temperature stable pigments and fillers. It can be applied in baking molds, baking tray coatings, coatings, heat-resistant coatings and metal coatings. view less | Request Sample |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| HEUCOPHOS® ZPA In Baking Enamel (Formulation #SIX 2311/1/3) | Heubach Ltd | HEUCOPHOS® ZPA In Baking Enamel (Formulation #SIX 2311/1/3) is a formulation for a water based baking enamel in combination with Bayer formulation No. SIX 2311/1/3. | |
| Urea Formaldehyde Resin 5265 | Jiangsu Sanmu Group Corporation | Urea Formaldehyde Resin 5265 is an urea resin used in primer coil coatings and amino baking paints. | |
| KA-7602 | Keeneyes International Co., Ltd. | KA-7602 is a matting powder for amine baking coatings, PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| Urea Formaldehyde Resin 578-1 | Jiangsu Sanmu Group Corporation | Urea Formaldehyde Resin 578-1 is an urea resin used in primer coil coatings and amino baking paints. | |
| PLASTOPAL® EBS 400 I | BASF Dispersions & Resins | PLASTOPAL EBS 400 I is a urea-formaldehyde resin solution for baking finishes, acid-cured finishes and nitrocellulose lacquers. It is used in baking and acid-curable finishes. It can also be used to formulate nitrocellulose coatings where it suppresses ye...view more PLASTOPAL EBS 400 I is a urea-formaldehyde resin solution for baking finishes, acid-cured finishes and nitrocellulose lacquers. It is used in baking and acid-curable finishes. It can also be used to formulate nitrocellulose coatings where it suppresses yellowing and imparts gloss. This product is recommended for applications such as industrial baking enamels, nitrocellulose lacquers, and conversion varnishes. view less | |
| Desmodur® BL 3475 BA/SN | Covestro | Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings...view more Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings, especially for cans and tubes. The product can also be used as an additive to improve the reactivity, flexibility and adhesion of conventional baking systems. view less | |
| Epokukdo YD-017H | Kukdo Chemical Co., Ltd. | Epokukdo YD-017H is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to...view more Epokukdo YD-017H is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD -017H are process equipment coating enamels, collapsible tube coatings, can coating, PCM, metal furniture finishes, and wire enamels. view less | |
| Epokukdo YD-017 | Kukdo Chemical Co., Ltd. | Epokukdo YD-017 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to...view more Epokukdo YD-017 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance, one-package baking finishes. Coatings based on the resin produce films with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Typical uses for YD-017 are process equipment coating enamels, collapsible tube coatings, can coating, metal furniture finishes, and wire enamels. view less | |
| KA-7101 | Keeneyes International Co., Ltd. | KA-7101is a matting powder mainly used for amine baking coating, PU and PE coating. It offers high matting efficiency, good transparency, and easy dispersibility. This product has no adverse effect on coating films. | |
| Coronate® 2507 | Tosoh Corporation | Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less | |
| Coronate® 2513 | Tosoh Corporation | Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less | |
| Solvent Yellow 146 | Hangzhou Epsilon Chemical Co., Ltd. | Solvent Yellow 146 is used in wood stains, wood coatings, printing inks, aluminum foil coloring, hot stamping foil coloring, paints, coatings, leather finishes, baking finishes, stationery ink and plastic coatings. |
