| CV-1142 | NuSil Silicone Technology 1 | CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive d...view more CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. Furthermore, it is also best used for applications requiring extremely low temperatures. view less | |
| Datacolor 500™ | Datacolor | Economical spectrophotometer with embedded processor and data storage, offering increased efficiency and measurement confidence, best-in-class precision and accuracy, while assuring fleet compatibility. |  |
| CN6512 | Sartomer Americas | CN6512 is an acrylate oligomer developed for 100% solids UV soft feel applications. Use CN6512 for a silky feel with the best stain and solvent resistance. | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...view more CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). view less | |
| LLR-80 Polyketone Resin | Yueyang Dongrun Chemical Co., Ltd. | LLR-80 Polyketone Resin is a condensation product from cyclohexanone which is bright and resistant to hydrolysis. Polyketone resins are best suited for ink, coatings, and pigment pastes. | |
| R-110 Polyketone Resin | Yueyang Dongrun Chemical Co., Ltd. | R-110 Polyketone Resin is a condensation product from cyclohexanone which is bright and resistant to hydrolysis. Polyketone resins are best suited for ink, coatings, and pigment pastes. | |
| Datacolor 850™ | Datacolor | The Benchmark Transmission and Reflectance Instrument, with embedded processor and data storage, offering increased measurement efficiency and confidence, best-in-class precision and accuracy, while assuring fleet compatibility. |  |
| Datacolor 800™ | Datacolor | The only true close tolerance spectrophotometer with embedded processor and data storage, offering increased efficiency and color measurement confidence, best-in-class precision and accuracy, while assuring fleet compatibility. |  |
| ADDITOL® WT 100 DF-M | Allnex | ADDITOL® WT 100 DF-M is a water and waste water treatment defoamer. Mineral oil / wax – emulsion (50% active). For all WW treatment process stages. Highly compatible. Best cost – effective balance. | Request Sample |
| Datacolor CHECK 3 | Datacolor | Datacolor CHECK 3 portable spectrophotometer offers best-in-class color measurement performance that’s ideal for the formulation and quality control needs of color professionals in the paint, coatings, plastics and textile industries. |  |
| Multiwet™ SO - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SO - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SO offers excellent wetting with a low VOC content and is best in class at solids wetting. | |
| CALGON® TK | ICL Phosphate Specialty | CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for a...view more CALGON® TK is a dispersing agent for emulsion paints, plasters and adhesives. It is a white, hygroscopic granulate. This product offers the following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for all aqueous building paints and plasters, caused by the excellent storage stability CALGON® TK is best suitable for the application within silicate paints. It prevents white shadings and carbonatisation of external wall paints, and it can be applied in combination with polyacrylates like LOPON® 890. view less | Request Sample |
| Multiwet™ BD - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ BD - Multifunctional wetting agent is a non-silicone and non-fluorinated multifunctional surfactant. Multiwet BD offers excellent wetting of clean, unprepared or low energy substrates and is best in class for biodegradability. | |
| Multiwet™ VE - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ VE - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet VE offers excellent wetting of clean, unprepared and low energy surfaces and is best in class for versatility. | |
| Multiwet™ EF - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ EF - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet EF offers excellent wetting with a very low critical micelle concentration and is the best in class for efficiency. | |
| Multiwet™ SU - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SU - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SU offers excellent wetting especially of clean and low energy substrates and is best in class for substrate wetting. | |
| Datacolor 650™ | Datacolor | The Datacolor 650 is the ultimate flexible spectrophotometer, featuring unparalleled accuracy for both Reflection and transmission - the perfect solution for plastics and dye manufacturers requiring the best results for colour matching a wide variety of m...view more The Datacolor 650 is the ultimate flexible spectrophotometer, featuring unparalleled accuracy for both Reflection and transmission - the perfect solution for plastics and dye manufacturers requiring the best results for colour matching a wide variety of materials. view less |  |
| Michem® Emulsion 94340 | Michelman | Michem® Emulsion 94340 is a phenol free additive best used in floor polish and overprint varnish formulations when a high degree of slip resistance is needed. It also provides durability and scratch resistance to wood applications. | |
| WHR-120 Polyketone Resin | Yueyang Dongrun Chemical Co., Ltd. | WHR-120 Polyketone Resin is a condensation product from cyclohexanone which is bright and resistant to hydrolysis. Polyketone resins are best suited for ink, coatings, and pigment pastes. It has a colourity of (GB/T 12007.1-1989). | |
| BECKOPOX™ EM 460/60IBX | Allnex | Beckopox® EM 460/60IBX is an excellent adhesion to steel and nonferrous metals, high corrosions protection, best recoatability. It is used preferably in combination with polyvinyl butyral (PVB) for the production of wash primers and finish coatings. | Request Sample |
| PLIOTEC® GAR130 | Omnova Solutions | PLIOTEC® GAR130 is a water-based, one-part, epoxy-modified acrylic resin. It provides excellent adhesion for vertical and horizontal concrete substrates including garage floors. This product delivers best-in-class hot tire pickup and chemical resistance. | |
| Budit 3 | BassTech International | Budit 3 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 3H | BassTech International | Budit 3H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4 | BassTech International | Budit 4 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4H | BassTech International | Budit 4H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6 | BassTech International | Budit 6 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6H | BassTech International | Budit 6H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7 | BassTech International | Budit 7 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7H | BassTech International | Budit 7H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 8H | BassTech International | Budit 8H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 9 | BassTech International | Budit 9 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Coloray™ CR5301 Yellow Gold | Coloray (Zhejiang) Technology Development Co., Ltd. | Coloray™ CR5301 Yellow Gold is natural mica based and coated with both titanium dioxide and iron oxide. Its particle size is 10-60 microns. Its effect is yellow golden pearlescent luster. It is the best seller of Golden Series. | Request Sample |
| POLYRON® TK | ICL Phosphate Specialty | POLYRON® TK is a dispersing agent for emulsion paints, plasters, and adhesives. This white, hygroscopic granulate is a tetrapotassium diphosphate. POLYRON® TK offers following advantages: low and rapid end viscosity of dispersing process, is best suitable...view more POLYRON® TK is a dispersing agent for emulsion paints, plasters, and adhesives. This white, hygroscopic granulate is a tetrapotassium diphosphate. POLYRON® TK offers following advantages: low and rapid end viscosity of dispersing process, is best suitable as dispersing agent for all aqueous building paints and plasters. Caused by the excellent storage stability, POLYRON® TK is best suitable for the application within silicate paints. It prevents white shadings and carbonatisation of external wall paints, and it can be applied in combination with polyacrylates like LOPON® 890. The usual dosage of POLYRON TK is 0.1 – 0.3 %, calculated on solid content view less | Request Sample |
| Michem® Dispersion 91530 | Michelman | Michem® Dispersion 91530 is an acrylic resin dispersion. This additive is best used as a leveling aid, gloss enhancer and for buffability and mar resistance for the floor finish industry. It is also effective for gloss enhancement for auto polish formulas...view more Michem® Dispersion 91530 is an acrylic resin dispersion. This additive is best used as a leveling aid, gloss enhancer and for buffability and mar resistance for the floor finish industry. It is also effective for gloss enhancement for auto polish formulas. view less | |
| F-80 Polyaldehyde Resin | Yueyang Dongrun Chemical Co., Ltd. | F-80 Polyaldehyde resin is a condensation product from aliphatic and urea which is bright and resistant to hydrolysis. Polyaldehyde resins are best suited for ink, coatings, and pigment pastes. It has a Color Number of (ISO 4630-1:2004). | |
| F-100 Polyaldehyde Resin | Yueyang Dongrun Chemical Co., Ltd. | F-100 Polyaldehyde resin is a condensation product from aliphatic and urea which is bright and resistant to hydrolysis. Polyaldehyde resins are best suited for ink, coatings, and pigment pastes. It has a Color Number of (ISO 4630-1:2004). | |
| N3D-T1100 | Sartomer Americas | N3D-T1100 is a low viscosity formulation designed for high-temperature applications. Its high temperature mechanical property retention makes it one of the best starting points for formulators interested in temperature-sensitive part production such as mo...view more N3D-T1100 is a low viscosity formulation designed for high-temperature applications. Its high temperature mechanical property retention makes it one of the best starting points for formulators interested in temperature-sensitive part production such as molding, tooling and electronic applications. view less | |
| KELSOL® 3912-G4-75 | Polynt Composites | KELSOL® 3912-G4-75 is a water reducible alkyd designed to give higher solids at lower viscosity. It must be neutralized prior to the addition of water, and usually requires additional co-solvent for best solubility and stability in water thinned paints. | |
| CH-5800 Insulating Glass Sealant | Yangzhou Chenhua New Material CO., LTD. | CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and oz...view more CH-5800 Insulating Glass Sealant is a two-component, high intensity, high modulus, low permeability curing glass sealant. This product is used best on glass, metals, and marble. CH-5800 Insulating Glass Sealant provides weather, aging, ultraviolet, and ozone resistance as a sealant. view less | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM is an activated SILFIT Z 91 that can be used as a functional filler either on its own or combined with extenders or matting agents. The best effect is achieved in binder systems which polymerize or cure due to a radically initiated reaction. | |
| EP0004 Natural Puff Base | Rutland Plastics Technologies Inc. | EP0004 Natural Puff Base is a direct print puff ink designed to maintain colors. It is a press ready plastisol, prints easily, and gives best results when put through a 60 megacoulomb inch mesh count. This product is user friendly, and does not require mo...view more EP0004 Natural Puff Base is a direct print puff ink designed to maintain colors. It is a press ready plastisol, prints easily, and gives best results when put through a 60 megacoulomb inch mesh count. This product is user friendly, and does not require modifications. view less | |
| AP-Cat 0043 | FTC Korea Co.,Ltd | AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and ...view more AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and PVC and general industrial coatings. view less | Request Sample |
| AP-Cat 0043L | FTC Korea Co.,Ltd | AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and ...view more AP-Cat 0043 is an excellent catalyst for rigid polyurethane foam manufacture with amine type catalysts. It also is an excellent initial lubricity and weatherability. It has non-bleeding and best gelling properties. It is suitable for use in lubricant and PVC and general industrial coatings. view less | Request Sample |
| CV-1148 | NuSil Silicone Technology 1 | CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlin...view more CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlined by NASA and the European Space Agency. view less | |
| KELSOL® 3906-B2G2-70 | Polynt Composites | KELSOL® 3906-B2G2-70 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility a...view more KELSOL® 3906-B2G2-70 is a water-dispersible alkyd designed to give excellent corrosion resistance as well as early water-spot resistance. It must be neutralized prior to the addition of water and usually requires additional cosolvent for best solubility and stability in water-thinned paints. view less | |
| VINAVIL® PA2000 | VINAVIL Americas Corp. | VINAVIL® PA2000 is a hydrophobically modified alkali swellable emulsion (HASE) that can be used as a rheology modifier in water-based paints, textile coatings, and construction products. This product works best when neutralized with potassium, ammonium, ...view more VINAVIL® PA2000 is a hydrophobically modified alkali swellable emulsion (HASE) that can be used as a rheology modifier in water-based paints, textile coatings, and construction products. This product works best when neutralized with potassium, ammonium, or sodium hydroxides at a pH between 7.0 and 10.0. view less | |
| CV7-2289-1 | NuSil Silicone Technology 1 | CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical sy...view more CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical systems against environmental hazards such as vibration, shock, dust and chemicals. view less | |
| EP9001 NPT LB White Puff | Rutland Plastics Technologies Inc. | EP9001 NPT LB White Puff is a white direct print puff ink designed to maintain colors. It is a press ready plastisol, prints easily, and gives best results when put through a 60 megacoulomb inch mesh count. This product is user friendly, and does not requ...view more EP9001 NPT LB White Puff is a white direct print puff ink designed to maintain colors. It is a press ready plastisol, prints easily, and gives best results when put through a 60 megacoulomb inch mesh count. This product is user friendly, and does not require modifications. view less | |
| CV-1143 | NuSil Silicone Technology 1 | CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical j...view more CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical joints that require a non-slumping, and one-part materials. view less | |
| Coloray™ CR5205 Super Gold | Coloray (Zhejiang) Technology Development Co., Ltd. | Coloray™ CR5205 Super Gold is a pigment from the Coloray Interference Series. It is mica-based and coated with titanium dioxide, which presents a color of interference gold. It is one of the best-selling pigments from Coloray, and is widely used in paints...view more Coloray™ CR5205 Super Gold is a pigment from the Coloray Interference Series. It is mica-based and coated with titanium dioxide, which presents a color of interference gold. It is one of the best-selling pigments from Coloray, and is widely used in paints, plastics, inks, leathers and other applications. view less | Request Sample |
| Organosilane 2A301 | Dalian Onichem Co., Ltd. | Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This p...view more Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This product is suitable for use with acrylic, isocyanate, polyurethane, ABS, PVC, and styrene polymers. view less | Request Sample |
| KELSOL® 3969-G2-70 | Polynt Composites | KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents. Additional co-solvent beyond what is supplied in KELSOL® 3969 is usually required for the best...view more KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents. Additional co-solvent beyond what is supplied in KELSOL® 3969 is usually required for the best solubility and stability. view less | |
| Michem® Emulsion 67235 | Michelman | Michem® Emulsion 67235 is a nonionic, high density polyetheylene emulsion best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven very effective for mar resistance in floor polish fo...view more Michem® Emulsion 67235 is a nonionic, high density polyetheylene emulsion best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven very effective for mar resistance in floor polish formulations, as well as mar resistance and shine in car polish formulations. view less | |
| PAT-ADD DA 2025 | Patcham USA | PAT-ADD DA 2025 is a deflocculating wetting and dispersing agent for use in pigmented and filled PVC plastisols. Main benefits are: spontaenous, fast pigment wetting properties in high loaded pigment concentrates, optimizes mixing process, enabling high pigment loading and best...view more PAT-ADD DA 2025 is a deflocculating wetting and dispersing agent for use in pigmented and filled PVC plastisols. Main benefits are: spontaenous, fast pigment wetting properties in high loaded pigment concentrates, optimizes mixing process, enabling high pigment loading and best color development; and minimizes predisposition of settling/hard-packed sedimentation. view less | Request Sample |
| Permanent Orange GC1301 | Hangzhou Geecolor Chemical Co., Ltd | Permanent Orange GC1301 is an orange pigment that is semi-opaque and has good fastness to heat and solvents. This product is best utilized in water-based decorative paints and industrial paints. It possesses strong physical properties with a density of 1....view more Permanent Orange GC1301 is an orange pigment that is semi-opaque and has good fastness to heat and solvents. This product is best utilized in water-based decorative paints and industrial paints. It possesses strong physical properties with a density of 1.4-1.5 g/cm3 and a pH value of 6.5-7.5. view less | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...view more CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. view less | |
| R-2370 | NuSil Silicone Technology 1 | R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight ...view more R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight foam with exceptional electrical and thermal properties. view less | |
| DORKAFILL® C1 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORKAFILL® C1 is a calcined kaolin.Within the DORKAFILL-series DORKAFILL® C1 is characterized by its small particle size (D50: 1.5 µm) and high grade of brightness. DORKAFILL® C1 is suitable for silk-matt paints. Within the DORKAFILL-product group, DORKAFILL® C1 shows the best...view more DORKAFILL® C1 is a calcined kaolin.Within the DORKAFILL-series DORKAFILL® C1 is characterized by its small particle size (D50: 1.5 µm) and high grade of brightness. DORKAFILL® C1 is suitable for silk-matt paints. Within the DORKAFILL-product group, DORKAFILL® C1 shows the best contribution to hiding and spacing TiO2. view less | |
| Lysopac Yellow 9410C | Ferro Pigments | Lysopac Yellow 9410C is a green shade yellow benzimidazolone pigment of very good light- and weathering fastness properties. Lysopac Yellow 9410C offers among all the available pigments in the same color index the best hiding power and color strength, thu...view more Lysopac Yellow 9410C is a green shade yellow benzimidazolone pigment of very good light- and weathering fastness properties. Lysopac Yellow 9410C offers among all the available pigments in the same color index the best hiding power and color strength, thus enabling the economic usage. 9410C is particularly recommended for general industrial coatings. view less | |
| SILZOT® FS-X1 | AlzChem AG | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best...view more SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. view less | |
| UCECOAT® 7788 | Allnex | UCECOAT® 7788 is a Tin-free, VOC free, aliphatic polyurethane dispersion, characterized by best-in-class cost/performance balance, excellent dispersion stability, and versatility in use. It is ideally suited for industrial coatings applied by spray, curta...view more UCECOAT® 7788 is a Tin-free, VOC free, aliphatic polyurethane dispersion, characterized by best-in-class cost/performance balance, excellent dispersion stability, and versatility in use. It is ideally suited for industrial coatings applied by spray, curtain- or roller coater. This product can be formulated as such or in combination with various blending partners. view less | Request Sample |
| Novares® HA 2500 | Rain Carbon Germany GmbH | Novares® HA 2500 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as coal tar replacement and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and...view more Novares® HA 2500 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as coal tar replacement and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Detailed information is available upon request. view less | |
| KELSOL® 3907-B2G2-75 | Polynt Composites | KELSOL® 3907-B2G2-75 is a fast-drying, water-dispersible, HAPs-free alkyd designed to give early hardness and good humidity resistance. Additional co-solvent is required for the best solubility and stability in paint formulations. Normal butanol or a blen...view more KELSOL® 3907-B2G2-75 is a fast-drying, water-dispersible, HAPs-free alkyd designed to give early hardness and good humidity resistance. Additional co-solvent is required for the best solubility and stability in paint formulations. Normal butanol or a blend of n-butanol and butoxy ethanol is required for optimum stability and film performance. view less | |
| KELSOL® 3969-G4-70 | Polynt Composites | KELSOL® 3969-G4-70 is a water-dispersible, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance. It is supplied in butoxy ethanol, a non-HAPs, high flash point solvent. Additional co-solvent beyond what is supplied in KELSOL® 3969 is usually required for the best...view more KELSOL® 3969-G4-70 is a water-dispersible, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance. It is supplied in butoxy ethanol, a non-HAPs, high flash point solvent. Additional co-solvent beyond what is supplied in KELSOL® 3969 is usually required for the best solubility and stability. view less | |
| Michem® Emulsion 93235 | Michelman | Michem® Emulsion 93235 is a nonionic polyethylene emulsion. This phenol free additive is best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven very effective for mar resistance in ...view more Michem® Emulsion 93235 is a nonionic polyethylene emulsion. This phenol free additive is best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven very effective for mar resistance in floor polish formulations as well as mar resistance and shine in car polish formulations. view less | |
| R-2182 | NuSil Silicone Technology 1 | R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone substrates and results in a reduction of surface tack. It is best...view more R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone substrates and results in a reduction of surface tack. It is best to apply by spraying or dipping. view less | |
| Hydrous Kaolin GB-K80 for Paint | Golden Bright Enterprise Co. Ltd. | Hydrous Kaolin GB-K80 for Paint, hydrous kaolin, has features of good crystallization and decentrality, high purity, minor particles, and moderate oil absorption capacity and is easy to disperse in water and oil systems. It can be used as a functional additive and can partially replace titanium dioxides. It is the best...view more Hydrous Kaolin GB-K80 for Paint, hydrous kaolin, has features of good crystallization and decentrality, high purity, minor particles, and moderate oil absorption capacity and is easy to disperse in water and oil systems. It can be used as a functional additive and can partially replace titanium dioxides. It is the best filler for the paint and ink industries. view less | |
| Manganese Antimony Titanium Buff Rutile Pigment Yellow 164 MMOY16401 | Hangzhou Epsilon Chemical Co., Ltd. | MMOY16401 is a Manganese Antimony Titanium Brown pigment with high tinting strength. It is one of the best weathering Brown pigments known. It has excellent chemical resistance, outdoor durability, light-fastness, heat stability and is non-bleeding and no...view more MMOY16401 is a Manganese Antimony Titanium Brown pigment with high tinting strength. It is one of the best weathering Brown pigments known. It has excellent chemical resistance, outdoor durability, light-fastness, heat stability and is non-bleeding and non-migratory. Recommended for RPVC, Polyolefins, Engineering Resins, Paints and Coatings including General Industrial, Coil and Extrusion coatings, etc. view less | |
| Novares® HA 1100 | Rain Carbon Germany GmbH | Novares® HA 1100 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applicat...view more Novares® HA 1100 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Detailed information is available upon request. view less | |
| Novares® HA 2100 | Rain Carbon Germany GmbH | Novares® HA 2100 is based on on aromatic hydrocarbons modified with phenolic OH groups. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are ...view more Novares® HA 2100 is based on on aromatic hydrocarbons modified with phenolic OH groups. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals.Detailed information is available upon request. view less | |
| Novares® HA 2200 | Rain Carbon Germany GmbH | Novares® HA 2200 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applicat...view more Novares® HA 2200 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Detailed information is available upon request. view less | |
| Novares® HA 30 | Rain Carbon Germany GmbH | Novares® HA 30 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applicatio...view more Novares® HA 30 is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged as VOC free coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Detailed information is available upon request. view less | |
| Amicure® IC-186 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC-186 is designed to cure with standard HDI Trimer. When formulated, Amicure® IC-186-based clear and pigmented coatings exhibit rapid property development. The unique feature of this product is its best in class potlife compared to typical polya...view more Amicure® IC-186 is designed to cure with standard HDI Trimer. When formulated, Amicure® IC-186-based clear and pigmented coatings exhibit rapid property development. The unique feature of this product is its best in class potlife compared to typical polyaspartics. The coatings based on Amicure® IC-186 resins can be spray applied using conventional and airless spray. view less | Request Sample |
| Octosperse TS-10 | Tiarco Chemical | Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...view more Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. The eventual concentration can be established which is the most economical and efficient for a given system. view less | |
| GEL-3500 | NuSil Silicone Technology 1 | GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requirements. This product is best...view more GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requirements. This product is best utilized in applications that would require a gel that has a solvent resistance. view less | |
| NETZSCH-Beads | NETZSCH Grinding & Dispersing | The selection of the appropriate grinding beads is an outstanding characteristic for optimizing dispersing and wet grinding processes with agitator bead mills. NETZSCH-Beads offer the best grinding results. With the grinding beads ideally adapted to NETZS...view more The selection of the appropriate grinding beads is an outstanding characteristic for optimizing dispersing and wet grinding processes with agitator bead mills. NETZSCH-Beads offer the best grinding results. With the grinding beads ideally adapted to NETZSCH agitator bead mills and all important qualities being available in the requested sizes an optimum in the combination of machine, grinding tool and application is achieved. view less |  |
| Hydrous Kaolin Gb-K96 for Paint | Golden Bright Enterprise Co. Ltd. | Hydrous Kaolin Gb-K96 for Paint, hydrous kaolin, has features of good crystallization and decentrality, high purity, minor particles, and moderate oil absorption capacity and is easy to disperse in water and oil systems. It can be used as functional additives and partially replace titanium dioxides, and is the best...view more Hydrous Kaolin Gb-K96 for Paint, hydrous kaolin, has features of good crystallization and decentrality, high purity, minor particles, and moderate oil absorption capacity and is easy to disperse in water and oil systems. It can be used as functional additives and partially replace titanium dioxides, and is the best filler for paint, ink industry. It has brightness (YQ-Z48B) at 85%. view less | |
| Vertical Blender | Charles Ross & Son Company | Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blendin...view more Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blending action of the slow-turning blending screw is far more gentle than the agitators in a Ribbon Blender of the same working volume. view less |  |
| E 588-AR | Silberline Manufacturing Co., Inc. | E 588-AR is an aluminum pigment paste with a coarse, corn-flake particle size. This product is designed to exhibit sparkle in automotive O.E.M. and refinish systems. Dispersion of E 588-AR is best achieved by low energy stirring, using a slow speed blade ...view more E 588-AR is an aluminum pigment paste with a coarse, corn-flake particle size. This product is designed to exhibit sparkle in automotive O.E.M. and refinish systems. Dispersion of E 588-AR is best achieved by low energy stirring, using a slow speed blade capable of moving the entire mass. This product is non-leafing and 60% non-volatile by weight. view less | |
| EXAKT 50 Classic | EXAKT Technologies Inc. | The EXAKT 50 Classic guarantees the finest results in pharmaceutical ointment production. The equipment can be used for producing suspensions, emulsions and creams. Also ointments that contain large crystalline particles can easily be processed with the EXAKT 50 Classic. With more that 30,000 systems installed around the world, the EXAKT 50 Classic is the best...view more The EXAKT 50 Classic guarantees the finest results in pharmaceutical ointment production. The equipment can be used for producing suspensions, emulsions and creams. Also ointments that contain large crystalline particles can easily be processed with the EXAKT 50 Classic. With more that 30,000 systems installed around the world, the EXAKT 50 Classic is the best known and most accepted pharmaceutical ointment mill. view less | |
| R-1140 | NuSil Silicone Technology 1 | R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces and other silicone rubbers. It is best...view more R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces and other silicone rubbers. It is best used for applications that require an operating temperature rang of 65 to 240°C (-85 to 465°F). view less | |
| BECKOPOX™ EH 2189w/50WA | Allnex | Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best...view more Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best results. view less | Request Sample |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best...view more CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. view less | |
| R-1182 | NuSil Silicone Technology 1 | R-1182 is a low coefficient of friction silicone coating and is cured with acetoxy. This product cures to a smooth silicone film that decreases the coefficient of friction (CoF) and increases abrasion resistance for moving, sliding, and rubbing parts. It will provide a RTV, low friction coating on cured silicone substrates. For the best...view more R-1182 is a low coefficient of friction silicone coating and is cured with acetoxy. This product cures to a smooth silicone film that decreases the coefficient of friction (CoF) and increases abrasion resistance for moving, sliding, and rubbing parts. It will provide a RTV, low friction coating on cured silicone substrates. For the best results this coating needs to be applied by spraying or dipping. view less | |
| VINAVIL® 2433 | VINAVIL Americas Corp. | VINAVIL® 2433, in the form of a clear film, is an anionic vinyl/acrylic copolymer emulsion containing high solids that can be used in pressure-sensitive adhesives. It is compatible with a wide variety of substrates, including metals and plastics, and works best...view more VINAVIL® 2433, in the form of a clear film, is an anionic vinyl/acrylic copolymer emulsion containing high solids that can be used in pressure-sensitive adhesives. It is compatible with a wide variety of substrates, including metals and plastics, and works best with non-polar surfaces such as polypropylene or polyethylene. This product can be used both for permanent and temporary labeling applications. view less | |
| R-1505 | NuSil Silicone Technology 1 | R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protect...view more R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protection from extremes in humidity, temperature, radiation, thermal stress and mechanical stress. It can also be utilized as a shielding for RFI and EMI in electronic applications. view less | |
| CV1-1142-4 | NuSil Silicone Technology 1 | CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensit...view more CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. The product also has a built in UV tracer and it can be used for applications that require a broad operating temperature range. view less | |
| Resiflow® LV-67 | Estron Chemical, Inc. | Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best...view more Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best processing method and the optimum concentration of the additive. view less | |
| Datacolor 45G | Datacolor | The Datacolor 45G provides simultaneous control of color and gloss with best-in-class repeat- ability. With its integrated gloss capabilities, the portable Datacolor 45G spectrophotometer enables complete appearance control for consistent and accurate cor...view more The Datacolor 45G provides simultaneous control of color and gloss with best-in-class repeat- ability. With its integrated gloss capabilities, the portable Datacolor 45G spectrophotometer enables complete appearance control for consistent and accurate correlation to visual assessment. Ideal for inspection and control of total color appearance for retail hard goods, large appliances, and consumer electronics involving plastic parts, painted surfaces and coil coatings. view less |  |
| NOVINOX CAS06 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX CAS06 is a corrosion-inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with low tinting strength. NOVINOX CAS06 has been developed as a non-toxic and Eco-Friendly alternative to Strontium chromate in Coil Coatings. Compatible with PU and PE/Melamine systems, NOVINOX CAS06 is our best...view more NOVINOX CAS06 is a corrosion-inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with low tinting strength. NOVINOX CAS06 has been developed as a non-toxic and Eco-Friendly alternative to Strontium chromate in Coil Coatings. Compatible with PU and PE/Melamine systems, NOVINOX CAS06 is our best high performance and cost effective alternative to Strontium chromate in Coil Coatings. view less | Request Sample |
| Resiflow® PF-67 | Estron Chemical, Inc. | Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PF-67 into powder coating formulations. This product is best...view more Resiflow® PF-67 is a flow control agent used primarily in general industrial powder coating applications. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 0.7-1.5% of Resiflow® PF-67 into powder coating formulations. This product is best suited for hybrid technology, but can be used in other binder systems such polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Novares® HA 1200-L | Rain Carbon Germany GmbH | Novares® HA 1200-L is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are ...view more Novares® HA 1200-L is based on on aromatic hydrocarbons modified with phenolic OH functionalities. It is desinged coal tar replacement with better labeling and provides great compatibility with epoxy and polyurethane systems. Best known applications are sealing compounds and corrosion protection paints to increase hydrophobicity, flexibility and adhesion on metals. Low viscous alternative to Novares HA 2100 (contains Xylene). Detailed information is available upon request. view less | |
| FOAMSTAR® ST 2446 | BASF Formulation Additives | FOAMSTAR® ST 2446 is based on a patented hyper-branched Star polymer compounded with high-end organo-silicone polymers. It is one of our best defoamers for zero to 50 g/l VOC, medium to low PVC premium paints. FOAMSTAR® ST 2446 is a product of choice when...view more FOAMSTAR® ST 2446 is based on a patented hyper-branched Star polymer compounded with high-end organo-silicone polymers. It is one of our best defoamers for zero to 50 g/l VOC, medium to low PVC premium paints. FOAMSTAR® ST 2446 is a product of choice when other defoamers do not work. It allows for very good film appearance properties despite its very high efficiency. view less | |
| Fluoron™ 960 A | Lawter | Fluoron™ 960 A is an ultra-fine PTFE dispersed in a fast-setting resinated vehicle that is formulated to give the best rub resistance and lubricity in inks. It has good slip and heat, abrasion and mar resistance properties while showing minimal effect on ...view more Fluoron™ 960 A is an ultra-fine PTFE dispersed in a fast-setting resinated vehicle that is formulated to give the best rub resistance and lubricity in inks. It has good slip and heat, abrasion and mar resistance properties while showing minimal effect on rheology and gloss. Fluoron™ 960 A is ideally suited for use in heatset offset inks, in sheet-fed offset inks and in overprint varnishes. view less | |
| R-1008-0 | NuSil Silicone Technology 1 | R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best...view more R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-4 | NuSil Silicone Technology 1 | R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best...view more R-1008-4 is an orange, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-5 | NuSil Silicone Technology 1 | R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best...view more R-1008-5 is a yellow, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-6 | NuSil Silicone Technology 1 | R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best...view more R-1008-6 is a green, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-7 | NuSil Silicone Technology 1 | R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best...view more R-1008-7 is a blue, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less | |
| R-1008-8 | NuSil Silicone Technology 1 | R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best...view more R-1008-8 is a violet, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). view less |
