UL Prospector

Success!

Successfully saved your search
111 Results
Akuacure 4002B T&L Co., Ltd. Polymer Technology Centre Akuacure 4002B is a water-dispersible blocked isocyanate ideal for use in 1K baking system applications - including adhesives, paints, and coatings.
Trixene BI 7772 Baxenden Chemicals Ltd. Trixene BI 7772 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance.
Trixene BI 7770 Baxenden Chemicals Ltd. Trixene BI 7770 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance.
Trixene BI 7774 Baxenden Chemicals Ltd. Trixene BI 7774 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance.
Trixene BI 7779 Baxenden Chemicals Ltd. Trixene BI 7779 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance.
Polurene MBD 2 S.A.P.I.C.I. SpA Polurene MBD 2 is a blocked isocyanate. This product should be used in non-yellowing 1K stoving enamels. It can be used in traditional stoving enamels in order to increase flexibility and adhesion.
Trixene BI 7771 Baxenden Chemicals Ltd. Trixene BI 7771 is a blocked isocyanate prepolymer cross-linker with a viscosity. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance.
K-KAT® XK-651 King Industries, Inc. K-KAT® XK-651 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate, two component urethanes, and one and two component silane terminated coatings. K-KAT® XK-651 is made to give good hydrolytic stability. This product has good ...view more K-KAT® XK-651 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate, two component urethanes, and one and two component silane terminated coatings. K-KAT® XK-651 is made to give good hydrolytic stability. This product has good gloss retention, exterior durability, can replace tin stimulants, and good solubility. It is soluble in glycol ethers, aliphatics, aromatics, has partial solubility in alcohols and esters, and is not soluble in water. It can be applied in 2K and blocked isocyanate coatings, and in the production of urethane elastomers, foams, and coatings. view less
Akuacure W3000 T&L Co., Ltd. Polymer Technology Centre Akuacure W3000 is a per-fluorine modified, water dispersible, blocked isocyanate featuring reduced surface tension and excellent water resistance. This product is ideal for use in 1K baking system applications - including adhesives, paints, and coatings.
Nourybond® 289 Adhesion Promoter Evonik Operations GmbH, BL Crosslinkers Nourybond® 289 Adhesion Promoter is a blocked isocyanate PVC plastisol adhesion promoter intended for use in automotive sealants applied to visible areas and anti-chip primers. It is designed to provide adhesion to electrodeposition primers used in the m...view more Nourybond® 289 Adhesion Promoter is a blocked isocyanate PVC plastisol adhesion promoter intended for use in automotive sealants applied to visible areas and anti-chip primers. It is designed to provide adhesion to electrodeposition primers used in the manufacture of automobiles, trucks and buses. view less Request Sample
Coronate® 2507 Tosoh Corporation Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less
Coronate® 2513 Tosoh Corporation Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less
Trixene BI 220 Baxenden Chemicals Ltd. Trixene BI 220 is a nonionic aqua blocked isocyanate dispersion that is designed for water-based 1 and 2-K systems. This product can be used as an adhesion promoter and cross-linker for finishes and coatings on leather, paper, textiles, and more.
Coronate® AP-M Tosoh Corporation Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less
Coronate® BI-301 Tosoh Corporation Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals...view more Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less
K-KAT® 348 King Industries, Inc. K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...view more K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. view less
Trixene BI 200 Baxenden Chemicals Ltd. Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...view more Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less
K-KAT® XK-628 King Industries, Inc. K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appear...view more K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appears as a clear, amber liquid and is a made to give enhanced hydrolytic stability. This product offers good exterior ability, gloss retention, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is partially soluble in alcohols, esters, and is insoluble in water. This product can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams, and coatings. view less
K-KAT® XC-B221 King Industries, Inc. K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawb...view more K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawbacks. This product offers good glass retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. K-KAT® XC-B221 is soluble in butanol, ethanol, methanol, isopropanol, glycol ethers, glycol ether acetates, aliphatic and aromatic hydrocarbons, and is insoluble in water. This product appears as a clear, straw liquid and can be applied in 2K, blocked isocyanate coatings, urethane elastomers, foams, coatings, and cationic electro-coatings. view less
Trixene BI 201 Baxenden Chemicals Ltd. Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, text...view more Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less
Isocryl® H-1871 Estron Chemical, Inc. Isocryl® H-1871 is a solid, hydroxyl-functional acrylic resin specifically designed for one-shot, low to mid-gloss, exterior durable polyurethane powder coatings. Isocryl® H-1871 is used in conjunction with conventional or super-durable hydroxyl polyesters to be cured with blocked isocyanate...view more Isocryl® H-1871 is a solid, hydroxyl-functional acrylic resin specifically designed for one-shot, low to mid-gloss, exterior durable polyurethane powder coatings. Isocryl® H-1871 is used in conjunction with conventional or super-durable hydroxyl polyesters to be cured with blocked isocyanate or uretdione hardeners. view less
K-KAT® XK-640 King Industries, Inc. K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the env...view more K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the environmental drawbacks. K-KAT® XK-640 is a designed to provide improved hydrolytic stability compared to other bismuth carboxylate catalysts. This product is soluble in glycol ethers, aliphatics, and aromatics, has partial solubility in alcohols and esters, and is insoluble in water. It appears as a clear, amber liquid, is 18% metal, and can be applied in ambient, force dry and bake systems, 2K and blocked isocyanate coatings, and in the production of urethane coatings. view less
Pigmentan CC Pigmentan Pigmentan CC is an off-white non-refractive anticorrosive pigment. This product is non toxic, does not contain heavy metals, and has a pH value of 9.7 to 10.8. It can be used in solvent based coil coating primers on polyester/melamine formaldehyde and blocked isocyanate...view more Pigmentan CC is an off-white non-refractive anticorrosive pigment. This product is non toxic, does not contain heavy metals, and has a pH value of 9.7 to 10.8. It can be used in solvent based coil coating primers on polyester/melamine formaldehyde and blocked isocyanate systems. view less
Trixene BI 7950 Baxenden Chemicals Ltd. Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7950 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7992 Baxenden Chemicals Ltd. Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7992 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7674 Baxenden Chemicals Ltd. Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7674 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7963 Baxenden Chemicals Ltd. Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7963 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7982 Baxenden Chemicals Ltd. Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory sto...view more Trixene BI 7982 is a PM solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7641 Baxenden Chemicals Ltd. Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7641 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less
Trixene BI 7961 Baxenden Chemicals Ltd. Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fa...view more Trixene BI 7961 is a C9 aromatic solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7991 Baxenden Chemicals Ltd. Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under fact...view more Trixene BI 7991 is a PM solvent-based hybrid aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7675 Baxenden Chemicals Ltd. Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured u...view more Trixene BI 7675 is a PMA solvent-based aromatic blocked isocyanate crosslinker abrasive binder. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7951 Baxenden Chemicals Ltd. Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under...view more Trixene BI 7951 is a C9 Aromatic/BA solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7960 Baxenden Chemicals Ltd. Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured und...view more Trixene BI 7960 is a PM/ethyl acetate solvent-based aliphatic blocked isocyanate crosslinker. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components used in the automotive and consumer goods industries. view less
Trixene BI 7642 Baxenden Chemicals Ltd. Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are...view more Trixene BI 7642 is a PMA/Xylene solvent-based aromatic blocked isocyanate crosslinker with a viscosity of 25,000. It is used for hydroxyl-functional resins such as acrylic, polyester, urethane, and is usually formulated into 1-K coatings. The coatings are dried and cured under factory stoving conditions for OEM metal components and used in the automotive and consumer goods industries. view less
XOANONS® WE-D9542N Anhui Xoanons Chemical Co., Ltd. XOANONS® WE-D9542N is a silicone modified polyacrylate with hydroxy group. It is an anti-graffiti and easy-cleaning additive for hydroxyl acrylic powder coating. This product can be used as a curing agent for blocked isocyanate or amino resins. It impart...view more XOANONS® WE-D9542N is a silicone modified polyacrylate with hydroxy group. It is an anti-graffiti and easy-cleaning additive for hydroxyl acrylic powder coating. This product can be used as a curing agent for blocked isocyanate or amino resins. It imparts excellent performance of resistance of oil-pen wipe, blocking resistance, hydrophobicity and oleophobicity. It also prolongs bake time to improve anti-graffiti property. view less
K-KAT® XK-614 King Industries, Inc. K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing...view more K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing time qualities. It also has good hydrolytic stability and exterior durability. This product has non-yellowing ability and great gloss retention characteristics. It appears as a light, yellow liquid, is soluble in alcohols, and is insoluble in water. view less
K-KAT® XK-639 King Industries, Inc. K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...view more K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 50% active in isopropanol, weighs 7.6 lbs per gallon, and has a specific gravity of 0.91 g/ml. view less
K-KAT® XK-635 King Industries, Inc. K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...view more K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 100% active, weighs 9.5 lbs per gallon, and has a specific gravity of 1.14 g/ml. view less
K-FLEX® XM-337 King Industries, Inc. K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...view more K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. view less
W1K-1000 US Polymers - Accurez LLC W1K-1000 is 45% NV water reducible polyester polyol intended for use in a single package system. This polyester polyol is supplied at 45% non-volatile in water and n-Methyl Pyrrolidone. Conventional melamine or urea-formaldehyde crosslinking resins like hexamethoxy methyl melamine are recommended. The need for special melamines is not necessary. Other crosslinkers that may find use, are blocked isocyanate...view more W1K-1000 is 45% NV water reducible polyester polyol intended for use in a single package system. This polyester polyol is supplied at 45% non-volatile in water and n-Methyl Pyrrolidone. Conventional melamine or urea-formaldehyde crosslinking resins like hexamethoxy methyl melamine are recommended. The need for special melamines is not necessary. Other crosslinkers that may find use, are blocked isocyanate resins designed for water based systems. When properly formulated and processed, W1K-1000 can produce VOC compliant, melamine crosslinked baking enamels with an excellent balance of hardness , flexibility and adhesion over a variety of substrates. view less Request Sample
K-FLEX® XM-332 King Industries, Inc. K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...view more K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. view less
1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) GRACE 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the c...view more 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the catalyst. SHIELDEX® C 303 is a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. The 1-Pack-Polyurethane primer was tested on Bonder 1303 treated galvanised steel test panels (ex Chemetall) at a bar coated dry film thickness of 5 microns. Cure was to a peak metal temperature (PMT) of 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 °C. view less
Polurene BK 50 AE S.A.P.I.C.I. SpA Polurene BK 50 AE is a TDI-based polymer containing blocked and curable isocyanic groups. This product can be used as an adhesive in non-woven fabrics, PVC, and fabric laminations, among other uses. It contains 50% non-volatiles.
Ekosol ES 2500 T&L Co., Ltd. Polymer Technology Centre Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applicat...view more Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applications. view less
Ekosol ES 1500T T&L Co., Ltd. Polymer Technology Centre Ekosol ES 1500T is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and high transparency. This product is ideal for use in direct screen printing ink applications.
Ekosol ES 5300W T&L Co., Ltd. Polymer Technology Centre Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...view more Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. view less
Ekosol ES 2600 T&L Co., Ltd. Polymer Technology Centre Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications...view more Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications. view less
Ekosol ES 3450A T&L Co., Ltd. Polymer Technology Centre Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...view more Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. view less
Ekosol ES 1000 T&L Co., Ltd. Polymer Technology Centre Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synth...view more Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synthetic leather coatings. view less
Uralac® P 6504 DSM Coating Resins, LLC. Uralac® P 6504 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, caprolactam blocked 80/20 type, for architectural and industrial purposes. Request Sample
Alcure® 4470 Polynt Composites Alcure® 4470 is a polymeric aliphatic isocyanate hardener based on IPDI and blocked with triazole.
Alcure® 4400 Polynt Composites Alcure® 4400 is a polymeric aliphatic isocyanate hardener based on IPDI and blocked with e-caprolactam.
Alcure® 4402 Polynt Composites Alcure® 4402 is a polymeric aliphatic isocyanate hardener based on IPDI and blocked with e-caprolactam.
Alcure® 4431 Polynt Composites Alcure® 4431 is a polymeric aliphatic isocyanate hardener based on H12MDI and blocked with e-caprolactam.
Alcure® 4450 Polynt Composites Alcure® 4450 is a polymeric aliphatic isocyanate hardener based on TDI and blocked with e-caprolactam.
Alcure® 4430 Polynt Composites Alcure® 4430 is a polymeric aliphatic isocyanate hardener based on H12MDI and blocked with e-caprolactam.
Uralac® P 1630 DSM Coating Resins, LLC. Uralac® P 1630 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 85/15 type, caprolactam blocked for industrial purposes. Request Sample
Uralac® P 1680 DSM Coating Resins, LLC. Uralac® P 1680 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 85/15 type, caprolactam blocked for architectural purposes. Request Sample
Uralac® P 1650 DSM Coating Resins, LLC. Uralac® P 1650 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 85/15 type, caprolactam blocked for architectural and industrial purposes. Request Sample
Uralac® P 1420 DSM Coating Resins, LLC. Uralac® P 1420 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 80/20 type, caprolactam free (internally) blocked for architectural and industrial purposes. Request Sample
Uralac® P 5504 DSM Coating Resins, LLC. Uralac® P 5504 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 80/20 type, caprolactam- as well as internally blocked. Suitable for architectural and industrial purposes. Request Sample
Uralac® P 1580 DSM Coating Resins, LLC. Uralac® P 1580 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 70/30 type, caprolactam blocked for architectural and industrial purposes. Especially designed for anti-graffiti applications. Request Sample
Uralac® P 1475 DSM Coating Resins, LLC. Uralac® P 1475 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 82/18 type, caprolactam- or internally blocked. Suitable for industrial purposes. Especially designed for One Shot Matte applications in combina...view more Uralac® P 1475 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 82/18 type, caprolactam- or internally blocked. Suitable for industrial purposes. Especially designed for One Shot Matte applications in combination with Uralac® P 1425. view less Request Sample
Uralac® P 1425 DSM Coating Resins, LLC. Uralac® P 1425 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 45/55 type, for internally- and caprolactam blocked. Suitable for industrial purposes. Especially designed for One Shot Matte applications in com...view more Uralac® P 1425 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 45/55 type, for internally- and caprolactam blocked. Suitable for industrial purposes. Especially designed for One Shot Matte applications in combination with Uralac® P 1475. view less Request Sample
Uralac® P 1675 DSM Coating Resins, LLC. Uralac® P 1675 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 86/14 type, caprolactam- or internally blocked. Suitable for architectural and industrial purposes. Especially designed for One Shot Matte applic...view more Uralac® P 1675 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 86/14 type, caprolactam- or internally blocked. Suitable for architectural and industrial purposes. Especially designed for One Shot Matte applications in combination with Uralac® P 1625. view less Request Sample
Uralac® P 1625 DSM Coating Resins, LLC. Uralac® P 1625 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 45/55 type, for internally- and caprolactam blocked. Suitable for architectural purposes. Especially designed for One Shot Matte applications in ...view more Uralac® P 1625 is a saturated, hydroxylated polyester resin. It is ideal for use as an isocyanate cure resin, 45/55 type, for internally- and caprolactam blocked. Suitable for architectural purposes. Especially designed for One Shot Matte applications in combination with Uralac® P 1675. view less Request Sample
VESTAMIN® A 139 Evonik Operations GmbH, BL Crosslinkers VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reac...view more VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reacting with the isocyanate groups under formation of urea structures. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less Request Sample
Polurene LP 80 LV S.A.P.I.C.I. SpA Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...view more Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. view less
CRYLCOAT® 2890-0 Allnex CRYLCOAT® 2890-0 is a hydroxylated polyester resin for use with blocked isocyanates in the production of powder coatings. Coatings based on CRYLCOAT® 2890-0 exhibit outstanding flow and good outdoor durability. Request Sample
VESTANAT® EP-IPMS Evonik Operations GmbH, BL Crosslinkers VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...view more VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. view less Request Sample
Desmodur® BL 4265 SN Covestro Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relative...view more Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 4265 SN blocked polyisocyanate are used for the industrial finishing of appliances, coil coating, and can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. view less
Desmodur® BL 3175A Covestro Desmodur® BL 3175A is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in aromatic 100. Used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relatively low...view more Desmodur® BL 3175A is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in aromatic 100. Used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 3175A blocked polyisocyanate are used for the industrial finishing of appliances, coil coating, and can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. view less
Uradur™ YB147 S1 DSM Coating Resins, LLC. Uradur™ YB147 S1 is a blocked aliphatic polyisocyanate resin. Request Sample
Bayhydur® 305 Covestro Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is ...view more Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is a key requirement. view less
Bayhydur® 401-70 Covestro Bayhydur® 401-70 is a water-dispersible polyisocyanate based on Isophorone Diisocyanate (IPDI) and dissolved in 1-methoxypropylacetate-2/xylene, 1:1. It is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol range.
Polurene LP 100 LV S.A.P.I.C.I. SpA Polurene LP 100 LV is a polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and can be used to improve the flexibility of epoxy systems. It is designed for use in adhesives.
Borchi® Kat 24 Borchers, A Company of OMG Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexi...view more Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. view less
CRYLCOAT® 2842-2 Allnex CRYLCOAT® 2842-2 is a hydroxyl functional polyester resin for use with blocked isocyanates or uretdiones. Coatings based on CRYLCOAT® 2842-2 exhibit outstanding stain- detergent- and chemical resistance. Request Sample
CRYLCOAT® 4890-0 Allnex CRYLCOAT® 4890-0 is a hydroxylated, superdurable polyester resin for use with blocked isocyanates or uretdiones in the production of powder coatings. Coatings based on CRYLCOAT® 4890-0 exhibit superior outdoor durability. Request Sample
CRYLCOAT® E 04362 Allnex CRYLCOAT® E 04362 is a superdurable hydroxyl functional polyester resin for use with blocked isocyanates or uretdiones. Coatings based on this product exhibit outstanding outdoor resistance. CRYLCOAT® E 04362 is currently under development. Request Sample
Polurene LP 1810 S.A.P.I.C.I. SpA Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...view more Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. view less
VESTANAT® B 1358 A Evonik Operations GmbH, BL Crosslinkers VESTANAT® B 1358 A is a blocked, cycloaliphatic polyisocyanate. It is supplied as a 63% solution in Solvesso 100. This product is a blocked polyisocyanate for crosslinking of suitable hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT...view more VESTANAT® B 1358 A is a blocked, cycloaliphatic polyisocyanate. It is supplied as a 63% solution in Solvesso 100. This product is a blocked polyisocyanate for crosslinking of suitable hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT® B 1358 A may be classified as an exceptionally light fast and weathering resistant hardener. It is characterized by an excellent balance of reactivity and storage stability of the formulated paint. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less Request Sample
Desmodur® I Covestro Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and po...view more Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. view less
VESTANAT® B 1358/100 Evonik Operations GmbH, BL Crosslinkers VESTANAT® B 1358/100 is a solvent-free, blocked polyisocyanate, based on isophorone diisocyanate (VESTANAT IPDI). It is supplied in flakes. This product is suitable for hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT® grades are al...view more VESTANAT® B 1358/100 is a solvent-free, blocked polyisocyanate, based on isophorone diisocyanate (VESTANAT IPDI). It is supplied in flakes. This product is suitable for hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less Request Sample
Polurene LP 90 LV S.A.P.I.C.I. SpA Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...view more Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. view less
CRYLCOAT® E 04375 Allnex CRYLCOAT® E 04375 is a hydroxyl functional, superdurable polyester resin for use with blocked isocyanates or uretdiones, preferably in combination with higher functional counterparts for the production of matte one shot powder coatings. CRYLCOAT® E 04375 ...view more CRYLCOAT® E 04375 is a hydroxyl functional, superdurable polyester resin for use with blocked isocyanates or uretdiones, preferably in combination with higher functional counterparts for the production of matte one shot powder coatings. CRYLCOAT® E 04375 is currently under development. view less Request Sample
Polurene LP 100 NFF S.A.P.I.C.I. SpA Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...view more Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. view less
VESTANAT® B 1370 Evonik Operations GmbH, BL Crosslinkers VESTANAT® B 1370 is a blocked, cycloaliphatic polyisocyanate. It is supplied as a solution of 60% in n-butyl-acetate/xylene. This product is characterized by an excellent balance of reactivity and storage stability of the formulated paint. It is suitable ...view more VESTANAT® B 1370 is a blocked, cycloaliphatic polyisocyanate. It is supplied as a solution of 60% in n-butyl-acetate/xylene. This product is characterized by an excellent balance of reactivity and storage stability of the formulated paint. It is suitable for automotive OEM topcoats with improved acid etch resistance. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less Request Sample
VESTANAT® B 1358 DINP Evonik Operations GmbH, BL Crosslinkers VESTANAT® B 1358 DINP is a blocked polyisocyanate for liquid applications. It is recommended for heat-curing 1K PUR coatings. Request Sample
CRYLCOAT® 2818-0 Allnex CRYLCOAT® 2818-0 is a hydroxyl functional polyester resin with for use with blocked aliphatic and aromatic isocyanates in the production of powder coatings. CRYLCOAT® 2818-0 is also suitable for use with polyanhydride hardeners like BECKOPOX® EH 694 to ob...view more CRYLCOAT® 2818-0 is a hydroxyl functional polyester resin with for use with blocked aliphatic and aromatic isocyanates in the production of powder coatings. CRYLCOAT® 2818-0 is also suitable for use with polyanhydride hardeners like BECKOPOX® EH 694 to obtain high Tg, thermal resistant coatings. view less Request Sample
VESTANAT® EP-B 1042 E Evonik Operations GmbH, BL Crosslinkers VESTANAT® EP-B 1042 E is a blocked polyisocyanate for liquid applications. It is recommended for heat-curing 1K PUR coatings. Request Sample
VESTANAT® EP-B 1581 E Evonik Operations GmbH, BL Crosslinkers VESTANAT® EP-B 1581 E is a blocked polyisocyanate for liquid applications. It is recommended for heat-curing 1K PUR coatings. Request Sample
VESTANAT® EP-B 1481 ND Evonik Operations GmbH, BL Crosslinkers VESTANAT® EP-B 1481 ND is a caprolactam-blocked polyisocyanate for liquid applications. It is flexible, and can be used for coil coatings. Request Sample
VESTANAT® B 1186 A Evonik Operations GmbH, BL Crosslinkers VESTANAT® B 1186 A is a caprolactam-blocked polyisocyanate. It offers low yellowing even at high curing temperatures, and is approved for direct food contact in interior can applications. This product is also recommended for heat-curing 1K PUR coatings. Request Sample
AM-636 Quaker Color (a Division of McAdoo & Allen, Inc.) AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistanc...view more AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistance, and flexibility. AM-636 is solvent free and features a low viscosity for ease of integration into coating. view less
COATOSIL* 7001 SILICONE-POLYETHER BLOCK COPOLYMER Momentive COATOSIL* 7001 SILICONE-POLYETHER BLOCK COPOLYMER is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. When incorporated as a flow and leveling additive, the appearance and distinctness of i...view more COATOSIL* 7001 SILICONE-POLYETHER BLOCK COPOLYMER is an additive for improved flow and leveling of solventborne two-component acrylic-polyol isocyanate cured coatings. When incorporated as a flow and leveling additive, the appearance and distinctness of image (DOI) of the clearcoat is typically excellent, compared to current commercial additives used in the fomulations discussed. view less Request Sample
CRYLCOAT® 2839-0 Allnex CRYLCOAT® 2839-0 is a hydroxyl functional polyester resin for use with blocked poly-isocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2839-0 exhibit good mechanical, chemical and weathering resistance, good flow, g...view more CRYLCOAT® 2839-0 is a hydroxyl functional polyester resin for use with blocked poly-isocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2839-0 exhibit good mechanical, chemical and weathering resistance, good flow, good pigment and filler wetting and excellentappearance in clear powder coatings. view less Request Sample
Italester 205 Galstaff Multiresine S.p.A. Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude...view more Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude steel, galvanized and on aluminum. It complies with European legislation for indirect food contract (Swiss Ordinance RS 817.023.21 Annexx 6, Part A or B). view less
RAYCRYL® 918K Specialty Polymers, Inc. RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to react to isocyanate...view more RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to react to isocyanate and gives it chemical resistance. The primary use for this product is to be used as a topcoat and provide surfaces such as cement and wood with chemical, water and UV resistance. view less