UL Prospector

Success!

Successfully saved your search
535 Results
CATALYST 704 ASK Chemicals Catalyst 704 is a relatively volatile tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Dehydrated air as well as nitrogen are suitable carrier gases. The gas stream takes up the catalyst which is then applied ...view more Catalyst 704 is a relatively volatile tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Dehydrated air as well as nitrogen are suitable carrier gases. The gas stream takes up the catalyst which is then applied into the coating drum onto the uncured Askocoat-polyurethane layer of the fertilizer granules. Curing of the Askocoat-layer occurs within seconds. view less
CATALYST 806 ASK Chemicals Catalyst 806 is a high reactive tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Catalyst 806 has a high flash point, shows low volatility and therefore, ATEX-equipment can be avoided in most cases. Catalyst 8...view more Catalyst 806 is a high reactive tertiary amine and well suited to cure polyurethane formulations based on Askocoat technology. Catalyst 806 has a high flash point, shows low volatility and therefore, ATEX-equipment can be avoided in most cases. Catalyst 806 is applied as fine spray into the coating drum onto the uncured Askocoat-polyurethane layer of the fertilizer granules. Curing of the Askocoat-layer occurs within seconds. Catalyst 806 has functional end-groups that irreversibly react into the polyurethane coating. view less
Catalyst #3 US Polymers - Accurez LLC Catalyst #3 is a solution of paratoluene sulfonic acid that is designed for use in conjunction with Clear Rez products. Request Sample
BYK®-CATALYST 450 BYK BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especiall...view more BYK®-CATALYST 450 is an acid catalyst for solvent-borne and aqueous paint systems. It is a solution of an amine salt of para-toluene sulfonic acid. This product accelerates the crosslinking of amino resins with resins containing hydroxyl groups. Especially low reactive melamine formaldehyde resins of HMMM-type need an accelerator to lower the curing temperature or to reduce the baking time. In comparison with pure para-toluenesulfonic acid, the product shows considerably lower viscosity increase on storage which can extend shelf life 1,5 - 3 times. The additive allows a 10 to 20°C lower baking temperature compared to other blocked para-TSA catalysts (such as those with morpholine or aminomethylpropanol). view less Request Sample
CYCAT® 655 CATALYST Allnex CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYC...view more CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT 655 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT 655 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT 655 is a free acid, package stability could be adversely impacted. view less Request Sample
Nano Alumina (Catalyst Support, Ceramic Filler) Tianjin Boyuan New Materials Co., Ltd. Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in au...view more Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in automotive exhaust purification, industrial emissions processing and in the refinery industry. It can be also used as ceramic filler. It is a practical and effective product for improving the thermal stability and mechanical strength of materials. view less
CYCAT® 6020 Allnex CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor. view less Request Sample
PLACCEL 205K Daicel (U.S.A.), Inc. PLACCEL 205K is polycaplolactone diol and its molecular weight is 550. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to human he...view more PLACCEL 205K is polycaplolactone diol and its molecular weight is 550. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to human health and environment in recent years. Even if with a non-tin catalyst, polycaprolactonepolyols can be successfully obtained with quality equivalent to the case which tin catalyst is used. view less
SILCOLEASE CATA 12070 Elkem Silicones SILCOLEASE CATALYST 12070 is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems.
SILCOLEASE CATA 11091 M Elkem Silicones SILCOLEASE CATALYST 11091 M is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems.
POLYCAT® SA 20 Evonik Operations GmbH, BL Comfort & Insulation POLYCAT® SA 20 is a DBT-free low emission gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst.
PLACCEL 220CPK Daicel (U.S.A.), Inc. PLACCEL 220CPK is polycaplolactone diol and its molecular weight is 2000. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to a hum...view more PLACCEL 220CPK is polycaplolactone diol and its molecular weight is 2000. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to a human health and environment in recent years. Even if we use non-tin catalyst, we succeeded in obtaining polycaprolactonepolyols with quality equivalent to the case which tin catalyst is used. view less
CYCAT® 6030 Allnex CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor. view less Request Sample
DABCO® DC 1 Evonik Operations GmbH, BL Comfort & Insulation DABCO® DC 1 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure.
ECAT-434 Designer Molecules ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...view more ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. view less
REAXIS® C228 Reaxis Inc. REAXIS® C228 is a yellowish liquid catalyst used in polyurethane systems. This catalyst is a very active catalyst and is a less toxic analogue to REAXIS® C223 (dibutyltin diacetate). REAXIS® C228 is well suited for use in producing polyurethane resins and...view more REAXIS® C228 is a yellowish liquid catalyst used in polyurethane systems. This catalyst is a very active catalyst and is a less toxic analogue to REAXIS® C223 (dibutyltin diacetate). REAXIS® C228 is well suited for use in producing polyurethane resins and crosslinking, silicone condensations and esterifications view less
Troycat™ Cobalt 6 Arxada – Troy Corporation Troycat™ Cobalt 6 is a liquid catalyst soluble in organic media utilized as a catalyst for organic chemical reactions. Request Sample
PLACCEL FA2K Daicel (U.S.A.), Inc. PLACCEL FA2K is macro monomer with an acrylic double bond and a primary hydroxyl group used as the modifying agent for acrylic resins. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catal...view more PLACCEL FA2K is macro monomer with an acrylic double bond and a primary hydroxyl group used as the modifying agent for acrylic resins. Generally tin catalyst is widely used as a polymerization catalyst of polycaprolactonepolyols. However, use of tin catalyst tends to be avoided because of the bad influence to a human health and environment in recent years. Even if we use non-tin catalyst, we succeeded in obtaining polycaprolactonepolyols with quality equivalent to the case which tin catalyst is used. view less
ECAT-353 Designer Molecules ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...view more ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. view less
POLYCAT® SA 5 Evonik Operations GmbH, BL Comfort & Insulation POLYCAT® SA 5 is a gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It is recommended to use in conjunction with DABCO® BA 100 to improve pot life time.
SILCOLEASE CATA 94 B Elkem Silicones SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in po...view more SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in polyaddition reaction only. The release properties of the coating can be modified. view less
SILCOLEASE 7611 Elkem Silicones ​SILCOLEASE 7611 is a kind of tri-component solventless type paper release system:Silcolease 7611 (base polymer)Silcolease crosslinker 321(crosslinker)Silcolease catalyst 91B (catalyst).
CYCAT® 4040 Allnex CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to...view more CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems. view less Request Sample
SILCOLEASE CATA 90 B Elkem Silicones SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALY...view more SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALYST 90 B is used solely in polyaddition reaction systems. view less
CYCAT® 296-9 Allnex CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ran...view more CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked. view less Request Sample
SILCOLEASE CATA 93 B Elkem Silicones SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B i...view more SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B is used solely in polyaddition reaction systems. view less
DABCO® DC 2 Evonik Operations GmbH, BL Comfort & Insulation DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reac...view more DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reactive than DABCO® DC 1. view less
SILCOLEASE PSA 7465F Elkem Silicones ​SILCOLEASE PSA 7465F is part of a 3 components solvent base system for PSA application, the peel value range is 1-3g/25mmSilcolease PSA7465F (Polymer solvent)Silcolease Crosslinker 327 (Crosslinker) Silcolease catalyst 12070 (Catalyst).
SILCOLEASE EMULSION CATA 903 Elkem Silicones SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...view more SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. view less
SILCOLEASE CATA 91 B Elkem Silicones SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is use...view more SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is used in polyaddition reaction only. The release properties of the coating can be modified. view less
REAXIS® C318 Reaxis Inc. REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use ...view more REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use as a catalyst in the production of RTV silicone adhesives and sealants, polyurethane elastomers, polyurethane adhesive and sealants as well as polyurethane coatings. view less
SILCOLEASE PC-370 Elkem Silicones SILCOLEASE PC-370 is a platinum catalyst compound for use with polyaddition solventless release coatings. The catalyst complex is dispersed in a vinyl terminated siloxane fluid for ease of addition.
TIB KAT® 635 TIB Chemicals TIB KAT® 635 is a solid zinc based catalyst which is used for numerous applications. It is suitable as a raw material for wood treatment formulation and as a condensation catalyst for polyester resins.
Epokukdo YD-2209 Kukdo Chemical Co., Ltd. Epokukdo YD-2209 is a liquid type standard epoxy resin derived from Bisphenol-A with a catalyst dispersed in the resin. Due to the catalyst in the resin, YD -2209 can react with Bisphenol-A and so forth.
Imidazole BASF Corporation, Chemical Intermediates Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...view more Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. view less
SILCOLEASE CATA 62 B Elkem Silicones SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applicati...view more SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applications. view less
ECAT-259 Designer Molecules ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...view more ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. view less
DABCO® 1027 Evonik Operations GmbH, BL Comfort & Insulation DABCO® 1027 is a non-acid-blocked delayed action catalyst that is useful in microcellular applications requiring stronger back-end cure. It is a controlled activity catalyst for MEG extended polyester and polyether systems.
DABCO® 1028 Evonik Operations GmbH, BL Comfort & Insulation DABCO® 1028 is a non-acid-blocked delayed action catalyst that is useful in microcellular applications requiring stronger back-end cure. It is a controlled-activity catalyst for 1,4-butanediol extended polyester and polyether systems.
Luna-add K C405-SD DKSH Luna-add K C405-SD is a masterbatch of a catalyst for carboxyl / epoxy reaction in superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, cur...view more Luna-add K C405-SD is a masterbatch of a catalyst for carboxyl / epoxy reaction in superdurable saturated carboxylated polyester resin. Active content: 5%. It is use as catalyst for the formulation of exterior protective thermosetting powder coatings, cured with TGIC or with glycidylesters. view less Request Sample
REAXIS® C716 Reaxis Inc. REAXIS® C716 is an effective liquid catalyst for polyurethane. Made of a bismuth-based catalyst, it can provide a good balance in potlife and cure. REAXIS® C716 is good a non-tin alternative to DBTL for various polyurethane coatings, adhesive/sealants and...view more REAXIS® C716 is an effective liquid catalyst for polyurethane. Made of a bismuth-based catalyst, it can provide a good balance in potlife and cure. REAXIS® C716 is good a non-tin alternative to DBTL for various polyurethane coatings, adhesive/sealants and elastomer systems. view less
Chrome Nitrate Solution, 9.6% Chrome McGean-Rohco, Inc. Chrome Nitrate Solution, 9.6% Chrome is used in pigments, metal finishing, and catalyst applications.
Nyacol® AL25 Nyacol Nano Technology Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and pa...view more Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. view less
Nyacol® AL25-HP Nyacol Nano Technology Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper co...view more Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. view less
REAXIS® C227 Reaxis Inc. REAXIS® C227 is yellowish liquid catalyst used in polyurethane systems. This catalyst exhibits a high activity and improved hydrological stability. REAXIS® C227 is well suited for use in solvent borne polyurethane coatings as well as water borne polyureth...view more REAXIS® C227 is yellowish liquid catalyst used in polyurethane systems. This catalyst exhibits a high activity and improved hydrological stability. REAXIS® C227 is well suited for use in solvent borne polyurethane coatings as well as water borne polyurethane coatings. view less
Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 BASF Corporation, Chemical Intermediates Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less
Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 Univar Solutions Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less Request Sample
REAXIS® C325 Reaxis Inc. REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, pol...view more REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, polyurethane elastomers, adhesive and sealants and coatings. view less
POLYCAT® SA 8 Evonik Operations GmbH, BL Comfort & Insulation POLYCAT® SA 8 is a heat activated co-catalyst with an excellent front-end delay.
SILCOLEASE CATA 340 Elkem Silicones SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high...view more SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high speeds. view less
Chrome Nitrate Solution, 8.5% Chrome McGean-Rohco, Inc. Chrome Nitrate Solution, 8.5% Chrome is used in catalysts, pigments, metal finishing, and catalyst applications.
Luna-add K C404 DKSH Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGI...view more Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGIC or cured with glycidylesters. view less Request Sample
DABCO® T 120 Evonik Operations GmbH, BL Comfort & Insulation DABCO® T 120 is a strong gel catalyst with good hydrolytic stability.
REAXIS® C333E50 Reaxis Inc. REAXIS® C333E50 is a clear liquid catalyst that is well suited for curing a wide selection of solventborne polyurethane-based formulations. It exhibits a high selectivity for the NCO/OH reaction. And is supplied as a 50% active catalyst in ethylene glycol...view more REAXIS® C333E50 is a clear liquid catalyst that is well suited for curing a wide selection of solventborne polyurethane-based formulations. It exhibits a high selectivity for the NCO/OH reaction. And is supplied as a 50% active catalyst in ethylene glycol. REAXIS® C333E50 can be supplied in other diluents. view less
BL-693 Buckman Laboratories, Inc. BL-693 is a delayed action amine catalyst based on ATMEDA, Buckman Laboratories' traditional amine catalyst. BL-693 will provide the same catalytic activity as ATMEDA while allowing the formulator more flexibility in mixing and mold filling times. This...view more BL-693 is a delayed action amine catalyst based on ATMEDA, Buckman Laboratories' traditional amine catalyst. BL-693 will provide the same catalytic activity as ATMEDA while allowing the formulator more flexibility in mixing and mold filling times. This product will consistently reduce friability in foam applications. The product also has the potential to act as a curing catalyst at higher use levels. Buckman recommends testing BL-693 to determine the appropriate use level for each foam system. view less Request Sample
SILCOLEASE CATA 62 A Elkem Silicones SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food conta...view more SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food contact application. view less
Chrome Nitrate Solution, 11.5% Chrome McGean-Rohco, Inc. Chrome Nitrate Solution, 11.5% Chrome is used in pigments, metal finishing, and catalyst applications.
ADDITOL® E 04594 Allnex ADDITOL® E 04594 is a catalyst masterbatch designed for use in hybrid, TGIC or Araldite® PT-910 systems. ADDITOL® E 04594 contains 10% active substance in a special polyester resin carrier. ADDITOL® E 04594 is easily handled and greatly improves the disp...view more ADDITOL® E 04594 is a catalyst masterbatch designed for use in hybrid, TGIC or Araldite® PT-910 systems. ADDITOL® E 04594 contains 10% active substance in a special polyester resin carrier. ADDITOL® E 04594 is easily handled and greatly improves the dispersion of catalyst in powder coatings. view less Request Sample
DABCO® 8154 Evonik Operations GmbH, BL Comfort & Insulation DABCO® 8154 is an acid-blocked delayed action catalyst that is useful in extending pot life.
DABCO® T 12 Evonik Operations GmbH, BL Comfort & Insulation DABCO® T 12 is a dibutyltin dilaurate. Strong gel catalyst. Moderate hydrolytic stability.
ADDITOL® P 964 Allnex ADDITOL® P 964 is a catalyst master batch designed for use in hybrid, TGIC or ARALDITE PT-910 systems. It contains 5% active substance and is designed for indoor or outdoor use. ADDITOL® P 964 is easily handled and greatly improves the dispersion of catal...view more ADDITOL® P 964 is a catalyst master batch designed for use in hybrid, TGIC or ARALDITE PT-910 systems. It contains 5% active substance and is designed for indoor or outdoor use. ADDITOL® P 964 is easily handled and greatly improves the dispersion of catalyst in powder coatings. view less Request Sample
POLYCAT® DBU Evonik Operations GmbH, BL Comfort & Insulation POLYCAT® DBU is a strong gel catalyst that provides snap cure at ambient temperature.
TIB KAT® 318 TIB Chemicals TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. ...view more TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. This product improves pot life and can be used in 1p- and 2p- PU formulations. view less
SETALUX® 17-1746 Allnex SETALUX® 17-1746 is an acrylic polyol designed for use with aliphatic poly-isocyanates in 2 component coatings systems to produce a hard durable coating with very good chemical and abrasion resistance. SETALUX® 17-1746 also possesses excellent gloss, color retention and durability. The addition of a tin catalyst (0.01 - 0.05% based on resin solids) will improve the film properties. Lower catalyst levels promote better chemical resistance and extended pot life. Higher catalyst...view more SETALUX® 17-1746 is an acrylic polyol designed for use with aliphatic poly-isocyanates in 2 component coatings systems to produce a hard durable coating with very good chemical and abrasion resistance. SETALUX® 17-1746 also possesses excellent gloss, color retention and durability. The addition of a tin catalyst (0.01 - 0.05% based on resin solids) will improve the film properties. Lower catalyst levels promote better chemical resistance and extended pot life. Higher catalyst concentrations provide very rapid cure times. view less Request Sample
DAPRO® DF 7007 Elementis DAPRO® DF 7007 is a chelating catalyst to replace cobalt based dryers in waterborne coatings. Request Sample
SILCOLEASE EMULSION CATA 70827 A Elkem Silicones SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOL...view more SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOLEASE EMULSION 70840. It only catalyses polycondensation type reactions. view less
REAXIS® C333W50 Reaxis Inc. REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied a...view more REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied as a 50% active catalyst in water and can be supplied in other diluents. view less
CYCAT® 4045 Allnex CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluen...view more CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. view less Request Sample
ADDITOL® P 963 Allnex ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersio...view more ADDITOL® P 963 is a catalyst masterbatch to be used in hybrid, TGIC or ARALDITE® PT-910 systems. ADDITOL® P 963 contains 5 % active substance and has been designed for indoor and outdoor use. ADDITOL® P 963 is easily handled and greatly improves dispersion of the catalyst in powder coating formulations. view less Request Sample
DABCO® NE 300 Evonik Operations GmbH, BL Comfort & Insulation DABCO® NE 300 is a highly efficient low emissive blow catalyst suitable for replacement of BDMAEE catalysts.
REAXIS® C726 Reaxis Inc. REAXIS® C726 is a slightly yellow liquid bismuth-based catalyst used for the catalysis of polyurethane systems.
N,N-Dimethylethanol-amine Lupragen® N 101 BASF Corporation, Chemical Intermediates N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints...view more N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints. N,N-Dimethylethanolamine is also used as neutralization agent in paints based on water-borne polyesters, alkyds, acrylic resins and polyurethanes. view less
N,N-Dimethylethanol-amine Lupragen® N 101 Univar Solutions N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints...view more N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints. N,N-Dimethylethanolamine is also used as neutralization agent in paints based on water-borne polyesters, alkyds, acrylic resins and polyurethanes. view less Request Sample
SILCOLEASE EMULSION CATA 911 Elkem Silicones SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...view more SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. view less
N,N-DI-(2-hydroxyethyl) aniline BASF Corporation, Chemical Intermediates N,N-DI-(2-hydroxyethyl) aniline is an accelerator for radical initiated polymerization of unsaturated polyesters. Catalyst for epoxy reactions.
REAXIS® C723 Reaxis Inc. REAXIS® C723 is a slightly yellow liquid bismuth-based catalyst used for the catalysis of polyurethane systems.
Arobras™ 2424 ASK Chemicals Arobras™ 2424 is a catalyst for polyurethane systems. It was developed for use as an accelerator of reaction.
SILCOLEASE EMULSION 912 Elkem Silicones SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...view more SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. view less
SILCOLEASE EMULSION 925 Elkem Silicones SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...view more SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. view less
Triphenylphosphine BASF Corporation, Chemical Intermediates Triphenylphosphine is a catalyst for epoxy reactions. Triphenylphosphine is used in resin production, e.g. for epoxy modification used in CED-coatings.
SILCOLEASE EMULSION 908 Elkem Silicones SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...view more SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. view less
KOSMOS® T 100 Evonik Operations GmbH, BL Comfort & Insulation KOSMOS® T 100 is the strongest gel catalyst particularly suitable for fast curing applications such as spray coatings and RIM.
DABCO® T 131 Evonik Operations GmbH, BL Comfort & Insulation DABCO® T 131 is a strong gel catalyst with good hydrolytic stability which provides a more delayed action than DBTDL.
REAXIS® C317 Reaxis Inc. REAXIS® C317 is a yellowish liquid catalyst that can be used in various applications. The catalyst is manufactured from synthetic raw materials and provides excellent temperature and color stability. REAXIS® C317 is well suited for use in esterification a...view more REAXIS® C317 is a yellowish liquid catalyst that can be used in various applications. The catalyst is manufactured from synthetic raw materials and provides excellent temperature and color stability. REAXIS® C317 is well suited for use in esterification and transesterification reactions, isocyanate/alcohol reactions for urethane coatings as well as silicone condensation reactions, especially with RTV silicones. view less
N,N-Dimethylbenzyl-amine Lupragen® N 103 BASF Corporation, Chemical Intermediates N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modifie...view more N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modified epoxy resins are used for cationic electro deposition coatings. N,N-Dimethylbenzyl-amine is used as catalyst for the production of polyurethanes (e.g. for plastic parts). view less
N,N-Dimethylbenzyl-amine Lupragen® N 103 Univar Solutions N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modifie...view more N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modified epoxy resins are used for cationic electro deposition coatings. N,N-Dimethylbenzyl-amine is used as catalyst for the production of polyurethanes (e.g. for plastic parts). view less Request Sample
NACURE® 155 King Industries, Inc. NACURE® 155 is a hydrophobic sulfonic acid catalyst featuring excellent water, salt, and detergent resistance, superior adhesion, and low conductivity. It is primarily used as a catalyst in the curing of hydroxy, carboxy, and amide functional polymers wit...view more NACURE® 155 is a hydrophobic sulfonic acid catalyst featuring excellent water, salt, and detergent resistance, superior adhesion, and low conductivity. It is primarily used as a catalyst in the curing of hydroxy, carboxy, and amide functional polymers with melamine and urea-formaldehyde crosslinking agents. Common applications include waterborne can coatings, automotive primers, printing inks, electrocoatings, coil coatings, and appliance finishes. view less
DABCO® NE 1070 Evonik Operations GmbH, BL Comfort & Insulation DABCO® NE 1070 is a low emission gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG.
Titanate Coupling Agent FD-NPT Zhejiang Feidian Chemical Co., Ltd. FD-NPT is a pale yellow oil liquid. It is mainly used to manufacture the binder for metal, rubber, and plastic. It is also used as a catalyst in transesterification, esterification reaction, condensation reaction, and as raw material in pharmaceutical Ind...view more FD-NPT is a pale yellow oil liquid. It is mainly used to manufacture the binder for metal, rubber, and plastic. It is also used as a catalyst in transesterification, esterification reaction, condensation reaction, and as raw material in pharmaceutical Industry. FD-NPT is also used as Ziegler catalyst that has high stereoselectivity in polymerization reaction of polyolefins. view less
PATOX Manganese Octoate 6% WB Patcham USA PATOX Manganese Octoate 6% WB is a clear reddish brown liquid. It can be used as a drying catalyst.
1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 BASF Corporation, Chemical Intermediates 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less
1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 Univar Solutions 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less Request Sample
Epokukdo YD-014ER Kukdo Chemical Co., Ltd. Epokukdo YD-014ER epoxy resin could be employed for esterification for the intended purpose. In this case, special catalyst should be used with particular chemical reaction. Therefore, Epokukdo YD-014ER is the product which is dispersed into 3-4 type epox...view more Epokukdo YD-014ER epoxy resin could be employed for esterification for the intended purpose. In this case, special catalyst should be used with particular chemical reaction. Therefore, Epokukdo YD-014ER is the product which is dispersed into 3-4 type epoxy resin by catalyst needed for esterification. This esterified product provides good chemical resistance and excellent mechanical properties as same as conventional epoxy resin. view less
N,N-Dimethylcyclohexyl-amine Lupragen® N 100 BASF Corporation, Chemical Intermediates N,N-Dimethylcyclohexyl-amine Lupragen® N 100 is a catalyst for isocyanate reactions. Coatings technology for polyurethane resin production.
N,N-Dimethylcyclohexyl-amine Lupragen® N 100 Univar Solutions N,N-Dimethylcyclohexyl-amine Lupragen® N 100 is a catalyst for isocyanate reactions. Coatings technology for polyurethane resin production. Request Sample
Epokukdo YD-017R Kukdo Chemical Co., Ltd. Epokukdo YD-017R epoxy resin could be employed for esterification for the intended purpose. In this case, special catalyst should be used with particular chemical reaction. Therefore, Epokukdo YD-017R is the product which is dispersed into YD-017 by catal...view more Epokukdo YD-017R epoxy resin could be employed for esterification for the intended purpose. In this case, special catalyst should be used with particular chemical reaction. Therefore, Epokukdo YD-017R is the product which is dispersed into YD-017 by catalyst needed for esterificaion. This esterificated product provides good chemical resistance and excellent mechanical properties as same as conventional epoxy resin. view less
Chromic Acid Qingdao Sun Chemical Corporation Limited Chromic Acid is widely used in chromium plating, wood preservation, medicine, catalyst, pigment, oxidizing agent, glass coloring and mordant of textile, as well as in material producing oxidative catalyst. This product is supplied in dark red flakes, has ...view more Chromic Acid is widely used in chromium plating, wood preservation, medicine, catalyst, pigment, oxidizing agent, glass coloring and mordant of textile, as well as in material producing oxidative catalyst. This product is supplied in dark red flakes, has a melting point of 197°C(starts to decompose), and has a specific gravity of 2.70g/cm^3. It has strong oxidation, deliquescer readily in air, and highly soluble in water. view less
SILCOLEASE POLY 7430 Elkem Silicones SILCOLEASE POLY 7430 is part of a 2 component solvent system for Paper Release applications based on: Silcolease 7430 (Polymer Solution) Silcolease 93B (Catalyst).
REAXIS® C311X Reaxis Inc. REAXIS® C311X is a light yellow liquid catalyst in xylene. The main use is for the catalysis of silicone and urethane CASE products.
Hycat™ SM-3 Dimension Technology Chemical Systems, Inc. Hycat™ SM-3 is a liquid epoxy catalyst. It's performance is similar to our flagship anhydride catalyst, Hycat™ 3100S, but was specially formulated to perform better at higher cure temperatures. It provides a more even distribution of the heat evolved from...view more Hycat™ SM-3 is a liquid epoxy catalyst. It's performance is similar to our flagship anhydride catalyst, Hycat™ 3100S, but was specially formulated to perform better at higher cure temperatures. It provides a more even distribution of the heat evolved from a polymer reaction leading to the production of consistently uniform cures that are free from cracks and voids. It is recommended for use in epoxy/anhydride formulations. view less
DABCO® DMDEE Evonik Operations GmbH, BL Comfort & Insulation DABCO® DMDEE is an amine catalyst that is isocyanate stable. It is used in one component moisture cured applications in CASE.
Troycat™ Cobalt 12 Arxada – Troy Corporation Troycat™ Cobalt 12 is liquid soluble in organic media. Troycat™ Cobalt 12 is utilized as a catalyst for organic chemical reactions. Request Sample
Drocure™ 5130 D.R. Coats Ink & Resins Pvt. Ltd. Drocure™ 5130 is a versatile Lewis based catalyst for curing of Epoxy Resins. It is a technical grade of tris-(dimethylaminomethyl) phenol.
DABCO® MB 20 Evonik Operations GmbH, BL Comfort & Insulation DABCO® MB 20 is a bismuth-based gel catalyst developed for a wide range of urethane formulations. It does not contain 2-EHA, DBT or TBT.
POLYCAT® SA 2 LE Evonik Operations GmbH, BL Comfort & Insulation POLYCAT® SA 2 LE is a low emission heat activated catalyst that exhibits a front end delay with rapid back end-cure.