| 7151 | GIMEL Technical Materials | 7151 is a modified diacrylate ester of bisphenol A epoxy oligomer used in UV-curable adhesives, nail gels, coatings, and inks. It shows a high gloss, fast curing response, and excellent toughness and tensile strength. | Request Sample |
| Speedcure PBZ | Sartomer Americas | SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable...view more SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| SUO-1811N | DKSH | SUO-1811N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1811N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1811N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1811N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1811N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1831N | DKSH | SUO-1831N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1831N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1831N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1831N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1831N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1841N | DKSH | SUO-1841N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1841N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1841N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1841N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1841N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1881N | DKSH | SUO-1881N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1881N is combined with hydroxyl bearing resins to formulate coatings which...view more SUO-1881N is isocyanate bearing urethane acrylate UV and electron beam curable, two component polyurethane coatings, adhesion promoter in UV and electron beam curable coatings. SUO-1881N is combined with hydroxyl bearing resins to formulate coatings which can be cured by the dual cure process (UV induced polymerization and NCO/OH reaction). The product is also used in pure UV curing coatings to improve their adhesion on critical substrates such as plastic, metal or exotic woods. Coatings containing SUO-1881N can be applied by spray, curtain coating or roller coating. view less | Request Sample |
| SUO-1611H | DKSH | SUO-1611H is a OH containing urethane acrylate oligomer product. It is designed for dual curing process such as UV cure and urethane reaction with isocyanate (NCO). And this product provides good curing response when exposed to ultraviolet light (UV). Its...view more SUO-1611H is a OH containing urethane acrylate oligomer product. It is designed for dual curing process such as UV cure and urethane reaction with isocyanate (NCO). And this product provides good curing response when exposed to ultraviolet light (UV). Its chemical composition is aliphatic urethane acrylate / dual functionality (mono acrylate, mono hydroxy group). view less | Request Sample |
| SUO-1621H | DKSH | SUO-1621H is a OH containing urethane acrylate oligomer product. It is designed for dual curing process such as UV cure and urethane reaction with isocyanate (NCO). And this product provides good curing response when exposed to ultraviolet light (UV). Its...view more SUO-1621H is a OH containing urethane acrylate oligomer product. It is designed for dual curing process such as UV cure and urethane reaction with isocyanate (NCO). And this product provides good curing response when exposed to ultraviolet light (UV). Its chemical composition is aliphatic urethane acrylate / dual functionality (mono acrylate, mono hydroxy group). view less | Request Sample |
| Relca® UV-628 | Stahl Polymers | Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good...view more Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good scratch resistance properties, and is tack free before UV curing. This product is used in applications that need to be dried prior to EB/UV curing, and requires the addition of a photoinitiator to ensure proper curing. view less | |
| Speedcure BMS | Sartomer Americas | SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable...view more SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. view less | |
| Ancamide® 2050 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2050 Curing Agent is a special polyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings. This product is a clear, amber liquid. | Request Sample |
| Luna-cat 7318 | DKSH | Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe,...view more Luna-cat 7318 is a new anti-yellowing, low temperature curing accelerator, designed for powder coatings based on PES/TGIC and PES/Hybrid. The product is a catalyst to reduce curing temperatures or shorten curing times. This product is available in Europe, Asia and North America. view less | Request Sample |
| CN1002 | Sartomer Americas | CN1002 is an oligomer that combines abrasion resistance and flexibility with hardness and fast cure response. CN1002 is specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of b...view more CN1002 is an oligomer that combines abrasion resistance and flexibility with hardness and fast cure response. CN1002 is specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of both inks and hardcoat formulations. The suggested level of addition is 15-20% of the total formulation. view less | |
| EBECRYL® LED 04 | Allnex | EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by p...view more EBECRYL® LED 04 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 04 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 04 exhibit a low odor after UV or EB curing. Due to its hydrophobic nature EBECRYL® LED 04 can also be used in offset inks applications as a replacement of aminobenzoate synergists. view less | Request Sample |
| ACCELERATOR 399 | Huntsman Performance Products | Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy system...view more Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy systems. view less | |
| EBECRYL® LED 05 | Allnex | EBECRYL® LED 05 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 05 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by...view more EBECRYL® LED 05 is an acrylated polyamine that can be added as a co-resin to UV curable formulations. EBECRYL® LED 05 – when combined with an appropriate photo initiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED 05 exhibit a low odor after UV or EB curing. Due to its unique structure EBECRYL® LED 05 based flexo inks have improved ink flow stability due to better compatibility with organic pigments. view less | Request Sample |
| Speedcure XKm | Sartomer Americas | SpeedCure XKm is a hybrid Norrish Type I / Norrish Type II photoinitiator from the phosphine oxide family, with absorption maxima at 247 and 364 nm. SpeedCure XKm provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable...view more SpeedCure XKm is a hybrid Norrish Type I / Norrish Type II photoinitiator from the phosphine oxide family, with absorption maxima at 247 and 364 nm. SpeedCure XKm provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. view less | |
| Speedcure 73 | Sartomer Americas | SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV-curable formulations. | |
| CN2261 | Sartomer Americas | CN2261 is a polyester acrylate oligomer. CN2261 was developed for UV curable wood and floor coating applications, where hardness and abrasion resistance are required. CN2261 demonstrates excellent cure rates. | |
| 2115A | GIMEL Technical Materials | 2115A is a fifteen-functional urethane acrylate used in plastic coatings and vacuum metallization top coatings. It shows high hardness, a fast curing response that promotes surface curing, and excellent abrasion and scratch resistance. | Request Sample |
| Epoxy Hardener G-91 | Estron Chemical, Inc. | Epoxy Hardener G-91 is an imidazole type of curing agent for epoxy-based powder coatings. Coatings cured with Epoxy Hardener G-91 show excellent chemical resistance, mechanical properties, and the capability for low temperature cure. | |
| GENOMER* 5695 | Rahn USA Corp. | GENOMER* 5695 is a newly introduced product which brings value to LED curing. Formulations containing GENOMER* 5695 cure rapidly with UV/LED. The product brings improved reactivity and surface cure in UV applications. GENOMER* 5695 features good flexibili...view more GENOMER* 5695 is a newly introduced product which brings value to LED curing. Formulations containing GENOMER* 5695 cure rapidly with UV/LED. The product brings improved reactivity and surface cure in UV applications. GENOMER* 5695 features good flexibility, low yellowing and low odor and reduces oxygen inhibition. view less | Request Sample |
| SEA-F130H | DKSH | SEA-F130H is bisphenol F based acrylate epoxy oligomer. It is applicable to uv dual hybrid curable systems and can be adopted the method of mixing the two kinds of oligomers and made the interpenetrating polymer network (IPN) by dual curing. | Request Sample |
| SEA-F150H | DKSH | SEA-F150H is bisphenol F based acrylate epoxy oligomer. It is applicable to uv dual hybrid curable systems and can be adopted the method of mixing the two kinds of oligomers and made the interpenetrating polymer network (IPN) by dual curing. | Request Sample |
| SEA-F170H | DKSH | SEA-F170H is bisphenol F based acrylate epoxy oligomer. It is applicable to uv dual hybrid curable systems and can be adopted the method of mixing the two kinds of oligomers and made the interpenetrating polymer network (IPN) by dual curing. | Request Sample |
| Docure KH-500 | Kukdo Chemical Co., Ltd. | Docure KH-500 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-500 shows good physical properties and chemical resistance. It is well suited for use in the production of coatings that are curable at low ...view more Docure KH-500 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-500 shows good physical properties and chemical resistance. It is well suited for use in the production of coatings that are curable at low temperatures. view less | |
| UCECOAT® 7717 | Allnex | UCECOAT® 7717 is a solvent free, energy curable polyurethane dispersion, with low tack after drying and before UV/EB curing. The special combination of low tack, and not physically drying before cure, makes UCECOAT® 7717 the ideal product for high “Anfeue...view more UCECOAT® 7717 is a solvent free, energy curable polyurethane dispersion, with low tack after drying and before UV/EB curing. The special combination of low tack, and not physically drying before cure, makes UCECOAT® 7717 the ideal product for high “Anfeuerung” primers and combined applications with stains. UCECOAT® 7717 can be applied by spray or roller coater. view less | Request Sample |
| SR9075 | Sartomer Americas | SR9075 is an alkoxylated lauryl acrylate monomer. SR9075 demonstrates good pigment wetting, flexibility, and cure speed in radiation curable ink, coating, and adhesive applications. SR9075 is particularly suited to plastic substrates. | |
| Norox® MEKP-9 RED | UNITED INITIATORS GMBH & CO KG | Norox® MEKP-9 RED, in the form of a red liquid, is a general-purpose cure initiator for the room temperature cure of polyester resins. It gives consistent room temperature performance as a curing agent for both gel coats and resins. | |
| CN2261LV | Sartomer Americas | CN2261LV is a polyester acrylate oligomer. CN2261LV was developed for UV curable wood and floor coating applications, where hardness and abrasion resistance are required. CN2261LV demonstrates excellent cure rates and impact strength. | |
| EFKA® PX 4733 | BASF Formulation Additives | EFKA® PX 4733 is an advanced polymeric dispersant with a core-shell structure. It offers the following benefits: 100% active, liquid dispersant, high pigment loading at low mill base viscosity, and particularly effective in UV-curable and in mild-solvent ...view more EFKA® PX 4733 is an advanced polymeric dispersant with a core-shell structure. It offers the following benefits: 100% active, liquid dispersant, high pigment loading at low mill base viscosity, and particularly effective in UV-curable and in mild-solvent ink-jet systems. This product is suitable for use in UV-curable ink system including UV-curable flexographic, litho and screen inks. view less | |
| Speedcure 938 | Sartomer Americas | SpeedCure 938 is cationic photoinitiator of the iodonium hexafluorophosphate family, with absorption maximum at 241 nm. SpeedCure 938 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED cur...view more SpeedCure 938 is cationic photoinitiator of the iodonium hexafluorophosphate family, with absorption maximum at 241 nm. SpeedCure 938 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones. view less | |
| DOUBLEMER® 5212 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 5212 is a type of UV curing oligomer. It is characterized by non-yellowing, high curing speed, low viscosity, good toughness and flexibility, and good hydrolysis resistance. Formulated UV/EB curable products containing DOUBLEMER® 5212 may be ap...view more DOUBLEMER® 5212 is a type of UV curing oligomer. It is characterized by non-yellowing, high curing speed, low viscosity, good toughness and flexibility, and good hydrolysis resistance. Formulated UV/EB curable products containing DOUBLEMER® 5212 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommended for use in ink coatings and varnishes. view less | |
| Speedcure 937 | Sartomer Americas | SpeedCure 937 is cationic photoinitiator of the iodonium hexafluoroantimonate family, with absorption maximum at 230 nm. SpeedCure 937 provides high reactivity and high solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and L...view more SpeedCure 937 is cationic photoinitiator of the iodonium hexafluoroantimonate family, with absorption maximum at 230 nm. SpeedCure 937 provides high reactivity and high solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones. view less | |
| D.E.H.™ 530E32 | Univar Solutions | D.E.H.™ 530E32 is a cycloaliphatic amine cure agent for epoxy resin systems with low color, blush-free, especially designed for ambient and low temperature cure applications. | Request Sample |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...view more CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| GABEPRO® GPM-800 | Gabriel Performance Products | GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...view more GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| GABEPRO® GPM-8003 | Gabriel Performance Products | GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...view more GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. view less | |
| EBECRYL® 7201 | Allnex | EBECRYL® 7201 is an acrylated amine primarily used as a hydrogen donor or photoactivator in ultraviolet (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7201 has an accelerating ...view more EBECRYL® 7201 is an acrylated amine primarily used as a hydrogen donor or photoactivator in ultraviolet (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7201 has an accelerating effect on the UV cure speed. view less | Request Sample |
| Aldirez A | Incorez Ltd. | Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and...view more Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and is suitable for use with both aromatic and aliphatic prepolymers. Aldirez A inhibits CO2 generation and it allows the formulator to accelerate the cure of PU primers with a workable application potlife. view less | |
| EBECRYL® 4510 | Allnex | EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It...view more EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV curing coatings to improve the adhesion on substrates as plastic, metal and exotic woods. view less | Request Sample |
| ANCAMINE® 2489 CURING AGENT | Evonik Operations GmbH, BL Crosslinkers | Modified cycloaliphatic amine offering low color and low viscosity. Allows higher filler loading and/or a reduced need for diluents. Provides very rapid cure and high gloss and blush resistance. | Request Sample |
| Epokukdo KDN-255 | Kukdo Chemical Co., Ltd. | Epokukdo KDN-255 is low temperature curable epoxy resin specially designed for providing the high reactivity on resin structure itself. It provides the effects on reducing curing time, keeping suitable pot life and reducing drying time for various applica...view more Epokukdo KDN-255 is low temperature curable epoxy resin specially designed for providing the high reactivity on resin structure itself. It provides the effects on reducing curing time, keeping suitable pot life and reducing drying time for various application in coating, adhesive, civil and construction. Additionally, in baking application, it could bring stable viscosity at low temperature(generally 40oC-80oC) but it will act as a fast curing reaction at required curing temperature(generally 80oC-200oC). This product also provides better chemical resistance, better adhesion on film surface comparing to BPA type. view less | |
| Epokukdo KDN-253 | Kukdo Chemical Co., Ltd. | Epokukdo KDN-253 is low temperature curable epoxy resin specially designed for providing the high reactivity on resin structure itself. It provides the effects on reducing curing time, keeping suitable pot life and reducing drying time for various applica...view more Epokukdo KDN-253 is low temperature curable epoxy resin specially designed for providing the high reactivity on resin structure itself. It provides the effects on reducing curing time, keeping suitable pot life and reducing drying time for various application in coating, adhesive, civil and construction. Additionally, in baking application, it could bring stable viscosity at low temperature(generally 40oC-80oC) but it will act as a fast curing reaction at required curing temperature(generally 80oC-200oC). This product also provides better chemical resistance, better adhesion on film surface comparing to BPA type. view less | |
| GENOMER* 3430 | Rahn USA Corp. | GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured w...view more GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less | Request Sample |
| GENOMER* 4514 | Rahn USA Corp. | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...view more GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less | Request Sample |
| TMPEOTA | Allnex | TMPEOTA (Trimethylolpropane ethoxy triacrylate) is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while ma...view more TMPEOTA (Trimethylolpropane ethoxy triacrylate) is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, TMPEOTA exhibits the highest reactivity and the greatest viscosity reduction of oligomers. view less | Request Sample |
| Ancamide® 2652 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2652 Curing Agent is a specialpolyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings specifically developed to provide long overcoatability with epoxy and alternative resin technology. | Request Sample |
| REAXIS® C321 | Reaxis Inc. | REAXIS® C321is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C321 is well suited for more of a delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C322 | Reaxis Inc. | REAXIS® C322 is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C322 is well suited for a more delayed cure time when compared to organotin carboxylates. | |
| SpeedCure 2022 | Sartomer Americas | SpeedCure 2022 is a liquid formulated blend of photoinitiators, with absorption maxima at 243 and 280 nm. SpeedCure 2022 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations. | |
| GENOMER* 5161 | Rahn USA Corp. | GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use ...view more GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use in the following applications: overprint varnishes; coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. view less | Request Sample |
| A-Cat 0040 | FTC Korea Co.,Ltd | A-Cat 0040 has excellent stability in solvent soluble and water-based thermosetting system, low temperature cure, and a fast cure time. It is used in general industries coatings. | Request Sample |
| Norox® MEKP-9H | UNITED INITIATORS GMBH & CO KG | Norox® MEKP-9H, in the form of a liquid, is a general-purpose cure initiator for the room temperature cure of polyester resins. It also features a reduced level of hydrogen peroxide and is particularly useful in critical gel coat applications. | |
| Doublecure® 1819DW | Double Bond Chemical Ind., Co., Ltd. | Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a dispersion of Bis-Acyl-Phosphine Oxide in water. This white to slightly yellow liquid can be used in combinations with other photoinitiators such as Doublecure® 173. It can be used in UV curable...view more Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a dispersion of Bis-Acyl-Phosphine Oxide in water. This white to slightly yellow liquid can be used in combinations with other photoinitiators such as Doublecure® 173. It can be used in UV curable formulations for clear or pigmented coatings on wood, metal, plastic, paper as well as for printing inks. In addition, it allows curing of thick sections due to the outstanding absorption. view less | |
| Speedcure BKL | Sartomer Americas | SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253.nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations. | |
| SpeedCure 4265 | Sartomer Americas | SpeedCure 4265 is a liquid formulated blend of photoinitiators, with absorption maxima at 240, 273 and 380 nm. SpeedCure 4265 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations. | |
| PHENODUR® PR 612/80B | Allnex | PHENODUR® PR 612/80B is a curable phenolic resin. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varni...view more PHENODUR® PR 612/80B is a curable phenolic resin. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varnishes. view less | Request Sample |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| Ancamide® 2891 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent b...view more Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent borne epoxy coatings, where high barrier properties and fast return to service are essential. Ancamide® 2891 Curing Agent is alkyl phenol and salicylic acid free while offering excellent Corrosion and Chemical Resistance along with good appearance. The product can be used over a broad temperature range and provides overnight cure at temperatures down to 5°C. view less | Request Sample |
| SUO-7301N | DKSH | SUO-7301N is an isocyanate bearing urethane acrylate oligomer is designed for dual curing process such as UV cure and urethane reaction with hydroxy group (OH). NCO functional group contain aliphatic urethane acrylate. Its chemical composition is dual fun...view more SUO-7301N is an isocyanate bearing urethane acrylate oligomer is designed for dual curing process such as UV cure and urethane reaction with hydroxy group (OH). NCO functional group contain aliphatic urethane acrylate. Its chemical composition is dual functionality (di-acrylate, isocyanate group). view less | Request Sample |
| EPOTUF® 37-650 | Polynt Composites | EPOTUF® 37-650 is a 100% solids modified polyamide curing agent for curing EPOTUF® epoxy resins. | |
| REAXIS® C416 | Reaxis Inc. | REAXIS® C416 is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C416 provides for more of a delayed action cure and enhanced hydroltic stability compared to organotin carboxylates. | |
| REAXIS® C418 | Reaxis Inc. | REAXIS® C418 is a liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C418 is well suited for a delayed cure reaction and enhanced hydrological stability when compared to organotin carboxylates. | |
| UVECOAT® 9146 | Allnex | UVECOAT® 9146 is an aliphatic unsaturated acrylic urethane polymer for use as a crosslinker with UVECOAT® resins in UV curable powder coatings. Use of UVECOAT® 9146 in a UV curable powder coating will enhance reactivity and improve surface hardness. | Request Sample |
| EBECRYL® 4250 | Allnex | EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymeriza...view more EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation of moisture-curing one-component polyurethane coatings, especially for one-component adhesion primers. view less | Request Sample |
| Speedcure 84 | Sartomer Americas | SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| SpeedCure 2100 | Sartomer Americas | SpeedCure 2100 is a liquid formulated blend of photoinitiators, with absorption maxima at 228, 272 and 368 nm. SpeedCure 2100 provides excellent depth curing for a broad range of applications when used at 0.5-5 wt% in UV curable formulations. | |
| SR9087 | Sartomer Americas | SR9087 is an alkoxylated phenol acrylate monomer. This product demonstrates good pigment wetting and surface cure speed in radiation curable ink, plastic coatings, and laminating and pressure adhesive applications. SR9087 also imparts good hardness, with...view more SR9087 is an alkoxylated phenol acrylate monomer. This product demonstrates good pigment wetting and surface cure speed in radiation curable ink, plastic coatings, and laminating and pressure adhesive applications. SR9087 also imparts good hardness, without sacrificing flexibility. view less | |
| EBECRYL® 85 | Allnex | EBECRYL® 85 is a low viscosity amine modified polyether acrylate that provides high reactivity in low extractable, low odor energy curable coatings and inks. Coatings and inks based on EBECRYL® 85 exhibit a low odor after UV or EB curing. | Request Sample |
| Norox® MEKP-9H FRED | UNITED INITIATORS GMBH & CO KG | Norox® MEKP-9H FRED, in the form of a red liquid, is a general-purpose cure initiator for the room temperature cure of polyester resins. It also features a reduced level of hydrogen peroxide and is particularly useful in critical gel coat applications. | |
| Norox® MEKP-9H RED | UNITED INITIATORS GMBH & CO KG | Norox® MEKP-9H RED, in the form of a red liquid, is a general-purpose cure initiator for the room temperature cure of polyester resins. It also features a reduced level of hydrogen peroxide and is particularly useful in critical gel coat applications. | |
| PHENODUR® PR 520/65B | Allnex | PHENODUR® PR 520 is a curable, unplasticized phenolic resin. Type PHENODUR® PR 516, higher solid (less VOC) and less migration, curing speed slightly lower vs. original type PHENODUR® PR 516. Intended to be used for BADGE- and BPA-NI application. | Request Sample |
| REAXIS® C319 | Reaxis Inc. | REAXIS® C319 is a yellowish liquid catalyst that is used in the synthesis and curing of polyurethanes. REAXIS® C319 is well suited for more of a delayed cure time when compared to organotin carboxylates. | |
| PHENODUR® PR 616/65B | Allnex | PHENODUR® PR 616/65B is a heat curable BPA NI phenolic resin. It is used in heat-curable phenolic with epoxide or polyester resin combinations, high-adhesion, chemically resistant protective coatings for interior or exterior can coatings and drum linings. | Request Sample |
| LAROMER® PR 9013 | BASF Dispersions & Resins | LAROMER PR 9013 is an unsaturated modified dispersion oligomer used to formulate energy curable pigment concentrates and energy curable offset, flexographic, or silk-screen printing inks. Inks based on LAROMER PR 9013 are characterized by an excellent yie...view more LAROMER PR 9013 is an unsaturated modified dispersion oligomer used to formulate energy curable pigment concentrates and energy curable offset, flexographic, or silk-screen printing inks. Inks based on LAROMER PR 9013 are characterized by an excellent yield value even at high pigmentation levels, high gloss, excellent run-ability, little moisture expansion; they cure to produce low odor films. LAROMER PR 9013 can also be used to formulate coatings for paper, plastic films, metals, wood, and wood products. In energy curable coatings for wood or wood products, it reduces absorption into the substrate. Films show little shrinkage and good wetting. view less | |
| Speedcure MBF | Sartomer Americas | SpeedCure MBF is a liquid Norrish Type II photoinitiator of the benzoylformate family, with an absorption maximum at 244_nm. SpeedCure MBF provides very low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| SUO-2126N | DKSH | SUO-2126N is an isocyanate bearing urethane acrylate oligomer product. It is designed for dual curing process such as UV cure and urethane reaction with hydroxy group (OH). NCO functional group contain aliphatic urethane acrylate. Its chemical composition...view more SUO-2126N is an isocyanate bearing urethane acrylate oligomer product. It is designed for dual curing process such as UV cure and urethane reaction with hydroxy group (OH). NCO functional group contain aliphatic urethane acrylate. Its chemical composition is dual functionality (mono acrylate, isocyanate group). view less | Request Sample |
| Speedcure MBB | Sartomer Americas | SpeedCure MBB is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 246.nm. SpeedCure MBB provides surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. | |
| VEEA™ | NIPPON SHOKUBAI CO., LTD. | VEEA™ by Nippon Shokubai is 2-(2-Vinyloxyethoxy)ethyl acrylate monomer. It is unique monomer having radical curable acryloyl group and cationic curable vinyl ether group in the same molecule. It is not inhibited by oxygen, moisture and bases. This hypoall...view more VEEA™ by Nippon Shokubai is 2-(2-Vinyloxyethoxy)ethyl acrylate monomer. It is unique monomer having radical curable acryloyl group and cationic curable vinyl ether group in the same molecule. It is not inhibited by oxygen, moisture and bases. This hypoallergenic monomer shows excellent UV curability and can be cured by EB (electron beam) curing. Its excellent viscosity and dilutability make the ink composition solvent-free and is rapidly curable in thin film. Provides adhesion, improved ink functionality and enhanced hardness. VEEA™ is recommended for digital inks, lithographic & offset inks, wood & furniture coatings. It is registered with TSCA, DSL, REACH, EINECS, IECEC, NZloC and TCSI. view less | Request Sample |
| UCECOAT® 7655 | Allnex | UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. Developed for high end wooden furniture top coats, both transparent and pigmented, it can be used for other applications and substrate...view more UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. Developed for high end wooden furniture top coats, both transparent and pigmented, it can be used for other applications and substrates. view less | Request Sample |
| Speedcure 2959 | Sartomer Americas | SpeedCure 2959 is a water dispersible Norrish Type I photoinitiator from the hydroxyacetophenone family, with absorption maxima at 219 and 275 nm. SpeedCure 2959 provides low yellowing and surface cure when used at 0.5-5Iwt% in UV curable formulations. | |
| Speedcure BDMB | Sartomer Americas | SpeedCure BDMB is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximumat 321 nm. SpeedCure BDMB provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. | |
| SEA-Z250 | DKSH | SEA-Z250 is a di-functional bisphenol Z epoxy acrylate oligomer. This product is characterized by its fast cure response, excellent adhesion, dimensional stability, heat resistance, chemical and mechanical properties SEA-Z250 provides fast cure response w...view more SEA-Z250 is a di-functional bisphenol Z epoxy acrylate oligomer. This product is characterized by its fast cure response, excellent adhesion, dimensional stability, heat resistance, chemical and mechanical properties SEA-Z250 provides fast cure response when exposed to ultraviolet light (UV). view less | Request Sample |
| GENORAD* 23 | Rahn USA Corp. | GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV c...view more GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations. view less | Request Sample |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| SEA-V236M50 | DKSH | SEA-V236M50 is a phenol novolac epoxy acrylate oligomer. This product is characterized by its fast cure response, adhesive strength and heat and chemical resistance. SEA-V236M50 provides fast cure response when exposed to ultraviolet light (UV). Phenol no...view more SEA-V236M50 is a phenol novolac epoxy acrylate oligomer. This product is characterized by its fast cure response, adhesive strength and heat and chemical resistance. SEA-V236M50 provides fast cure response when exposed to ultraviolet light (UV). Phenol novolac Epoxy Acrylate / TMPTA 50%. view less | Request Sample |
| CN2262 | Sartomer Americas | CN2262 is a polyester acrylate oligomer with a Primary Irritation Index (PII) of zero. CN2262 was developed for sprayable UV curable wood coatings applications where hardness and abrasion resistance are required. CN2262 demonstrates excellent cure rates a...view more CN2262 is a polyester acrylate oligomer with a Primary Irritation Index (PII) of zero. CN2262 was developed for sprayable UV curable wood coatings applications where hardness and abrasion resistance are required. CN2262 demonstrates excellent cure rates and intra-coat adhesion. view less | |
| Speedcure 97 | Sartomer Americas | SpeedCure 97 is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximum at 306 nm. SpeedCure 97 provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| EBECRYL® 160 | Allnex | EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and tou...view more EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, EBECRYL® 160 exhibits the highest reactivity and the greatest viscosity reduction of oligomers. EBECRYL® 160 is a reactive diluent compatible with a wide range of acrylated resins used in UV/EB curing applications. Hardness, abrasion resistance, and high gloss properties make EBECRYL®160 popular for overprint varnishes, inks, coatings and electronic applications such as photoresists. view less | Request Sample |
| SpeedCure XFs01 | Sartomer Americas | SpeedCure XFs01 is a difunctional Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 258 nm. SpeedCure XFs01 provides low yellowing, surface cure and high reactivity when used at 0.5-5 wt% in UV curable formul...view more SpeedCure XFs01 is a difunctional Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 258 nm. SpeedCure XFs01 provides low yellowing, surface cure and high reactivity when used at 0.5-5 wt% in UV curable formulations. view less | |
| GENOMER* 4515 | Rahn USA Corp. | GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printin...view more GENOMER* 4515 is an amine-modified aromatic urethane acrylate. Formulations containing GENOMER* 4515 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4515 reduces oxygen inhibition in 3D topdown printing. GENOMER* 4515 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less | Request Sample |
| EBECRYL® 4765 | Allnex | EBECRYL® 4765 is an isocyanate functional aliphatic urethane acrylate supplied in ethyl acetate and designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl-bearing...view more EBECRYL® 4765 is an isocyanate functional aliphatic urethane acrylate supplied in ethyl acetate and designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process; UV/EB induced polymerization and NCO/OH reaction. view less | Request Sample |
| EBECRYL® 4950 | Allnex | EBECRYL® 4950 is an isocyanate-bearing aliphatic urethane acrylate diluted in 20 % butyl acetate. EBECRYL® 4950 can be combined with traditional hydroxyl (OH) functional binders or OH-acrylate functional binders, such EBECRYL® 4900, to form dual cure coat...view more EBECRYL® 4950 is an isocyanate-bearing aliphatic urethane acrylate diluted in 20 % butyl acetate. EBECRYL® 4950 can be combined with traditional hydroxyl (OH) functional binders or OH-acrylate functional binders, such EBECRYL® 4900, to form dual cure coatings (thermal NCO/OH and UV cure). EBECRYL® 4950 improves crosslink density, reactivity, and imparts scratch-, stain-, and abrasion resistance after UV cure. view less | Request Sample |
| 8000 | GIMEL Technical Materials | 8000 is an amino-functional acrylate used in coatings, inks, and adhesives. It improved deep and surface curing and shows low volatility and low odor after curing. It is free from restricted solvents and improves heat and chemical resistance. | Request Sample |
| GR-DVE | Hubei Gurun Technology Co., Ltd. | GR-DVE is a yellowish clear liquid and a vinyl etheric double functional monomer with low toxicity, quick curing speed, no oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic photocurable...view more GR-DVE is a yellowish clear liquid and a vinyl etheric double functional monomer with low toxicity, quick curing speed, no oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. view less | |
| EBECRYL® 8210 | Allnex | EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemic...view more EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion, a modifying oligomer to increase cure speed, solvent resistance and abrasion resistance, and dual cure coating systems. view less | Request Sample |
| PHENODUR® PR 285/55IB/B | Allnex | PHENODUR® PR 285/55IB/B is a curable unplasticized phenolic resin. It is used for coating the interior and exterior surfaces of packaging containers and cans; as high-adhesion, chemically resistant protective coatings for apparatus vessels, pipelines, etc...view more PHENODUR® PR 285/55IB/B is a curable unplasticized phenolic resin. It is used for coating the interior and exterior surfaces of packaging containers and cans; as high-adhesion, chemically resistant protective coatings for apparatus vessels, pipelines, etc.; for heat-curing phenolic/epoxide resin combinations. view less | Request Sample |
