- Home
- Paint & Coatings
- epoxy crosslinker
| Request Sample | BECKOPOX™ EH 694 | Allnex | BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit c...view more BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance. view less |
| Request Sample | MACRYNAL® GF 100/70BAC | Allnex | MACRYNAL® GF 100/70BAC is an epoxy functional acrylic crosslinker for ambient cure isocyanate-free 2-pack systems. Used in combination with specifically designed acrylics, this product leads to 2K acrylic systems that are most suited for the formulation o...view more MACRYNAL® GF 100/70BAC is an epoxy functional acrylic crosslinker for ambient cure isocyanate-free 2-pack systems. Used in combination with specifically designed acrylics, this product leads to 2K acrylic systems that are most suited for the formulation of low VOC topcoats with good outdoor resistance. view less |
| Request Sample | PHENODUR® EP 560 | Allnex | PHENODUR® EP 560 is a solution of a butyl etherified phenol formaldehyde crosslinker resin. It is used as a crosslinker for epoxy, hydroxyl, caboxyl and amide functional vehicles to produces baked films with excellent chemical resistance, corrosion protec...view more PHENODUR® EP 560 is a solution of a butyl etherified phenol formaldehyde crosslinker resin. It is used as a crosslinker for epoxy, hydroxyl, caboxyl and amide functional vehicles to produces baked films with excellent chemical resistance, corrosion protection and adhesion. view less |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| IDROBEN E 530 | Benasedo | IDROBEN E 530 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It could be also combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| Request Sample | GP CL-7002 | Univar Solutions | GP CL-7002 is a thermoplastic novolac used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings. . |
| Request Sample | GP CL-7003 | Univar Solutions | GP CL-7003 is a thermoplastic novolac used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings. . |
| Request Sample | GP CL-7004 | Univar Solutions | GP CL-7004 is a thermoplastic novolac resin used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings. . |
| JEFFAMINE® T-5000 POLYOXYPROPYLENEDIAMINE | Huntsman Performance Products | Trifunctional primary amine of approximately 5000 molecular weight used as crosslinker for polyurea, co-reactant in epoxy systems where adhesion promotion and flexibility are important. | |
| ASKOFEN R 9600 | ASK Chemicals | ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be...view more ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be formulated. Coatings based on ASKOFEN R 9600 provide good adhesion, hardness and flexibility as well as excellent sterilization resistance and chemical resistance with exception of strong alkalines. This product is recommended as a crosslinker for epoxy and polyester resins for packaging coatings, and is also suitable for can and coil coatings. view less | |
| EPOFEN W 1205 | Benasedo | EPOFEN W 1205 is a self crosslinking, Water-dilutable Epoxy–Phenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food c...view more EPOFEN W 1205 is a self crosslinking, Water-dilutable Epoxy–Phenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food contact paints only when the applied film is completely cross-linked and free of solvents, so that the content of extractable monomers becomes lower than the maximum allowed. view less | |
| Request Sample | Lonzacure™ DETDA 80 | Lonza | Lonzacure™ DETDA 80 is a low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking hardener for epoxy resin systems providing high temperature resistance even for bisphenol-A epoxy...view more Lonzacure™ DETDA 80 is a low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking hardener for epoxy resin systems providing high temperature resistance even for bisphenol-A epoxy resin systems. It can be applied in any liquid manufacturing process, e.g for composites. view less |
| Request Sample | Lonzacure™ DETDA 80 LC | Lonza | Lonzacure™ DETDA 80 LC is a low color and low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 LC also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking hardener for epoxy resin systems providing high temperature resistance even for bisphenol-A epoxy...view more Lonzacure™ DETDA 80 LC is a low color and low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 LC also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking hardener for epoxy resin systems providing high temperature resistance even for bisphenol-A epoxy resin systems. It can be applied in any liquid manufacturing process, e.g for composites. view less |
| Borchi® OXY - Coat 1101 | Borchers, A Company of OMG | Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in any coating drying by oxidative crosslinking, e.g. alkyds, vegetable oils, epoxy...view more Borchi® OXY - Coat 1101 is a metal-based catalyst which gives excellent performance at low use levels. In direct comparison to Cobalt based driers, improvements are noted in respect of drying activity, colour performance, gloss and haze. Excellent results can be achieved under adverse conditions. This product can be used in any coating drying by oxidative crosslinking, e.g. alkyds, vegetable oils, epoxy esters, polybutadiene etc. view less | |
| CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...view more CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. view less | |
| Request Sample | 3-Chloropropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimetho...view more 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimethoxysilane is also a key intermediate for the preparation of a variety of amino-, mercapto- and methacryloyloxyorganosilanes which are used as silane coupling agents. view less |
| Request Sample | CoatOSil* MP 200 Silane | Momentive | CoatOSil* MP 200 Silane is an epoxy functional silane oligomer that may be considered for use as an adhesion promoter or binder in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. It typically aids adhesion promotion and ...view more CoatOSil* MP 200 Silane is an epoxy functional silane oligomer that may be considered for use as an adhesion promoter or binder in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. It typically aids adhesion promotion and crosslinking of waterborne or solvent based coatings as well as dispersion of metallic pigments in waterborne systems. view less |
| Request Sample | CYMEL® U-1052-8 | Allnex | CYMEL® U-1052-8 resin is an n-butylated urea-formaldehyde crosslinking agent supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is particularly suitable for interior can coatings where it contributes to goo...view more CYMEL® U-1052-8 resin is an n-butylated urea-formaldehyde crosslinking agent supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is particularly suitable for interior can coatings where it contributes to good adhesion and pasteurization resistance. view less |
| Epokukdo YDF-2001 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-2001 is a 100% Bisphenol-F type taffy process solid resin. YDF-2001 is recommended for high solid system, low VOC coating wet paint and powder coating. Especially, YDF-2001 is also used for good flowing co-resin in combination with normal type 2-4 epoxy resin of hybrid system or straight epoxy...view more Epokukdo YDF-2001 is a 100% Bisphenol-F type taffy process solid resin. YDF-2001 is recommended for high solid system, low VOC coating wet paint and powder coating. Especially, YDF-2001 is also used for good flowing co-resin in combination with normal type 2-4 epoxy resin of hybrid system or straight epoxy system. Also, low molecular weight of YDF-2001 could have high crosslinking density of its cured properties with excellent film surface, mechanical strengths, adhesion, hardness, and chemical resistance. view less | |
| Request Sample | GP 7565 LF | Univar Solutions | GP 7565 LF is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to ma...view more GP 7565 LF is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to maximize chemical resistance. view less |
| Request Sample | 3-Chloropropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as c...view more 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltriethoxysilane is also the key intermediate for other Organo-functional silanes with triethoxy. view less |
| Request Sample | 3-Chloropropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties,...view more 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropylmethyldimethoxysilane is also the raw materials for other Organo-functional silanes with methyldimethoxy. view less |
| DOUBLEMER® TMP15EOTA | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® TMP15EOTA is a highly reactive trifunctional acrylated ester and a highly reactive trifunctional crosslinking agent which is polymerized readily by common free radical initiators. It is a good diluent for urethane, polyester, acrylate and epoxy...view more DOUBLEMER® TMP15EOTA is a highly reactive trifunctional acrylated ester and a highly reactive trifunctional crosslinking agent which is polymerized readily by common free radical initiators. It is a good diluent for urethane, polyester, acrylate and epoxy oligomer coating systems. It is particularly well suited to formulation of UV-reactive wood, inks, overprint varnishes, and paper coatings. view less | |
| DOUBLEMER® TMP3EOTA | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® TMP3EOTA is a highly reactive trifunctional acrylated ester and a highly reactive trifunctional crosslinking agent which is polymerized readily by common free radical initiators. It is a good diluent for urethane, polyester, acrylate and epoxy ...view more DOUBLEMER® TMP3EOTA is a highly reactive trifunctional acrylated ester and a highly reactive trifunctional crosslinking agent which is polymerized readily by common free radical initiators. It is a good diluent for urethane, polyester, acrylate and epoxy oligomer coating systems. It is particularly well suited to formulation of UV-reactive wood, inks, overprint varnishes, and paper coatings. view less | |
| Request Sample | GP LB-7575 | Univar Solutions | GP LB-7575 is an etherified bisphenol-A resin with free formaldehyde and free bisphenol-A contents of less than 0.1%. It is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epox...view more GP LB-7575 is an etherified bisphenol-A resin with free formaldehyde and free bisphenol-A contents of less than 0.1%. It is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to maximize chemical resistance. . view less |
| Titanate Coupling Agent FD-TPT | Zhejiang Feidian Chemical Co., Ltd. | FD-TPT is a colorless or pale yellowish liquid. It is applied to esterification, transesterification of the esters of acrylic acid etc., and the polymerization reaction of epoxy resin, bakelite, silicone, polybutadiene, PP, PE, and so on. It is used as a ...view more FD-TPT is a colorless or pale yellowish liquid. It is applied to esterification, transesterification of the esters of acrylic acid etc., and the polymerization reaction of epoxy resin, bakelite, silicone, polybutadiene, PP, PE, and so on. It is used as a crosslinking agent for various polymers or resins in coating and paint. It improves adhesive bonding between coating and substrate as well as improves dispersion, coloring, and anti-corrosion. It is also used as surface modifier, adhesion promoter, and additive for paraffin and oil. view less | |
| Request Sample | CYMEL® U-227-8 | Allnex | CYMEL® U-227-8 is a partially n-butylated urea crosslinker with a medium degree of alkylation, medium methylol content, rather low imino functionality, medium to low molecular weight and medium viscosity. It is recommended for use in epoxy/urea metal prim...view more CYMEL® U-227-8 is a partially n-butylated urea crosslinker with a medium degree of alkylation, medium methylol content, rather low imino functionality, medium to low molecular weight and medium viscosity. It is recommended for use in epoxy/urea metal primers, metal decorating, and drum and dipping enamels. view less |
| Request Sample | CYMEL® NF 2000A | Allnex | CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films th...view more CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. view less |
| Epoxy Coil Coating Primer (Formulation #2.2) | GRACE | Epoxy Coil Coating Primer (Formulation #2.2) is a formulation that utilizes SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Epikote 1007 and E...view more Epoxy Coil Coating Primer (Formulation #2.2) is a formulation that utilizes SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Epikote 1007 and Epikote 1009 are standard epoxy resins used in coil coating primer applications. UFR 80 is a typical urea based crosslinker used in these applications. The cure response within this formulation was controlled by the use of Epoxy blocked Phosphoric acid (co-catalyst) and Halox 650 (dicarboxylic-acid co-catalyst). These components prevent the interaction of SHIELDEX® anti-corrosive pigment with the acid catalysts and any acid funtionality on the resin systems, thus ensuring maximum cure response. The SHIELDEX® C 303 anti-corrosive pigment containing epoxy coil primer was applied on Bonder 1303 (ex Chemetall) and Granodine C 108 (ex Henkel) treated galvanised steel test panels. The primer was applied by bar coater to a dry film thickness of 5 – 7 microns. Cure was to a peak metal temperature (PMT) of 216 – 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 – 241 °C. view less | |
| SiSiB® PC3200 | SiSiB SILICONES | SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy...view more SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less | |
| SiSiB® PC3300 | SiSiB SILICONES | SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy...view more SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less | |
| SiSiB® PC3500 | SiSiB SILICONES | SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy...view more SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less | |
| SiSiB® PC3400 | SiSiB SILICONES | SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy...view more SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less | |
| Request Sample | VESTAMIN® A 139 | Evonik Operations GmbH, BL Crosslinkers | VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reac...view more VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reacting with the isocyanate groups under formation of urea structures. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less |
| Request Sample | Laromer® EA 9101 | BASF Dispersions & Resins | Laromer® EA 9101 is an epoxy acrylate oligomer for the formulation of energy curable inks and coatings, commonly used as a pigment wetting agent in offset applications. It exhibits moderate cure speed due to its average double bond density, but is a good ...view more Laromer® EA 9101 is an epoxy acrylate oligomer for the formulation of energy curable inks and coatings, commonly used as a pigment wetting agent in offset applications. It exhibits moderate cure speed due to its average double bond density, but is a good crosslinker due to its high functionality. The medium double bond density makes it a prime choice as flexibiliser for hard, rigid films as for example for those based on bisphenol A epoxy diacrylate. The high flexibility supports substrate wetting with good flow and levelling and improves adhesion on polar metal surfaces. Laromer® EA 9101 is compatible with all mono- and multifunctional monomers as well as with all common polyester acrylates, epoxy acrylates and urethane acrylates. Laromer® EA 9101 is an important formulation component for UV/EB low migration inks and overprint varnishes due to its high molecular weight. view less |
| DOUBLEMER® TMP3EOTA-A | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® TMP3EOTA-A is a highly reactive trifunctional acrylated ester and a highly reactive trifunctional crosslinking agent which is polymerized readily by common free radical initiators. This clear liquid is solvent free, and its chemical name is Ethoxylated Trimethylolpropane Triacrylate. It is a good diluent for urethane, polyester, acrylate and epoxy...view more DOUBLEMER® TMP3EOTA-A is a highly reactive trifunctional acrylated ester and a highly reactive trifunctional crosslinking agent which is polymerized readily by common free radical initiators. This clear liquid is solvent free, and its chemical name is Ethoxylated Trimethylolpropane Triacrylate. It is a good diluent for urethane, polyester, acrylate and epoxy oligomer coating system. It is particularly well suited to formulation of UV-reactive wood, inks, overprint varnishes, and paper coatings. view less | |
| Request Sample | BECKOPOX™ EP 2307w/45WAMP | Allnex | BECKOPOX® EP 2307w/45WAMP is a high-molecular epoxy resin (Type 7) dispersion. In combination with suitable crosslinkers (amino or phenolic resins and accelerators) it is possible to formulate stoving enamels with excellent chemical and heat sterilisation...view more BECKOPOX® EP 2307w/45WAMP is a high-molecular epoxy resin (Type 7) dispersion. In combination with suitable crosslinkers (amino or phenolic resins and accelerators) it is possible to formulate stoving enamels with excellent chemical and heat sterilisation resistance and good adhesion and corrosion performance. The mixing ratio of binder to crosslinker can vary from 85 : 15 up to 70 : 30 (calculated on solids). The stoving conditions depending on the crosslinker are in the range of 30 minutes 140 °C up to 10 minutes at 200 °C resulting in coatings with high hardness and high chemical resistance. view less |
| Polyester-Melamine Coil Coating Primer (Formulation #2.1) | GRACE | Polyester-Melamine Coil Coating Primer (Formulation #2.1) is a guideline formulation offered to highlight the anti-corrosive and adhesion performance of SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Dynapol L205 and Dynapol L208 are high molecular weight polyester resins widely used in coil coating primer applications for both building and domestic appliance applications. Cymel 350 is a typical melamine based crosslinker. The cure reponse within this formulation was controlled by the use of Silane A187 (Silane Ester), Epoxy...view more Polyester-Melamine Coil Coating Primer (Formulation #2.1) is a guideline formulation offered to highlight the anti-corrosive and adhesion performance of SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Dynapol L205 and Dynapol L208 are high molecular weight polyester resins widely used in coil coating primer applications for both building and domestic appliance applications. Cymel 350 is a typical melamine based crosslinker. The cure reponse within this formulation was controlled by the use of Silane A187 (Silane Ester), Epoxy blocked Phosphoric acid (co-catalyst), EDBSA (sulphonic acid co-catalyst) and Halox 650 (Dicarboxylic acid). These components prevent the interaction of SHIELDEX® anti-corrosive pigments with the acid catalysts and any acidic functionality on the resins, thus ensuring maximum cure response. view less | |
| SiSiB® PC1200 | SiSiB SILICONES | SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy...view more SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants. view less | |
| Acrylamac® 232-1176 | Polynt Composites | Acrylamac® 232-1176 is a thermosetting solution acrylic resin designed to crosslink with epoxy resins for metal applications. | |
| K-FLEX® 171-90 | King Industries, Inc. | K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy...view more K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy flexibilizer. view less | |
| Acrylamac® 232-1128 | Polynt Composites | Acrylamac® 232-1128 is a thermosetting solution acrylic resin designed to crosslink with epoxy resins for can and metal decorating coatings, HAPs-free. | |
| Request Sample | Luna-mer B-55 | DKSH | Luna-mer B-55 is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid powder coatings, which provides consistent gloss when cured at 180°C minimum. This product is available in Europe, Asia and North America. |
| Request Sample | Luna-mer B-68 | DKSH | Luna-mer B-68 is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid powder coatings, which provides consistent gloss when cured at 180°C minimum. This product is available in Europe, Asia and North America. |
| Request Sample | GP 7571 | Univar Solutions | GP 7571 is a heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxylcontaining polymers such as epoxies, polyesters, vinyls and acrylics. It is designed to maximize chemical resistance. |
| Request Sample | CYMEL® U-216-8 | Allnex | CYMEL® U-216-8 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and xylene. It displays excellent compatibility with most hydrophobic resins, such as epoxies, and can contribute to improved leveling and adhesion ...view more CYMEL® U-216-8 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and xylene. It displays excellent compatibility with most hydrophobic resins, such as epoxies, and can contribute to improved leveling and adhesion characteristics. This product is recommended as a crosslinking resin in primer coatings, can coatings, and metal deco finishes. view less |
| Request Sample | BYK®-370 | BYK | BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethan...view more BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethanes. It can also crosslink with the following binder systems: alkyd/melamine, polyester/melamine, acrylic/melamine, self-crosslinking acrylates, and epoxies. BYK-370 increases the surface slip. view less |
| Request Sample | Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...view more Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. view less |
| Request Sample | Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...view more Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. view less |
| Request Sample | BYK®-066 N | BYK | BYK®-066 N is a solution of foam destroying polysiloxanes. This product is highly efficient and offers optimum defoaming while utilizing only minimal quantities of incompatible substances. Preferred binders are: chlorinated rubber, epoxies, two-pack polyu...view more BYK®-066 N is a solution of foam destroying polysiloxanes. This product is highly efficient and offers optimum defoaming while utilizing only minimal quantities of incompatible substances. Preferred binders are: chlorinated rubber, epoxies, two-pack polyurethane systems, alkyd/melamine, alkyds, and self-crosslinking acrylates. view less |
| Request Sample | KX-99 | Gellner Industrial, LLC | Ottopol KX-99 is a hydroxyl functional cationic acrylic solution polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. It is recommended that a maximum of 20% polyisocyanate and 20% epoxy silane is required to fo...view more Ottopol KX-99 is a hydroxyl functional cationic acrylic solution polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. It is recommended that a maximum of 20% polyisocyanate and 20% epoxy silane is required to formulate the fastest and most resistant coating. In less than an hour, the film will become water resistance. After two hours, the film will have over 100 double rubs acetone resistance. The dried film will also resist staining. view less |
| Request Sample | LA-8844 | US Polymers - Accurez LLC | LA-8844 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-8844 have the chemical resistance of two component epoxy...view more LA-8844 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-8844 have the chemical resistance of two component epoxy systems, but are far superior in terms of color and gloss retention. view less |
| Request Sample | LA-7588 | US Polymers - Accurez LLC | LA-7588 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-7588 have the chemical resistance of two component epoxy...view more LA-7588 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-7588 have the chemical resistance of two component epoxy systems, but are far superior in terms of color and gloss retention. view less |
| Acrylamac® 232-1185 | Polynt Composites | Acrylamac® 232-1185 is a water reducible solution acrylic designed for industrial electrocoating or dip tanks where chemical, stain and corrosion resistance are required. This resin provides stable low VOC systems when crosslinked with melamine, urea or epoxy...view more Acrylamac® 232-1185 is a water reducible solution acrylic designed for industrial electrocoating or dip tanks where chemical, stain and corrosion resistance are required. This resin provides stable low VOC systems when crosslinked with melamine, urea or epoxy resins. It features hard films with excellent gloss and performance properties. Manufactured in North America. All components of this product are listed on the DSL. view less | |
| K-FLEX® 7301 | King Industries, Inc. | K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy...view more K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. view less | |
| Request Sample | HPP 6000-65 PMP | US Polymers - Accurez LLC | HPP 6000-65 PMP is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on HPP 6000-65 PMP have the chemical resistance of two component epoxy...view more HPP 6000-65 PMP is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on HPP 6000-65 PMP have the chemical resistance of two component epoxy systems, but are far superior in terms of color and gloss retention. view less |
| Request Sample | HPP 6000-65 PMA | US Polymers - Accurez LLC | HPP 6000-65 PMA is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on HPP 6000-65 PMA have the chemical resistance of two component epoxy...view more HPP 6000-65 PMA is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on HPP 6000-65 PMA have the chemical resistance of two component epoxy systems, but are far superior in terms of color and gloss retention. view less |
| K-FLEX® XM-B301 | King Industries, Inc. | K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisoc...view more K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. This product appears as a clear amber liquid and offers reduced induction time, adhesion, corrosion resistance, viscosity reduction, and elimates solvent popping and pinholes. It is soluble in esters, alcohols, aromatics, and ketones. It is insoluble in aliphatic hydrocarbons and water. K-FLEX® XM-B301 can be applied in epoxy-polyamide primers for industries like aerospace, automotive, marine, truck/bus/rail, and industrial maintenance. view less | |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| K-PURE® TAG-2678 | King Industries, Inc. | K-PURE® TAG-2678 is a quaternary ammonium blocked triflic acid thermal acid generator specifically made to be used in thermally cured microlithography coatings. It has a sharp activation profile and does not provide any volatile components when activated. K-PURE® TAG-2678 is ideally appropriate for amino crosslinkable melamine, self-condensed melamine, glycoluril, urea or silanol and alkoxysilane crosslinkable resins. K-PURE® TAG-2678 can also be used to stimulize the polymerization of epoxy...view more K-PURE® TAG-2678 is a quaternary ammonium blocked triflic acid thermal acid generator specifically made to be used in thermally cured microlithography coatings. It has a sharp activation profile and does not provide any volatile components when activated. K-PURE® TAG-2678 is ideally appropriate for amino crosslinkable melamine, self-condensed melamine, glycoluril, urea or silanol and alkoxysilane crosslinkable resins. K-PURE® TAG-2678 can also be used to stimulize the polymerization of epoxy resins and ring opening polymerization of cyclic ethers as well as other monomers capable of undergoing cationic polymerization. This product appears as white crystals and is soluble in PGME, ethyl lactate, acetone, and propylene carbonate. It has limited solubility in PGMEA and is almost insoluble in water. view less | |
| Request Sample | LA-9460 | US Polymers - Accurez LLC | LA-9460 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9460 have the chemical resistance of two component epoxy...view more LA-9460 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9460 have the chemical resistance of two component epoxy systems, but are far superior in terms of color and gloss retention. LA-9460 is a pure aliphatic resin and has excellent weathering properties due its unique design. view less |
| Request Sample | LA-9312 | US Polymers - Accurez LLC | LA-9312 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9312 have the chemical resistance of two component epoxy...view more LA-9312 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9312 have the chemical resistance of two component epoxy systems, but are far superior in terms of color and gloss retention. LA-9312 is a pure aliphatic resin and has excellent weathering properties due its unique design. view less |
| Request Sample | LA-9313 | US Polymers - Accurez LLC | LA-9313 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9313 have the chemical resistance of two component epoxy...view more LA-9313 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9313 have the chemical resistance of two component epoxy systems, but are far superior in terms of color and gloss retention. LA-9313 is a pure aliphatic resin and has excellent weathering properties due its unique design. view less |
| Request Sample | Ottopol 510-28 | Gellner Industrial, LLC | Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as ...view more Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as well as excellent solvent, salt fog, and alkali-resistance. Ottopol 510-28 offers good adhesion to non-porous surfaces and provides better storage stability, superior hardness, and improved flow. It imparts superb weatherability and improved solubility. view less |
| Phenoxy PK™FE | Gabriel Performance Products | Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...view more Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™FE may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™FE is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HB | Gabriel Performance Products | Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...view more Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HB may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HB is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HH | Gabriel Performance Products | Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...view more Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HH may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HH is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Request Sample | LA-9378 | US Polymers - Accurez LLC | LA-9378 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings supplied in a zero VOC solvent. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9378 have the chemical resistance of two component epoxy...view more LA-9378 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings supplied in a zero VOC solvent. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9378 have the chemical resistance of two component epoxy systems, but are far superior in terms of color and gloss retention. LA-9378 is a pure aliphatic resin and has excellent weathering properties due its unique design. view less |
| Phenoxy PK™HA | Gabriel Performance Products | Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...view more Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HA may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HA is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Request Sample | LA-9368 | US Polymers - Accurez LLC | LA-9368 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings supplied in a low VOC emission solvent. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9368 have the chemical resistance of two component epoxy...view more LA-9368 is a hydroxyl functional polyester designed to crosslink at room temperature with polyisocyanates to produce high performance coatings supplied in a low VOC emission solvent. When combined with aliphatic polyisocyanates, coatings with superior hardness, abrasion, chemical, corrosion and weather resistance are produced. Coatings based on LA-9368 have the chemical resistance of two component epoxy systems, but are far superior in terms of color and gloss retention. LA-9368 is a pure aliphatic resin and has excellent weathering properties due its unique design. view less |
| Request Sample | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to...view more 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21S is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to the dual epoxide functionality which can react with hydroxyl, carboxyl or amine groups of polymers contained in the system. End uses take advantage of the UV stability and low viscosity compared to other epoxy resin. This grade has an assay of 90% min. view less |
| Request Sample | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 | PhibroChem | 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to ...view more 3,4-Epoxycyclohexylmethyl 3,4-Epoxycyclohexane Carboxylate TTA21 is a pale yellow to colorless transparent liquid. Two package and UV cure formulas use TTA21 to create better crosslink and enhance adhesion. Each molecule creates high cross linking due to the dual epoxide functionality which can react with hydroxyl, carboxyl or amine groups of polymers contained in the system. End uses take advantage of the UV stability and low viscosity compared to other epoxy resin. This grade has an assay of 90% min and a weight per epoxide of 131-143. view less |
| K-FLEX® 188 | King Industries, Inc. | K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure p...view more K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure produce exceptional and consistent performance and broad compatibility. K-FLEX® 188's primary hydroxyl groups also produce reactivity with epoxies in cationic thermal cure systems. This product is 100% active and offers, good flexibility, adhesion to plastics, and high resistivity. It appears as a clear, light straw liquid and is soluble in the aerospace, automotive refinish, and marine maintenance industries along with plastic substrates, overprint varnishes, glass laminates, and optical coatings. view less | |
| Dynasylan® GLYMO | Evonik Operations GmbH, BL Silanes | Dynasylan® GLYMO is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® GLYMO to bind chemically to both inorganic materials (e.g. glass, met...view more Dynasylan® GLYMO is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® GLYMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYMO is a colorless low-viscosity liquid with a slight terpentine-like odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons. view less | |
| Dynasylan® GLYEO | Evonik Operations GmbH, BL Silanes | Dynasylan® GLYEO is a bifunctional organosilane possessing a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactivity allows Dynasylan® GLYEO to bind chemically to both inorganic materials (e.g. glass, ...view more Dynasylan® GLYEO is a bifunctional organosilane possessing a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactivity allows Dynasylan® GLYEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYEO is a colorless low-viscosity liquid with a slight terpentine-like odor. It is soluble in alcohols, ketones and aliphatic and aromatic hydrocarbons. view less |
- 1