UL Prospector

Success!

Successfully saved your search
161 Results
Chromate-Free 2K Epoxy Phenolic Etch Primer using HALOX 430 JM & HALOX 550 (Formulation #30-HH) ICL Phosphate Specialty Chromate-Free 2K Epoxy Phenolic Etch Primer using HALOX® 430 JM & HALOX® 550
Chromate Free 2K Epoxy Phenolic Etch Primer using HALOX SZP JM and HALOX 550 (Formulation #30-HH) ICL Phosphate Specialty Chromate Free 2K Epoxy Phenolic Etch Primer using HALOX® SZP 391 JM & HALOX® 550
Chicure® AAA Double Bond Chemical Ind., Co., Ltd. Chicure® AAA is a white crystalline powder that is soluble in benzene, toluene, and xylene. It is used as a hardening accelerator for epoxy, phenol, silicone, and acrylic resins.
Epotec® YDPN 661 Aditya Birla Epotec® YDPN 661 is a multifunctional epoxy phenol novolac resin. This product is well suited for use in chemical resistant coatings & linings, chemical resistant floor topcoats, adhesives, coil coatings, and marine & protective coatings.
CHS-Epoxy 050 Spolchemie CHS-Epoxy 050 is a high molecular weighted solid epoxy resin. This is a type 7 solid epoxy resin with epoxide equivalent weight (EEW) range between 1550-2000 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings.
CHS-Epoxy 030 Spolchemie CHS-Epoxy 030 is a high molecular weighted solid epoxy resin. This is a type 9 solid epoxy resin with epoxide equivalent weight (EEW) range between 2220-4000 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings.
Epotec® YDPN 631 Aditya Birla Epotec® YDPN 631 is a multifunctional, high viscosity epoxy phenol novolac resin delivering good chemical resistance and performance at elevated temperatures. This product is ideal for use in marine & protective coatings, adhesives, and coil coatings.
CHS-Epoxy 070 Spolchemie CHS-Epoxy 070 is a clear colored high molecular weighted unmodified solid epoxy resin. This is a type 6 solid epoxy resin with epoxide equivalent weight (EEW) range between 1350-1640 g/mol. This product is primarily used for producing epoxy-phenolic, can ...view more CHS-Epoxy 070 is a clear colored high molecular weighted unmodified solid epoxy resin. This is a type 6 solid epoxy resin with epoxide equivalent weight (EEW) range between 1350-1640 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings. view less
Epotec® YD 907 Aditya Birla Epotec® YD 907 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. This product is ideal for use in can coatings, coil coat...view more Epotec® YD 907 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. This product is ideal for use in can coatings, coil coatings, and linings for tubes and drums. view less
Epotec® YD 019S Aditya Birla Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and ...view more Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. view less
Epotec® YD 019 Aditya Birla Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resist...view more Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. view less
Epotec® YD 909 Aditya Birla Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical r...view more Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. view less
Epotec® YD 017 Aditya Birla Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters f...view more Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. view less
Epotec® YD 017S Aditya Birla Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufactu...view more Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. view less
ADDITOL® XW 6567 Allnex Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects ...view more Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects formed during the mechanical crimping process. It is also recommended in all other coating types requiring food compliance with EU and/or US regulations. view less Request Sample
EPOFEN W 1205 Benasedo EPOFEN W 1205 is a self crosslinking, Water-dilutable EpoxyPhenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food c...view more EPOFEN W 1205 is a self crosslinking, Water-dilutable EpoxyPhenolic modified Resin, suitable for can coating applications. EPOFEN W 1205 is only made with Raw-Materials included in the Positive list of FDA 21 CFR 175.300. Our Resin can be used for food contact paints only when the applied film is completely cross-linked and free of solvents, so that the content of extractable monomers becomes lower than the maximum allowed. view less
TA-816 PCI Group, Inc. TA-816 is a reactive siloxane polymer blend which can produce a rough or textured appearance to paints and coatings. It can be used with lacquers, alkyd, epoxy, melamine phenolic, polyester and urethane systems.
SEA-V236M50 DKSH SEA-V236M50 is a phenol novolac epoxy acrylate oligomer. This product is characterized by its fast cure response, adhesive strength and heat and chemical resistance. SEA-V236M50 provides fast cure response when exposed to ultraviolet light (UV). Phenol no...view more SEA-V236M50 is a phenol novolac epoxy acrylate oligomer. This product is characterized by its fast cure response, adhesive strength and heat and chemical resistance. SEA-V236M50 provides fast cure response when exposed to ultraviolet light (UV). Phenol novolac Epoxy Acrylate / TMPTA 50%. view less Request Sample
Rockforce® MS610-Roxul®1000 Lapinus Fibres BV Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in r...view more Rockforce® MS610-Roxul®1000 is a highly cleaned mineral fibre. Its amino-silane surface treatment gives it an optimum bond in phenol, epoxy and resins alike, resulting in better reinforcement properties. Rockforce® MS610-Roxul®1000 shows added values in rheology control, dimensional stability, reinforcement, heat resistance, and chemical bonding with phenol and epoxy resins view less
AMA PCI Group, Inc. AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clea...view more AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clear topcoats. view less
Epoxy Hardener G-92 Estron Chemical, Inc. Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings a...view more Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings are noted. view less
SiSiB® PC2520 SiSiB SILICONES SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyuretha...view more SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins for foundry resins and abrasives; as an additive for sealants and adhesives; or as an additive and/or primer for paints and varnishes to improve adhesion to the substrate. view less
ORDISOL SWT-57 Concentrol, S.A., Productos ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL...view more ORDISOL SWT-57 is a silicone additive for application in paints, inks and coatings. Is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl resin systems. The finishes that have incorporated the ORDISOL SWT-57 can be repainted in most cases. view less
AMMA PCI Group, Inc. AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic...view more AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic, polyamide, polyester, urea and urethane. view less
DOWSIL™ 57 Additive Dow Performance Silicones DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less
DOWSIL™ 57 Additive Univar Solutions DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less Request Sample
Propylene carbonate BASF Corporation, Chemical Intermediates Propylene carbonate solvent for polar resins ( i.e. polyesters, polyurethanes, polyester imides and plasticizers). Propylene carbonate is suitable for wire enamels based on polyesters, polyurethanes, polyesterimides, epoxy and phenol resins. Propylene c...view more Propylene carbonate solvent for polar resins ( i.e. polyesters, polyurethanes, polyester imides and plasticizers). Propylene carbonate is suitable for wire enamels based on polyesters, polyurethanes, polyesterimides, epoxy and phenol resins. Propylene carbonate is a highly polar solvent. A modified version, Solvarnol® PCA may replace phenol, cresols and xylenols in electro insulation formulations. view less
SiSiB® PC2521 SiSiB SILICONES SiSiB® PC2521 is a colorless transparent liquid with an alcohol-like odor. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, ...view more SiSiB® PC2521 is a colorless transparent liquid with an alcohol-like odor. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins for foundry resins and abrasives; as an additive for sealants and adhesives; or as an additive and/or primer for paints and varnishes to improve adhesion to the substrate. view less
Cardanol Beijing Entrepreneur Science &Trading Co., Ltd. Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...view more Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. view less
Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) Hainan Zhongxin Chemical Co., Ltd. Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) is a clear - yellowish liquid that has a chlorine content of 47%. It is primarily used as a general purpose chlorinated phosphate flame retardant. Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) is recommended for use in multiple resin types including, plyurethane, epoxy and phenolic...view more Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) is a clear - yellowish liquid that has a chlorine content of 47%. It is primarily used as a general purpose chlorinated phosphate flame retardant. Tris(1,3-Dichloro-2-Propyl) Phosphate (TDCPP) is recommended for use in multiple resin types including, plyurethane, epoxy and phenolicview less
PHENODUR® PR 566/65BX Allnex PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer o...view more PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer of metal containers with high adhesion, excellent flexibility and good chemical resistance. view less Request Sample
GP 2056 Univar Solutions GP 2056 is Epoxy hardener is a flake phenolic novolac resin developed as a curing agent for epoxy resins in oilfield, molding compounds, coatings, copper clad laminates, and electrical applications. Request Sample
Silane ATPN-1110 Beijing Entrepreneur Science &Trading Co., Ltd. Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy...view more Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. view less
Epotec® TH 981 Aditya Birla Epotec® TH 981 is a solid phenolic hardener based on epoxy resin and bisphenol-A. This product is ideal for use in both decorative and functional powder coatings.
Resiflow® LV Estron Chemical, Inc. Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy...view more Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less
Epotec® TH 982 Aditya Birla Epotec® TH 982 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator. This product is ideal for use in both decorative and functional powder coatings.
Resiflow® L-210 Estron Chemical, Inc. Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy...view more Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less
GP CL-7002 Univar Solutions GP CL-7002 is a thermoplastic novolac used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings. . Request Sample
Silane Coupling Agent KH-551 Zhejiang Feidian Chemical Co., Ltd. KH-551 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler, or reinforcement and resins that react with the amino group. It is especially recommended to thermoplastic and thermosetting resins such as epoxy, PBT, and polyurethane. It can improve reinforced plastic's physical properties and electric properties as flexural strength, compression strength, and shear strength. KH-551 also can improve the dispersion and wet ability of filler in the high molecular materials. It is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy...view more KH-551 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler, or reinforcement and resins that react with the amino group. It is especially recommended to thermoplastic and thermosetting resins such as epoxy, PBT, and polyurethane. It can improve reinforced plastic's physical properties and electric properties as flexural strength, compression strength, and shear strength. KH-551 also can improve the dispersion and wet ability of filler in the high molecular materials. It is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. view less
GP CL-7004 Univar Solutions GP CL-7004 is a thermoplastic novolac resin used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings. . Request Sample
GP CL-7003 Univar Solutions GP CL-7003 is a thermoplastic novolac used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings. . Request Sample
Epotec® TH 983 Aditya Birla Epotec® TH 983 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator and flow modifier. This product is ideal for use in both decorative and protective powder coatings.
Borchi® Gol PL Borchers, A Company of OMG Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reduction in adhesion between base and top coat. lt can therefore be used in primers and undercoats. This product is particularly effective in unsaturated, paraffin-free polyester resins, epoxy resins and combinations of epoxy resins with phenolic...view more Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reduction in adhesion between base and top coat. lt can therefore be used in primers and undercoats. This product is particularly effective in unsaturated, paraffin-free polyester resins, epoxy resins and combinations of epoxy resins with phenolic resins or amino resins. view less
Epokukdo YDPN-631 Kukdo Chemical Co., Ltd. Epokukdo YDPN-631 is a phenol novolac epoxy that has advantageous characteristics of good adhesion strength, excellent heat and chemical resistance because of its multi-functional groups in one molecule fully cross-linked. Therefore, it has excellent phys...view more Epokukdo YDPN-631 is a phenol novolac epoxy that has advantageous characteristics of good adhesion strength, excellent heat and chemical resistance because of its multi-functional groups in one molecule fully cross-linked. Therefore, it has excellent physical properties in addition to the basic reactivity of general epoxy resin. YDPN-631 having low viscosity is also applicable for the non-solvent type area compared with YDPN-638. view less
Epotec® YDPN 638 Aditya Birla Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings...view more Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, tank linings, chemical resistant coatings, adhesives, and coil coatings. view less
HALOX® SZP-391 ICL Phosphate Specialty HALOX® SZP-391 is a zinc phosphate-based corrosion inhibiting pigment. This product is most commonly used in solvent and water-based paint and coating manufacturing applications. Request Sample
ALNOVOL® PN 650/60B Allnex ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid impro...view more ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food. view less Request Sample
GABEPRO® GPM-891 Gabriel Performance Products GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinnin...view more GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinning problems. GABEPRO® GPM-891 is designed to provide a gel time of 5 minutes when formulated with a standard bis-phenol A epoxy resin. view less
Epotec® YDPN 638LV Aditya Birla Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & p...view more Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, chemical resistant coatings, tank linings, adhesives, and coil coatings. view less
SiSiB® PC1110 SiSiB SILICONES SiSiB® PC1110 is a colorless transparent liquid. It is an amino-functional silane that may be used in applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can be used in thermoplastic resins and thermosetting resins such as epoxy, PBT, polyurethane etc.; to improve reinforced plastic’s physical properties and electric properties as flexural strength, compression strength and shear strength; improve the dispersion and wet ability of filler in the high molecular materials; promote adhesion and sealant (such as polyurethane, epoxy...view more SiSiB® PC1110 is a colorless transparent liquid. It is an amino-functional silane that may be used in applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can be used in thermoplastic resins and thermosetting resins such as epoxy, PBT, polyurethane etc.; to improve reinforced plastic’s physical properties and electric properties as flexural strength, compression strength and shear strength; improve the dispersion and wet ability of filler in the high molecular materials; promote adhesion and sealant (such as polyurethane, epoxy, and phenol); improve the wet resistance and mechanical performance in the glass wool and FRP products when added in to phenol resins; promote adhesion in RTV silicones and other hybrid sealants including SPURSM technology, particularly for difficult substrates such as ABC, PVC ad Poly Shyrene; and as a component in primer systems for hybrid and polyurethane sealants. view less
Epotec® YDPN 638X-80 Aditya Birla Epotec® YDPN 638X-80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in xylene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance. This product is...view more Epotec® YDPN 638X-80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in xylene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance. This product is ideal for use in chemical resistant coatings, tank linings, and marine paints. view less
HALOX® 430 JM ICL Phosphate Specialty HALOX® 430 JM is a jet-milled, heavy metal-free corrosion inhibitor. This product is most commonly used as an alternative to heavy metal-based corrosion inhibitors in paint and coating manufacturing applications. Request Sample
Epotec® YDPN 638 MEK 80 Aditya Birla Epotec® YDPN 638 MEK 80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in methyl ethyl ketene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance....view more Epotec® YDPN 638 MEK 80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in methyl ethyl ketene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance. This product is ideal for use in can, coil, marine, and protective coatings. view less
Razeen® 6138 Jubail Chemical Industries Co. Razeen® 6138 is a semi-solid phenol novolac based multifunctional epoxy resin. This product is characterized by its viscosity and its ability to improve the chemical resistance and mechanical properties in end products. Razeen® 6138 is used in marine and ...view more Razeen® 6138 is a semi-solid phenol novolac based multifunctional epoxy resin. This product is characterized by its viscosity and its ability to improve the chemical resistance and mechanical properties in end products. Razeen® 6138 is used in marine and protective coatings, chemical resistant coatings, adhesives, and coil coatings. view less
HALOX® 550 ICL Phosphate Specialty HALOX® 550 is a liquid organic-inorganic sol-gel corrosion inhibitor. This product is most commonly used to provide corrosion protection in thin film coating manufacturing applications. Request Sample
ASKOFEN™ R 9600 ASK Chemicals ASKOFEN™ R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can b...view more ASKOFEN™ R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be formulated. Coatings based on ASKOFEN™ R 9600 provide good adhesion, hardness and flexibility as well as excellent sterilization and chemical resistance with exception of strong alkalines. This product is recommended as a crosslinker for epoxy and polyester resins for packaging coatings, and is also suitable for can and coil coatings. view less
CAPCURE® 3830-CB Gabriel Performance Products CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...view more CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. view less
JONCRYL® 819 BASF Dispersions & Resins JONCRYL 819 is a carboxyl functional solid grade acrylic resin designed for powder coating applications. When reacted with a bis-phenol A epoxy to formulate a hybrid coating, the resultant film displays all of the flexibility characteristics associated wi...view more JONCRYL 819 is a carboxyl functional solid grade acrylic resin designed for powder coating applications. When reacted with a bis-phenol A epoxy to formulate a hybrid coating, the resultant film displays all of the flexibility characteristics associated with more traditional polyester/epoxy hybrids with the additional advantages of superior QUV stability, excellent chemical resistance, and excellent hardness. JONCRYL 819 should be considered as a polyester replacement in hybrid systems where improvements in hardness, chemical resistance and UV resistance are desired. In addition, JONCRYL 819 epoxy hybrids produce excellent low gloss coatings (in combination with JONCRYL 848) that are frequently more economical than polyester or epoxy bases low gloss systems view less Request Sample
Epokukdo KDU-657TH70 Kukdo Chemical Co., Ltd. Epokukdo KDU-657TH70 diluted with 15wt.% each TMPTA, 2-HEMA monomer is a UV curable acrylate epoxy oligomer of bisphenol-A/phenol novolac type. KDU-657TH70 has good adhesion and outstanding chemical resistance. KDU-657TH70 is generally used for polyester ...view more Epokukdo KDU-657TH70 diluted with 15wt.% each TMPTA, 2-HEMA monomer is a UV curable acrylate epoxy oligomer of bisphenol-A/phenol novolac type. KDU-657TH70 has good adhesion and outstanding chemical resistance. KDU-657TH70 is generally used for polyester film UV coating and P.C.B. Ink because of its good electric properties and excellent chemical resistance. Curing-speed and viscosity of KDU-657TH70 depend on diluents, photo initiators and additives. view less
KBE-9103 Shin-Etsu Silicones of America KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9...view more KBE-9103 is a unique, newly developed silane coupling agent that enables improved performance in many applications such as compositions containing epoxy resins or phenolic resins. Unlike typical primary amino groups, the ketimine functional group of KBE-9103 is a protected amine that does not react with most epoxides, acidic groups, or phenols. However, in the presence of moisture, the ketimine functional group readily generates a free primary amine that will react with epoxides, acidic groups, and phenols. The latent reactivity of this protected amine makes KBE-9103 an ideal coupling agent for many one-component systems in which exposure to ambient moisture quickly and easily provides a highly reactive coupling agent. view less
KBE-585 Shin-Etsu Silicones of America KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy...view more KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBE-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBE-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less
Silane Coupling Agent KH-602 Zhejiang Feidian Chemical Co., Ltd. KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy...view more KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealants, providing lower reactivity and therefore higher stability in the aqueous environment. view less
KBM-585 Shin-Etsu Silicones of America KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosilanes, the ureido group of KBM-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy...view more KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosilanes, the ureido group of KBM-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBM-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBM-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less
SiSiB® PC1220 SiSiB SILICONES SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic...view more SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites; as a starting material in the synthesis of amino-functional silicones; or as an adhesion promoters in one-part silylated urethane adhesives and sealants. view less
JONCRYL® 821 BASF Dispersions & Resins JONCRYL 821 is a carboxyl functional solid grade acrylic resin that when reacted with a bis-phenol A epoxy displays all of the performance advantages associated with acrylic hybrid technology. These advantages over traditional polyester hybrid chemistry i...view more JONCRYL 821 is a carboxyl functional solid grade acrylic resin that when reacted with a bis-phenol A epoxy displays all of the performance advantages associated with acrylic hybrid technology. These advantages over traditional polyester hybrid chemistry include superior QUV stability, excellent chemical resistance, and excellent hardness while matching the flexibility of a polyester film. In addition, JONCRYL 821 epoxy hybrids produce excellent low gloss coatings that are frequently more economical than polyester or epoxy based low gloss systems. JONCRYL 821 was specifically designed for use in applications where appearance is critical. This is the first acrylic hybrid resin that matches the appearance of a polyester hybrid while maintaining the performance benefits described above. Additional benefits of JONCRYL 821 in acrylic hybrid formulations include optimized detergent resistance and better color stability compared to JONCRYL 819. view less Request Sample
D.E.H.™ 85 Univar Solutions D.E.H.™ 85 is a phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A. Request Sample
EPOTUF® 37-128 Polynt Composites EPOTUF® 37-128 is a 100% reactive Bis-A epoxy based resin diluted 35% by weight with phenol glycidyl ether C8 – C10.
Drocure™ 5130 D.R. Coats Ink & Resins Pvt. Ltd. Drocure™ 5130 is a versatile Lewis based catalyst for curing of Epoxy Resins. It is a technical grade of tris-(dimethylaminomethyl) phenol.
PHENODUR® PR 517/60B Allnex PHENODUR® PR 517 is a curable phenolic resin. Good flexibility and high sulphur resistance with EPOXY- and PE resins. Low free formaldehyde of < 0,5%. Request Sample
SiSiB® PC1200 SiSiB SILICONES SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy...view more SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants. view less
GP 2074 Univar Solutions GP 2074 is a phenolic novolac resin used as a curing agent for epoxy resins in molding compounds, copper clad laminates, coatings, and electrical applications. Request Sample
Epokukdo KDCP-200 Kukdo Chemical Co., Ltd. Epokukdo KDCP-200 is a multi-functional epoxy resin derived from poly-addition compound of dicyclopentadiene and phenol, and is designed for application of high performance epoxy molding compound(EMC) in semi-conductor and laminates. The strongest advanta...view more Epokukdo KDCP-200 is a multi-functional epoxy resin derived from poly-addition compound of dicyclopentadiene and phenol, and is designed for application of high performance epoxy molding compound(EMC) in semi-conductor and laminates. The strongest advantage in semi-conductor packaging using this product is much lower moisture absorption than previous generation epoxy resins, such as o-cresol novolac epoxy resin(YDCN type) or biphenyl type epoxy resin. This product can be substituted for YDCN and biphenyl type epoxy resin for preparing EMC with excellent performance in SMD. view less
Epokukdo YDB-400TE70 Kukdo Chemical Co., Ltd. Epokukdo YDB-400TE70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant.
Epokukdo YDB-400T60 Kukdo Chemical Co., Ltd. Epokukdo YDB-400T60 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant.
Epokukdo KDCP-150 Kukdo Chemical Co., Ltd. Epokukdo KDCP-150 is a multi-functional epoxy resin derived from poly-addition compound of dicyclopentadiene and phenol, and is designed for application of high performance epoxy molding compound(EMC) in semi-conductor and laminates. The strongest advanta...view more Epokukdo KDCP-150 is a multi-functional epoxy resin derived from poly-addition compound of dicyclopentadiene and phenol, and is designed for application of high performance epoxy molding compound(EMC) in semi-conductor and laminates. The strongest advantage in semi-conductor packaging using this product is much lower moisture absorption than previous generation epoxy resins, such as o-cresol novolac epoxy resin(YDCN type) or biphenyl type epoxy resin. This product can be substituted for YDCN and biphenyl type epoxy resin for preparing EMC with excellent performance in SMD. view less
Epokukdo KDCP-100 Kukdo Chemical Co., Ltd. Epokukdo KDCP-100 is a multi-functional epoxy resin derived from poly-addition compound of dicyclopentadiene and phenol, and is designed for application of high performance epoxy molding compound(EMC) in semi-conductor and laminates. The strongest advanta...view more Epokukdo KDCP-100 is a multi-functional epoxy resin derived from poly-addition compound of dicyclopentadiene and phenol, and is designed for application of high performance epoxy molding compound(EMC) in semi-conductor and laminates. The strongest advantage in semi-conductor packaging using this product is much lower moisture absorption than previous generation epoxy resins, such as o-cresol novolac epoxy resin(YDCN type) or biphenyl type epoxy resin. This product can be substituted for YDCN and biphenyl type epoxy resin for preparing EMC with excellent performance in SMD. view less
Epokukdo YDB-400H Kukdo Chemical Co., Ltd. Epokukdo YDB-400H is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant.
Epokukdo YDB-400T70 Kukdo Chemical Co., Ltd. Epokukdo YDB-400T70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly being applied to paper phenolic laminates as an additional flame retardant.
Telalit 1203 NF Spolchemie Telalit 1203 NF is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 1203 NF is primarily used in solvent-f...view more Telalit 1203 NF is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 1203 NF is primarily used in solvent-free epoxy systems and high-solid coatings with low yellowing. view less
IMICURE® Imidazole Curing Agent Evonik Operations GmbH, BL Crosslinkers IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...view more IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. view less Request Sample
Valtex 727 US Polymers - Accurez LLC Valtex 727 is a high quality pure phenolic tung oil varnish for applications in fortifying alkyds to provide excellent chemical resistance and grease resistance. This alkyd modifier is an air dry system and is composed of 2/3 phenolic and 1/3 tung oil. Du...view more Valtex 727 is a high quality pure phenolic tung oil varnish for applications in fortifying alkyds to provide excellent chemical resistance and grease resistance. This alkyd modifier is an air dry system and is composed of 2/3 phenolic and 1/3 tung oil. Due to its unique properties, Valtex 727 is a potential replacement for epoxy esters. view less Request Sample
Novares® LC 50 Rain Carbon Germany GmbH Novares® LC 50 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyureth...view more Novares® LC 50 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less
Novares® LC 55 Rain Carbon Germany GmbH Novares® LC 55 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyureth...view more Novares® LC 55 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less
Novares® LC 60 Rain Carbon Germany GmbH Novares® LC 60 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyuretha...view more Novares® LC 60 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a high polarity with an phenolic OH content of 5,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less
D.E.H.™ 82 Univar Solutions D.E.H.™ 82 is a high reactivity phenolic curing agent containing curing catalyst as well as a polyacrylate flow modifier. Can be formulated in low temperature applications in combination with D.E.R.™ 6615 solid epoxy resin. Request Sample
Epokukdo YDB-400 Kukdo Chemical Co., Ltd. Epokukdo YDB-400 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant.
Epotec® RD 104 Aditya Birla Epotec® RD 104 is a mono-functional, phenol-based glycidyl ether, primarily used for reducing the viscosity of conventional epoxy resins. This product is ideal for use in adhesives and casting, flooring, and construction applications.
Telalit 0903 Spolchemie Telalit 0903 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 0903 is primarily used for hardening epox...view more Telalit 0903 is a yellow-brown colored amine hardener for epoxy resin systems. This product is modified by cyclo-aliphatic amine and has a low molecular weight. This hardener does not contain nonyl-phenol. Telalit 0903 is primarily used for hardening epoxy systems for construction and composites and is designed to cure at room temperature. view less
Grilonit® H 81016 EMS-CHEMIE AG (PRIMID) Grilonit® H 81016 is a phenol free Mannichbase hardener formulated to provide fast and/or low temperature curing for wet and cold substrates. This product is used as a curing agent in liquid epoxy resins.
Novares® LC 65 Rain Carbon Germany GmbH Novares® LC 65 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a the highest polarity with an phenolic OH content of 6,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, po...view more Novares® LC 65 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a the highest polarity with an phenolic OH content of 6,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. For epoxy formulations this product can be used as curing accelerator. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less
Polifen 365 Benasedo Polifen 365 is a Water soluble Phenolic Resin to be combined with Epoxy resins for interior clear and pigmented enamels used in the Can Coating fields. It is suitable for food contact paints, according to FDA 21 CFR175.300.
Valtex 117 US Polymers - Accurez LLC Valtex 117 is a high quality pure phenolic tung oil varnish for fortifying alkyds to provide excellent chemical resistance and grease resistance. This alkyd modifier is an air dry system and is composed half phenolic and half tung oil. Valtex 117 can be u...view more Valtex 117 is a high quality pure phenolic tung oil varnish for fortifying alkyds to provide excellent chemical resistance and grease resistance. This alkyd modifier is an air dry system and is composed half phenolic and half tung oil. Valtex 117 can be used as the sole resin binder. Due to its unique properties, Valtex 117 is a potential replacement for epoxy esters. view less Request Sample
GP 7565 LF Univar Solutions GP 7565 LF is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to ma...view more GP 7565 LF is a low-color, heat-reactive phenolic resin solution in n-butanol used as a crosslinker for hydroxyl-containing polymers such as epoxies, polyesters, vinyls and acrylics. It can be emulsified into water-based epoxy resins and is designed to maximize chemical resistance. view less Request Sample
Ancamine® 2800 Evonik Operations GmbH, BL Crosslinkers Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulatio...view more Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulations. view less Request Sample
Ancamine® 2850 Evonik Operations GmbH, BL Crosslinkers Ancamine® 2850 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. Ancamine® 2850 is free of nonyl phenol and benzyl alcohol, facilitating in low volatile organic component ...view more Ancamine® 2850 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. Ancamine® 2850 is free of nonyl phenol and benzyl alcohol, facilitating in low volatile organic component coating and flooring formulations. view less Request Sample
Novares® TA 100 Rain Carbon Germany GmbH Novares® TA 100 is a hydrocarbon resin(SP 100 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promo...view more Novares® TA 100 is a hydrocarbon resin(SP 100 °C) containing phenolic OH groups.It is ideal to use in anticorrosive and marine paints based on epoxy and polyurethane to increase hydophobicity and chemical resistance. Additionaly it works as adhesion promotor on metals.Detailed information is available upon request. view less
Novares® LC 25 Rain Carbon Germany GmbH Novares® LC 25 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 25 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less
Novares® LC 40 Rain Carbon Germany GmbH Novares® LC 40 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 40 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less
Novares® LC 45 Rain Carbon Germany GmbH Novares® LC 45 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 45 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 4,0%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less
Novares® LC 15 Rain Carbon Germany GmbH Novares® LC 15 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a low polarity with an phenolic OH content of 1,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyuretha...view more Novares® LC 15 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a low polarity with an phenolic OH content of 1,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less
Novares® LC 20 Rain Carbon Germany GmbH Novares® LC 20 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyure...view more Novares® LC 20 is a liquid modifier with phenolic OH functionality. In the Novares LC series this product has a medium polarity with an phenolic OH content of 2,5%. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, and thermoplastic polyacrylics as plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. view less