| Resiflow® P-66F | Estron Chemical, Inc. | Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier....view more Resiflow® P-66F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-66F which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-66F shows a marked improvement in clarity in non-pigmented polyester-TGIC systems compared to classical flow control agents. view less | |
| Resiflow® L-66F | Estron Chemical, Inc. | Resiflow® L-66F is a high viscosity, carboxyl functional polyacrylate flow control agent. As with the other two carboxyl functional flow control agents in this group of specialty additives, Resiflow® L-64F and L-65F, the typical dosage of Resiflow® L-66F ...view more Resiflow® L-66F is a high viscosity, carboxyl functional polyacrylate flow control agent. As with the other two carboxyl functional flow control agents in this group of specialty additives, Resiflow® L-64F and L-65F, the typical dosage of Resiflow® L-66F is 0.2-1.5% based on binder solids. Resiflow® L-66F can be used in a variety of coating systems and provides exceptional clarity in clearcoat systems. view less | |
| ADDITOL® XL 123 N | Allnex | Additol® XL 123 N is a flow agent and defoamer based on a modified silicone oil, for air drying and stoving coatings systems. | Request Sample |
| XOANONS® WE-D5432 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5432 is a slip and anti-blocking additive. It is a polyether siloxane copolymer with excellent compatibility in varnish. It offers excellent substrate wetting ad slip in UV system, as well as flow promotion, anti-crater and defoaming effect. ...view more XOANONS® WE-D5432 is a slip and anti-blocking additive. It is a polyether siloxane copolymer with excellent compatibility in varnish. It offers excellent substrate wetting ad slip in UV system, as well as flow promotion, anti-crater and defoaming effect. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, which does not affect the quality of products. view less | |
| TEGO® Glide B 1484 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems wit...view more TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems with deaerating properties. It also has good orientation of matting agents. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies the dosage and incorporation of TEGO® Glide B 1484. view less | Request Sample |
| FB 500 | Eagle Specialty Products | FB 500 is a silicone-free defoamer in a translucent liquid form. This product is most commonly used to counteract the chronic foam problems associated with dip and flow coating applications in water-reducible, alkyd, and polyester coating systems. | |
| LA-460 | FTC Korea Co.,Ltd | LA-460 has excellent leveling agent properties as well as flow promotion. It has slip effects and anti-crater effects. It is suitable for use in PCM coatings, flooring coatings, and general industrial coatings. | Request Sample |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...view more BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. view less | |
| FB 100 | Eagle Specialty Products | FB 100 is a silicone modified hydrocarbon blend defoamer. This product provides rapid defoaming, improves flow, and improves leveling without causing film defects such as crawling, cratering, and fish eyes. FB 100 is most commonly used in solvent-based co...view more FB 100 is a silicone modified hydrocarbon blend defoamer. This product provides rapid defoaming, improves flow, and improves leveling without causing film defects such as crawling, cratering, and fish eyes. FB 100 is most commonly used in solvent-based coating system applications. view less | |
| XOANONS® WE-D5100 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5100 is a polyester siloxane copolymer slip and flow additive. It reduces friction coefficient and improves anti-scratch, slip and gloss. This product is suitable for high temperature baking system, good re-coat and do not influence adhesion ...view more XOANONS® WE-D5100 is a polyester siloxane copolymer slip and flow additive. It reduces friction coefficient and improves anti-scratch, slip and gloss. This product is suitable for high temperature baking system, good re-coat and do not influence adhesion of coating films. view less | |
| Amicure® CG-325G Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. | Request Sample |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...view more BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. view less | |
| Epotec® TH 983 | Aditya Birla | Epotec® TH 983 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator and flow modifier. This product is ideal for use in both decorative and protective powder coatings. | |
| DAPRO® DF 404 | Elementis | DAPRO® DF 404 can be used for many types of applications including roller coating, spraying, dipping and flow coating. DAPRO® DF 404 is particularly effective in pigmented acrylate / polyurethane / alkyd combinations, water reducible baking enamels and hy...view more DAPRO® DF 404 can be used for many types of applications including roller coating, spraying, dipping and flow coating. DAPRO® DF 404 is particularly effective in pigmented acrylate / polyurethane / alkyd combinations, water reducible baking enamels and hybrid systems. view less | Request Sample |
| HB-630 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-630 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good surface chemistry & thixotropic stability and improved homogeneity & free-flow characteristics. This product is d...view more HB-630 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good surface chemistry & thixotropic stability and improved homogeneity & free-flow characteristics. This product is designed for use in coatings, inks, and printing toners. view less | |
| SYLOID® LV-6 Matting Agent | Univar Solutions | SYLOID® LV-6 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: high solids/VOC Compliant coatings, coil coatings, general industrial coati...view more SYLOID® LV-6 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: high solids/VOC Compliant coatings, coil coatings, general industrial coatings and extrusion finishes. This product exhibits minimum viscosity impact and excellent flow and leveling at low VOC. view less | Request Sample |
| SYLOID® LV-6 Matting Agent | GRACE | SYLOID® LV-6 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: high solids/VOC Compliant coatings, coil coatings, general industrial coati...view more SYLOID® LV-6 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: high solids/VOC Compliant coatings, coil coatings, general industrial coatings and extrusion finishes. This product exhibits minimum viscosity impact and excellent flow and leveling at low VOC. view less | |
| KA-6088 | Keeneyes International Co., Ltd. | KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and ...view more KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and pinholes. view less | |
| D.E.H.™ 90 | Univar Solutions | D.E.H.™ 90 is a solid reaction product of liquid epoxy resin and polyphenols containing polyacrylate flow modifier and 2% curing accelerator. Designed for powder coating applications that require fast cure capability and low curing temperature, combined w...view more D.E.H.™ 90 is a solid reaction product of liquid epoxy resin and polyphenols containing polyacrylate flow modifier and 2% curing accelerator. Designed for powder coating applications that require fast cure capability and low curing temperature, combined with superior adhesion property to metal substrates. Fully compatible with other D.E.H.™ 80 series epoxy curing agents. view less | Request Sample |
| HDK® H2000 | Wacker Chemical Corporation | HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is used as a free flow additive in the production of technical powders and as additive in antifoam agents...view more HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is used as a free flow additive in the production of technical powders and as additive in antifoam agents. view less | Request Sample |
| XOANONS® WE-D5457 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5457 is a polyether siloxane copolymer with excellent compatibility in varnish. It provides a strong reduction of the surface tension, reduces the friction coefficient, improves anti-scratch and increase slip and anti-blocking. Paste may occur at low temperatures. It would become transparent and flow...view more XOANONS® WE-D5457 is a polyether siloxane copolymer with excellent compatibility in varnish. It provides a strong reduction of the surface tension, reduces the friction coefficient, improves anti-scratch and increase slip and anti-blocking. Paste may occur at low temperatures. It would become transparent and flow after heated, which does not affect the quality of products. view less | |
| Dynoadd® F-711 | Dynoadd by Dynea | Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F...view more Dynoadd® F-711 combines highly efficient foam control properties with improved compatibility resulting in improved flow and levelling properties. This combination makes it particularly effective in preventing and reducing the effects of popping.Dynoadd® F-711 is effective in polyester or alkyd-melamine, 2K-PU and 2K-Acrylic formulations. It has applications in automotive refinish coatings, coil coatings, and industrial coatings. view less | Request Sample |
| Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or...view more Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or spray; and also exhibits excellent performance in brush or roller applied wood coating systems. Drewplus™ S-4374 foam control agent is a 40 percent active emulsion of surface active agents and hydrophobes in water. view less | |
| PEL-SIL CL350 | Ele Corporation | PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a r...view more PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a resin and surface modifier. Other uses for PEL-SIL CL350 include surface tension reduction in silicone emulsions and improvement of drainage in pulp brownstock washing. view less | |
| Siltech® C-428 | Siltech Corp. | Siltech® C-428 is a 100% active polyether siloxane copolymer that is primarily used as a leveling additive with de-foaming properties. Siltech® C-428 is used in solvent-based ink and paint formulations as a leveling agent. It also helps to eliminate cratering and to improve slip, anti-blocking and flow...view more Siltech® C-428 is a 100% active polyether siloxane copolymer that is primarily used as a leveling additive with de-foaming properties. Siltech® C-428 is used in solvent-based ink and paint formulations as a leveling agent. It also helps to eliminate cratering and to improve slip, anti-blocking and flow. This product also provides better mar resistance. view less | |
| XOANONS® WE-D548 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D548 is a substrate wetting and anti-crater additive. It is composed of polyether siloxane copolymer. It effectively reduces surface tension, and provides excellent wetting and spreading ability, anti-cratering, re-coating, as well as flow. It...view more XOANONS® WE-D548 is a substrate wetting and anti-crater additive. It is composed of polyether siloxane copolymer. It effectively reduces surface tension, and provides excellent wetting and spreading ability, anti-cratering, re-coating, as well as flow. It may be frozen at lower temperatures, and will become transparent and increase flowability after heating or when diluted with a solvent. view less | |
| K-FLEX® 148 | King Industries, Inc. | K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosit...view more K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. view less | |
| Lanco™ Flow U | Lubrizol Advanced Materials, Inc. | Lanco™ Flow U is a flow and leveling agent that eliminates surface defects such as craters, pinholes and orange peel. Based on acrylic chemistry, Lanco™ Flow U is solvent-free and, therefore, is suitable for a wide range of applications. Typical applicati...view more Lanco™ Flow U is a flow and leveling agent that eliminates surface defects such as craters, pinholes and orange peel. Based on acrylic chemistry, Lanco™ Flow U is solvent-free and, therefore, is suitable for a wide range of applications. Typical applications for Lanco™ Flow U are coil coatings and can coatings. view less | |
| CRAYVALLAC® FLOW-200 | Arkema Rheology & Specialty Additives | CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film format...view more CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film formation. view less | Request Sample |
| XOANONS® WE-D5110 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5110 is a slip and flow additive. It is a polyester siloxane copolymer. It provides stronger surface tension reduction in solvent systems. This product offers excellent anti-cratering ability, reduces the friction coefficient, and improves an...view more XOANONS® WE-D5110 is a slip and flow additive. It is a polyester siloxane copolymer. It provides stronger surface tension reduction in solvent systems. This product offers excellent anti-cratering ability, reduces the friction coefficient, and improves anti-scratch, slip and gloss. It is suitable for high temperature baking systems, offers good re-coat, and does not influence adhesion of coating films. No foam-stability. Reduce the dosages of defoamers. view less | |
| Dynoadd® F-200 | Dynoadd by Dynea | Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes....view more Dynoadd® F-200 is a high molecular-weight acrylic polymer that effectively controls surface tension in solvent-based coating systems. F-200 is contributing to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. Dynoadd® F-200 improves air release and reduces foam formation. view less | Request Sample |
| ADDITOL® XW 390 | Allnex | Additol® XW 390 is a flow and wetting agent without silicone addition for waterborne coating systems. It prevents flow defects in all waterborne coating systems and promotes substrate wetting. | Request Sample |
| Luna-flow K F505 | DKSH | Luna-flow K F505 is a masterbatch of an acrylic polymer in carboxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 10% of thermoplastic acrylic polymer. | Request Sample |
| Luna-flow K F615 | DKSH | Luna-flow K F615 is a masterbatch of an acrylic polymer in hydroxylated saturated polyester. It is used as FCA, flow control agent in powder coatings. Active content: 15% of thermoplastic acrylic polymer. | Request Sample |
| TROYTHIX™ ANTISAG 4 | Arxada – Troy Corporation | TROYTHIX™ ANTISAG 4 is an anionic surfactant that is readily adsorbed onto particle surfaces, thus preventing agglomeration and settling. Because a gel structure is not formed (as with most anti-settling agents) particle suspension can be improved without...view more TROYTHIX™ ANTISAG 4 is an anionic surfactant that is readily adsorbed onto particle surfaces, thus preventing agglomeration and settling. Because a gel structure is not formed (as with most anti-settling agents) particle suspension can be improved without affecting viscosity. TROYTHIX™ ANTISAG 4 affects changes in flow by forming a micellar structure. The resulting decrease in mobility is observed as a reduction in sagging on vertical surfaces. view less | Request Sample |
| TEGO® Flow 370 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 370 is a silicone-free acrylic leveling agent and shows excellent compability and flow promotion with additional defoaming properties. It is highly recommended for solventborne coatings especially for clear coatings. | Request Sample |
| CRAYVALLAC® FLOW-100 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings...view more CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings and coatings in general e.g. solvent-based, high solids and solvent-free. view less | Request Sample |
| Dynoadd® F-201ND | Dynoadd by Dynea | Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow...view more Dynoadd® F-201ND is a solution of a polyester-modified acrylic polymer that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-201ND improves air release and reduces foam formation. Small additions contribute to improved flow, and a reduction in surface imperfections like craters, orange peel, and pinholes. view less | Request Sample |
| PEL-SIL CL360 | Ele Corporation | PEL-SIL CL360 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL CL360 is an excellent flow and leveling agent f...view more PEL-SIL CL360 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL CL360 is an excellent flow and leveling agent for solvent-based coatings and inks. It can also be used as a defoamer or anti-foaming agent for waterborne coatings systems. In polyurethane foam coatings, PEL-SIL CL360 acts as a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. view less | |
| TEGO® Flow 380 | Evonik Operations GmbH, BL Coating Additives | TEGO® Flow 380 is a silicone-free acrylic leveling agent and shows good compatibility and flow promotion with additional anti-popping properties. It is highly recommended for solvent-borne coatings, especially clear coatings. | Request Sample |
| XOANONS® WE-D5435 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5435 is a polyether siloxane copolymer. It provides a stronger reduction of the surface tension, reduces the friction coefficient, improves anti-scratch, and increases slip performance. It also offers good recoating and minimal influence on adhesion of coating films, as well as excellent ability of anti-cratering. This product is normally applied as anti-oil agent. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow...view more XOANONS® WE-D5435 is a polyether siloxane copolymer. It provides a stronger reduction of the surface tension, reduces the friction coefficient, improves anti-scratch, and increases slip performance. It also offers good recoating and minimal influence on adhesion of coating films, as well as excellent ability of anti-cratering. This product is normally applied as anti-oil agent. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, which does not affect the quality of products. view less | |
| Razeen® SR 5274 | Jubail Chemical Industries Co. | Razeen® SR 5274 is a solid flow agent master batch. This product is used to facilitate the incorporation of a liquid flow agent in powder coatings. Razeen® SR 5274 is designed for use in the formulation of powder coatings whose flow properties are require...view more Razeen® SR 5274 is a solid flow agent master batch. This product is used to facilitate the incorporation of a liquid flow agent in powder coatings. Razeen® SR 5274 is designed for use in the formulation of powder coatings whose flow properties are required to meet high demands. view less | |
| FCABA 2 | PCI Group, Inc. | FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and air...view more FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications. It is stable over a wide temperature range. view less | |
| AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be used as a free flow agent and rheology controller. It is well known in products like styling agents...view more AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be used as a free flow agent and rheology controller. It is well known in products like styling agents (dry water) and dry shampoos. Using AEROSIL® R 812 S is also recommended for sprays (e.g. antiperspirant) and powder-to-cream applications (e.g. lipsticks). Its INCI-name is 'Silica silylate' view less | Request Sample |
| SURFADOL 541DPM | DKSH | SURFADOL 541DPM is a versatile nonionic wetting agent and molecular defoamer designed for waterborne coatings, inks, and adhesive systems. It excels in dynamic wetting and defoaming, enhancing adhesion, flow, leveling, and minimizing defects like microfoa...view more SURFADOL 541DPM is a versatile nonionic wetting agent and molecular defoamer designed for waterborne coatings, inks, and adhesive systems. It excels in dynamic wetting and defoaming, enhancing adhesion, flow, leveling, and minimizing defects like microfoam. Unlike other surfactants, it avoids water and resistance issues, making it an effective choice for various applications. view less | Request Sample |
| XOANONS® WE-D5405R | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5405R is a polyether siloxane copolymer solution. It has good compatibility in varnish, provides a stronger reduction of the surface tension, and reduces the friction coefficient. This product also improves the scratch resistance, increases slip, and has good recoating and minimal influence on adhesion of coating films. It imparts excellent ability of anti-cratering. Normal application like anti-oil agent. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow...view more XOANONS® WE-D5405R is a polyether siloxane copolymer solution. It has good compatibility in varnish, provides a stronger reduction of the surface tension, and reduces the friction coefficient. This product also improves the scratch resistance, increases slip, and has good recoating and minimal influence on adhesion of coating films. It imparts excellent ability of anti-cratering. Normal application like anti-oil agent. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, which does not affect the quality of products. view less | |
| BYK®-018 | BYK | BYK®-018 is a mixture of hydrophobic solids and foam destroying polysiloxanes. It is especially suitable for pigmented emulsion systems based on styrene/ acrylate, acrylate or acrylate/polyurethane combinations with a low PVC. In industrial emulsion paints that are applied by dipping, flow...view more BYK®-018 is a mixture of hydrophobic solids and foam destroying polysiloxanes. It is especially suitable for pigmented emulsion systems based on styrene/ acrylate, acrylate or acrylate/polyurethane combinations with a low PVC. In industrial emulsion paints that are applied by dipping, flow coating, and airless spraying BYK-018 is very efficient against microfoam. view less | Request Sample |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...view more CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...view more CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...view more CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...view more CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| XOANONS® WE-D5512 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5512 is a polyether modified polydimethylsiloxane and leveling agent. It provides a strong reduction of the surface tension and reduces the friction coefficient. It improves scraping resistance and provides a smooth feeling. It also has good recoating and minimal influence on adhesion of coating films. This product is suitable for UV high speed printing ink and UV optical fiber coloring ink. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow...view more XOANONS® WE-D5512 is a polyether modified polydimethylsiloxane and leveling agent. It provides a strong reduction of the surface tension and reduces the friction coefficient. It improves scraping resistance and provides a smooth feeling. It also has good recoating and minimal influence on adhesion of coating films. This product is suitable for UV high speed printing ink and UV optical fiber coloring ink. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, but that does not affect the quality of products. view less | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...view more CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...view more CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...view more CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. view less | |
| TEGO® Twin 4000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Twin 4000 is a clear to slightly hazy liquid siloxane-based gemini surfactant. This product's properties are not affected by its haziness. It combines substrate wetting with good defoaming. It has very effective low foam and substrate wetting effects. It also has an anti-crater and flow...view more TEGO® Twin 4000 is a clear to slightly hazy liquid siloxane-based gemini surfactant. This product's properties are not affected by its haziness. It combines substrate wetting with good defoaming. It has very effective low foam and substrate wetting effects. It also has an anti-crater and flow promotion effect. view less | Request Sample |
| Dynoadd® F-707 | Dynoadd by Dynea | Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow...view more Dynoadd® F-707 is a non-silicone polymeric foam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-707 controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel. Dynoadd® F-707 has a good compatibility with many wax dispersions, giving good performance also in highly waxed coatings. Dynoadd® F-707 can also be used in combination with Dynoadd® flow additives. Dynoadd® F-707 has applications in coil coatings, PVdF, general industry, and packaging coatings. The additive is compatible with most solvent-borne and non-solvent radcure coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Chimatt® 900 | Double Bond Chemical Ind., Co., Ltd. | Chimatt® 900 is one of the most widely used matting agents for epoxy systems. It is a di-salt of a polycarbarboxylic acid and an imidazoline. Pure epoxy or epoxy/polyester systems formulated with Chimatt® 900 show a good matting effect down to the semi-gl...view more Chimatt® 900 is one of the most widely used matting agents for epoxy systems. It is a di-salt of a polycarbarboxylic acid and an imidazoline. Pure epoxy or epoxy/polyester systems formulated with Chimatt® 900 show a good matting effect down to the semi-gloss range (typically 20 - 100 %) and an excellent flow. Film color and physical properties can be partly controlled by pigments and fillers. This product is an off-white very fine powder. view less | |
| Dynoadd® F-708 | Dynoadd by Dynea | Dynoadd® F-708 is a non-silicone polymericfoam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-708 controls surface tension in solvent or non-solvent based coating systems. Small additions may also contribute to improved flow, and reduce surface imperfections such as craters and orange peel. Dynoadd® F-708 has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-708 can be used in combination with Dynoadd® flow...view more Dynoadd® F-708 is a non-silicone polymericfoam control additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. Dynoadd® F-708 controls surface tension in solvent or non-solvent based coating systems. Small additions may also contribute to improved flow, and reduce surface imperfections such as craters and orange peel. Dynoadd® F-708 has a good compatibility with many wax dispersions giving good performance also in highly waxed coatings. Dynoadd® F-708 can be used in combination with Dynoadd® flow additives, in particular Dynoadd® F-101. Dynoadd® F-708 has applications in coil coatings, general industry, packaging coatings, and PVdF coatings. A first trial dose of 0.05% is recommended. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Gasil® IJ624 | PQ Corporation | Gasil® IJ624 is a specialty silica gel used for anti-cake (free-flow) and carrying in food and pharmaceuticals. It gives benefits such as, carrier for flavors, fragrances, and active ingredients, is an anti-caking (free-flow) agent for food / pharmaceutic...view more Gasil® IJ624 is a specialty silica gel used for anti-cake (free-flow) and carrying in food and pharmaceuticals. It gives benefits such as, carrier for flavors, fragrances, and active ingredients, is an anti-caking (free-flow) agent for food / pharmaceutical materials with poor flow properties. view less | |
| Coadis™ 144 A | Arkema Rheology & Specialty Additives | Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized gloss potentien which providing ideal viscosity, flow...view more Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized gloss potentien which providing ideal viscosity, flow and wet adhesion from flat to high gloss systems. view less | Request Sample |
| Resiflow® P-65F | Estron Chemical, Inc. | Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier...view more Resiflow® P-65F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-65F, which has been converted into free-flowing powder by adsorption onto silica-type carrier. In addition to good flow and leveling, Resiflow® P-65F shows a marked improvement in clarity in non-pigmented hybrid and epoxy systems compared to a classical flow control agent, such as Resiflow® P-67. view less | |
| Valida S191C | Sappi Biotech | Valida S191C is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida is stable in a wide pH range (1-13) and towards high electrolytes concentration. In HI&I application, it functions as a rheology modifier and thixotropic agent, modifying the viscosity and effectively providing properties such as flow...view more Valida S191C is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida is stable in a wide pH range (1-13) and towards high electrolytes concentration. In HI&I application, it functions as a rheology modifier and thixotropic agent, modifying the viscosity and effectively providing properties such as flow control. The highly shear thinning profile makes Valida suitable for different processes, including spraying. view less | Request Sample |
| TEGO® Foamex 800 | Evonik Operations GmbH, BL Coating Additives | TEGO® FOAMEX 800 is a defoamer emulsion with good compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. A universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 800, is easily incorporated, especially for polyurethane formulations. It is highly suitable for dip coating, flow...view more TEGO® FOAMEX 800 is a defoamer emulsion with good compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer, containing fumed silica. A universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 800, is easily incorporated, especially for polyurethane formulations. It is highly suitable for dip coating, flow coating, and curtain coating as well as brush and roller applications. view less | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...view more Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. view less | Request Sample |
| BYK®-323 | BYK | BYK®-323 is an aralkyl modified polymethylalkylsiloxane. This product acts in a defoaming fashion (i.e., no or only slight foam stabilization), depending on the polarity of the paint system. It is heat resistant up to 250°C and does not decrease intercoat adhesion when overcoated. In wood and furniture coatings, BYK-323 is used to orient the flatting agent in flat topcoats and in multi-coat systems. Even in difficult to flat high-solids polyurethane, acid curing and unsaturated polyester coatings, the use of BYK-323 does not lead to shining up. In addition, optimal orientation of the flatting agent is achieved. In flow coat systems, BYK-323 provides a stable curtain. In industrial coatings, BYK-323 supports the orientation of flatting agents...view more BYK®-323 is an aralkyl modified polymethylalkylsiloxane. This product acts in a defoaming fashion (i.e., no or only slight foam stabilization), depending on the polarity of the paint system. It is heat resistant up to 250°C and does not decrease intercoat adhesion when overcoated. In wood and furniture coatings, BYK-323 is used to orient the flatting agent in flat topcoats and in multi-coat systems. Even in difficult to flat high-solids polyurethane, acid curing and unsaturated polyester coatings, the use of BYK-323 does not lead to shining up. In addition, optimal orientation of the flatting agent is achieved. In flow coat systems, BYK-323 provides a stable curtain. In industrial coatings, BYK-323 supports the orientation of flatting agents and aluminium flakes in metallics. view less | Request Sample |
| Gasil® GM2 | PQ Corporation | Gasil® GM2 is a silica gel specifically designed as a moisture scavenger / degassing agent for aluminum paints and as a free-flow agent in powder coatings. | |
| TEGO® Foamex 805 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 805 N defoamer emulsion with a broad application range, outstanding compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer. As a universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 805 N is easily incorporated especially for polyurethane formulations. It is well suited for post-addition, and for flexo/gravure printing and dip coating, flow...view more TEGO® Foamex 805 N defoamer emulsion with a broad application range, outstanding compatibility and easy incorporation. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer. As a universal let-down defoamer for low pigment content formulations and clear coats, TEGO® Foamex 805 N is easily incorporated especially for polyurethane formulations. It is well suited for post-addition, and for flexo/gravure printing and dip coating, flow coating, and curtain coating. view less | Request Sample |
| TEGO® Foamex 825 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 825 is an effective defoamer emulsion with high compatibility. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 825 has strong defoaming characteristics for clear coat, pigmented, and waterborne systems as well as for polyurethane-acrylate binders. It is highly suited for compressed air spraying and dip coating, flow...view more TEGO® Foamex 825 is an effective defoamer emulsion with high compatibility. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 825 has strong defoaming characteristics for clear coat, pigmented, and waterborne systems as well as for polyurethane-acrylate binders. It is highly suited for compressed air spraying and dip coating, flow coating, and curtain coating. It is also suitable for airless spraying, flooring, and brush.roller applications. view less | Request Sample |
| Raybo 62 HydroFlo | Raybo Chemical | Raybo 62 HydroFlo is a coating additive in a white liquid form. This product is most commonly used as a flow control agent in water-based and water-reducible coating system applications. | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...view more WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. view less | |
| TEGO® Foamex 843 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in pigmented low-viscosity systems. It is also suitable for pigmented and waterborne systems. TEGO® Foamex 843 is highly suitable for flexo/gravure printing. It is also suitable for airless spraying and for dip, flow...view more TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in pigmented low-viscosity systems. It is also suitable for pigmented and waterborne systems. TEGO® Foamex 843 is highly suitable for flexo/gravure printing. It is also suitable for airless spraying and for dip, flow, and curtain coating. view less | Request Sample |
| EFKA® FL 3740 EH | BASF Formulation Additives | EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. EFKA® FL 3740 is also ideally suited to be used in the manufacture of powder coatings or binders for powder coatings. For the preparation of a master batch, it is recommended to use a mixing of 9 parts of polyester resin with 1 part EFKA® FL 3740. This mixture is perfectly suited for direct application in the premix and extrusion process after melting, homogenization, cooling and granulation. The drawbacks of leveling agents...view more EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. EFKA® FL 3740 is also ideally suited to be used in the manufacture of powder coatings or binders for powder coatings. For the preparation of a master batch, it is recommended to use a mixing of 9 parts of polyester resin with 1 part EFKA® FL 3740. This mixture is perfectly suited for direct application in the premix and extrusion process after melting, homogenization, cooling and granulation. The drawbacks of leveling agents applied on SiO2 are avoided. In particular, pigmented and transparent powder coatings with excellent levelling properties are obtained for the production of weatherproof powder coatings. view less | |
| TEGO® Foamex 1488 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 1488 is a highly effective defoamer emulsion. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer containing fumed silica. TEGO® Foamex 1488 has very strong defoaming, with foam-inhibiting, characteristics. It is universally applicable for clear coat, pigmented, and waterborne systems. This product is highly suitable for dip coating, flow...view more TEGO® Foamex 1488 is a highly effective defoamer emulsion. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer containing fumed silica. TEGO® Foamex 1488 has very strong defoaming, with foam-inhibiting, characteristics. It is universally applicable for clear coat, pigmented, and waterborne systems. This product is highly suitable for dip coating, flow coating, curtain coating and flexo and gravure printing. It is also suitable for compressed air spraying and for brush and roller applications. view less | Request Sample |
| PAT-ADD FL 7 | Patcham USA | PAT-ADD FL 7 is a liquid flow agent solvent-borne systems, notably industrial coatings; this product is silicone and fluoro-free. The use of PAT-ADD FL 7 contributes to smooth films, improved appearance; free of imperfections like pinholes, orange peel or...view more PAT-ADD FL 7 is a liquid flow agent solvent-borne systems, notably industrial coatings; this product is silicone and fluoro-free. The use of PAT-ADD FL 7 contributes to smooth films, improved appearance; free of imperfections like pinholes, orange peel or craters. Main benefits are: highly effective flow and leveling agent, reduced risk of orange peel, craters, pin-holes and film waviness, enables the formation of smooth film surface with high distinctness of image (DOI), and high transparency in lacquers and clears. view less | Request Sample |
| K-PURE® CDR-3316 | King Industries, Inc. | K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations includ...view more K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations include cationic cured epoxies, aminoplast, siloxane and urethane based systems. It appears as a clear, light straw liquid and offers adhesion promotion and resistivity. This product is soluble in esters, alcohols, xylene, aromatic 100 & aromatic 150, ketones, and is insoluble in water. It can be applied in anti-reflective coatings, conformal coatings, and conductive & dielectric adhesives. view less | |
| TEGO® Foamex 830 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 830 is a silicone-free defoamer concentrate, highly compatible, ideally suitable for the grinding stage and pigment concentrates. It is a slightly hazy liquid organic polymer which contains fumed silica. TEGO® Foamex 830 is suitable for compressed air spraying and dip coating, flow...view more TEGO® Foamex 830 is a silicone-free defoamer concentrate, highly compatible, ideally suitable for the grinding stage and pigment concentrates. It is a slightly hazy liquid organic polymer which contains fumed silica. TEGO® Foamex 830 is suitable for compressed air spraying and dip coating, flow coating, and curtain coating. Addition of this product may be either in the grind or during the let-down procedure. The long-term effectiveness of the defoamer is dependent on the formulation and should be tested in the individual formulation. view less | Request Sample |
| AFCONA - 3037 | AFCONA Additives Sdn Bhd | AFCONA – 3037 is a blend of high-boiling aromatic ketone and ester solvents and a compatible polysiloxane. This clear liquid functions as an anti-blushing and leveling agent for thermoplastic systems, an anti- solvent popping agent for all baking paints, and as flow...view more AFCONA – 3037 is a blend of high-boiling aromatic ketone and ester solvents and a compatible polysiloxane. This clear liquid functions as an anti-blushing and leveling agent for thermoplastic systems, an anti- solvent popping agent for all baking paints, and as flow agent for solvent-based paints. AFCONA – 3037 finds application in solvent-based systems and paints. view less | |
| AFCONA - 3038 | AFCONA Additives Sdn Bhd | AFCONA – 3038 is a silicone-free blend of high-boiling aromatic ketone and ester solvent. This clear liquid functions as an anti-blushing and leveling agent for thermoplastic systems, an anti- solvent popping agent for all baking paints, and as flow agent...view more AFCONA – 3038 is a silicone-free blend of high-boiling aromatic ketone and ester solvent. This clear liquid functions as an anti-blushing and leveling agent for thermoplastic systems, an anti- solvent popping agent for all baking paints, and as flow agent for solvent-based paints. AFCONA – 3038 finds application in solvent-based systems and paints. view less | |
| ADDITOL® VXW 6396 | Allnex | ADDITOL® VXW 6396 is a flow and leveling agent for waterborne paint systems, without silicone addition. It's a fluorene modified acrylic resin copolymer, neutralized with amine, and improves leveling and substrate wetting. | Request Sample |
| TEGO® Foamex 822 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 822 is a defoamer emulsion with a broad application range, easy incorporation, and good long-term effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 822 has strong long-term defoaming. It is well suited for clearcoats, waterborne, and sensitive systems. It is highly suitable for brush/roller applications, compressed air spraying, and dip, flow...view more TEGO® Foamex 822 is a defoamer emulsion with a broad application range, easy incorporation, and good long-term effectiveness. It is a white, thixotropic liquid emulsion of a polyether siloxane copolymer which contains fumed silica. TEGO® Foamex 822 has strong long-term defoaming. It is well suited for clearcoats, waterborne, and sensitive systems. It is highly suitable for brush/roller applications, compressed air spraying, and dip, flow, and curtain coating. It is also suitable for airless spraying and flexo/gravure printing. view less | Request Sample |
| WorléeAdd 603 | Worlée-Chemie G.m.b.H. | WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition improves normal substrate wetting as well as flow...view more WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition improves normal substrate wetting as well as flow at the same time. The active ingredients correspond to FDA-§ 175.300. Application fields are can coatings, airdrying industrial coatings, wood and furniture coatings, solvent free UV-systems as well as EP-coatings. view less | |
| Resiflow® PL-200B | Estron Chemical, Inc. | Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performa...view more Resiflow® PL-200B is a standard type flow control agent which can impart excellent re-coatability and intercoat adhesion properties in addition to good flow and leveling. Resiflow® PL-200B is widely used and known for its suitability and reliable performance across the spectrum of typical binder chemistries including Polyester-TGIC, Polyester-HAA, Hybrids and Epoxies. view less | |
| PAT-ADD SU 440 | Patcham USA | PAT-ADD SU 440 is a nonionic surface active agent for excellent wetting and dispersing in aqueous systems with minimum foam. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. Its main applications are in WB industrial paints, inks and adhesives. Main benefits are: excellent pigment wetting properties, does not contribute to foam formation, strong reduction of surface tension in aqueous systems, lower water solubility,low use levels, and improved flow...view more PAT-ADD SU 440 is a nonionic surface active agent for excellent wetting and dispersing in aqueous systems with minimum foam. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. Its main applications are in WB industrial paints, inks and adhesives. Main benefits are: excellent pigment wetting properties, does not contribute to foam formation, strong reduction of surface tension in aqueous systems, lower water solubility,low use levels, and improved flow and leveling. view less | Request Sample |
| Dynoadd® F-800 | Dynoadd by Dynea | Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...view more Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. view less | Request Sample |
| PEL-SIL CL400 | Ele Corporation | PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems throug...view more PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems through its two primary hydroxyls in polyurethane systems. view less | |
| Resiflow® PV-88 | Estron Chemical, Inc. | Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Re...view more Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow ® PV-88 is well suited for a spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| TEGO® Wet 500 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 500 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid non-ionic organic surfactant ideal for spray application. It is universally applicable, silicone-free, and has low foam. It is suitable for clear...view more TEGO® Wet 500 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid non-ionic organic surfactant ideal for spray application. It is universally applicable, silicone-free, and has low foam. It is suitable for clear coat, pigmented, radiation-curing, and waterborne systems. TEGO® Wet 500's addition to the coating can be as supplied or as a predilution. It is suitable for for addition during the let-down stage, but is recommended during the grind stage for pigmented formulations. view less | Request Sample |
| EFKA® FL 3770 | BASF Formulation Additives | EFKA® FL 3770 is highly compatible with most solvent-based resins to act as an effective leveling agent, anti-cratering agent, and flow control agent with minimized effect on stabilizing foam. It is based on a fluoro-modified polyacrylate technology that ...view more EFKA® FL 3770 is highly compatible with most solvent-based resins to act as an effective leveling agent, anti-cratering agent, and flow control agent with minimized effect on stabilizing foam. It is based on a fluoro-modified polyacrylate technology that makes it excellent for most solvent-based industrial and wood coatings to improve the leveling of the dry film with no negative impact on recoatability. view less | |
| POLYFOX™ PF-2002 | Synthomer | POLYFOX™ PF-2002 is an anionic fluorinated (C2F5) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-2002 wetting, flow and leveling agent is designed for US DfE compliant floor finish applications. | |
| POLYFOX™ PF-2003 | Synthomer | POLYFOX™ PF-2003 is an anionic fluorinated (CF3) polyether diammonium disulfate for aqueous formulations. POLYFOX™ PF-2003 wetting, flow and leveling agent is designed for US DfE compliant floor finish applications. | |
| COATOSIL* 3509 COATINGS ADDITIVE | Momentive | CoatOSil* 3509 coatings additive is a reactive 100% active slip agent that may help improve abrasion and mar resistance in UV and E Beam cured acrylate resins. Additional benefits include enhanced flow and leveling, substrate wetting and gloss retention. | |
| SYLOID® C 809 Matting Agent | Univar Solutions | SYLOID® C 809 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: coil coatings, general industrial coatings and extrusion finishes. | Request Sample |
| SYLOID® C 809 Matting Agent | GRACE | SYLOID® C 809 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. It is a high efficiency, matting or gloss control agent designed for use in: coil coatings, general industrial coatings and extrusion finishes. | |
| POLYFOX™ PF-154N | Synthomer | POLYFOX™ PF-154N is a 25 % active Nonionic fluorinated (C2F5) polyether ethoxylated. POLYFOX™ PF-154N wetting, flow and leveling agent is suitable for use in a wide variety of aqueous coating, ink, and electronics applications. | |
| SYLOID® 221 Matting Agent | Univar Solutions | SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion fi...view more SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion finishes. view less | Request Sample |
| SYLOID® 221 Matting Agent | GRACE | SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion fi...view more SYLOID® 221 Matting Agent is an amorphous synthetic silica appearing as a white, free-flowing powder. This silica product is a high efficiency, matting, or gloss control agent designed for use in coil coatings, general industrial coatings and extrusion finishes. view less | |
| Resiflow® PV-60 | Estron Chemical, Inc. | Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such...view more Resiflow®PV-60 is a general purpose flow control agent for general industrial powder coatings. The material is based on a liquid acrylic polymer that has been converted into a free flowing powder by adsorption onto silica-type filler. Surface defects such as orange peel, craters, pinholes, and other imperfections can be reduced or eliminated by incorporating 1-2% of Resiflow® PV-60 into powder coating formulations. view less | |
| PAT-ADD SU 420 | Patcham USA | PAT-ADD SU 420 is a nonionic surface active additive that provides excellent wetting and dispersing in aqueous systems. Pat-Add SU 420 also acts as a defoamer. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. PAT-ADD SU 420 is an easy to use, solvent-free liquid. Main benefits are: easy workability, excellent pigment wetting properties, does not contribute to foam stabilization, strong reduction of surface tension in aqueous systems, lower water solubility, and aids flow...view more PAT-ADD SU 420 is a nonionic surface active additive that provides excellent wetting and dispersing in aqueous systems. Pat-Add SU 420 also acts as a defoamer. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. PAT-ADD SU 420 is an easy to use, solvent-free liquid. Main benefits are: easy workability, excellent pigment wetting properties, does not contribute to foam stabilization, strong reduction of surface tension in aqueous systems, lower water solubility, and aids flow and leveling. view less | Request Sample |
| ADDITOL® VXW 6503 N | Allnex | ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling wi...view more ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling without foam stabilisation. view less | Request Sample |
| Resiflow® PH-241 | Estron Chemical, Inc. | Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries includi...view more Resiflow® PH-241 is a reactive flow control agent that can improve edge coverage and minimize picture framing, as measured by decrease in pill flow. This product is typically used from 0.75-2% and is suitable for essentially all binder chemistries including polyesters, hybrids and epoxy based formulations. During the cure cycle, Resiflow® PH-241 can react with the binder system of the powder coating and also crosslink with itself. view less | |
| KBM-602 | Shin-Etsu Silicones of America | KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics, epoxies, phenolics, melamines, polyurethanes, polycarbonates, polyesters, nylons, polystyrenes, PVC, PET, PBT, ABS, and silicones. KBM-602 is most often used to improve strength, flexibility, and adhesion due to its ability to create exceptionally strong interactions between inorganic and organic components of a given system. Additional advantages may include improved processing (improvements in viscosity and other flow...view more KBM-602 silane, N-(2-aminoethyl)-3-aminopropyl-methyldimethoxysilane), is a diamino-functional silane with applications in a wide variety of different advanced coatings, adhesives, sealants, composites, elastomers, and thermoplastics that include acrylics, epoxies, phenolics, melamines, polyurethanes, polycarbonates, polyesters, nylons, polystyrenes, PVC, PET, PBT, ABS, and silicones. KBM-602 is most often used to improve strength, flexibility, and adhesion due to its ability to create exceptionally strong interactions between inorganic and organic components of a given system. Additional advantages may include improved processing (improvements in viscosity and other flow characteristics, improved compatibility of composite components and reduced energy consumption, better filler dispersion, the ability to increase the ratio of filler to resin, and improved resistance to chemicals and moisture. view less | |
| Milestat 129-V | MPI Chemie B.V. | Milestat 129-V is a glycerol mono stearate in the form of white free flowing powder. It is used as an antistatic agent and makes the surface or material itself slightly conductive. |
