| XOANONS® WE-D5512 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5512 is a polyether modified polydimethylsiloxane and leveling agent. It provides a strong reduction of the surface tension and reduces the friction coefficient. It improves scraping resistance and provides a smooth feeling. It also has good recoating and minimal influence on adhesion of coating films. This product is suitable for UV high speed printing ink and UV optical fiber coloring ink. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow...view more XOANONS® WE-D5512 is a polyether modified polydimethylsiloxane and leveling agent. It provides a strong reduction of the surface tension and reduces the friction coefficient. It improves scraping resistance and provides a smooth feeling. It also has good recoating and minimal influence on adhesion of coating films. This product is suitable for UV high speed printing ink and UV optical fiber coloring ink. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, but that does not affect the quality of products. view less | |
| EFKA® FL 3785 | BASF Formulation Additives | EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL ...view more EFKA® FL 3785 is a modified polyacylate leveling agent for solvent-based systems without fluor or silicon modifications. It improves leveling, prevents cratering, significantly improves de-aeration and does not interfere with intercoat adhesion. EFKA® FL 3785 is especially suitable for coil coatings, two-pack epoxy or polyurethane coatings, baking enamels and gelcoats. For enhanced performance in coil and two-pack coatings, EFKA® FL 3785 can be combined with EFKA® FL 3600. Compared to fluorocarbon-modified acrylates or silicone leveling additives, EFKA® FL 3785 has less influence on surface tension and more effect on de-aeration. view less | |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...view more Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. view less | Request Sample |
| POLARGEL® CA | American Colloid Company | POLARGEL® CA is a micronized white calcium bentonite that is selectively mined and supplied as a free-flowing powder. This specialty clay product is used in applications requiring light color, high solid levels and low viscosity. It is often used as a bin...view more POLARGEL® CA is a micronized white calcium bentonite that is selectively mined and supplied as a free-flowing powder. This specialty clay product is used in applications requiring light color, high solid levels and low viscosity. It is often used as a binder and plasticizer to ease extrusion and increase green strength with minimal viscosity increase. view less | |
| HL-150 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants...view more HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. view less | |
| BYK®-3933 P | BYK | BYK®-3933 P is a modified polyacrylate, adsorbed on silicon dioxide. BYK-3933 P is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. Contrary to the standard leveling additives, BYK-3933 P has a multifunct...view more BYK®-3933 P is a modified polyacrylate, adsorbed on silicon dioxide. BYK-3933 P is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. Contrary to the standard leveling additives, BYK-3933 P has a multifunctional performance profile. view less | Request Sample |
| Celopro® MK20M FP | Celotech Chemical Co., Ltd. | Celopro® MK20M FP is a non modified medium high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® ...view more Celopro® MK20M FP is a non modified medium high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. view less | |
| Synteven 728 AE | Galstaff Multiresine S.p.A. | Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven ...view more Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven 728 AE is used to formulate of clear and pigmented, wax-free coatings for wood and furniture, high gloss to matt, with good fast films drying. view less | |
| Pangel S9 | Tolsa SA | Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatin...view more Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatings, water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants and mastics, and additives for cement and gypsum systems. view less | |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...view more Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. view less | Request Sample |
| XOANONS® WE-D887R | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D887R is a fluorocarbon modified polyacrylate copolymer solution. It offers excellent defoaming and foam-inhibition. This product provides long-wave leveling and prevent anti-orange-peel. Most of the applications are for coil and roll coating ...view more XOANONS® WE-D887R is a fluorocarbon modified polyacrylate copolymer solution. It offers excellent defoaming and foam-inhibition. This product provides long-wave leveling and prevent anti-orange-peel. Most of the applications are for coil and roll coating and epoxy floor paints. Not suitable for varnish and UV cure coating. view less | |
| HB-612 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use i...view more HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. view less | |
| WorléeSol NW 410 | Worlée-Chemie G.m.b.H. | WorléeSol NW 410 is a solvent-free, medium oil, special modified alkyd emulsion. It is used for water thinnable decorative and d.i.y. paints with good brushability, flow and filling properties. It is especially recommended for high gloss top coats. The fo...view more WorléeSol NW 410 is a solvent-free, medium oil, special modified alkyd emulsion. It is used for water thinnable decorative and d.i.y. paints with good brushability, flow and filling properties. It is especially recommended for high gloss top coats. The formulation of wood protection stains is also possible. The use of W´Sol NW 410 during the grinding process is not recommended. This grade has a non volatile content of 46% ± 2. view less | |
| WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...view more WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| WorléeThix V 727 (50%-54% White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% White Spirit 180-210) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compat...view more WorléeThix V 727 (50%-54% White Spirit 180-210) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| EBECRYL® LEO 10601 | Allnex | EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also be used to produce UV flexo inks with good flow...view more EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. It exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink- water balance and low misting. It may also be used to produce UV flexo inks with good flow, high gloss and high reactivity. It is also suitable for screen and gravure application and OPV. view less | Request Sample |
| Epoxy Acrylate SE 1702 | Soltech Ltd | Epoxy Acrylate SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide flow, leveling, pigment wetting, solvent resistance, water resistance, and high gloss. This product is commonly used in app...view more Epoxy Acrylate SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid that is designed to provide flow, leveling, pigment wetting, solvent resistance, water resistance, and high gloss. This product is commonly used in applications such as paper coatings, overprint varnishes, screen inks, and lithographic inks. Epoxy Acrylate SE 1702 is 100% polymer solid by weight with a viscosity of 4,000-6,000 at 60℃. view less | |
| Gasil® 23FP | PQ Corporation | Gasil® 23FP is a general purpose silica gel used for thickening, carrying, and anti-caking (free-flow) in food and pharmaceuticals. Gasil® 23FP silicon dioxide complies with current FCC (Food Chemicals Codex) and USP (US Pharmacopeia) standards and is acc...view more Gasil® 23FP is a general purpose silica gel used for thickening, carrying, and anti-caking (free-flow) in food and pharmaceuticals. Gasil® 23FP silicon dioxide complies with current FCC (Food Chemicals Codex) and USP (US Pharmacopeia) standards and is acceptable for use as a food additive in with 21CFR172.480. view less | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...view more HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. view less | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...view more HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. view less | |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...view more HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. view less | |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | Request Sample |
| HDK® H2000 | Wacker Chemical Corporation | HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is used as a free flow...view more HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is used as a free flow additive in the production of technical powders and as additive in antifoam agents. view less | Request Sample |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...view more HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. view less | |
| Suspeno 70 | Poly-Resyn, Inc. | Suspeno 70 is a brownish yellow liquid flow control agent for use in the manufacture stage or as a stir-in post additive to finished products. This product provides sag prevention, running, dripping and curtaining of paints, or slumping in heavy bodied co...view more Suspeno 70 is a brownish yellow liquid flow control agent for use in the manufacture stage or as a stir-in post additive to finished products. This product provides sag prevention, running, dripping and curtaining of paints, or slumping in heavy bodied compounds. Suspeno 70 has no effect on gloss, color, dry or cure time and flexibility. Suspeno 70 is primarily used as an additive in coatings, inks, adhesives, caulks and sealants. view less | |
| Indopol® H-8 | INEOS Oligomers USA LLC | Indopol® H-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more Indopol® H-8 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| LAPONITE® S482 | BYK | LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flow...view more LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. view less | Request Sample |
| WorléeKyd B 845 55% In White Spirit 145-195 | Worlée-Chemie G.m.b.H. | WorléeKyd B 845 55% In White Spirit 145-195 is a medium oil, very fast drying alkyd resin for the production of high quality air and heat drying industrial enamels and car repair enamels. W´Kyd B 845 is compatible with the usual maleic and phenolic modified resins. This product is also used for radiator, dipping and flow...view more WorléeKyd B 845 55% In White Spirit 145-195 is a medium oil, very fast drying alkyd resin for the production of high quality air and heat drying industrial enamels and car repair enamels. W´Kyd B 845 is compatible with the usual maleic and phenolic modified resins. This product is also used for radiator, dipping and flow coating paints and enamels for trucks touring cars, omnibuses, tractors and agricultural equipment. view less | |
| WorléeKyd S 351 NV NV | Worlée-Chemie G.m.b.H. | WorléeKyd S 351 NV NV is a medium oil length, with soya oil modified airdrying alkyd resin particularly for the manufacture of fillers with structural viscosity for brushing, primer surfacers and semi-gloss and flat wall paints. This grade has a non volatile content of 60% ± 1. Also, at high p.v.c. good film flow...view more WorléeKyd S 351 NV NV is a medium oil length, with soya oil modified airdrying alkyd resin particularly for the manufacture of fillers with structural viscosity for brushing, primer surfacers and semi-gloss and flat wall paints. This grade has a non volatile content of 60% ± 1. Also, at high p.v.c. good film flow is obtained. Although the drying is quick, the film remains open long enough for painting large surfaces. view less | |
| PEL-SIL™ CX740 | Ele Corporation | PEL-SIL™ CX740 is an epoxy functionalized siloxane polyether. With its silicone and organic combination and dual reactive hydroxy and epoxy functionality, PEL-SIL™ CX740 offers unique capability to modify epoxy and polyurethane systems. It can impart surface and bulk properties, such as gloss, slip, hydrophobicity, and mechanical. Due to its low viscosity, PEL-SIL™ CX740 enhances the process for better mixing and flow...view more PEL-SIL™ CX740 is an epoxy functionalized siloxane polyether. With its silicone and organic combination and dual reactive hydroxy and epoxy functionality, PEL-SIL™ CX740 offers unique capability to modify epoxy and polyurethane systems. It can impart surface and bulk properties, such as gloss, slip, hydrophobicity, and mechanical. Due to its low viscosity, PEL-SIL™ CX740 enhances the process for better mixing and flow for compounds and composites. view less | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...view more HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. view less | |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | Request Sample |
| SARBIO® 7106 Resin | Sartomer Americas | SARBIO® 7106 Resin is an acrylated vegetable oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks. It exhibits good impact strength and water ...view more SARBIO® 7106 Resin is an acrylated vegetable oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks. It exhibits good impact strength and water resistance. view less | |
| SAFA 302 | PCI Group, Inc. | SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coeffic...view more SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coefficient of friction. It is compatible with most types of solvent and water systems, including emulsions. view less | |
| RHEOBYK-411 | BYK | RHEOBYK-411 is a liquid rheology additive for low-polarity solvent-borne and solvent-free coating systems to improve anti-sagging and anti-settling properties. The additive causes highly thixotropic flow behavior; post-addition is possible. It is recommen...view more RHEOBYK-411 is a liquid rheology additive for low-polarity solvent-borne and solvent-free coating systems to improve anti-sagging and anti-settling properties. The additive causes highly thixotropic flow behavior; post-addition is possible. It is recommended for low-polarity systems. view less | Request Sample |
| TAMOL™ 681 | Univar Solutions | TAMOL™ 681 is a high-performance ammonium salt of a hydrophobic copolymer dispersant at 35% solids, formaldhyde-free, which can be used for a variety of applications, including interior and exterior latex paints and flooring adhesive formulations. Benefits include: compatibility and stability with fillers, ZnO and other reactive pigments, improved flow and film-build when used with nonionic rheology modifier...view more TAMOL™ 681 is a high-performance ammonium salt of a hydrophobic copolymer dispersant at 35% solids, formaldhyde-free, which can be used for a variety of applications, including interior and exterior latex paints and flooring adhesive formulations. Benefits include: compatibility and stability with fillers, ZnO and other reactive pigments, improved flow and film-build when used with nonionic rheology modifiers, maximum gloss potential, excellent water resistance and improved corrosion resistance. view less | Request Sample |
| BRB Siloen® WA 264 | BRB International BV | BRB Siloen® WA 264 is a polyether-modified siloxane. It is a silicone surfactant for aqueous coatings with excellent wetting and levelling properties. | |
| Indopol® H-7 | INEOS Oligomers USA LLC | Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® H-7 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-15 | INEOS Oligomers USA LLC | Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® H-15 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-25 | INEOS Oligomers USA LLC | Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® H-25 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® H-50 | INEOS Oligomers USA LLC | Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® H-50 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® L-6 | INEOS Oligomers USA LLC | Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, i...view more Indopol® L-6 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| Indopol® L-14 | INEOS Oligomers USA LLC | Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, ...view more Indopol® L-14 is a uniquely versatile liquid polybutene polymer. Indopol polybutenes (polyisobutene, PB, PIB) are available in a wide range of viscosity grades. This grade is a free-flowing liquid. All grades are clear/colorless, hydrophobic, non-drying, inherently tacky and compatible with a wide range of organic materials. view less | |
| RHEOBYK-420 | BYK | RHEOBYK-420 is a liquid rheology additive for aqueous and water-reducible coating systems for improving anti-sagging and anti-settling properties. The additive is also especially suited for manufacturing aqueous pigment concentrates. RHEOBYK-420 causes thixotropic flow...view more RHEOBYK-420 is a liquid rheology additive for aqueous and water-reducible coating systems for improving anti-sagging and anti-settling properties. The additive is also especially suited for manufacturing aqueous pigment concentrates. RHEOBYK-420 causes thixotropic flow behavior; post-addition is possible. view less | Request Sample |
| HDK® T40 | Wacker Chemical Corporation | HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickenin...view more HDK® T40 is white colloidal powder of high purity and is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is used as a free flow additive in the production of powder substances and food stuff. HDK® T40 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. view less | Request Sample |
| HDK® H15 | Wacker Chemical Corporation | HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the ...view more HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the production of technical powders. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. view less | Request Sample |
| ADDITOL® XL 480 | Allnex | Additol® XL 480 is a leveling agent without addition of silicone, amine resin modified acrylic copolymer. It may be used with any type of paint material, e.g. on the basis of alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc...view more Additol® XL 480 is a leveling agent without addition of silicone, amine resin modified acrylic copolymer. It may be used with any type of paint material, e.g. on the basis of alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc. It also prevents surface defects of paint films. view less | Request Sample |
| BENTOBRITE® KB-325 | American Colloid Company | BENTOBRITE® KB-325 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This pure, high-brightness clay is used in applications that require good color and moderate thixotropy. This product can be used ...view more BENTOBRITE® KB-325 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This pure, high-brightness clay is used in applications that require good color and moderate thixotropy. This product can be used as a suspending agent, gellant, and binder for use in household products, automotive products and paints, aerosols, enamels and other industrial specialty applications where high solid levels and low viscosity are desired. view less | |
| XOANONS® WE-D885R | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D885R is a polyacrylate modified copolymer solution. It exhibits good performance of foam-inhibition and anti-foaming. This product also has excellent long-wave leveling and anti-orange-peel benefits. It is not suitable for varnish and UV cure...view more XOANONS® WE-D885R is a polyacrylate modified copolymer solution. It exhibits good performance of foam-inhibition and anti-foaming. This product also has excellent long-wave leveling and anti-orange-peel benefits. It is not suitable for varnish and UV cure systems. view less | |
| WorléeAdd 603 | Worlée-Chemie G.m.b.H. | WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition improves normal substrate wetting as well as flow...view more WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition improves normal substrate wetting as well as flow at the same time. The active ingredients correspond to FDA-§ 175.300. Application fields are can coatings, airdrying industrial coatings, wood and furniture coatings, solvent free UV-systems as well as EP-coatings. view less | |
| WorléeKyd SC 965 (68.5 % - 71.5% Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd SC 965 (68.5 % - 71.5% Dearomatized HC 180-220) is a long oil alkyd resin used for high quality decorative and building paints. This grade have a non volatile content of 70% ± 1.5. It is compatible with the most medium and long oil airdrying alkyd resins. W´Kyd SC 965 is also compatible with conventional maleic and phenolic modified hard resins. This product exhibits good properties of brushability, flow...view more WorléeKyd SC 965 (68.5 % - 71.5% Dearomatized HC 180-220) is a long oil alkyd resin used for high quality decorative and building paints. This grade have a non volatile content of 70% ± 1.5. It is compatible with the most medium and long oil airdrying alkyd resins. W´Kyd SC 965 is also compatible with conventional maleic and phenolic modified hard resins. This product exhibits good properties of brushability, flow, film build and high gloss. view less | |
| WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...view more WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 decreases sagging from vertical surfaces. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| EBECRYL® 3702 | Allnex | EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved w...view more EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance. It is recommended for use in: clear coatings for paper, overprint varnishes, lithographic ink vehicles, vehicles for metal decorating inks and clear coatings, screen ink vehicles, and coatings for rigid and flexible plastics. view less | Request Sample |
| WorléeKyd SC 965 | Worlée-Chemie G.m.b.H. | WorléeKyd SC 965 is a long oil alkyd resin produced from special fatty acids and used for high quality decorative and building paints. It is compatible with the most medium and long oil airdrying alkyd resins. This product is also compatible with conventional maleic and phenolic modified hard resins. W´Kyd SC 965 is especially suitable for the production of high quality decorative and building paints, which stand out for their very good properties as brushability, flow...view more WorléeKyd SC 965 is a long oil alkyd resin produced from special fatty acids and used for high quality decorative and building paints. It is compatible with the most medium and long oil airdrying alkyd resins. This product is also compatible with conventional maleic and phenolic modified hard resins. W´Kyd SC 965 is especially suitable for the production of high quality decorative and building paints, which stand out for their very good properties as brushability, flow, film build and high gloss. view less | |
| HDK® N20 | Wacker Chemical Corporation | HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is app...view more HDK® N20 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It acts as a free flow additive in the production of technical powders and can be used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. view less | Request Sample |
| RHEOVIS® HS 1152 | BASF Formulation Additives | RHEOVIS® HS 1152 is a derivative of a family of highly effective rheological control additives for water-borne coating systems. It is based on acrylic polymer technology with side groups designed to provide an associate thickening mechanism. RHEOVIS® HS 1152 is the most efficient thickening additive leading to a more pseudoplastic system, for example spray applications. The practical use in conventional coatings might be limited to applications where flow...view more RHEOVIS® HS 1152 is a derivative of a family of highly effective rheological control additives for water-borne coating systems. It is based on acrylic polymer technology with side groups designed to provide an associate thickening mechanism. RHEOVIS® HS 1152 is the most efficient thickening additive leading to a more pseudoplastic system, for example spray applications. The practical use in conventional coatings might be limited to applications where flow and leveling are less critical. view less | |
| AFCONA - 3570 | AFCONA Additives Sdn Bhd | AFCONA – 3570 is a pre-neutralized fluorocarbon modified polyacrylic in water. This clear to slightly yellow liquid functions as a leveling and anti-crater agent, foam stabilizer, and substrate wetting additive with no intercoat adhesion. AFCONA – 3570 fi...view more AFCONA – 3570 is a pre-neutralized fluorocarbon modified polyacrylic in water. This clear to slightly yellow liquid functions as a leveling and anti-crater agent, foam stabilizer, and substrate wetting additive with no intercoat adhesion. AFCONA – 3570 finds application in water-based paints and coatings. view less | |
| Powdermate® 486CFL | Arxada – Troy Corporation | Powdermate® 486CFL enhances the flow and leveling of a powder coating. It resists cratering, orange peel, and hazing, thereby providing a superior surface appearance. In addition, this product provides excellent adhesion to bare metal substrates. These hi...view more Powdermate® 486CFL enhances the flow and leveling of a powder coating. It resists cratering, orange peel, and hazing, thereby providing a superior surface appearance. In addition, this product provides excellent adhesion to bare metal substrates. These high-performance properties make Powdermate® 486CFL particularly suitable for all types of coatings. This additive is effective in both thermal and UV cured systems and is compatible with acrylic, epoxy, and polyester resins. view less | Request Sample |
| HDK® H30 | Wacker Chemical Corporation | HDK® H30 is a white colloidal powder of high purity and is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts as a free flow additive in the ...view more HDK® H30 is a white colloidal powder of high purity and is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H30 acts as a free flow additive in the production of powder coatings and can be applied in automotive refinishes, coatings, flexographic printing, metal coatings, printing inks and reinforcement of mechanical properties. view less | Request Sample |
| Celopro® CS180 | Celotech Chemical Co., Ltd. | Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...view more Celopro® CS180 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. view less | |
| Celopro® CS170 | Celotech Chemical Co., Ltd. | Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...view more Celopro® CS170 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. view less | |
| Celopro® CS160 | Celotech Chemical Co., Ltd. | Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. Th...view more Celopro® CS160 is carboxymethylcellulose supplied as a white or yellowish free flowing powder. It is one of the most versatile of all water-soluble hydrocolloids and has a number of important properties making it useful in many industrial applications. This product is a multifunctional hydrocolloid and has the ability to impart several important characteristics to a formulation through its mode of action. view less | |
| AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
| AFCONA - 3085 | AFCONA Additives Sdn Bhd | AFCONA – 3085 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive that cross-links in polyurethane systems and baking paints. AFCONA – 3085 finds application in solvent-based co...view more AFCONA – 3085 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive that cross-links in polyurethane systems and baking paints. AFCONA – 3085 finds application in solvent-based coatings, including wood coatings. view less | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product i...view more Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product is used as a thickener, protective colloid, binder, stabilizer, and suspending agent, particularly in applications where a nonionic material is desired. view less | |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...view more Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. view less | Request Sample |
| RHEOBYK-415 | BYK | RHEOBYK-415 is a liquid rheology additive for solvent-borne baking coatings and forced drying systems to improve anti-sagging properties. It works together with the binder and builds a three-dimensional network via hydrogen bonds and van der Waals forces. In addition to the dosage level and the polarity of the system, the degree of disentanglement of the higher molecular weight additive is key to the effectiveness. The higher molecular weight and the more pronounced pseudoplastic flow...view more RHEOBYK-415 is a liquid rheology additive for solvent-borne baking coatings and forced drying systems to improve anti-sagging properties. It works together with the binder and builds a three-dimensional network via hydrogen bonds and van der Waals forces. In addition to the dosage level and the polarity of the system, the degree of disentanglement of the higher molecular weight additive is key to the effectiveness. The higher molecular weight and the more pronounced pseudoplastic flow behavior are the reasons for the more temperature-stable viscosity behavior of RHEOBYK-415, even at higher drying temperatures. view less | Request Sample |
| AFCONA - 3030 | AFCONA Additives Sdn Bhd | AFCONA – 3030 is an organically modified polyether siloxane. This clear to slightly yellow liquid functions as a moderate slip, leveling, and anti-crater additive for solvent and water-based systems. AFCONA – 3030 finds application in solvent-based coatin...view more AFCONA – 3030 is an organically modified polyether siloxane. This clear to slightly yellow liquid functions as a moderate slip, leveling, and anti-crater additive for solvent and water-based systems. AFCONA – 3030 finds application in solvent-based coatings and water-based coatings. view less | |
| AFCONA - 3035 | AFCONA Additives Sdn Bhd | AFCONA – 3035 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid is compatible with high polar systems and functions as a leveling additive for the prevention of surface defects in UPE and epoxy systems. AFCONA – 3035 ...view more AFCONA – 3035 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid is compatible with high polar systems and functions as a leveling additive for the prevention of surface defects in UPE and epoxy systems. AFCONA – 3035 finds application in water- and solvent-based coatings. view less | |
| BYK®-322 | BYK | BYK®-322 is aralkyl modified polymethylalkylsiloxane. This product is a silicone additive which is thermally stable at baking temperatures up to 250°C. Causing only a slight surface tension reduction, it does not normally stabilize foam and can even impa...view more BYK®-322 is aralkyl modified polymethylalkylsiloxane. This product is a silicone additive which is thermally stable at baking temperatures up to 250°C. Causing only a slight surface tension reduction, it does not normally stabilize foam and can even impart a defoaming action. Coatings containing BYK-322 can normally be recoated without any loss of adhesion. view less | Request Sample |
| Powdermate® 570FL | Arxada – Troy Corporation | Powdermate® 570FL enhances the flow and leveling of a powder coating. It resists cratering, orange peel, and hazing, thereby providing a superior surface appearance. In addition, this product provides excellent recoatability and inter-coat adhesion over ...view more Powdermate® 570FL enhances the flow and leveling of a powder coating. It resists cratering, orange peel, and hazing, thereby providing a superior surface appearance. In addition, this product provides excellent recoatability and inter-coat adhesion over previously coated substrates. These high performance properties make Powdermate® 570FL particularly suitable for all types of automotive coatings. This additive is effective in both thermal and UV cured systems and is compatible with acrylic, epoxy, and polyester resins. view less | Request Sample |
| BYK®-346 | BYK | BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the p...view more BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process. view less | Request Sample |
| RHEOBYK-M 2600 VF | BYK | RHEOBYK-M 2600 VF is a non-ionic, hydrophobic modified polymer designed especially for thickening of emulsion paints and aqueous coatings systems. It is used in various emulsions such as styrene acrylates, pure acrylates, polyvinyl acetates, PU-dispersions, and others, as well as in alkyd and epoxy emulsions. The use of this product adds no VOC-solvents to the paint and improves the resistance against blistering. It also raises apparent viscosity significantly, gives excellent flow...view more RHEOBYK-M 2600 VF is a non-ionic, hydrophobic modified polymer designed especially for thickening of emulsion paints and aqueous coatings systems. It is used in various emulsions such as styrene acrylates, pure acrylates, polyvinyl acetates, PU-dispersions, and others, as well as in alkyd and epoxy emulsions. The use of this product adds no VOC-solvents to the paint and improves the resistance against blistering. It also raises apparent viscosity significantly, gives excellent flow and levelling, provides higher layer thickness in one pass, and reduces spattering during application. view less | Request Sample |
| BYK®-347 | BYK | BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-...view more BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended. view less | Request Sample |
| AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow...view more AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow aid. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less | Request Sample |
| AFCONA - 3777 | AFCONA Additives Sdn Bhd | AFCONA – 3777 is a fluorocarbon modified polymer. This clear to slightly yellow liquid functions as an anti-crater, substrate wetting, and leveling agent without intercoat adhesion interference. AFCONA – 3777 lowers surface tension, features in-can transp...view more AFCONA – 3777 is a fluorocarbon modified polymer. This clear to slightly yellow liquid functions as an anti-crater, substrate wetting, and leveling agent without intercoat adhesion interference. AFCONA – 3777 lowers surface tension, features in-can transparency, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, and epoxies. view less | |
| BYK®-348 | BYK | BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...view more BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. view less | Request Sample |
| AFCONA - 3285 | AFCONA Additives Sdn Bhd | AFCONA – 3285 is an organically modified polyether polysiloxane. This hazy to slightly yellow liquid functions as a permanent slip, leveling, and anti-foam agent that cross-links in polyurethane systems and baking paints. AFCONA – 3285 is compatible and f...view more AFCONA – 3285 is an organically modified polyether polysiloxane. This hazy to slightly yellow liquid functions as a permanent slip, leveling, and anti-foam agent that cross-links in polyurethane systems and baking paints. AFCONA – 3285 is compatible and finds application in solvent-based coatings, including wood coatings. view less | |
| BYK®-323 | BYK | BYK®-323 is an aralkyl modified polymethylalkylsiloxane. This product acts in a defoaming fashion (i.e., no or only slight foam stabilization), depending on the polarity of the paint system. It is heat resistant up to 250°C and does not decrease intercoat adhesion when overcoated. In wood and furniture coatings, BYK-323 is used to orient the flatting agent in flat topcoats and in multi-coat systems. Even in difficult to flat high-solids polyurethane, acid curing and unsaturated polyester coatings, the use of BYK-323 does not lead to shining up. In addition, optimal orientation of the flatting agent is achieved. In flow...view more BYK®-323 is an aralkyl modified polymethylalkylsiloxane. This product acts in a defoaming fashion (i.e., no or only slight foam stabilization), depending on the polarity of the paint system. It is heat resistant up to 250°C and does not decrease intercoat adhesion when overcoated. In wood and furniture coatings, BYK-323 is used to orient the flatting agent in flat topcoats and in multi-coat systems. Even in difficult to flat high-solids polyurethane, acid curing and unsaturated polyester coatings, the use of BYK-323 does not lead to shining up. In addition, optimal orientation of the flatting agent is achieved. In flow coat systems, BYK-323 provides a stable curtain. In industrial coatings, BYK-323 supports the orientation of flatting agents and aluminium flakes in metallics. view less | Request Sample |
| BYK®-320 | BYK | BYK®-320 is a solution of a polyether modified polymethylalkylsiloxane. This product is a silicone leveling additive with defoaming properties. It is particularly suitable for non-polar to medium-polar paint systems. Its defoaming activity rises with incr...view more BYK®-320 is a solution of a polyether modified polymethylalkylsiloxane. This product is a silicone leveling additive with defoaming properties. It is particularly suitable for non-polar to medium-polar paint systems. Its defoaming activity rises with increasing coating polarity. In automotive and industrial coatings, BYK-320 will not exhibit problems with ghosting or telegraphing. To avoid these effects BYK-320 should be added to the paint which has to be recoated. view less | Request Sample |
| AFCONA - 3230 | AFCONA Additives Sdn Bhd | AFCONA – 3230 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization. AFCONA – 3230 finds application in polyurethane wood coating systems, polyurethane top coats in p...view more AFCONA – 3230 is a special organically modified polysiloxane. This clear to slightly yellow liquid provides high slip performance without foam stabilization. AFCONA – 3230 finds application in polyurethane wood coating systems, polyurethane top coats in plastic coatings application, and refinish topcoats based on polyurethane. view less | |
| AFCONA - 3233 | AFCONA Additives Sdn Bhd | AFCONA – 3233 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a moderate, dry-type slip, leveling, and anti-cratering additive in water-based coatings. AFCONA – 3233 finds application in air-drying alky...view more AFCONA – 3233 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a moderate, dry-type slip, leveling, and anti-cratering additive in water-based coatings. AFCONA – 3233 finds application in air-drying alkyd systems, polyurethane systems, and industrial baking systems. view less | |
| AFCONA - 3522 | AFCONA Additives Sdn Bhd | AFCONA – 3522 is an organically modified polysiloxane and water emulsion. This milky white liquid improves the water resistance and slip and surface smoothness while providing anti-crater and substrate wetting properties, leveling, and low foam stabilizat...view more AFCONA – 3522 is an organically modified polysiloxane and water emulsion. This milky white liquid improves the water resistance and slip and surface smoothness while providing anti-crater and substrate wetting properties, leveling, and low foam stabilization in water. AFCONA – 3522 finds application in water-based coatings. view less | |
| AFCONA - 3232 | AFCONA Additives Sdn Bhd | AFCONA – 3232 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive in solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3232 finds applicat...view more AFCONA – 3232 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive in solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3232 finds application in wood coatings based on NC, acid curing, and polyurethane, and in thermoplastic resins. view less | |
| AFCONA - 3277 | AFCONA Additives Sdn Bhd | AFCONA – 3277 is a fluorocarbon modified polymer. This hazy to yellow liquid contains 100% active ingredients and functions as an anti-crater, substrate wetting, and silicone-free leveling agent and foam stabilizer and de-aeration aid. AFCONA – 3277 finds...view more AFCONA – 3277 is a fluorocarbon modified polymer. This hazy to yellow liquid contains 100% active ingredients and functions as an anti-crater, substrate wetting, and silicone-free leveling agent and foam stabilizer and de-aeration aid. AFCONA – 3277 finds application in solvent-based and high solid systems, and solvent-free systems such as ultraviolet, epoxy, polyurethane, and PMMA flooring. view less | |
| EFKA® FL 3740 EH | BASF Formulation Additives | EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow...view more EFKA® FL 3740 is a levelling agent with air release properties for nonaqueous, liquid coating systems, as well as for powder coatings and binders for powder coatings. Due to its chemical structure, EFKA® FL 3740 modifies the surface tension of the coatings. It also eliminates or reduces cratering, fish-eyes and orange peel; improves the flow, dispersion and floating behaviour, prevents air entrapment and optimizes wetting of the substrate. EFKA® FL 3740 is also ideally suited to be used in the manufacture of powder coatings or binders for powder coatings. For the preparation of a master batch, it is recommended to use a mixing of 9 parts of polyester resin with 1 part EFKA® FL 3740. This mixture is perfectly suited for direct application in the premix and extrusion process after melting, homogenization, cooling and granulation. The drawbacks of leveling agents applied on SiO2 are avoided. In particular, pigmented and transparent powder coatings with excellent levelling properties are obtained for the production of weatherproof powder coatings. view less | |
| AFCONA - 3031 | AFCONA Additives Sdn Bhd | AFCONA – 3031 is an organically modified polyether siloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for metal and ultraviolet coatings and visually enhances film thickness. AFCONA – 3031 finds application in solvent...view more AFCONA – 3031 is an organically modified polyether siloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for metal and ultraviolet coatings and visually enhances film thickness. AFCONA – 3031 finds application in solvent- and water-based coatings, industrial baking systems, and car refinish polyurethane top clear coats. view less | |
| AFCONA - 3033 | AFCONA Additives Sdn Bhd | AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds applica...view more AFCONA – 3033 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive for solvent-based coatings while enhancing slip performance and surface smoothness. AFCONA – 3033 finds application in wood and clear coatings, thermoplastic resins, NC, acid curing, polyurethanes, and in printing inks. view less | |
| LAPONITE® RDS | BYK | LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flow...view more LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulations including household and industrial surface coatings, cleansers, agrochemical and horticultural products. view less | Request Sample |
| BYK®-300 | BYK | BYK®-300 is a solution of a polyether modified polydimethylsiloxane. This product is a standard surface additive in the coatings industry for all solvent-borne systems. | Request Sample |
| NACURE® 1953 | King Industries, Inc. | NACURE® 1953 is an amine blocked DNNSA stimulant and appears as a clear amber liquid. This is a product that is made to be applied in higher bake amino crosslinked systems like metal decorating, coil coatings and can also be applied in things such as electrocoating and appliance finishes. This product is resistant to detergent, overbake, humidity, and offers great flow...view more NACURE® 1953 is an amine blocked DNNSA stimulant and appears as a clear amber liquid. This is a product that is made to be applied in higher bake amino crosslinked systems like metal decorating, coil coatings and can also be applied in things such as electrocoating and appliance finishes. This product is resistant to detergent, overbake, humidity, and offers great flow and leveling, along with good solubility in organic solvents. NACURE® 1953 is soluble in aliphatic and aromatic hydrocarbons, alcohol, ketones, esters, glycol ethers and is insoluble in water. view less | |
| Polyether Modified Siloxane FD-408 | Zhejiang Feidian Chemical Co., Ltd. | FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wett...view more FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wetting agent and leveling agent for water-based polyurethanes. view less | |
| EFKA® RM 1920 | BASF Formulation Additives | EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films on vertical surfaces is effectively prevented whilst the working and flow...view more EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films on vertical surfaces is effectively prevented whilst the working and flow properties are also generally improved. Pigment settling is also substantially reduced. EFKA® RM 1920 can be used in most non-aqueous coatings both with and without solvents. The lower the polarity of the coating, the better is its performance. view less | |
| AFCONA - 3034 | AFCONA Additives Sdn Bhd | AFCONA – 3034 is a fluorocarbon containing organically modified polysiloxane. This clear to slightly yellow liquid is an additive designed to reduce surface tension, and to improve substrate wetting, anti-crater, and levelling performance. AFCONA – 3034 f...view more AFCONA – 3034 is a fluorocarbon containing organically modified polysiloxane. This clear to slightly yellow liquid is an additive designed to reduce surface tension, and to improve substrate wetting, anti-crater, and levelling performance. AFCONA – 3034 finds application in most paint systems, water- and solvent-based industrial coatings, plastic coatings, and industrial baking systems. view less | |
| AFCONA - 3231 | AFCONA Additives Sdn Bhd | AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds appl...view more AFCONA – 3231 is an organically modified polyether polysiloxane. This clear to slightly yellow liquid functions as a slip and leveling additive mainly used in metal and ultraviolet coatings while visually enhancing film thickness. AFCONA – 3231 finds application in metal coatings such as industrial baking systems, car refinish polyurethane top clear coats, and in printing inks. view less | |
| AFCONA - 3580 | AFCONA Additives Sdn Bhd | AFCONA – 3580 is an organically modified polysiloxane. This clear to slightly yellow liquid functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low ...view more AFCONA – 3580 is an organically modified polysiloxane. This clear to slightly yellow liquid functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low foam stabilization in water. AFCONA – 3580 finds application in water-based coatings with a pH range of four to ten. view less | |
| AFCONA - 3670 | AFCONA Additives Sdn Bhd | AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de...view more AFCONA – 3670 is a fluorocarbon modified polyacrylic. This clear to slightly yellow liquid functions as a leveling, anti-crater, and substrate wetting agent that manages surface control and lowers surface tension. AFCONA – 3670 acts as an anti-foam and de-aeration aid, does not interfere with intercoat adhesion, and finds application in solvent-based coatings such as baking paints, polyurethane coatings, epoxies, and printing inks. view less | |
| AFCONA - 3238 | AFCONA Additives Sdn Bhd | AFCONA – 3238 is an organically modified polyalkyl polysiloxane. This clear to slightly yellow liquid is compatible and functions as a slip, leveling, and anti-foam agent in solventless epoxies, high solid or solventless polyurethanes, paints applied by c...view more AFCONA – 3238 is an organically modified polyalkyl polysiloxane. This clear to slightly yellow liquid is compatible and functions as a slip, leveling, and anti-foam agent in solventless epoxies, high solid or solventless polyurethanes, paints applied by curtain coater, paints applied by airless spray application, and ultraviolet curing systems. AFCONA – 3238 finds application in matted finish coatings. view less | |
| AFCONA - 3585 | AFCONA Additives Sdn Bhd | AFCONA – 3585 is an organically modified polysiloxane. This clear to slightly yellow liquid functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low f...view more AFCONA – 3585 is an organically modified polysiloxane. This clear to slightly yellow liquid functions as a silicone-based leveling and anti-crater agent which prevents intercoat adhesion while providing substrate wetting and leveling properties, and low foam stabilization. AFCONA – 3585 has strong surface tension reduction, and is compatible, finding application in water-based coatings. view less | |
| AFCONA - 3835 | AFCONA Additives Sdn Bhd | AFCONA – 3835 is an organically modified polyether reactive polysiloxane. This clear to slightly yellow liquid functions as a cross-linkable slip and leveling additive. AFONCA – 3585 finds application in ultraviolet coatings, anti-blocking and anti-scratc...view more AFCONA – 3835 is an organically modified polyether reactive polysiloxane. This clear to slightly yellow liquid functions as a cross-linkable slip and leveling additive. AFONCA – 3585 finds application in ultraviolet coatings, anti-blocking and anti-scratch coatings, ultraviolet and EB curing systems, and in systems requiring an unsaturated bond cross-linking in the primary curing reaction, such as UPE systems. view less |
