| VESTAGON® EP-BF 1350 | Evonik Operations GmbH, BL Crosslinkers | VESTAGON® EP-BF 1350 is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the splitting temperature of approximately 160°C. The crossli...view more VESTAGON® EP-BF 1350 is a polyisocyanate adduct used in combination with hydroxy functional resins. Because of an internal blocking mechanism, the product retains its processing stability up to the splitting temperature of approximately 160°C. The crosslinker is delivered in the form of fine granules. Numerous OH-terminated polyester and acrylics can be used to achieve weather-resistant decorative powder coatings with excellent physical properties. view less | Request Sample |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| LUMIFLON® LF-710F | Univar Solutions | LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin can be crosslinked with standard aliphatic blocked isocyanate...view more LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin can be crosslinked with standard aliphatic blocked isocyanates. Potential applications for coatings made with LF-710F include architectural (window frames and construction panels), heavy equipment coatings, and clear coats for automotive and aerospace applications. view less | Request Sample |
| LUMIFLON® LF-710F | AGC Chemicals Americas, Inc. | LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin can be crosslinked with standard aliphatic blocked isocyanate...view more LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin can be crosslinked with standard aliphatic blocked isocyanates. Potential applications for coatings made with LF-710F include architectural (window frames and construction panels), heavy equipment coatings, and clear coats for automotive and aerospace applications. view less | |
| Permax™ 232 | Lubrizol Advanced Materials, Inc. | Permax™ 232 is used in high performance coating applications where a hydrophilic polymer is needed for moisture vapor transmission, hydrophilic surface treatment, or excellent ionic compatibility is required. Permax™ formulas can be engineered to give controlled moisture vapor transmission rates, excellent washfastness and softness. Permax™ 232 is TSCA, EINECS, and DSL compliant. Permax™ 232 can be crosslinked with isocyanate...view more Permax™ 232 is used in high performance coating applications where a hydrophilic polymer is needed for moisture vapor transmission, hydrophilic surface treatment, or excellent ionic compatibility is required. Permax™ formulas can be engineered to give controlled moisture vapor transmission rates, excellent washfastness and softness. Permax™ 232 is TSCA, EINECS, and DSL compliant. Permax™ 232 can be crosslinked with isocyanates, polyfunctional aziridines, melamine formaldehyde and carbodiimide cross linkers. view less | |
| SETALUX® 17-1745 | Allnex | SETALUX® 17-1745 is an acrylic polyol, with 2.0% OH, that is designed for use with aliphatic poly-isocyanates in 2 component coatings systems. When so used, SETALUX® 17-1745 is quick to surface dry and through dry and has a long useful potlife. This resin...view more SETALUX® 17-1745 is an acrylic polyol, with 2.0% OH, that is designed for use with aliphatic poly-isocyanates in 2 component coatings systems. When so used, SETALUX® 17-1745 is quick to surface dry and through dry and has a long useful potlife. This resin also has good chemical resistance, excellent mar and stain resistance and good compatibility with cellulosic film formers. SETALUX® 17-1745 also possesses good lightfastness. view less | Request Sample |
| K-KAT® XK-617 | King Industries, Inc. | K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant withou...view more K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant without the concern of toxicity. It appears as a pale, light amber liquid, offers good cure response, and is environmentally more acceptable. This product is soluble in glycol ethers, n-butanol, ketones, aliphatics. aromatics, and is partially soluble in water. It is normally applied in 2K urethanes for cast elastomers. view less | |
| Amicure® IC-221 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self...view more Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-221 support high aesthetics, UV stability and rapid property development for fast return to service. Amicure® IC-221 curing agent is free of solvents, alkyl phenol derivatives and benzyl alcohol. view less | Request Sample |
| Borchi® Kat 320 | Borchers, A Company of OMG | Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be ...view more Borchi® Kat 320 is a highly reactive tin-free catalyst based on bismuth 2-Ethylhexanoate used as accelerator for solventborne one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 320 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 320 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| Tolonate™ D2 | Vencorex | Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component...view more Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component polyurethane systems for weatherable coatings. It gives excellent mechanical properties in conjunction with outstanding resistance to solvents, abrasion and chemical products. This product is commonly used in Automotive OEM formulations, can and coil coatings and other general industrial coatings on metal. view less | |
| Tolonate™ HDB | Vencorex | Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. Th...view more Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. This product is also recommended for exterior protective coatings for car repair, general industrial, plastics, and wood. view less | |
| Tolonate™ HDB 75 B | Vencorex | Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd ur...view more Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This product is also recommended for weatherable protective coatings for industrial maintenance and auto refinish applications. view less | |
| Tolonate™ HDB 75 BX | Vencorex | Tolonate™ HDB 75 BX is an aliphatic polyisocyanate biuret (HDI homopolymer), supplied at 75% solids in a blend of butyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic it...view more Tolonate™ HDB 75 BX is an aliphatic polyisocyanate biuret (HDI homopolymer), supplied at 75% solids in a blend of butyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic items. This product is also recommended for weatherable protective coatings for industrial maintenance and auto refinish applications. view less | |
| Tolonate™ HDB 75 M | Vencorex | Tolonate™ HDB 75 M is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in methoxypropyl acetate. It is used for conventional two component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This produ...view more Tolonate™ HDB 75 M is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in methoxypropyl acetate. It is used for conventional two component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This product is also recommended for high durability protective coatings for industrial maintenance and auto refinish applications. view less | |
| Tolonate™ HDB 75 MX | Vencorex | Tolonate™ HDB 75 MX is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in a blend of methoxypropyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and meta...view more Tolonate™ HDB 75 MX is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in a blend of methoxypropyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic devices. This product is also recommended for high durability protective coatings for industrial maintenance. view less | |
| Tolonate™ HDB-LV | Vencorex | Tolonate™ HDB-LV is a low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solvent-free polyurethane systems, and as...view more Tolonate™ HDB-LV is a low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solvent-free polyurethane systems, and as an intermediate for prepolymer synthesis. This product is also recommended for exterior protective coatings for car repair, general industrial, plastic, and wood applications. view less | |
| Tolonate™ HDT | Vencorex | Tolonate™ HDT is a medium viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exter...view more Tolonate™ HDT is a medium viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exterior protective coatings for automotive, industrial machinery, plastic parts and car repair. view less | |
| Tolonate™ HDT 90 | Vencorex | Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and va...view more Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exterior protective coatings for automotive OEM, car repair, industrial machinery, and plastic parts. view less | |
| Tolonate™ HDT 90 B | Vencorex | Tolonate™ HDT 90 B is an aliphatic polyisocyanate trimer (HDI homopolymer) supplied at 90% solids in a butyl acetate. It is used for high solids two-component polyurethane coatings and varnishes as well as aromatic solvent-free 2 K polyurethane coatings. ...view more Tolonate™ HDT 90 B is an aliphatic polyisocyanate trimer (HDI homopolymer) supplied at 90% solids in a butyl acetate. It is used for high solids two-component polyurethane coatings and varnishes as well as aromatic solvent-free 2 K polyurethane coatings. This product is also suggested for exterior protective coatings for automotive OEM, car repair, indutrial machinery, and plastic parts. view less | |
| Tolonate™ HDT-LV | Vencorex | Tolonate™ HDT-LV is a low viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solventfree polyurethane systems, and in...view more Tolonate™ HDT-LV is a low viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solventfree polyurethane systems, and intermediate for prepolymer synthesis. This product is also suggested for exterior protective coatings for automotive OEM, industrial machinery, plastic parts and car repair. view less | |
| Tolonate™ HDT-LV2 | Vencorex | Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used ...view more Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used for very high solids, low VOC, two component polyurethanes coatings and varnishes. This product is also suggested for solventfree and waterborne polyurethane systems as well as polyurethane resin synthesis intermediates. view less | |
| Tolonate™ X FD 90 B | Vencorex | Tolonate™ X FD 90 B is a fast drying aliphatic polyisocyanate based on high functionality hexamethylene diisocyanate trimer (HDI homopolymer) supplied at 90% solids in butyl acetate. It is suggested for use as a hardener of fast drying non-yellowing two-p...view more Tolonate™ X FD 90 B is a fast drying aliphatic polyisocyanate based on high functionality hexamethylene diisocyanate trimer (HDI homopolymer) supplied at 90% solids in butyl acetate. It is suggested for use as a hardener of fast drying non-yellowing two-pack polyurethane coatings for car repair, marine and protective, ACE and machinery, aerospace, general industry, automotive OEM and plastic parts. view less | |
| Tolonate™ IDT 70 B | Vencorex | Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resista...view more Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resistance. This product is also suitable for exterior protective coatings for automotive OEM and car repair, general industrial, plastics, and wood applications. view less | |
| Akuacure 4000N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 4000N is a high performance, anti-yellowing, water dispersible polyisocyanate featuring fine particle size. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 8004N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 8004N is a high performance, anti-yellowing, water dispersible polyisocyanate ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 8100N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 8100N is a high performance, anti-yellowing, water dispersible polyisocyanate ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 8103N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 8103N is a high performance, anti-yellowing, water dispersible polyisocyanate featuring fast drying. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 1073N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 1073N is an anti-yellowing, water dispersible polyisocyanate featuring very easy hand mixing characteristics and high efficiency. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 1070N | T&L Co., Ltd. Polymer Technology Centre | Akuacure 1070N is an anti-yellowing, water dispersible polyisocyanate featuring good hand mixing characteristics, high efficiency, and good chemical resistance. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 3100F | T&L Co., Ltd. Polymer Technology Centre | Akuacure 3100F is a per-fluorine modified, water dispersible polyisocyanate featuring reduced surface tension and excellent water resistance. This product is ideal for use in adhesive, paint, and coating applications. | |
| Akuacure 3300FN | T&L Co., Ltd. Polymer Technology Centre | Akuacure 3300FN is a per-fluorine modified, water dispersible polyisocyanate featuring reduced surface tension and excellent water resistance. This product is ideal for use in adhesive applications. | |
| Tolonate™ X F 450 | Vencorex | Tolonate™ X F 450 is a solvent free and low viscosity polyisocyanate based on HDI. This Tolonate™ is part of flexible polyisocyanate range developed by Vencorex specifically to provide elasticity to your coatings while maintaining high h...view more Tolonate™ X F 450 is a solvent free and low viscosity polyisocyanate based on HDI. This Tolonate™ is part of flexible polyisocyanate range developed by Vencorex specifically to provide elasticity to your coatings while maintaining high hardness. It is especially suitable for fast drying formulations like aliphatic polyureas and polyaspartics, where it will overcome their brittleness and provide extended pot-life. view less | |
| Borchi® Kat 315 | Borchers, A Company of OMG | Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat...view more Borchi® Kat 315 is a highly reactive tin-free catalyst based on bismuth neodecanoate used as accelerator for solventborne or solvent-free one- and two-component polyurethane systems and stoving enamels based on blocked isocyanates. Furthermore Borchi® Kat 315 can be used in the catalysis of PU foams as well as RTV silicone resins. This catalyst contains no additional organic complexing agents. Borchi® Kat 315 is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like DBTL. view less | |
| K-KAT® 4205 | King Industries, Inc. | K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack free time along with good viscosity stability. It is effective at low metal concentrations and also effective with a mix of isocyanate...view more K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack free time along with good viscosity stability. It is effective at low metal concentrations and also effective with a mix of isocyanates and polycols. K-KAT® 4205 is soluble in ketones, aromatic hydrocarbons, and esters. It can be applied to automotive topcoats, maintenance coatings, structural plastics coatings, and aerospace coatings. view less | |
| PTMG | Kowa American Corporation | PTMG (Poly(tetramethylene ether)glycol / PTMG) is a linear polyether glycol with hydroxyl groups on both ends. As a polyol, it reacts readily with isocyanates (i.e., MDI, TDI, etc.) to produce resins with excellent properties such as impact resistance, hy...view more PTMG (Poly(tetramethylene ether)glycol / PTMG) is a linear polyether glycol with hydroxyl groups on both ends. As a polyol, it reacts readily with isocyanates (i.e., MDI, TDI, etc.) to produce resins with excellent properties such as impact resistance, hydrolysis resistance, wear resistance, tear resistance, fungus resistance and low temperature flexibility. The Polyurethane applications are Polyurethane Elastomers, Thermoset Elastomers (TSU), Thermoplastic Elastomers (TPU), Paints and Coatings, Adhesives and Sealants, and Artificial Suede and Synthetic Leather. The Polyester Applications are Polyester Elastomers (TPEE), Polyamide Applications and Polyether Amide Elastomers. view less | Request Sample |
| Bayhydur® XP 2547 | Covestro | Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins s...view more Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins such as Bayhydrol® XP 2542. view less | |
| Wannate® HDI Hexamethylene Diisocyanate | Wanhua Chemical Group Co., Ltd. | Wannate® HDI is a liquid aliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity. Wannate® HDI is a raw material for polyurethanes. Products based on Wannate® HDI are mainly used in PU varnish, top-grade coatings, car refinishin...view more Wannate® HDI is a liquid aliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity. Wannate® HDI is a raw material for polyurethanes. Products based on Wannate® HDI are mainly used in PU varnish, top-grade coatings, car refinishing paint, plastic coating, top-grade wood-paint, industrial coating, anti-corrosive coating, elastomers, adhesives and textile finshing agent. Polyurethane coatings based on Wannate® HDI have a high degree of oil resistance coupled with good wear-resisting; It is also lightfast and has the property of powdering resistance,color retention and weathering resistance. In addition, Wannate® HDI also can be used in coating curing agent, high polymer adhesive, low temperature adhesive for printing paste, collar copolymer coating, and immobilized enzyme adhesive. view less | |
| Polyglykol M 1000 | Clariant - Coatings & Construction Chemicals | Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 970 - 1060g/mol. It is a waxy white to slightly yellowish solid at room temperature. Polyglykol M 1000 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanate...view more Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 970 - 1060g/mol. It is a waxy white to slightly yellowish solid at room temperature. Polyglykol M 1000 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. view less | |
| Polyglykol M 3000 | Clariant - Coatings & Construction Chemicals | Polyglykol M 3000 is a polyethylenglycolmonomethylether with a molecular weight of 2850 - 3150g/mol. It is a waxy white to slightly yellowish solid at room temperature with only very light smell. Polyglykol M 3000 is available as melt supplied in heated tank trucks or as remeltable solid in steel drums. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanate...view more Polyglykol M 3000 is a polyethylenglycolmonomethylether with a molecular weight of 2850 - 3150g/mol. It is a waxy white to slightly yellowish solid at room temperature with only very light smell. Polyglykol M 3000 is available as melt supplied in heated tank trucks or as remeltable solid in steel drums. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. view less | |
| SETALUX® 57-1746 | Allnex | SETALUX® 57-1746 is a HAPs-free/ VOC free acrylic polyol designed for use with aliphatic poly-isocyanates in 2 component coatings systems to produce a hard durable coating with very good chemical and abrasion resistance. SETALUX® 57-1746 also possesses ex...view more SETALUX® 57-1746 is a HAPs-free/ VOC free acrylic polyol designed for use with aliphatic poly-isocyanates in 2 component coatings systems to produce a hard durable coating with very good chemical and abrasion resistance. SETALUX® 57-1746 also possesses excellent gloss, color retention and durability. The addition of a tin catalyst (0.01 – 0.05% based on resin solids) will improve the film properties. Lower catalyst levels promote better chemical resistance and extended pot life. Higher catalyst concentrations provide very rapid cure times. view less | Request Sample |
| K-KAT® 5218 | King Industries, Inc. | K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the addition of 2,4-pentanedione, fast tack free time, exterior durability, and is effective with a variety of isocyanate...view more K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the addition of 2,4-pentanedione, fast tack free time, exterior durability, and is effective with a variety of isocyanates and polyols. It appears as a slightly hazy, amber liquid and can be applied in automotive topcoats, aerospace coatings, maintenance coatings, and coatings for structural plastics. This product is soluble in ketones, esters, glycol ethers, alcohols, and aromatic hydrocarbons. view less | |
| Polyglykol M 350 PU | Clariant - Coatings & Construction Chemicals | Polyglykol M 350 PU is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. For special applications (polyurethanes) a product marked Polyglykol M 350 PU with low alkali content (< 10 mg/kg) and low water content (< 0,1 %) is avail...view more Polyglykol M 350 PU is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. For special applications (polyurethanes) a product marked Polyglykol M 350 PU with low alkali content (< 10 mg/kg) and low water content (< 0,1 %) is available. The pH-value of this special type is between 3 – 5. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. view less | |
| Polyglykol M 500 PU | Clariant - Coatings & Construction Chemicals | Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 470 – 530g/mol. It is a clear neutral liquid at room temperature. This grade is used for special applications (polyurethanes) because of its low alkali content (< 10 mg/kg...view more Polyglykol M 500 PU is a monomethoxy polyethylene glycol with a molecular weight of 470 – 530g/mol. It is a clear neutral liquid at room temperature. This grade is used for special applications (polyurethanes) because of its low alkali content (< 10 mg/kg). The pH value of this special type is between 3 – 5. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. view less | |
| Bayhydur® BL XP 2706 | Covestro | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...view more Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. view less | |
| Bayhydur® XP 2700 | Covestro | Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applica...view more Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. view less | |
| Bayhydur® 302 | Covestro | Bayhydur® 302 is a solvent free, water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). Used as a crosslinking agent for two-component waterborne polyurethane coatings. | |
| Bayhydur® 304 | Covestro | Bayhydur® 304 is a hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is primarily used as the crosslinker for aqueous polyol binders (Bayhydrol). | |
| Bayhydur® 303 | Covestro | Bayhydur® 303 is a solvent free, water-dispersible polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used as a crosslinking agent for hydroxyl-function waterborne resins. | |
| Bayhydur® BL 5335 | Covestro | Bayhydur® BL 5335 is water-dispersed blocked aliphatic polyisocyanate resin based on dicyclohexylmethane diisocyanate (H12MDI) dissolved in water/MPA/xylene, 56 : 4.5 : 4.5. Used as the hardener component for 1K-waterborne coatings. Bayhydur® BL 5335 is ...view more Bayhydur® BL 5335 is water-dispersed blocked aliphatic polyisocyanate resin based on dicyclohexylmethane diisocyanate (H12MDI) dissolved in water/MPA/xylene, 56 : 4.5 : 4.5. Used as the hardener component for 1K-waterborne coatings. Bayhydur® BL 5335 is used as a crosslinking agent for hydroxyl-functional water-borne resins view less | |
| Bayhydur® HD 2018 | Covestro | Bayhydur® HD 2018 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free, water-dispersible crosslinking agent for two-component waterborne polyurethane coatings. | |
| Bayhydur® XP 7165 | Covestro | Bayhydur® XP 7165 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free, water-dispersible crosslinking agent for two-component waterborne polyurethane coatings. | |
| Phenoxy PK™HP-80 | Gabriel Performance Products | Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, and excellent vapor barrier properties. Phenoxy resins also react with cross-linkers like isocyanate...view more Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, and excellent vapor barrier properties. Phenoxy resins also react with cross-linkers like isocyanates, phenolic and melamine resins along the backbone hydroxyl groups. PK™HP-80 provides for ease of incorporation into liquid resins due to its high surface area; recommended levels of PKHP-80 incorporated into epoxy resins are 5 to 25% depending on the desired mix viscosity. view less | |
| CYMEL® NF 2000A | Allnex | CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanate...view more CYMEL NF 2000A resin is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL NF 2000A resin is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL NF 2000A resin is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. view less | Request Sample |
| Polurene MD 60 AB | S.A.P.I.C.I. SpA | Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating t...view more Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating tendencies, resulting in a smooth surface with good brightness. It also improves adhesion on difficult substrates. view less | |
| CRYLCOAT® 2845-0 | Allnex | CRYLCOAT® 2845-0 is a hydroxyl functional polyester resin with for use with blocked polyisocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2845-0 require less blocked polyisocyanate without affecting the good overal...view more CRYLCOAT® 2845-0 is a hydroxyl functional polyester resin with for use with blocked polyisocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2845-0 require less blocked polyisocyanate without affecting the good overall properties. view less | Request Sample |
| CRYLCOAT® 4823-0 | Allnex | CRYLCOAT® 4823-0 is a superdurable hydroxyl functional polyester resin for use with block polyisocyanates or uretdiones in the production of powder coatings. Coatings based on CRYLCOAT® 4823-0 exhibit good flow, mechanical, chemical, and weathering resist...view more CRYLCOAT® 4823-0 is a superdurable hydroxyl functional polyester resin for use with block polyisocyanates or uretdiones in the production of powder coatings. Coatings based on CRYLCOAT® 4823-0 exhibit good flow, mechanical, chemical, and weathering resistance. view less | Request Sample |
| Polyglykol M 500 | Clariant - Coatings & Construction Chemicals | Polyglykol M 500 is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has a molecular weight of 470 – 530g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanate...view more Polyglykol M 500 is a clear neutral liquid at room temperature, and it can be supplied in tank trucks or in steel drums. It can be considered as a high molecular alcohol and therefore displays typical chemical reactions of alcohols. This product has a molecular weight of 470 – 530g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 500 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI > 95.4%. view less | |
| Phenoxy PK™FE | Gabriel Performance Products | Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanate...view more Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™FE may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™FE is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HB | Gabriel Performance Products | Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanate...view more Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HB may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HB is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HH | Gabriel Performance Products | Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanate...view more Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HH may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HH is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HA | Gabriel Performance Products | Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanate...view more Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HA may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HA is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Polyglykol M 350 | Clariant - Coatings & Construction Chemicals | Polyglykol M 350 is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanate...view more Polyglykol M 350 is a monomethoxy polyethylene glycol with a molecular weight of 330 – 370g/mol. It is a clear neutral liquid at room temperature. This product can be supplied in tank trucks or in steel drums. Polyglykol M 350 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 350 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 91.3%. view less | |
| Polyglykol M 750 | Clariant - Coatings & Construction Chemicals | Polyglykol M 750 is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. It has a molecular weight of 720 – 780g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanate...view more Polyglykol M 750 is a waxy white to slightly yellowish solid at room temperature. It can be supplied as melt in heated tank trucks or as solid in steel drums. Polyglykol M 750 can be considered as high molecular alcohol and therefore displays typical chemical reactions of alcohols. It has a molecular weight of 720 – 780g/mol. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 750 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 96.9%. view less | |
| Polyglykol M 2000 FL | Clariant - Coatings & Construction Chemicals | Polyglykol M 2000 FL is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as melt supplied in a heated tank truck. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanate...view more Polyglykol M 2000 FL is a monomethoxy polyethylene glycol with a molecular weight of 1800 – 2200g/mol. Polyglykol M 2000 FL is a waxy white to slightly yellowish solid at room temperature with only very light smell. This grade is available as melt supplied in a heated tank truck. M-type polyglycols are used for a wide variety of chemical reactions. With isocyanates and polyester they act as endcapping and hydrophilic component. When reacted with unsaturated monomers like acrylic or methacrylic acid esters are formed which can be copolymerisized in order to increase hydrophilicity and improve dispersing properties of polymers in water. This product is also available as Polyglykol M 2000 FL Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 98.7%. view less | |
| Borchi® Gel LW 44 | Borchers, A Company of OMG | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and c...view more Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. view less | |
| Phenoxy PK™HM-301 | Gabriel Performance Products | Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanate...view more Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). PK™HM-301 provides for improved reactivity due to the presence of primary hydroxyls and the lower glass transition temperature of the alloy. PK™HM-301 has a glass transition temperature of about 35 °C which imparts improved solids/viscosity ratios in common solvents like MEK. Coatings of PK™HM-301 exhibit high levels of flexibility and formability when appropriately cured. view less | |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanate...view more Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanate...view more Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanate...view more Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
