- Home
- Paint & Coatings
- isocyanate-free
131 Results
| VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...view more VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. view less | Request Sample |
| SETALUX® 17-1450 | Allnex | SETALUX® 17-1450 is a higher solids acetoacetate modified acrylic resin for use in combination with the higher active concentration SETALUX® 10-1440 in the isocyanate-free 3.5 VOC Ketac primer system. Lower VOC formulations are obtainable through the use ...view more SETALUX® 17-1450 is a higher solids acetoacetate modified acrylic resin for use in combination with the higher active concentration SETALUX® 10-1440 in the isocyanate-free 3.5 VOC Ketac primer system. Lower VOC formulations are obtainable through the use of exempt solvents or reactive diluents. view less | Request Sample |
| SETALUX® 57-7205 | Allnex | SETALUX® 57-7205 is a HAPs-free acetoacetate functional acrylic resin for use in combination with SETALUX® 10-1440 in the isocyanate-free "Ketac" primer system. This system provides very fast dry, good sanding, good adhesion to various substrates and sup...view more SETALUX® 57-7205 is a HAPs-free acetoacetate functional acrylic resin for use in combination with SETALUX® 10-1440 in the isocyanate-free "Ketac" primer system. This system provides very fast dry, good sanding, good adhesion to various substrates and superior topcoat hold-out. view less | Request Sample |
| MACRYNAL® GF 100/70BAC | Allnex | MACRYNAL® GF 100/70BAC is an epoxy functional acrylic crosslinker for ambient cure isocyanate-free 2-pack systems. Used in combination with specifically designed acrylics, this product leads to 2K acrylic systems that are most suited for the formulation o...view more MACRYNAL® GF 100/70BAC is an epoxy functional acrylic crosslinker for ambient cure isocyanate-free 2-pack systems. Used in combination with specifically designed acrylics, this product leads to 2K acrylic systems that are most suited for the formulation of low VOC topcoats with good outdoor resistance. view less | Request Sample |
| SETALUX® 10-1440 | Allnex | SETALUX® 10-1440 is a higher percent active ketimine modified acrylic resin for use in the isocyanate-free 3.5 VOC Ketac primer system. SETALUX® 10-1440 is used in combination with SETALUX® 17-1450 or other acetoacetate functional acrylic or polyester res...view more SETALUX® 10-1440 is a higher percent active ketimine modified acrylic resin for use in the isocyanate-free 3.5 VOC Ketac primer system. SETALUX® 10-1440 is used in combination with SETALUX® 17-1450 or other acetoacetate functional acrylic or polyester resin. Even lower VOC formulations are obtainable through use of exempt solvents and / or reactive diluents. view less | Request Sample |
| EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...view more EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. view less | Request Sample |
| DISPERBYK®-2022 | BYK | DISPERBYK®-2022 is an isocyanate-free wetting and dispersing additive for solvent-borne systems and pigment concentrates with excellent adhesion. This product deflocculates pigments and stabilizes them through steric hindrance. It prevents a possible co-f...view more DISPERBYK®-2022 is an isocyanate-free wetting and dispersing additive for solvent-borne systems and pigment concentrates with excellent adhesion. This product deflocculates pigments and stabilizes them through steric hindrance. It prevents a possible co-flocculation, which means that the colors in the pigment mixtures are free of floating and flooding. The deflocculating properties of the additive increase gloss, color strength, transparency and hiding power, and reduce the millbase viscosity. view less | Request Sample |
| KANEKA MS POLYMER® | Kaneka North America LLC | KANEKA MS POLYMER® is an isocyanate-free, low-VOC Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. KANEKA MS POLYMER® has performed successfully in various industrial ap...view more KANEKA MS POLYMER® is an isocyanate-free, low-VOC Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. KANEKA MS POLYMER® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the various Silane functional groups, which vary based on grade. With over 40 grades available, KANEKA MS POLYMER® is suitable for a variety of requirements. view less | Request Sample |
| K-FLEX® UD-320-100 | King Industries, Inc. | K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the u...view more K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the use of isocyanates. It appears as a viscous clear liquid and offers a low VOC, enhanced hardness, exterior durability, hydrolytic stability, QUV resistance, and is solvent and isocyanate free. This product is soluble in almost all organic solvents excluding aliphatic and aromatic hydrocarbons. The only was to get aromatic solubility is to combine it with a hydrogen bonding solvent. K-FLEX® UD-320-100 can be applied in industries like paper, automotive, wood, leather, and screen printing ink. view less | |
| HPP-B-9627-19-60 | US Polymers - Accurez LLC | HPP-B-9627-19-60 is an aliphatic, hydroxy functional moisture cure polyurethane resin having free isocyanate end groups available for reaction with water from the atmosphere. This resin is ideal for concrete flooring primers and topcoats wherein excellent...view more HPP-B-9627-19-60 is an aliphatic, hydroxy functional moisture cure polyurethane resin having free isocyanate end groups available for reaction with water from the atmosphere. This resin is ideal for concrete flooring primers and topcoats wherein excellent hardness development, superb weatherability (non-yellowing) and ultra-high gloss is desirable. Excellent for use in extremely high moisture conditions. view less | Request Sample |
| NeoRez® 1099 | DSM Coating Resins, LLC. | NeoRez® 1099 is a very hard aromatic waterborne polyurethane polymer designed for interior applications where high performance, hardness, abrasion resistance are required. NeoRez® 1099 contains no free isocyanate, making it safer to handle than moisture c...view more NeoRez® 1099 is a very hard aromatic waterborne polyurethane polymer designed for interior applications where high performance, hardness, abrasion resistance are required. NeoRez® 1099 contains no free isocyanate, making it safer to handle than moisture cured or solvent borne two component systems. NeoRez® 1099 cures by evaporation of water and cosolvent to form tough flexible films. This product appears as a slightly amber liquid. view less | |
| BASONAT® HW 2000 | BASF Dispersions & Resins | BASONAT HW 2000 is a solvent-free, water-emulsifiable, polyfunctional isocyanate used as a hardener for polymeric dispersions containing reactive OH groups. It has excellent weather and chemical resistance, is non-yellowing and offers excellent hardness/f...view more BASONAT HW 2000 is a solvent-free, water-emulsifiable, polyfunctional isocyanate used as a hardener for polymeric dispersions containing reactive OH groups. It has excellent weather and chemical resistance, is non-yellowing and offers excellent hardness/flexibility for demanding applications. view less | Request Sample |
| Desmodur® N 3300A | Covestro | Desmodur® N 3300A is a solvent free polyfunctional aliphatic isocyanate resin based on hexamethylene diisocyanate (HDI). It should be used to formulate both clear and pigmented twocomponent polyurethane coatings where excellent weather resistance, gloss a...view more Desmodur® N 3300A is a solvent free polyfunctional aliphatic isocyanate resin based on hexamethylene diisocyanate (HDI). It should be used to formulate both clear and pigmented twocomponent polyurethane coatings where excellent weather resistance, gloss and color retention are required. Because of its low viscosity, Desmodur® N 3300A polyisocyanate is well suited for the formulation of high solids coatings. view less | |
| Solucote® 1099 | DSM Coating Resins, LLC. | Solucote® 1099 is a hard thermoplastic aromatic waterborne polyurethane polymer. It is a general-purpose polyurethane dispersion providing high abrasion resistant, tough, protective films. The resin is designed for interior coating applications on rigid s...view more Solucote® 1099 is a hard thermoplastic aromatic waterborne polyurethane polymer. It is a general-purpose polyurethane dispersion providing high abrasion resistant, tough, protective films. The resin is designed for interior coating applications on rigid substrates such as wood, plastic, concrete and metal. Solucote® 1099 contains no free isocyanate, making it safer to handle than moisture cured or solvent borne two component systems. Solucote® 1099 is pre-coalesced and room temperature film formation is achieved via evaporation of water and solvent. This product appears as a slightly amber liquid. view less | |
| BASONAT® HW 1000 | BASF Dispersions & Resins | BASONAT HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1000 is recommended for app...view more BASONAT HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1000 is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | Request Sample |
| BASONAT® HA 2000 | BASF Dispersions & Resins | BASONAT HA 2000 is a solvent-free, low viscous polyfunctional isocyanate for lightfast and weather-resistant, 2-pack polyurethane coating applications. It is used to formulate particularly lightfast and weather-resistant high solids coatings. It is solven...view more BASONAT HA 2000 is a solvent-free, low viscous polyfunctional isocyanate for lightfast and weather-resistant, 2-pack polyurethane coating applications. It is used to formulate particularly lightfast and weather-resistant high solids coatings. It is solvent free and allows for a broad range of solvent choices. For example, when less volatile solvents, as in furniture coatings, would retard drying excessively, highly volatile solvents can be chosen. Also, drying may be catalytically accelerated with, for example, dibutyl tin dilaurate. BASONAT HA 2000 is recommended for applications such as interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, and interior/exterior Automotive OEM or refinish applications. view less | Request Sample |
| BASONAT® HA 1000 | BASF Dispersions & Resins | BASONAT HA 1000 is a solvent-free, low viscous polyfunctional isocyanate for lightfast and weather-resistant, 2-pack polyurethane coating applications. It is used to formulate particularly lightfast and weather-resistant high solids coatings. It is solven...view more BASONAT HA 1000 is a solvent-free, low viscous polyfunctional isocyanate for lightfast and weather-resistant, 2-pack polyurethane coating applications. It is used to formulate particularly lightfast and weather-resistant high solids coatings. It is solvent free and allows for a broad range of solvent choices. For example, when less volatile solvents, as in furniture coatings, would retard drying excessively, highly volatile solvents can be chosen. Also, drying may be catalytically accelerated with, for example, dibutyl tin dilaurate. BASONAT HA 1000 is recommended for applications such as interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior automotive OEM or refinish applications. view less | Request Sample |
| BASONAT® HA 3000 | BASF Dispersions & Resins | BASONAT HA 3000 is a solvent-free, low viscous polyfunctional isocyanate for lightfast and weather-resistant, 2-pack polyurethane coating applications. It is used to formulate particularly lightfast and weather-resistant high solids coatings. It is solven...view more BASONAT HA 3000 is a solvent-free, low viscous polyfunctional isocyanate for lightfast and weather-resistant, 2-pack polyurethane coating applications. It is used to formulate particularly lightfast and weather-resistant high solids coatings. It is solvent free and allows for a broad range of solvent choices. For example, when less volatile solvents, as in furniture coatings, would retard drying excessively, highly volatile solvents can be chosen. Also, drying may be catalytically accelerated with, for example, dibutyl tin dilaurate. BASONAT HA 3000 is recommended for applications such as interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | Request Sample |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...view more Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). view less | |
| Hydreau® 290-4156 | Polynt Composites | Hydreau® 290-4156 is a polyester dispersion designed for 2K coating systems with low isocyanate demand, for industrial applications and specialty coatings for various substrates, HAPs-free. | |
| Tolonate™ X FLO 100 | Vencorex | Tolonate™ X FLO 100 is a partially bio-based, solvent-free and low viscosity aliphatic isocyanate polymer. It is particularly designed to product solvent-free polyurethane and polyurea materials and/or to reduce volatile organic compounds emissions of pol...view more Tolonate™ X FLO 100 is a partially bio-based, solvent-free and low viscosity aliphatic isocyanate polymer. It is particularly designed to product solvent-free polyurethane and polyurea materials and/or to reduce volatile organic compounds emissions of polyurethane solvent-based formulations. view less | |
| Polymac® 220-1001 | Polynt Composites | Polymac® 220-1001 is an extremely durable thermosetting polyester resin that is HAPs-free, designed for two-component isocyanate crosslinked system that require gloss and color retention, chemical and abrasion resistance. | |
| BYK®-331 | BYK | BYK®-331 is a polyether modified polydimethylsiloxane. This product is used in all solvent-borne, solvent-free and aqueous coatings. In two-component polyurethane systems, it can also be added to the isocyanate hardener. | Request Sample |
| Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
| ST-844 | Quaker Color (a Division of McAdoo & Allen, Inc.) | ST-844 is a solvent free, inherently dull, soft feel aliphatic urethane dispersion. ST-844 has a unique combination between soft feel, flexibility and toughness. It can be used in conjunction with isocyanate crosslinker or as is. | |
| TEGO® Protect 5000 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Protect 5000 N is a liquid, anti-graffiti additive with utmost effectiveness. It is a solvent-free, hydroxy-functional polydimethyl siloxane with good marker resistance and an anti-graffiti effect. TEGO® Protect 5000 N also has an outstanding hydro...view more TEGO® Protect 5000 N is a liquid, anti-graffiti additive with utmost effectiveness. It is a solvent-free, hydroxy-functional polydimethyl siloxane with good marker resistance and an anti-graffiti effect. TEGO® Protect 5000 N also has an outstanding hydro- and oleophobic properties for 2-pack coatings based on acrylic/isocyanate and polyester/isocyanate applications. TEGO® Protect 5000 N is dilutable by esters, ketones and glycol ethers and is recommended to be added at the grind stage in pigmented formulations. view less | Request Sample |
| Benasol UR 59 WHITE SPIRIT AROMATIC FREE | Benasedo | Benasol UR 59 WHITE SPIRIT AROMATIC FREE is used in one-component air-drying glossy and flat finishes, suggested for floors, window and door frames. This product uses vegetable oils, with a 58% oil content. It has an Aromatic isocyanate modification and w...view more Benasol UR 59 WHITE SPIRIT AROMATIC FREE is used in one-component air-drying glossy and flat finishes, suggested for floors, window and door frames. This product uses vegetable oils, with a 58% oil content. It has an Aromatic isocyanate modification and white spirit solvent. Benasol UR 59 WS has a solids content of 50%, a viscosity [G.H.] of Z2-Z4, an A.V. solids level of 1-3, and a colour [G.H.] maximum of 6. view less | |
| WorléeAdd 781 | Worlée-Chemie G.m.b.H. | WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of hi...view more WorléeAdd 781 is a silicone free leveling additive. It may be used in solved based systems such as isocyanate- and amino resin cross linking top coats to improve the levelling. In two-pack-PU-systems the addition of W´Add 781 enables the application of high film thickness with reduced blister building. view less | |
| AM-636 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistanc...view more AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistance, and flexibility. AM-636 is solvent free and features a low viscosity for ease of integration into coating. view less | |
| Polurene HR.B | S.A.P.I.C.I. SpA | Polurene HR.B is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene IR 51 AB | S.A.P.I.C.I. SpA | Polurene IR 51 AB is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Hauthane L-2883 | Hauthaway | Hauthane L-2883 is an NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X ...view more Hauthane L-2883 is an NMP-free, APEO-free, polyester-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers such as Bayer’s Bayhydur 302 or Perstorp’s Easaqua X D 401. The product, when crosslinked provides tough, chemical-resistant, semi-gloss coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. L-2883 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. view less | |
| Hauthane L-2996 | Hauthaway | Hauthane L-2996 is an NMP-free, APEO-free, polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers. The product, when crosslinked provides tough, ch...view more Hauthane L-2996 is an NMP-free, APEO-free, polycarbonate-based, hydroxyl-functional, aliphatic, water-borne polyurethane dispersion. It was developed for use with water-dispersible, isocyanate crosslinkers. The product, when crosslinked provides tough, chemical resistant, glossy coatings which may be applied to a variety of substrates including concrete, metals, plastics and wood materials. This product exhibits superior chemical resistance, while maintaining excellent flexibility and gloss retention characteristics. L-2996 crosslinked with water-dispersible isocyanates may be spray applied using single-component equipment. view less | |
| NeoRez™ R-2180 | DSM Coating Resins, LLC. | NeoRez™ R-2180 is a high performance, self crosslinking, aliphatic urethane. Designed for low VOC formulations, this environmentally friendly resin is both N-Methylpyrrolidone (NMP) and Alkylphenol Ethoxylates (NPEO) free. NeoRez™ R-2180 delivers exceptio...view more NeoRez™ R-2180 is a high performance, self crosslinking, aliphatic urethane. Designed for low VOC formulations, this environmentally friendly resin is both N-Methylpyrrolidone (NMP) and Alkylphenol Ethoxylates (NPEO) free. NeoRez™ R-2180 delivers exceptional abrasion and wear resistance in a water white finish that is well suited for use on wood flooring. NeoRez™ R-2180 is capable of being cross linked in 2K systems with isocyanate or polyfunctional aziridine. view less | |
| Polurene IR 51 AE | S.A.P.I.C.I. SpA | Polurene IR 51 AE is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers, matt topcoats, adhesives, and inks. This product contains less than .3% TDI isocyanates. | |
| CYMEL® NF 3030 | Allnex | CYMEL® NF-3030 resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with VIACRYL® SC 6834w/42WA am...view more CYMEL® NF-3030 resin is a formaldehyde-free crosslinking agent supplied in water. It was designed primarily for use in 2 component, ambient or forced cure, water-borne conversion varnishes for industrial wood when formulated with VIACRYL® SC 6834w/42WA amine-free acrylic emulsion. Resulting formulas exhibit superior catalyzed pot life relative to isocyanate-based conversion varnishes. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility. view less | Request Sample |
| Polurene HR.B.S. | S.A.P.I.C.I. SpA | Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% T...view more Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% TDI isocyanates. view less | |
| ADDITOL® VXW 6386 | Allnex | ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based...view more ADDITOL® VXW 6386 is a defoamer based on special hydrocarbons, without addition of silicone. It is qualified for following waterborne systems: stoving enamel based on alkyd or acrylic - melamine resin, 2 component acrylic - isocyanate paints, paints based on waterdilutable alkyd-resin, gloss- and semigloss dispersion paint. view less | Request Sample |
| Desmodur® N 100A | Covestro | Desmodur® N 100A is a solvent-free, aliphatic polyisocyanate (HDI biuret). | |
| MH-245 | Quaker Color (a Division of McAdoo & Allen, Inc.) | MH-245 is a high performance, low VOC aliphatic polyurethane dispersion designed for concrete coatings. MH-245 has hot tire pick up resistance when formulated as a one component coating. It can also be crosslinked with carbodiimines or isocyanate. | |
| NeoCryl® XK-541 | DSM Coating Resins, LLC. | NeoCryl® XK-541 is an aqueous anionic, hydroxyl group-containing, acrylic emulsion. This product is used in combination with appropriate hydrophilic/hydrophobic isocyanate curing agents for two component waterborne industrial finishes, suitable for use on...view more NeoCryl® XK-541 is an aqueous anionic, hydroxyl group-containing, acrylic emulsion. This product is used in combination with appropriate hydrophilic/hydrophobic isocyanate curing agents for two component waterborne industrial finishes, suitable for use on big rolling stock such as rail and commercial vehicles. NeoCryl® XK-541 has very good chemical and weathering resistance. NeoCryl® XK-541 also has very high gloss and is co-solvent free. view less | |
| Desmodur® N 3200A | Covestro | Desmodur® N 3200A is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). | |
| Polurene SB 50 AB | S.A.P.I.C.I. SpA | Polurene SB 50 AB is an isocyanurate with low free TDI content. This product has good flexibility with a long pot life. It can be used in sealers, matt and semigloss topcoats. Polurene SB 50 AB shows good solubility in aromatic solvents. It contains l...view more Polurene SB 50 AB is an isocyanurate with low free TDI content. This product has good flexibility with a long pot life. It can be used in sealers, matt and semigloss topcoats. Polurene SB 50 AB shows good solubility in aromatic solvents. It contains less than .5% TDI isocyanates. view less | |
| BASONAT® HI 100 NG | BASF Dispersions & Resins | BASONAT HI 100 NG is a solvent-free aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. | Request Sample |
| BASONAT® HI 2000 NG | BASF Dispersions & Resins | BASONAT HI 2000 NG is a solvent-free, low viscosity aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. | Request Sample |
| Polurene 3031 | S.A.P.I.C.I. SpA | Polurene 3031 is an aromatic isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curta...view more Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curtain coating and adhesive cements. view less | |
| K-KAT® XK-639 | King Industries, Inc. | K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...view more K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 50% active in isopropanol, weighs 7.6 lbs per gallon, and has a specific gravity of 0.91 g/ml. view less | |
| SETALUX® 27-1741 | Allnex | SETALUX® 27-1741 is a low VOC hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to...view more SETALUX® 27-1741 is a low VOC hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is expected to be excellent. view less | Request Sample |
| K-KAT® XK-635 | King Industries, Inc. | K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...view more K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 100% active, weighs 9.5 lbs per gallon, and has a specific gravity of 1.14 g/ml. view less | |
| Polurene 60 T | S.A.P.I.C.I. SpA | Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI ...view more Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI isocyanates. view less | |
| Duramac® 207-2012 | Polynt Composites | Duramac® 207-2012 is a high solids short oil alkyd resin for use in high solids two-package systems, compatible with isocyanates and melamines, HAPs-free. | |
| Borchi® Kat 0243 | Borchers, A Company of OMG | Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane cata...view more Borchi® Kat 0243 is a tin-free catalyst based on metal carboxylate that is used as an accelerator for solventborne two-component polyurethane coatings. It contains no organic complexing agents and is a non-hazardous replacement for other polyurethane catalysts, especially for tertiary amines and DBTL. Borchi® Kat 0243 accelerates the chemical reaction between the alcohol and isocyanate component of polyurethane coating systems, thus allowing optimum steering of the drying properties, both during force-drying and curing at room temperature. In pigmented coating systems, the catalytic activity may be reduced after prolonged storage. view less | |
| VESTANAT® T 1890/100 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® T 1890/100 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. The basic structure is the isocyanurate ring, and its NCO-functionality is between 3 and 4. It is a solvent-free material, supplied as pellets. | Request Sample |
| Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...view more Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. view less | |
| Desmodur® N 3200 | Covestro | Desmodur® N 3200 is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Coatings formulated with Desmodur® N 3200 polyisocyanate show the same final properties as those based on Desmodur® N 100. It is particularly suit...view more Desmodur® N 3200 is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Coatings formulated with Desmodur® N 3200 polyisocyanate show the same final properties as those based on Desmodur® N 100. It is particularly suitable for the formulation of high-solids two-component coating materials for a variety of applications. view less | |
| ECOPOLBACT-1 | Ecopol Tech | ECOPOLBACT-1 is an aqueous dispersion of polyurea-polyurethane microcapsules containing 2-Phenoxyethanol and Triclosan (1:1). The aliphatic polyurea-polyurethane wall of the microcapsules is formaldehyde free and other potentially hazardous substances, su...view more ECOPOLBACT-1 is an aqueous dispersion of polyurea-polyurethane microcapsules containing 2-Phenoxyethanol and Triclosan (1:1). The aliphatic polyurea-polyurethane wall of the microcapsules is formaldehyde free and other potentially hazardous substances, such as secondary amines that can produce nitrosamines. It is also free from aromatic isocyanates and amines. The level of free monomers is below detection limits. view less | |
| JONCRYL® 933 | BASF Dispersions & Resins | JONCRYL 933 is a high equivalent weight acrylic polyol designed for use in low isocyanate demand 2-component polyurethane coatings. It exhibits good pot life, adhesion, and flexibility, and should be considered as a candidate for high performance low VOC ...view more JONCRYL 933 is a high equivalent weight acrylic polyol designed for use in low isocyanate demand 2-component polyurethane coatings. It exhibits good pot life, adhesion, and flexibility, and should be considered as a candidate for high performance low VOC industrial maintenance coatings. This product is recommended for applications such as interior/exterior general metal industrial coating applications and interior/exterior automotive refinish applications. view less | Request Sample |
| Desmodur® N 100 | Covestro | Desmodur® N 100 is a solvent-free, aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Recommended for use in two-component clear and pigmented interior and exterior finishes. Coatings based on Desmodur N 100, exhibit excellent gloss...view more Desmodur® N 100 is a solvent-free, aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Recommended for use in two-component clear and pigmented interior and exterior finishes. Coatings based on Desmodur N 100, exhibit excellent gloss retention and weather resistance when formulated with proper hydroxyl-functional coreactants. These coatings also have very good resistance to solvents, chemicals, and abrasion. view less | |
| Polurene MD 1500 | S.A.P.I.C.I. SpA | Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds...view more Polurene MD 1500 is a polyfunctional polyisocyanate of 4,4-diphenylmethane diisocyanate. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like sealants, synthetic mortars, and self-leveling compounds. view less | |
| Polurene MD 1600 | S.A.P.I.C.I. SpA | Polurene MD 1600 is a polyfunctional polyisocyanate based on MDI. This product dries quickly with good flexibility. It can be used in solvent-free polyurethane coatings like adhesives, 2K primers, sealants, and self-leveling compounds. | |
| Polurene 7581 | S.A.P.I.C.I. SpA | Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in ad...view more Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in adverse weather conditions of high temperature and humidity. This product contains less than .5% TDI isocyanates. view less | |
| Desmodur® E 21 | Covestro | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned w...view more Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. view less | |
| RayCore 9506 | Specialty Polymers | RayCore 9506 is a hydroxyl functional polyurethane-acrylic core shell hybrid, designed to provide outstanding chemical, scuff, scratch and UV resistance. Features early water and chemical resistance, and can be used in concrete, metal and wood application...view more RayCore 9506 is a hydroxyl functional polyurethane-acrylic core shell hybrid, designed to provide outstanding chemical, scuff, scratch and UV resistance. Features early water and chemical resistance, and can be used in concrete, metal and wood applications It can be crosslinked with isocyanate or melamine resin systems. It has excellent adhesion to a variety of surfaces and can be formulated at low VOC. view less | |
| BASONAT® HB 100 | BASF Dispersions & Resins | BASONAT HB 100 is a solvent-free, aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior p...view more BASONAT HB 100 is a solvent-free, aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. view less | Request Sample |
| Polurene LP 1810 | S.A.P.I.C.I. SpA | Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...view more Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. view less | |
| JONCRYL® 910 | BASF Dispersions & Resins | JONCRYL 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fa...view more JONCRYL 910 is a gloss-retentive acrylic polyol designed for higher solids polyurethane coatings. This product employs a novel technology, which makes this polyol more reactive with isocyanate crosslinking agents. The result is the ability to formulate fast drying polyurethane coatings with good pot life and excellent dry time characteristics for maintenance, transportation, and other applications, at VOC levels as low as 3.2 pounds per gallon without exempt solvents. view less | Request Sample |
| Sancure™ 20025F | Lubrizol Advanced Materials, Inc. | Sancure™ 20025F is a soft elastic aliphatic polyester urethane polymer dispersion. It has very low VOC content and contains no alkylphenol ethoxylates (APEO). It is designed to be used in textile and nonwoven coating formulations for polyester and nylon f...view more Sancure™ 20025F is a soft elastic aliphatic polyester urethane polymer dispersion. It has very low VOC content and contains no alkylphenol ethoxylates (APEO). It is designed to be used in textile and nonwoven coating formulations for polyester and nylon fabrics. It can be used as a component in tie coats and laminating adhesives. Sancure 20025F can be crosslinked using melamine formaldehyde resins, isocyanate crosslinkers, polyfunctional aziridines, or carbodiimides. view less | |
| Desmodur® N 3600 | Covestro | Desmodur® N 3600 is a low viscosity solvent-free polyfunctional aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used primarily as the hardener component for light- fast two-pack polyurethane coatings with high resistance to chemi...view more Desmodur® N 3600 is a low viscosity solvent-free polyfunctional aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used primarily as the hardener component for light- fast two-pack polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. The main applications for systems based on Desmodur® N 3600 are air and force drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing and plastics. view less | |
| Desmodur® N 3800 | Covestro | Desmodur® N 3800 is a solvent free flexibilizing aliphatic polyisocyanate. In combination with suitable polyols, it can be used in the formulation of highly flexible coatings that are stable to accelerated and outdoor weathering. These can be used for coa...view more Desmodur® N 3800 is a solvent free flexibilizing aliphatic polyisocyanate. In combination with suitable polyols, it can be used in the formulation of highly flexible coatings that are stable to accelerated and outdoor weathering. These can be used for coating plastics. The use of Desmodur® N 3800 as a combination hardener component makes it possible to adjust the flexibility of the polyol mill base. The product can also be used as a flexibilizing component in other applications, e.g. stone-chip protection systems, vehicle repair systems. view less | |
| K-FLEX® XM-366 | King Industries, Inc. | K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. I...view more K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. It appears as a clear liquid that is light in color and offers good compatibility and solubility. This product is soluble in glycols, glycol ethers, alcohols, esters, aromatics, ketones, and is insoluble in aliphatic hydrocarbons and water. It can be applied in plastic coatings, aerospace, automotive OEM & refinishes, and VOC compliant systems. view less | |
| VESTANAT® B 1358/100 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1358/100 is a solvent-free, blocked polyisocyanate, based on isophorone diisocyanate (VESTANAT IPDI). It is supplied in flakes. This product is suitable for hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT® grades are al...view more VESTANAT® B 1358/100 is a solvent-free, blocked polyisocyanate, based on isophorone diisocyanate (VESTANAT IPDI). It is supplied in flakes. This product is suitable for hydroxylated resins, like polyester, acrylic and alkyd resins. VESTANAT® grades are aliphatic diisocyanate monomers for light stable PUR systems and polyisocyanate crosslinkers for high performance PUR coatings. view less | Request Sample |
| Polurene FP75 | S.A.P.I.C.I. SpA | Polurene FP75 is a polyurethane adduct with low free TDI content. This product meets EU, BFR, and FDA standards for food packaging. It can be used in 2K adhesives and inks. Polurene FP75 contains less than .5% TDI isocyanates. | |
| Ekosol ES 1500T | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1500T is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and high transparency. This product is ideal for use in direct screen printing ink applications. | |
| JONCRYL® 934 | BASF Dispersions & Resins | JONCRYL 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JON...view more JONCRYL 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JONCRYL 934 displays good cure rate and pot life. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less | Request Sample |
| Desmodur® N 3400 | Covestro | Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending ...view more Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending on the polyol used, the coatings yield tough but flexible films that can be either soft or extremely hard, have good resistance to chemicals and solvents, good weather stability and good resistance to abrasion. view less | |
| Borchi® Kat 24 | Borchers, A Company of OMG | Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexi...view more Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. view less | |
| Ekosol ES 2600 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications...view more Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications. view less | |
| Ekosol ES 2500 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applicat...view more Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applications. view less | |
| Polurene AD | S.A.P.I.C.I. SpA | Polurene AD is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. Polurene AD contains less...view more Polurene AD is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. Polurene AD contains less than .5% TDI isocyanates. view less | |
| BASONAT® HW 1180 PC | BASF Dispersions & Resins | BASONAT HW 1180 PC is a water-emulsificable, solvent-free, aliphatic polyisocyanate for crosslinking polymeric dispersions. It is an approximately 80% solids solution in propylene carbonate. BASONAT HW 1180 PC is used as a crosslinker for polymeric disper...view more BASONAT HW 1180 PC is a water-emulsificable, solvent-free, aliphatic polyisocyanate for crosslinking polymeric dispersions. It is an approximately 80% solids solution in propylene carbonate. BASONAT HW 1180 PC is used as a crosslinker for polymeric dispersions containing reactive OH groups. BASONAT HW 1180 PC is recommended for applications such as interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications and interior/exterior automotive OEM or refinish applications. view less | Request Sample |
| K-KAT® 6212 | King Industries, Inc. | K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability a...view more K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability along with a short tack free time. This product doesn't add to the hydrolysis of polyester resins and high selectivity for NCO/OH reactions over NCO/water reaction. It is soluble in esters, alcohols, ketones, aliphatic and aromatic hydrocarbons, glycol ethers, and glycol ether acetates. It is only partially soluble in water. It can be applied to adhesives, polyurethane coatings, casting resins and polyurethane resin synthesis, RIM, and water-based two component coatings. view less | |
| Ekosol ES 1000 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synth...view more Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synthetic leather coatings. view less | |
| Polurene AD 67 | S.A.P.I.C.I. SpA | Polurene AD 67 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product contains...view more Polurene AD 67 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product contains less than .5% TDI isocyanates. view less | |
| Ekosol ES 3450A | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...view more Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. view less | |
| Hartben SV 100 | Benasedo | Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of ...view more Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of < 0.3%, a color [G.H.] maximum of 1, and a viscosity [G.H.] of Z-Z3. view less | |
| Polurene AD 67 AB LV | S.A.P.I.C.I. SpA | Polurene AD 67 AB LV is a polyurethane adduct with low free TDI content. THis product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product co...view more Polurene AD 67 AB LV is a polyurethane adduct with low free TDI content. THis product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product contains less than .5% TDI isocyanates. view less | |
| Ftalon 27/70 ABT | Galstaff Multiresine S.p.A. | Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film har...view more Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film hardness (panels can be stacked after 24hrs). view less | |
| 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) | GRACE | 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the c...view more 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the catalyst. SHIELDEX® C 303 is a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. The 1-Pack-Polyurethane primer was tested on Bonder 1303 treated galvanised steel test panels (ex Chemetall) at a bar coated dry film thickness of 5 microns. Cure was to a peak metal temperature (PMT) of 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 °C. view less | |
| Ekosol ES 5300W | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...view more Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. view less | |
| Hartben A 75 | Benasedo | Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This pro...view more Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This product has a viscosity of D-I, a free monomer of < 0.5%, and NCO of 14.5-16.5, and a colour [G.H.] maximum of 1. view less | |
| Hartben AM 29 | Benasedo | Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethan...view more Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethane coatings with good colour retention, gloss, toughness and hardness. It is recommended for metals and wood. view less | |
| NECOWEL™ 720 | ASK Chemicals | NECOWEL™ 720 is a polyester polyol emulsion for the formulation of high quality 2K PU lacquers. It does not contain APEO and is free of VOC and SVOC. This product provides high gloss retention as well as an excellent scratch, chemical and weathering resis...view more NECOWEL™ 720 is a polyester polyol emulsion for the formulation of high quality 2K PU lacquers. It does not contain APEO and is free of VOC and SVOC. This product provides high gloss retention as well as an excellent scratch, chemical and weathering resistance. NECOWEL™ 720 shows a higher reactivity with isocyanates compared to NECOWEL™ 700. view less | |
| Polurene AD 72 | S.A.P.I.C.I. SpA | Polurene AD 72 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product is highe...view more Polurene AD 72 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product is higher in hardness and reactivity than a traditional adduct. It contains less than .5% TDI isocyanates. view less | |
| Hartben E 23 | Benasedo | Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast...view more Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast-curing two-component sealers and finishes, by spray or curtain coating machine application, with good "pot-life" and lifting resistance. It has a wide compatibility with nitrocellulose. view less | |
| Bayhydur® XP 7165 | Covestro | Bayhydur® XP 7165 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free, water-dispersible crosslinking agent for two-component waterborne polyurethane coatings. | |
| JONCRYL® 915 | BASF Dispersions & Resins | JONCRYL 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of JONCRYL 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink densit...view more JONCRYL 915 is an innovative acrylic oligomer for high solids polyurethane coatings featuring fast cure times. The equivalent weight of JONCRYL 915 has been maximized to provide the lowest isocyanate demand possible while maintaining good crosslink density. High solids coatings that are as low as 2.8 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. JONCRYL 915 displays outstanding viscosity characteristics without the addition of low molecular weight reactive diluents. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids polyurethane finishes. view less | Request Sample |
| W1K-1000 | US Polymers - Accurez LLC | W1K-1000 is 45% NV water reducible polyester polyol intended for use in a single package system. This polyester polyol is supplied at 45% non-volatile in water and n-Methyl Pyrrolidone. Conventional melamine or urea-formaldehyde crosslinking resins like h...view more W1K-1000 is 45% NV water reducible polyester polyol intended for use in a single package system. This polyester polyol is supplied at 45% non-volatile in water and n-Methyl Pyrrolidone. Conventional melamine or urea-formaldehyde crosslinking resins like hexamethoxy methyl melamine are recommended. The need for special melamines is not necessary. Other crosslinkers that may find use, are blocked isocyanate resins designed for water based systems. When properly formulated and processed, W1K-1000 can produce VOC compliant, melamine crosslinked baking enamels with an excellent balance of hardness , flexibility and adhesion over a variety of substrates. view less | Request Sample |
| W2K-2002 | US Polymers - Accurez LLC | W2K-2002 is 90% NV water reducible polyester polyol designed for use with aliphatic isocyanate prepolymers in the formulation of performance, two component water based urethane coatings. This polyol represents the latest introduction to our line of low VO...view more W2K-2002 is 90% NV water reducible polyester polyol designed for use with aliphatic isocyanate prepolymers in the formulation of performance, two component water based urethane coatings. This polyol represents the latest introduction to our line of low VOC polyester polyols for water based systems, and is the first to possess the formulating latitude to produce coatings with dry times and coatings comparable to conventional solvent based urethanes. In addition, this technology allows the formulator to achieve a dry film thickness of 3 – 4 mils without any of the out-gassing observed with other water based polyol technologies. view less | Request Sample |
| Picassian® AC-192 | Stahl Polymers | Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...view more Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. view less |
