UL Prospector

Success!

Successfully saved your search
161 Results
BECKOCOAT® VPU 4204/40LG Allnex Beckocoat® VPU 4204/40LG is a flat, moisture curing one-component polyurethane resin. It's used for floor sealers, wood paints and concrete impregnation sealers. Request Sample
Aldirez A Incorez Ltd. Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and...view more Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and is suitable for use with both aromatic and aliphatic prepolymers. Aldirez A inhibits CO2 generation and it allows the formulator to accelerate the cure of PU primers with a workable application potlife. view less Request Sample
Ucopol M 602 S.A.P.I.C.I. SpA Ucopol M 602 is a moisture-curing polyurethane. This product is solventless and odourless. It can be used as a primer for concrete. The end product will show good levelling and wettability.
BECKOCOAT® PU 428/51XMPAC Allnex Beckocoat® PU 428/51XMPAC is a light stabilized, oil-free, moisture curing one-component polyurethane resin. It's used in floor sealers, wood coating, concrete impregnation, and as crosslinkers for alkyd resins in two-component systems. Request Sample
Ucopol W 708 S.A.P.I.C.I. SpA Ucopol W 708 is a moisture-curing prepolymer. This product has good chemical, weather, and yellowing resistance. It can be used in wood, plastic and concrete coatings. This product has less than .5% HDI isocyanates.
Tytan S2 (Titanate Silicone Crosslinking Agent) Borica Co., Ltd. Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of sil...view more Tytan S2 is used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. It can also increase the curing rate of silicone base ink. view less
Ucopol M 33/65 K S.A.P.I.C.I. SpA Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...view more Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. view less
SiSiB® PC2710 SiSiB SILICONES SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable ureth...view more SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. view less
SiSiB® PC2720 SiSiB SILICONES SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethan...view more SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. view less
Tytan S22 (Titanate Silicone Crosslinking Agent) Borica Co., Ltd. Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rat...view more Tytan S22 is commonly used as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross linking, and as a moisture scavenger for sealants. It can also increase the curing rate of silicone base ink. view less
Quasilan CT 23 Baxenden Chemicals Ltd. Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone.
Quasilan CT 29 Baxenden Chemicals Ltd. Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone.
VESTANAT® EP-IPMS Evonik Operations GmbH, BL Crosslinkers VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...view more VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. view less Request Sample
Trixene SC 7930 Baxenden Chemicals Ltd. Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coat...view more Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coatings. view less
Ucopol M 505 S.A.P.I.C.I. SpA Ucopol M 505 is a moisture-curing prepolymer. This product has good flexibility and weather resistance. It can be used in coatings for wood, plastics, concrete, rubber, textile fabrics, and leather. This product contains less than .5% TDI isocyanates.
Ucopol M 4054 S.A.P.I.C.I. SpA Ucopol M 4054 is a moisture-curing prepolymer. This product dries quickly with good surface hardness, abrasion resistance and good brightness. It can be used in parquet or plastic coatings. This product contains less than .5% TDI isocyanates.
Tytan S6 (Titanate Silicone Crosslinking Agent) Borica Co., Ltd. Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increa...view more Tytan S6 is used commonly as an important additive in moisture curing room temperature vulcanizable (RTV) silicone sealant. It is also used as a catalyst for silane and silicone crosslinking, as well as moisture scavenging for sealants. It can also increase the curing rate of silicone base ink. view less
PChem® BM751 Pioneer Chemicals Co., Ltd. PChem® BM751, in the form of a powder, is an acrylic resin that provides good moisture curable reactive functionalities, adhesion, and chemical resistance. It is soluble in glycol ether acetates, esters, glycol ethers, ketones, aromatic, and is compatible...view more PChem® BM751, in the form of a powder, is an acrylic resin that provides good moisture curable reactive functionalities, adhesion, and chemical resistance. It is soluble in glycol ether acetates, esters, glycol ethers, ketones, aromatic, and is compatible with a extensive variety of other resins including esters, vinyl, acrylics, and is a binder for moisture curable reactive PU hot melt adhesive application especially for polyurethane adhesives. PChem® BM751 has a molecular weight of 25,000 g/mol, moisture content of equal to or less than 1.0%, acid value of less than 6.0 mgKOH/g, and an inherent viscosity of 0.13. view less
CN9302 Sartomer Americas CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture c...view more CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture cure of shadowed areas for enhanced coating performance. view less
Trixene SC 7907 Baxenden Chemicals Ltd. Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in ge...view more Trixene SC 7907 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It is a new, improved version that is non-crystallizing and stable down to -15°C in general use. view less
SPUR+ 1015 prepolymer Momentive SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and constructi...view more SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. view less Request Sample
Ucopol M 603 S.A.P.I.C.I. SpA Ucopol M 603 is a moisture-curing prepolymer. This product is solvent-free and odourless. It can be used as a primer for concrete. The end product will show good levelling and wettability. This product has a shorter cross-linking time than Ucopol M 60...view more Ucopol M 603 is a moisture-curing prepolymer. This product is solvent-free and odourless. It can be used as a primer for concrete. The end product will show good levelling and wettability. This product has a shorter cross-linking time than Ucopol M 602. view less
SPUR+ 3030 prepolymer Momentive SPUR+ 3030 prepolymer is an excellent candidate to consider for formulating non-isocyanate, moisture curable roof coatings and waterproof membranes. It was developed to enable the formulation of roof coating with a wide application window and excellent fu...view more SPUR+ 3030 prepolymer is an excellent candidate to consider for formulating non-isocyanate, moisture curable roof coatings and waterproof membranes. It was developed to enable the formulation of roof coating with a wide application window and excellent fully cured properties including tear, UV and water resistance. view less Request Sample
Ucopol M 551 S.A.P.I.C.I. SpA Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% ...view more Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. view less
Resinate® A2551-100 Polyol for Solventless 2k Adhesives Resinate Materials Group, Inc. Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. ...view more Resinate® A2551-100 is a developmental polyester polyol made with 99.9% recycled and renewable content. It is ideal for solventless 2k or moisture cure adhesive applications where superior adhesion performance on plastic and metal substrates is required. Long pot life, low viscosity, excellent water and chemical resistance. view less
Ucopol M 541 S.A.P.I.C.I. SpA Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5%...view more Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. view less
Ucopol M 33 60 Mpax S.A.P.I.C.I. SpA Ucopol M 33 60 Mpax is a moisture curing prepolymer. This product dries quickly with good hardness and flexibility. It can be used as a coating for parquet or industrial flooring applications. This product is an abrasion- and dust-resistant polyurethan...view more Ucopol M 33 60 Mpax is a moisture curing prepolymer. This product dries quickly with good hardness and flexibility. It can be used as a coating for parquet or industrial flooring applications. This product is an abrasion- and dust-resistant polyurethane coating. It contains less than .5% TDI isocyanates. view less
Ucopol M 33 60 Mpax LV S.A.P.I.C.I. SpA Ucopol M 33 60 Mpax LV is a moisture-curing prepolymer. This product dries quickly with good hardness and flexibility. It can be used as a coating for parquet or industrial flooring. This product is an abrasion- and dust-resistant polyurethane coating....view more Ucopol M 33 60 Mpax LV is a moisture-curing prepolymer. This product dries quickly with good hardness and flexibility. It can be used as a coating for parquet or industrial flooring. This product is an abrasion- and dust-resistant polyurethane coating. This product contains less than .3% TDI isocyanates. view less
Trixene SC 7906 Baxenden Chemicals Ltd. Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulati...view more Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. view less
BRB Siloen® SR 833 BRB International BV BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used...view more BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used for ambient curing heat resistant paint. (Automotive parts, industrial coatings, ovens, stoves and barbecues). view less
Hartben MC 53 Benasedo Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G....view more Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G.H.] maximum of 3, an NCO of 6.0-6.5%, and a free monomer of 1% maximum. view less
SPUR+ 1050 prepolymer Momentive SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in ind...view more SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in industrial and transportation applications where higher tensile strength is required. view less Request Sample
SPUR+ 1060 prepolymer Momentive SPUR+ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve...view more SPUR+ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve a range of applications, particularly where HAPs emissions are a significant factor. view less Request Sample
HPP-B-9627-19-60 US Polymers - Accurez LLC HPP-B-9627-19-60 is an aliphatic, hydroxy functional moisture cure polyurethane resin having free isocyanate end groups available for reaction with water from the atmosphere. This resin is ideal for concrete flooring primers and topcoats wherein excellent...view more HPP-B-9627-19-60 is an aliphatic, hydroxy functional moisture cure polyurethane resin having free isocyanate end groups available for reaction with water from the atmosphere. This resin is ideal for concrete flooring primers and topcoats wherein excellent hardness development, superb weatherability (non-yellowing) and ultra-high gloss is desirable. Excellent for use in extremely high moisture conditions. view less Request Sample
Ucopol M 2851 S.A.P.I.C.I. SpA Ucopol M 2851 is a moisture-curing prepolymer. This product is abrasion-resistant with good flexibility. It can be used as a coating for non-skid flooring applications, parquets, or gymnasium floors. In particular, it can be used as an impregnating age...view more Ucopol M 2851 is a moisture-curing prepolymer. This product is abrasion-resistant with good flexibility. It can be used as a coating for non-skid flooring applications, parquets, or gymnasium floors. In particular, it can be used as an impregnating agent in order to protect products from humidity. This product contains less than .5% TDI isocyanates. view less
SYLOSIV® A 300 Univar Solutions SYLOSIV® A 300 is a highly effective moisture scavenger for such plastic and coating systems where small traces of water may create problems. Due to its small pore openings SYLOSIV® A 300 adsorbs practically only water. Typical areas of application are tw...view more SYLOSIV® A 300 is a highly effective moisture scavenger for such plastic and coating systems where small traces of water may create problems. Due to its small pore openings SYLOSIV® A 300 adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems. view less Request Sample
VESTAMIN® IPD Evonik Operations GmbH, BL Crosslinkers VESTAMIN® IPD is a cycloaliphatic diamine, based on isophorone chemistry. It is a mixture of two stereo-isomers of 3-aminomethyl-3,5,5- trimethylcyclohexylamine, and is a colorless low viscosity liquid with a faint amine odor. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture...view more VESTAMIN® IPD is a cycloaliphatic diamine, based on isophorone chemistry. It is a mixture of two stereo-isomers of 3-aminomethyl-3,5,5- trimethylcyclohexylamine, and is a colorless low viscosity liquid with a faint amine odor. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less Request Sample
VESTAMIN® A 139 Evonik Operations GmbH, BL Crosslinkers VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reac...view more VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reacting with the isocyanate groups under formation of urea structures. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less Request Sample
SILRES® MSE 100 Wacker Chemical Corporation SILRES® MSE 100 is the methyl ester of a mixture of different oligomeric methylsilicates and is a methoxyfunctional methyl polysiloxane. It is recommended as an ambient temperature moisture-curing binder for heat resistant paints. In combination with suit...view more SILRES® MSE 100 is the methyl ester of a mixture of different oligomeric methylsilicates and is a methoxyfunctional methyl polysiloxane. It is recommended as an ambient temperature moisture-curing binder for heat resistant paints. In combination with suitable catalysts and temperature stable pigments and fillers, SILRES® MSE 100 is the optimum binder for ambient curing, heat resistant paints. It may be applied in heat-resistant coatings and metal coatings. view less Request Sample
SiSiB® PC3510 SiSiB SILICONES SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), or in waterborne coating formulations, to improve solvent, impact and mar resistance, wet and dry adhesion, also stain resistance in wood and automotive plastic coatings. view less
KANEKA SILYL® SAX260 Kaneka North America LLC KANEKA SILYL® SAX260 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX260® has performed successfully in various industrial applications and provides well-...view more KANEKA SILYL® SAX260 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX260® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA SILYL® SAX400 Kaneka North America LLC KANEKA SILYL® SAX400 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX400® has performed successfully in various industrial applications and provides well-...view more KANEKA SILYL® SAX400 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX400® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA SILYL® SAX350 Kaneka North America LLC KANEKA SILYL® SAX350 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX350® has performed successfully in various industrial applications and provides well-...view more KANEKA SILYL® SAX350 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX350® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA SILYL® SAX510 Kaneka North America LLC KANEKA SILYL® SAX510 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX510® has performed successfully in various industrial applications. SILYL SAX510® pro...view more KANEKA SILYL® SAX510 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX510® has performed successfully in various industrial applications. SILYL SAX510® provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the trimethoxysilane functional groups. view less Request Sample
KANEKA SILYL® SAX720A Kaneka North America LLC KANEKA SILYL® SAX720A is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX720A® has performed successfully in various industrial applications. SILYL SAX720A® ...view more KANEKA SILYL® SAX720A is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX720A® has performed successfully in various industrial applications. SILYL SAX720A® provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA MS POLYMER® S227 Kaneka North America LLC KANEKA MS POLYMER® S227 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S227 has performed successfully in various industrial applications and provides...view more KANEKA MS POLYMER® S227 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S227 has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
Desmodur® E 21 Covestro Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned w...view more Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. view less
KANEKA MS POLYMER® S203H Kaneka North America LLC KANEKA MS POLYMER® S203H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S203H has performed successfully in various industrial applications and provid...view more KANEKA MS POLYMER® S203H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S203H has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA MS POLYMER® S327 Kaneka North America LLC KANEKA MS POLYMER® S327 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S327 has performed successfully in various industrial applications and provides...view more KANEKA MS POLYMER® S327 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S327 has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA SILYL® MA904 Kaneka North America LLC KANEKA SILYL® MA904 is an acrylic modified Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL MA904® has performed successfully in various industrial applications an...view more KANEKA SILYL® MA904 is an acrylic modified Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL MA904® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA SILYL® MAX951 Kaneka North America LLC KANEKA SILYL® MAX951 is an acrylic modified Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL MAX951® has performed successfully in various industrial applications ...view more KANEKA SILYL® MAX951 is an acrylic modified Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL MAX951® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA MS POLYMER® S303H Kaneka North America LLC KANEKA MS POLYMER® S303H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S303H has performed successfully in various industrial applications and provid...view more KANEKA MS POLYMER® S303H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S303H has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA SILYL® SAX220 Kaneka North America LLC KANEKA SILYL® SAX220 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX220® has performed successfully in various industrial and construction applications. ...view more KANEKA SILYL® SAX220 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX220® has performed successfully in various industrial and construction applications. SILYL SAX220® provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
KANEKA SILYL® SAT115 Kaneka North America LLC KANEKA SILYL® SAT115 is a Silyl-Terminated Polyether (STPE) used as a base resin or with other KANEKA MS Polymer® as reactive diluent for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAT115® has performed successfully ...view more KANEKA SILYL® SAT115 is a Silyl-Terminated Polyether (STPE) used as a base resin or with other KANEKA MS Polymer® as reactive diluent for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAT115® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
SiSiB® PC3200 SiSiB SILICONES SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
SiSiB® PC3300 SiSiB SILICONES SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
SiSiB® PC3400 SiSiB SILICONES SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
SiSiB® PC3500 SiSiB SILICONES SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
VESTAMIN® TMD Evonik Operations GmbH, BL Crosslinkers VESTAMIN® TMD is a branched aliphatic diamine. It is a colorless liquid with approximately equal parts of the 2,2,4- and 2,4,4-trimethyl hexamethylene diamine isomers. This grade is soluble ina wide range of polar organic solvents including esters and alcohols. Typical applications include the production of hardeners for epoxy resin systems and the synthesis of polyamides and polyurethane. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture...view more VESTAMIN® TMD is a branched aliphatic diamine. It is a colorless liquid with approximately equal parts of the 2,2,4- and 2,4,4-trimethyl hexamethylene diamine isomers. This grade is soluble ina wide range of polar organic solvents including esters and alcohols. Typical applications include the production of hardeners for epoxy resin systems and the synthesis of polyamides and polyurethane. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less Request Sample
EBECRYL® 4250 Allnex EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymeriza...view more EBECRYL® 4250 is an undiluted isocyanate functional urethane acrylate designed for use as adhesion promoter in UV and EB coatings. It may be combined with hydroxyl-bearing resins to formulate coatings which cure by dual-cure process (UV-induced polymerization and NCO/OH reaction). EBECRYL® 4250 is also used in pure UV-curing coatings to improve the adhesion on critical substrates as plastic, metal, and exotic woods. EBECRYL® 4250 is suitable for the formulation of moisture-curing one-component polyurethane coatings, especially for one-component adhesion primers. view less Request Sample
NACURE® CD-2180 King Industries, Inc. NACURE® CD-2180 is a proprietary hydrophobic sulfonic acid stimulant. It is effective for the hydrolysis of siloxane functional polymers at ambient conditions. It appears as a dark brown liquid, cures at ambient circumstances, and offers great compatibili...view more NACURE® CD-2180 is a proprietary hydrophobic sulfonic acid stimulant. It is effective for the hydrolysis of siloxane functional polymers at ambient conditions. It appears as a dark brown liquid, cures at ambient circumstances, and offers great compatibility with polyethylene polymers & copolymers. This product is soluble in ketones, esters, alcohols, glycol ethers, aliphatic & aromatic hydrocarbons, and is insoluble in water. It can be used as a stimulant for silanol condensation reactions & and moisture cure of siloxane. view less
SYLOSIV® A 3 GRACE SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may crea...view more SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less
SYLOSIV® A 3 Univar Solutions SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may crea...view more SYLOSIV® A 3 is a micronized, highly porous, crystalline aluminosilicate (also called molecular sieve) with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® A 3 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are twocomponent polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less Request Sample
KANEKA SILYL® SAT010 Kaneka North America LLC KANEKA SILYL® SAT010 is a Silyl-Terminated Polyether (STPE) used as a base resin or with other KANEKA MS Polymer® as a reactive diluent for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAT010® has performed successfull...view more KANEKA SILYL® SAT010 is a Silyl-Terminated Polyether (STPE) used as a base resin or with other KANEKA MS Polymer® as a reactive diluent for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAT010® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less Request Sample
SPUR+ 1012 prepolymer Momentive SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable resin is an excellent candidate to consider in formulating construction sealants requiring rapid cure...view more SPUR+ 1012 prepolymer is a silylated prepolymer that does not rely on an isocyanate curing reactions. Additionally, it is formulated without the use of phthalate-based plasticizers, and in sealant formulations, using it as the base resin or in combination with SPUR+ 1015 prepolymer, extremely low modulus values can be attained. This moisture curable resin is an excellent candidate to consider in formulating construction sealants requiring rapid cure, good water resistance, high flexibility and adhesion to most construction substrate materials such as concrete, marble and glass. view less Request Sample
SYLOSIV® K 300 GRACE SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water ...view more SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® K 300 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less
SYLOSIV® K 300 Univar Solutions SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water ...view more SYLOSIV® K 300 is a micronized, highly porous, crystalline aluminosilicate. It is also called molecular sieve, with pore openings of approximately 3 Å. It is a highly effective moisture scavenger for plastic and coating systems where even traces of water may create problems. Due to its small pore openings SYLOSIV® K 300 Molecular Sieve Powder adsorbs practically only water. Typical areas of application are two-component polyurethane systems, moisture-curable polyurethanes, metallic pigment coatings, polysulfide and silicone systems, and as cosmetic ingredient. view less Request Sample
Sovermol® 1092 BASF Dispersions & Resins Sovermol® 1092 is a polyol that is designed to be used in combination with isocyanates as a reactive component for ductile – hard polyurethane coating and casting materials. It shows particular water repellency, which results in less sensitivity to moisture...view more Sovermol® 1092 is a polyol that is designed to be used in combination with isocyanates as a reactive component for ductile – hard polyurethane coating and casting materials. It shows particular water repellency, which results in less sensitivity to moisture while curing. view less Request Sample
KANEKA MS POLYMER® Kaneka North America LLC KANEKA MS POLYMER® is an isocyanate-free, low-VOC Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. KANEKA MS POLYMER® has performed successfully in various industrial ap...view more KANEKA MS POLYMER® is an isocyanate-free, low-VOC Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. KANEKA MS POLYMER® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the various Silane functional groups, which vary based on grade. With over 40 grades available, KANEKA MS POLYMER® is suitable for a variety of requirements. view less Request Sample
Sovermol® 1080 BASF Dispersions & Resins Sovermol® 1080 is a polyol that is designed to be used in combination with isocyanates as a reactive component for 2-pack polyurethane coatings and castings, crack bridging coatings, floor coatings and adhesives. It shows particular water repellency, which results in less sensitivity to moisture...view more Sovermol® 1080 is a polyol that is designed to be used in combination with isocyanates as a reactive component for 2-pack polyurethane coatings and castings, crack bridging coatings, floor coatings and adhesives. It shows particular water repellency, which results in less sensitivity to moisture while curing. view less Request Sample
Sovermol® 750 BASF Dispersions & Resins Sovermol® 750 is a polyol that is designed to be used in combination with isocyanates as a reactive component for 2-pack polyurethane coatings and casting materials and is suitable for UV-stable and weather-resistant coatings. It shows particular water repellency, which results in less sensitivity to moisture...view more Sovermol® 750 is a polyol that is designed to be used in combination with isocyanates as a reactive component for 2-pack polyurethane coatings and casting materials and is suitable for UV-stable and weather-resistant coatings. It shows particular water repellency, which results in less sensitivity to moisture while curing. view less Request Sample
SiSiB® PC6110 SiSiB SILICONES SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymer...view more SiSiB® PC6110, vinyltrimethoxysilane, is a colorless transparent liquid. It is used as a polymer modifier via grafting reactions; for the preparation of moisture-curing polymers, e.g. polyethylene; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers, leading to a better dispersibility, reduced melt viscosity and easier processing of filled plastics; for the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; in sealants; or for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating. view less
R32-2186 NuSil Silicone Technology 1 R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...view more R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. view less
SiSiB® PC6120 SiSiB SILICONES SiSiB® PC6120, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize resins via free radical mechanisms - copolymerization or grafting - and to modify surfaces; for the preparation of moisture-curing polymers, e.g. polyethylene; for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for various mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture...view more SiSiB® PC6120, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize resins via free radical mechanisms - copolymerization or grafting - and to modify surfaces; for the preparation of moisture-curing polymers, e.g. polyethylene; for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for various mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers; in the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; or in sealants. view less
SiSiB® PC6130 SiSiB SILICONES SiSiB® PC6130, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize resins via free radical mechanisms - copolymerization or grafting - and to modify surfaces; for the preparation of moisture-curing polymers, e.g. polyethylene; for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for various mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture...view more SiSiB® PC6130, or vinyltriethoxysilane, is a colorless transparent liquid. It is a vinyl-functional silane. It can be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group; to functionalize resins via free radical mechanisms - copolymerization or grafting - and to modify surfaces; for the preparation of moisture-curing polymers, e.g. polyethylene; for cable isolation, and sheathing mainly in low voltage applications as well as for hot water/sanitary pipes and underfloor heating; as a co-monomer for the preparation of different polymers such as polyethylene or acrylics; as an efficient adhesion promoter for various mineral-filled polymers, improving mechanical and electrical properties especially after exposure to moisture; to improve the compatibility of fillers with polymers; in the pretreatment of glass, metals, or ceramic surfaces in order to improve the adhesion of coatings on these surfaces and corrosion resistance; or in sealants. view less
R33-2186 NuSil Silicone Technology 1 R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding s...view more R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as metals and plastics. It is best used for applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F). view less
R1-2145 NuSil Silicone Technology 1 R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by si...view more R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing, This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cureview less
R-2145 NuSil Silicone Technology 1 R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by appl...view more R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cureview less
Laromer® PR 9013 BASF Dispersions & Resins Laromer® PR 9013 is an unsaturated modified dispersion oligomer used to formulate energy curable pigment concentrates and energy curable offset, flexographic, or silk-screen printing inks. Inks based on Laromer® PR 9013 are characterized by an excellent yield value even at high pigmentation levels, high gloss, excellent run-ability, little moisture expansion; they cure...view more Laromer® PR 9013 is an unsaturated modified dispersion oligomer used to formulate energy curable pigment concentrates and energy curable offset, flexographic, or silk-screen printing inks. Inks based on Laromer® PR 9013 are characterized by an excellent yield value even at high pigmentation levels, high gloss, excellent run-ability, little moisture expansion; they cure to produce low odor films. Laromer® PR 9013 can also be used to formulate coatings for paper, plastic films, metals, wood, and wood products. In energy curable coatings for wood or wood products, it reduces absorption into the substrate. Films show little shrinkage and good wetting. view less Request Sample
UV Cure 7155 Epoxies, Etc. UV Cure 7155 is a rigid, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and ...view more UV Cure 7155 is a rigid, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and thermal shock. UV Cure 7155 may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc. view less
UV Cure 7156 Epoxies, Etc. UV Cure 7156 is a Flexible, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals a...view more UV Cure 7156 is a Flexible, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and thermal shock. UV Cure 7156 may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc. view less
Ancamine® 2800 Evonik Operations GmbH, BL Crosslinkers Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulatio...view more Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulations. view less Request Sample
UV Cure 60-7155 Epoxies, Etc. UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and...view more UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and encapsulating applications. view less
Considerations for Developing Wood Coatings Ronald J. Lewarchik In this intriguing article, expert author Ronald Lewarchik discusses the development of wood coatings. He touches on moisture content, expansion and contraction, age, geometry and type of wood, resin types and curing chemistry.
VerdeCoat® WB-10 Mantrose-Haeuser VerdeCoat® WB-10 is a water, grease and moisture vapor barrier coating for paper, paper board and molded fiber food service packaging applications. It may be applied by rod, roll and flexo gravure coating methods. It can be sprayed using air or airless sy...view more VerdeCoat® WB-10 is a water, grease and moisture vapor barrier coating for paper, paper board and molded fiber food service packaging applications. It may be applied by rod, roll and flexo gravure coating methods. It can be sprayed using air or airless systems. The coated film can be dried in conventional drying systems with hot air or IR equipment. Minimum drying and curing temperature is 125 °C. Drying and curing times will depend on manufacturing line speed and drying process equipment. view less Request Sample
XHG-9179 Acid-Cure Silicone Sealant Zhejiang Wynca Chemical Industry Group XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. A...view more XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As an adhesion, it can be applied to glass such as windows, glazed surfaces, ceramic tiles, and many plastics and paints. view less
UV Cure 60-7114 Epoxies, Etc. UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...view more UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moistureview less
UV Cure 60-7170 Epoxies, Etc. UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 i...view more UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. view less
TIB KAT® 424 TIB Chemicals TIB KAT® 424 is a liquid catalyst based on an DBT-softener compound that can be applied for the curing of silicones and silane systems, especially for 1p MS silyl polymer. It is sensitive to hydrolysis, so contact with moisture must be minimized.
SiSiB® PC5131 SiSiB SILICONES SiSiB® PC5131 is a colorless clear liquid. It is an alkylalkoxysilane that hydrolyzes slowly in the presence of moisture (methanol released) to form reactive silanols, which react further to produce oligosiloxanes and then polysiloxanes. It is used main...view more SiSiB® PC5131 is a colorless clear liquid. It is an alkylalkoxysilane that hydrolyzes slowly in the presence of moisture (methanol released) to form reactive silanols, which react further to produce oligosiloxanes and then polysiloxanes. It is used mainly to render surfaces and material water repellent, but can also be used in the production of silicone resins and condensation-curing silicone rubber, and as a component in sol-gel systems. view less
UV Cure 60-7156 Epoxies, Etc. UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is wate...view more UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. view less
EPOTUF® 37-630 Polynt Composites EPOTUF® 37-630 is an accelerated amido-amine curing agent. This product cures in the presence of moisture and offers a good balance of mechanical and chemical-resistance properties. It can be used in room-temperature curing of EPOTUF® epoxy resins for coa...view more EPOTUF® 37-630 is an accelerated amido-amine curing agent. This product cures in the presence of moisture and offers a good balance of mechanical and chemical-resistance properties. It can be used in room-temperature curing of EPOTUF® epoxy resins for coatings, concrete surfacers and sealers, hand lay-up laminating, adhesives for bonding new to old concrete, and patching compounds or grouts. view less
FLEXITANE CA 6000 Univar Solutions FLEXITANE CA 6000 is a versatile performance-enhancing specialty coating additive providing enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film...view more FLEXITANE CA 6000 is a versatile performance-enhancing specialty coating additive providing enhanced pigment dispersion through displacement of monomolecular moisture, improved film integrity due to superior substrate wetting, improved cure times and film performance, and enhanced electrostatic-spray application. view less Request Sample
XHG-9159 Acid-Cure Silicone Sealant Zhejiang Wynca Chemical Industry Group XHG-9159 Acid-Cure Silicone Sealant is a one-component, acid-cure, silicone sealant with mechanical attributes and a high curing rate for construction of aquariums and other industrial applications. This product cures at room temperature with an atmospher...view more XHG-9159 Acid-Cure Silicone Sealant is a one-component, acid-cure, silicone sealant with mechanical attributes and a high curing rate for construction of aquariums and other industrial applications. This product cures at room temperature with an atmospheric moisture to become a permanently flexible silicone rubber. It is suitable for sealing of joints vulnerable to high mechanical stress, construction of aquariums which meet the DIN 32 622 bond thickness requirements and industrial applications in the construction of silos and containers. view less
UV Cure 60-7108 Epoxies, Etc. UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in...view more UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in the manufacture of electronic assemblies. Low viscosity makes it suitable for a variety of other coating applications. view less
XHG-9169 Acid-Cure Silicone Sealant Zhejiang Wynca Chemical Industry Group XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless ...view more XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless adhesion, it can be applied to most non-porous siliceous material such as glass, tiles, ceramics, enamel and glazed tiles as well as impregnated, varnished or painted wood and some plastics. view less
Michem® Emulsion 73550 Michelman Michem® Emulsion 73550 is a cationic paraffin emulsion. It is a water repellent additive used effectively for the curing and protection of concrete.
SETA H 2959 Allnex SETA H 2959 is a latent co-reactant hardner for polyisocyanates in one-component polyurethane systems. The product contains blocked amino and hydroxyl groups, which are activated by atmospheric moisture. SETA H 2959 yields formulations, which cure at room...view more SETA H 2959 is a latent co-reactant hardner for polyisocyanates in one-component polyurethane systems. The product contains blocked amino and hydroxyl groups, which are activated by atmospheric moisture. SETA H 2959 yields formulations, which cure at room temperature to form homogeneous and blister-free films, even in high thicknesses. view less Request Sample
Incozol 4 Incorez Ltd. Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it i...view more Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it is normally used with aliphatic prepolymers. In two component systems it can also be used with aromatic prepolymers or isocyanates. view less Request Sample
Anquamine® 287 Waterborne Curing Agent Evonik Operations GmbH, BL Crosslinkers Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture...view more Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. view less Request Sample
Incozol EH Incorez Ltd. Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through ...view more Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford crosslinking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios. It can also be handled and stored at temperatures as low as -15ºC without risk of crystallisation. view less Request Sample
CF19-2186 NuSil Silicone Technology 1 CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust an...view more CF19-2186 is a general purpose silicone elastomer that has a medium cure rate and is provided in mix and dispense applicators. This product can provide protection for assemblies and electronic components against, vibration, shock, ozone, moisture, dust and other contaminants. It can also be utilized as an encapsulating or potting material, and can replicate surfaces and devices. view less