UL Prospector

Success!

Successfully saved your search
198 Results
Photoinitiator 184 Jiangsu Sanmu Group Corporation Photoinitiator 184 is a UV photo initiator, which is widely used in clear coatings for wood, plastics and metal, and overprint varnish.
Photoinitiator 1173 Jiangsu Sanmu Group Corporation Photoinitiator 1173 is a UV photo initiator, which is widely used in clear coatings for wood, plastics and metal, and overprint varnish.
SONGCURE® CS 907 SONGWON Industrial Group SONGCURE® CS 907 is a photoinitiator a photoinitiator used to initiate the photopolymerisation of unsatured prepolymers.
GENOCURE* DMHA Rahn USA Corp. GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, pl...view more GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, plastic coatings, water dilutable coatings, clear coatings and pigmented coatings . view less Request Sample
GENOCURE* LBC Rahn USA Corp. GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied i...view more GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied in paper varnishes, metal varnishes, plastic coatings and water dilutable coatings. view less Request Sample
GENOCURE* BP Rahn USA Corp. GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent fo...view more GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent for photoinitiator cocktails. This product is typically applied in plastic varnishes, printing inks and varnishes and wood and industrial coatings. view less Request Sample
SONGCURE® CS TPO SONGWON Industrial Group SONGCURE® CS TPO is a free radicals solid photoinitiator with high efficiency, which can be used in varieties of coatings.
Hycure Benzoin ChemFine International Co., Ltd. Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry.
GR-1173 Hubei Gurun Technology Co., Ltd. GR-1173 is a yellowish liquid photoinitiator with high-efficiency and anti-yellowing. This product is commonly applied to overprint varnish and coatings for wood, plastics and metal.
GR-369 Hubei Gurun Technology Co., Ltd. GR-369 is a yellowish powder and photoinitiator that contains quick photocuring and high sensitivity. This product has applications offset inks, screen inks, flexo inks and inkjet inks.
GR-184 Hubei Gurun Technology Co., Ltd. GR-184 is a white powder with strong thermal stability and anti-yellowing photoinitiator. This product is commonly used in overprint varnish and coatings for wood, plastics and metal.
Speedcure BKL Lambson Group Ltd. Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers...view more Speedcure BKL is a Type I photoinitiator that forms radicals rapidly by an α cleavage mechanism that initiates the photo-polymerisation of suitable resin formulations. This white crystalline powder is compatible with most pre-polymers, resins and monomers used in UV curing industry and is a general purpose photoinitiator for inks and coatings. It can be applied to printing inks, over print varnishes, wood lacquers, adhesives as well as putties and fillers for particle and chip boards. view less
Hycure Benzil ChemFine International Co., Ltd. Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide.
GENOCURE* MBF Rahn USA Corp. GENOCURE* MBF is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* MBF is especially recommended when UV coatings are required to exhibit minimal yellowing. Request Sample
GR-907 Hubei Gurun Technology Co., Ltd. GR-907 is a white powder and a photoinitiator with quick photocuring speed, high sensitivity and low odor. This product can be applied to offset inks, screen inks, flexo inks and inkjet inks.
Doublecure® LED385 Double Bond Chemical Ind., Co., Ltd. Doublecure® LED385 is a photoinitiator specially designed for LED ink application at 385nm wavelength. Compared to TPO or 819, a lower dosage of Doublecure® LED385 can achieve better surface cure and solvent resistance.
GR-TPO Hubei Gurun Technology Co., Ltd. GR-TPO is a yellowish powder used as a photoinitiator. This product has quick photocuring speed, can be applied to thick layers of photocuring coatings, contain low-volatility, low odor and anti-yellowing.
Hycure 1173 ChemFine International Co., Ltd. Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time.
SILCOLEASE UV CATA 211 Elkem Silicones SILCOLEASE UV CATA 211 is a diaryliodonium salt in solution. It is mainly used as a photoinitiator for the polymerization of SILCOLEASE UV POLY 200 and BLUESIL UV 1 V 350.
GR-ITX Hubei Gurun Technology Co., Ltd. GR-ITX is a yellowish powder and photoinitiator that contains quick photocuring and photoinitiating. This product is for use in clear and colorful UV coating or ink, offset inks, screen inks, flexo inks and inkjet inks.
Hycure 184 ChemFine International Co., Ltd. Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time.
Speedcure EMK Lambson Group Ltd. Speedcure EMK is an efficient UV photoinitiator or hydrogen donor absorbing at 377 nm and used primarily in the electronics sector. This pale yellow solid enables a fast cure in cure resists and printing inks.
Doublecure® LBP Double Bond Chemical Ind., Co., Ltd. Doublecure® LBP is an efficient liquid photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115 and 225 generates free radicals, which can initiate polymerization of UV radiation curing systems.
Hycure BDK ChemFine International Co., Ltd. Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink.
SILCOLEASE UV POLY 110 Elkem Silicones ​SILCOLEASE UV POLY 110 UV/EB silicone system is a 100% reactive release coating chemistry based on acrylate-modified silicone copolymer technology. Instant and complete cure is achieved by simply passing the coating under either UV light (with added photoinitiator) or Electron Beam (no photoinitiator...view more ​SILCOLEASE UV POLY 110 UV/EB silicone system is a 100% reactive release coating chemistry based on acrylate-modified silicone copolymer technology. Instant and complete cure is achieved by simply passing the coating under either UV light (with added photoinitiator) or Electron Beam (no photoinitiator required). SILCOLEASEUV POLY 110 silicone polymer can be modified for "easy" and "premium" low release by blending with a release modifier, SILCOLEASE UV RCA 170. Initial and aged releases are very smooth and stable against a wide variety of adhesive materials. view less
GR-PAG-2 Hubei Gurun Technology Co., Ltd. GR-PAG-2 is a yellow brown powder and a cationic type photoinitiator with strong thermal stability, high solubility and light controllability. This product is used in cationic photocuring and chemical acid agile amplification imagery systems.
Speedcure BCIM Lambson Group Ltd. Speedcure BCIM is a photoinitiator used in radiation curing of photo-resists and printing inks. This yellow powder has a long wavelength absorption and fast cure used in photo-imaging, colour forming processes and production of resists.
SILCOLEASE UV RCA 170 Elkem Silicones SILCOLEASE UV POLY 110 UV/EB silicone system is a 100% reactive release coating chemistry based on acrylate-modified silicone copolymer technology. Instant and complete cure is achieved by simply passing the coating under either UV light (with added photoinitiator) or Electron Beam (no photoinitiator...view more SILCOLEASE UV POLY 110 UV/EB silicone system is a 100% reactive release coating chemistry based on acrylate-modified silicone copolymer technology. Instant and complete cure is achieved by simply passing the coating under either UV light (with added photoinitiator) or Electron Beam (no photoinitiator required). SILCOLEASE UV POLY 110 silicone polymer can be modified for “easy” and “premium” low release by blending with a release modifier, SILCOLEASE UV RCA 170. Initial and aged releases are very smooth and stable against a wide variety of adhesive materials. view less
Speedcure 976 Lambson Group Ltd. Speedcure 976 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in propylene carbonate. This yellow liquid enables a fast cure in inks and overprint varnishes. It is also more geared for thicker coatings and films.
GENOCURE* CPK Rahn USA Corp. GENOCURE* CPK is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* CPK is especially recommended when UV-coatings are required to exhibit only minimal yellowing even after prolonged exposure to sunlight. Request Sample
Doublecure® 73W Double Bond Chemical Ind., Co., Ltd. Doublecure® 73W is a water soluble non-yellowing photoinitiator. Such proprieties make it ideal for making photoinitiator blends or water borne UV curing. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. ...view more Doublecure® 73W is a water soluble non-yellowing photoinitiator. Such proprieties make it ideal for making photoinitiator blends or water borne UV curing. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. It is the first water solute able initiator to be used for non-yellowing clear coating. And because it is in liquid type and has good solvency properties, it is easier to handle and formulate. This yellowish to brown clear liquid is used to initiate polymerization of systems based on unsaturated acrylic monomers as reactive diluents. view less
BLUESIL PI 2074 Elkem Silicones BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems.
Doublecure® 173 Double Bond Chemical Ind., Co., Ltd. Doublecure® 173 is a liquid-type non-yellowing photoinitiator. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. Doublecure® 173, w...view more Doublecure® 173 is a liquid-type non-yellowing photoinitiator. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives. Doublecure® 173, when irradiating with UV light, undergoes a homolytic and intramolecular type of breakage to generate a pair of free radicals to initiate the olymerization of UV curable systems. It does not require hydrogen donor to initiate its radicals. However its radicals are very sensitive to oxygen in the air. This product is a light yellow to clear liquid. view less
Tiancure DETX Shanghai Tiansheng Chemical Co., Ltd. Tiancure DETX is a light yellow crystal powder that acts as a highly effective photoinitiator. This product is mainly used to initiate the photopolymerization of unsaturated prepolymers. It is recommended that it be used in UV-curing coatings and inks.
GENOCURE* BMS Rahn USA Corp. GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented ...view more GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented systems. view less Request Sample
Speedcure 976D Lambson Group Ltd. Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker ...view more Speedcure 976D is a cationic photoinitiator and a mixture of triarylsulphonium hexafluoroantimonate salts in a reactive solvent. This pale yellow transparent liquid enables a fast cure in inks and overprint varnishes and is suitable for clear and thicker coatings greater than 25μm. view less
SONGCURE® CS 819 SONGWON Industrial Group SONGCURE® CS 819 is an adaptable photoinitiator for radical polymerisation of unsaturated resins upon UV light exposure. Especially designed for white pigmented formulations, for clearcoats in outdoor use and in the curing of glass fiber polyester-styrene...view more SONGCURE® CS 819 is an adaptable photoinitiator for radical polymerisation of unsaturated resins upon UV light exposure. Especially designed for white pigmented formulations, for clearcoats in outdoor use and in the curing of glass fiber polyester-styrene system. view less
EBECRYL® LEO 10103 Allnex EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator de...view more EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL® LEO 10103 can be used for low migration over print varnishes along with flexographic and offset inks in the entire colour range, including white. EBECRYL® LEO 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure. view less Request Sample
Hycure 907 ChemFine International Co., Ltd. Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time.
GENOCURE* FMP Rahn USA Corp. GENOCURE* FMP is an Aromatic ketone, Norrish Type I photoinitiator for UV curable inks, coatings and adhesives. GENOCURE* FMP is not classified as a CMR substance and it can be used as an alternative to CMR1-classified photoinitiators such as GENOCURE* PM...view more GENOCURE* FMP is an Aromatic ketone, Norrish Type I photoinitiator for UV curable inks, coatings and adhesives. GENOCURE* FMP is not classified as a CMR substance and it can be used as an alternative to CMR1-classified photoinitiators such as GENOCURE* PMP and GENOCURE* BDMM. view less Request Sample
SILCOLEASE UV POLY 215 Elkem Silicones SILCOLEASE UV POLY 215 is a 100% reactive release coating chemistry based on epoxy silicone copolymer technology. In combination with the patented UV photoinitiator technology, it offers a highly reactive system with excellent anchorage on difficult low s...view more SILCOLEASE UV POLY 215 is a 100% reactive release coating chemistry based on epoxy silicone copolymer technology. In combination with the patented UV photoinitiator technology, it offers a highly reactive system with excellent anchorage on difficult low surface energy filmic substrates. view less
Doublecure® BP Double Bond Chemical Ind., Co., Ltd. Doublecure® BP is an efficient photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115, generates free radicals which can initiate polymerization of UV radiation curing systems. This product appears as a...view more Doublecure® BP is an efficient photoinitiator which when irradiated with UV light interacted with amine synergists such as Doublecure® 115, generates free radicals which can initiate polymerization of UV radiation curing systems. This product appears as a white to light yellow crystal or flake. view less
CN373 Sartomer Americas CN373 is a reactive amine coinitiator that can be used in combination with a hydrogen abstracting photoinitiator, such as benzophenone or isopropyl thioxanthone (ITX), to promote free radical polymerization. CN373 accelerates surface cure speed and helps ...view more CN373 is a reactive amine coinitiator that can be used in combination with a hydrogen abstracting photoinitiator, such as benzophenone or isopropyl thioxanthone (ITX), to promote free radical polymerization. CN373 accelerates surface cure speed and helps overcome oxygen inhibition in UV curable coatings and inks. view less
Speedcure ITX Lambson Group Ltd. Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decora...view more Speedcure ITX is a pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. view less
Speedcure XFe Lambson Group Ltd. Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odo...view more Speedcure XFe is a liquid photoinitiator developed for the rapid radiation curing of thick layers typically used in photo-resists and printing inks; it is used primarily in the electronics industry. A transparent pale yellow liquid, it exhibits little odour and volatility while maintaining high cure speed. view less
GENOCURE* ITX Rahn USA Corp. GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks...view more GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. view less Request Sample
Doublecure® 200 Double Bond Chemical Ind., Co., Ltd. Doublecure® 200 is a liquid-type non-yellowing photosensitizer. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives where non-yellowin...view more Doublecure® 200 is a liquid-type non-yellowing photosensitizer. Good solvency proprieties make it ideal for making photoinitiator blends. It is the initiator of choice for coating on wood, metal and plastic as well as UV-cured adhesives where non-yellowing properties are important. This product, when irradiating with UV light, undergoes both of a homolytic and intramolecular type of breakage to generate a pair of free radicals and a bimolecular hydrogen abstraction reaction to initiate the polymerization of UV curable systems. Its photospeed acting as a photoinitiator is not as fast as Doublecure® 173 for example, but it gives better non-yellowing performance and better surface curing. This product is a light yellow and clear liquid. view less
Doublecure® 107 Double Bond Chemical Ind., Co., Ltd. Doublecure® 107 is a Norrish-type Ι photoinitiator specially designed for the pigmented UV curing system. Since its introduction to market, this photoinitiator has rapidly gained its popularity in the application of UV ink and solder mask. Doublecure® 107...view more Doublecure® 107 is a Norrish-type Ι photoinitiator specially designed for the pigmented UV curing system. Since its introduction to market, this photoinitiator has rapidly gained its popularity in the application of UV ink and solder mask. Doublecure® 107, when irradiating with UV light, undergoes a homolytic and intramolecular type of breakage to generate a pair of free radicals to initiate the polymerization of UV curable systems. This white crystalline powder is strongly recommended for the pigmented UV system due to its strong absorbance (ε= 18,600 at 305 nm) in the wavelength region usually blocked by the commonly used pigments, such as TiO2 and phthalocyanine. Doublecure® 107 will not cause yellowing problems under normal conditions. view less
GENOCURE* CQ Rahn USA Corp. GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental compos...view more GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental composites, visible light curing adhesives and pigmented systems. view less Request Sample
Tiancure ITX Shanghai Tiansheng Chemical Co., Ltd. Tiancure ITX is a yellow powder that when used in combination amine synergists, acts as a highly efficient type II photoinitiator to support radical photopolymerisation of unsaturated resins. It can be used in UV curable formulations, particularly pigment...view more Tiancure ITX is a yellow powder that when used in combination amine synergists, acts as a highly efficient type II photoinitiator to support radical photopolymerisation of unsaturated resins. It can be used in UV curable formulations, particularly pigmented coatings and varnishes on wood, metal, plastic, printing inks and paper. view less
GR-FMT Hubei Gurun Technology Co., Ltd. GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV c...view more GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV coating, printing ink and adhesive. view less
GENOCURE* DETX Rahn USA Corp. GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress ink...view more GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. view less Request Sample
Speedcure 2-ITX Lambson Group Ltd. Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as wel...view more Speedcure 2-ITX is a cream to pale yellow powder and a photoinitiator which, when used with tertiary amine synergists, induces a rapid photo-polymerisation of suitable resin formulations. This product can be applied to wood varnishes, printing inks as well as decorative coatings for metal cans and food cartons. view less
Sunitor ITX Yantai Suny Chem International Co., Ltd. Sunitor ITX is a highly efficient Free Radical Type II solid photoinitiator, used to initiate the UV polymerization of chemically unsaturated pre-polymers (e.g. acrylates) in combination with tertiary amine synergists. This product is mainly used in UV cu...view more Sunitor ITX is a highly efficient Free Radical Type II solid photoinitiator, used to initiate the UV polymerization of chemically unsaturated pre-polymers (e.g. acrylates) in combination with tertiary amine synergists. This product is mainly used in UV curable, clear and pigmented systems, such as UV coatings, inks, adhesives, and photoresists. view less Request Sample
Speedcure 2959 Lambson Group Ltd. Speedcure 2959 is a reactive type I photoinitiator that induces photo-polymerisation of systems consisting of unsaturated monomers and pre-polymers when introduced to UV light. This white to off white powder can enhance compatibility in water-borne coatin...view more Speedcure 2959 is a reactive type I photoinitiator that induces photo-polymerisation of systems consisting of unsaturated monomers and pre-polymers when introduced to UV light. This white to off white powder can enhance compatibility in water-borne coatings and formulations and can be reacted with suitable functionalised unsaturated resins. view less
Speedcure XFc Lambson Group Ltd. Speedcure XFc is a liquid photoinitiator developed for use in clear coatings such as UV overprint varnishes and lacquers where fast curing and low yellowing are a pre-requisite. This transparent pale yellow liquid also has low viscosity, high reactivity a...view more Speedcure XFc is a liquid photoinitiator developed for use in clear coatings such as UV overprint varnishes and lacquers where fast curing and low yellowing are a pre-requisite. This transparent pale yellow liquid also has low viscosity, high reactivity and good solubility in many resins while exhibiting little odour. view less
GENOCURE* MBB Rahn USA Corp. GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnis...view more GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnishes, plastic varnishes, wood coatings, printing inks, industrial coatings and board varnishes. view less Request Sample
GENOCURE* TPO Rahn USA Corp. GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo in...view more GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes and letterpress inks. view less Request Sample
GENOCURE* PBZ Rahn USA Corp. GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing...view more GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing inks, wood coatings, printed circuit board and photo polymers and printing plates. view less Request Sample
PolyQ® 102 Double Bond Chemical Ind., Co., Ltd. PolyQ® 102 is an efficient reactive photoinitiator specially designed for application where odorless and improved non-migration properties are required, such as for food package coating. Its use in combination with a photoactivator such as Doublecure® 115...view more PolyQ® 102 is an efficient reactive photoinitiator specially designed for application where odorless and improved non-migration properties are required, such as for food package coating. Its use in combination with a photoactivator such as Doublecure® 115 should give results comparable to other benzophenone type initiators. This product is a benzophenone derivative oligomer. It appears as a crystalline semi-solid at room temperature. view less
GENOCURE* LBP Rahn USA Corp. GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and boa...view more GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and board varnishes, wood and industrial coatings, printing inks and varnishes and plastic varnishes. view less Request Sample
Speedcure 97 Lambson Group Ltd. Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reac...view more Speedcure 97 is a Type I photoinitiator used to initiate UV photo-polymerisation typically with unsaturated monomers and polymers such as acrylates/methacrylates or vinyl polymers. This white powder increases cure speed, provide surface core and good reactivity. It is applied to clear coatings, overprint varnishes, wood lacquers, adhesives, silicone based coatings and printing inks. view less
GENOCURE* BDK Rahn USA Corp. GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset in...view more GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates. view less Request Sample
Speedcure DETX Lambson Group Ltd. Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce prepara...view more Speedcure DETX is a photoinitiator which, when used with tertiary amine synergists, induces the rapid photo-polymerisation of suitable resin formulations. This yellow powder can provide surface cure of various films, improve ink quality and reduce preparation time in printing inks, wood varnishes, decorative coatings for metal cans and food cartons as well as adhesives. view less
GENOCURE* DEAP Rahn USA Corp. GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coa...view more GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coatings, laminating adhesives, printing inks and varnishes for plastic foils, and wood, plastic, and paper coatings. view less Request Sample
Speedcure XFd Lambson Group Ltd. Speedcure XFd is a liquid photoinitiator developed to be highly reactive in dark pigmented systems. The product induces rapid photo-polymerisation of suitable resin formulations containing acrylates, unsaturated polyesters and styrene. A transparent pale ...view more Speedcure XFd is a liquid photoinitiator developed to be highly reactive in dark pigmented systems. The product induces rapid photo-polymerisation of suitable resin formulations containing acrylates, unsaturated polyesters and styrene. A transparent pale yellow liquid, it exhibits low viscosity, high reactivity, surface and through curing in addition to being soluble in resin systems. view less
Speedcure XFs Lambson Group Ltd. Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liq...view more Speedcure XFs is a liquid photoinitiator specifically developed for use in clear coatings such as varnishes and lacquers for wood, paper, metals and plastics. It is also used in the formulation of adhesives and printing inks. A transparent pale yellow liquid, it has little odour while exhibiting non-yellowing post curing and efficient surface core. view less
GR-XBPO Hubei Gurun Technology Co., Ltd. GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV...view more GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV varnish, many coatings, adhesive, offset printing ink, screen printing ink and flexo ink. view less
GENOCURE* TPO-L Rahn USA Corp. GENOCURE* TPO-L is a phosphine oxid, liquid photoinitiator for UVcurable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* TPO-L is highly effective for high film weights. It is typically applied in offset inks and varnishes, f...view more GENOCURE* TPO-L is a phosphine oxid, liquid photoinitiator for UVcurable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* TPO-L is highly effective for high film weights. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes, letterpress inks and fillers. view less Request Sample
Speedcure 902D Lambson Group Ltd. Speedcure 902D is a benzene free cationic photoinitiator and a mixture of triarylsulphonium hexafluorophosphate salts in a glycidyl ether reactive diluent. This pale yellow transparent liquid enables good adhesion to metal substrates in addition to curing...view more Speedcure 902D is a benzene free cationic photoinitiator and a mixture of triarylsulphonium hexafluorophosphate salts in a glycidyl ether reactive diluent. This pale yellow transparent liquid enables good adhesion to metal substrates in addition to curing. It is applied to clear coatings, thin films, cycloaliphatic epoxy resins, vinyl ethers and other cationically cured materials. view less
GENOCURE* BAPO Rahn USA Corp. GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due...view more GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* BAPO shows excellent through cure in pigmented systems. view less Request Sample
Speedcure PBZ Lambson Group Ltd. Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing in...view more Speedcure PBZ is a photoinitiator, normally used with a tertiary amine synergist in the formulation of UV curable coatings. This off white powder absorbs at longer wavelengths than benzophenone which enables a faster cure. It can be applied to printing inks, wood varnishes, over print varnishes, decorative coatings for metal cans and food cartons, adhesives and metal primers. view less
Doublecure® 1190 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1190 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is id...view more Doublecure® 1190 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper. This product is a clear yellow to amber liquid. view less
Speedcure BP Lambson Group Ltd. Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibitio...view more Speedcure BP is a Type II photoinitiator that, when used with tertiary amine synergists, initiates the rapid photo-polymerisation of suitable resin formulations. These white flakes are commonly used to achieve a fast surface cure and help oxygen inhibition in printing inks, clear over print varnishes, wood varnishes, decorative coatings for metal cans and cartons as well as adhesives. view less
Speedcure TPO Lambson Group Ltd. Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick f...view more Speedcure TPO is a Type I homolytic photoinitiator, which absorbs UV light at longer wavelengths, making it suitable for curing pigmented formulations. This pale yellow crystalline powder undergoes "photo-bleaching" to make it effective for curing thick films. It is applied to wood coatings and filler, glass fibre reinforced polyester laminates, manufacture of printing plates and pigmented printing inks. view less
MIRAMER M220 Rahn USA Corp. MIRAMER M220 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coatings and paper and board varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator...view more MIRAMER M220 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coatings and paper and board varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiatorview less Request Sample
MIRAMER M222 Rahn USA Corp. MIRAMER M222 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coatings and paper and board varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator...view more MIRAMER M222 is a polyetherpolyol diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in printing inks and varnishes, overprint varnishes, wood and industrial coatings, plastic coatings and paper and board varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiatorview less Request Sample
MIRAMER M280 Rahn USA Corp. MIRAMER M280 is a polyethylenglycol 400 diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, printing inks and varnishes, wood and industrial coatings, water soluble screen inks and plastic coatings. Excellent reactivity and non-yellowing is achieved with GENOCURE* MBF as a photoinitiator...view more MIRAMER M280 is a polyethylenglycol 400 diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, printing inks and varnishes, wood and industrial coatings, water soluble screen inks and plastic coatings. Excellent reactivity and non-yellowing is achieved with GENOCURE* MBF as a photoinitiatorview less Request Sample
Doublecure® 1130 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1130 is a cationic photoinitiator based on Iodonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is idea...view more Doublecure® 1130 is a cationic photoinitiator based on Iodonium chemistry which is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV light. It is compatible with most cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper. This product is a white powder with a faint odor. view less
Doublecure® 1176 Double Bond Chemical Ind., Co., Ltd. Doublecure® 1176 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. It is compatible with most UV cationic UV systems an...view more Doublecure® 1176 is a cationic photoinitiator based on sulphonium chemistry which is used to induce the polymerization of epoxides and other cationically polymerizable materials on exposure to UV light. It is compatible with most UV cationic UV systems and is ideal for thin and clear coatings on metal, plastic, and paper substrates. This yellow liquid exhibits a very faint odor. view less
Speedcure 500 Lambson Group Ltd. Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slig...view more Speedcure 500 is a eutectic liquid mixture of a type one and a type two photoinitiator. It is used to initiate the photo-polymerisation of chemically unsaturated pre-polymers, in combination with mono- and multifunctional monomers. This colourless to slightly yellow liquid enables surface and depth cure as well as lower viscosity formulations for clear coatings, wood lacquers and printing inks. view less
Speedcure 992 Lambson Group Ltd. Speedcure 992 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluorophosphate salts in propylene carbonate. This clear, yellow to amber liquid enables good adhesion to metal substrates and has low shrinkage in addition to curing. It is...view more Speedcure 992 is a cationic photoinitiator and a mixture of triarylsulphonium hexafluorophosphate salts in propylene carbonate. This clear, yellow to amber liquid enables good adhesion to metal substrates and has low shrinkage in addition to curing. It is applied to clear coatings, thin films, cycloaliphatic epoxy resins such as UviCure S105 and UviCure S128, vinyl ethers and other cationically cured materials. view less
GENOMER* 4316 Rahn USA Corp. GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood and industrial coatings; and plastic varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator...view more GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood and industrial coatings; and plastic varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiatorview less Request Sample
SILCOLEASE UV CATA 243 Elkem Silicones SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mec...view more SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation of hybrid radical / cationic systems. view less
Sunitor 907 Yantai Suny Chem International Co., Ltd. Sunitor 907 is a versatile highly efficient Free Radical Type I solid photoinitiator, used to initiate the UV polymerization of chemically unsaturated prepolymers (e.g. acrylates) in combination with mono- or multi-functional vinyl monomers. It is particu...view more Sunitor 907 is a versatile highly efficient Free Radical Type I solid photoinitiator, used to initiate the UV polymerization of chemically unsaturated prepolymers (e.g. acrylates) in combination with mono- or multi-functional vinyl monomers. It is particularly suited to use in pigmented UV curable systems. This product is recommended for use in offset inks, screen inks, flexo inks, adhesives, photoresists, photoplates, etc. view less Request Sample
GENOMER* 4312 Rahn USA Corp. GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and plastics; wood and industrial coatings; and adhesives. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator...view more GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and plastics; wood and industrial coatings; and adhesives. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiatorview less Request Sample
MIRAMER M3130 Rahn USA Corp. MIRAMER M3130 is a polyetherpolyol triacrylate. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; plastic coatings; printing inks and varnishes; and overprint varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator...view more MIRAMER M3130 is a polyetherpolyol triacrylate. This product is recommended for use in the following applications: paper and board varnishes; wood and industrial coatings; plastic coatings; printing inks and varnishes; and overprint varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. This product is a reactive diluent for radically curable inks, coatings and varnishes. view less Request Sample
MIRAMER M320 Rahn USA Corp. MIRAMER M320 is a polyetherpolyoltriacrylate. This product is recommended for use in the following applications: paper and board finishes; wood and industrial coatings; plastic coatings; printing inks and varnishes; and overprint varnishes. It is a reactive diluent for radically curable inks, coatings and adhesives. Excellent reactivity and non-yellowing is achieved with GENOCURE* MBF as a photoinitiator...view more MIRAMER M320 is a polyetherpolyoltriacrylate. This product is recommended for use in the following applications: paper and board finishes; wood and industrial coatings; plastic coatings; printing inks and varnishes; and overprint varnishes. It is a reactive diluent for radically curable inks, coatings and adhesives. Excellent reactivity and non-yellowing is achieved with GENOCURE* MBF as a photoinitiatorview less Request Sample
GENOCURE* LTM Rahn USA Corp. GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yel...view more GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yellowing wood coatings, non yellowing coatings for plastics, non yellowing screen and decor varnishes, laminating adhesives and pressure sensitive adhesives. view less Request Sample
EBECRYL® 7100 Allnex EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an acceleratin...view more EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an accelerating effect on the UV cure speed. It is recommended for: coatings for paper and plastics, overprint varnishes, screen inks, and wood topcoats. view less Request Sample
Speedcure MBP Lambson Group Ltd. Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance cha...view more Speedcure MBP is a cost effective photoinitiator used when benzophenone free formulations are required. It is a free-flowing, easy-to-handle, low-dusting, white crystalline small-flaked material that contains the same curing efficiency and performance characteristics as benzophenone. It can be applied to printing inks, wood lacquers, over print varnishes, putties and fillers for particle and chips boards, adhesives and solder masks. view less
Speedcure 73 Lambson Group Ltd. Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and pro...view more Speedcure 73 is a Type I photoinitiator. Radicals are formed by an α cleavage mechanism and as such does not require an amine synergist to promote radical production. This clear colourless to yellowish liquid produces hard coatings with high gloss and provides good surface cure with low yellowing. It can be applied to clear coatings, overprint varnishes, wood laquers, silicone based coatings and printing inks. view less
Speedcure XKm Lambson Group Ltd. Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, i...view more Speedcure XKm is a hybrid photoinitiator that can used as a type I initiator for clear and white pigmented systems or can also be used with an amine synergist or acrylated amine in order to improve the speed of surface cure. A white to off white powder, it exhibits little yellowing, volatility and odour while curing white pigmented coatings, clear coatings and pigmented printing inks. view less
Hostatint® UV White R - Pigment White 6 Clariant Plastics and Coatings (Dispersions) Hostatint® UV White R is part of a range of pigment preparations for 100 % UV-coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photoinitiator...view more Hostatint® UV White R is part of a range of pigment preparations for 100 % UV-coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photoinitiatorview less Request Sample
Speedcure 5050 Lambson Group Ltd. Speedcure 5050 is a low migration formulated photoinitiator product that has been designed for food packaging related applications of UV overprint varnishes and lacquers where low migration as a main characteristic is required, but is applicable to low mi...view more Speedcure 5050 is a low migration formulated photoinitiator product that has been designed for food packaging related applications of UV overprint varnishes and lacquers where low migration as a main characteristic is required, but is applicable to low migration UV clear systems where non-yellowing and low odour are necessary. This transparent pale yellow liquid contains high reactivity, efficient surface curing and good solubility in resin systems. view less
Hostatint® UV Black N - Pigment 7 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Black N is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guaran- tee optimal rheological behavior and curing. The preparations do not contain any photoinitiator...view more Hostatint® UV Black N is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guaran- tee optimal rheological behavior and curing. The preparations do not contain any photoinitiatorview less Request Sample
Hostatint® UV Transoxide Yellow 2R - Pigment Yellow 42 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Transoxide Yellow 2R is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photoinitiator...view more Hostatint® UV Transoxide Yellow 2R is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photoinitiatorview less Request Sample
Hostatint® UV Yellow H3G - Pigment Yellow 154 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Yellow H3G is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guaran- tee optimal rheological behavior and curing. The preparations do not contain any photoinitiator...view more Hostatint® UV Yellow H3G is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guaran- tee optimal rheological behavior and curing. The preparations do not contain any photoinitiatorview less Request Sample
Hostatint® UV Trans Oxide Red 2B - Pigment Red 101 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Trans Oxide Red 2B is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photoinitiator...view more Hostatint® UV Trans Oxide Red 2B is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photoinitiatorview less Request Sample
GENOCURE* BDMM Rahn USA Corp. GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is...view more GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is typically used in concentrations from 0.5 to 4%. In printing inks it is often used in combination with thioxantones, aminobenzoates, benzophenones, GENOCURE* PMP, CPK and BDK. view less Request Sample