| Ancamide® 2445 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2445 Curing Agent is a modified polyamide designed to be used with liquid epoxy resin. It is a medium-viscosity curing agent which exhibits fast cure at low temperatures. This product has a low residual amine content and it gives coatings with r...view more Ancamide® 2445 Curing Agent is a modified polyamide designed to be used with liquid epoxy resin. It is a medium-viscosity curing agent which exhibits fast cure at low temperatures. This product has a low residual amine content and it gives coatings with reduced blush. The product can be used to formulate low-VOC, anti-corrosive coatings for marine, military and industrial maintenance applications. view less | Request Sample |
| Flex-Rez™ 1084AS A | Lawter | Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is...view more Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is suitable for use in flexo/gravure inks for plastics and foils and in overprint varnishes and coatings. view less | |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...view more Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. view less | |
| D.E.H.™ 24 | Univar Solutions | D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling point, and is used for maintenance paints, the manufacture of epoxyamine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide...view more D.E.H.™ 24 is an economical aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. It provides lower vapor hazard to workers due to its higher boiling point, and is used for maintenance paints, the manufacture of epoxyamine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. view less | Request Sample |
| THIXATROL® P220X - MF | Elementis | THIXATROL® P220X - MF is a 20% active, opaque pre-dispersion of a polyamide in xylene. It is easy to incorporate and can be applied in a variety of solvent-borne systems. It provides excellent thixotropy and sag control along with increased anti-settling ...view more THIXATROL® P220X - MF is a 20% active, opaque pre-dispersion of a polyamide in xylene. It is easy to incorporate and can be applied in a variety of solvent-borne systems. It provides excellent thixotropy and sag control along with increased anti-settling properties. Ideal for use in industrial maintenance coatings, refinishing topcoats and primers, marine and aerospace and heavy duty coatings, protective coatings and wood coatings. view less | Request Sample |
| FS-43 Polyamine | Epoxy Chemicals, Inc. | FS-43 Polyamine is a fast setting amine curing agent that does not contain benzyl alcohol, has virtually no odor, and damp adhesion. This product consists of 100% solids, exhibits rapid cure with low yellowing characteristics, and can be used as a reactive accelerator for polyamide...view more FS-43 Polyamine is a fast setting amine curing agent that does not contain benzyl alcohol, has virtually no odor, and damp adhesion. This product consists of 100% solids, exhibits rapid cure with low yellowing characteristics, and can be used as a reactive accelerator for polyamide, amidoamine, and cycloaliphatic amine curing agents. It is suitable for use in construction adhesives, injection resins, and hardened concrete adhesives. view less | |
| EpsilonBlack 105 | Hangzhou Epsilon Chemical Co., Ltd. | EpsilonBlack 105 is a regular coloring carbon black pigment. It is a black granular or fine powder with a blue or red undertone. It is easy to disperse, and offers good flow and jetness. This product is used in primers, powder coatings, wood coatings, offset inks, gravure solvent based inks, polyamide...view more EpsilonBlack 105 is a regular coloring carbon black pigment. It is a black granular or fine powder with a blue or red undertone. It is easy to disperse, and offers good flow and jetness. This product is used in primers, powder coatings, wood coatings, offset inks, gravure solvent based inks, polyamide inks, NC inks, CLPP inks, polyurethane inks, flexo water based inks, master batches, wire and cable. view less | |
| Pripol™ 1040 | Cargill Industrial Specialties | Pripol™ 1040 is a trimer acid building block for polyamide and epoxy modification. It is used for resin modification that brings extreme water repellency, corrosion inhibition, improved flexibility, hydrolytic stability, good flow and wetting properties, ...view more Pripol™ 1040 is a trimer acid building block for polyamide and epoxy modification. It is used for resin modification that brings extreme water repellency, corrosion inhibition, improved flexibility, hydrolytic stability, good flow and wetting properties, as well as good compatibility with other low polarity materials. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Permanent Pink FBB (3123) | Ggink International Limited | Permanent Pink FBB (3123) is a blue shade, red napthol pigment with a color index number of 12485 and a color index name of PR 146. This product provides fastness properties. Permanent Pink FBB (3123) is used in water based ink, polyvinybutyral ink, co-solvent polyamide...view more Permanent Pink FBB (3123) is a blue shade, red napthol pigment with a color index number of 12485 and a color index name of PR 146. This product provides fastness properties. Permanent Pink FBB (3123) is used in water based ink, polyvinybutyral ink, co-solvent polyamide and laroflex/Clpp ink applications. It can also be used in solvent and water based industrial paint applications. view less | |
| RESYDROL® AN 6617w/65MPP | Allnex | Resydrol® AN 6617w/65MPP is a special water dilutable Polyester-resin Solution. In combination with suitable Polyisocyanates Resydrol® AN 6617w is especially recommended for low-solvent Soft-Feel-coatings. These coatings provide excellent adhesion to different plastic substrates such as ABS, PC, ABS/PC or Polyamide...view more Resydrol® AN 6617w/65MPP is a special water dilutable Polyester-resin Solution. In combination with suitable Polyisocyanates Resydrol® AN 6617w is especially recommended for low-solvent Soft-Feel-coatings. These coatings provide excellent adhesion to different plastic substrates such as ABS, PC, ABS/PC or Polyamide. Accordingly Resydrol® AN 6617w can be used as modifier resin to improve adhesion properties of e. g. waterborne acrylic resins. view less | Request Sample |
| Pripol™ 1025 | Croda Coatings & Polymers | Pripol™ 1025 is a hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. As a resin modifier, it provides good color, water repellency, improved flexibility, thermo-oxidative stability, good flow an...view more Pripol™ 1025 is a hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. As a resin modifier, it provides good color, water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| 5454 Phthalo Blue 15:4 | Lansco Colors | 5454 Phthalo Blue 15:4 is a transparent, green shade, non-crystallizing and non-flocculating phthalocyanine blue pigment with good transparency, viscosity and gloss characteristics. 5454 Phthalo Blue 15:4 is used in solvent based ink systems such as nitrocellulose and polyamide...view more 5454 Phthalo Blue 15:4 is a transparent, green shade, non-crystallizing and non-flocculating phthalocyanine blue pigment with good transparency, viscosity and gloss characteristics. 5454 Phthalo Blue 15:4 is used in solvent based ink systems such as nitrocellulose and polyamide inks. It is also found in industrial coatings, powder coatings, automotive refinishes, epoxy coatings, solvent based tinting systems and ink jet inks. view less | |
| EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...view more EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. view less | Request Sample |
| Aptalon™ W 8062 | Lubrizol Advanced Materials, Inc. | Aptalon™ W 8062 is a 1 K water-borne, self-crosslinking polyurethane dispersion using patented polyamide polyol technology. This resin chemistry provides excellent resistance to hydrolysis, chemicals, and abrasion while still imparting superior hardness. ...view more Aptalon™ W 8062 is a 1 K water-borne, self-crosslinking polyurethane dispersion using patented polyamide polyol technology. This resin chemistry provides excellent resistance to hydrolysis, chemicals, and abrasion while still imparting superior hardness. These attributes make AptalonTM W 8062 ideal for a wide array of applications, such as high-performance wood flooring applications, as it exhibits excellent wear in high traffic areas and on sports floors. view less | |
| SEPOLSION PA150 | Sumitomo Seika America, Inc. | SEPOLSION PA150 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing the excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA150 can be applied as an adhesive on various substrates, coating ...view more SEPOLSION PA150 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing the excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA150 can be applied as an adhesive on various substrates, coating agents, and improvement additives. view less | |
| SEPOLSION PA200 | Sumitomo Seika America, Inc. | SEPOLSION PA200 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA200 can be applied as an adhesive on various substrates, coating agen...view more SEPOLSION PA200 is an aqueous emulsion mainly composed of copolyamide polymer. By utilizing excellent adhesive strength and chemical, heat resistance of copolyamide polymer, SEPOLSION PA200 can be applied as an adhesive on various substrates, coating agents, and improvement additives. view less | |
| D.E.H.™ 39 | Univar Solutions | D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide...view more D.E.H.™ 39 is a low viscosity aliphatic polyamine based on aminoethylpiperazine (AEP), providing a short pot-life and cures in minutes with liquid epoxy resins. It is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, civil engineering applications and as an accelerator for polyamide curing agents. In electrical applications, it is used for casting, potting and encapsulation. It is often used for epoxy composite materials. view less | Request Sample |
| Chisorb® 1300 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 1300 is a light and gas stabilizer for polymers. It has high affinity with NO and NO2 whose existence can cause a serious yellowing problem on the surface of polymers. Hence, Chisorb® 1300 is widely used as an anti-yellowing and anti-gas fading agent for PU, a light stabilizer for polyamide...view more Chisorb® 1300 is a light and gas stabilizer for polymers. It has high affinity with NO and NO2 whose existence can cause a serious yellowing problem on the surface of polymers. Hence, Chisorb® 1300 is widely used as an anti-yellowing and anti-gas fading agent for PU, a light stabilizer for polyamide and a heat stabilizer for polyethylene oxide systems. This product is a white crystalline powder. view less | |
| AFCONA - 5008 | AFCONA Additives Sdn Bhd | AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and or...view more AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and organically treated bentonites while decreasing pigment sedimentation. AFCONA – 5008 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| Titanate Coupling Agent HW-201 | Zhejiang Feidian Chemical Co., Ltd. | HW-201 is a yellow transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It is solu...view more HW-201 is a yellow transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It is soluble in isopropyl alcohol, xylene, toluene, mineral oil, making hydrolytic precipitation in water, innocuous non-corroding liquid, lethal dose for litter white rat being consistent with semi polar material. view less | |
| Pripol™ 1010 | Croda Coatings & Polymers | Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, im...view more Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, advanced ceramics, and industrial coating applications. view less | |
| Colorfast Yellow PG (1180P) | Ggink International Limited | Colorfast Yellow PG (1180P) is a greenish/yellow shade pigment with a Color Index number of 21290 (PY 180). This product provides high color strength, high gloss and transparency properties. Colorfast Yellow PG (1180P) is used water based ink, NC/alcohol ink, polyvinybutyral ink, co-solvent polyamide...view more Colorfast Yellow PG (1180P) is a greenish/yellow shade pigment with a Color Index number of 21290 (PY 180). This product provides high color strength, high gloss and transparency properties. Colorfast Yellow PG (1180P) is used water based ink, NC/alcohol ink, polyvinybutyral ink, co-solvent polyamide and laroflex/clpp ink applications. It is also used as a pigment, in water based, coil coating and powder industrial paint applications. view less | |
| Pripol™ 1006 F | Croda Coatings & Polymers | Pripol™ 1006 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester, and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wettin...view more Pripol™ 1006 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester, and polyamide coatings and adhesives. It provides excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, industrial coatings, and composite applications. Pripol™ 1006 F also is approved for food contact applications. view less | |
| Carmine 6BT (3164B) | Ggink International Limited | Carmine 6BT (3164B) is a transparent, bluish shade, rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides high strength, high gloss and flow properties. Carmine 6BT (3164B) is used in web offset news ink, web offset heatset ink, sheetfed ink and UV curing ink applications. It can also be used in polyvinybutyral ink, co-solvent polyamide...view more Carmine 6BT (3164B) is a transparent, bluish shade, rubine pigment with a Color Index number of 15850:1 (PR 57:1). This product provides high strength, high gloss and flow properties. Carmine 6BT (3164B) is used in web offset news ink, web offset heatset ink, sheetfed ink and UV curing ink applications. It can also be used in polyvinybutyral ink, co-solvent polyamide, publicaitons gravure and laroflex/Clpp ink applications. view less | |
| CRAYVALLAC® Optima | Arkema Rheology & Specialty Additives | CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application f...view more CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application for its smoother viscosity resulting in good compromise between levelling and sag resistance. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
| CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...view more CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| CRAYVALLAC® PA5 XSR 25 | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...view more CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less | Request Sample |
| Versamid® 100 I-70 | Gabriel Performance Products | Versamid® 100 I-70 is an iso-propanol solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 I-70 and epoxy resin systems provide long ...view more Versamid® 100 I-70 is an iso-propanol solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 I-70 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. view less | |
| Versamid® 100 T-60 | Gabriel Performance Products | Versamid® 100 T-60 is a toluene solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 T-60 and epoxy resin systems provide long pot liv...view more Versamid® 100 T-60 is a toluene solution of a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 T-60 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. view less | |
| Versamid® 253 | BASF Corporation, Chemical Intermediates | Versamid® 253 is a low viscosity polyamide resin designed for reactions with liquid or solid epoxy resins. When used with standard epoxy resins, it exhibits the same high quality properties formulators have come to expect from the Versamid® product line. ...view more Versamid® 253 is a low viscosity polyamide resin designed for reactions with liquid or solid epoxy resins. When used with standard epoxy resins, it exhibits the same high quality properties formulators have come to expect from the Versamid® product line. Versamid® 253 offers high solids capabilities, no necessary induction time, and no bloom or blush in high humidity environments. Versamid® 253 and epoxy resin systems are recommended for applications such as Industrial maintenance coating applications. view less | |
| Griltex® CT 101 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...view more Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. view less | |
| EPOTUF® 37-618 | Polynt Composites | EPOTUF® 37-618 is a polyamide curing agent in solution, based on dimerized fatty acids and poylethylene amines, which can be used in room-temperature curing of solid epoxy resins. It is designed for use in chemical and corrosion-resistant coatings, adhesi...view more EPOTUF® 37-618 is a polyamide curing agent in solution, based on dimerized fatty acids and poylethylene amines, which can be used in room-temperature curing of solid epoxy resins. It is designed for use in chemical and corrosion-resistant coatings, adhesives, electrical encapsulation, potting and casting, flooring compounds, tank coatings, and pipe coatings. This product shows good compatibility with solid epoxy resins, resulting in lower induction times, and it dries quickly. view less | |
| Pripol™ 1025 F | Croda Coatings & Polymers | Pripol™ 1025 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides water repellency, flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chem...view more Pripol™ 1025 F is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides water repellency, flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chemical resistance. This product also features good flow and wetting properties and is approved for food contact applications. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. view less | |
| Phthalo Green G (5369) | Ggink International Limited | Phthalo Green G (5369) is a transparent green pigment with a Color Index number of 74260 (PG 7). This product provides high gloss properties and is used in NC/alcohol ink, co-solvent polyamide and laroflex/Clpp ink applications. It is also used in solvent...view more Phthalo Green G (5369) is a transparent green pigment with a Color Index number of 74260 (PG 7). This product provides high gloss properties and is used in NC/alcohol ink, co-solvent polyamide and laroflex/Clpp ink applications. It is also used in solvent based, water based, coil coating and powder industrial paint applications. Phthalo Green G (5369) is also used in solvent and water based decorative paint applications and in Textile Printing. view less | |
| Permanent Orange G (1151) | Ggink International Limited | Permanent Orange G (1151) is an opaque disazopyzalone pigment with a Color Index number of 21110 (PO 5). Permanent Orange G (1151) is used in water based ink, NC/alcohol ink, polyvinybutryal ink, co-solvent polyamide and laroflex/Clpp ink applications. It...view more Permanent Orange G (1151) is an opaque disazopyzalone pigment with a Color Index number of 21110 (PO 5). Permanent Orange G (1151) is used in water based ink, NC/alcohol ink, polyvinybutryal ink, co-solvent polyamide and laroflex/Clpp ink applications. It is also used in web offset news, web offset heatset, sheetfed, UV curing and metal deco ink applications, and in solvent and water based industrial paint and textile printing applications. view less | |
| D.E.H.™ 52 | Univar Solutions | D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and m...view more D.E.H.™ 52 is a viscous aliphatic polyamine epoxy adduct curing agent combines polyamine properties such as short pot life and rapid cure at room temperature with those of typical polyamide curing agents including easy handling, convenient viscosity and mixing rates with liquid epoxy resins, however it is much less hygroscopic than standard polyamines. Applications include maintenance paints, in two-pack adhesives, civil engineering, castings and hand lay-up laminates and particularly suitable for colorless systems. view less | Request Sample |
| Titanate Coupling Agent HW-101 | Zhejiang Feidian Chemical Co., Ltd. | HW-101 is a claret transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It can als...view more HW-101 is a claret transparent thick liquid. It is used as a substrate resin for PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates, and other thermoplastic, thermosetting resins plus elastic bodies. It can also be used as inorganic fillers for CaCO3, MgCO3, BaSO4, CaSO4, MgO, Al(OH)3, talcum powder, mica powder, titanium pigment, wollastonite powder, carbon black, iron red, chrome yellow, antimony trioxide, ammonium polyphosphate, and barium metaborate. view less | |
| Pripol™ 1010 F | Croda Coatings & Polymers | Pripol™ 1010 F is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, ...view more Pripol™ 1010 F is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, industrial coatings, and composite applications. Pripol™ 1010 F also is approved for food contact applications. view less | |
| EPOTUF® 37-606 | Polynt Composites | EPOTUF® 37-606 is a modified aliphatic polyamine curing agent for room-temperature curing of epoxy resins. This product can be used in adhesives, high-solids, high-build coatings and clear high-gloss coatings, electrical potting encapsulating and castings, and decorative industrial or chemical resistant flooring. It can also be used as a modifier for polyamide...view more EPOTUF® 37-606 is a modified aliphatic polyamine curing agent for room-temperature curing of epoxy resins. This product can be used in adhesives, high-solids, high-build coatings and clear high-gloss coatings, electrical potting encapsulating and castings, and decorative industrial or chemical resistant flooring. It can also be used as a modifier for polyamide hardeners. This product features low viscosity with low color, and it cures in thin sections with a high gloss end product. view less | |
| Pigment Yellow 110 1346 CI No. PY110, Used for Paints | Shanghai Honor Industrial Co., LTD | Pigment Yellow 110, C.I. No.110 is an Isoindol pigment with C.I. 56280, with strong reddish shade. There are two different codes for paints and plastics applications. It has excellent light, weather, heat, and migration resistance. This product is widely used for metal deco paints, auto paints, and latex paints, plastics color concentrates for polypropylene, polyacrylonitrile and polyamide...view more Pigment Yellow 110, C.I. No.110 is an Isoindol pigment with C.I. 56280, with strong reddish shade. There are two different codes for paints and plastics applications. It has excellent light, weather, heat, and migration resistance. This product is widely used for metal deco paints, auto paints, and latex paints, plastics color concentrates for polypropylene, polyacrylonitrile and polyamide resins. It can also be used for different kinds of printing inks with good heat and solvent resistance properties. view less | |
| AFCONA - 5244 | AFCONA Additives Sdn Bhd | AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the ...view more AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the interfacial tension between pigments or extenders and the vehicle. AFCONA – 5244 stabilizes pigments through electrical charge repulsion forces, finding application in epoxies and polyurethane primers, UPE applications such as gel coats, buttons, SMC, and BMC, and in P VC systems. view less | |
| Phthalo Blue BGS (4382-03) | Ggink International Limited | Phthalo Blue BGS (4382-03) is a reddish/blue shade pigment with a Color Index number of 74160 (PB 15:3). This product provides heat stability and solvent resistant properties. Phthalo Blue BGS (4382-03) is used in co-solvent polyamide, publication gravure...view more Phthalo Blue BGS (4382-03) is a reddish/blue shade pigment with a Color Index number of 74160 (PB 15:3). This product provides heat stability and solvent resistant properties. Phthalo Blue BGS (4382-03) is used in co-solvent polyamide, publication gravure and laroflex/Clpp ink applications. It can also be used in OEM and refinish automotive paint, solvent based, water based, coil coating and powder industrial paint applications as well as textile printing applications. view less | |
| Fast Pink E (3810) | Ggink International Limited | Fast Pink E (3810) is a transparent, blue shade Quincacridone pigment with a Color Index Number of 73915 (PR 122). This product provides fastness properties. Fast Pink E (3810) is used in water based ink, NC/alcohol ink, polyvinybutyral ink and co-solvent polyamide...view more Fast Pink E (3810) is a transparent, blue shade Quincacridone pigment with a Color Index Number of 73915 (PR 122). This product provides fastness properties. Fast Pink E (3810) is used in water based ink, NC/alcohol ink, polyvinybutyral ink and co-solvent polyamide applications as well as in OEM and refinish automotive paint applications. It is also used solvent based, water based, coil coating and powder industrial paint applications, and solvent and water based decorative paint applications. view less | |
| Versamid® 125 | Gabriel Performance Products | Versamid® 125 is a medium viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications...view more Versamid® 125 is a medium viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 125 and epoxy resin systems are generally harder than and cure more rapidly than Versamid® 140 systems. It is often blended with Versamid® G 250 US, a fatty amido amine resin, to provide a range of viscosities, cure speeds and resistance properties. view less | |
| VINNAPAS® EP 177 | Wacker Chemical Corporation | VINNAPAS® EP 177 is an aqueous plasticizer-free, 60% dispersion of a copolymer of vinyl acetate and ethylene. It can be used in the following applications lamination of both plasticized and non plasticized, PVC, polyamide, polyurethane foam, polystyrene f...view more VINNAPAS® EP 177 is an aqueous plasticizer-free, 60% dispersion of a copolymer of vinyl acetate and ethylene. It can be used in the following applications lamination of both plasticized and non plasticized, PVC, polyamide, polyurethane foam, polystyrene foam and polyester to paper or to textile fabrics, adhesion promoter for PVC coatings, flocking adhesive for foam moldings, back coating of woven materials, needle-felt, floor-coverings and tufted carpets. It can be applied in textile and elastic flooring and wall-covers. view less | Request Sample |
| Torlon® AI-10 LM | Solvay Specialty Polymers | Torlon® AI-10 LM is a polyamide-imide (PAI) powder developed for the performance coatings industry. It is similar to Torlon® AI-10 in that it is produced using the same monomers and polymerization system. However, the manufacturing process has been optimi...view more Torlon® AI-10 LM is a polyamide-imide (PAI) powder developed for the performance coatings industry. It is similar to Torlon® AI-10 in that it is produced using the same monomers and polymerization system. However, the manufacturing process has been optimized to reduce the amount of residual methylene dianiline (MDA) monomer to below the 1000 ppm action level specified in various hazard communication regulations. The resin has superior resistance to organic solvents and a wide array of other commercial and industrial chemicals. view less | |
| Epokukdo KR-628 | Kukdo Chemical Co., Ltd. | Epokukdo KR-628 rubber modified epoxy resin that specially contains homogeneous particles of acrylic rubber core shell. It has the excellent properties in the thermal stability and the mechanical properties(break strength, flexibility strength, tensile strength, modulus of elasticity, shear adhesion strength, etc.). Especially, it offers improved and reinforced properties by using various curing agents such as anhydride acid, DICY, DDM, polyamide...view more Epokukdo KR-628 rubber modified epoxy resin that specially contains homogeneous particles of acrylic rubber core shell. It has the excellent properties in the thermal stability and the mechanical properties(break strength, flexibility strength, tensile strength, modulus of elasticity, shear adhesion strength, etc.). Especially, it offers improved and reinforced properties by using various curing agents such as anhydride acid, DICY, DDM, polyamide amine, etc. The homogeneous particle(0.5µ) of the core-shell provides the uniform properties compare to the rubber-blended epoxy resin. view less | |
| Aptalon™ M8100 | Lubrizol Advanced Materials, Inc. | Aptalon™ M8100 is a water-borne, self-crosslinking polyurethane dispersion using patented polyamide polyol technology. This resin chemistry provides excellent hydrolysis resistance, hardness, and chemical resistance that outperforms typical waterborne pol...view more Aptalon™ M8100 is a water-borne, self-crosslinking polyurethane dispersion using patented polyamide polyol technology. This resin chemistry provides excellent hydrolysis resistance, hardness, and chemical resistance that outperforms typical waterborne polyurethane chemistries. Aptalon M8100 is a 1K dispersion designed for high performance metal applications. This product will meet the performance properties of many 2K solvent-borne finishes without the need for external cross-linkers. Aptalon M8100 has no intentionally added NMP, NEP, and APEO which allows for global formulation compliance. view less | |
| Versamid® 100 | Gabriel Performance Products | Versamid® 100 is a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 and epoxy resin systems provide long pot lives and fast tack-free formulatio...view more Versamid® 100 is a semi-solid, reactive polyamide resin designed for use with solid or liquid epoxy resins for room temperature cure thermoset coating applications. Versamid® 100 and epoxy resin systems provide long pot lives and fast tack-free formulations. Formulations based on this resin system cure less quickly than Versamid® 115 systems and exhibit somewhat lower chemical and solvent resistance than Versamid® 125 coating systems. Versamid® 100 and epoxy resin systems are recommended for applications such as: Maintenance coating applications, primers, and enamel paint formulations. view less | |
| ORGASOL® 2002 D NAT 1 | Arkema | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. view less | Request Sample |
| PIGMENT YELLOW 110 1387 CI NO. PY110 | Shanghai Honor Industrial Co., LTD | Pigment Yellow 110, C.I.NO.110 is an Isoindol pigment with C.I.56280. It has a strong reddish shade. There are two different codes for paint and plastic applications. This product has perfect light fastness, as well as weather, heat, and migration resistant properties. It is widely used for metal deco paints, auto paints and latex, as well as for plastic color concentrates for polypropylene, polyacrylonitrile and polyamide...view more Pigment Yellow 110, C.I.NO.110 is an Isoindol pigment with C.I.56280. It has a strong reddish shade. There are two different codes for paint and plastic applications. This product has perfect light fastness, as well as weather, heat, and migration resistant properties. It is widely used for metal deco paints, auto paints and latex, as well as for plastic color concentrates for polypropylene, polyacrylonitrile and polyamide resins. This product is also recommended for different kinds of printing inks with good solvent and heat resistance. view less | |
| Industrial Castor Oil | Welch, Holme & Clark Co., Inc. | Industrial Castor Oil is the fixed oil attained from the seed of Ricinus Communis Linn with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for castor oil and its derivatives, including coatings, lubricating grease, emulsifiers, polyamide...view more Industrial Castor Oil is the fixed oil attained from the seed of Ricinus Communis Linn with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for castor oil and its derivatives, including coatings, lubricating grease, emulsifiers, polyamide 11 (Nylon 11) engineering plastic, sealants, inks, and more. Industrial Castor Oil has a saponification value of 176 to 184 and a viscosity of 6.3 to 8.9, with an acid value of 2.0 maximum. view less | |
| Titanate Coupling Agent HW‐102 | Zhejiang Feidian Chemical Co., Ltd. | Titanate Coupling Agent HW‐102 is isopropyl tri(dioctylphosphate) titanate, and is supplied as a yellow transparent thick liquid. It is suitable for substrate resins such as PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, ...view more Titanate Coupling Agent HW‐102 is isopropyl tri(dioctylphosphate) titanate, and is supplied as a yellow transparent thick liquid. It is suitable for substrate resins such as PE, PP, PS, P, AS, ABS, PVC, SBS, polyester, polyether, polyurethane, polyamide, polycarbonates and other thermoplastic, thermosetting resins as well as elastic bodies. This product also finds application in inorganic fillers: CaCO3, MgCO3, BaSO4, CaSO4, MgO, Al(OH)3, talcum powder, mica powder, titanium pigment, wollastonite powder, carbon black, iron red, chrome yellow, antimony trioxide, ammonium polyphosphate, barium metaborate. view less | |
| Versamid® 115 | Gabriel Performance Products | Versamid® 115 is a high viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for flexible and resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Ver...view more Versamid® 115 is a high viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for flexible and resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 115 and epoxy resin systems provide excellent resistance properties, adhesion and superior corrosion resistance. They are more solvent and chemical resistant than Versamid® 100 systems and generally dry faster than Versamid® 125 systems. Versamid® 115 and epoxy resin systems are recommended for applications such as: Maintenance coating applications, Primers, and Enamel paint formulations. view less | |
| ORGASOL® 2001 EXD NAT 1 | Arkema | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. view less | Request Sample |
| ORGASOL® 2001 UD NAT 1 | Arkema | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. view less | Request Sample |
| ORGASOL® 2002 ES3 NAT 3 | Arkema | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. view less | Request Sample |
| ORGASOL® 2002 ES4 NAT 3 | Arkema | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. view less | Request Sample |
| ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. view less | Request Sample |
| ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. view less | Request Sample |
| ORGASOL® 1002 ES5 NAT 1 | Arkema | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...view more ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. view less | Request Sample |
| Ancamide® 2891 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent b...view more Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent borne epoxy coatings, where high barrier properties and fast return to service are essential. Ancamide® 2891 Curing Agent is alkyl phenol and salicylic acid free while offering excellent Corrosion and Chemical Resistance along with good appearance. The product can be used over a broad temperature range and provides overnight cure at temperatures down to 5°C. view less | Request Sample |
| Ancamide 2634™ Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide 2634™ Curing Agent s a modified polyamide curing agent designed for use in two component solvent borne epoxy coatings where high performance and cost effectiveness are key requirements. This product offers high corrosion and chemical resistance a...view more Ancamide 2634™ Curing Agent s a modified polyamide curing agent designed for use in two component solvent borne epoxy coatings where high performance and cost effectiveness are key requirements. This product offers high corrosion and chemical resistance along with good heat resistance, cathodic disbondment resistance, high blush resistance, good flexibility and good adhesion. Ancamide 2634™ can be used over a broad temperature range. Its ability to cure at low temperatures and develop a high Tg when heat cured, makes Ancamide 2634 an excellent candidate for both low temperature and high temperature applications. view less | Request Sample |
| ORGASOL® 1002 D NAT 1 | Arkema | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...view more ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. view less | Request Sample |
| CHS-Alkyd ST 551 N 50 | Spolchemie | CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has...view more CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has as gel like structure, the aromatic content is less than 1 percent. This product is primarily used for air-drying thixotropic synthetic paints that are used for interiors and exteriors as penetrates and lacquers. It is used to prevent pigment and fillers from settling in synthetic paints. view less | |
| AFCONA - 5044 | AFCONA Additives Sdn Bhd | AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfa...view more AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing interfacial tension between pigments or extenders and the vehicle, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5044 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| Castor Oil Pale Pressed | Welch, Holme & Clark Co., Inc. | Castor Oil Pale Pressed is the fixed oil attained from the seed of Ricinus Communis Linne with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for castor oil and its derivatives, including coatings, lubricating grease, emulsifiers, polyamide...view more Castor Oil Pale Pressed is the fixed oil attained from the seed of Ricinus Communis Linne with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for castor oil and its derivatives, including coatings, lubricating grease, emulsifiers, polyamide 11 (Nylon 11) engineering plastic, sealants, inks, and more. Industrial Castor Oil has a specific gravity of 0.957 to 0.961 at 25°C, an iodine value of 83 to 88, and a hydroxyl value of 160 to 168. view less | |
| PTMG | Kowa American Corporation | PTMG (Poly(tetramethylene ether)glycol / PTMG) is a linear polyether glycol with hydroxyl groups on both ends. As a polyol, it reacts readily with isocyanates (i.e., MDI, TDI, etc.) to produce resins with excellent properties such as impact resistance, hydrolysis resistance, wear resistance, tear resistance, fungus resistance and low temperature flexibility. The Polyurethane applications are Polyurethane Elastomers, Thermoset Elastomers (TSU), Thermoplastic Elastomers (TPU), Paints and Coatings, Adhesives and Sealants, and Artificial Suede and Synthetic Leather. The Polyester Applications are Polyester Elastomers (TPEE), Polyamide...view more PTMG (Poly(tetramethylene ether)glycol / PTMG) is a linear polyether glycol with hydroxyl groups on both ends. As a polyol, it reacts readily with isocyanates (i.e., MDI, TDI, etc.) to produce resins with excellent properties such as impact resistance, hydrolysis resistance, wear resistance, tear resistance, fungus resistance and low temperature flexibility. The Polyurethane applications are Polyurethane Elastomers, Thermoset Elastomers (TSU), Thermoplastic Elastomers (TPU), Paints and Coatings, Adhesives and Sealants, and Artificial Suede and Synthetic Leather. The Polyester Applications are Polyester Elastomers (TPEE), Polyamide Applications and Polyether Amide Elastomers. view less | Request Sample |
| DOUBLEMER® 9166 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 9166 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint...view more DOUBLEMER® 9166 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint color allows for versatile adhesion promotion with various kinds of UV coatings. This product appears as a dark liquid. Formulated UV/EB curable products containing DOUBLEMER® 9166 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. It is recommeneded for use in solder resist formulations, metal coatings. plastic coatings and etch resist applications. view less | |
| Epokukdo YD-128S | Kukdo Chemical Co., Ltd. | Epokukdo YD-128S is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic...view more Epokukdo YD-128S is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128S, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128 | Kukdo Chemical Co., Ltd. | Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A. It has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128 is cured together with the various hardeners (polyamide resin, aromatic polyamine, alipha...view more Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A. It has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128 is cured together with the various hardeners (polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| ORGASOL® 2001 UD NAT 2 | Arkema | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less | Request Sample |
| ORGASOL® 2002 EXD NAT 1 | Arkema | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less | Request Sample |
| AFCONA - 5209 | AFCONA Additives Sdn Bhd | AFCONA – 5209 is a fatty acid polyamide appearing as a transparent yellow to brown liquid. This product functions as an anionic and catatonic wetting and dispersing additive to improve the wetting of pigment surfaces by preventing interfacial tension betw...view more AFCONA – 5209 is a fatty acid polyamide appearing as a transparent yellow to brown liquid. This product functions as an anionic and catatonic wetting and dispersing additive to improve the wetting of pigment surfaces by preventing interfacial tension between the hydrophilic pigments, extenders, and the binder, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5209 provides anti-settling and anti-sagging properties in bentonite gelling, and finds application in primers, decorative paints, marine paints, and heavy-duty paints, and in long, medium, and short oils, NC, TPA, acid curing, polyurethane, and epoxy systems. view less | |
| Epokukdo YD-128SH | Kukdo Chemical Co., Ltd. | Epokukdo YD-128SH is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance etc. Epokukdo YD-128SH is cured together with the various hardeners(polyamide resin, aromatic pol...view more Epokukdo YD-128SH is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance etc. Epokukdo YD-128SH is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128SH, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128SM | Kukdo Chemical Co., Ltd. | Epokukdo YD-128SM is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128SM is cured together with the various hardeners(polyamide resin, aromatic po...view more Epokukdo YD-128SM is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128SM is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128SM, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128H | Kukdo Chemical Co., Ltd. | Epokukdo YD-128H is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128H is cured together with the various hardeners(polyamide resin, aromatic poly...view more Epokukdo YD-128H is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128H is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128H, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128M | Kukdo Chemical Co., Ltd. | Epokukdo YD-128M is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128M is cured together with the various hardeners(polyamide resin, aromatic poly...view more Epokukdo YD-128M is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128M is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128M, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Epokukdo YD-128A | Kukdo Chemical Co., Ltd. | Epokukdo YD-128A is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128A is cured together with the various hardeners(polyamide resin, aromatic poly...view more Epokukdo YD-128A is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128A is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128A, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. view less | |
| Aptalon™ W8060 | Lubrizol Advanced Materials, Inc. | Aptalon™ W8060 is a water-borne, self-crosslinking polyurethane dispersion using patented AptalonTM polyamide polyol technology. Aptalon W8060 is designed for high performance wood flooring applications. Aptalon W8060 is NMP, NEP, and APEO free which allo...view more Aptalon™ W8060 is a water-borne, self-crosslinking polyurethane dispersion using patented AptalonTM polyamide polyol technology. Aptalon W8060 is designed for high performance wood flooring applications. Aptalon W8060 is NMP, NEP, and APEO free which allows for globally compliant formulations. Coating formulations made with Aptalon technology are designed to deliver very high performance properties in a 1 component system. Patented Aptalon backbone chemistry gives the resin hydrolysis resistance, hardness, and chemical resistance that out performs other waterborne polyurethane chemistries. Formulated Aptalon W8060 has performance matching or exceeding a 2K water-borne finish without the need for external cross-linkers. view less | |
| ProFlex 4 | P.A.T. Products | ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...view more ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. view less | Request Sample |
| Baybond® PU 402 A | Covestro | Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based o...view more Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 402 A are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. Baybond® PU 402 A is also very stable against shear forces. As with any product, use of Baybond® PU 402 A in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability view less | |
| Baybond® XP 2728 | Covestro | Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber...view more Baybond® XP 2728 is a anionic/non-ionic polycarbonate-polyether urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XP 2728 are characterized by their outstanding film-forming properties and very good adhesion. Baybond® XP 2728 exhibits outstanding hydrolysis resistance and colorfastness, and is also very stable against shear forces. As with any product, use of Baybond® XP 2728 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Aptalon™ W8030 | Lubrizol Advanced Materials, Inc. | Aptalon™ W8030 has a naturally low gloss that allows for the reduction or elimination of matting additives that are typically required in low gloss coatings. This resin is a water-borne, self-crosslinking, self-matting polyurethane dispersion using patented polyamide...view more Aptalon™ W8030 has a naturally low gloss that allows for the reduction or elimination of matting additives that are typically required in low gloss coatings. This resin is a water-borne, self-crosslinking, self-matting polyurethane dispersion using patented polyamide polyol technology. Aptalon W8030 provides excellent hydrolysis resistance, hardness, and chemical resistance that outperforms other water-borne polyurethane chemistries. This product is a 1K dispersion designed for high performance applications, and will meet the performance properties of many 2K solvent-borne finishes without the need for external cross-linkers. Aptalon W8030 has no intentionally added NMP, NEP, and APEO which allows for global formulation compliance. view less | |
| DOUBLEMER® 9167 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 9167 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint...view more DOUBLEMER® 9167 is an acrylate modified additive, able to significantly enhance coating adhesion to certain ‘difficult-to-coat’ substrates, i.e. metal, melamine paper, polyamide plastics. The unique properties combined with its minimal viscosity and faint color allows for versatile adhesion promotion with various kinds of UV coatings. It is also characterized by its acid functionality. This product appears as a yellowish clear liquid. Formulated UV/EB curable products containing DOUBLEMER® 9167 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. It is recommended for use in solder resist formulations, metal coatings and plastic coatings (for melamine resin and Nylon etc). view less | |
| KBE-585 | Shin-Etsu Silicones of America | KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBE-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBE-585 with a wide variety of polyamide...view more KBE-585 is a 50% methanol solution of a hydrolysable silane, 3-ureidopropyltriethoxysilane, that can significantly improve the processing and performance of many composite materials. Compared to most aminosilanes, the ureido group of KBE-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBE-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBE-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less | |
| KBM-585 | Shin-Etsu Silicones of America | KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosilanes, the ureido group of KBM-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBM-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBM-585 with a wide variety of polyamide...view more KBM-585 is a ureido functional silane coupling agent that can significantly improve the processing and performance of many composite materials. It is a 100%-active (solvent-free) hydrolysable silane, ureidopropyltrimethoxysilane. Compared to most aminosilanes, the ureido group of KBM-585 has significantly reduced basicity (near neutral pH), decreased reactivity, and improved shelf life. When used as an additive in thermoplastics and thermosets having high filler contents, such as phenolic, epoxy, polyamide, and melamine composites, KBM-585 provides better filler dispersion and lower viscosity during processing. The resultant composites also demonstrate enhanced performance. For example, the high compatibility of KBM-585 with a wide variety of polyamides improves the melt index and mechanical properties of many different filled nylon systems. view less | |
| Nubirox 106 in a Solventborne Epoxy System (Formulation #EPPA 12881) | Ferro Pigments | Formulation EPPA 12881 is an anticorrosive formulation based on a solventborne epoxy system and Nubirox 106. | |
| Chinox® 1010 | Double Bond Chemical Ind., Co., Ltd. | Chinox® 1010 is a steric hindered phenolic antioxidant with high molecular weight. Due to its specific structure and low volatility, Chinox® 1010 is characterized by its excellent anti-oxidative effect, heat stability, extraction resistance and good compatibility with resins. This product provides a wide range of applications against thermo-oxidative degradation for protecting polymers, plastics, elastomers, synthetic fibers, adhesives, oils and waxes without discoloring. Chinox® 1010 is used in polyolefins such as polyethylene, polypropylene, polybutene and other olefinic copolymers like ethylene-vinyl acetate copolymers. It is also recommended for using in polyacetal, polyamide...view more Chinox® 1010 is a steric hindered phenolic antioxidant with high molecular weight. Due to its specific structure and low volatility, Chinox® 1010 is characterized by its excellent anti-oxidative effect, heat stability, extraction resistance and good compatibility with resins. This product provides a wide range of applications against thermo-oxidative degradation for protecting polymers, plastics, elastomers, synthetic fibers, adhesives, oils and waxes without discoloring. Chinox® 1010 is used in polyolefins such as polyethylene, polypropylene, polybutene and other olefinic copolymers like ethylene-vinyl acetate copolymers. It is also recommended for using in polyacetal, polyamide and polyurethane, polyester, PVC, styrene homo and copolymers, AS, ABS, elastomers such as butyl rubber, SBR, SEBS, EPN, EPDM as well as other synthetic rubbers, adhesives, fibers, waxes etc. view less | |
| Baybond® PU 130 | Covestro | Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide...view more Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 405 | Covestro | Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide...view more Baybond® PU 405 has anionic/non-ionic cross linking polyether urethane polymer used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 405 have excellent filmforming properties, adhesion and colorfastness. This product is also highly resistant to the effects of shear forces and hydrolysis. Full mechanical properties of Baybond® PU 405 are developed by post-crosslinking for 20 minutes @ 170°C. As with any product, use of Baybond® PU 405 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide...view more EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. view less | |
| EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...view more EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. view less | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...view more HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. view less | Request Sample |
| Chisorb® 519 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 519 is a steric, monomeric hindered amine light stabilizer. The increment of color yield for pigmented polyolefins is the main characteristic of Chisorb® 519, which is superior to that of other commercialized HALS. Due to its specific structure with high molecular weight, Chisorb® 519 exhibits outstanding light stability, low volatility, high migration and extraction resistance as well as excellent anti-gas fading properties for the protection of various polymers like PP, styrenic resins etc. Chisorb® 519 also acts as an effective antioxidant and, in addition, gives significantly long-term heat stability to polyolefins. This white to light yellow granule is particularly effective in polyolefins i.e. polypropylene, polyethylene and polybutene. It is also recommended for styrene homo- and copolymers like ABS resin, PET, PBT, engineering plastics, polyurethane, polyamide...view more Chisorb® 519 is a steric, monomeric hindered amine light stabilizer. The increment of color yield for pigmented polyolefins is the main characteristic of Chisorb® 519, which is superior to that of other commercialized HALS. Due to its specific structure with high molecular weight, Chisorb® 519 exhibits outstanding light stability, low volatility, high migration and extraction resistance as well as excellent anti-gas fading properties for the protection of various polymers like PP, styrenic resins etc. Chisorb® 519 also acts as an effective antioxidant and, in addition, gives significantly long-term heat stability to polyolefins. This white to light yellow granule is particularly effective in polyolefins i.e. polypropylene, polyethylene and polybutene. It is also recommended for styrene homo- and copolymers like ABS resin, PET, PBT, engineering plastics, polyurethane, polyamide, flexible and rigid PVC, PVDC, elastomers, EPDM; PA, PET and PP fiber; adhesives, and holt melt. view less | |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide...view more EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. view less | Request Sample |
| Nubirox 213 | Ferro Pigments | Nubirox 213 is a labeling-free, beige Anticorrosive pigment. It is a multiphase Iron and Zinc Phosphate with good performance specially in solventborne epoxy and alkyd sytems. | |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| Polarite 702A | Imerys Performance Additives | Polarite 702A is a surface treated hydrous kaolin for use with polyamides to impart good dimensional stability, rigidity and impact strength. |
