Priamine 1073 | Cargill Industrial Specialties | Priamine 1073 is a low viscous dimer diamine building block for use in polyamides offering high flexibility, moisture repellency and adhesion to plastic. | |
Ancamide® 375A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 375A Curing Agent is one in a series of standard reactive polyamides designed for use in the curing of epoxy resins. It has a lower viscosity than any other member of the series, and a high imidazoline content which results in a long pot life wi...view more Ancamide® 375A Curing Agent is one in a series of standard reactive polyamides designed for use in the curing of epoxy resins. It has a lower viscosity than any other member of the series, and a high imidazoline content which results in a long pot life with liquid resins. view less | Request Sample |
Nubirox 302 | Ferro Pigments | Nubirox 302 is a zinc and labeling-free white Anticorrosive piment. it is an Organophilized Calcium Strontium Phosphosilicate with improved wetting, enhanced performance and wider binder's compatibility in solventborne and waterborne systems. | |
1,3-Diaminopropane | BASF Corporation, Chemical Intermediates | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
Sebacic Acid | Acme Hardesty Co. | Sebacic Acid is a derivative of castor oil available in technical and granular grades. It is used as a grease additive, corrosion inhibitor, alkyl resins and intermediate for nylon and polyamides. | Request Sample |
Priamine™ 1075 | Croda Coatings & Polymers | Priamine™ 1075 is for high molecular weight polyamides for high-end applications. This dimer diamine grade has a high purity, high difunctionality and low color. | |
Priamine™ 1075 | Cargill Industrial Specialties | Priamine™ 1075 is for high molecular weight polyamides for high-end applications. This dimer diamine grade has a high purity, high difunctionality and low color. | |
Priamine™ 1074 - Dimer Diamine | Cargill Industrial Specialties | Priamine™ 1074 is a low viscous dimer diamine building block for use in polyamides and polyurethane coatings and adhesives. It offers high flexibility, moisture repellency and adhesion. | |
Nubirox 106 | Ferro Pigments | Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such a...view more Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such as Coil Coatings). view less | |
VESTAMIN® TMD | Evonik Operations GmbH, BL Crosslinkers | VESTAMIN® TMD is a branched aliphatic diamine. It is a colorless liquid with approximately equal parts of the 2,2,4- and 2,4,4-trimethyl hexamethylene diamine isomers. This grade is soluble ina wide range of polar organic solvents including esters and alcohols. Typical applications include the production of hardeners for epoxy resin systems and the synthesis of polyamides and polyurethane. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamide...view more VESTAMIN® TMD is a branched aliphatic diamine. It is a colorless liquid with approximately equal parts of the 2,2,4- and 2,4,4-trimethyl hexamethylene diamine isomers. This grade is soluble ina wide range of polar organic solvents including esters and alcohols. Typical applications include the production of hardeners for epoxy resin systems and the synthesis of polyamides and polyurethane. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less | Request Sample |
Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
Ancamide® 351A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and...view more Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and superior adhesion properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. view less | Request Sample |
Polarite 902A | Imerys Performance Additives | Polarite 902A is a surface treated hydrous kaolin for use with polyamides to impart good dimensional stability, rigidity and impact strength. Can also be used in coatings applications for improved barrier and anti-corrosive properties | |
4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
ANCAMIDE® 220-IPA-73 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. | Request Sample |
Ancamide® 350A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, b...view more Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, but not exclusively with liquid epoxy resin. Applications for Anacamide® 350A include adhesives, sealants, putties, flexible cable jointing and high solids coatings. view less | Request Sample |
XTJ-542 | Huntsman Performance Products | XTJ-542 is diamine of approximately 1000 molecular weight, based on a PTMEG [poly(tetramethylene ether glycol)]/PPG (polypropylene glycol) copolymer. Polyetheramines of this type are useful in a variety of polymers, including cured epoxy resins, polyurea, and polyamide...view more XTJ-542 is diamine of approximately 1000 molecular weight, based on a PTMEG [poly(tetramethylene ether glycol)]/PPG (polypropylene glycol) copolymer. Polyetheramines of this type are useful in a variety of polymers, including cured epoxy resins, polyurea, and polyamides. view less | |
XTJ-559 | Huntsman Performance Products | XTJ-559 is diamine of approximately 1400 molecular weight, based on a PTMEG [poly(tetramethylene ether glycol)]/PPG (polypropylene glycol) copolymer. Polyetheramines of this type are useful in a variety of polymers, including cured epoxy resins, polyurea, and polyamide...view more XTJ-559 is diamine of approximately 1400 molecular weight, based on a PTMEG [poly(tetramethylene ether glycol)]/PPG (polypropylene glycol) copolymer. Polyetheramines of this type are useful in a variety of polymers, including cured epoxy resins, polyurea, and polyamides. view less | |
Isophorone diamine | BASF Corporation, Chemical Intermediates | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...view more Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. view less | |
Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamide...view more Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. view less | |
Chisorb® 1033 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 1033 is an oxalinide-based UV absorber which possesses unique properties like low initial color, neutral in nature, strong anti-oxidant ability and high affinity with metal ions. Therefore, it is ideal for applications such as polyamides, PVC, PE...view more Chisorb® 1033 is an oxalinide-based UV absorber which possesses unique properties like low initial color, neutral in nature, strong anti-oxidant ability and high affinity with metal ions. Therefore, it is ideal for applications such as polyamides, PVC, PET/PBT, and styrenic polymers. view less | |
XTJ-548 | Huntsman Performance Products | XTJ-548 is an amine of approximately 1900 average molecular weight, based on a PTMEG [poly(tetramethylene ether glycol)]. It contains a significant amount of secondary amine as well as primary amine. Polyetheramines of this type may be useful in a variety of polymers, including cured epoxy resins, polyurea, and polyamide...view more XTJ-548 is an amine of approximately 1900 average molecular weight, based on a PTMEG [poly(tetramethylene ether glycol)]. It contains a significant amount of secondary amine as well as primary amine. Polyetheramines of this type may be useful in a variety of polymers, including cured epoxy resins, polyurea, and polyamides. view less | |
Ancamide® 910 | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamide...view more Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. view less | Request Sample |
Brassylic Acid (DC13T) | Cathay Industrial Biotechnology | Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high performance polyamide...view more Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high performance polyamides/nylon, hot melt adhesives, and more. view less | |
High-Solids Epoxy | Huntsman Performance Products | Because of increasing concern for the environment and stricter governmental regulations, high-solids (i.e., low-solvent) coatings have gained importance. By using the JEFFAMINE® products in combination with the polyamides, in effect as reactive diluents, ...view more Because of increasing concern for the environment and stricter governmental regulations, high-solids (i.e., low-solvent) coatings have gained importance. By using the JEFFAMINE® products in combination with the polyamides, in effect as reactive diluents, the coatings formulator may reduce solvent levels and still maintain flexibility and other necessary coating properties. view less | |
Neopentane diamine | BASF Corporation, Chemical Intermediates | Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with ep...view more Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with epoxy resins. Due to its structure, it is less water-sensitive compared to non-branched aliphatic amines. view less | |
Undecanedioic Acid (DC11P) | Cathay Industrial Biotechnology | Undecanedioic Acid (DC11P), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)nCOOH. It has recommended applications in corrosion inhibitors, hot melt adhesives, high performance polyamide...view more Undecanedioic Acid (DC11P), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)nCOOH. It has recommended applications in corrosion inhibitors, hot melt adhesives, high performance polyamides/Nylon, and more. view less | |
Doverphos® S-480 | Dover Chemical Corporation | Doverphos® S-480 is a white free flowing powder of tris (2,4-di-t-butylphenyl) phosphite. It is a solid phosphite with excellent hydrolytic stability that can be used as a processing stabilizer for polymers to help control color and melt flow. Doverphos S-480 can also be used to stabilize polyesters, polycarbonates, polyamide...view more Doverphos® S-480 is a white free flowing powder of tris (2,4-di-t-butylphenyl) phosphite. It is a solid phosphite with excellent hydrolytic stability that can be used as a processing stabilizer for polymers to help control color and melt flow. Doverphos S-480 can also be used to stabilize polyesters, polycarbonates, polyamides, polystyrenes and elastomers. view less | |
Ethylene diamine | BASF Corporation, Chemical Intermediates | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | |
Ethylene diamine | Univar Solutions | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | Request Sample |
LUNA-CURE DMP-30 | DKSH | LUNA-CURE DMP-30 is used to accelerate the speed of the cure of epoxy resins and improve the strength of the cured material. It can also be used to catalyze acid- or anhydride curing of epoxy systems. LUNA-CURE DMP-30 also finds use as a hardening agent for polyamide...view more LUNA-CURE DMP-30 is used to accelerate the speed of the cure of epoxy resins and improve the strength of the cured material. It can also be used to catalyze acid- or anhydride curing of epoxy systems. LUNA-CURE DMP-30 also finds use as a hardening agent for polyamides, poly mercaptans, and fatty amines, and as a trimerization catalyst for polyurethanes. view less | Request Sample |
VESTAMIN® IPD | Evonik Operations GmbH, BL Crosslinkers | VESTAMIN® IPD is a cycloaliphatic diamine, based on isophorone chemistry. It is a mixture of two stereo-isomers of 3-aminomethyl-3,5,5- trimethylcyclohexylamine, and is a colorless low viscosity liquid with a faint amine odor. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamide...view more VESTAMIN® IPD is a cycloaliphatic diamine, based on isophorone chemistry. It is a mixture of two stereo-isomers of 3-aminomethyl-3,5,5- trimethylcyclohexylamine, and is a colorless low viscosity liquid with a faint amine odor. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less | Request Sample |
ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...view more ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. view less | Request Sample |
S-400-N1 (EBS Wax Powder) | Shamrock Technologies, Inc. | S-400 N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is recommended for powder, water-based, solvent-based, and UV systems. | |
S-400-N5 (EBS Wax Powder) | Shamrock Technologies, Inc. | S-400 N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
S-400-SP5 (EBS Wax Powder) | Shamrock Technologies, Inc. | S-400 SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, leather, water-based, solvent-based and UV systems. | |
3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
Anti-blocking agent ER | Yantai Suny Chem International Co., Ltd. | Anti-blocking agent ER is a white waxy solid, which is including long-chain carbon and polar amide group in molecular structure. It is not soluble in water, but can be soluble in ethanol, ether, acetone, and xylene, etc. | |
CERAFLOUR® 994 | BYK | CERAFLOUR® 994 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of ultra fine micronized amide wax. This product is used in solvent-borne systems and powder coatings. | Request Sample |
VESTAMIN® A 139 | Evonik Operations GmbH, BL Crosslinkers | VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reacting with the isocyanate groups under formation of urea structures. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamide...view more VESTAMIN® A 139 is a liquid, blocked crosslinker for polyisocyanate resins based on a cycloaliphatic diamine. The crosslinking with polyisocyanate resins occurs under the influence of moisture by releasing the original diamine, which is spontaneously reacting with the isocyanate groups under formation of urea structures. VESTAMIN® grades are curing agents for epoxy resin systems, chain extenders for polyurethane systems, raw materials for polyamides and accelerators for moisture curing PUR systems. view less | Request Sample |
CERAFLOUR® 993 | BYK | CERAFLOUR® 993 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of micronized amide wax. This product is used in solvent-borne systems and powder coatings. | Request Sample |
CERAFLOUR® 994 For Powder | BYK | CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane...view more CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. view less | Request Sample |
SuperGlide 904 | Micro Powders, Inc. | SuperGlide 904 is a unique combination of amide wax and Fischer-Tropsch wax that provides slip, scratch and block resistance with a very smooth surface feel. | |
CRAYVALLAC® PA3 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to sol...view more CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. view less | Request Sample |
CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...view more CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
CRAYVALLAC® PA4 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for p...view more CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. CRAYVALLAC® PA4 BA 20 is especially suited to coatings demanding a higher degree of surface gloss or transparency. view less | Request Sample |
CRAYVALLAC® PA4 WDA 12 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA ...view more CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA 12 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
CRAYVALLAC® PA4 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 p...view more CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
CRAYVALLAC® PA3 XAF 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres...view more CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. view less | Request Sample |
Hydrocer 145 (Amide Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 145 is an amide wax in a non-ionic aqueous dispersion. Hydrocer 145 is recommended for use in the water-based coating systems. | |
FLOWLEN SH-290 | GSI Exim America, Inc. | FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the ...view more FLOWLEN SH-290 consists of completely swollen particles of new type poly amide with a high melting point, and it is slightly soluble in organic solvents. It shows excellent anti-sagging property for thermo-setting systems and keeps the property under the baking condition. This product also shows excellent anti-settling property without strong flocculation defect. It appears in the form of a pale yellow paste. view less | |
Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
ORGASOL® 3501 EXD NAT 1 | Arkema | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...view more ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. view less | Request Sample |
ORGASOL® 3502 D NAT 1 | Arkema | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...view more ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. view less | Request Sample |
ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...view more ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. view less | Request Sample |
CRAYVALLAC® EXTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLA...view more CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximized when activation was performed at high temperatures. view less | Request Sample |
CRAYVALLAC® PA3 WDA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscos...view more CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling. view less | Request Sample |
CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL pa...view more CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. view less | Request Sample |
CERETAN A 71 | Munzing Chemie | CERETAN A 71 is a erucamide wax that is a slightly yellow fine granule. It provides good antiblocking, slip, recoatability and wet print properties, defoaming action, surface lubrication and temperature stability. It is commonly used in printing inks. | |
CERETAN A 73 | Munzing Chemie | CERETAN A 73 is a oleamide wax that is a slightly yellow fine granule. It provides good lubrication, releasing action, antiblocking, slip, and reduction of adhesion and is commonly used in printing inks, such as flexo and gravure inks. | |
CERETAN MA 7020 | Munzing Chemie | CERETAN MA 7020 is a white fine powder that is used as a matting agent, degassing agent for powder coatings and as a slip improve with anti-blocking properties. It is most commonly used in paints and coatings, such as powder, industrial, furniture and par...view more CERETAN MA 7020 is a white fine powder that is used as a matting agent, degassing agent for powder coatings and as a slip improve with anti-blocking properties. It is most commonly used in paints and coatings, such as powder, industrial, furniture and parquet coatings. view less | |
CERETAN MA 7050 | Munzing Chemie | CERETAN MA 7050 is a white fine powder. It is a texturing agent and lubricant additive, as well as a dispersing agent in lubricants. It is most commonly used in powder coatings, industrial paints, furniture, floor coatings, and pigment concentrates. | |
CERETAN MA 7150 | Munzing Chemie | CERETAN MA 7150 is a white fine powder that is a micronized erucamide wax. It is used as an anti-blocking agent, slip agent, defoamer, surface lubricant and has good recoatability and wet printing properties. It is commonly used in solvent based flexo ink...view more CERETAN MA 7150 is a white fine powder that is a micronized erucamide wax. It is used as an anti-blocking agent, slip agent, defoamer, surface lubricant and has good recoatability and wet printing properties. It is commonly used in solvent based flexo inks. view less | |
CERETAN MA 7250 | Munzing Chemie | CERETAN MA 7250 is a white fine powder that is a micronized erucamide wax. It is used as an anti-blocking agent, slip agent, defoamer, surface lubricant and has good recoatability and wet printing properties. It is commonly used in solvent based flexo ink...view more CERETAN MA 7250 is a white fine powder that is a micronized erucamide wax. It is used as an anti-blocking agent, slip agent, defoamer, surface lubricant and has good recoatability and wet printing properties. It is commonly used in solvent based flexo inks and thermosensitive paper coatings. view less | |
CERETAN MAB 7055 | Munzing Chemie | CERETAN MAB 7055 is a white fine powder that is a micronized amide wax, coated with benzoin. It is a degassing agent with no yellowing that has good adhesion, printability and provides for a low usage amount. It is commonly used as an additive for powder ...view more CERETAN MAB 7055 is a white fine powder that is a micronized amide wax, coated with benzoin. It is a degassing agent with no yellowing that has good adhesion, printability and provides for a low usage amount. It is commonly used as an additive for powder coatings. view less | |
CERETAN ME 1715 | Munzing Chemie | CERETAN ME 1715 is a white fine powder that is a spherical, micronized non-polar polyethylene wax. It has high abrasion, scratch resistance, high-melting and hardness, anti-blocking, and good temperature stability. It is commonly used in printing inks and...view more CERETAN ME 1715 is a white fine powder that is a spherical, micronized non-polar polyethylene wax. It has high abrasion, scratch resistance, high-melting and hardness, anti-blocking, and good temperature stability. It is commonly used in printing inks and paints and coatings, such as powder coatings, industrial paints, furniture and hard wood floor finishes. view less | |
RESISTHERM™ AI 244 L | Allnex | RESISTHERM® AI 244 L can be used as a binder for the formulation of one-component baking coatings with outstanding resistance to heat and chemicals. | Request Sample |
Versamid® C-30 | Gabriel Performance Products | Versamid® C-30 is a low viscosity, light colored, amine curing agent that is moisture insensitive at room temperature. It has been designed specifically for use in high solids coatings, self-leveling flooring and castings where excellent chemical resistan...view more Versamid® C-30 is a low viscosity, light colored, amine curing agent that is moisture insensitive at room temperature. It has been designed specifically for use in high solids coatings, self-leveling flooring and castings where excellent chemical resistance, good color retention and excellent flow and blush resistance are required. view less | |
Versamid® EH-30 | Gabriel Performance Products | Versamid® EH-30 is a tertiary amine accelerator and curing agent for epoxy resin systems. The anionic catalyst is a Lewis base that contains unshared electrons to facilitate opening the oxirane ring. Versamid® EH-30, a Mannich base, shows marked accelerat...view more Versamid® EH-30 is a tertiary amine accelerator and curing agent for epoxy resin systems. The anionic catalyst is a Lewis base that contains unshared electrons to facilitate opening the oxirane ring. Versamid® EH-30, a Mannich base, shows marked acceleration because of the presence of the phenolic hydroxyl. view less | |
Versamid® G-151 | Gabriel Performance Products | Versamid® G-151 is an amidoamine resin of low viscosity suitable for catalyzing both liquid and solid epoxy. It offers the same advantages as other types of amino-amides, however, Versamid® G-151 has a lower sensitivity to humidity. | |
Versamid® G-490 | Gabriel Performance Products | Versamid® G-490 is a liquid amidoamine resin designed for reaction with liquid or solid epoxy resins. It can be used as all or part of the curing agent component in high solids, adhesive, sealant, electrical potting, coating and flooring applications. | |
LH-75 | PCI Group, Inc. | LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers includi...view more LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers including nitrocellulose, acrylic, polyurethane and acid-catalyzed varnishes. It is also effective in polyester / melamine systems. It is not recommended in systems with a high level of aliphatic hydrocarbons. view less | |
CRAYVALLAC® WN-1265 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1265 is a micronised amide wax. In liquid coatings, CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of Solvent based or Water Based Wood primers and sealers. An additional advantage to be gained in this application is the a...view more CRAYVALLAC® WN-1265 is a micronised amide wax. In liquid coatings, CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of Solvent based or Water Based Wood primers and sealers. An additional advantage to be gained in this application is the absence of bloom when used in acid cured formulations. CRAYVALLAC® WN-1265 is also an effective internal lubricant for plastic compounding. In powder coatings, CRAYVALLAC® WN-1265 improves degassing properties and allows high thickness applications of HAA cured paints, even on difficult substrates. view less | Request Sample |
Luna-add RC961 | DKSH | Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This produ...view more Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This product is available in Europe, Asia and North America. view less | Request Sample |
ProFlex 8 | P.A.T. Products | ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamide...view more ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. view less | Request Sample |
N,N-Dimethyl acrylamide (DMAA) | Kowa American Corporation | N,N-Dimethylacrylamide (DMAA) offers glass and polycarbonate adhesion, increased hydrolytic stability, excellent optical properties, improved hydrolytic resistance in water soluble polymers and is a good viscosity modifier for hydrophilic formulations. DM...view more N,N-Dimethylacrylamide (DMAA) offers glass and polycarbonate adhesion, increased hydrolytic stability, excellent optical properties, improved hydrolytic resistance in water soluble polymers and is a good viscosity modifier for hydrophilic formulations. DMAA in oligomers improves adhesion, UV and impact resistance. Applications are adhesives, UV coatings, Inks, Optical Products and similar applications. view less | Request Sample |
PEL-CAT CA100 | Ele Corporation | PEL-CAT CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons that facilitate the operning of the oxirane ring of epoxides. This compound shows marked acceleration because of the presence of the phenolic hydroxyl group. It is an activator for curing agents such as polyamide...view more PEL-CAT CA100 is an efficient tertiary amine accelerator and curing agent for epoxy resin systems. It is a technical preparation of Tris-(Dimethylaminomethyl) Phenol, a Mannich base. This product functions as a Lewis base containing unshared electrons that facilitate the operning of the oxirane ring of epoxides. This compound shows marked acceleration because of the presence of the phenolic hydroxyl group. It is an activator for curing agents such as polyamides, amidoamines and amine adducts. PEL-CAT CA100 finds use in many applications including adhesives, casting and flooring. The low volatility of this product minimizes odors. view less | |
Domide G-A0432 | Kukdo Chemical Co., Ltd. | Domide G-A0432 is a low viscosity Polyamidoamine Resin for reaction with liquid or solid Epoxy Resins. GA0432 is lower in viscosity than G-A0533. This product is well suited for use in sealants, electrical potting and casting. | |
BNX® 5010 TPR | Mayzo, Inc. | BNX® 5010 TPR is a 50:50 blend of BNX® 1010 and SIS thermoplastic rubber in a pelletized form. It can be used with sigma mixers to achieve a more uniform dispersion of the antioxidant. It is an effective, non-discoloring stabilizer that provides excellent...view more BNX® 5010 TPR is a 50:50 blend of BNX® 1010 and SIS thermoplastic rubber in a pelletized form. It can be used with sigma mixers to achieve a more uniform dispersion of the antioxidant. It is an effective, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life. BNX® 5010 TPR is used in hot-melt pressure sensitive adhesives. view less | |
EPOTUF® 37-630 | Polynt Composites | EPOTUF® 37-630 is an accelerated amido-amine curing agent. This product cures in the presence of moisture and offers a good balance of mechanical and chemical-resistance properties. It can be used in room-temperature curing of EPOTUF® epoxy resins for coa...view more EPOTUF® 37-630 is an accelerated amido-amine curing agent. This product cures in the presence of moisture and offers a good balance of mechanical and chemical-resistance properties. It can be used in room-temperature curing of EPOTUF® epoxy resins for coatings, concrete surfacers and sealers, hand lay-up laminating, adhesives for bonding new to old concrete, and patching compounds or grouts. view less | |
Ancamide® 2652 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2652 Curing Agent is a specialpolyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings specifically developed to provide long overcoatability with epoxy and alternative resin technology. | Request Sample |
Amicure® CG-325G Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. | Request Sample |
Bitoner® Resin DH-1110 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and...view more Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and good compatibility. DH-1110 has recommended applications in hot melt adhesives, sealants, pressure sensitive adhesives, and wax modifications. view less | |
Bitoner® C5 Resin BT-2104 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wa...view more Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wax cloud point, low odor, and water resistance. BT-2104 has recommended applications in solvent based PSA, sealants, coatings, hot melt adhesives, and HMPSA. view less | |
Bitoner® C9 Resin BP-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low...view more Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-100 has recommended applications in sealants, shoe adhesives, rubber, coatings, and hot melt adhesives. view less | |
Bitoner® C9 Resin BP-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...view more Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. view less | |
Bitoner® C9 Resin BP-140 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...view more Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. view less | |
Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...view more Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. view less | |
Bitoner® Resin BA-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...view more Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. view less | |
Bitoner® H-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...view more Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. view less | |
Bitoner® Hydrogenated C9 Resins H-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS...view more Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-120 has recommended applications in solvent adhesives, hot melt adhesives, and wax modification. view less | |
Amicure® CG-1400F | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-1400F curing agent is a micronized grade of dicyandiamide containing 3,5% of an inert flowcontrol additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent forepoxy resins. | Request Sample |
Chisorb® H2346 | Double Bond Chemical Ind., Co., Ltd. | Chisorb® H2346 is an oligomer hindered amine light stabilizer (HALS). It is particularly effective as a light and long term heat stabilizer for plastics such as PE and PP. This product exhibits minimal color contribution, excellent compatibility with other HALS and UVAs, good solubility/migration balance, good extraction resistance and FDA sanctioned in polyolefins. Chisorb® H2346 is recommended for use in polyethylene, polypropylene, polystyrene, polyamide...view more Chisorb® H2346 is an oligomer hindered amine light stabilizer (HALS). It is particularly effective as a light and long term heat stabilizer for plastics such as PE and PP. This product exhibits minimal color contribution, excellent compatibility with other HALS and UVAs, good solubility/migration balance, good extraction resistance and FDA sanctioned in polyolefins. Chisorb® H2346 is recommended for use in polyethylene, polypropylene, polystyrene, polyamides, polyurethanes, flexible PVC, rigid PVC and in certain styrenic elastomer and adhesive specialty applications. It appears as a white to light yellow granule. view less | |
IRGANOX® 1035 | BASF Dispersions & Resins | IRGANOX 1035 is a sulfur-containing, primary (phenolic) antioxidant and heat stabilizer used for processing stabilization of polyethylene wire and cable resins. IRGANOX 1035 is used in polyolefins, namely polyethylene, polypropylene, polybutene, as well as, in other polymers such as styrene homo- and co-polymers. It may also be used in linear polyesters, PVC, polyamide...view more IRGANOX 1035 is a sulfur-containing, primary (phenolic) antioxidant and heat stabilizer used for processing stabilization of polyethylene wire and cable resins. IRGANOX 1035 is used in polyolefins, namely polyethylene, polypropylene, polybutene, as well as, in other polymers such as styrene homo- and co-polymers. It may also be used in linear polyesters, PVC, polyamides, and polyurethanes, elastomers such as SBS, EPR, EPDM, and other synthetic rubbers, adhesives, natural and synthetic tackifiers resins and other organic substrates. Additionally, it is recommended for use in wire and cable resin applications containing carbon black. view less | |
Primid® XL-552 | EMS-CHEMIE AG (PRIMID) | Primid® XL-552 is a beta-hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in exterior weather resistant powder coats. | |
Primid® QM-1260 | EMS-CHEMIE AG (PRIMID) | Primid® QM-1260 is an improved hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high color direct-fired powder coats. | |
Primid® SF-4510 | EMS-CHEMIE AG (PRIMID) | Primid® SF-4510 is a hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high gloss powder coatings as well as applications were good outgassing properties are required. | |
Domide G-A0533 | Kukdo Chemical Co., Ltd. | Domide G-A0533 is a low-viscosity Polyamidoamine Resin designed for reaction with liquid or solid Epoxy Resins. It can be used as all or part for use in making sealants, electrical potting, casting, coatings and flooring applications. | |
CERAFLOUR® 960 | BYK | CERAFLOUR® 960 is an additive for improved outgassing of powder coatings based on ß-hydroxyalkylamides. It is composed of micronized modified amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane ...view more CERAFLOUR® 960 is an additive for improved outgassing of powder coatings based on ß-hydroxyalkylamides. It is composed of micronized modified amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. The additive allows better degassing of powder coatings with ß-Hydroxyalkylamide hardeners and improves pigment wetting, leveling, and DOI. view less | Request Sample |
MONORAL® 8700 | HS CHEM CO.,LTD | MONORAL® 8700 is a micronized amide wax powder. This product is often used in heavy duty protective coatings, top coats, primers, and solvent based anti-corrosion coatings. | |
MONORAL® 8800 | HS CHEM CO.,LTD | MONORAL® 8800 is a micronized amide wax powder. This product is used in heavy duty protective coatings, top coats, primers, and solvent based anti-corrosion coatings. | |
MONORAL® 8900 | HS CHEM CO.,LTD | MONORAL® 8900 is a micronized amide wax powder. This product is used in heavy duty protective coatings and solvent based anti-corrosion coatings. |