UL Prospector

Success!

Successfully saved your search
68 Results
BLUESIL FLD 21625 Elkem Silicones ​BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid.
TEGO® Protect 5100 N Evonik Operations GmbH, BL Coating Additives TEGO® Protect 5100 N is an emulsion of a hydroxyfunctional polydimethylsiloxane. Request Sample
BYK®-300 BYK BYK®-300 is a solution of a polyether modified polydimethylsiloxane. This product is a standard surface additive in the coatings industry for all solvent-borne systems. Request Sample
Dow Corning® Q2-7735 Adhesive Univar Solutions Dow Corning® Q2-7735 Adhesive is a polydimethylsiloxane gum and resin dispersion. It is a high-viscosity fluid which offers high tack combined with good adhesion. Request Sample
DOWSIL™ 51 Additive Dow Performance Silicones DOWSIL™ 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance.
BLUESIL ADD 11013 Elkem Silicones BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks.
Silsurf®A008-UP Siltech Corp. Silsurf®A008-UP is a very low molecular weight ethoxylated polydimethylsiloxane. It has a viscosity of 60 and is used in inks and coatings where strong wetting and spreading is required.
Silsurf®A004-UP Siltech Corp. Silsurf®A004-UP is a high purity, very low molecular weight ethoxylated polydimethylsiloxane. It has a viscosity of 30 and is used in inks and coatings where strong wetting and spreading is required.
941 LBA PCI Group, Inc. 941 LBA is a clear, linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums. It provides higher brightness, controlled uniformity and burnishing and helps prevent “black” float.
BRB Siloen® TA 394 BRB International BV BRB Siloen® TA 394 is a solvent based high molecular weight polydimethylsiloxane formulation, designed as a hammertone finish additive. It provides a hammertone finish effect to paints and coatings.
SILCOLAPSE 426R Elkem Silicones SILCOLAPSE 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.
Siltech® C-4405 Siltech Corp. Siltech® C-4405 is an 80% active dispersion of a very high molecular weight polydimethylsiloxane. It is an additive for both water-based as well as solvent-based paints and inks, providing slip, mar resistance, gloss, anti-blocking and release effects.
TEGOMER® E-SI 2330 Evonik Operations GmbH, BL Coating Additives TEGOMER® E-SI 2330 is a 100% active, liquid epoxy-functional polydimethylsiloxane. It is solvent-free and dilutable by esters, ketones and glycol ethers. It has limited miscibility with aromatic hydrocarbons and used in co-binder applications. Request Sample
BYK®-331 BYK BYK®-331 is a polyether modified polydimethylsiloxane. This product is used in all solvent-borne, solvent-free and aqueous coatings. In two-component polyurethane systems, it can also be added to the isocyanate hardener. Request Sample
BLUESIL ADD 10086 Elkem Silicones BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...view more BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. view less
BYK®-UV 3510 BYK BYK®-UV 3510 is a surface additive for radiation curing systems. It is a polyether modified polydimethylsiloxane. In non-aqueous systems BYK-UV 3510 improves substrate wetting and tape release as well as leveling, and increases surface slip. Request Sample
BYK®-302 BYK BYK®-302 is a polyether modified polydimethylsiloxane. This product is a solvent-free version of BYK-300. This product is especially used in systems in which solvent-free additives are requested or where a requirement for a special solvent exists. Request Sample
BYK®-307 BYK BYK®-307 is a polyether modified polydimethylsiloxane. This product has features similar to BYK-306. Due to the fact that it is solvent-free, it is preferred in systems where solvent-free additives are requested or where a requirement for a special solven...view more BYK®-307 is a polyether modified polydimethylsiloxane. This product has features similar to BYK-306. Due to the fact that it is solvent-free, it is preferred in systems where solvent-free additives are requested or where a requirement for a special solvent exists. view less Request Sample
AMMA PCI Group, Inc. AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acryl...view more AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic, polyamide, polyester, urea and urethane. view less
MFA 31 PCI Group, Inc. MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances c...view more MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances color uniformity and allows for sharper gloss. view less
SILICONE FLUID ATPN-1000 Beijing Entrepreneur Science &Trading Co., Ltd. SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...view more SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. view less
ASAFA #3 PCI Group, Inc. ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epox...view more ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epoxies, vinyls and most oleo-resinous non-aqueous systems. view less
Borchi® Gol 3467 Borchers, A Company of OMG Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi®...view more Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi® Gol 3467 can be used in waterborne and solvent borne. view less
BYK®-UV 3530 BYK BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueou...view more BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueous radiation curable systems leveling is improved. The surface tension, foam behavior or transparency are scarcely influenced. view less Request Sample
Hydrophobic Fumed Silica R1202 Ningxia Futael Silicon Industry Co.,LTD Hydrophobic Fumed Silica R1202 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, excellent thickening and thixotropy property, and helps improve flowability of powders. Ideal for use in adhesives a...view more Hydrophobic Fumed Silica R1202 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, excellent thickening and thixotropy property, and helps improve flowability of powders. Ideal for use in adhesives and sealants, epoxy resin, vinyl resin and gel coat, and able glue, Coating, and Copier toner. view less
BYK®-306 BYK BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...view more BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. view less Request Sample
Hydrophobic Fumed Silica R1208 Ningxia Futael Silicon Industry Co.,LTD Hydrophobic Fumed Silica R1208 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, xcellent thickening and thixotropy property, and improves flowability of powders. Ideal for use in adhesives and sea...view more Hydrophobic Fumed Silica R1208 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, xcellent thickening and thixotropy property, and improves flowability of powders. Ideal for use in adhesives and sealants, epoxy resin, vinyl resin and gel coat, able glue, Coating, and Copier toner. view less
BYK®-333 BYK BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....view more BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. view less Request Sample
SILCOLAPSE 120 Elkem Silicones SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aq...view more SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aqueous medium. SILCOLAPSE 120 is designed exclusively for industrial use. view less
Octosperse TS-10 Tiarco Chemical Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...view more Octosperse TS-10 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. The eventual concentration can be established which is the most economical and efficient for a given system. view less
AEROSIL® R 208 Evonik Operations GmbH, BL Coating Additives AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...view more AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. view less Request Sample
BYK®-SILCLEAN 3720 BYK BYK®-SILCLEAN 3720 is a surface additive used to improve surface cleanability. It is a solution of a polyether modified hydroxy functional polydimethylsiloxane. In many paint systems BYK-SILCLEAN 3700 and BYK-SILCLEAN 3720 provide an increase of hydrophob...view more BYK®-SILCLEAN 3720 is a surface additive used to improve surface cleanability. It is a solution of a polyether modified hydroxy functional polydimethylsiloxane. In many paint systems BYK-SILCLEAN 3700 and BYK-SILCLEAN 3720 provide an increase of hydrophobicity and oleophobicity. Water- and oil-repellency are both significantly improved. Additionally, these additives improve dirt release and ease of cleaning of the coating surface. view less Request Sample
BYK®-019 BYK BYK®-019 is a solution of a polyether modified polydimethylsiloxane. BYK-019 is recommended for aqueous coatings based on polyurethane dispersions and polyurethane /acrylic combinations. It is also effective for defoaming pigment concentrate formulations....view more BYK®-019 is a solution of a polyether modified polydimethylsiloxane. BYK-019 is recommended for aqueous coatings based on polyurethane dispersions and polyurethane /acrylic combinations. It is also effective for defoaming pigment concentrate formulations. To reduce microfoam, a combination of BYK-019 with BYK-024 in a ratio of 3:2 has been shown to give excellent results. view less Request Sample
SILICONE FLUID ATPN-100 Beijing Entrepreneur Science &Trading Co., Ltd. SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...view more SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. view less
XIAMETER® MEM-0349 Emulsion Univar Solutions XIAMETER® MEM-0349 Emulsion is a 60% actives non-ionic emulsion formulated with a polydimethylsiloxane. Because of its non-ionic nature, it can be used in a variety of systems, such as nonionic, anionic, cationic surfactant or polymer systems without form...view more XIAMETER® MEM-0349 Emulsion is a 60% actives non-ionic emulsion formulated with a polydimethylsiloxane. Because of its non-ionic nature, it can be used in a variety of systems, such as nonionic, anionic, cationic surfactant or polymer systems without forming a complex. Extensive testing has shown that XIAMETER MEM-0349 Emulsion performs comparably to its predecessor and offers better dilution stability at 20% solids. view less Request Sample
AEROSIL® R 202 Evonik Operations GmbH, BL Coating Additives AEROSIL® R 202 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 202 helps with the thickening and thixotropy of complex polar liquids based ...view more AEROSIL® R 202 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 202 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. view less Request Sample
BYK®-1770 BYK BYK®-1770 is a polyether modified polydimethylsiloxane. This product is very efficient in aqueous thick layer systems based on acrylic and PU-acrylics which are applied by airless / airmix. It prevents formation of microfoam and is suitable for pigmented ...view more BYK®-1770 is a polyether modified polydimethylsiloxane. This product is very efficient in aqueous thick layer systems based on acrylic and PU-acrylics which are applied by airless / airmix. It prevents formation of microfoam and is suitable for pigmented systems and clear coats. The addition of BYK-1770 has no negative influence on turbidity (transparency) and gloss in high gloss systems. The additive is solvent-free. view less Request Sample
BYK®-330 BYK BYK®-330 is a solution of a polyether modified polydimethylsiloxane. It is a standard surface additive in the coatings industry for all solvent-borne systems. These additives provide a medium reduction of the surface tension of paint systems.They increase...view more BYK®-330 is a solution of a polyether modified polydimethylsiloxane. It is a standard surface additive in the coatings industry for all solvent-borne systems. These additives provide a medium reduction of the surface tension of paint systems.They increase surface slip as well as improve leveling and gloss. Silicone additives prevent formation of Bénard cells. These additives also improve substrate wetting and give anti-blocking properties. view less Request Sample
BYK®-370 BYK BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethan...view more BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethanes. It can also crosslink with the following binder systems: alkyd/melamine, polyester/melamine, acrylic/melamine, self-crosslinking acrylates, and epoxies. BYK-370 increases the surface slip. view less Request Sample
BYK®-UV 3500 BYK BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to...view more BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to crosslinking by acryl functionality. In non-aqueous radiation curable systems BYK-UV 3500 gives excellent surface slip and tape release with permanent effect due to crosslinking by acryl functionality, as well as improved leveling. view less Request Sample
XIAMETER™ PMX-200 Silicone Fluid 500 CS Univar Solutions XIAMETER® PMX-200 Silicone Fluid 500 CS is a clear, colorless polydimethylsiloxane fluid polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and ...view more XIAMETER® PMX-200 Silicone Fluid 500 CS is a clear, colorless polydimethylsiloxane fluid polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less Request Sample
SILRES® BS 50 Wacker Chemical Corporation SILRES® BS 50 is a solvent free water-thinnable emulsion of a specialsilicone resin / polydimethylsiloxane blend. It is used as a water-repellent additive for silicate emulsion paints and whitewashes. By adding the water repellent, hydrophobic paints are ...view more SILRES® BS 50 is a solvent free water-thinnable emulsion of a specialsilicone resin / polydimethylsiloxane blend. It is used as a water-repellent additive for silicate emulsion paints and whitewashes. By adding the water repellent, hydrophobic paints are obtained and the pigments are prevented from washing out, i. e. fading of the coatings is prevented. The durability of the paint is significantly increased. SILRES® BS 50 can be applied in coatings, facade coatings, plasters, silicate and silicate emulsion paints. view less Request Sample
Borchi® Gol LA 50 Borchers, A Company of OMG Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the...view more Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the interfacial tension differences between the liquid and the substrate. This product reduces cratering and pin hole tendency and is compatible in most binders. It can be used for high quality clears and pigmented industrial and decorative coatings. view less
XIAMETER™ PMX-200 Silicone Fluid 100 CS Univar Solutions XIAMETER® PMX-200 Silicone Fluid 100 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic s...view more XIAMETER® PMX-200 Silicone Fluid 100 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less Request Sample
XIAMETER™ PMX-200 Silicone Fluid 200 CS Univar Solutions XIAMETER® PMX-200 Silicone Fluid 200 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic s...view more XIAMETER® PMX-200 Silicone Fluid 200 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less Request Sample
XOANONS® WE-D5510 Anhui Xoanons Chemical Co., Ltd. XOANONS® WE-D5510 is a polyether modified polydimethylsiloxane. It provides stronger reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minim...view more XOANONS® WE-D5510 is a polyether modified polydimethylsiloxane. It provides stronger reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coating films. It is suitable for UV high speed printing inks and UV optical fiber coloring ink. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. view less
XOANONS® WE-D5512 Anhui Xoanons Chemical Co., Ltd. XOANONS® WE-D5512 is a polyether modified polydimethylsiloxane and leveling agent. It provides a strong reduction of the surface tension and reduces the friction coefficient. It improves scraping resistance and provides a smooth feeling. It also has good ...view more XOANONS® WE-D5512 is a polyether modified polydimethylsiloxane and leveling agent. It provides a strong reduction of the surface tension and reduces the friction coefficient. It improves scraping resistance and provides a smooth feeling. It also has good recoating and minimal influence on adhesion of coating films. This product is suitable for UV high speed printing ink and UV optical fiber coloring ink. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, but that does not affect the quality of products. view less
XIAMETER™ PMX-200 Silicone Fluid 50 CS Univar Solutions XIAMETER® PMX-200 Silicone Fluid 50 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic so...view more XIAMETER® PMX-200 Silicone Fluid 50 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less Request Sample
XIAMETER™ PMX-200 Silicone Fluid 350 CS Univar Solutions XIAMETER® PMX-200 Silicone Fluid 350 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic s...view more XIAMETER® PMX-200 Silicone Fluid 350 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less Request Sample
XIAMETER™ PMX-200 Silicone Fluid 1000 CS Univar Solutions XIAMETER® PMX-200 Silicone Fluid 1000 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic ...view more XIAMETER® PMX-200 Silicone Fluid 1000 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less Request Sample
Octosperse TS-30 Tiarco Chemical Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the f...view more Octosperse TS-30 is a polydimethylsiloxane and silica blend in the form of an aqueous nonionic emulsion. It is compatible to most wet processing uses. Use either full strength or cut with water before adding, whichever gives the best dispersion into the foaming system. For starting, it is suggested that in dye becks and wash operations that 1/2 ounce of the defoamer be used per 100 gallons of the process volume. The concentration can then be adjusted to establish the most economical and efficient concentration. view less
Silsurf® A008 Siltech Corp. Silsurf® A008 is a very low molecular weight ethoxylated polydimethylsiloxane and it is a water-soluble silicone surfactant with excellent wetting capabilities. It is a super wetter and can be formulated where fast wetting is required. Silsurf® A008, at a...view more Silsurf® A008 is a very low molecular weight ethoxylated polydimethylsiloxane and it is a water-soluble silicone surfactant with excellent wetting capabilities. It is a super wetter and can be formulated where fast wetting is required. Silsurf® A008, at a use level of 0.1%, reduces the surface tension of water to below 20 dynes/cm and is therefore an excellent wetting and spreading agent. It's wetting properties are useful in personal care applications, textile, inks & coatings, agricultural and any other areas where wetting and spreading is desired. view less
SiSiB® PC5951 SiSiB SILICONES SiSiB® PC5951 is a colorless clear liquid. It is a high purity, undiluted iso-butyltriethoxysilane. It should be diluted with solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane bef...view more SiSiB® PC5951 is a colorless clear liquid. It is a high purity, undiluted iso-butyltriethoxysilane. It should be diluted with solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane before use. It can also be used in the formulation of water repellent products, when diluted with an appropriate solvent; as a surface modifier to generate hydrophobicity and to increase compatibility to organic non-polar matrices; in the production of silane crosslinking formulations; or as a component in the manufacture of Ziegler-Natta Catalysts. view less
SiSiB® PC5952 SiSiB SILICONES SiSiB® PC5952 is a colorless clear liquid. It is a high purity, undiluted iso-butyltriethoxysilane. It should be diluted with solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane before ...view more SiSiB® PC5952 is a colorless clear liquid. It is a high purity, undiluted iso-butyltriethoxysilane. It should be diluted with solvents such as alcohols, chlorinated solvents, aliphatic solvents, and low molecular weight cyclic polydimethylsiloxane before use. It can also be used in the formulation of water repellent products, when diluted with an appropriate solvent; as a surface modifier to generate hydrophobicity and to increase compatibility to organic non-polar matrices; in the production of silane crosslinking formulations; or as a component in the manufacture of Ziegler-Natta Catalysts. view less
BYK®-377 BYK BYK®-377 is a polyether modified polydimethylsiloxane. The product improves substrate wetting and leveling at low dosages. In most cases only half the amount of a conventional silicone is needed to optimize substrate wetting, slip and tape release of UV c...view more BYK®-377 is a polyether modified polydimethylsiloxane. The product improves substrate wetting and leveling at low dosages. In most cases only half the amount of a conventional silicone is needed to optimize substrate wetting, slip and tape release of UV curable, 2 pack PU, polyester/melamine and aqueous topcoats. Due to the good compatibility in common binder systems, the production of highly transparent varnishes is possible. Typically it does not cause turbidity in clearcoats. Sanding is required for recoat adhesion. The OH groups of BYK-377 can react with polyisocyanates view less Request Sample
XIAMETER™ MEM-8035 Emulsion Univar Solutions XIAMETER™ MEM-8035 Emulsion is a white, pourable cationic emulsion of amino-functional polydimethylsiloxane. It is suitable to provide Fabric Care and Auto Care benefits. In Fabric Care XIAMETER™ MEM-8035 Emulsion can be used for rinse cycle fabric soften...view more XIAMETER™ MEM-8035 Emulsion is a white, pourable cationic emulsion of amino-functional polydimethylsiloxane. It is suitable to provide Fabric Care and Auto Care benefits. In Fabric Care XIAMETER™ MEM-8035 Emulsion can be used for rinse cycle fabric softeners. It is easily incorporated into products and has excellent detergent resistance. It provides highly significant improvements in anti-wrinkle, ease of ironing, ease of wrinkle removal, and significant results in fabric water absorbency compared to conventional rinse cycle fabric softener compositions. In Auto Care, XIAMETER™ MEM-8035 Emulsion can be used in non-aerosol products that may contain solvents such as paint polishes, vinyl protectors, and rinse aids for automatic car washes. view less Request Sample
BYK®-313 BYK BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properti...view more BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properties, improves substrate wetting, improves flow and leveling of solvent-borne systems, very effective at low film thickness, increases gloss, strong increase of surface slip, FDA § 175.300 compliant, BYK-313 is a heat-resistant silicone due to the polyester modification, in baking systems, no loss in adhesion and no surface defects occur, no thermal decomposition at temperatures between 150°C and 230°C like polyether-modified silicones do, HAPS and aromatic-free. view less Request Sample
BYK®-310 BYK BYK®-310 is a solution of a polyester modified polydimethylsiloxane. This product is a heat resistant silicone additive, i.e., in contrast to conventional (polyether modified) silicones, it shows no thermal decomposition at temperatures between 150°C/302°...view more BYK®-310 is a solution of a polyester modified polydimethylsiloxane. This product is a heat resistant silicone additive, i.e., in contrast to conventional (polyether modified) silicones, it shows no thermal decomposition at temperatures between 150°C/302°F and 230°C/446°F. Thus, upon the recoating baking systems, no loss in adhesion and no surface defects occur. (Note: The aforementioned defects can be caused by the decomposition products of conventional silicones at temperatures above 150°C/302°F.) The effective substance of BYK-310 is listed in title 21 CFR (food and drugs) § 175.300, Indirect Food Additives, Adhesives and Components of Coatings. The usage level may not exceed 0,1% (delivery form based on total formulation) and the film thickness may not exceed 12 µm. view less Request Sample
SILBIONE DISPERSION CAF 71500 GRY Elkem Silicones SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...view more SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. view less
SILBIONE CAF 72576 RED Elkem Silicones SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...view more SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. view less
SILBIONE DISPERSION CAF 71528 Elkem Silicones SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...view more SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. view less
SILBIONE DISPERSION CAF 71550 Elkem Silicones SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...view more SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. view less
BLUESIL FLD 47V100 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V500 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V350 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V1 000 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
BLUESIL FLD 47V50 Elkem Silicones BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids.
ORDISOL SWT-31 Concentrol, S.A., Productos ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxane...view more ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxanes modified with polyethers are additives with great ease of use. Problems associated with the use of silicone oils (PDMS) are not encountered with these additives. No contamination problems or surface defects are expected with the use of these additives. view less