| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BYK®-300 | BYK | BYK®-300 is a solution of a polyether modified polydimethylsiloxane. This product is a standard surface additive in the coatings industry for all solvent-borne systems. | Request Sample |
| BYK®-331 | BYK | BYK®-331 is a polyether modified polydimethylsiloxane. This product is used in all solvent-borne, solvent-free and aqueous coatings. In two-component polyurethane systems, it can also be added to the isocyanate hardener. | Request Sample |
| BYK®-UV 3510 | BYK | BYK®-UV 3510 is a surface additive for radiation curing systems. It is a polyether modified polydimethylsiloxane. In non-aqueous systems BYK-UV 3510 improves substrate wetting and tape release as well as leveling, and increases surface slip. | Request Sample |
| BYK®-302 | BYK | BYK®-302 is a polyether modified polydimethylsiloxane. This product is a solvent-free version of BYK-300. This product is especially used in systems in which solvent-free additives are requested or where a requirement for a special solvent exists. | Request Sample |
| BYK®-307 | BYK | BYK®-307 is a polyether modified polydimethylsiloxane. This product has features similar to BYK-306. Due to the fact that it is solvent-free, it is preferred in systems where solvent-free additives are requested or where a requirement for a special solven...view more BYK®-307 is a polyether modified polydimethylsiloxane. This product has features similar to BYK-306. Due to the fact that it is solvent-free, it is preferred in systems where solvent-free additives are requested or where a requirement for a special solvent exists. view less | Request Sample |
| Borchi® Gol 3467 | Borchers, A Company of OMG | Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi®...view more Borchi® Gol 3467 is a polyether modified polydimethylsiloxane with 100% active ingredient for the promotion of substrate wetting of hydrophobic or contaminated surfaces, difficult to wet wood surfaces; for preventions of flow problems and craters. Borchi® Gol 3467 can be used in waterborne and solvent borne. view less | |
| BYK®-306 | BYK | BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...view more BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. view less | Request Sample |
| BYK®-333 | BYK | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....view more BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. view less | Request Sample |
| BYK®-019 | BYK | BYK®-019 is a solution of a polyether modified polydimethylsiloxane. BYK-019 is recommended for aqueous coatings based on polyurethane dispersions and polyurethane /acrylic combinations. It is also effective for defoaming pigment concentrate formulations....view more BYK®-019 is a solution of a polyether modified polydimethylsiloxane. BYK-019 is recommended for aqueous coatings based on polyurethane dispersions and polyurethane /acrylic combinations. It is also effective for defoaming pigment concentrate formulations. To reduce microfoam, a combination of BYK-019 with BYK-024 in a ratio of 3:2 has been shown to give excellent results. view less | Request Sample |
| BYK®-1770 | BYK | BYK®-1770 is a polyether modified polydimethylsiloxane. This product is very efficient in aqueous thick layer systems based on acrylic and PU-acrylics which are applied by airless / airmix. It prevents formation of microfoam and is suitable for pigmented ...view more BYK®-1770 is a polyether modified polydimethylsiloxane. This product is very efficient in aqueous thick layer systems based on acrylic and PU-acrylics which are applied by airless / airmix. It prevents formation of microfoam and is suitable for pigmented systems and clear coats. The addition of BYK-1770 has no negative influence on turbidity (transparency) and gloss in high gloss systems. The additive is solvent-free. view less | Request Sample |
| BYK®-330 | BYK | BYK®-330 is a solution of a polyether modified polydimethylsiloxane. It is a standard surface additive in the coatings industry for all solvent-borne systems. These additives provide a medium reduction of the surface tension of paint systems.They increase...view more BYK®-330 is a solution of a polyether modified polydimethylsiloxane. It is a standard surface additive in the coatings industry for all solvent-borne systems. These additives provide a medium reduction of the surface tension of paint systems.They increase surface slip as well as improve leveling and gloss. Silicone additives prevent formation of Bénard cells. These additives also improve substrate wetting and give anti-blocking properties. view less | Request Sample |
| XOANONS® WE-D5510 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5510 is a polyether modified polydimethylsiloxane. It provides stronger reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minim...view more XOANONS® WE-D5510 is a polyether modified polydimethylsiloxane. It provides stronger reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coating films. It is suitable for UV high speed printing inks and UV optical fiber coloring ink. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. view less | |
| BYK®-377 | BYK | BYK®-377 is a polyether modified polydimethylsiloxane. The product improves substrate wetting and leveling at low dosages. In most cases only half the amount of a conventional silicone is needed to optimize substrate wetting, slip and tape release of UV c...view more BYK®-377 is a polyether modified polydimethylsiloxane. The product improves substrate wetting and leveling at low dosages. In most cases only half the amount of a conventional silicone is needed to optimize substrate wetting, slip and tape release of UV curable, 2 pack PU, polyester/melamine and aqueous topcoats. Due to the good compatibility in common binder systems, the production of highly transparent varnishes is possible. Typically it does not cause turbidity in clearcoats. Sanding is required for recoat adhesion. The OH groups of BYK-377 can react with polyisocyanates view less | Request Sample |
| XOANONS® WE-D5512 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D5512 is a polyether modified polydimethylsiloxane and leveling agent. It provides a strong reduction of the surface tension and reduces the friction coefficient. It improves scraping resistance and provides a smooth feeling. It also has good ...view more XOANONS® WE-D5512 is a polyether modified polydimethylsiloxane and leveling agent. It provides a strong reduction of the surface tension and reduces the friction coefficient. It improves scraping resistance and provides a smooth feeling. It also has good recoating and minimal influence on adhesion of coating films. This product is suitable for UV high speed printing ink and UV optical fiber coloring ink. Turbidity and viscosity may occur at low temperatures. It would become transparent and flow after heated, but that does not affect the quality of products. view less | |
| BYK®-UV 3530 | BYK | BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueou...view more BYK®-UV 3530 is a surface additive for radiation curable systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3530 improves substrate wetting due to the strong reduction of surface tension. In non-aqueous radiation curable systems leveling is improved. The surface tension, foam behavior or transparency are scarcely influenced. view less | Request Sample |
| BYK®-SILCLEAN 3720 | BYK | BYK®-SILCLEAN 3720 is a surface additive used to improve surface cleanability. It is a solution of a polyether modified hydroxy functional polydimethylsiloxane. In many paint systems BYK-SILCLEAN 3700 and BYK-SILCLEAN 3720 provide an increase of hydrophob...view more BYK®-SILCLEAN 3720 is a surface additive used to improve surface cleanability. It is a solution of a polyether modified hydroxy functional polydimethylsiloxane. In many paint systems BYK-SILCLEAN 3700 and BYK-SILCLEAN 3720 provide an increase of hydrophobicity and oleophobicity. Water- and oil-repellency are both significantly improved. Additionally, these additives improve dirt release and ease of cleaning of the coating surface. view less | Request Sample |
| BYK®-UV 3500 | BYK | BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to...view more BYK®-UV 3500 is a surface additive for radiation curing systems. It is a polyether modified acryl functional polydimethylsiloxane. In aqueous UV-coatings BYK-UV 3500 gives excellent leveling, high surface slip and tape release with permanent effect due to crosslinking by acryl functionality. In non-aqueous radiation curable systems BYK-UV 3500 gives excellent surface slip and tape release with permanent effect due to crosslinking by acryl functionality, as well as improved leveling. view less | Request Sample |
| BYK®-313 | BYK | BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properti...view more BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properties, improves substrate wetting, improves flow and leveling of solvent-borne systems, very effective at low film thickness, increases gloss, strong increase of surface slip, FDA § 175.300 compliant, BYK-313 is a heat-resistant silicone due to the polyester modification, in baking systems, no loss in adhesion and no surface defects occur, no thermal decomposition at temperatures between 150°C and 230°C like polyether-modified silicones do, HAPS and aromatic-free. view less | Request Sample |
| BYK®-310 | BYK | BYK®-310 is a solution of a polyester modified polydimethylsiloxane. This product is a heat resistant silicone additive, i.e., in contrast to conventional (polyether modified) silicones, it shows no thermal decomposition at temperatures between 150°C/302°...view more BYK®-310 is a solution of a polyester modified polydimethylsiloxane. This product is a heat resistant silicone additive, i.e., in contrast to conventional (polyether modified) silicones, it shows no thermal decomposition at temperatures between 150°C/302°F and 230°C/446°F. Thus, upon the recoating baking systems, no loss in adhesion and no surface defects occur. (Note: The aforementioned defects can be caused by the decomposition products of conventional silicones at temperatures above 150°C/302°F.) The effective substance of BYK-310 is listed in title 21 CFR (food and drugs) § 175.300, Indirect Food Additives, Adhesives and Components of Coatings. The usage level may not exceed 0,1% (delivery form based on total formulation) and the film thickness may not exceed 12 µm. view less | Request Sample |
| ORDISOL SWT-31 | Concentrol, S.A., Productos | ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxanes modified with polyether...view more ORDISOL SWT-31 is a universal application silicone additive that offers an average reduction in surface tension, effective anticraters and improved slippage. In coatings increases gloss and leveling and in aqueous systems helps to improve antiblocking properties. Polydimethylsiloxanes modified with polyethers are additives with great ease of use. Problems associated with the use of silicone oils (PDMS) are not encountered with these additives. No contamination problems or surface defects are expected with the use of these additives. view less |
