| Rhenogran® MgO-75 | Rhein Chemie Rheinau GmbH | Rhenogran® MgO-75 is 75 % magnesium oxide and 25 % polymer binder and dispersing agents appearing as grey to white granules. This curing activator and acid acceptor finds application in polychloroprene rubber (CR) and adhesives. | |
| Rhenogran® DOTG-70 | Rhein Chemie Rheinau GmbH | Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the r...view more Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the rubber. In this way, optimal activity of the effective substance is assured. This accelerator is used for the vulcanization of natural and synthetic rubbers requiring mechanical properties and aging resistance. Rhenogran® DOTG-70 finds application in roller coverings and cable sheathing. view less | |
| Pergut® S 10 | Covestro | Pergut® S 10 is a fully chlorinated olefinic polymer used as the binder for anti-corrosion coatings. | |
| Polymer Concrete | Huntsman Performance Products | Polymer concretes are known for the improvements in strength, durability, and protection they offer over conventional portland cement concrete (PCC). Unlike polymer-modified PCC, which uses cement and water as a binder, polymer concrete uses an organic re...view more Polymer concretes are known for the improvements in strength, durability, and protection they offer over conventional portland cement concrete (PCC). Unlike polymer-modified PCC, which uses cement and water as a binder, polymer concrete uses an organic resin matrix as the "glue" to hold the aggregate together in place of the cementitous binder. view less | |
| Pergut® S 20 | Covestro | Pergut® S 20 is a fully chlorinated olefinic polymer used as the binder for anti-corrosion and concrete floor coatings and for roadmarking paints. | |
| AB-687 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AB-687, in the form of a milky liquid/anionic/nonionic, is an acrylic resin binder (acrylic polymer). It has good adhesion and ultra-fine particle size imparts tighter break to corrected and full grain leathers. AB-687 is also used as tough, soft, emulsio...view more AB-687, in the form of a milky liquid/anionic/nonionic, is an acrylic resin binder (acrylic polymer). It has good adhesion and ultra-fine particle size imparts tighter break to corrected and full grain leathers. AB-687 is also used as tough, soft, emulsion for base coat application suitable for finishing all types of leather. view less | |
| EPS® 2708 | EPS Materials | EPS® 2708 is an all-acrylic emulsion designed for high alkali applications. It can be used as a polymer admixture for cement-based products, and as a binder/primer for coatings over cementitious substrates. | Request Sample |
| AR-1263 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AR-1263, in the form of a milky liquid, is an acrylic resin binder (acrylic polymer). It has good light fastness, flexibility, wear resistance, and when combined with polyurethane resins emboss-able base coats with good print retention and coverage can be...view more AR-1263, in the form of a milky liquid, is an acrylic resin binder (acrylic polymer). It has good light fastness, flexibility, wear resistance, and when combined with polyurethane resins emboss-able base coats with good print retention and coverage can be formulated. It can be used alone or in combination with polyurethane resins in base or topcoat applications for automotive leathers. view less | |
| RHOPLEX EI-2000 | Univar Solutions | RHOPLEX EI-2000 is a versatile 100% acrylic polymer designed for use as a binder for exterior insulation and finish systems (EIFS) and as a cement modifier. Because it is cement-compatible, it offers excellent performance in EIFS cementitious basecoats an...view more RHOPLEX EI-2000 is a versatile 100% acrylic polymer designed for use as a binder for exterior insulation and finish systems (EIFS) and as a cement modifier. Because it is cement-compatible, it offers excellent performance in EIFS cementitious basecoats and adhesives. view less | Request Sample |
| DT-1169 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DT-1169, in the form of a whitish liquid, is an acrylic and polyurethane co-polymer. It is a unique dull binder for automotive topcoats that is typically used in combination with polyurethane resins to produce high performance topcoats with good physical ...view more DT-1169, in the form of a whitish liquid, is an acrylic and polyurethane co-polymer. It is a unique dull binder for automotive topcoats that is typically used in combination with polyurethane resins to produce high performance topcoats with good physical properties and good flow. view less | |
| AC-66(E) | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion promotor to enhance polymer coating and as a binder...view more AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion promotor to enhance polymer coating and as a binder to glass and metal substrates. view less | |
| VIACRYL® SC 160/60T | Allnex | Viacryl® SC 160/60T is a physically drying, plasticized acrylic mixed polymer. It is used a sole binder for road marking paints with good adhesion, rapid film loading capacity and non discoloration properties. The flexibility has been adjusted so that the...view more Viacryl® SC 160/60T is a physically drying, plasticized acrylic mixed polymer. It is used a sole binder for road marking paints with good adhesion, rapid film loading capacity and non discoloration properties. The flexibility has been adjusted so that the use of additional plasticizers is not necessary. view less | Request Sample |
| EPS® 2103 | EPS Materials | EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased fle...view more EPS® 2103 is an excellent choice to use as a modifier/additive for cementitious base coats and as the binder for finish coats for EIFS (exterior insulated finishing system) applications. For concrete admixture applications, EPS® 2103 imparts increased flexibility and decreased permeability to the system. view less | Request Sample |
| White Interior Topcoat with EPS® 2436 | EPS Materials | EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. | |
| Clear Interior Topcoat with EPS® 2436 | EPS Materials | EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. | |
| EPS® 2458 | EPS Materials | EPS® 2458 is a water-based, self-crosslinking all-acrylic binder for interior and exterior applications with very good in-can transparency and block resistance. | Request Sample |
| EPS® 2559 | EPS Materials | EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydrophobic properties of EPS® 2559 make it an excellent choice for high performance waterproofing paints on cementitious substrates and it can be used as the binder...view more EPS® 2559 is a styrenated acrylic emulsion offering excellent early water and humidity resistance. It can be formulated with a wide variety of co-solvents and with its excellent shear stability can be used in the grind phase of the formula. The early hydrophobic properties of EPS® 2559 make it an excellent choice for high performance waterproofing paints on cementitious substrates and it can be used as the binder in tile mastics. view less | Request Sample |
| EPS® 2436 | EPS Materials | EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common ap...view more EPS® 2436 is a self-crosslinking all-acrylic dispersion used as a binder for high-quality wood coatings. It has exceptional transparency and wood wetting (grain accentuation), as well as excellent chemical resistance and mechanical properties. Common applications include primers, topcoats, and self-sealers. view less | Request Sample |
| AC-662 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion promoter to enhance polymer coating as well as a binder...view more AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion promoter to enhance polymer coating as well as a binder to glass and metal substrates. view less | |
| EPS® 2420 | EPS Materials | EPS® 2420 is a self-crosslinking all-acrylic binder for interior and exterior wood applications such as multi-coat, enamels, and varnishes with exceptional leveling properties and UV resistance. In-can transparency is a key feature of this product. | Request Sample |
| Hauthane HD-4664 | Hauthaway | Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart grea...view more Hauthane HD-4664 is a medium soft, high solids, co-solvent free, aliphatic, polyurethane dispersion. It was designed as a high solids, multi-purpose textile binder polymer. It may be used as a blending resin for harder polyurethane polymers to impart greater film flexibility. A balanced composition provides good stability with acrylic latices and confers superior strength, abrasion resistance and low temperature flexibility properties. HD-4664 can be used as a sole vehicle or blended with acrylic emulsions for spray or pad bath applications. Solids can be reduced with water to optimize dry coating weight. This product may also be thickened with associative thickeners for knife-over-roll or similar methods. view less | |
| TSR1452 SILICONE COATING AND BINDER RESIN | Momentive | TSR1452 SILICONE COATING AND BINDER RESIN may be considered for use as a vehicle in paints for heat resistance, weather resistance and chemical resistance. A film of TSR1452 silicone resin is medium hard. It is a 60% by weight methyl phenyl silicone in xy...view more TSR1452 SILICONE COATING AND BINDER RESIN may be considered for use as a vehicle in paints for heat resistance, weather resistance and chemical resistance. A film of TSR1452 silicone resin is medium hard. It is a 60% by weight methyl phenyl silicone in xylene. Offers excellent thermal resistance with good gloss and color retention and low molecular weight polymer, enabling good compatibility with a wide range of organics. view less | |
| Hydrite® RS-A | Imerys Performance Additives | Hydrite®RS-A is a fine particle size, acidic pH Hydrous kaolin with a medium binder demand suitable for water based coatings, inks, polymer & rubber applications. | |
| AGOCEL® AC 2200 | CHT USA (formerly ICM) | AGOCEL® AC 2200 is a water-soluble polymer for controlling the required amount of water and rheology in mineral binder systems. It is a fine, white powder. | Request Sample |
| AGOCEL® AC 2530 | CHT USA (formerly ICM) | AGOCEL® AC 2530 is a water-soluble polymer for controlling the required amount of water and rheology in mineral binder systems. It is a fine, white powder. | Request Sample |
| Hydrite® R-A | Imerys Performance Additives | Hydrite®R-A is a fine particle size, acidic pH Hydrous kaolin with a medium binder demand suitable for solvent and water based coatings, inks, polymer & rubber applications. | |
| StanChem SC 6257 | StanChem Polymers | StanChem SC 6257 is emulsion polymer that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6257 exhibit good clarity, water resistance, abrasion resistance and excellent adhesion properties. | Request Sample |
| Andisil 151 Silane | AB Specialty Silicones | Andisil 151 Silane is a colorless, transparent liquid vinyl silane. It is a coupling agent in filled polymer systems. Andisil 151 Silane can also be used as a finish for glass or a binder additive in glass reinforced resins. | |
| RHOPLEX EI-5000 | Univar Solutions | RHOPLEX EI-5000 is a polymer emulsion is designed for use as a binder for trowel-applied non-cementitious, water-resistive barriers (WRBs) and adhesives. It is an excellent choice for use in exterior insulation and finish systems (EIFS) with drainage syst...view more RHOPLEX EI-5000 is a polymer emulsion is designed for use as a binder for trowel-applied non-cementitious, water-resistive barriers (WRBs) and adhesives. It is an excellent choice for use in exterior insulation and finish systems (EIFS) with drainage systems. view less | Request Sample |
| SETAQUA® B B 130 | Allnex | Setaqua B B 130 is a non-saponifable polymer dispersion which dries by oxidation. It is used as a binder for aqueous air- and force-drying coatings, especially primers, one-coat matt finishes and adhesion primers (also suitable for non-ferrous metals). | Request Sample |
| StanChem SC 6744 | StanChem Polymers | StanChem SC 6744 is emulsion polymer that can be used as a binder for a variety of primers and coatings for different substrates - cold rolled steel, wood, and plastic. Coatings formulated with SC 6744 exhibit good clarity, water resistance and excellent ...view more StanChem SC 6744 is emulsion polymer that can be used as a binder for a variety of primers and coatings for different substrates - cold rolled steel, wood, and plastic. Coatings formulated with SC 6744 exhibit good clarity, water resistance and excellent adhesion properties. view less | Request Sample |
| VINNAPAS® EF 8300 | Wacker Chemical Corporation | VINNAPAS® EF 8300 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. It was developed as a higher performance polymer for interior architectural coating formulations with environmental advantages. It is used as a broad application binde...view more VINNAPAS® EF 8300 is an aqueous dispersion of a vinyl acetate-ethylene (VAE) copolymer. It was developed as a higher performance polymer for interior architectural coating formulations with environmental advantages. It is used as a broad application binder for architectural coatings and can be applied in interior paints. view less | Request Sample |
| Carboset® 3076 | Lubrizol Advanced Materials, Inc. | Carboset® 3076 is a carboxylated acrylic solution polymer based primarily on renewable resources. This thermosetting resin provides outstanding tensile properties and good solvent resistance with no formaldehyde emissions during the cure cycle. This mater...view more Carboset® 3076 is a carboxylated acrylic solution polymer based primarily on renewable resources. This thermosetting resin provides outstanding tensile properties and good solvent resistance with no formaldehyde emissions during the cure cycle. This material will provide excellent rigidity as a binder for wet laid fiberglass, constructions products, and insulation applications. view less | |
| StanChem SC 6933 | StanChem Polymers | StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit goo...view more StanChem SC 6933 is small particle sized acrylic emulsion polymer that can be used as a binder for a variety of coatings for different substrates. SC 6933 is a hydrophobic latex with ambient self-crosslinking. Coatings formulated with SC 6933 exhibit good clarity, water resistance and excellent adhesion properties. view less | Request Sample |
| VINNAPAS® EN 1033 | Wacker Chemical Corporation | VINNAPAS® EN 1033 (CGN) is a self crosslinking, plasticizer-free, aqueous polymer dispersion from the monomers vinyl acetate and ethylene. This dispersion is particularly suitable as a binder for soft nonwovens. VINNAPAS® EN 1033 (CGN) is suitable for foa...view more VINNAPAS® EN 1033 (CGN) is a self crosslinking, plasticizer-free, aqueous polymer dispersion from the monomers vinyl acetate and ethylene. This dispersion is particularly suitable as a binder for soft nonwovens. VINNAPAS® EN 1033 (CGN) is suitable for foam application, impregnation or spraying and is applied in wall-coverings. view less | Request Sample |
| JK-230F | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-230F, in the form of a clear anionic liquid, is NMP free aqueous polyurethane polymer dispersion with good abrasion and adhesion resistance. It can be used as a primary binder to formulate flexible and tough topcoats with high melting points and is app...view more JK-230F, in the form of a clear anionic liquid, is NMP free aqueous polyurethane polymer dispersion with good abrasion and adhesion resistance. It can be used as a primary binder to formulate flexible and tough topcoats with high melting points and is applicable for all types of leather finishes. view less | |
| BASONAT® HW 2100 | BASF Dispersions & Resins | BASONAT HW 2100 is a polyfunctional isocyanate for high-quality waterborne 2K PU coatings. It is used as a hardener for polymer dispersions containing reactive OH groups. In combination with water=based OH functional binder, it allows formulation of eco-f...view more BASONAT HW 2100 is a polyfunctional isocyanate for high-quality waterborne 2K PU coatings. It is used as a hardener for polymer dispersions containing reactive OH groups. In combination with water=based OH functional binder, it allows formulation of eco-friendly and durable high-performance 2K PU industrial coatings. view less | |
| UROTUF® L56-MPW-36 | Polynt Composites | UROTUF® L56-MPW-36 is a fully reacted, aqueous dispersion of an aliphatic urethane polymer that can be used in adhesives, textile coatings, leather finishes, and as a binder modifier for non-woven fabrics. This product features good water resistance, low-...view more UROTUF® L56-MPW-36 is a fully reacted, aqueous dispersion of an aliphatic urethane polymer that can be used in adhesives, textile coatings, leather finishes, and as a binder modifier for non-woven fabrics. This product features good water resistance, low-temperature flexibility, and is stable through repeated freeze/thaw cycles. view less | |
| VINAVIL® CRILAT 1815 | VINAVIL Americas Corp. | VINAVIL® CRILAT 1815, in the form of a transparent, colourless film, is an aqueous dispersion of a soft, self-crosslinkable acrylic polymer. This product is dispersed in an anionic/non-ionic surfactant, and can be used in gloss paints, enamels, and as a ...view more VINAVIL® CRILAT 1815, in the form of a transparent, colourless film, is an aqueous dispersion of a soft, self-crosslinkable acrylic polymer. This product is dispersed in an anionic/non-ionic surfactant, and can be used in gloss paints, enamels, and as a pigment binder in textile screen printing applications. It is resistant to chlorinated solvents. view less | |
| EFKA® FA 4665 | BASF Formulation Additives | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, s...view more EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. view less | |
| Torlon® AI-10 | Solvay Specialty Polymers | Torlon® AI-10 is a polyamideimide (PAI) powder developed for the performance coatings industry. As a liquid polymer solution, the resin is incorporated into the formulation of engineered coatings; often as the principal primer, binder or high temperature ...view more Torlon® AI-10 is a polyamideimide (PAI) powder developed for the performance coatings industry. As a liquid polymer solution, the resin is incorporated into the formulation of engineered coatings; often as the principal primer, binder or high temperature adhesive component. As a powder, the resin is used in specialty composites and unique dry spray applications. view less | |
| VINNAPAS® EP 3360 | Wacker Chemical Corporation | VINNAPAS® EP 3360 is an aqueous polymer dispersion based on vinyl acetate and ethylene and is free from plasticizers and solvents. It has an exceptionally high binding power and is suitable as a binder for indoor-paints as well as dispersion based indoor-...view more VINNAPAS® EP 3360 is an aqueous polymer dispersion based on vinyl acetate and ethylene and is free from plasticizers and solvents. It has an exceptionally high binding power and is suitable as a binder for indoor-paints as well as dispersion based indoor-plasters. VINNAPAS® EP 3360 is applied in emulsion paint and interior paints. view less | Request Sample |
| VINNAPAS® EAF 380 | Wacker Chemical Corporation | VINNAPAS® EAF 380 is an aqueous polymer-dispersion based on vinyl acetate, ethylene and acrylate designed for interior and exterior applications. It is free from alkyl phenol ethoxylate (APEO) containing compounds. It is suitable as a binder for inter...view more VINNAPAS® EAF 380 is an aqueous polymer-dispersion based on vinyl acetate, ethylene and acrylate designed for interior and exterior applications. It is free from alkyl phenol ethoxylate (APEO) containing compounds. It is suitable as a binder for interiour and exteriour paints as well as for plasters and thermal insulation systems. Furthermore VINNAPAS® EAF 380 is a suitable binder for heavy duty interior gloss- and semigloss paints with a very low blocking tendency. It can be applied in coatings, emulsion paint, interior paints, silicate emulation paints and silicone resin emulsion paints. view less | Request Sample |
| Resiflow® S | Estron Chemical, Inc. | Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder...view more Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder content. Resiflow® S is suitable for solvent borne coatings including primers and coil coatings. view less | |
| TEGO® Dispers 690 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 690 is a high molecular weight polymer used as a pigment wetting and dispersing additive. It is designed specifically for solventborne printing inks used in food packaging. By using this product in solventborne, PU-containing or binder-free ...view more TEGO® Dispers 690 is a high molecular weight polymer used as a pigment wetting and dispersing additive. It is designed specifically for solventborne printing inks used in food packaging. By using this product in solventborne, PU-containing or binder-free pigment dispersions, high pigment loadings can be achieved due to strong viscosity reduction. TEGO® Dispers 690 is highly compatible with various PU and NC binder types and works well with organic pigments, carbon blacks and titanium dioxide. It is also especially effective in gravure and flexo inks for lamination applications. view less | Request Sample |
| TEGOMER® D 3403 | Evonik Operations GmbH, BL Coating Additives | TEGOMER® D 3403 is a non-ionic, waxy, organic polymer. It is silicone- and solvent-free. It is also free of alkylphenolethoxylates (APEs) and free of aromatic components. This product is dilutable by esters, ketones and glycol ethers as well as dilutable ...view more TEGOMER® D 3403 is a non-ionic, waxy, organic polymer. It is silicone- and solvent-free. It is also free of alkylphenolethoxylates (APEs) and free of aromatic components. This product is dilutable by esters, ketones and glycol ethers as well as dilutable with water and suitable solvents in nearly any ratio. It is used for co-binder applications. view less | Request Sample |
| Resiflow® PV-88 | Estron Chemical, Inc. | Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Re...view more Resiflow® PV-88 is widely known for its reliable performance as a flow control agent for general industrial powder coatings. It is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow ® PV-88 is well suited for a spectrum of common binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product i...view more Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product is used as a thickener, protective colloid, binder, stabilizer, and suspending agent, particularly in applications where a nonionic material is desired. view less | |
| RHOPLEX 1785 | Univar Solutions | RHOPLEX 1785 is a high performance 55% solids acrylic latex binder designed for sealant compounds, provides excellent joint movement capability, adhesion and durability, with superior wet and dry adhesion properties. Sealant formulations cling tenaciously...view more RHOPLEX 1785 is a high performance 55% solids acrylic latex binder designed for sealant compounds, provides excellent joint movement capability, adhesion and durability, with superior wet and dry adhesion properties. Sealant formulations cling tenaciously to a wide variety of construction substrates including glass, steel, and concrete. In addition to excellent adhesion, the product provides excellent durability. This polymer is characterized by good water resistance and the unsurpassed ultraviolet stability associated with acrylic chemistry. In addition, a unique proprietary design gives the binder exceptional Aymar durability. Formulations based on this product can tolerate 25% joint movement without cracking or rupturing. view less | Request Sample |
| RayVace® 678 | Specialty Polymers | RayVace® 678 is an APEO and formaldehyde free vinyl acrylic emulsion polymer, designed specifically for interior flat and semigloss coatings. This environmentally friendly, new generation binder provides superior scrub resistance and stain removal charact...view more RayVace® 678 is an APEO and formaldehyde free vinyl acrylic emulsion polymer, designed specifically for interior flat and semigloss coatings. This environmentally friendly, new generation binder provides superior scrub resistance and stain removal characteristics. It exhibits excellent color acceptance and good compatibility with rheology modifiers. Suggested for use in interior architectural primers, interior architectural flats, and interior architectural semi gloss. view less | |
| Colanyl Black N 500 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main app...view more Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Black N 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Black N 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Black N 500 has to be checked in the customer paint system itself. view less | Request Sample |
| Reactol™ 3107 A | Lawter | Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use ...view more Reactol™ 3107 A is a condensate resin polymer which rids bleeding of dyes when moisture and grease are present. It enhances solubility of dyes in solvent systems with greater dye concentrations leading to better tint strength and gloss. The exclusive use of the resin binder eliminates discoloration tendencies, leading to cleaner colors. The product is used in liquid inks and coatings and in wood stains and lacquers. view less | |
| VINNAPAS® EP 3355 | Wacker Chemical Corporation | VINNAPAS® EP 3355 is an aqueous polymer dispersion based on vinyl acetate and ethylene and is free from plasticizers and solvents. Additionally it is free from alkyl phenol ethoxylate (APEO) containing compounds. It has an exceptionally high binding power...view more VINNAPAS® EP 3355 is an aqueous polymer dispersion based on vinyl acetate and ethylene and is free from plasticizers and solvents. Additionally it is free from alkyl phenol ethoxylate (APEO) containing compounds. It has an exceptionally high binding power and is suitable as a binder for indoor-paints as well as dispersion based indoor-plasters. VINNAPAS® EP 3355 can be applied in emulsion paints and interior paints. view less | Request Sample |
| Hycar® FF 26916 | Lubrizol Advanced Materials, Inc. | Hycar® FF 26916 is a formaldehyde and APE-free acrylic emulsion polymer that provides outstanding dry and wet physical properties when used as a binder to saturate paper, glass and polyester substrates without formaldehyde emissions. It also provides good...view more Hycar® FF 26916 is a formaldehyde and APE-free acrylic emulsion polymer that provides outstanding dry and wet physical properties when used as a binder to saturate paper, glass and polyester substrates without formaldehyde emissions. It also provides good solvent resistance to saturated substrates. Hycar FF 26916 can also be used in coating applications requiring superior high solids formulation stability and excellent scrub resistance. view less | |
| RHOPLEX™ MULTILOBE 400 | Univar Solutions | RHOPLEX™ MULTILOBE 400 is an APEO (alkyl phenol ethoxylate) surfactant free binder for low-VOC exterior flat and satin paints, providing excellent durability, color retention, and dirt pick-up resistance. It enhances film-build performance and reduces thi...view more RHOPLEX™ MULTILOBE 400 is an APEO (alkyl phenol ethoxylate) surfactant free binder for low-VOC exterior flat and satin paints, providing excellent durability, color retention, and dirt pick-up resistance. It enhances film-build performance and reduces thickener demand. Also, polymer composition has been modified to a slightly lower Tg relative to MULTILOBE™ 200 in order to optimize the balance of properties with lower co-solvent levels. view less | Request Sample |
| VINNAPAS® EZ 3010 | Wacker Chemical Corporation | VINNAPAS® EZ 3010 is an aqueous Polymer dispersion based on vinyl acetate and ethylene. It is produced without the addition of any plasticizers or solvents. Additionally it is free from alkyl phenol ethoxylate (APEO) containing compounds. VINNAPAS® EZ 301...view more VINNAPAS® EZ 3010 is an aqueous Polymer dispersion based on vinyl acetate and ethylene. It is produced without the addition of any plasticizers or solvents. Additionally it is free from alkyl phenol ethoxylate (APEO) containing compounds. VINNAPAS® EZ 3010 (CGN) is a most suitable binder for interior paints as well as for synthetic resin bound interior plasters. It can be applied in emulsion paints, interior paints and intumescent coatings. view less | Request Sample |
| Resiflow® P-67 | Estron Chemical, Inc. | Resiflow® P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries. This applies to chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. This product is base...view more Resiflow® P-67 is a flow and leveling agent known for its suitability and reliable performance across the spectrum of binder chemistries. This applies to chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. This product is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto silica-type filler. Resiflow® P-67 has a broad compatibility between powder coatings, which is another key characteristic of it. view less | |
| RHOPLEX GL-720 | Univar Solutions | RHOPLEX GL-720 is an all-acrylic firm polymer emulsion specifically designed for bonding wet laid glass mat that can be used in roofing products such as built-up roofing (BUR) and asphalt shingles. It is especially useful in high-speed operations because ...view more RHOPLEX GL-720 is an all-acrylic firm polymer emulsion specifically designed for bonding wet laid glass mat that can be used in roofing products such as built-up roofing (BUR) and asphalt shingles. It is especially useful in high-speed operations because it is fast drying and delivers maximum tensile strength. This stiff binder is also suggested for use as an additive to improve performance in other industrial nonwoven applications such as filtration media. view less | Request Sample |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...view more IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. view less | |
| Raw Linseed Oil | SWISLOYD LIMITED | Raw Linseed Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 3 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment binder in o...view more Raw Linseed Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 3 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment binder in oil paints, and in the paint industry for the production of alkyd resins, drying oil finish or varnish in wood finishing. view less | |
| Refined Linseed Oil | SWISLOYD LIMITED | Refined Linseed Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 0.5 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment binde...view more Refined Linseed Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 0.5 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment binder in oil paints, and in the paint industry for the production of alkyd resins, drying oil finish or varnish in wood finishing. view less | |
| Double Boiled Linseed Oil | SWISLOYD LIMITED | Double Boiled Linseed Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 5 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment b...view more Double Boiled Linseed Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 5 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment binder in oil paints, and in the paint industry for the production of alkyd resins, drying oil finish or varnish in wood finishing. view less | |
| Pale Boiled Linseed Oil | SWISLOYD LIMITED | Pale Boiled Linseed Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 4 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment bin...view more Pale Boiled Linseed Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 4 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment binder in oil paints, and in the paint industry for the production of alkyd resins, drying oil finish or varnish in wood finishing. view less | |
| Linseed Stand Oil | SWISLOYD LIMITED | Linseed Stand Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 12 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment binder i...view more Linseed Stand Oil is obtained from the dried, ripened seeds of the flax plant. This product is a drying oil with polymer-forming properties, and it has an acid value of 12 mgKOH/g and an iodine value of 175 gl2/100g. It is often used as a pigment binder in oil paints, and in the paint industry for the production of alkyd resins, drying oil finish or varnish in wood finishing. view less | |
| Borchi® Gen 1051 | Borchers, A Company of OMG | Borchi® Gen 1051 is a polyurethane polymer-based wetting and dispersing additive with outstanding wetting and deflocculating properties. It is intended specifically for high-grade solventborne applications. This product is particularly recommended for use...view more Borchi® Gen 1051 is a polyurethane polymer-based wetting and dispersing additive with outstanding wetting and deflocculating properties. It is intended specifically for high-grade solventborne applications. This product is particularly recommended for use in high-grade industrial coatings such as automotive-OEM and repair coatings, as well as in pigmented furniture finishes. Its main area of use is in two-component polyurethane-based systems and it shows optimal compatibility in medium-polar binder systems. view less | |
| PChem® MB-11-A | Pioneer Chemicals Co., Ltd. | PChem® MB-11-A, in the form of a bead, is a poly (ethyl methacrylate) polymer and is soluble in aliphatic hydrocarbon solvents, alcohols, and esters. It is a binder for applications of flexographic inks, silk screen inks, and resin for printing ink. PChem...view more PChem® MB-11-A, in the form of a bead, is a poly (ethyl methacrylate) polymer and is soluble in aliphatic hydrocarbon solvents, alcohols, and esters. It is a binder for applications of flexographic inks, silk screen inks, and resin for printing ink. PChem® MB-11-A has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value less than 9.0 mgKOH/g, and an inherent viscosity of 0.27. view less | |
| TEGO® Dispers 628 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 628 is a wetting and dispersing additive for solventborne coatings. It is a clear to slightly hazy liquid solution of a high molecular weight polymer. TEGO® Dispers 628 is used for automotive and industrial coatings wood and furniture coatin...view more TEGO® Dispers 628 is a wetting and dispersing additive for solventborne coatings. It is a clear to slightly hazy liquid solution of a high molecular weight polymer. TEGO® Dispers 628 is used for automotive and industrial coatings wood and furniture coatings solventborne pigment preparations inkjet inks. It is suitable for pigment concentrates and for direct grinds (with binder). It is used particularly for inorganic pigments improving the flow and gloss due to pigment deflocculation. It has outstanding viscosity reduction and excellent colorant acceptance. view less | Request Sample |
| PChem® MB-244 | Pioneer Chemicals Co., Ltd. | PChem® MB-244, in the form of a bead, is a polymer of n- butyl methacrylate that is soluble in chlorinated hydrocarbons, aromatic, esters, glycol ether acetates, ketones, glycol ethers, and is compatible with alkyd resins. It is a binder for adhesion of p...view more PChem® MB-244, in the form of a bead, is a polymer of n- butyl methacrylate that is soluble in chlorinated hydrocarbons, aromatic, esters, glycol ether acetates, ketones, glycol ethers, and is compatible with alkyd resins. It is a binder for adhesion of polystyrene and aluminum and is good for applications of pigmented lacquer. It has a molecular weight of 140,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.51. view less | |
| SYNTEVEN 404 | DKSH | SYNTEVEN 404 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 404 is used as full binder for highly filled knifing fillers for metal, wood and mineral substra...view more SYNTEVEN 404 is a styrenic DCPD-modified unsaturated polyester resin, amine (polymeric) promoted, with high reactivity and high stability properties. SYNTEVEN 404 is used as full binder for highly filled knifing fillers for metal, wood and mineral substrates. SYNTEVEN 404 is a fast cold-curing resin, even at low temperatures. After addition of benzoyl peroxide (BPO) it yields a middle hard polymer. Fillers based on SYNTEVEN 404 cure fully both applied in thick and thin coats and they are particularly suitable in the field of car body repairing. view less | Request Sample |
| Colanyl Blue A2R 500 - Pigment Blue 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main ap...view more Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Blue A2R 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Blue A2R 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Blue A2R 500 has to be checked in the customer paint system itself. By using Colanyl Blue A2R 500 in automatic and manual dispensers, excellent accuracy and reliability when poured or pumped have been observed. Furthermore, Colanyl Blue A2R 500 is miscible in all proportions with other Colanyl 500 preparations. By adding Colanyl Extender MS 530, the color strength of Colanyl Blue A2R 500 can be adjusted. view less | Request Sample |
| Silane Coupling Agent KH-151 | Zhejiang Feidian Chemical Co., Ltd. | KH-151 silane, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radical mechanisms-copolymerization or grafting and to modify surfaces. It is used as a coupling agent in filled polymer systems, which cure via a free radical mechanism. It is also is used as a finish for glass or a binder...view more KH-151 silane, vinyltriethoxysilane, is a vinyl-functional silane that may be used to improve the bond between glass fiber or mineral fillers and resins that are reactive towards the vinyl group. It is also employed to functionalize resins via free radical mechanisms-copolymerization or grafting and to modify surfaces. It is used as a coupling agent in filled polymer systems, which cure via a free radical mechanism. It is also is used as a finish for glass or a binder additive in glass-reinforced polyester resins, as well as an integral additive in mineral-filled polyester or DAP resin compounds. view less | |
| PChem® MB-38 | Pioneer Chemicals Co., Ltd. | PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including...view more PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including chlorinated rubber resins, nitrocellulose, acrylics, vinyl, and is a good binder for manufacturer of alkyd resins additive, printing inks, heat sealing lacquers for adhesives and aluminum foils, ceramic transfer lacquers, and primers. PChem® MB-38 has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.31. view less | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM is an activated SILFIT Z 91 that can be used as a functional filler either on its own or combined with extenders or matting agents. The best effect is achieved in binder systems which polymerize or cure due to a radically initiated reaction. | |
| JEFFSOL® PROPYLENE CARBONATE | Huntsman Performance Products | An excellent solvent for many organic and inorganic materials in such applications as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons, and natural gas. A gellant for clays and a binder for foundry sand molds. | |
| NEa-20 | Kowa American Corporation | NEa-20 is the newest offering low MW liquid functional acrylate polymers. The NEa-20 is a trimethoxysilane functionalized polymer that moisture cures without tin catalysts, with excellent weathering properties, and can be used as a reactive plasticizer i...view more NEa-20 is the newest offering low MW liquid functional acrylate polymers. The NEa-20 is a trimethoxysilane functionalized polymer that moisture cures without tin catalysts, with excellent weathering properties, and can be used as a reactive plasticizer in sealant and coatings or the main resin component. view less | Request Sample |
| Heucofloor - Blue 590 02EP | Heubach Ltd | Heucofloor - Blue 590 02EP is a monopigment paste created for the coloration of thickfilm systems based on solventless epoxy-binders. It has a broad application field for polymer floor coatings. | Request Sample |
| EPS® 2741 | EPS Materials | EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architect...view more EPS® 2741 is a 100% acrylic film-forming polymer that is an excellent choice for high performance flat through semi-gloss interior and exterior architectural coatings. It is a versatile polymer offering excellent performance when formulated into Architectural DIY and/or Professional paint formulations. view less | Request Sample |
| EPS® 2133 | EPS Materials | EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film ...view more EPS® 2133 is an all-acrylic polymer made without APEO surfactants that can be formulated for permanent and removable pressure-sensitive adhesive applications. This product can also be used in formulating plasticizer-free pigmented caulks and film-to-film lamination. Typical values below are for the neat polymer. This polymer is not FDA-approved. view less | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder...view more POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. view less | Request Sample |
| Ottopol SF-45 | Gellner Industrial, LLC | Ottopol SF-45 is a translucent, anionic acrylic emulsion. This unique acrylic polymer results in a high density, cross linked polymer upon drying at room temperature. Many coatings can be derived from this polymer where solvent resistance is required. | |
| NEOPRENE NPR 2008 | Univar Solutions | NEOPRENE NPR 2008 is a high viscosity Neoprene polymer designed specifically to provide improved solution characteristics when compared to Neoprene WHV which is intended primarily for rubber goods. Raw polymer stabilility is excellent. . | Request Sample |
| VINNOL® E 15/45 M TF | Wacker Chemical Corporation | VINNOL® E 15/45 M TF is a carboxylate-containing terpolymer of approx. 84 wt. %vinyl chloride (VC) approx. 15 wt. % vinyl acetate (VAc) and approx. 1 wt. % dicarboxylic acid. Its main use is as a binder for surface coating compounds and printing inks. | Request Sample |
| MOR-GLO™ 877 | Synthomer | MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes...view more MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes. It can be used as sole polymer or blended with others. view less | |
| POLYVEST® eCO HT Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a ...view more POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® eCO HT Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO HT Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO HT Bio can be used in various applications. view less | Request Sample |
| McGean GRQ-70 Polyquaternium 2 | McGean-Rohco, Inc. | McGean GRQ-70 Polyquaternium 2 is a water soluble cationic polymer used in the manufacturing of additives for zinc and zinc alloys electroplating baths. | |
| KANEKA MS POLYMER® S203H | Kaneka North America LLC | KANEKA MS POLYMER® S203H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S203H has performed successfully in various industrial applications and provid...view more KANEKA MS POLYMER® S203H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S203H has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less | Request Sample |
| KANEKA MS POLYMER® S227 | Kaneka North America LLC | KANEKA MS POLYMER® S227 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S227 has performed successfully in various industrial applications and provides...view more KANEKA MS POLYMER® S227 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S227 has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less | Request Sample |
| KANEKA MS POLYMER® S303H | Kaneka North America LLC | KANEKA MS POLYMER® S303H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S303H has performed successfully in various industrial applications and provid...view more KANEKA MS POLYMER® S303H is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S303H has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less | Request Sample |
| KANEKA MS POLYMER® S327 | Kaneka North America LLC | KANEKA MS POLYMER® S327 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S327 has performed successfully in various industrial applications and provides...view more KANEKA MS POLYMER® S327 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. MS Polymer® S327 has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups. view less | Request Sample |
| RHOPLEX 2019RX | Univar Solutions | RHOPLEX 2019RX is a styrene acrylic polymer emulsion for use in flexible coatings. When properly formulated and applied, new RHOPLEX 2019RX polymer gives the formulator access to a general purpose maintenance coating for metal and asphalt roofing surfaces...view more RHOPLEX 2019RX is a styrene acrylic polymer emulsion for use in flexible coatings. When properly formulated and applied, new RHOPLEX 2019RX polymer gives the formulator access to a general purpose maintenance coating for metal and asphalt roofing surfaces suitable for moderate climates. New RHOPLEX 2019RX offers the following improved features over Rohm and Haas RHOPLEX 1019, and other styrene acrylic polymers. view less | Request Sample |
| AQUACER 8075 | Univar Solutions | AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio o...view more AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8075 is compatible with all known polymer dispersions and plasticizers. view less | Request Sample |
| NEOPRENE WB | Univar Solutions | NEOPRENE WB is a non-staining polychloroprene that contains a high percentage of gel polymer. | Request Sample |
| EPOTAL® A 480 | BASF Dispersions & Resins | EPOTAL A 480 is a coater-ready aqueous acrylic polymer dispersion free of plasticizers and solvents used as a halogen-free barrier coating used for paperboard packaging. | |
| STAR-POL 136 | Univar Solutions | STARPOL 136 is a modified waxy corn based starch polymer that is an easily dispersible, highly substituted, nonionic water soluble polymer designed to be used at lower solids levels in wall treatments, adhesives, tile mortar, tile grout, oil drilling mud ...view more STARPOL 136 is a modified waxy corn based starch polymer that is an easily dispersible, highly substituted, nonionic water soluble polymer designed to be used at lower solids levels in wall treatments, adhesives, tile mortar, tile grout, oil drilling mud as well as a number of other applications. . view less | Request Sample |
| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...view more Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. view less | |
| RHOPLEX AS-48 | Univar Solutions | RHOPLEX AS-48 is an acrylic-styrene polymer supplied in water at 56% solids by weight. Using this product in a cementitious mortar offers enhanced flexibility. Cured mortars modified with this polymer also have excellent water resistance and adhesion prop...view more RHOPLEX AS-48 is an acrylic-styrene polymer supplied in water at 56% solids by weight. Using this product in a cementitious mortar offers enhanced flexibility. Cured mortars modified with this polymer also have excellent water resistance and adhesion properties. view less | Request Sample |
| AQUACER 8976 | Univar Solutions | AQUACER 8976 improves buffability, increases filling capacity and produces a strong anti-slip effect. The above mentioned properties are generated by mixing AQUACER 8976 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 i...view more AQUACER 8976 improves buffability, increases filling capacity and produces a strong anti-slip effect. The above mentioned properties are generated by mixing AQUACER 8976 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8976 is compatible with all known polymer dispersions and plasticizers. view less | Request Sample |
| X-206-257E | STI Polymer | X-206-257E is a white liquid form acrylic polymer. This product is most commonly used as a coating in architectural applications. | |
| Sycoat 273 | STI Polymer | Sycoat 273 is a milky white liquid form acrylic polymer. This product is most commonly used in finished metal coatings and primer applications. | |
| SETAQUA® 6768 | Allnex | SETAQUA® 6768 is a surfactant free aqueous dispersion of acrylic polymers. | Request Sample |
