| GP CL-7004 | Univar Solutions | GP CL-7004 is a thermoplastic novolac resin used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings. . | Request Sample |
| CRYLCOAT® 2614-2 | Allnex | CRYLCOAT® 2614-2 is a TMA-free carboxylated polyester resin for use with a low demand of Primid® XL-552 to produce tribo applicable powder coatings. Formulations based on CRYLCOAT® 2614-2 exhibit good outdoor durability and very good flow. | Request Sample |
| CERAFLOUR® 970 | BYK | CERAFLOUR® 970 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of micronized polypropylene wax. This product improves surface anti-slip and reduced gloss properties. | Request Sample |
| Pigment Yellow 13 (Corimax Yellow GR) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Yellow 13 (Corimax Yellow GR) is a disazo yellow pigment with good heat and light fastness. It is recommended for powder coatings, textile printing, offset inks, water-based inks, and for various plastic applications. | |
| CRYLCOAT® 2695-0 | Allnex | CRYLCOAT® 2695-0 is a low reactive carboxyl functional polyester resin for use with Primid® XL-552 or TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2695-0 exhibit very good outdoor durability while requiring low hardener deman...view more CRYLCOAT® 2695-0 is a low reactive carboxyl functional polyester resin for use with Primid® XL-552 or TGIC in the production of powder coatings. Formulations based on CRYLCOAT® 2695-0 exhibit very good outdoor durability while requiring low hardener demand. view less | Request Sample |
| Isocryl® EP-455 | Estron Chemical, Inc. | Isocryl® EP-455 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® ...view more Isocryl® EP-455 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® EP-455, with a Tg of 59°C, demonstrates a balance of properties between Isocryl® EP-450 and EP-555 for finished powder coating stability and cured film smoothness. view less | |
| Escat™ 22 | Estron Chemical, Inc. | Escat™ 22 is a powder coating additive capable of improving the mechanical and solvent resistance properties. Escat™ 22 can be used in matte polyester powder coatings cured with the Isocryl matting hardeners EP-550, EP-560 and EP-570. | |
| Pigment Blue 15:4 (Corimax Blue BF441) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Blue 15:4 (Corimax Blue BF441) is a universal type phthalocyanine blue pigment. It is recommended for automotive, decorative, coil, general industrial, and powder coatings, textile printing, and solvent-based and UV based inks. | |
| CRYLCOAT® 2409-0 | Allnex | CRYLCOAT® 2409-0 is a TMA-free, highly reactive carboxylated polyester resin for use with TGIC in the production of powder coatings. Coatings based on CRYLCOAT® 2409-0 exhibit outstanding flow with excellent outdoor durability and are stabilized for use i...view more CRYLCOAT® 2409-0 is a TMA-free, highly reactive carboxylated polyester resin for use with TGIC in the production of powder coatings. Coatings based on CRYLCOAT® 2409-0 exhibit outstanding flow with excellent outdoor durability and are stabilized for use in direct-fire gas ovens. view less | Request Sample |
| Grilonit® P 6835 | EMS-CHEMIE AG (PRIMID) | Grilonit® P 6835 is a thermoplastic modified co-polyamide additive that has improved abrasion resistance, enhanced slip coverage, and improved edge coverage. This product is used to produce nylon modified polyester and hybrid powder coatings. | |
| CRYLCOAT® 2687-2 | Allnex | CRYLCOAT® 2687-2 is a Primid® resin designed for matte one-shot systems to produce in combination with CRYLCOAT® 2611-0 powder coatings with 60° gloss between 5-10%. Coatings exhibit very good mechanical properties, flow and outdoor durability. | Request Sample |
| CRYLCOAT® 2433-2 | Allnex | CRYLCOAT® 2433-2 is a highly reactive carboxylated polyester resin designed for use with TGIC in a 93/7 ratio in the production of powder coatings. Formulations based on CRYLCOAT® 2433-2 exhibit good flow, high flexibility and excellent outdoor weathering...view more CRYLCOAT® 2433-2 is a highly reactive carboxylated polyester resin designed for use with TGIC in a 93/7 ratio in the production of powder coatings. Formulations based on CRYLCOAT® 2433-2 exhibit good flow, high flexibility and excellent outdoor weathering resistance. view less | Request Sample |
| PIGMENT RED PR170 F3RK, C.I.NO.: PR170 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 170, C.I.NO.: PR170 F3RK70,HP Red 2130 is an AZO pigments with middium red shade, C.I.NO.: PR170,it is an opaque, high solvent stability, mainly used for industrial coatings, powder coatings, and also for PP, PVC colorants. | |
| HEUCOSIN® Fast Green G 1931 | Heubach Ltd | HEUCOSIN® Fast Green G 1931 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 4.7 g/cm^3, a bulk volume of 2.0 I/kg, and an oil absorption of 16 g/100g. I...view more HEUCOSIN® Fast Green G 1931 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 4.7 g/cm^3, a bulk volume of 2.0 I/kg, and an oil absorption of 16 g/100g. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| HEUCOSIN® Fast Yellow G 5891 | Heubach Ltd | HEUCOSIN® Fast Yellow G 5891 is a lead chromate free yellow powder pigment preparation of inorganic and/or organic pigments with extenders. This product has a specific gravity of 3.4 g/cm^3, a bulk volume of 2.5 I/kg, and an oil absorption of 21 g/100g. I...view more HEUCOSIN® Fast Yellow G 5891 is a lead chromate free yellow powder pigment preparation of inorganic and/or organic pigments with extenders. This product has a specific gravity of 3.4 g/cm^3, a bulk volume of 2.5 I/kg, and an oil absorption of 21 g/100g. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| HEUCOSIN® Fast Green G 6861 | Heubach Ltd | HEUCOSIN® Fast Green G 6861 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 4.2 g/cm^3, a bulk volume of 1.4 I/kg, and an oil absorption of 14 g/100g. I...view more HEUCOSIN® Fast Green G 6861 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 4.2 g/cm^3, a bulk volume of 1.4 I/kg, and an oil absorption of 14 g/100g. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| HEUCOSIN® Fast Green G 6860 | Heubach Ltd | HEUCOSIN® Fast Green G 6860 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 4.2 g/cm^3, a bulk volume of 1.7 I/kg, and an oil absorption of 14 g/100g. I...view more HEUCOSIN® Fast Green G 6860 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 4.2 g/cm^3, a bulk volume of 1.7 I/kg, and an oil absorption of 14 g/100g. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| Resiflow® P-64F | Estron Chemical, Inc. | Resiflow® P-64F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-64F which has been converted into free-flowing powder by adsorption onto silica-type carrier....view more Resiflow® P-64F is a specialty flow control agent designed for powder coating systems. It is based on the carboxyl functional acrylic polymer product Resiflow® L-64F which has been converted into free-flowing powder by adsorption onto silica-type carrier. Resiflow® P-64F provides unique characteristics in a variety of powder coating formulations. In isocryl H-1871 formulations it is a key ingredient in one-shot, low to mid-gloss formulations.In PE-TGIC, hybrid and epoxy clearcoats it provides a balance of flow and clarity. In GMA Acrylic-DDDA clearcoat formulations it provides recoatability, clarity and appearance. In classical, pigmented powder coatings, Resiflow® P-64F enhances pigment wetting and displaces substrate moisture. view less | |
| HDK® H2000 | Wacker Chemical Corporation | HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is use...view more HDK® H2000 is a synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and is applied in powder coatings, reinforcement of mechanical properties and also as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H2000 is used as a free flow additive in the production of technical powders and as additive in antifoam agents. view less | Request Sample |
| Ti-Pure™ R-900 | Chemours Titanium Technologies | Ti-Pure™ R-900 is a rutile titanium dioxide pigment manufactured by the chloride process for general interior coatings applications. It is a fine dry powder with the following general properties. Ti-Pure™ R-900 is a general-purpose interior pigment com...view more Ti-Pure™ R-900 is a rutile titanium dioxide pigment manufactured by the chloride process for general interior coatings applications. It is a fine dry powder with the following general properties. Ti-Pure™ R-900 is a general-purpose interior pigment combining good gloss, high hiding power, and excellent dispersion. Recommended use is in interior architectural coatings, interior industrial coatings, powder coatings, coil coatings, container coatings, and electrodeposition applications. view less | |
| HEUCOSIN® Fast Yellow G 7639 N | Heubach Ltd | HEUCOSIN® Fast Yellow G 7639 N is a dry yellow powder pigment preparation of inorganic and/or organic pigments with extenders. It is lead chromate free, and has a specific gravity of 3.4 g/cm^3, a bulk volume of 1.6 I/kg, and an oil absorption of 20 g/100...view more HEUCOSIN® Fast Yellow G 7639 N is a dry yellow powder pigment preparation of inorganic and/or organic pigments with extenders. It is lead chromate free, and has a specific gravity of 3.4 g/cm^3, a bulk volume of 1.6 I/kg, and an oil absorption of 20 g/100g. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| HEUCOSIN® Fast Yellow G 7622 | Heubach Ltd | HEUCOSIN® Fast Yellow G 7622 is a lead chromate free dry yellow powder pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solven...view more HEUCOSIN® Fast Yellow G 7622 is a lead chromate free dry yellow powder pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. This product has a specific gravity of 3.4 g/cm^3, a bulk volume of 1.4 I/kg, and an oil absorption of 14 g/100g. view less | Request Sample |
| HEUCOSIN® Fast Yellow G 7604 | Heubach Ltd | HEUCOSIN® Fast Yellow G 7604 is a dry lead chromate free yellow powder pigment preparation of inorganic and/or organic pigments with extenders. This product has a specific gravity of 2.4 g/cm^3, a bulk volume of 2.5 I/kg, and an oil absorption of 19 g/100...view more HEUCOSIN® Fast Yellow G 7604 is a dry lead chromate free yellow powder pigment preparation of inorganic and/or organic pigments with extenders. This product has a specific gravity of 2.4 g/cm^3, a bulk volume of 2.5 I/kg, and an oil absorption of 19 g/100g. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| HEUCOSIN® Fast Orange G 7627 | Heubach Ltd | HEUCOSIN® Fast Orange G 7627 is a dry lead chromate free orange powder pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solven...view more HEUCOSIN® Fast Orange G 7627 is a dry lead chromate free orange powder pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. This product has a specific gravity of 2.2 g/cm^3, a bulk volume of 2.5 I/kg, and an oil absorption of 32 g/100g. view less | Request Sample |
| HEUCOSIN® Fast Red G 14678 | Heubach Ltd | HEUCOSIN® Fast Red G 14678 is a lead chromate free dry red powder pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent bas...view more HEUCOSIN® Fast Red G 14678 is a lead chromate free dry red powder pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. This product has a specific gravity of 3.0 g/cm^3, a bulk volume of 2.0 I/kg, and an oil absorption of 17 g/100g. view less | Request Sample |
| HEUCOSIN® Fast Blue G 3276 N | Heubach Ltd | HEUCOSIN® Fast Blue G 3276 N is a lead chromate free blue powder pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent base...view more HEUCOSIN® Fast Blue G 3276 N is a lead chromate free blue powder pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. This product has a specific gravity of 4.1 g/cm^3, a bulk volume of 2.0 I/kg, and an oil absorption of 13 g/100g. view less | Request Sample |
| Verdcol® DL Yellow 83 SO | Verdcol Ltd | Verdcol® DL Yellow 83 SO is a red shade yellow pigment with good saturation and hiding power. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in industrial coatings, powder coatings, and coil coating...view more Verdcol® DL Yellow 83 SO is a red shade yellow pigment with good saturation and hiding power. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in industrial coatings, powder coatings, and coil coatings. It may also find use in decorative coatings and automotive coatings. view less | |
| Gap 895 | Metapol | Gap 895, in the form of a particle-sized flake, is a leafing aluminum pigment in an aliphatic solvent powder that can be used in powder coatings and inks. This product's average particle diameter ranges between 7.8-9.5 um. | |
| CRYLCOAT® 1573-0 | Allnex | CRYLCOAT® 1573-0 is a medium reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a 50/50 ratio for the manufacture of hybrid powder coatings. Formulations based on CRYLCOAT® 1573-0 exhibit excellent flow with very good gl...view more CRYLCOAT® 1573-0 is a medium reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a 50/50 ratio for the manufacture of hybrid powder coatings. Formulations based on CRYLCOAT® 1573-0 exhibit excellent flow with very good gloss. view less | Request Sample |
| CRYLCOAT® 1781-0 | Allnex | CRYLCOAT® 1781-0 is a carboxyl functional polyester resin for use with epoxy resins in a 70/30 ratio to manufacture hybrid powder coatings. Formulations based on CRYLCOAT® 1781-0 provide good flow and very good gloss with a very high glass transition temp...view more CRYLCOAT® 1781-0 is a carboxyl functional polyester resin for use with epoxy resins in a 70/30 ratio to manufacture hybrid powder coatings. Formulations based on CRYLCOAT® 1781-0 provide good flow and very good gloss with a very high glass transition temperature. view less | Request Sample |
| VESTAGON® B 1400 | Evonik Operations GmbH, BL Crosslinkers | VESTAGON® B 1400 is a crosslinking agent for polyurethane powder coatings. It is a polyisocyanate adduct used in combination with hydroxy functional resins. Due to the ε-Caprolactam blocked NCO-groups, it is stable during processing up to the unblocking t...view more VESTAGON® B 1400 is a crosslinking agent for polyurethane powder coatings. It is a polyisocyanate adduct used in combination with hydroxy functional resins. Due to the ε-Caprolactam blocked NCO-groups, it is stable during processing up to the unblocking temperature of more than 160°C. The crosslinker is delivered in the form of pellets. These polyols have a determining influence on the performance of the coating. PUR powder coatings have been successfully used in both exterior and interior applications such as: motor vehicle parts; fittings; bicycle frames; fork lift trucks; exterior furniture and lawn equipment; agricultural machinery; appliances; and telephone booths. view less | Request Sample |
| Fast Red BBC | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red BBC is a red pigment that has excellent dispersibility and good migration resistance. This product has a density of 1.45 g/cm3 and a pH value of 7.0-8.0, and it is commonly used in powder coatings. | |
| CRYLCOAT® 2845-0 | Allnex | CRYLCOAT® 2845-0 is a hydroxyl functional polyester resin with for use with blocked polyisocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2845-0 require less blocked polyisocyanate without affecting the good overal...view more CRYLCOAT® 2845-0 is a hydroxyl functional polyester resin with for use with blocked polyisocyanates or uretdiones in the production of powder coatings. Systems based on CRYLCOAT® 2845-0 require less blocked polyisocyanate without affecting the good overall properties. view less | Request Sample |
| CRYLCOAT® 2432-0 | Allnex | CRYLCOAT® 2432-0 is a carboxylated polyester resin for use with TGIC in a 96/4 ratio for the production of powder coatings.Coatings based on CRYLCOAT® 2432-0 can be dry-blended with CRYLCOAT® 2414-0 based powders to give matte coatings that exhibit good s...view more CRYLCOAT® 2432-0 is a carboxylated polyester resin for use with TGIC in a 96/4 ratio for the production of powder coatings.Coatings based on CRYLCOAT® 2432-0 can be dry-blended with CRYLCOAT® 2414-0 based powders to give matte coatings that exhibit good smoothness and good outdoor durability. view less | Request Sample |
| HDK® N20D | Wacker Chemical Corporation | HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such...view more HDK® N20D is a white colloidal powder of high purity and is synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in many organic systems. HDK® N20D is applied in many applications such as adhesives, adsorption agents, decorative cosmetics, inkjet, coatings and wind power. view less | Request Sample |
| CRYLCOAT® 1540-0 | Allnex | CRYLCOAT® 1540-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1540-0 exhibit excellent flow, high gloss, and excellent wetting of fillers and pigments. | Request Sample |
| Epotec® TH 983 | Aditya Birla | Epotec® TH 983 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator and flow modifier. This product is ideal for use in both decorative and protective powder coatings. | |
| CRYLCOAT® 1544-0 | Allnex | CRYLCOAT® 1544-0 is a low reactive carboxyl functional polyester resin for use in the manufacture of 50/50 or 60/40 hybrid powder coatings. CRYLCOAT® 1544-0 is compatible with other carboxyl functional polyester resins and can be blended in all ratios to ...view more CRYLCOAT® 1544-0 is a low reactive carboxyl functional polyester resin for use in the manufacture of 50/50 or 60/40 hybrid powder coatings. CRYLCOAT® 1544-0 is compatible with other carboxyl functional polyester resins and can be blended in all ratios to provide intermediate reactivity. view less | Request Sample |
| Pigment Yellow 194 (Corimax Yellow F2G) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Yellow 194 (Corimax Yellow F2G) is a medium shade benzimidazolone yellow pigment with heat and light fastness. It is recommended for automotive, decorative, general industrial, and powder coatings, as well as for various plastic applications. | |
| Isocryl® H-1871 | Estron Chemical, Inc. | Isocryl® H-1871 is a solid, hydroxyl-functional acrylic resin specifically designed for one-shot, low to mid-gloss, exterior durable polyurethane powder coatings. Isocryl® H-1871 is used in conjunction with conventional or super-durable hydroxyl polyester...view more Isocryl® H-1871 is a solid, hydroxyl-functional acrylic resin specifically designed for one-shot, low to mid-gloss, exterior durable polyurethane powder coatings. Isocryl® H-1871 is used in conjunction with conventional or super-durable hydroxyl polyesters to be cured with blocked isocyanate or uretdione hardeners. view less | |
| Primid® SF-4510 | EMS-CHEMIE AG (PRIMID) | Primid® SF-4510 is a hydroxyalkylamide crosslinker formulated for protective finishes on metal surfaces. This product is well suited for use in high gloss powder coatings as well as applications were good outgassing properties are required. | |
| Cinilex® DPP Red SR2P | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...view more Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. view less | |
| Pigment Green 7 (Corimax Green GF311) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Green 7 (Corimax Green GF311) is a phthalocyanine green pigment with high strength. It is recommended for decorative, coil, general industrial, and powder coatings, textile printing, and offset, water-based, solvent-based, and UV inks. | |
| Pigment Red 188 (Corimax Red HF3S) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Red 188 (Corimax Red HF3S) is a semi-transparent monoazo red pigment. It is recommended for decorative, general industrial, and powder coatings, textile printing, and for offset inks, water-based inks, and solvent-based inks. | |
| Pigment Yellow 13 (Corimax Yellow GR-02) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Yellow 13 (Corimax Yellow GR-02) is a disazo yellow pigment with good heat and light fastness. It is recommended for powder coatings, textile printing, offset inks, water-based inks, and for various plastic applications. | |
| HNDA | BASF Corporation, Chemical Intermediates | HNDA (2,6-naphthalene dicarboxylic acid) is a key co-monomer for the production of polyester powder coatings as a bisphenol A replacement. As a component in film coatings, HNDA increases heat deflection temperature, lowers gas permeability, and improves ...view more HNDA (2,6-naphthalene dicarboxylic acid) is a key co-monomer for the production of polyester powder coatings as a bisphenol A replacement. As a component in film coatings, HNDA increases heat deflection temperature, lowers gas permeability, and improves UV resistance. view less | |
| BLS® 119 | Mayzo, Inc. | BLS® 119 is a high molecular weight hindered amine light stabilizer (HALS) and stabilizer. It has low-volatility during high temperature processing and excellent resistance to migration and extraction. BLS® 119 is used in powder coatings. | |
| Epoxy Hardener G-92 | Estron Chemical, Inc. | Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings a...view more Epoxy Hardener G-92 is a phenolic curing agent for use with epoxy and epoxy novolac-based powder coatings. Coatings made with Epoxy Hardener G-92 exhibit the excellent chemical resistance and mechanical properties for which phenolic-cured epoxy coatings are noted. view less | |
| HEUCOSIN® Brown G 3489 | Heubach Ltd | HEUCOSIN® Brown G 3489 is a lead chromate free pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. This p...view more HEUCOSIN® Brown G 3489 is a lead chromate free pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. This product has a specific gravity of 4.7g/cm^3, a bulk volume of 1.7 I/kg, and an oil absorption of 25 g/100g. view less | Request Sample |
| Titanium Dioxide SR-237 | Shandong Doguide | Titanium Dioxide SR-237 is an organic or inorganic surface treated multipurpose rutile titanium dioxide pigment with high gloss and tinting strength, good whiteness, and high durability. This product is applicable in emulsion paints, water-based coatings,...view more Titanium Dioxide SR-237 is an organic or inorganic surface treated multipurpose rutile titanium dioxide pigment with high gloss and tinting strength, good whiteness, and high durability. This product is applicable in emulsion paints, water-based coatings, and powder coatings. view less | |
| HEUCOSIN® Fast Blue G 1737 | Heubach Ltd | HEUCOSIN® Fast Blue G 1737 is a lead chromate free pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. Th...view more HEUCOSIN® Fast Blue G 1737 is a lead chromate free pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. This product has a specific gravity of 3.8 g/cm^3, a bulk volume of 1.7 I/kg, and an oil absorption of 24 g/100g. view less | Request Sample |
| HEUCOSIN® Fast Blue G 14555 | Heubach Ltd | HEUCOSIN® Fast Blue G 14555 is a lead chromate free pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. T...view more HEUCOSIN® Fast Blue G 14555 is a lead chromate free pigment preparation of inorganic and/or organic pigments with extenders. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. This product has a specific gravity of 4.0g/cm^3, a bulk volume of 1.8 I/kg, and an oil absorption of 13 g/100g. view less | Request Sample |
| HDK® H15 | Wacker Chemical Corporation | HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the ...view more HDK® H15 is a white colloidal powder of high purity. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 is synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis and acts as a free flow additive in the production of technical powders. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. view less | Request Sample |
| UVECOAT® 3003 | Allnex | UVECOAT® 3003 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications on PVC flooring. Coatings based on UVECOAT® 3003 combines excellent scratch and chemical resistance with...view more UVECOAT® 3003 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications on PVC flooring. Coatings based on UVECOAT® 3003 combines excellent scratch and chemical resistance with good flexibility. view less | Request Sample |
| CRYLCOAT® 1783-0 | Allnex | CRYLCOAT®1783-0 is a low reactive, carboxylated polyester resin for use with epoxy resins in the production of 70/30 hybrid powder coatings. Formulations based on CRYLCOAT® 1783-0 exhibit very good gloss and flow and can be blended in any ratio with CRYLC...view more CRYLCOAT®1783-0 is a low reactive, carboxylated polyester resin for use with epoxy resins in the production of 70/30 hybrid powder coatings. Formulations based on CRYLCOAT® 1783-0 exhibit very good gloss and flow and can be blended in any ratio with CRYLCOAT® 1770-0 to control reactivity. view less | Request Sample |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...view more ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. view less | |
| Isocryl® EP-560 | Estron Chemical, Inc. | Isocryl® EP-560 is a novel glycidyl functional acrylic resin used for the gloss modification of exterior durable polyester powder coatings. As with its predecessor, Isocryl® EP-550, “one shot”, matte, TGICfree, weatherable finishes can be produced with Is...view more Isocryl® EP-560 is a novel glycidyl functional acrylic resin used for the gloss modification of exterior durable polyester powder coatings. As with its predecessor, Isocryl® EP-550, “one shot”, matte, TGICfree, weatherable finishes can be produced with Isocryl® EP-560 in conjunction with acid functional linear polyesters. view less | |
| CRYLCOAT® 2499-6 | Allnex | CRYLCOAT® 2499-6 is a carboxyl functional polyester resin for use in low bake (10 min x 160°C) TGIC powder coatings. Coatings based on this product exhibit good flow, excellent gloss, mechanical properties with improved storage stability and blooming resi...view more CRYLCOAT® 2499-6 is a carboxyl functional polyester resin for use in low bake (10 min x 160°C) TGIC powder coatings. Coatings based on this product exhibit good flow, excellent gloss, mechanical properties with improved storage stability and blooming resistance. view less | Request Sample |
| S-394-MG (Synthetic Wax) | Shamrock Technologies, Inc. | S-394-MG is a synthetic wax with a DSC melt peak above 110°C. S-394-MG is recommended for use in many types of coating systems including solvent-based, water-based, UV, and powder coatings. | |
| HDK® T30 | Wacker Chemical Corporation | HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, pr...view more HDK® T30 is a synthetic, hydrophilic amorphous silica, produced via flame hydrolysis that is a white colloidal powder of high purity. It is applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others. HDK® T30 is used as a reinforcing filler in elastomers, mainly silicone-elastomers. view less | Request Sample |
| JONCRYL® 682 | BASF Dispersions & Resins | JONCRYL 682 is a very low molecular weight acrylic resin that allows for the formulation of high solids coatings with high gloss and excellent holdout. This product is recommended for interior/exterior general metal powder coating applications. | |
| CRYLCOAT® 1750-1 | Allnex | CRYLCOAT® 1750-1 is a highly reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 at a 70/30 ratio. Powder coatings produced from CRYLCOAT® 1750-1 are tribo applicable and show no blooming effect when heated for a long time a...view more CRYLCOAT® 1750-1 is a highly reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 at a 70/30 ratio. Powder coatings produced from CRYLCOAT® 1750-1 are tribo applicable and show no blooming effect when heated for a long time at temperatures up to 120°C. view less | Request Sample |
| Resiflow® PL-220 | Estron Chemical, Inc. | Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple ...view more Resiflow® PL-220 is a flow control agent for powder coatings that imparts unique compatibilizing and anti-cratering robustness properties to powder coating formulations while affording exceptionally smooth films. Resiflow® PL-220 is suitable for multiple binder chemistries including polyesters, polyurethanes, hybrids, epoxies, and acrylics. view less | |
| TIB KAT® 220 | TIB Chemicals | TIB KAT® 220 is a liquid catalyst that is used in the production of plasticizers, saturated and unsaturated polyesters and in the curing of polyurethane based powder coatings. This product has a tin content of 18.8-20.6%. | |
| CRYLCOAT® 1506-0 | Allnex | CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flo...view more CRYLCOAT® 1506-0 is a highly reactive carboxylated polyester resin for use in the production of 50/50 hybrid powder coatings. Formulations based on CRYLCOAT® 1506-0 exhibit good overbake and solvent resistance, good mechanical properties and very good flow. view less | Request Sample |
| HEUCOSIN® Fast Blue G 3012P | Heubach Ltd | HEUCOSIN® Fast Blue G 3012P is a lead chromate free blue powder pigment preparation of organic and/or inorganic pigments and extenders. It is recommended for general industrial coatings, specifically for general industrial coatings, specifically powder co...view more HEUCOSIN® Fast Blue G 3012P is a lead chromate free blue powder pigment preparation of organic and/or inorganic pigments and extenders. It is recommended for general industrial coatings, specifically for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. This product has a specific gravity of 3.0 g/cm^3, a bulk volume of 2.5 I/kg, and an oil absorption of 19 g/100g. view less | Request Sample |
| ADDITOL® P 791 | Allnex | ADDITOL® P 791 is a solid aliphatic polyanhydride hardener for use with solid acrylic resins containing glycidyl groups to manufacture powder coatings. The binder ratio is dependent on the equivalent weight of the glycidyl functional resin employed. | Request Sample |
| CRYLCOAT® E 04811 | Allnex | CRYLCOAT®E 04811 is a medium reactive carboxyl functional polyester resin with rPET as one of the major raw materials for use in the production of 70/30 hybrid powder coatings with excellent storage stability and general properties. | Request Sample |
| CRYLCOAT® 1630-0 | Allnex | Crylcoat® 1630-0 is a low reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in ratios from 50/50 to 60/40 to manufacture hybrid powder coatings. Formulations containing Crylcoat® 1630-0 exhibit good storage stability. | Request Sample |
| Luna-mer B-55 | DKSH | Luna-mer B-55 is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid powder coatings, which provides consistent gloss when cured at 180°C minimum. This product is available in Europe, Asia and North America. | Request Sample |
| Luna-mer B-68 | DKSH | Luna-mer B-68 is a crosslinkable matting agent for epoxy and epoxy/polyester hybrid powder coatings, which provides consistent gloss when cured at 180°C minimum. This product is available in Europe, Asia and North America. | Request Sample |
| Pigment Red 202 (Corimax Red 202) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Red 202 (Corimax Red 202) is a semi-transparent, bluish quinacridone red pigment. It is recommended for automotive, general industrial, and powder coatings, and for offset inks, water-based inks, solvent-based inks, and UV inks. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| Benzoin | Estron Chemical, Inc. | Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the ...view more Benzoin is a well established and reliable degassing agent for powder coatings. During the curing of a powder coating film, Benzoin melts and chemically scavenges oxygen and promotes dissolution of gases into the resin to minimize bubble formation in the coating film. view less | |
| CRYLCOAT® 2693-6 | Allnex | CRYLCOAT® 2693-6 is a low bake tribo active Primid® polyester resin for matte dry blend systems in a ratio of 93/7. In combination with CRYLCOAT® 2668-6 powder coatings with 60° gloss between 25 and 30 gloss units can be formulated. Full cure can be achie...view more CRYLCOAT® 2693-6 is a low bake tribo active Primid® polyester resin for matte dry blend systems in a ratio of 93/7. In combination with CRYLCOAT® 2668-6 powder coatings with 60° gloss between 25 and 30 gloss units can be formulated. Full cure can be achieved at 12 min x 160°C schedule. view less | Request Sample |
| Verdcol® BML Yellow 151 GH | Verdcol Ltd | Verdcol® BML Yellow 151 GH is a green shade yellow pigment with good color strength and opacity. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3, and is recommended as a replacement for diarylide yellow and lead chromate. It can also be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings...view more Verdcol® BML Yellow 151 GH is a green shade yellow pigment with good color strength and opacity. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3, and is recommended as a replacement for diarylide yellow and lead chromate. It can also be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, coil coatings, and wood coatings. view less | |
| CHS-Epoxy 112 4F0,5 | Spolchemie | CHS-Epoxy 112 4F0,5 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and it’s epoxide equivalent weight (EEW) range is between 900-950 g/mol. This product is a mixture compromising 99.5% CHS-Epoxy 112 and .5% of a flow control agent. CHS-Epoxy 1124F0.5 is primarily used for producing epoxy powder coatings...view more CHS-Epoxy 112 4F0,5 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and it’s epoxide equivalent weight (EEW) range is between 900-950 g/mol. This product is a mixture compromising 99.5% CHS-Epoxy 112 and .5% of a flow control agent. CHS-Epoxy 1124F0.5 is primarily used for producing epoxy powder coatings. view less | |
| CRYLCOAT® 2618-3 | Allnex | CRYLCOAT® 2618-3 is a high performance, tribo-active carboxylated polyester resin for use with Primid® XL-552 to produce powder coatings. Formulations based on CRYLCOAT® 2618-3 exhibit good flow and mechanical properties, very good overbake resistance, an...view more CRYLCOAT® 2618-3 is a high performance, tribo-active carboxylated polyester resin for use with Primid® XL-552 to produce powder coatings. Formulations based on CRYLCOAT® 2618-3 exhibit good flow and mechanical properties, very good overbake resistance, and good gas resistance. These formulations provide a level of outdoor weathering resistance that meets GSB and Qualicoat standards. view less | Request Sample |
| Methyl Ethyl Ketoxime | Prakash Chemical Intl. Pvt. Ltd. | Methyl Ethyl Ketoxime is an essential chemical used as an anti-skinning agent in paints and lacquers. This product can be used as an urethane blocking agent for coating applications which include powder coatings, automotive coatings, and coatings on plast...view more Methyl Ethyl Ketoxime is an essential chemical used as an anti-skinning agent in paints and lacquers. This product can be used as an urethane blocking agent for coating applications which include powder coatings, automotive coatings, and coatings on plastic, textiles and general industrial metal. view less | |
| BENDA-LUTZ® 7624 | Benda-Lutz | BENDA-LUTZ® 7624 is an aluminum powder developed for stability in waterborne coating applications. It is resistant to chemicals in harsh environments and has an average particle size of 37. It is suitable for waterbased paints/printing inks and powder coa...view more BENDA-LUTZ® 7624 is an aluminum powder developed for stability in waterborne coating applications. It is resistant to chemicals in harsh environments and has an average particle size of 37. It is suitable for waterbased paints/printing inks and powder coatings as well as decorative interior coatings. view less | |
| BENDA-LUTZ® 7656 | Benda-Lutz | BENDA-LUTZ® 7656 is an aluminum powder developed for stability in waterborne coating applications. It is resistant to chemicals in harsh environments and has an average particle size of 15. It is suitable for waterbased paints/printing inks and powder coa...view more BENDA-LUTZ® 7656 is an aluminum powder developed for stability in waterborne coating applications. It is resistant to chemicals in harsh environments and has an average particle size of 15. It is suitable for waterbased paints/printing inks and powder coatings as well as decorative interior coatings. view less | |
| CRYLCOAT® 1557-5 | Allnex | CRYLCOAT® 1557-5 is a carboxyl functional polyester resin for use with epoxy resins in ratios from 50/50 to 60/40 to manufacturehybrid powder coatings. Formulations based on CRYLCOAT® 1557-5 exhibit high reactivity, scratch resistance and good overall pro...view more CRYLCOAT® 1557-5 is a carboxyl functional polyester resin for use with epoxy resins in ratios from 50/50 to 60/40 to manufacturehybrid powder coatings. Formulations based on CRYLCOAT® 1557-5 exhibit high reactivity, scratch resistance and good overall properties. CRYLCOAT® 1557-5 can be blended in all ratios with CRYLCOAT® 1544-4 to provide intermediate reactivity. view less | Request Sample |
| Gap 880 | Metapol | Gap 880, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, aerosols, and powder coatings. This product's average particle diameter ranges...view more Gap 880, in the form of a particle-sized flake, is a non-leafing aluminum pigment in an aliphatic solvent paste that can be used in industrial coatings, hammerfinish coatings, aerosols, and powder coatings. This product's average particle diameter ranges between 7.8-9.5 um. view less | |
| CRYLCOAT® 2611-0 | Allnex | CRYLCOAT® 2611-0 is a Primid® polyester resin designed for matte one-shot systems to produce in combination with CRYLCOAT® 2687-2 powder coatings with 60° gloss between 5 and 10%. The coatings show very good mechanical properties, flow, and outdoor resist...view more CRYLCOAT® 2611-0 is a Primid® polyester resin designed for matte one-shot systems to produce in combination with CRYLCOAT® 2687-2 powder coatings with 60° gloss between 5 and 10%. The coatings show very good mechanical properties, flow, and outdoor resistance. view less | Request Sample |
| HEUCOSIN® Fast Orange G 7626 | Heubach Ltd | HEUCOSIN® Fast Orange G 7626 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free orange powder, with a bulk volume of 2.5 I/kg, a specific gravity of 3.0 g/cm^3, an oil absorption of 20 g/100g, and...view more HEUCOSIN® Fast Orange G 7626 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free orange powder, with a bulk volume of 2.5 I/kg, a specific gravity of 3.0 g/cm^3, an oil absorption of 20 g/100g, and a moisture content of 1.0%. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| HEUCOSIN® Fast Green G 6862 | Heubach Ltd | HEUCOSIN® Fast Green G 6862 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 4.1 g/cm^3, a bulk volume of 1.4 I/kg, an oil absorption of 14 g/100g, and a...view more HEUCOSIN® Fast Green G 6862 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 4.1 g/cm^3, a bulk volume of 1.4 I/kg, an oil absorption of 14 g/100g, and a moisture content of 1.0%. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| HEUCOSIN® Fast Green G 6865 | Heubach Ltd | HEUCOSIN® Fast Green G 6865 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 3.8 g/cm^3, a bulk volume of 1.7 I/kg, an oil absorption of 17 g/100g, and a...view more HEUCOSIN® Fast Green G 6865 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a specific gravity of 3.8 g/cm^3, a bulk volume of 1.7 I/kg, an oil absorption of 17 g/100g, and a moisture content of 1.0%. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| HEUCOSIN® Fast Green G 7671 | Heubach Ltd | HEUCOSIN® Fast Green G 7671 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a bulk volume of 1.7 I/kg, a specific gravity of 3.6 g/cm^3, an oil absorption of 22 g/100g, and a...view more HEUCOSIN® Fast Green G 7671 is a pigment preparation of inorganic and/or organic pigments with extenders. It is a dry, lead chromate free green powder, with a bulk volume of 1.7 I/kg, a specific gravity of 3.6 g/cm^3, an oil absorption of 22 g/100g, and a moisture content of 1.0%. It is recommended for general industrial coatings, specifically powder coatings, waterborne coatings and solvent based coatings. view less | Request Sample |
| CHS-Epoxy 112 4F5 | Spolchemie | CHS-Epoxy 112 4F5 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and it’s epoxide equivalent weight (EEW) range is between 910-1110 g/mol. This product is a mixture compromising 95% CHS-Epoxy 112 and 5% of a flow control agent. CHS-Epoxy 112 4F5 is primarily used for producing epoxy powder coatings...view more CHS-Epoxy 112 4F5 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and it’s epoxide equivalent weight (EEW) range is between 910-1110 g/mol. This product is a mixture compromising 95% CHS-Epoxy 112 and 5% of a flow control agent. CHS-Epoxy 112 4F5 is primarily used for producing epoxy powder coatings. view less | |
| Pigment Red 245 (Corimax Red 245) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Red 245 (Corimax Red 245) is a bluish monoazo red pigment. It is recommended for automotive, decorative, coil, general industrial, and powder coatings, as well as for solvent-based inks, UV inks, and for several plastic applications. | |
| PIGMENT GREEN 7 | Shanghai Honor Industrial Co., LTD | PIGMENT GREEN 7, C.I.NO.PG7 is a phthalo green pigment, with a bluish shade. It is mainly used in industrial paints, construction paints and powder coatings, printing inks and plastics. This product has excellent fastness and good heat stability. | |
| 1073 DPP Orange 73 | Lansco Colors | 1073 DPP Orange 73 is a medium shade opaque orange pigment with very good light and chemical resistance. This product is used in the coatings industry for high quality and general industrial applications including automotive finishes, in powder coatings a...view more 1073 DPP Orange 73 is a medium shade opaque orange pigment with very good light and chemical resistance. This product is used in the coatings industry for high quality and general industrial applications including automotive finishes, in powder coatings and printing inks. view less | |
| Isocryl® EP-555 | Estron Chemical, Inc. | Isocryl® EP-555 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® ...view more Isocryl® EP-555 is a glycidyl functional acrylic resin that is designed for clear powder coating applications that demand superior clarity, smoothness, UV durability, intercoat adhesion and compatibility with other powder coating binder systems. Isocryl® EP-555, with a Tg of 53°C, has the smoothest appearance of comparable resins, notably at low bake temperatures. It is recommended where distinctness of image is the critical aesthetic criterion. view less | |
| 1334 Opaque Orange 34 | Lansco Colors | 1334 Opaque Orange 34 is a bright strong diarylide orange color with a modified particle size to gain high opacity, improved lightfastness and flow properties. This product is used in industrial paints, powder coatings, and UV printing inks. | |
| RC 833 | CINKARNA | RC 833 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and zirconium compounds. It can be used in dispersion paints, industrial and decorative coatings, powder coa...view more RC 833 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface-treated with aluminum and zirconium compounds. It can be used in dispersion paints, industrial and decorative coatings, powder coatings, plaster paints, and printing inks. view less | |
| CHS-Epoxy 130 4F10 | Spolchemie | CHS-Epoxy 130 4F10 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and its epoxide equivalent weight (EEW) range is between 770-910 g/mol. This product is a mixture compromising 90% CHS-Epoxy 130 and 10% of a flow control agent. CHS-Epoxy 130 4F10 is primarily used for producing epoxy powder coatings...view more CHS-Epoxy 130 4F10 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and its epoxide equivalent weight (EEW) range is between 770-910 g/mol. This product is a mixture compromising 90% CHS-Epoxy 130 and 10% of a flow control agent. CHS-Epoxy 130 4F10 is primarily used for producing epoxy powder coatings. view less | |
| CHS-Epoxy 141 4F5 | Spolchemie | CHS-Epoxy 141 4F5 is a modified solid epoxy resin. This epoxy resin has a low molecular weight, and its epoxide equivalent weight (EEW) range is between 690-770 g/mol. This product is a mixture compromising 95% CHS-Epoxy 141 and 5% of a flow control agent. CHS-Epoxy 141 4F5 is primarily used for producing epoxy powder coatings...view more CHS-Epoxy 141 4F5 is a modified solid epoxy resin. This epoxy resin has a low molecular weight, and its epoxide equivalent weight (EEW) range is between 690-770 g/mol. This product is a mixture compromising 95% CHS-Epoxy 141 and 5% of a flow control agent. CHS-Epoxy 141 4F5 is primarily used for producing epoxy powder coatings. view less | |
| CHS-Epoxy 160 4F2.5 | Spolchemie | CHS-Epoxy 160 4F2.5 is a modified solid epoxy resin. This epoxy resin has a low molecular weight, and its epoxide equivalent weight (EEW) range is between 590-670 g/mol. This product is a mixture compromising 97.5% CHS-Epoxy 160 and 2.5% of a flow control agent. CHS-Epoxy 160 4F2.5 is primarily used for producing epoxy powder coatings...view more CHS-Epoxy 160 4F2.5 is a modified solid epoxy resin. This epoxy resin has a low molecular weight, and its epoxide equivalent weight (EEW) range is between 590-670 g/mol. This product is a mixture compromising 97.5% CHS-Epoxy 160 and 2.5% of a flow control agent. CHS-Epoxy 160 4F2.5 is primarily used for producing epoxy powder coatings. view less | |
| Isocryl® EP-560G | Estron Chemical, Inc. | Isocryl® EP-560G is the ground version of Isocryl® EP-560 resin flakes. Isocryl® EP-560G is a novel glycidyl functional acrylic resin used for the gloss modification of exterior durable polyester powder coatings. As with its predecessor, Isocryl® EP-550, ...view more Isocryl® EP-560G is the ground version of Isocryl® EP-560 resin flakes. Isocryl® EP-560G is a novel glycidyl functional acrylic resin used for the gloss modification of exterior durable polyester powder coatings. As with its predecessor, Isocryl® EP-550, “one shot”, matte, TGIC-free, weatherable finishes can be produced with Isocryl® EP-560G in conjunction with acid functional linear polyesters. view less |
