| Activox® R50 | Huntsman Pigments & Additives | Activox® R50 is a bright white powder manufactured by a process which permits close control of physical and chemical properties. As a consequence, impurity levels are low and product quality is consistent from batch to batch. In addition, the content of water soluble salts...view more Activox® R50 is a bright white powder manufactured by a process which permits close control of physical and chemical properties. As a consequence, impurity levels are low and product quality is consistent from batch to batch. In addition, the content of water soluble salts is low, an important consideration in certain applications. This product's surface area is 50 meter squared per gram. view less | |
| Activox® R80 | Huntsman Pigments & Additives | Activox® R80 is a bright white powder manufactured by a process which permits close control of physical and chemical properties. As a consequence, impurity levels are low and product quality is consistent from batch to batch. In addition, the content of water soluble salts...view more Activox® R80 is a bright white powder manufactured by a process which permits close control of physical and chemical properties. As a consequence, impurity levels are low and product quality is consistent from batch to batch. In addition, the content of water soluble salts is low, an important consideration in certain applications. The surface area of this product is 80 meters squared per gram. view less | |
| Barium Chromate M20 | SNCZ Société Nouvelle des Couleurs Zinciques | Barium Chromate M20 (BaCrO4) is a low-dust yellow micronised powder that contains no soluble salts which might have a detrimental effect on the anticorrosive performance. Because of its structure and colour, M20 has a slight tinting strength that is no...view more Barium Chromate M20 (BaCrO4) is a low-dust yellow micronised powder that contains no soluble salts which might have a detrimental effect on the anticorrosive performance. Because of its structure and colour, M20 has a slight tinting strength that is not hygroscopic. It is easily dispersible and has a low oil absorption. This product's lightfastness is excellent and it is perfectly stable up to 600°C. Barium Chromate M20 passivates metals by building up a surface bonded protective metal oxide layer (anodic passivation). It has a wide spectrum of efficiency in terms of metal protection. view less | Request Sample |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...view more Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. view less | |
| ADDAPT® Ferrocor™ Flash | ADDAPT Chemicals BV | ADDAPT® Ferrocor™ Flash is a proprietary blend of phosphate salts and phosphonoxy esters. It is used as a corrosion inhibitor for ferrous and zinc surfaces. This product is water soluble and can be added to emulsion paints, lacquers, and textile fluids. | |
| ADDAPT® Anticor™ A65N | ADDAPT Chemicals BV | ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pi...view more ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pitting on the metal surface, is biodegradable, and is not restricted by the hardness of the water. view less | |
| ADDAPT® Anticor™ A84 | ADDAPT Chemicals BV | ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restr...view more ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restricted by the hardness of the water. It is used in coatings, printing inks, lubricants, textile fluids, and cleaners. view less | |
| Troycat™ Lithium 2 | Arxada – Troy Corporation | Troycat™ Lithium 2 is an oil/glycol soluble salt of lithium, containing 2% by weight of lithium. | Request Sample |
| WorléeAdd 422 | Worlée-Chemie G.m.b.H. | WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is soluble in water, alcohols and ketones. It is partially soluble...view more WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is soluble in water, alcohols and ketones. It is partially soluble in aliphatic and aromatic hydrocarbons and esters. view less | |
| Betacel® H 30 D | Grupo Petroquimico Beta SA de CV | Betacel® H 30 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is...view more Betacel® H 30 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is that it is a very excellent rheology modifier generating shear thinning solutions, it acts as a protective colloid and stabilizer, it has and excellent property of water-retension as well as good compatibility with surfactants, inorganic salts, rubbers and resins. This product has a viscosity of 1,500-2,500 cps. at 25C and is for use in construction and paint products. view less | |
| Betacel® H 50 D | Grupo Petroquimico Beta SA de CV | Betacel® H 50 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is...view more Betacel® H 50 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is that it is a very excellent rheology modifier generating shear thinning solutions, it acts as a protective colloid and stabilizer, it has and excellent property of water-retension as well as good compatibility with surfactants, inorganic salts, rubbers and resins. This product has a viscosity of 2,600-3,300 cps. at 25C and is for use in personal care, home care and paint products. view less | |
| AQUPEC MG N40R | Sumitomo Seika America, Inc. | AQUPEC MG N40R is a water-soluble cross-linked acrylic polymer that is already neutralized and does not require neutralization in the customer's process. Since AQUPEC MG N40R is a spherical polymer, unique rheology control is possible. The product is main...view more AQUPEC MG N40R is a water-soluble cross-linked acrylic polymer that is already neutralized and does not require neutralization in the customer's process. Since AQUPEC MG N40R is a spherical polymer, unique rheology control is possible. The product is mainly used for personal care and has been adopted because it can produce a unique texture. view less | |
| Betacel® H 100 D | Grupo Petroquimico Beta SA de CV | Betacel® H 100 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H i...view more Betacel® H 100 D is hydroxyethylcellulose a non-ionic cellulose derivative, soluble in either hot or cold water, which is widely used to modify the viscosity of solutions, dispersions and emulsions. Among the most important characteristics of Betacel® H is that it is a very excellent rheology modifier generating shear thinning solutions, it acts as a protective colloid and stabilizer, it has and excellent property of water-retension as well as good compatibility with surfactants, inorganic salts, rubbers and resins. This product has a viscosity of 3,400-5,000 cps. at 25C and is for use in personal care, home care and paint and oilfield products. view less | |
| K-PURE® CXC-1615 | King Industries, Inc. | K-PURE® CXC-1615 is an amine salt of trifluoromethanesulfonic acid that is suggested to be used in thermal initiated cationic polymerization of cycloaliphatic epoxies, epoxy esters and epoxy ether resins. It also functions as a stimulant for condensation reactions with amino resins and benzoxazine resins. It appears as an amber liquid and is 60% active. This product is soluble in alcohols, water, glycols, glycol ethers, ketones, and carbonates. It is not soluble...view more K-PURE® CXC-1615 is an amine salt of trifluoromethanesulfonic acid that is suggested to be used in thermal initiated cationic polymerization of cycloaliphatic epoxies, epoxy esters and epoxy ether resins. It also functions as a stimulant for condensation reactions with amino resins and benzoxazine resins. It appears as an amber liquid and is 60% active. This product is soluble in alcohols, water, glycols, glycol ethers, ketones, and carbonates. It is not soluble in aliphatic and aromatic hydrocarbons. view less | |
| Bronze Red C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Bronze Red C is a barium salt of azo lake and yellowish red pigment that features high tinting strength, good heat resistance, and good migration fastness. This product has a water soluble matter of 2.0 and it is commonly used in ink applications. | |
| Calamine BP | Huntsman Pigments & Additives | Calamine BP is a pink odorless powder, consisting of Basic Zinc Carbonate tinted with a small amount of red iron oxide pigment. It is manufactured without a solution step, and therefore has no by-product salt contamination. This product is insoluble in w...view more Calamine BP is a pink odorless powder, consisting of Basic Zinc Carbonate tinted with a small amount of red iron oxide pigment. It is manufactured without a solution step, and therefore has no by-product salt contamination. This product is insoluble in water but soluble in dilute acids. view less | |
| Zinc Carbonate Standard | Huntsman Pigments & Additives | Zinc Carbonate Standard is a fine white powder having the approximate composition 2ZnCO3.3ZN(OH)2. It is a hydrated basic product manufactured without a solution step, so there is no by-product salt contamination. This product has a particularly high purity and is insoluble in water, but soluble...view more Zinc Carbonate Standard is a fine white powder having the approximate composition 2ZnCO3.3ZN(OH)2. It is a hydrated basic product manufactured without a solution step, so there is no by-product salt contamination. This product has a particularly high purity and is insoluble in water, but soluble in dilute acids. view less | |
| NACURE® 3525 | King Industries, Inc. | NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, especially in high solids polyester and alkyd formulations. It offers good ahesion, salt spray and water resistance, and no wrinkling. It is soluble...view more NACURE® 3525 appears as a clear transparent amber liquid. It is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) stimulant that uses a slower releasing amine for higher bake temperatures. NACURE® 3525 is formed for increased solubility, especially in high solids polyester and alkyd formulations. It offers good ahesion, salt spray and water resistance, and no wrinkling. It is soluble in water, alcohol, glycol ethers, ketones, and glycols. It is usually applied in metal decorating, automotive topcoats, coil coatings, can coatings, appliance finishes, general industrials, and electrostatic spray. view less | |
| NACURE® X49-110 | King Industries, Inc. | NACURE® X49-110 is an amine neutralized Dinonylnaphthalenesulfonic acid (DNNDSA) stimulant that gives a combination of package stability and cure response. This product offer good adhesion, and resistance to salt spray and humidity. It is soluble in alcoh...view more NACURE® X49-110 is an amine neutralized Dinonylnaphthalenesulfonic acid (DNNDSA) stimulant that gives a combination of package stability and cure response. This product offer good adhesion, and resistance to salt spray and humidity. It is soluble in alcohol, water, glycols, and glycol ethers. It can be applied to automotive primers, general industrials, water based can and coil coatings, electrostatic spray coatings, and electrocoat. view less | |
| HYDROPALAT® WE 3475 | BASF Formulation Additives | HYDROPALAT® WE 3475 is a highly efficient wetting agent, di-2-ethylhexyl sulphosuccinate, sodium salt. It is a very good wetting agent with only a medium tendency of foam formation in aqueous solutions or in polymer dispersions. The relatively low critical micelle concentration of approximately 1 g active substance/l and the strong reduction in surface tension of aqueous solutions, even when using low concentrations, make HYDROPALAT® WE 3475 an ideal surface active agent. This product is just slightly water-soluble...view more HYDROPALAT® WE 3475 is a highly efficient wetting agent, di-2-ethylhexyl sulphosuccinate, sodium salt. It is a very good wetting agent with only a medium tendency of foam formation in aqueous solutions or in polymer dispersions. The relatively low critical micelle concentration of approximately 1 g active substance/l and the strong reduction in surface tension of aqueous solutions, even when using low concentrations, make HYDROPALAT® WE 3475 an ideal surface active agent. This product is just slightly water-soluble. The water solubility may be increased by the addition of a small amount of a solubilizer allowing solubility of up to 80 % to be achieved. Diluting HYDROPALAT® WE 3475 with water is possible up to a certain extent, but liquid-crystalline gel type phases may occur in the region of approximately 50 % active substance. view less | |
| NACURE® XC-311 | King Industries, Inc. | NACURE® XC-311 appears as a clear and transparent light amber liquid. It is a novel latent acid stimulant that is made to reduce the cure temperature of amino crosslinked systems. This product offers good salt spray, humidity, QUV, and overbake resistance. It is soluble...view more NACURE® XC-311 appears as a clear and transparent light amber liquid. It is a novel latent acid stimulant that is made to reduce the cure temperature of amino crosslinked systems. This product offers good salt spray, humidity, QUV, and overbake resistance. It is soluble in aliphatic and aromatic hydrocarbons, alcohol, glycol ethers, ketones, and water. It is designed to be applied to metal decorating, coil coatings, appliance finishes, and OEM coatings. view less | |
| NACURE® 1419 | King Industries, Inc. | NACURE® 1419 is a covalently blocked Dinonylnaphthalenesulfonic acid (DNNSA) stimulant. The polymeric moiety stays in the system and is capable of responding with the crosslinking agent. It offers low conductivity, good salt spray properties and adhesion, and is hardly affected by pigment absorption. This product is not soluble...view more NACURE® 1419 is a covalently blocked Dinonylnaphthalenesulfonic acid (DNNSA) stimulant. The polymeric moiety stays in the system and is capable of responding with the crosslinking agent. It offers low conductivity, good salt spray properties and adhesion, and is hardly affected by pigment absorption. This product is not soluble in water. It can be applied in electrostatic spray, can coatings, coil coatings, electrocoat, and metal decorating. This product appears as a clear and dark liquid. view less | |
| Ottopol 510-28 | Gellner Industrial, LLC | Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as ...view more Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as well as excellent solvent, salt fog, and alkali-resistance. Ottopol 510-28 offers good adhesion to non-porous surfaces and provides better storage stability, superior hardness, and improved flow. It imparts superb weatherability and improved solubility. view less | |
| REAXIS® S72 | Reaxis Inc. | REAXIS® S72 is a very high quality stable aqueous tin salt solution that is manufacuted by a proprietary process to insure consistently low impurity levels. A clear and colorless liquid, it is soluble in water and most dilute acids and will decompose in a...view more REAXIS® S72 is a very high quality stable aqueous tin salt solution that is manufacuted by a proprietary process to insure consistently low impurity levels. A clear and colorless liquid, it is soluble in water and most dilute acids and will decompose in alkali hydroxide solutions. This product finds use in Sn/Pd activator formulations for POP. It is also a preferred tin source in electrolytic baths for tin plating. REAXIS® S72 has also been used as a reducing agent. view less | |
| HEUCORIN® RZ | Heubach Ltd | HEUCORIN® RZ is a zinc-5-nitroisophthalate, an effective organic inhibitor based on the zinc salt of an organic nitro compound, for use as an organic corrosion inhibitor for the application in Protective Coatings. This product has a moisture content of 5%, an organic content of typ. 49%, and a water-soluble...view more HEUCORIN® RZ is a zinc-5-nitroisophthalate, an effective organic inhibitor based on the zinc salt of an organic nitro compound, for use as an organic corrosion inhibitor for the application in Protective Coatings. This product has a moisture content of 5%, an organic content of typ. 49%, and a water-soluble chloride of max. 0.025%. By adding very small quantities of HEUCORIN® RZ and HEUCOPHOS® pigments and thus taking advantage of unique organic-norganic synergies, it is possible to improve existing protective coatings to some significant extent. view less | Request Sample |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insoluble...view more DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. view less | |
| High Chlorinated Polyethylene-YURON HCPE | Yuron New Material | High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance an...view more High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas. HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less | |
| High Chlorinated Polyethylene-YURON HCPE-M | Yuron New Material | High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance ...view more High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas. HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less | |
| CALGON® N New | ICL Phosphate Specialty | CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability wh...view more CALGON® N New is a dispersing agent for emulsion paints, plasters and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. CALGON® N new is easily soluble since the product is agglomerated, it improves the storage stability when applied in combination with polyacrylates like LOPON® 800, and due to its high dispersing effectivity, optimal particle size of the pigment slurry is rapidly achieved. This product is suitable as a dispersing agent for emulsion paints and plasters, slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions to achieve high solid contents of emulsion paints with low viscosity. view less | Request Sample |
| PChem® BM65C | Pioneer Chemicals Co., Ltd. | PChem® BM65C, in the form of a powder, is a copolymer of methyl methacrylate that is a multi-usage thermoplastic acrylic resin with durability, high purity, salt spray resistance, and excellent weather-ability. It is easily soluble in numerous organic sol...view more PChem® BM65C, in the form of a powder, is a copolymer of methyl methacrylate that is a multi-usage thermoplastic acrylic resin with durability, high purity, salt spray resistance, and excellent weather-ability. It is easily soluble in numerous organic solvents such as chlorinated solvents, ketones, aromatic hydrocarbons, esters, and it has excellent compatibility with other film forming resins, such as plasticizer, cellulose, and vinyl resins. PChem® BM65C has application in tile paint, concrete sealant/hardener, color concentrates, architecture anti-corrosive coatings, road marking, and marine and container coatings. It has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 8.0 mgKOH/g, and an inherent viscosity of 0.19. view less | |
| POLYRON® N New | ICL Phosphate Specialty | POLYRON® N New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. This product is easily soluble since it is agglomerated. It improves the storage stability when appli...view more POLYRON® N New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. This product is easily soluble since it is agglomerated. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size of the pigment slurry is rapidly achieved, and it is well suitable as dispersing agent for emulsion paints and plasters. This product also slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. The usual dosage of POLYRON® N new in formulation is 0.05 – 0.15 %. view less | Request Sample |
