| Strontium Chromate | BassTech International | Strontium Chromate is a yellow powder which is used as an anti-corrosive pigment in paint, coatings, and inks. | |
| Troymax™ Strontium 10 | Arxada – Troy Corporation | Troymax™ Strontium 10 is a liquid based on solution of Strontium carboxylates. | Request Sample |
| Durham Strontium 24 | Huntsman Pigments & Additives | Durham Overbased Strontium 24 carboxylates are low viscosity, pale yellow coloured paint driers based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Overbased strontium is used in conjunction with Drycoat for the optim...view more Durham Overbased Strontium 24 carboxylates are low viscosity, pale yellow coloured paint driers based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Overbased strontium is used in conjunction with Drycoat for the optimum cobalt-free solution and also traditional driers such Cobalt, Manganese and Calcium. view less | |
| Strontium Chromate L203E | SNCZ Société Nouvelle des Couleurs Zinciques | Strontium Chromate L203E is a low dust yellow powder. This is a stable and non-hygroscopic powder with a low tinting strength, and it is easily dispersed. Strontium Chromate L203E is compatible with most resin systems. | Request Sample |
| Durham Strontium 18 | Huntsman Pigments & Additives | Durham Strontium 18 carboxylates are low viscosity, pale yellow coloured paint driers based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. This product has a strontium content of 18% and VOC of 628 g/l. | |
| Durham Strontium 10WM | Huntsman Pigments & Additives | Durham Strontium 10WM is a water miscible paint drier, based on saturated branched-chain synthetic organic acids in a hydrocarbon solvent. It has been specifically developed for use with water thinned alkyd and epoxy ester systems. This product has a str...view more Durham Strontium 10WM is a water miscible paint drier, based on saturated branched-chain synthetic organic acids in a hydrocarbon solvent. It has been specifically developed for use with water thinned alkyd and epoxy ester systems. This product has a strontium content of 10%. view less | |
| Strontium Octoate 10% | Patcham USA | Strontium Octoate 10% is a clear liquid used in conjunction with primary driers to ensure a balanced drying process of both the surface and body of the film. It is a good through drier. | Request Sample |
| Strontium Chromate 177 | WPC Technologies, Inc. | Strontium Chromate 177 is a yellow-colored, low dust, very low oil absorption, corrosion inhibitor pigment in a powder form. This product has an oil absorption of 11-20 lbs/100lbs and a specific gravity of 3.75 g/cm3. It is most commonly used in high-soli...view more Strontium Chromate 177 is a yellow-colored, low dust, very low oil absorption, corrosion inhibitor pigment in a powder form. This product has an oil absorption of 11-20 lbs/100lbs and a specific gravity of 3.75 g/cm3. It is most commonly used in high-solids primer applications. view less | |
| Strontium Chromate 176 | WPC Technologies, Inc. | Strontium Chromate 176 is a yellow-colored, low dust, low oil absorption, corrosion inhibitor pigment in a powder form. This product has an oil absorption of 18-25 lbs/100lbs and a specific gravity of 3.75 g/cm3. It is most commonly used in aqueous and so...view more Strontium Chromate 176 is a yellow-colored, low dust, low oil absorption, corrosion inhibitor pigment in a powder form. This product has an oil absorption of 18-25 lbs/100lbs and a specific gravity of 3.75 g/cm3. It is most commonly used in aqueous and solvent-borne paint systems and coil primers. view less | |
| Durham Strontium 10 Neutral | Huntsman Pigments & Additives | Durham Strontium 10 Neutral is a low viscosity, pale yellow coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatised high flash solvent. It is an ideal replacement for lead, with regard to drying properties and toxicity. ...view more Durham Strontium 10 Neutral is a low viscosity, pale yellow coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatised high flash solvent. It is an ideal replacement for lead, with regard to drying properties and toxicity. This product has a through drying action which prevents haze and wrinkling and does not lead to any excess yellowing. It has a strontium content of 10% and VOC of 573 g/l. view less | |
| No. 11 Strontium Phosphate | NiCHEM CORP. | No. 11 Strontium Phosphate is a non-toxic anti-corrosive, lead free, chrome free, pigment exhibiting outstanding resistance to salt spray, rust creepage and flash rusting in water systems as well as solvent type primers. It is a fine white powder that has...view more No. 11 Strontium Phosphate is a non-toxic anti-corrosive, lead free, chrome free, pigment exhibiting outstanding resistance to salt spray, rust creepage and flash rusting in water systems as well as solvent type primers. It is a fine white powder that has a particle size between 10 to 20 μm. view less | |
| Durham Strontium 18 Neo | Huntsman Pigments & Additives | Durham Strontium 18 Neo is a low viscosity, pale yellow coloured paint drier based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Overbased strontium carboxylates are high performance through driers and are excellent r...view more Durham Strontium 18 Neo is a low viscosity, pale yellow coloured paint drier based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Overbased strontium carboxylates are high performance through driers and are excellent replacements for both lead and zirconium in many systems. The through drying action prevents haze and wrinkling and does not lead to any excess yellowing. Overbased strontium is used in conjunction with Nuodex Drycoat for the optimum cobalt-free solution and also traditional driers such cobalt, manganese and calcium. view less | |
| No. 3 Strontium Chromate | NiCHEM CORP. | No. 3 Strontium Chromate is a corrosion inhibiting pigment for use in solvent and water based primer systems. | |
| Strontium Chrome Yellow 1702 | Hangzhou Jiekai Chemical Co., Ltd. | Strontium Chrome Yellow 1702 is a mixture of zinc oxide and chromium oxide that can be used in paints, printing inks, and in stationery. This product contains greater than 40% of this mixture, and less than 0.1% of its mass is water soluble. | |
| 275-XF Strontium Chromate, E.D. | Lansco Colors | 275-XF Strontium Chromate, E.D. is an easy dispersing, low dusting, low oil absorption corrosion inhibitor. This product is used as a primer in aqueous or solvent based paint systems such as epoxies, alkyds, acrylics and urethanes. | |
| Yipin® Lemon Strontium Chrome Yellow 801 | Yipin Pigments, Inc. | Yipin® Lemon Strontium Chrome Yellow 801 is a yellow strontium chromate pigment in powder form. It has sieve residue of no more than 1.0%, strontium content of at least 43%, and chromium trioxide content of at least 41%. This product can be used in coatin...view more Yipin® Lemon Strontium Chrome Yellow 801 is a yellow strontium chromate pigment in powder form. It has sieve residue of no more than 1.0%, strontium content of at least 43%, and chromium trioxide content of at least 41%. This product can be used in coating applications. view less | |
| NOVINOX CAS06 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX CAS06 is a corrosion-inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with low tinting strength. NOVINOX CAS06 has been developed as a non-toxic and Eco-Friendly alternative to Strontium chromate in C...view more NOVINOX CAS06 is a corrosion-inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with low tinting strength. NOVINOX CAS06 has been developed as a non-toxic and Eco-Friendly alternative to Strontium chromate in Coil Coatings. Compatible with PU and PE/Melamine systems, NOVINOX CAS06 is our best high performance and cost effective alternative to Strontium chromate in Coil Coatings. view less | Request Sample |
| Durham VX124 | Huntsman Pigments & Additives | Durham VX124 is a stabilised, ready-to-use Cobalt/Calcium/Neutral Strontium drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier system, based in a de-aromatised hydrocarbon solv...view more Durham VX124 is a stabilised, ready-to-use Cobalt/Calcium/Neutral Strontium drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier system, based in a de-aromatised hydrocarbon solvent. This product is designed to deliver a drying solution in a wide range of different systems and strontium is an excellent lead replacement. The VOC of this product is 594 g/l. view less | |
| Nubirox 302 | Ferro Pigments | Nubirox 302 is a zinc and labeling-free white Anticorrosive piment. it is an Organophilized Calcium Strontium Phosphosilicate with improved wetting, enhanced performance and wider binder's compatibility in solventborne and waterborne systems. | |
| Durham VX159 | Huntsman Pigments & Additives | Durham VX159 is a ready to use combination drier based on Cobalt, Overbased Strontium and basic Calcium that has been formulated to function efficiently in a wide range of coating systems and unsaturated polyester resins. It is violet in colour and is a p...view more Durham VX159 is a ready to use combination drier based on Cobalt, Overbased Strontium and basic Calcium that has been formulated to function efficiently in a wide range of coating systems and unsaturated polyester resins. It is violet in colour and is a pre-blended combination based in a de-aromatised hydrocarbon solvent. This product was designed to deliver a drying solution in a wide range of different systems and strontium is an excellent lead replacement. The total metal content of this product is 12.3%. view less | |
| Nubirox 301 | Ferro Pigments | Nubirox 301 is a zinc and labeling-free, white Anticorrosive pigment. It is a Calcium Strontium Phosphosilicate that allows replacing standard Zinc Phosphate exhibiting similar or better performance in solventborne and solventborne systems. | |
| Durham Nuodex® Calcium 5A | Huntsman Pigments & Additives | Durham Nuodex® Calcium 5A Neutral carboxylates are pale yellow coloured paint driers, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. They are to be used in combination with Cobalt, Manganese, Strontium, Zirconium...view more Durham Nuodex® Calcium 5A Neutral carboxylates are pale yellow coloured paint driers, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. They are to be used in combination with Cobalt, Manganese, Strontium, Zirconium and Zinc. view less | |
| Pigment Red 48:3 | Nanjing Chemicals United Industrial Corp. Ltd. | Pigment Red 48:3 is also known as Strontium Red 2B and Permanent Red 2B. It has a heat resistance of 180ºC. This product is used in industrial paints and textile printing. Its C.I. name is Pigment Red 48:3 and the C.I. NO. is 15865:3. | |
| Corrosperse 176C | WPC Technologies, Inc. | Corrosperse 176C is a yellow-colored paste that is a 75% dispersion of Strontium Chromate in cyclohexanone. This product has a total solids content of 76-80% and a specific gravity of 2.0-2.2 g/cm3. It is most commonly used as a pigment in solvent-borne c...view more Corrosperse 176C is a yellow-colored paste that is a 75% dispersion of Strontium Chromate in cyclohexanone. This product has a total solids content of 76-80% and a specific gravity of 2.0-2.2 g/cm3. It is most commonly used as a pigment in solvent-borne coating applications. view less | |
| Corrosperse 176A-100 70% | WPC Technologies, Inc. | Corrosperse 176A-100 70% is a 70% yellow-colored paste dispersion of Strontium Chromate in Aromatic 100. This product has a total solids content of 71-76% and a specific gravity of 1.8-2.1 g/cm3. It is most commonly used as a pigment in solvent-borne prim...view more Corrosperse 176A-100 70% is a 70% yellow-colored paste dispersion of Strontium Chromate in Aromatic 100. This product has a total solids content of 71-76% and a specific gravity of 1.8-2.1 g/cm3. It is most commonly used as a pigment in solvent-borne primer applications. view less | |
| Corrosperse 176M | WPC Technologies, Inc. | Corrosperse 176M is a yellow paste that is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone. This product has a total solids content of 69-74% and a specific gravity of 1.85-1.95 g/cm3. It is most commonly used as a pigment in solvent-borne pr...view more Corrosperse 176M is a yellow paste that is a 70% dispersion of Strontium Chromate in Methyl Amyl Ketone. This product has a total solids content of 69-74% and a specific gravity of 1.85-1.95 g/cm3. It is most commonly used as a pigment in solvent-borne primer applications. view less | |
| Nuodex® Manganese 0.5 | Huntsman Pigments & Additives | Nuodex® Manganese 0.5 is a low viscosity, red-brown coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Manganese 0.5 is to be used in combination with Calcium, Strontium, Zirconium and Amines. M...view more Nuodex® Manganese 0.5 is a low viscosity, red-brown coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Manganese 0.5 is to be used in combination with Calcium, Strontium, Zirconium and Amines. Manganese 0.5 is also effective as a drier in printing ink applications. view less | |
| Durham Nuodex® Manganese 8 Neo | Huntsman Pigments & Additives | Durham Nuodex® Manganese 8 Neo is a low viscosity, red-brown coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Manganese is to be used in combination with calcium, strontium, zirconium and amin...view more Durham Nuodex® Manganese 8 Neo is a low viscosity, red-brown coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Manganese is to be used in combination with calcium, strontium, zirconium and amines. Manganese is also effective as a drier in printing ink applications. view less | |
| Corrosperse 176E | WPC Technologies, Inc. | Corrosperse 176E is a yellow paste that is a 65% dispersion of Strontium Chromate in Glycol Ether EB. This product has a total solids content of 67-72% and a specific gravity of 1.8-2.0 g/cm3. It is most commonly used as a pigment in solvent and water-bor...view more Corrosperse 176E is a yellow paste that is a 65% dispersion of Strontium Chromate in Glycol Ether EB. This product has a total solids content of 67-72% and a specific gravity of 1.8-2.0 g/cm3. It is most commonly used as a pigment in solvent and water-borne primer applications. view less | |
| Durham VX71 | Huntsman Pigments & Additives | Durham VX71 is a stabilised, ready-to-use Cobalt/Calcium/Strontium drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier system, based in a de-aromatised hydrocarbon solvent and/o...view more Durham VX71 is a stabilised, ready-to-use Cobalt/Calcium/Strontium drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier system, based in a de-aromatised hydrocarbon solvent and/or alcohol. This product has VOC of 679 g/l. view less | |
| HEUCOPHOS® SRPP | Heubach Ltd | HEUCOPHOS® SRPP is a controlled adjusted modified strontium aluminium polyphosphate hydrate. HEUCOPHOS® SRPP is a special adjustment of HEUCOPHOS® SAPP for the application in coil coatings and aircraft primers. This product has a pH value of 4.5-6.0, a co...view more HEUCOPHOS® SRPP is a controlled adjusted modified strontium aluminium polyphosphate hydrate. HEUCOPHOS® SRPP is a special adjustment of HEUCOPHOS® SAPP for the application in coil coatings and aircraft primers. This product has a pH value of 4.5-6.0, a conductivity of max. 1500 [μS/cm], and density of typ. 2.9g/cm^3. view less | Request Sample |
| Durham VX87 | Huntsman Pigments & Additives | Durham VX87 is a ready to use combination drier based on cobalt, overbased strontium and basic calcium that has been formulated to function efficiently in a wide range of coating systems and unsaturated polyester resins. Durham VX87 is violet in colour an...view more Durham VX87 is a ready to use combination drier based on cobalt, overbased strontium and basic calcium that has been formulated to function efficiently in a wide range of coating systems and unsaturated polyester resins. Durham VX87 is violet in colour and is a pre-blended combination based in a de-aromatised hydrocarbon solvent. view less | |
| NOVINOX PAS | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAS is a corrosion inhibiting pigment suitable for a wide range of application. It is a stable and nonhygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAS is suitable with a wide range of resins, both solvent and water based. NOVINOX PAS is also an excellent alternative to Strontium...view more NOVINOX PAS is a corrosion inhibiting pigment suitable for a wide range of application. It is a stable and nonhygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAS is suitable with a wide range of resins, both solvent and water based. NOVINOX PAS is also an excellent alternative to Strontium chromate in Coil Coatings. view less | Request Sample |
| Durham Nuodex® Zinc 8 | Huntsman Pigments & Additives | Durham Nuodex® Zinc 8 carboxylates are low colour paint driers and functional additives based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Zinc Carboxylates are used in conjunction with Cobalt, Manganese, Strontium a...view more Durham Nuodex® Zinc 8 carboxylates are low colour paint driers and functional additives based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Zinc Carboxylates are used in conjunction with Cobalt, Manganese, Strontium and Barium. In addition zinc carboxylates can be used as an alternative to copper for the treatment of fibrous materials. view less | |
| Durham Nuodex® Zinc 9.6 | Huntsman Pigments & Additives | Durham Nuodex® Zinc 9.6 carboxylates are low colour paint driers and functional additives based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Zinc Carboxylates are used in conjunction with Cobalt, Manganese, Strontium...view more Durham Nuodex® Zinc 9.6 carboxylates are low colour paint driers and functional additives based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Zinc Carboxylates are used in conjunction with Cobalt, Manganese, Strontium and Barium. In addition zinc carboxylates can be used as an alternative to copper for the treatment of fibrous materials. view less | |
| NOVINOX ACE110 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX ACE110 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX ACE110 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate ...view more NOVINOX ACE110 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX ACE110 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate for Coil Coatings. Compatible with PU and PE/Melamine systems, NOVINOX ACE110 gives excellent anticorrosive performance in Coil Coatings applied to HDGS, Galfan, Galvalume and CRS. view less | Request Sample |
| NOVINOX PAM | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAM is a corrosion inhibiting pigment suitable for Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAM has been developed to be an alternative to Strontium chromate...view more NOVINOX PAM is a corrosion inhibiting pigment suitable for Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAM has been developed to be an alternative to Strontium chromate in Coil Coatings. It is compatible with PU and PE/Melamine systems. It gives excellent anti-corrosive performance in Coil Coatings applied to Galvalume. view less | Request Sample |
| Durham VX161 | Huntsman Pigments & Additives | Durham VX161 is a ready to use combination drier based on Cobalt, Overbased Strontium and basic Calcium that has been formulated to function efficiently in a wide range of coating systems and unsaturated polyester resins. It combines primary, through and ...view more Durham VX161 is a ready to use combination drier based on Cobalt, Overbased Strontium and basic Calcium that has been formulated to function efficiently in a wide range of coating systems and unsaturated polyester resins. It combines primary, through and auxiliary driers in the formulation to offer a complete drying solution. The total metal content of this product is 4.2%. view less | |
| HEUCOPHOS® ZCP-Plus | Heubach Ltd | HEUCOPHOS® ZCP-Plus is a zinc calcium strontium aluminum orthophosphate silicate hydrate. This product contains WSA (Wide Spectrum Anticorrosives) and is ideal for application in both conventional and, in particular, modern resin systems. It has a Zinc as...view more HEUCOPHOS® ZCP-Plus is a zinc calcium strontium aluminum orthophosphate silicate hydrate. This product contains WSA (Wide Spectrum Anticorrosives) and is ideal for application in both conventional and, in particular, modern resin systems. It has a Zinc as ZnO content of 35.5-39.0%, a loss on ignition at 600°C of 5.5-10.0, and a conductivity of max. 100μS/cm. view less | Request Sample |
| HEUCOPHOS® SAPP | Heubach Ltd | HEUCOPHOS® SAPP is a strontium aluminium polyphosphate hydrate that can be used for in two-part epoxy coating systems. Its electrochemical activity in combination with improved long-term protection offers advantages for a wide range of high performance co...view more HEUCOPHOS® SAPP is a strontium aluminium polyphosphate hydrate that can be used for in two-part epoxy coating systems. Its electrochemical activity in combination with improved long-term protection offers advantages for a wide range of high performance coatings. This product has a pH level of 4.5-6.0, a density of tip. 2.9g/cm^3, and a loss on ignition 600°C of 9.5-15.0%. view less | Request Sample |
| NOVINOX PPS10 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PPS10 is a Zinc Strontium Calcium Phosphosilicate designed to offer a better protection against corrosion than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PPS10 has been specially f...view more NOVINOX PPS10 is a Zinc Strontium Calcium Phosphosilicate designed to offer a better protection against corrosion than standard Zinc Phosphate. It is a stable and non-hygroscopic white powder, and it is easily dispersed. NOVINOX PPS10 has been specially formulated to take advantage of the complementary actions of each components of the pigment. It is compatible with a wide range of solvent and water based resins. view less | Request Sample |
| NOVINOX PAZ | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAZ is suitable with a wide range of resins, both solvent and water based. NOVINOX PAZ is also an excellent alternative to Strontium...view more NOVINOX PAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as Coil Coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. NOVINOX PAZ is suitable with a wide range of resins, both solvent and water based. NOVINOX PAZ is also an excellent alternative to Strontium chromate in Coil Coatings. view less | Request Sample |
| Durham Nuodex® Cobalt 10 Neo | Huntsman Pigments & Additives | Durham Nuodex® Cobalt 10 Neo is a low viscosity, blue-violet paint drier and accelerator for unsaturated polyester resins, based on saturated branched-chain synthetic acids in a de-aromatised hydrocarbon solvent. It is a primary paint drier which exhibits rapid surface drying. In coatings systems, Cobalt should be used in combination with Calcium, Strontium...view more Durham Nuodex® Cobalt 10 Neo is a low viscosity, blue-violet paint drier and accelerator for unsaturated polyester resins, based on saturated branched-chain synthetic acids in a de-aromatised hydrocarbon solvent. It is a primary paint drier which exhibits rapid surface drying. In coatings systems, Cobalt should be used in combination with Calcium, Strontium and Zirconium. This product has VOC of 314 g/l. view less | |
| Durham VX125 | Huntsman Pigments & Additives | Durham VX124 is a stabilised, ready-to-use Cobalt/Calcium/Neutral Strontium drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier system, based in a de-aromatised hydrocarbon solv...view more Durham VX124 is a stabilised, ready-to-use Cobalt/Calcium/Neutral Strontium drier combination suitable for use in a wide range of coating systems. It is a violet coloured single addition, pre-blended drier system, based in a de-aromatised hydrocarbon solvent. This product combines primary, through and auxiliary driers in the formulation to offer a complete drying solution. The volatile organic content of this product is 650 g/l. view less | |
| Durham Nuodex® Calcium 10 | Huntsman Pigments & Additives | Durham Nuodex® Calcium 10 carboxylate is a pale yellow coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. The calcium promotes through drying, prevents haze and wrinkling and can be used to promote the wetting of difficult to disperse pigments. This product should be used in combination with DryCoat, Cobalt, Manganese, Strontium...view more Durham Nuodex® Calcium 10 carboxylate is a pale yellow coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. The calcium promotes through drying, prevents haze and wrinkling and can be used to promote the wetting of difficult to disperse pigments. This product should be used in combination with DryCoat, Cobalt, Manganese, Strontium, Zirconium, and Zinc. The calcium content of this product is 10%. view less | |
| Durham Nuodex® Barium 12.5 | Huntsman Pigments & Additives | Durham Nuodex® Barium 12.5 is a pale yellow coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Barium carboxylates are auxiliary paint driers that promote through drying, promote high gloss retention, and decreases absorption of primary driers. It is normally used in combination with driers such as Cobalt, Calcium, Strontium...view more Durham Nuodex® Barium 12.5 is a pale yellow coloured paint drier, based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Barium carboxylates are auxiliary paint driers that promote through drying, promote high gloss retention, and decreases absorption of primary driers. It is normally used in combination with driers such as Cobalt, Calcium, Strontium, Manganese, Zinc and Zirconium. The barium content of this product is 12.5%. view less | |
| Durham Nuodex® Cobalt 8 | Huntsman Pigments & Additives | Durham Nuodex® Cobalt 8 is a low viscosity, blue-violet paint drier and accelerator for unsaturated polyester resins, based on saturated branched-chain synthetic acids in a de-aromatised hydrocarbon solvent. It is a primary paint drier which exhibits rapid surface drying. In coatings systems, Cobalt should be used in combination with Calcium, Strontium...view more Durham Nuodex® Cobalt 8 is a low viscosity, blue-violet paint drier and accelerator for unsaturated polyester resins, based on saturated branched-chain synthetic acids in a de-aromatised hydrocarbon solvent. It is a primary paint drier which exhibits rapid surface drying. In coatings systems, Cobalt should be used in combination with Calcium, Strontium, and Zirconium. This product has VOC of 532 g/l and a cobalt content of 8%. view less | |
| Durham Nuodex® Cerium 10 | Huntsman Pigments & Additives | Durham Nuodex® Cerium 10 is a yellow-brown coloured, low viscosity paint drier based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Cerium carboxylates increase film hardness and toughness of baking enamels. It is important to note that an overloading of cerium drivers can increase yellowing. Durham Nuodex Cerium 10 is to be used in combination with Cobalt, Calcium, Strontium...view more Durham Nuodex® Cerium 10 is a yellow-brown coloured, low viscosity paint drier based on saturated branched-chain synthetic acids in a de-aromatized hydrocarbon solvent. Cerium carboxylates increase film hardness and toughness of baking enamels. It is important to note that an overloading of cerium drivers can increase yellowing. Durham Nuodex Cerium 10 is to be used in combination with Cobalt, Calcium, Strontium, and Zirconium. The cerium content of this product is 10%. view less | |
| NOVINOX XCA02 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX XCA02 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX XCA02 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate...view more NOVINOX XCA02 is a corrosion inhibiting pigment designed for Coil Coatings. It is a stable and easily dispersed white powder with a low tinting strength. NOVINOX XCA02 has been developed as a non toxic and Eco-Friendly alternative to Strontium chromate in Coil Coatings. Compatible with PU and PE/Melamine systems, NOVINOX XCA02 gives excellent anti-corrosive performance in Coil Coatings applied to HDGS, Galfan, Galvalume and CRS. NOVINOX XCA02 may be used alone or in association with a phosphate based pigment such as Zinc Phosphate PZ20, NOVINOX PAT 15 or NOVINOX ACE20. view less | Request Sample |
| HALOX® SW-111 | ICL Phosphate Specialty | HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It ma...view more HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne systems. It has a shelf life of 36 months. view less | Request Sample |
| 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) | GRACE | 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the catalyst. SHIELDEX® C 303 is a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium...view more 1-Pack Polyurethane Coil Coating Primer (Formulation #2.3) is a guideline formulation based on Dynapol L205 (high molecular weight polyester resin) crosslinked with Desmodur BL 3175 (a blocked isocyanate). Dabco T12 (dibutyltindilaurate) was used as the catalyst. SHIELDEX® C 303 is a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. The 1-Pack-Polyurethane primer was tested on Bonder 1303 treated galvanised steel test panels (ex Chemetall) at a bar coated dry film thickness of 5 microns. Cure was to a peak metal temperature (PMT) of 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 °C. view less | |
| HALOX® SZP-395 | ICL Phosphate Specialty | HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety ...view more HALOX® SZP-395 by ICL is a white, non-refractive, efficient, and versatile corrosion-inhibiting pigment designed for protective coating systems. It is a proprietary blend of strontium and zinc phosphosilicates. It is recommended for use in a wide variety of resin systems such as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 make it the pigment of choice in thin-film applications (<1 mil or 25 μm). The dosage level is 2-5% for water-based systems and 3-7% for solvent-based coatings based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| Polyester-Melamine Coil Coating Primer (Formulation #2.1) | GRACE | Polyester-Melamine Coil Coating Primer (Formulation #2.1) is a guideline formulation offered to highlight the anti-corrosive and adhesion performance of SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium...view more Polyester-Melamine Coil Coating Primer (Formulation #2.1) is a guideline formulation offered to highlight the anti-corrosive and adhesion performance of SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Dynapol L205 and Dynapol L208 are high molecular weight polyester resins widely used in coil coating primer applications for both building and domestic appliance applications. Cymel 350 is a typical melamine based crosslinker. The cure reponse within this formulation was controlled by the use of Silane A187 (Silane Ester), Epoxy blocked Phosphoric acid (co-catalyst), EDBSA (sulphonic acid co-catalyst) and Halox 650 (Dicarboxylic acid). These components prevent the interaction of SHIELDEX® anti-corrosive pigments with the acid catalysts and any acidic functionality on the resins, thus ensuring maximum cure response. view less | |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...view more HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium...view more HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| Epoxy Coil Coating Primer (Formulation #2.2) | GRACE | Epoxy Coil Coating Primer (Formulation #2.2) is a formulation that utilizes SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Epikote 1007 and E...view more Epoxy Coil Coating Primer (Formulation #2.2) is a formulation that utilizes SHIELDEX® C 303, a high performance non toxic heavy metal free, anti-corrosive pigment specially designed to replace Strontium Chromate in coil coating primers. Epikote 1007 and Epikote 1009 are standard epoxy resins used in coil coating primer applications. UFR 80 is a typical urea based crosslinker used in these applications. The cure response within this formulation was controlled by the use of Epoxy blocked Phosphoric acid (co-catalyst) and Halox 650 (dicarboxylic-acid co-catalyst). These components prevent the interaction of SHIELDEX® anti-corrosive pigment with the acid catalysts and any acid funtionality on the resin systems, thus ensuring maximum cure response. The SHIELDEX® C 303 anti-corrosive pigment containing epoxy coil primer was applied on Bonder 1303 (ex Chemetall) and Granodine C 108 (ex Henkel) treated galvanised steel test panels. The primer was applied by bar coater to a dry film thickness of 5 – 7 microns. Cure was to a peak metal temperature (PMT) of 216 – 224 °C. A polyester-melamine topcoat was applied to a bar coated dry film thickness of 20 – 25 microns and cured to a PMT of 232 – 241 °C. view less | |
| Zinc Chromate CZ20 | SNCZ Société Nouvelle des Couleurs Zinciques | Zinc Chromate CZ20 is a low dust, yellow powder. It is a stable and non-hygroscopic powder with a low tinting strength, and it is easily dispersed. | Request Sample |
| Barium Chromate M20 | SNCZ Société Nouvelle des Couleurs Zinciques | Barium Chromate M20 (BaCrO4) is a low-dust yellow micronised powder that contains no soluble salts which might have a detrimental effect on the anticorrosive performance. Because of its structure and colour, M20 has a slight tinting strength that is no...view more Barium Chromate M20 (BaCrO4) is a low-dust yellow micronised powder that contains no soluble salts which might have a detrimental effect on the anticorrosive performance. Because of its structure and colour, M20 has a slight tinting strength that is not hygroscopic. It is easily dispersible and has a low oil absorption. This product's lightfastness is excellent and it is perfectly stable up to 600°C. Barium Chromate M20 passivates metals by building up a surface bonded protective metal oxide layer (anodic passivation). It has a wide spectrum of efficiency in terms of metal protection. view less | Request Sample |
| 2B Red 48:3 Product Code - TCR48303 | Trust Chem | 2B Red 48:3 Product Code - TCR48303 is a red powder in chemical class BONA, Sr and a color index number C.I. pigment of red 48:3. It has a specific gravity (water=1) of 1.60~1.90, a specific surface of 30~60 m^2/g, and a bulk volume of 2.2~2.6 l/kg. This ...view more 2B Red 48:3 Product Code - TCR48303 is a red powder in chemical class BONA, Sr and a color index number C.I. pigment of red 48:3. It has a specific gravity (water=1) of 1.60~1.90, a specific surface of 30~60 m^2/g, and a bulk volume of 2.2~2.6 l/kg. This product can be applied in printing inks and paint. view less | |
| Fast Red BBS | Hangzhou Hongyan Pigment Chemical Co., Ltd. | Fast Red BBS is a red pigment. This product is most commonly used in industrial paint applications. It has a heat resistance of 180°C and a pH value of 7-8. | |
| Pigment Red 3483 | Crown Chemical Co., Ltd. | Pigment Red 3483 is a powdered pigment from the Crown pigment series. They exhibit brilliant hue, stable physical properties, high color saturation, strong color strength and stable physical properties. Applications include coloring for rubber, ink, coati...view more Pigment Red 3483 is a powdered pigment from the Crown pigment series. They exhibit brilliant hue, stable physical properties, high color saturation, strong color strength and stable physical properties. Applications include coloring for rubber, ink, coating, and stationery. view less | |
| Fast Red BBS | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Fast Red BBS is a red pigment that has high transparency and good resistance to solvents. This product has a density of 1.8 g/cm3 and a pH value of 7.0-8.0, and it is commonly used in industrial paints and water-based decorative paints. | |
| Graphtol Fire Red 3RLP - Pigment Red 48:3 | Clariant Plastics and Coatings (Pigments) | Graphtol Fire Red 3RLP is an eonomical bluish red pigment with excellent dispersibility. It is suitable for the mass coloration of films and PP fibres, also recommended for cable applications, injection, and blow moulding. | Request Sample |
| Fast Scarlet BBS ECR04803 Pigment Red 48:3 | Hangzhou Epsilon Chemical Co., Ltd. | Fast Scarlet BBS ECR04803 Pigment Red 48:3 is a stronitium 2B pigment, it is the universal type. | |
| Fast Scarlet BBS-W ECR04803W Pigment Red 48:3 | Hangzhou Epsilon Chemical Co., Ltd. | Fast Scarlet BBS-W ECR04803W Pigment Red 48:3 is a stronitium 2B pigment withhigh gloss and low viscosity. | |
| Fast Scarlet 2BSP ECR04803P Pigment Red 48:3 | Hangzhou Epsilon Chemical Co., Ltd. | Fast Scarlet 2BSP ECR04803P Pigment Red 48:3 is a stronitium 2B pigment with good dispersion, excellent heat and migration fastness, due to excellent textile fiber fastness, ECR04803P is especially for house decoration and carpet, equivalent to Ciba Irgal...view more Fast Scarlet 2BSP ECR04803P Pigment Red 48:3 is a stronitium 2B pigment with good dispersion, excellent heat and migration fastness, due to excellent textile fiber fastness, ECR04803P is especially for house decoration and carpet, equivalent to Ciba Irgalite Red 2BSP. Yellowish and bluish shade are available. view less | |
| 3124 Fast Red BBS | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3124 Fast Red BBS has a pH value of 7.0, oil absorption of equal to or less than 65, and a heat resistance of 200. It has recommended applications in PMMA and solvent-based inks, and possible applications in water-based inks and solvent-based paints. | |
| Pigment Red 48:3 (Corimax Red 2BS) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Red 48:3 (Corimax Red 2BS) is a monoazo red pigment with a bluish red hue. It offers heat fastness and light fastness in plastic, coatings, and ink. This product is recommended for decorative, general industrial, and powder coatings; PVC, PP, PE, ...view more Pigment Red 48:3 (Corimax Red 2BS) is a monoazo red pigment with a bluish red hue. It offers heat fastness and light fastness in plastic, coatings, and ink. This product is recommended for decorative, general industrial, and powder coatings; PVC, PP, PE, and PU plastics; and offset, water-based, solvent-based, and UV inks. view less | |
| Pigment Red 48:3 (Corimax Red 2BSP) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Red 48:3 (Corimax Red 2BSP) is a monoazo red pigment with a bluish red hue. It offers heat fastness and light fastness in plastic, coatings, and ink. | |
| Pigment Red 3403 | Crown Chemical Co., Ltd. | Pigment Red 3403 is a powdered pigment from the Crown pigment series. They exhibit brilliant hue, stable physical properties, high color saturation and strong color strength. Applications include coloring for plastic, rubber, ink, coating, and stationery. | |
| Pigment Red 3403H | Crown Chemical Co., Ltd. | Pigment Red 3403H is a powdered pigment from the Crown pigment series. They exhibit brilliant hue, stable physical properties, high color saturation and strong color strength. Applications include coloring for plastic, rubber, ink, coating, PRC, and stati...view more Pigment Red 3403H is a powdered pigment from the Crown pigment series. They exhibit brilliant hue, stable physical properties, high color saturation and strong color strength. Applications include coloring for plastic, rubber, ink, coating, PRC, and stationery. view less | |
| Fast Red BBS | Hangzhou Jiekai Chemical Co., Ltd. | Fast Red BBS is a permanent red dye that can be used in solvent inks, aqueous inks, and aqueous coatings. This product's density is 1.8 g/cm3 and its pH value is 7.0. Its molecular weight is 506.44. | |
| Permanent Red GC48301 | Hangzhou Geecolor Chemical Co., Ltd | Permanent Red GC48301 is a red pigment that has high gloss, high transparency, and good resistance to solvents. This mono azo based pigment is recommended to be used in industrial paints and water-based decorative paints. | |
| Brigment Red 4832W | Ningbo Briscent Trade Co., Ltd. | Brigment Red 4832W is a pigment with a color index of PR48:3. This product is most commonly used in water-based and PA ink formulation applications. | |
| Fast Brilliant Red BBS | Ggink International Limited | Fast Brilliant Red BBS is a dry pigment, with a color index of PR 48:3. This product is used as a pigment in solvent based and powder industrial paint applications. | |
| Brigment Red BBS | Ningbo Briscent Trade Co., Ltd. | Brigment Red BBS is a pigment with a color index of PR48:3. This product is most commonly used in industrial paint applications. | |
| Brigment Red 4834 | Ningbo Briscent Trade Co., Ltd. | Brigment Red 4834 is a pigment with a color index of PR48:3. This product is most commonly used as a pigment in plastic manufacturing applications. | |
| PS 28-5333 PK PIGMENT VIOLET | Ferro Pigments | PS 28-5333 PK Pigment Violet is synthesized by the high temperature calcination of carefully selected raw materials under strict production procedures. It has excellent chemical resistance, outdoor durability, light fastness, and is non-bleeding and non-m...view more PS 28-5333 PK Pigment Violet is synthesized by the high temperature calcination of carefully selected raw materials under strict production procedures. It has excellent chemical resistance, outdoor durability, light fastness, and is non-bleeding and non-migratory. Quality controlled to give batch-to-batch consistency, it is an ideal choice for both plastics and coatings applications. view less |
