| LA-300 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...view more LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (22). LA-300 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. view less | |
| LA-350 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (23). LA-350 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. view less | |
| LA-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...view more LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (24). LA-400 has a specific gravity of 2.45, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. view less | |
| LA-500 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (25). LA-500 has a specific gravity of 2.5, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| LA-600 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (27). LA-600 has a specific gravity of 2.5, a bulk density of 43 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| LA-700 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (28). LA-700 has a specific gravity of 2.5, a bulk density of 40 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| LA-800 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (29). LA-800 has a specific gravity of 2.5, a bulk density of 35 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| CS-200 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-200, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...view more CS-200, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-200 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-200 has a specific gravity of 2.5, a bulk density of 63 lb/ft3, a hegman value of 2, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 78 to 83. view less | |
| CS-325 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-325, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...view more CS-325, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-325 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-325 has a specific gravity of 2.5, a bulk density of 60 lb/ft3, a hegman value of 3, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 80 to 85. view less | |
| CS-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | CS-400, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Gla...view more CS-400, glass powder, is a well-designed extender and glass filler made from 100% recycled glass. It is a white to off-white colored powder with an even particle size distribution. Scanning electron microscopy and X-ray diffraction endorse that the CS Glass powder contains no crystalline silica and is fully amorphous. CS-400 deals clean post-consumer filler for polymer-based systems where the uppermost brightness is not essential. The filler imparts chemical stability and admirable abrasion resistance to coatings and other polymer systems. CS-400 has a specific gravity of 2.5, a bulk density of 50 lb/ft3, a hegman value of 4 to 5, a pH of 10 to 11, a refractive index of 1.56, and a brightness of 85 to 90. view less | |
| Pyrogenic Silica RS-50 | Glassfillers.com (A unit of Vitrominerals Inc.) | Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic r...view more Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic rheology control and thickening agent in many polymer systems, such as unsaturated polyesters, adhesives, sealants, coatings, printing inks, etc. It can be used as active strengthening filler in silicone-elastomers and elastomers. Pyrogenic Silica RS-50 has a specific gravity of 2.2, a bulk density of 23 to 25 lb/ft3 vibrated, oil absorption of 65 g/100g, a pH of 6.0 (4% dispersion in water), a refractive index of 1.46, and a softening temperature of ~1600 °C. view less | |
| WhiteLite™ WL-32 | Glassfillers.com (A unit of Vitrominerals Inc.) | WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight th...view more WhiteLite™ WL-32 Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-32 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-32 has a bulk density of 50 lb/ft3, oil absorption of 22, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 4, and a brightness of 90 to 91 photovolt Y value. view less | |
| WL-42 | Glassfillers.com (A unit of Vitrominerals Inc.) | WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight t...view more WL-42, WhiteLite™ Lightweight Mineral Powder, is great in brightness, synthetic aluminosilicate product for extender applications and high performance filler. With a specific gravity of 2.46, WhiteLite™ engineered powders are 10 to 17% lighter in weight than traditional naturally mined mineral fillers, which permits larger volumetric extension when used in plastics and coatings. WL-42 improves a wide range of plastics, paints, adhesives, and coatings. Great reliable brightness, stain/scrub resistance, and tint retention can be accomplished in most coating and paint systems. WL-42 has a bulk density of 40 lb/ft3, oil absorption of 25, a pH of 7 ± 1, a refractive index of 1.5, a hegman value of 2, and a brightness of 90 to 91 photovolt Y value. view less | |
| Micro-Tri-Gloss | BYK-Gardner USA | Micro-Tri-Gloss combines 20°, 60°, 85° in one glossmeter - as handy as the one angle unit. Having three geometries in one unit allows you to be in compliance with international standards and to quickly recognize quality variations. |  |
| LC-L2 (Modularized UV-LED Light Source) | Hamamatsu Corporation | The LC-L2 modular spot light source is comprised of a small LED driver (part #: C10559-01) and an LED head unit (part #: L10561 and L10906 series). This UV-LED modular spot light source is very compact with high output intensity light, long life and low p...view more The LC-L2 modular spot light source is comprised of a small LED driver (part #: C10559-01) and an LED head unit (part #: L10561 and L10906 series). This UV-LED modular spot light source is very compact with high output intensity light, long life and low power consumption. An unusual feature of this unit is that it does not have a fan and does not require one for cooling, making this an easy addition to a clean room. Various LED head units with different irradiation patterns and sizes are available. view less |  |
| Spectro-Guide | BYK-Gardner USA | Spectro-Guide offers total appearance control - color and gloss in one unit. The overall appearance of a product is influenced by color and gloss. The spectro-guide spectrophotometer is unique as it measures both attributes simultaneously. |  |
| LC-L5 G (UV-LED Light Source) | Hamamatsu Corporation | A linear irradiation type UV-LED unit, the LC-L5 G has high output (10,000 mW/cm^2), air cooling by fan, and a compact and light weight. It is recommended for UV ink drying, UV coating agent drying, and for fluorescence excitation/scratch & flaw inspectio...view more A linear irradiation type UV-LED unit, the LC-L5 G has high output (10,000 mW/cm^2), air cooling by fan, and a compact and light weight. It is recommended for UV ink drying, UV coating agent drying, and for fluorescence excitation/scratch & flaw inspection lighting. view less | |
| Minimaster Laboratory Disperser | NETZSCH Grinding & Dispersing | The NETZSCH MiniMaster Laboratory Dispersator (Model 50) produces consistently repeatable dispersions through faster mixing action and improved motor performance. This high-performance, high-speed unit ensures constant mixing speed regardless of product w...view more The NETZSCH MiniMaster Laboratory Dispersator (Model 50) produces consistently repeatable dispersions through faster mixing action and improved motor performance. This high-performance, high-speed unit ensures constant mixing speed regardless of product weight, viscosity or other variables. It circulates and shears dispersions and emulsions with ease, blending materials faster than other laboratory dispersers. view less |  |
| EXAKT 50 I | EXAKT Technologies Inc. | The EXAKT 50 I is an indispensable tool for the laboratory or small batch producer. The small three roll mill frame takes up little room on the lab bench, yet offers the operator the versatility of dispersing a wide variety of products. This unit is speci...view more The EXAKT 50 I is an indispensable tool for the laboratory or small batch producer. The small three roll mill frame takes up little room on the lab bench, yet offers the operator the versatility of dispersing a wide variety of products. This unit is specially designed for quantities up to 7 liters per hour. view less | |
| PML 2 | Bühler AG | The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true gr...view more The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true grinding applications, metal-free dispersion of electronic materials or nano applications – the PML 2 is the right solution. view less |  |
| High Shear Mixer | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...view more All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. view less |  |
| Powder Induction | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...view more All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. view less |  |
| PLACCEL 210N | Daicel (U.S.A.), Inc. | PLACCEL 210N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 210N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elastomers are solid tires, rollers, scratching blades of toner for copy machines. Because of their low content of low molecule oligomer unit...view more PLACCEL 210N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 210N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elastomers are solid tires, rollers, scratching blades of toner for copy machines. Because of their low content of low molecule oligomer unit, the so-called “blooming” is not likely to occur. view less | |
| Max-Shear Inline Disperser | NETZSCH Grinding & Dispersing | Compact enough to be included at virtually any point in your process. The self-pumping portable unit features rotor/stator based technology with multiple stator configurations available. Manufactured to extremely precise tolerances to eliminate product by...view more Compact enough to be included at virtually any point in your process. The self-pumping portable unit features rotor/stator based technology with multiple stator configurations available. Manufactured to extremely precise tolerances to eliminate product bypassing typical of other single stage dispersers. Exceptional high shear performance and powerful pumping action makes the Max-Shear ideal for emulsifying and processing hard-to-wet materials. view less |  |
| LC-L5 (UV-LED Light Source) | Hamamatsu Corporation | A linear irradiation type UV-LED unit, the LC-L5 comes in a new smaller package and will work in new production processes and devices which can not accomodate conventional lamps. The UV-LED spot lights are 90% smaller, use 1/30th power as ordinary UV lamp...view more A linear irradiation type UV-LED unit, the LC-L5 comes in a new smaller package and will work in new production processes and devices which can not accomodate conventional lamps. The UV-LED spot lights are 90% smaller, use 1/30th power as ordinary UV lamps, and cut CO2 emissions by 20,000 kg per year. These units produce stable and accurate outputs with a long service life and require no duct installation or chillers. view less |  |
| NETZSCH-Beadbox | NETZSCH Grinding & Dispersing | The System for Fast and Efficient Grinding Bead Maintenance - The NETZSCH-BeadBox is a device that makes it easy to empty and fill a mill with grinding beads without opening the grinding chamber. The unit consists of a pump station and a storage vessel wi...view more The System for Fast and Efficient Grinding Bead Maintenance - The NETZSCH-BeadBox is a device that makes it easy to empty and fill a mill with grinding beads without opening the grinding chamber. The unit consists of a pump station and a storage vessel with a shut-off device. Advantages: The NETZSCH-BeadBox simplifies and shortens grinding media maintenance and saves manpower. During the fi lling and emptying process, the operator can perform other tasks. view less |  |
| CM-3600d | Konica Minolta Sensing Americas, Inc. | The CM-3600d bench-top spectrophotometer is very accurate and repeatable instrument with the ability to measure color in any application. This horizontally oriented unit features various measuring functions, including reduced time switching between SCI an...view more The CM-3600d bench-top spectrophotometer is very accurate and repeatable instrument with the ability to measure color in any application. This horizontally oriented unit features various measuring functions, including reduced time switching between SCI and SCE filter movements and an ability to measure various sample sizes with interchangeable diameters. Using double-beam technology and a dual sensor, the CM-3600d can measure at 10nm over a full range of wavelengths from 360-740nm. view less |  |
| CM-3610d | Konica Minolta Sensing Americas, Inc. | The CM-3610d bench-top spectrophotometer is very accurate and repeatable instrument with the ability to measure color in any application. This vertically oriented unit features various measuring functions, including reduced time switching between SCI and ...view more The CM-3610d bench-top spectrophotometer is very accurate and repeatable instrument with the ability to measure color in any application. This vertically oriented unit features various measuring functions, including reduced time switching between SCI and SCE filter movements and an ability to measure various sample sizes with interchangeable diameters. Using double-beam technology and a dual sensor, the CM-3610d can measure at 10nm over a full range of wavelengths from 360-740nm. view less |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit...view more Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. view less |  |
| MacroMedia™ | Bühler AG | MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform prop...view more MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform properties achieved for the pre-ground intermediate products. This produces optimum results in fine grinding and consequently increases the quality of the end product. At the same time, the system reduces production costs due to an improved material yield and optimized energy efficiency compared with other pre-grinding solutions. view less |  |
| PLACCEL 220N | Daicel (U.S.A.), Inc. | PLACCEL 220 is polycaplolactone diol and its molecular weight is 2000. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. In particular, PLACCEL 220N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 220N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elastomers are solid tires, rollers, scratching blades of toner for copy machines. Because of their low content of low molecule oligomer unit...view more PLACCEL 220 is polycaplolactone diol and its molecular weight is 2000. Polycaprolactone diols have more excellent UV resistance and heat resistance than polyether diols, and a higher water resistance than adipate based polyester diols. In particular, PLACCEL 220N is characterized for its narrow molecular weight distribution. Polyurethane elastomers made from PLACCEL 220N show excellent abrasion resistance and compression permanent set resistance. The recommended applications of these polyurethane elastomers are solid tires, rollers, scratching blades of toner for copy machines. Because of their low content of low molecule oligomer unit, the so-called “blooming” is not likely to occur. view less | |
| CM-600d | Konica Minolta Sensing Americas, Inc. | The CM-600d is a Bluetooth enabled, ergonomically designed, handheld spectrophotometer with a color LCD screen and a fixed aperture setting (MAV: Φ8 mm/Φ11 mm). This unit displays the measured color on the screen, which allows the user to check the level ...view more The CM-600d is a Bluetooth enabled, ergonomically designed, handheld spectrophotometer with a color LCD screen and a fixed aperture setting (MAV: Φ8 mm/Φ11 mm). This unit displays the measured color on the screen, which allows the user to check the level of color difference or search for measured colors. It has a large memory capacity, allowing for 1,000 sets of target data and 4,000 sets of measured data. Target data collected and displayed using SpectraMagic NX software can be compared to two or more secondary targets, making this instrument ideal for demanding customers with strict requirements for R&D, QC, and CCM applications. view less |  |
| Siltech® C-20 | Siltech Corp. | Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less systems. It effectively reduces surface tension and provides mar resistance or slip finishes. It also provides other benefits such as leveling, wetting, flow-out and aids pigment dispersion. It is effective at low concentrations. The recommended concentration used is between-% weight percent based on total solids. It should be added during the final thinning step. Preliminary tests in laboratory or a small-scale production unit...view more Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less systems. It effectively reduces surface tension and provides mar resistance or slip finishes. It also provides other benefits such as leveling, wetting, flow-out and aids pigment dispersion. It is effective at low concentrations. The recommended concentration used is between-% weight percent based on total solids. It should be added during the final thinning step. Preliminary tests in laboratory or a small-scale production unit necessary to obtain optimum results. view less | |
| CM-700d | Konica Minolta Sensing Americas, Inc. | The CM-700d is a Bluetooth enabled, ergonomically designed, handheld spectrophotometer with a color LCD screen and a changeable aperture setting (MAV: Φ8 mm/Φ11 mm SAV: Φ3 mm/Φ6 mm). This unit displays the measured color on the screen, which allows the us...view more The CM-700d is a Bluetooth enabled, ergonomically designed, handheld spectrophotometer with a color LCD screen and a changeable aperture setting (MAV: Φ8 mm/Φ11 mm SAV: Φ3 mm/Φ6 mm). This unit displays the measured color on the screen, which allows the user to check the level of color difference or search for measured colors. It has a large memory capacity, allowing for 1,000 sets of target data and 4,000 sets of measured data. It also has dedicated buttons for frequently used operations. Target data collected and displayed using SpectraMagic NX software can be compared to two or more secondary targets, making this instrument ideal for demanding customers with strict requirements for R&D, QC, and CCM applications. view less |  |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...view more Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...view more Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| RHEOLATE® 255 | Elementis | RHEOLATE® 255 is a 25 % solution designed for use in conventional waterborne emulsion systems. This product is an additive with a high thickening effect in the medium-shear range (Stormer viscosity, Krebs Units). | Request Sample |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| VISIOMER® MPEG 500 MA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® MPEG 500 MA is a pure, water-free, and easy-to-handle Methoxy Polyethyleneglycol Methacrylate monomer in liquid form. It is water soluble and contains approximately 12 ethylene oxide (EO) units in the chain. | |
| Bayferrox® 318NM | LANXESS Inorganic Pigments | Bayferrox® 318NM is a synthetic iron oxide with the color index name Pigment Black 11 (PBk11). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 360 | LANXESS Inorganic Pigments | Bayferrox® 360 is a synthetic iron oxide with the color index name Pigment Black 11 (PBk11). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 918LOM | LANXESS Inorganic Pigments | Bayferrox® 918LOM is a synthetic iron oxide-alpha with the color index name Pigment Yellow (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 913LOM | LANXESS Inorganic Pigments | Bayferrox® 913LOM is a synthetic iron oxide-alpha with the color index name Pigment Yellow (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 3905 | LANXESS Inorganic Pigments | Bayferrox® 3905 is a synthetic iron oxide-alpha with the color index name Pigment Yellow (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 915 | LANXESS Inorganic Pigments | Bayferrox® 915 is a synthetic iron oxide-alpha with the color index name Pigment Yellow (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 943 | LANXESS Inorganic Pigments | Bayferrox® 943 is a synthetic iron oxide-gamma with the color index name Pigment Yellow (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 105M | LANXESS Inorganic Pigments | Bayferrox® 105M is a synthetic iron oxide-alpha with the color index name Pigment Red 101 (PR101). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 120M | LANXESS Inorganic Pigments | Bayferrox® 120M is a synthetic iron oxide-alpha with the color index name Pigment Red 101 (PR101). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 120NM | LANXESS Inorganic Pigments | Bayferrox® 120NM is a synthetic iron oxide-alpha with the color index name Pigment Red 101 (PR101). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 130BM | LANXESS Inorganic Pigments | Bayferrox® 130BM is a synthetic iron oxide-alpha with the color index name Pigment Red 101 (PR101). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 130M | LANXESS Inorganic Pigments | Bayferrox® 130M is a synthetic iron oxide-alpha with the color index name Pigment Red 101 (PR101). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 140M | LANXESS Inorganic Pigments | Bayferrox® 140M is a synthetic iron oxide-alpha with the color index name Pigment Red 101 (PR101). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 160M | LANXESS Inorganic Pigments | Bayferrox® 160M is a synthetic iron oxide-alpha with the color index name Pigment Red 101 (PR101). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 3420 | LANXESS Inorganic Pigments | Bayferrox® 3420 is a synthetic iron oxide-alpha with the color index name Pigment Yellow 42 (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 3910 | LANXESS Inorganic Pigments | Bayferrox® 3910 is a synthetic iron oxide-alpha with the color index name Pigment Yellow 42 (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 3920 | LANXESS Inorganic Pigments | Bayferrox® 3920 is a synthetic iron oxide-alpha with the color index name Pigment Yellow 42 (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 645 T | LANXESS Inorganic Pigments | Bayferrox® 645 T is a synthetic mixed iron and manganese oxide with the color index Pigment Brown (PBr43). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Chrome Oxide Green GX | LANXESS Inorganic Pigments | Chrome Oxide Green GX is a chromium oxide powder with the color index name Pigment Green 17 (PG17). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 504 | LANXESS Inorganic Pigments | Bayferrox® 504 is a red synthetic iron oxide with the color index name Pigment Red 101 (77491). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 510 | LANXESS Inorganic Pigments | Bayferrox® 510 is a red synthetic iron oxide with the color index name Pigment Red 101 (77491). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 520 | LANXESS Inorganic Pigments | Bayferrox® 520 is a red synthetic iron oxide with the color index name Pigment Red 101 (77491). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 525 | LANXESS Inorganic Pigments | Bayferrox® 525 is a red synthetic iron oxide with the color index name Pigment Red 101 (77491). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 530 | LANXESS Inorganic Pigments | Bayferrox® 530 is a red synthetic iron oxide with the color index name Pigment Red 101 (77491). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| COLORTHERM® Yellow 3950 | LANXESS Inorganic Pigments | COLORTHERM® Yellow 3950 is a synthetic zinc ferrite powder with the color index name Pigment Yellow 119 (PY119). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab unit...view more COLORTHERM® Yellow 3950 is a synthetic zinc ferrite powder with the color index name Pigment Yellow 119 (PY119). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. view less | |
| COLORTHERM® Yellow 30 | LANXESS Inorganic Pigments | COLORTHERM® Yellow 30 is a synthetic zinc ferrite powder with the color index name Pigment Yellow 119 (PY119). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. | |
| Bayferrox® 303 T | LANXESS Inorganic Pigments | Bayferrox® 303 T is a synthetic mixed iron and manganese oxide with the color index name Pigment Black 33 (PBk33). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab unit...view more Bayferrox® 303 T is a synthetic mixed iron and manganese oxide with the color index name Pigment Black 33 (PBk33). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. view less | |
| Chrome Oxide Green GN-M | LANXESS Inorganic Pigments | Chrome Oxide Green GN-M is a synthetic chromium oxide powder with the color index name Pigmented Green 17 (PG17). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab unit...view more Chrome Oxide Green GN-M is a synthetic chromium oxide powder with the color index name Pigmented Green 17 (PG17). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. view less | |
| JEFFAMINE® T-403 Polyoxypropylenetriamine | Huntsman Performance Products | JEFFAMINE® T-403 Polyoxypropylenetriamine is characterized by repeating oxypropylene units in the backbone. As shown by the structure, this product is a trifunctional primary amine having an average molecular weight of approximately 440. Its amine groups ...view more JEFFAMINE® T-403 Polyoxypropylenetriamine is characterized by repeating oxypropylene units in the backbone. As shown by the structure, this product is a trifunctional primary amine having an average molecular weight of approximately 440. Its amine groups are located on secondary carbon atoms at the ends of aliphatic polyether chains. view less | |
| COLORTHERM® Yellow 10 | LANXESS Inorganic Pigments | COLORTHERM® Yellow 10 is a synthetic iron oxide-alpha powder post-treated with Al-compounds with the color index name Pigmented Yellow 42 (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab unit...view more COLORTHERM® Yellow 10 is a synthetic iron oxide-alpha powder post-treated with Al-compounds with the color index name Pigmented Yellow 42 (PY42). Specified values of this product are determined to LANXESS internal quality control procedures. The color readings are reported in CIELab units. view less | |
| ADDITOL® WT 103 DF-S | Allnex | ADDITOL® WT 103 DF-S is a water and waste water treatment defoamer. Modified silicone / silica defoamer emulsion (25% active). Emulsifier free technology. For sophisticated & special treatments (zero liquid discharge plants, distillation & evaporation unit...view more ADDITOL® WT 103 DF-S is a water and waste water treatment defoamer. Modified silicone / silica defoamer emulsion (25% active). Emulsifier free technology. For sophisticated & special treatments (zero liquid discharge plants, distillation & evaporation units, membrane reactors). Highly effective at low dosages. view less | Request Sample |
| AnTec MM | Anpeak Specialty Minerals Co., Ltd. | AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies...view more AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies between 2.5 and 2.7, and it contains less than .5% free moisture. view less | |
| MERGAL® CM 1.5 | Arxada – Troy Corporation | MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra filtrations unit...view more MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra filtrations units. It is suitable for systems with a pH of 3 - 9. view less | Request Sample |
| D-400 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether ...view more D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether Amine acts as a curing agent which provides flexibility and toughness in adhesives. view less | |
| Digital KU-2 | BYK-Gardner USA | The Digital KU-2 viscometer provides a direct digital reading in Krebs units (KU), centipoise, and grams (gm). This simplifies an established test procedure providing an immediate calculation of the viscosity value. The viscometer automatically starts or ...view more The Digital KU-2 viscometer provides a direct digital reading in Krebs units (KU), centipoise, and grams (gm). This simplifies an established test procedure providing an immediate calculation of the viscosity value. The viscometer automatically starts or stops by lowering or raising the viscometer. The KU-2 automatically establishes the correct rotational speed to comply with ASTM method D 562. view less |  |
| PMD / PMD-VC Intensive Mixers | NETZSCH Grinding & Dispersing | The PMD and PMD-VC intensive mixers are stationary mixing and dispersing units for processing large batches. Separation of the mixing and dispersing operations provides for an extremely energy-efficient process that is especially useful for batches over 2...view more The PMD and PMD-VC intensive mixers are stationary mixing and dispersing units for processing large batches. Separation of the mixing and dispersing operations provides for an extremely energy-efficient process that is especially useful for batches over 2000 l. The compact enclosed design of the intensive mixer allows for integration into fully-automatic plants and prevents contamination from gases and dust. view less |  |
| Polyether Amine MA 223 | DKSH | Polyether Amine MA 223 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 223 is about 230. Polyether amine MA 223 is a clear liquid with amine-like odor. It is i...view more Polyether Amine MA 223 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 223 is about 230. Polyether amine MA 223 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents, adhesives and surfactants. This product is available in Europe and North America. view less | Request Sample |
| Polyether Amine MA 240 | DKSH | Polyether Amine MA 240 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 240 is about 430. Polyether amine MA 240 is a clear liquid with amine-like odor. It is i...view more Polyether Amine MA 240 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 240 is about 430. Polyether amine MA 240 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents, adhesives and surfactants. This product is available in Europe and North America. view less | Request Sample |
| Polyether Amine MA 2200 | DKSH | Polyether Amine MA 2200 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 2200 is about 2000. Polyether amine MA 2200 is a clear liquid with amine-like odor. It ...view more Polyether Amine MA 2200 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of Polyether amine MA 2200 is about 2000. Polyether amine MA 2200 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents and polyurea. This product is available in Europe and North America. view less | Request Sample |
| CRYLCOAT® 2693-6 | Allnex | CRYLCOAT® 2693-6 is a low bake tribo active Primid® polyester resin for matte dry blend systems in a ratio of 93/7. In combination with CRYLCOAT® 2668-6 powder coatings with 60° gloss between 25 and 30 gloss units can be formulated. Full cure can be achie...view more CRYLCOAT® 2693-6 is a low bake tribo active Primid® polyester resin for matte dry blend systems in a ratio of 93/7. In combination with CRYLCOAT® 2668-6 powder coatings with 60° gloss between 25 and 30 gloss units can be formulated. Full cure can be achieved at 12 min x 160°C schedule. view less | Request Sample |
| Luna-mer 2165 | DKSH | Luna-mer 2165 is a matting agent for polyester epoxy hybrid powder coatings and can be used to produce coatings that have a 60° gloss range between 15–70 units. Cured films that contain Luna-mer 2165 offer excellent flow, outstanding anti-yellowing proper...view more Luna-mer 2165 is a matting agent for polyester epoxy hybrid powder coatings and can be used to produce coatings that have a 60° gloss range between 15–70 units. Cured films that contain Luna-mer 2165 offer excellent flow, outstanding anti-yellowing properties and very good finger-print resistance. This product is available in Europe, Asia and North America. view less | Request Sample |
| CRYLCOAT® 2668-6 | Allnex | CRYLCOAT® 2668-6 is a low bake tribo active carboxyl functional Primid® polyester resin in ratio of 97/3 for matte dry- blend systems. In combination with CRYLCOAT® 2693-6, powder coatings with 60° gloss between 25 and 30 gloss units can be formulated; fu...view more CRYLCOAT® 2668-6 is a low bake tribo active carboxyl functional Primid® polyester resin in ratio of 97/3 for matte dry- blend systems. In combination with CRYLCOAT® 2693-6, powder coatings with 60° gloss between 25 and 30 gloss units can be formulated; full cure can be achieved at 12 min x 160°C schedule. view less | Request Sample |
| Laboratory De-Aerator Minivac | NETZSCH Grinding & Dispersing | The specially developed machine for small batches or first tests, like the NETZSCH-Vacuum De-Aerator, works according to the VTR principle (Vacuum Thin layer Rotation Procedure).The MiniVac stands out with its easy operation. The ease of working with the ...view more The specially developed machine for small batches or first tests, like the NETZSCH-Vacuum De-Aerator, works according to the VTR principle (Vacuum Thin layer Rotation Procedure).The MiniVac stands out with its easy operation. The ease of working with the machine is facilitated by the adjustment of the tank position. Further advantages of the vacuum de-aerator are easy cleaning and maintenance. view less |  |
| Vacuum De-Aerator DA/DA-VS | NETZSCH Grinding & Dispersing | In the NETZSCH Vacuum De-aerator, micronized gases are removed from fluids with a wide range of viscosities. By means of the VTR Principle (vacuum – thin-film – rotary process), it is possible to process products from for example offset ink and shampoo to...view more In the NETZSCH Vacuum De-aerator, micronized gases are removed from fluids with a wide range of viscosities. By means of the VTR Principle (vacuum – thin-film – rotary process), it is possible to process products from for example offset ink and shampoo to a wide variety of free-flowing compounds. view less |  |
| Stain Resistant Flat Paint and Primer In One (Formulation #4750-001) | BASF Dispersions & Resins | ACRONAL® EDGE 4750 is a high perfor- mance all acrylic latex designed for interior and exterior flat to semi-gloss paints. ACRONAL EDGE 4750 provides the foundation for premium performance with versatile formulation latitude. This latex unites the require...view more ACRONAL® EDGE 4750 is a high perfor- mance all acrylic latex designed for interior and exterior flat to semi-gloss paints. ACRONAL EDGE 4750 provides the foundation for premium performance with versatile formulation latitude. This latex unites the requirements of a primer and top coat, trapping existing stains through a combination of fast film formation and high opacity. ACRONAL EDGE 4750 further enhances a coating’s durability by providing superior stain resistance. view less | |
| COATOSIL* RESIN P 501 | Momentive | CoatOSil Resin P 501 is a medium-hard phenylmethyl silicone resin in solvent that can be used as a binder for anticorrosion coatings with thermal stability up to 600C. The main fields of application are the coating of machine components, fire doors, engine manifolds, car exhaust silencers, drying unit...view more CoatOSil Resin P 501 is a medium-hard phenylmethyl silicone resin in solvent that can be used as a binder for anticorrosion coatings with thermal stability up to 600C. The main fields of application are the coating of machine components, fire doors, engine manifolds, car exhaust silencers, drying units etc. These commonly use one-coat finishes. Systems of this kind are also applied for sealing spray-metallized surfaces. CoatOSil P 501 Resin can also be used for multi-coat finishing systems for industrial plant. view less | |
| Double Planetary Mixer | Charles Ross & Son Company | Ross pioneered the Double Planetary Mixer design more than 60 years ago. Design updates make this mixer suitable for use in applications up to 7,000,000 centipoise. A high speed design variation is also available. |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon Blenders are ideal for powder blending applications. The dual action ribbon agitator creates an intimate blend in a short cycle time. Ross stocks Ribbon Blenders in many sizes from 1 - 100 cu.ft. working capacity. |  |
| Vertical Blender | Charles Ross & Son Company | Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blendin...view more Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blending action of the slow-turning blending screw is far more gentle than the agitators in a Ribbon Blender of the same working volume. view less |  |
| Planetary Dispersers | Charles Ross & Son Company | The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials ...view more The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials directly into the high shear zone of the orbiting high speed disperser. This combination of unique mixing actions eliminate the need for multiple mixers i.e. 2 technologies in one machine. view less |  |
| EXAKT 80 E | EXAKT Technologies Inc. | EXAKT 80 E is a three roll mill with 0.02-20 throughput liters/hour. The Three Roll Mill Electronic models were specifically designed for manufacturers who need extraordinary precision and control of particle dispersion in small quantities. In applications that range from color blending in printing inks and cosmetics to nano-particle dispersion for electronics, these unit...view more EXAKT 80 E is a three roll mill with 0.02-20 throughput liters/hour. The Three Roll Mill Electronic models were specifically designed for manufacturers who need extraordinary precision and control of particle dispersion in small quantities. In applications that range from color blending in printing inks and cosmetics to nano-particle dispersion for electronics, these units provides a means of achieving extremely precise particle size reduction/dispersion in a remarkably reproducible format. The Electronic models are great for product development, pilot plant projects, and small production runs. view less | |
| EXAKT 120 EH - 250 | EXAKT Technologies Inc. | EXAKT 120 EH - 250 is a three roll mill with 0.5-30 throughput liters/hour. The Three Roll Mill Electronic models were specifically designed for manufacturers who need extraordinary precision and control of particle dispersion in small quantities. In applications that range from color blending in printing inks and cosmetics to nano-particle dispersion for electronics, these unit...view more EXAKT 120 EH - 250 is a three roll mill with 0.5-30 throughput liters/hour. The Three Roll Mill Electronic models were specifically designed for manufacturers who need extraordinary precision and control of particle dispersion in small quantities. In applications that range from color blending in printing inks and cosmetics to nano-particle dispersion for electronics, these units provides a means of achieving extremely precise particle size reduction/dispersion in a remarkably reproducible format. The Electronic models are great for product development, pilot plant projects, and small production runs. view less | |
| EXAKT 120 EH - 450 | EXAKT Technologies Inc. | EXAKT 120 EH - 450 is a three roll mill with 1-60 throughput liters/hour. The Three Roll Mill Electronic models were specifically designed for manufacturers who need extraordinary precision and control of particle dispersion in small quantities. In applications that range from color blending in printing inks and cosmetics to nano-particle dispersion for electronics, these unit...view more EXAKT 120 EH - 450 is a three roll mill with 1-60 throughput liters/hour. The Three Roll Mill Electronic models were specifically designed for manufacturers who need extraordinary precision and control of particle dispersion in small quantities. In applications that range from color blending in printing inks and cosmetics to nano-particle dispersion for electronics, these units provides a means of achieving extremely precise particle size reduction/dispersion in a remarkably reproducible format. The Electronic models are great for product development, pilot plant projects, and small production runs. view less | |
| Multi-Shaft Mixer | Charles Ross & Son Company | We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion an...view more We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion and mixing applications. view less |  |
| High Speed Disperser | Charles Ross & Son Company | Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic ...view more Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic lift system with hand/foot controls; and stainless steel wetted parts and shaft guard. Sizes range from 1/2 HP to 200 HP to handle batches from 1 to 2000 gallons. Custom designs are also available. view less |  |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...view more Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). view less | |
| Bisomer® S20 W | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® S20 W is an aqueous solution of a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 45 EO units within the chain. This product has a water content of 48-52%, an inhibitor (MEHQ) ...view more Bisomer® S20 W is an aqueous solution of a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 45 EO units within the chain. This product has a water content of 48-52%, an inhibitor (MEHQ) content of 0.22-0.28%, and an acidity - methacrylic acid of 0.1% max. Bisomer® S20 W is an excellent material to impart water solubility or water dispersibility within non-ionic organic molecules. Due to its low Glass Transition Temperature (Tg), it is also an excellent flexibilising molecule. It is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). This product is non-toxic and supplied as a 50% active solution in water as the undiluted product is a wax-like solid. view less | |
| Bisomer® S10 W | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® S10 W (50% aqueous solution of Methoxy Polyethyleneglycol 1000 Methacrylate) is an aqueous solution of a long chain methacrylate monoester based on a poly-ethyleneglycol backbone. This product has a saponification value of 23-28mg KOH/g, a molecular weight of 1080g/mol, and an water content of 49-51%. It is water soluble and contains approximately 23 EO unit...view more Bisomer® S10 W (50% aqueous solution of Methoxy Polyethyleneglycol 1000 Methacrylate) is an aqueous solution of a long chain methacrylate monoester based on a poly-ethyleneglycol backbone. This product has a saponification value of 23-28mg KOH/g, a molecular weight of 1080g/mol, and an water content of 49-51%. It is water soluble and contains approximately 23 EO units within the chain. Bisomer® S10 W is an excellent material to impart water solubility or water dispersibility within non-ionic organic molecules. Due to its low Glass Transition Temperature (Tg), it is also an excellent flexibilising molecule. It is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). This product is non-toxic and supplied as a 50% active solution in water as the undiluted product is a wax -like solid. view less |
