UL Prospector

Success!

Successfully saved your search
1265 Results
UV-Curing Clear Coat for Wood (Formulation #I 45411.2 [5]) Hoffmann Mineral UV-Curing Clear Coat for Wood (Formulation #I 45411.2 [5]) featuring AKTISIL MAM.
NANOPOX® C 620 Evonik Operations GmbH, BL Coating Additives NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. Request Sample
NANOCRYL® C 153-10 Evonik Operations GmbH, BL Coating Additives NANOCRYL® C 153-10 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured UV-coating. Request Sample
S-381-N5 (Carnauba / Synthetic Wax Blend) Shamrock Technologies, Inc. S-381-N5 is a carnauba and synthetic micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommened for powder, water-based and UV coating systems.
UV-Curing Clear Coat for Wood, Matte Roller Application with Balanced Properties (Formulation #RR 6695) Hoffmann Mineral UV-Curing Clear Coat for Wood, Matte Roller Application with Balanced Properties (Formulation #RR 6695) featuring SILLITIN V 85.
S-381-N1 (Carnauba / Synthetic Wax Alloy) Shamrock Technologies, Inc. S-381-N1 is a carnauba and synthetic micronized wax alloy that has a uniform melting range peaking at 91°C. S-381-N1 is also recommened for powder, water-based and UV coating systems.
GR-ITX Hubei Gurun Technology Co., Ltd. GR-ITX is a yellowish powder and photoinitiator that contains quick photocuring and photoinitiating. This product is for use in clear and colorful UV coating or ink, offset inks, screen inks, flexo inks and inkjet inks.
SFA-480 DKSH SFA-480 is designed for anti graffiti coating materials on UV curing coating system. It can be applicable to special coating which is required anti graffiti. Request Sample
GR-PS-1 Hubei Gurun Technology Co., Ltd. GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative pho...view more GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative photoresist and other sensitive material. view less
LC-L5 G (UV-LED Light Source) Hamamatsu Corporation A linear irradiation type UV-LED unit, the LC-L5 G has high output (10,000 mW/cm^2), air cooling by fan, and a compact and light weight. It is recommended for UV ink drying, UV coating agent drying, and for fluorescence excitation/scratch & flaw inspectio...view more A linear irradiation type UV-LED unit, the LC-L5 G has high output (10,000 mW/cm^2), air cooling by fan, and a compact and light weight. It is recommended for UV ink drying, UV coating agent drying, and for fluorescence excitation/scratch & flaw inspection lighting. view less
PLACCEL 205U Daicel (U.S.A.), Inc. PLACCEL 205U is polycaprolactone diol and its molecular weight is 530. It is characterized by its narrow molecular weight distribution and low acid value. In addition, PLACCEL 205U is liquid-state oligomer. Urethane acrylates made from PLACCEL 205U show low viscosity and low crystallinity. Therefore, these are used for various base materials such as UV coating, UV binder, UV adhesive, and UV ...view more PLACCEL 205U is polycaprolactone diol and its molecular weight is 530. It is characterized by its narrow molecular weight distribution and low acid value. In addition, PLACCEL 205U is liquid-state oligomer. Urethane acrylates made from PLACCEL 205U show low viscosity and low crystallinity. Therefore, these are used for various base materials such as UV coating, UV binder, UV adhesive, and UV ink etc., and also give these materials high flexibility and good hydrolysis resistance view less
PLACCEL 205UC Daicel (U.S.A.), Inc. PLACCEL 205UC was developed for synthesizing urethane acrylate oligomers. PLACCEL 205UC is characterized for its narrow molecular weight distribution and its low acid value. Urethane acrylates made from PLACCEL 205UC show low viscosity and low crystalline when compared to adipate polyesters. And the coat which be curing by ultraviolet(UV) or electron beam(EB) shows high flexibility, good hydrolysis resistance and weathering resistance. The recommended applications of these urethane acrylate oligomers are UV coating, UV binder, and UV adhesives, UV ...view more PLACCEL 205UC was developed for synthesizing urethane acrylate oligomers. PLACCEL 205UC is characterized for its narrow molecular weight distribution and its low acid value. Urethane acrylates made from PLACCEL 205UC show low viscosity and low crystalline when compared to adipate polyesters. And the coat which be curing by ultraviolet(UV) or electron beam(EB) shows high flexibility, good hydrolysis resistance and weathering resistance. The recommended applications of these urethane acrylate oligomers are UV coating, UV binder, and UV adhesives, UV ink, etc. to various base materials. view less
GR-FMT Hubei Gurun Technology Co., Ltd. GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV c...view more GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV coating, printing ink and adhesive. view less
SST®-5D (PTFE Micropowder) Shamrock Technologies, Inc. SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and UV coating...view more SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and UV coating systems. view less
ACEMATT® 3600 Evonik Operations GmbH, BL Coating Additives ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low th...view more ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low thickening effect and high chemical resistance. It is particularly suitable for use in very thin or very thick UV-coatingview less Request Sample
Hostatint® UV Blue BG - Pigment Blue 15:3 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Blue BG is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexand...view more Hostatint® UV Blue BG is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photo initiator. view less Request Sample
Hostatint® UV Yellow H3G - Pigment Yellow 154 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Yellow H3G is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexan...view more Hostatint® UV Yellow H3G is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guaran- tee optimal rheological behavior and curing. The preparations do not contain any photoinitiator. view less Request Sample
Hostatint® UV Trans Oxide Red 2B - Pigment Red 101 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Trans Oxide Red 2B is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDD...view more Hostatint® UV Trans Oxide Red 2B is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photoinitiator. view less Request Sample
Hostatint® UV White R - Pigment White 6 Clariant Plastics and Coatings (Dispersions) Hostatint® UV White R is part of a range of pigment preparations for 100 % UV-coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol...view more Hostatint® UV White R is part of a range of pigment preparations for 100 % UV-coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photoinitiator. view less Request Sample
Hostatint® UV Red D3GD - Pigment Red 254 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Red D3GD is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexan...view more Hostatint® UV Red D3GD is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guaran- tee optimal rheological behavior and curing. The preparations do not contain any photo initiator. view less Request Sample
CERETAN MPS 3120 Munzing Chemie CERETAN MPS 3120 is a white fine powder that is a micronized polypropylene wax, coated with silica. It has matting effects, high transparency, scratch and heat resistance and is a slip agent. It is commonly used in paints and coatings, such as industrial ...view more CERETAN MPS 3120 is a white fine powder that is a micronized polypropylene wax, coated with silica. It has matting effects, high transparency, scratch and heat resistance and is a slip agent. It is commonly used in paints and coatings, such as industrial paints, wood coatings, overprint, varnishes and UV-coating systems. view less
Epokukdo KDU-657TH70 Kukdo Chemical Co., Ltd. Epokukdo KDU-657TH70 diluted with 15wt.% each TMPTA, 2-HEMA monomer is a UV curable acrylate epoxy oligomer of bisphenol-A/phenol novolac type. KDU-657TH70 has good adhesion and outstanding chemical resistance. KDU-657TH70 is generally used for polyester ...view more Epokukdo KDU-657TH70 diluted with 15wt.% each TMPTA, 2-HEMA monomer is a UV curable acrylate epoxy oligomer of bisphenol-A/phenol novolac type. KDU-657TH70 has good adhesion and outstanding chemical resistance. KDU-657TH70 is generally used for polyester film UV coating and P.C.B. Ink because of its good electric properties and excellent chemical resistance. Curing-speed and viscosity of KDU-657TH70 depend on diluents, photo initiators and additives. view less
Hostatint® UV Black N - Pigment 7 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Black N is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexand...view more Hostatint® UV Black N is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guaran- tee optimal rheological behavior and curing. The preparations do not contain any photoinitiator. view less Request Sample
Hostatint® UV Transoxide Yellow 2R - Pigment Yellow 42 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Transoxide Yellow 2R is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain H...view more Hostatint® UV Transoxide Yellow 2R is part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photoinitiator. view less Request Sample
Hostatint® UV Oxide Yellow BV - Pigment Yellow 184 Clariant Plastics and Coatings (Dispersions) Hostatint® UV Oxide Yellow BV is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA...view more Hostatint® UV Oxide Yellow BV is a part of a range of pigment preparations for 100 % UV- coating systems. The back bone of the formulation is modified unsaturated acrylate that shows wide compatibility with UV-curable paints. The preparations contain HDDA (Hexandiol diacrylate) and TMPEOTA (Ethoxylated trimethylolpropane triacrylate) to guarantee optimal rheological behavior and curing. The preparations do not contain any photo initiator. view less Request Sample
Doublecure® BMS Double Bond Chemical Ind., Co., Ltd. Doublecure® BMS is a highly efficient photoinitiator which is used, normally in combination with a photoactivator such as Doublecure® EPD in the formulation of coating cured by UV radiation. Its white color appearance and strong absorption in UVB region m...view more Doublecure® BMS is a highly efficient photoinitiator which is used, normally in combination with a photoactivator such as Doublecure® EPD in the formulation of coating cured by UV radiation. Its white color appearance and strong absorption in UVB region make it suitable for white or pigmented UV coating. Low odor and good solubility in monomer are two advantages over other sensitizers bearing the same absorption pattern. This product appears as a silver white crystal with a very faint odor. view less
DOWSIL™ 8526 Additive Dow Performance Silicones DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent i...view more DOWSIL™ 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coatingview less
SR217 Sartomer Americas SR217 is a low viscosity aliphatic monofunctional monomer for use in UV/EB coating and ink formulations. SR217 improves adhesion to plastics, metals, and other difficult substrates.
Siltech® C-4100 Siltech Corp. Siltech® C-4100 is a 100% active proprietary formulated modified polydimethyl siloxane anti-foam and de-foamer in water-based, solvent-based, solvent-less, and UV/EB coating systems.
Doublecure® 2-ITX Double Bond Chemical Ind., Co., Ltd. Doublecure® 2-ITX is an ideal photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivators such as Doublecure® EPD should yield satisfying results for most of UV applications. The usage rates vary according to the compos...view more Doublecure® 2-ITX is an ideal photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivators such as Doublecure® EPD should yield satisfying results for most of UV applications. The usage rates vary according to the composition of the system, source of light, line speed, and film thickness but usually lie between 0.25 % to 3 % w/w together with photoactivators at 2 - 5 % w/w. Applications include printing ink, decorative coating for metal cans, solder mask, and pressure sensitive sheet. view less
INT A81 UV Intech Synthetic Materials INT A81 UV posses a unique function of preventing the polymerization reaction among monomers in UV-curable coatings and printing ink systems, which results in a desirable gel-resistance.As a synthetic resin, INT A81 UV is the condensation of urea and alip...view more INT A81 UV posses a unique function of preventing the polymerization reaction among monomers in UV-curable coatings and printing ink systems, which results in a desirable gel-resistance.As a synthetic resin, INT A81 UV is the condensation of urea and aliphatic aldehydes, colorlessly crystal or slightly yellow, soluble in most paint solvents except water and widely compatible with coating raw materials.it is inactive in chemistry and doesn't take part in UV-curing reaction,but when used for UV coating and ink's production,it performs satisfctorily to help film forming process thanks to its low viscosity. view less
CN2921 Sartomer Americas CN2921 is an aliphatic urethane acrylate oligomer developed for UV curable coating and ink applications where adhesion and excellent weathering resistance are required. CN2921 adheres to plastics and polycarbonates and has good flexibility.
NANOARC® ZN-2660 Nanophase Technologies A 30 wt% dispersion of 60 nm Zinc Oxide in Tripropylene Glycol Diacrylate. Improves UV resistance in UV/EB curable coating formulations.
Doublecure® DETX Double Bond Chemical Ind., Co., Ltd. Doublecure® DETX is the most widely used photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This product is a pale yellow powder...view more Doublecure® DETX is the most widely used photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This product is a pale yellow powder with a very faint odor. The usage rates vary according to the composition of the system, source of light, line speed, and film thickness but usually lie between 0.25 % to 3 % w/w together with photoactivators at 2 - 5 % w/w. view less
Doublecure® ITX Double Bond Chemical Ind., Co., Ltd. Doublecure® ITX is a photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This pale yellow powder is used to enhance curing proper...view more Doublecure® ITX is a photosensitizer for pigmented UV coating systems. Its use in combination with a photoactivator such as Doublecure® EPD should give satisfied results for most of UV applications. This pale yellow powder is used to enhance curing properties. The usage rates vary according to the composition of the system, source of light, line speed, and film thickness but usually lie between 0.25 % to 3 % w/w together with photoactivators at 2 - 5 % w/w. Applications include printing ink, decorative coating for metal cans, solder mask, and pressure sensitive sheet. view less
Doublecure® 550 Double Bond Chemical Ind., Co., Ltd. Doublecure® 550 is a liquid mixture of two photoinitiators, Doublecure® 184 and Doublecure® BP. It is used to initiate the photo polymerization of chemically oligomers e.g. a variety of acrylates, in combination with mono- or multifunctional monomers. The liquid nature of this product makes it an ideal choice for clear coatings on paper, flooring, metal, plastics, woods and especially in water-based UV coating...view more Doublecure® 550 is a liquid mixture of two photoinitiators, Doublecure® 184 and Doublecure® BP. It is used to initiate the photo polymerization of chemically oligomers e.g. a variety of acrylates, in combination with mono- or multifunctional monomers. The liquid nature of this product makes it an ideal choice for clear coatings on paper, flooring, metal, plastics, woods and especially in water-based UV coating systems. This product is a light yellow liquid with a very faint odor. view less
NANOARC® AL-2260 Nanophase Technologies A 30 wt% dispersion of 20 nm Aluminum Oxide in Tripropylene Glycol Diacrylate. Improves scratch resistance in UV/EB curable coating formulations.
NANOARC® AL-2360 Nanophase Technologies A 55 wt% dispersion of 250 nm Aluminum Oxide in Tripropylene Glycol Diacrylate. Improves scratch resistance in UV/EB curable coating formulations.
NANOARC® AL-2460 Nanophase Technologies A 30 wt% dispersion of 40 nm Aluminum Oxide in Tripropylene Glycol Diacrylate. Improves scratch resistance in UV/EB curable coating formulations.
NANOARC® AL-2160 Nanophase Technologies A 45 wt% dispersion of 150 nm Aluminum Oxide in Tripropylene Glycol Diacrylate. Improves scratch resistance in UV/EB curable coating formulations.
NANOARC® AL-2860 Nanophase Technologies A 55 wt% dispersion of 800 nm Aluminum Oxide in Tripropylene Glycol Diacrylate. Improves scratch resistance in UV/EB curable coating formulations.
Doublecure® EMK Double Bond Chemical Ind., Co., Ltd. Doublecure® EMK is both an aromatic ketone and a tertiary amine. It could act both as a photosensitizer and an amine synergist and would be expected to be an independent complete initiating system. Doublecure® EMK has a strong absorption between 350 to 400 nm which makes it most suitable for pigmented and black UV coating...view more Doublecure® EMK is both an aromatic ketone and a tertiary amine. It could act both as a photosensitizer and an amine synergist and would be expected to be an independent complete initiating system. Doublecure® EMK has a strong absorption between 350 to 400 nm which makes it most suitable for pigmented and black UV coating. This product is is a photo-grade EMK which bears bright yellow color and is more resistant to oxidation by exposure in air than the most commercially available EMK. view less
V-Pyrol™ Ashland V-Pyrol™ is a clear, stable liquid used as a reactive diluent for radical initiated UV radiation curing, in numerous conventional polymerizations and as a formulated UV radiation curable coating. Request Sample
Dynoadd® F-409 Dynoadd by Dynea Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive si...view more Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive significantly reduces orange peel and improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-409 has applications in general industry and wood coatings. The additive is compatible with most solvent-borne and solvent-free radiation curing systems independent of oligomer chemistry. view less Request Sample
Dynoadd® F-712 Dynoadd by Dynea Dynoadd® F-712 is a non-silicone polymeric air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing pinholes and microfoam. The additive has little or no influence on film clarity. Dynoadd® F-712 may contribute positively to flow. The product is diluted in 2-ethylhexyl acrylate to ease incorporation and ensure optimum dispersion in radiation curable formulations. Dynoadd® F-712 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent UV coating...view more Dynoadd® F-712 is a non-silicone polymeric air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing pinholes and microfoam. The additive has little or no influence on film clarity. Dynoadd® F-712 may contribute positively to flow. The product is diluted in 2-ethylhexyl acrylate to ease incorporation and ensure optimum dispersion in radiation curable formulations. Dynoadd® F-712 has applications in UV coatings. The additive is compatible with most solvent-borne and non-solvent UV coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less Request Sample
XOANONS® WE-D887R Anhui Xoanons Chemical Co., Ltd. XOANONS® WE-D887R is a fluorocarbon modified polyacrylate copolymer solution. It offers excellent defoaming and foam-inhibition. This product provides long-wave leveling and prevent anti-orange-peel. Most of the applications are for coil and roll coating ...view more XOANONS® WE-D887R is a fluorocarbon modified polyacrylate copolymer solution. It offers excellent defoaming and foam-inhibition. This product provides long-wave leveling and prevent anti-orange-peel. Most of the applications are for coil and roll coating and epoxy floor paints. Not suitable for varnish and UV cure coatingview less
Vermiculite PL-20 Micronized Products Vermiculite PL-20 is a laminar-structured blend of potassium, aluminium, and iron silicates. This product is most commonly used to enhance protection, inertness, and UV stability in coating applications.
Lansperse UV10B P.A.T. Products Lansperse UV10B is a high molecular weight polymeric dispersing agent for pigmented UV cured coating formulations. It is particularly effective in blacks, reds, and blues. The blue will require the use of a synergist and we recommend using Lansperse SYN50...view more Lansperse UV10B is a high molecular weight polymeric dispersing agent for pigmented UV cured coating formulations. It is particularly effective in blacks, reds, and blues. The blue will require the use of a synergist and we recommend using Lansperse SYN50. Lansperse UV10B is a solid 100% active material. view less Request Sample
DOWSIL™ 8621 Additive Dow Performance Silicones DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less
DOWSIL™ 8628 Additive Dow Performance Silicones DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low tempera...view more DOWSIL™ 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. view less
SILCOLEASE UV ADD 280 RED Elkem Silicones SILCOLEASE UV ADD 280 RED is an epoxy silicone color concentrate. It is used with SILCOLEASE cationic UV radiation cured release coating systems to tint the cured release coating.
UVECOAT® 9146 Allnex UVECOAT® 9146 is an aliphatic unsaturated acrylic urethane polymer for use as a crosslinker with UVECOAT® resins in UV curable powder coatings. Use of UVECOAT® 9146 in a UV curable powder coating will enhance reactivity and improve surface hardness. Request Sample
SILCOLEASE UV ADD 280 BLUE Elkem Silicones ​SILCOLEASE UV ADD 280 BLUE is an epoxy based silicone colorant. It is used with SILCOLEASE cationic UV radiation cured release coating systems to tint the cured release coating.
IRGASTAB® UV 22 BASF Dispersions & Resins IRGASTAB UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. It is highly miscible in acrylate monomers and oligomers. Request Sample
NANOARC® ZN-2250 Nanophase Technologies A 40 wt% dispersion of 20 nm Zinc Oxide in Water. Improves UV resistance in water-borne coating formulations.
DOUBLEMER® PETA Double Bond Chemical Ind., Co., Ltd. DOUBLEMER® PETA is a multifunctional monomer which contains a mixture of tri-and tetra-acrylate. It can be used in a variety of UV curable coating where a high degree of crosslinking is requested. This product is an especially useful monomer where fast cu...view more DOUBLEMER® PETA is a multifunctional monomer which contains a mixture of tri-and tetra-acrylate. It can be used in a variety of UV curable coating where a high degree of crosslinking is requested. This product is an especially useful monomer where fast cure speed, hardness and high gloss properties are required. It can also be applied in UV/EB coatings and ink systems. view less
CN2003B Sartomer Americas CN2003B is a modified epoxy acrylate oligomer that imparts flexibility, excellent adhesion, and low shrinkage to UV/EB curable coating, ink, and adhesive applications. CN2003B can be used on a variety of substrates, including plastics, metals, and w...view more CN2003B is a modified epoxy acrylate oligomer that imparts flexibility, excellent adhesion, and low shrinkage to UV/EB curable coating, ink, and adhesive applications. CN2003B can be used on a variety of substrates, including plastics, metals, and wood.  view less
NANOARC® ZN-2656 PRODUCT Nanophase Technologies A 50 wt% dispersion of 60 nm Zinc Oxide in Water. Improves UV resistance in water-borne coating formulations.
NANOARC® ZN-2456 Nanophase Technologies A 40 wt% dispersion of 40 nm Zinc Oxide in Water. Improves UV resistance in water-borne coating formulations.
CN UVE 151 Sartomer Americas CN UVE 151 is an epoxy acrylate oligomer that imparts flexibility, excellent adhesion, and low shrinkage to UV/EB curable coating, ink and adhesive applications. CN UVE 151 can be used on a variety of substrates, including plastics, metals, and wood.
UV Cure 60-7159 Epoxies, Etc. UV Cure 60-7159 is a low viscosity conformal coating for Printed Circuit Boards (PCB’s), components and various substrates. When exposed to long wave UV it forms a tough, clear and flexible coating. UV Cure 60-7159 resists yellowing, vibration and impact....view more UV Cure 60-7159 is a low viscosity conformal coating for Printed Circuit Boards (PCB’s), components and various substrates. When exposed to long wave UV it forms a tough, clear and flexible coating. UV Cure 60-7159 resists yellowing, vibration and impact. UV Cure 7159 does not contain any solvents and forms a smooth, non-sticky surface. view less
HSADA-42 PCI Group, Inc. HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orang...view more HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orange peel. HSADA-42 is active throughout the curing process and demonstrates significantly less foam development than many other fluorosurfactants. view less
Epokukdo KDU-653 Kukdo Chemical Co., Ltd. Epokukdo KDU-653 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653 is ge...view more Epokukdo KDU-653 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-653 depend on diluents, photo initiators, and additives. view less
Epokukdo KDU-651 Kukdo Chemical Co., Ltd. Epokukdo KDU-651 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-651 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651 is ge...view more Epokukdo KDU-651 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-651 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651 depend on diluents, photo initiators and additives. view less
15DT7080 Flint Group 15DT7080 is a standard grade blue pigment with a color index number of PB 15:3. It has a specific gravity of 1.6 and is used primarily in aqueous and offset solutions. 15DT7080 has secondary applications in UV/EB and coating solutions.
NANOARC® ZN-2225 Nanophase Technologies A 40 wt% dispersion of 20 nm Zinc Oxide in Propylene Glycol Methyl Ether Acetate. Improves UV resistance in solvent-borne coating formulations.
Epokukdo KDU-651TP75 Kukdo Chemical Co., Ltd. Epokukdo KDU-651TP75 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651TP75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance an...view more Epokukdo KDU-651TP75 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651TP75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651TP75 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651TP75 depend on diluents, photo initiators, and additives. view less
Epokukdo KDU-651M90 Kukdo Chemical Co., Ltd. Epokukdo KDU-651M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and ...view more Epokukdo KDU-651M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651M90 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651M90 depend on diluents, photo initiators, and additives. view less
Epokukdo KDU-652S75 Kukdo Chemical Co., Ltd. Epokukdo KDU-652S75 diluted with 25wt.% styrene monomer is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-652S75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water res...view more Epokukdo KDU-652S75 diluted with 25wt.% styrene monomer is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-652S75 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-652S75 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-652S75 depend on diluents, photo initiators, and additives. view less
NANOARC® ZN-2625 Nanophase Technologies A 50 wt% dispersion of 60 nm Zinc Oxide in Propylene Glycol Methyl Ether Acetate. Improves UV resistance in solvent-borne coating formulations.
NANOARC® ZN-2425 Nanophase Technologies A 40 wt% dispersion of 40 nm Zinc Oxide in Propylene Glycol Methyl Ether Acetate. Improves UV resistance in solvent-borne coating formulations.
Epokukdo KDU-653M90 Kukdo Chemical Co., Ltd. Epokukdo KDU-653M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and ...view more Epokukdo KDU-653M90 diluted with 10wt.% MEK is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653M90 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653M90 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-653M90 depend on diluents, photo initiators, and additives. view less
Epokukdo KDU-651T70 Kukdo Chemical Co., Ltd. Epokukdo KDU-651T70 diluted with 30wt.% TMPTA is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651T70 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance an...view more Epokukdo KDU-651T70 diluted with 30wt.% TMPTA is a UV curable acrylate epoxy oligomer of Bisphenol-A type. UV/EB cured products based on KDU-651T70 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-651T70 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-651T70 depend on diluents, photo initiators, and additives. view less
CN9006 Sartomer Americas CN9006 is a hexafunctional aliphatic urethane acrylate oligomer developed for UV/EB cure coating and ink applications requiring fast cure response, high hardness, excellent abrasion resistance and non-yellowing properties. Hardcoats, plastic coatings, fle...view more CN9006 is a hexafunctional aliphatic urethane acrylate oligomer developed for UV/EB cure coating and ink applications requiring fast cure response, high hardness, excellent abrasion resistance and non-yellowing properties. Hardcoats, plastic coatings, flexo and litho inks are the recommended uses for this product. view less
CN790 Sartomer Americas CN750 is a chlorinated polyester oligomer. It is used in UV/EB ink, coating, and adhesive formulations and provides excellent adhesion to plastics. Performance properties include: adhesion, chemical resistance, flexibility and low shrinkage. Suggested...view more CN750 is a chlorinated polyester oligomer. It is used in UV/EB ink, coating, and adhesive formulations and provides excellent adhesion to plastics. Performance properties include: adhesion, chemical resistance, flexibility and low shrinkage. Suggested applications include: adhesives coatings, inks, litho inks, offset inks and screen inks. view less
CN750 Sartomer Americas CN750 is a chlorinated polyester oligomer. It is used in UV/EB ink, coating, and adhesive formulations and provides excellent adhesion to plastics. CN750 performance properties are adhesion, chemical resistance, flexibility and low shrinkage. Adhesives, c...view more CN750 is a chlorinated polyester oligomer. It is used in UV/EB ink, coating, and adhesive formulations and provides excellent adhesion to plastics. CN750 performance properties are adhesion, chemical resistance, flexibility and low shrinkage. Adhesives, coatings, litho, offset and screen inks are the recommended applications for this product. view less
SILCOLEASE UV CATA 102 Elkem Silicones ​SILCOLEASE UV CATA 102 is a photo initiator for free radical UV curing of silicone acrylate release coatings.  It is intended for use with our SILCOLEASE UV Poly 110/UV RCA 170 release chemistry for coating onto a broad selection of paper and film substr...view more ​SILCOLEASE UV CATA 102 is a photo initiator for free radical UV curing of silicone acrylate release coatings.  It is intended for use with our SILCOLEASE UV Poly 110/UV RCA 170 release chemistry for coating onto a broad selection of paper and film substrates, providing release properties against a wide range of adhesive materials.  Curing of the coating by UV radiation is rapid and efficient, resulting in stable release performance and excellent anchorage to the substrate.  Typical addition level is 3% SILCOLEASE UV CATA 102 by weight on the total formulated bath. view less
EBECRYL® 4175 Allnex EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and...view more EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and EB) coating for application by roller coating, spraying and curtain coating on wood, cork and furniture. EBECRYL® 4175 can be used to formulate clear high-gloss to matt UV- curing systems. view less Request Sample
CN2261 Sartomer Americas CN2261 is a polyester acrylate oligomer. CN2261 was developed for UV curable wood and floor coating applications, where hardness and abrasion resistance are required. CN2261 demonstrates excellent cure rates.
SILCOLEASE UV ADD 152 U1 Elkem Silicones SILCOLEASE UV ADD 152 is a 100% reactive multifunctional acrylate adhesion promoter for use with free radical UV cure silicone acrylate release coatings.  It is designed for use with our SILCOLEASEUV POLY 110/UV RCA 170 release chemistry for coating onto ...view more SILCOLEASE UV ADD 152 is a 100% reactive multifunctional acrylate adhesion promoter for use with free radical UV cure silicone acrylate release coatings.  It is designed for use with our SILCOLEASEUV POLY 110/UV RCA 170 release chemistry for coating onto a broad range of paper and film substrates, providing release properties against a wide range of adhesive materials.  Curing of the coating by UV radiation is rapid and efficient, resulting in stable release performance and excellent anchorage to the substrate.  Typical addition level of SILCOLEASE UV ADD 152 is up to 10% by weight based on the total formulated bath. view less
EBECRYL® 876 Allnex EBECRYL® 876 is a polyester acrylate resin designed for use in UV/EB curable coating applications, in particular over-print varnishes (OPVs). EBECRYL® 876 provides a bisphenol A (BPA) free alternative to epoxy acrylate based formulations while providing e...view more EBECRYL® 876 is a polyester acrylate resin designed for use in UV/EB curable coating applications, in particular over-print varnishes (OPVs). EBECRYL® 876 provides a bisphenol A (BPA) free alternative to epoxy acrylate based formulations while providing equivalent performance properties such as fast cure response, high gloss, hardness and excellent chemical resistance. view less Request Sample
CN2261LV Sartomer Americas CN2261LV is a polyester acrylate oligomer. CN2261LV was developed for UV curable wood and floor coating applications, where hardness and abrasion resistance are required. CN2261LV demonstrates excellent cure rates and impact strength.
Speedcure 937 Lambson Group Ltd. Speedcure 937 is an iodonium hexafluoroantimonate salt dissolved in a glycidyl ether reactive diluent. This product was designed for use with epoxy silicone polymers and is useful in UV cure release coating applications. An amber liquid, it has good solub...view more Speedcure 937 is an iodonium hexafluoroantimonate salt dissolved in a glycidyl ether reactive diluent. This product was designed for use with epoxy silicone polymers and is useful in UV cure release coating applications. An amber liquid, it has good solubility in many resins and can be applied to expoxy silicone release systems as well as cationically cured materials. view less
Lithene ultra® PH Synthomer Lithene ultra® PH is a viscous, low molecular weight, liquid polybutadiene with a high content of 1.2 vinyl microstructure. This product is used in antifoming coating additives and UV cure flexographic printing plates.
Lansperse UV20Y P.A.T. Products Lansperse UV20Y is a high molecular weight polymeric dispersing agent for UV and LED cured coating formulations. This product is particularly effective in yellows and must also be used in combination with our synergist Lansperse SYN1. Lansperse UV20Y is a...view more Lansperse UV20Y is a high molecular weight polymeric dispersing agent for UV and LED cured coating formulations. This product is particularly effective in yellows and must also be used in combination with our synergist Lansperse SYN1. Lansperse UV20Y is a solid 100% active version. view less Request Sample
SONGSORB® CS AQ01 SONGWON Industrial Group SONGSORB® CS AQ01 is an HALS developed especially for water-based coating and when used alone or in combination with Benzotriazole UV absorbers it significantly extends coating lifetimes, preventing defects such as cracking and loss of gloss in outdoor ex...view more SONGSORB® CS AQ01 is an HALS developed especially for water-based coating and when used alone or in combination with Benzotriazole UV absorbers it significantly extends coating lifetimes, preventing defects such as cracking and loss of gloss in outdoor exposure. view less
SAM HS-100 DKSH SAM HS-100 is an acrylate modified acidic adhesion promoting agent designed as a modifier for ultra violet (UV) and electron beam (EB) curable coating on metal and glass. Request Sample
HS9301 Tianyi Chemical Engineering Material Co., Ltd. HS9301, in the form of a transparent resin, is a pure acrylate resin that can be used in vacuum plating surface paints, top coating varnishes, or metal UV paints. This product is soluble in active monomers or inert solvents.
Sunsorb 99-2 Yantai Suny Chem International Co., Ltd. Sunsorb 99-2 is a UV Absorber that is recommended for coating such as trade sales paints, especially wood stains and clear varnishes, general industrial applications, high-bake industrial systems (e.g.coil coatings). Request Sample
LAROMER® UA 8983 AQUA BASF Dispersions & Resins LAROMER UA 8983 AQUA is a liquid aromatic polyurethane dispersion. Due to its good physical drying, formulations based on LAROMER UA 8983 AQUA are suitable for the coating of 3-D objects, where the full energy dose cannot be achieved during the UV curing ...view more LAROMER UA 8983 AQUA is a liquid aromatic polyurethane dispersion. Due to its good physical drying, formulations based on LAROMER UA 8983 AQUA are suitable for the coating of 3-D objects, where the full energy dose cannot be achieved during the UV curing process. These formulations lead to tack-free films with limited mechanical properties that are only obtained by UV curing. Coating formulations based on LAROMER UA 8983 AQUA exhibit good resistance to household chemicals and block as well as provide a good balance between hardness and flexibility. The preferred methods of application are curtain coating and spraying. An economic feature of LAROMER UA 8983 AQUA is its ability to be recovered from the overspray of ultra filtration. view less Request Sample
Harcryl® 1228 UV Harcros Chemicals, Inc. Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...view more Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. view less
Resiflow® LF Estron Chemical, Inc. Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...view more Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less
DOUBLEMER® W3055-2 Double Bond Chemical Ind., Co., Ltd. DOUBLEMER® W3055-2 is an UV waterborne oligomer for wood coating. This product is characterized by its good adhesion and oil sealing ability in wood. It can be easily washed off from roller after coating, has good film forming ability, and is tack free af...view more DOUBLEMER® W3055-2 is an UV waterborne oligomer for wood coating. This product is characterized by its good adhesion and oil sealing ability in wood. It can be easily washed off from roller after coating, has good film forming ability, and is tack free after drying. view less
Resiflow® L-45D Estron Chemical, Inc. Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and or...view more Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel. Resiflow® L-45D can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less
EBECRYL® 4900 Allnex EBECRYL® 4900 is an is an Sn-free aliphatic hydroxyl-functional urethane acrylate oligomer diluted in 40 % butyl acetate. EBECRYL® 4900 is ideal for applications that can utilize a thermal reaction (NCO/OH) followed by UV cure (dual cure). When EBECRYL® 4...view more EBECRYL® 4900 is an is an Sn-free aliphatic hydroxyl-functional urethane acrylate oligomer diluted in 40 % butyl acetate. EBECRYL® 4900 is ideal for applications that can utilize a thermal reaction (NCO/OH) followed by UV cure (dual cure). When EBECRYL® 4900 is combined with NCO functional compounds, such as EBECRYL® 4950, a tack-free surface is created that can be thermoformed to a variety of shapes and draws due to > 250% elongation prior to UV cure. After UV cure, the coating demonstrates excellent stain and chemical resistance combined with high hardness and abrasion resistance. view less Request Sample
Resiflow® LV Estron Chemical, Inc. Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...view more Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less
Resiflow® L5 Estron Chemical, Inc. Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel,...view more Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less
BYK®-3900 P BYK BYK®-3900 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product is a very effective leveling and anti-crater additive for especially critica...view more BYK®-3900 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. This product is a very effective leveling and anti-crater additive for especially critical powder coating systems. It improves the tolerance of the powder coating system towards contamination which might occur during production or application of powder coatings ("post-wetting effect“). As a result BYK-3900P prevents craters, pinholes and other surface defects in powder coatings. BYK-3900P is also suitable for UV-curing powder coating systems. view less Request Sample
Resiflow® L-210 Estron Chemical, Inc. Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...view more Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less
ORGASOL® 1002 D NAT 1 Arkema Orgasol ORGASOL® 1002 D NAT 1 is spheroidal polyamide 6 powder with a narrow particle size distribution and an average diameter of 20µm. ORGASOL® 1002 D NAT 1 has a high melting temperature, above 210°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coating...view more ORGASOL® 1002 D NAT 1 is spheroidal polyamide 6 powder with a narrow particle size distribution and an average diameter of 20µm. ORGASOL® 1002 D NAT 1 has a high melting temperature, above 210°C. ORGASOL® is a range of high performance ultra-fine polyamide powders used as multifunctional additives in coatings, inks, varnishes and technical compounds: • Easy to use: good dispersion capacity, reduced Impact on rheology, density close to 1 • Gloss control, texture and haptic properties adjustment, blocking resistance and coefficient of friction reduction • Abrasion, scratch, impact resistances and flexibility improvement view less