| AQUACER® 526 | BYK | AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves ...view more AQUACER® 526 is a wax emulsion for water-borne effect coatings. It is an emulsion of an anionic modified Ethylene-Vinyl Acetate-Copolymer wax (EVA). This product is suitable for water-borne top coats and base coats. It enhances flip-flop effect, improves orientation of effect pigments (aluminum, mica, etc.), reduces short wave defects (mottling, Bénard cells), and there is no negative influence on chemical resistance. view less | Request Sample |
| Bayhydur® BL XP 2706 | Covestro | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...view more Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. view less | |
| TROYTHIX™ 707 SSA | Arxada – Troy Corporation | TROYTHIX™ 707 SSA is a highly effective pigment suspension agent for higher gloss solvent and water reducible systems. It has a minimal effect on viscosity which is particularly advantageous for industrial coatings, printing inks, adhesives, caulks and se...view more TROYTHIX™ 707 SSA is a highly effective pigment suspension agent for higher gloss solvent and water reducible systems. It has a minimal effect on viscosity which is particularly advantageous for industrial coatings, printing inks, adhesives, caulks and sealants, and trade sales systems such as pigmented stains and aerosol paints. view less | Request Sample |
| TROYKYD® D777 | Arxada – Troy Corporation | Troykyd® D777 is a high efficiency fast acting defoamer for latex systems, water reducible systems, and all aqueous formulations. Use of this product is a response to the severe defoaming requirements of new coating systems. It demonstrates broad spectrum...view more Troykyd® D777 is a high efficiency fast acting defoamer for latex systems, water reducible systems, and all aqueous formulations. Use of this product is a response to the severe defoaming requirements of new coating systems. It demonstrates broad spectrum efficiency combined with permanency of action over extended storage periods. view less | Request Sample |
| AGITAN® 280 | Munzing Chemie | AGITAN® 280 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems. It is com...view more AGITAN® 280 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, synthetic copolymers and nonionic emulsifiers. It is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. view less | |
| SSAWB | PCI Group, Inc. | SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, sands easily and is compatible with most water...view more SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, sands easily and is compatible with most water based topcoats. view less | |
| Troymax™ 350 | Arxada – Troy Corporation | Troymax™350 is an effective drier chelating agent used for drier acceleration and stabilization. Troymax 350 accelerates drying times when used in conjunction with traditional metallic driers. Troymax 350 prevents loss of dry associated with pigmented oleoresinous,high solid, water...view more Troymax™350 is an effective drier chelating agent used for drier acceleration and stabilization. Troymax 350 accelerates drying times when used in conjunction with traditional metallic driers. Troymax 350 prevents loss of dry associated with pigmented oleoresinous,high solid, water reducible and urethane coatings. view less | Request Sample |
| TBS Monomer | Deltech Corporation | TBS Monomer (tertiary-butyl Styrene) is a versatile substitute for styrene monomer with improved properties and fewer handling restrictions. From a performance standpoint, TBS has low volume shrinkage on polymerization, a high affinity for oils, high solvent receptivity and improved water...view more TBS Monomer (tertiary-butyl Styrene) is a versatile substitute for styrene monomer with improved properties and fewer handling restrictions. From a performance standpoint, TBS has low volume shrinkage on polymerization, a high affinity for oils, high solvent receptivity and improved water resistance of copolymers. From an environmental standpoint, TBS has a low vapor pressure and high flash point which reduces emissions from storage or handling and reduces the flammability hazard. Applications include use in coatings, adhesives, films, insulating varnishes, unsaturated polyesters, and ion exchange resins. view less | |
| Borchi® Gol LA 50 | Borchers, A Company of OMG | Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the...view more Borchi® Gol LA 50 is a flow, leveling and substrate wetting agent based on an organic modified polydimethylsiloxane. This product is applied for water based and water soluble systems. It significantly decreases surface tension, allowing a reduction in the interfacial tension differences between the liquid and the substrate. This product reduces cratering and pin hole tendency and is compatible in most binders. It can be used for high quality clears and pigmented industrial and decorative coatings. view less | |
| OPTIGEL® WX | BYK | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...view more OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. view less | Request Sample |
| OPTIGEL® WX | Univar Solutions | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...view more OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. view less | Request Sample |
| JEFFADD™ B 650 | Huntsman Performance Products | JEFFADD™ B 650 additive is a catalytic polyol derived from renewable raw materials. The low-odor product, which is completely water soluble, is specifically designed for use in a variety of urethane foam applications. The autocatalytic nature of JEFFADD B...view more JEFFADD™ B 650 additive is a catalytic polyol derived from renewable raw materials. The low-odor product, which is completely water soluble, is specifically designed for use in a variety of urethane foam applications. The autocatalytic nature of JEFFADD B 650 additive allows for reduced catalyst requirements. Its high water solubility and high bio content make it an ideal choice for low-density polyurethane spray applications. view less | |
| PAT-ADD DA 786 | Patcham USA | PAT-ADD DA 786 is a blend of anionic and non-ionic surface active compounds to use as emulsifier to allow the addition of water into oil based coating systems without any loss of Gloss and hardness of the final paint film. Main benefits are: excellent com...view more PAT-ADD DA 786 is a blend of anionic and non-ionic surface active compounds to use as emulsifier to allow the addition of water into oil based coating systems without any loss of Gloss and hardness of the final paint film. Main benefits are: excellent compatibility with all alkyd resins, strong water-alkyd hybrid resulting in longer stability, imparts high viscosity to the system thus reduces separation, no rusting or water separation on storage as well as on reduction, no reduction of gloss or hardness, and cost reduction. view less | Request Sample |
| Chroma-chem® 895-0005 | Chromaflo Technologies | Chroma-chem® 895-0005 is a Titanium White industrial pigment with the CI Name PW 6. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC ...view more Chroma-chem® 895-0005 is a Titanium White industrial pigment with the CI Name PW 6. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0405 | Chromaflo Technologies | Chroma-chem® 895-0405 is a Quinacridone Red industrial pigment with the CI Name PW 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low V...view more Chroma-chem® 895-0405 is a Quinacridone Red industrial pigment with the CI Name PW 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0724 | Chromaflo Technologies | Chroma-chem® 895-0724 is a Organic Red industrial pigment with the CI Name PR 254. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC a...view more Chroma-chem® 895-0724 is a Organic Red industrial pigment with the CI Name PR 254. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-0975 | Chromaflo Technologies | Chroma-chem® 895-0975 is a Medium Orange industrial pigment with the CI Name PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC ...view more Chroma-chem® 895-0975 is a Medium Orange industrial pigment with the CI Name PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-1006 | Chromaflo Technologies | Chroma-chem® 895-1006 is a Red Oxide industrial pigment with the CI Name PR 101. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and...view more Chroma-chem® 895-1006 is a Red Oxide industrial pigment with the CI Name PR 101. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-1305 | Chromaflo Technologies | Chroma-chem® 895-1305 is a Burnt Umber industrial pigment with the CI Name PBR 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC an...view more Chroma-chem® 895-1305 is a Burnt Umber industrial pigment with the CI Name PBR 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-1806 | Chromaflo Technologies | Chroma-chem® 895-1806 is a Yellow Oxide industrial pigment with the CI Name PY 42. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC a...view more Chroma-chem® 895-1806 is a Yellow Oxide industrial pigment with the CI Name PY 42. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-2605 | Chromaflo Technologies | Chroma-chem® 895-2605 is an Organic Yellow industrial pigment with the CI Name PY 175. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low V...view more Chroma-chem® 895-2605 is an Organic Yellow industrial pigment with the CI Name PY 175. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-5505 | Chromaflo Technologies | Chroma-chem® 895-5505 is a Phthalo Green industrial pigment with the CI Name PG 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC a...view more Chroma-chem® 895-5505 is a Phthalo Green industrial pigment with the CI Name PG 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-9406 | Chromaflo Technologies | Chroma-chem® 895-9406 is a Quinacridone Violet industrial pigment with the CI Name PV 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are lo...view more Chroma-chem® 895-9406 is a Quinacridone Violet industrial pigment with the CI Name PV 19. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-9905 | Chromaflo Technologies | Chroma-chem® 895-9905 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and...view more Chroma-chem® 895-9905 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-9906 | Chromaflo Technologies | Chroma-chem® 895-9906 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and...view more Chroma-chem® 895-9906 is a Lamp Black industrial pigment with the CI Name PBK 7. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| REAXIS® S72 | Reaxis Inc. | REAXIS® S72 is a very high quality stable aqueous tin salt solution that is manufacuted by a proprietary process to insure consistently low impurity levels. A clear and colorless liquid, it is soluble in water and most dilute acids and will decompose in a...view more REAXIS® S72 is a very high quality stable aqueous tin salt solution that is manufacuted by a proprietary process to insure consistently low impurity levels. A clear and colorless liquid, it is soluble in water and most dilute acids and will decompose in alkali hydroxide solutions. This product finds use in Sn/Pd activator formulations for POP. It is also a preferred tin source in electrolytic baths for tin plating. REAXIS® S72 has also been used as a reducing agent. view less | |
| AQUACER® 840 | BYK | AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, impro...view more AQUACER® 840 is a cationic emulsion of an oxidized HD polyethylene wax. This product is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. It enhances flip-flop effect, improves the D.O.I. of clear coats, improves orientation of effect pigments and reduces short wave defects. view less | Request Sample |
| Surfadol® 541S Surfactant | ACME | Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other sys...view more Surfadol® 541S is a free-flowing white powder amorphous silica with a menthol odor. It effectively reduces the surface tension, foam control, and promotes leveling to maintain stable viscosity. It is for non-water, non-solvent based coatings and other systems. Surfadol® 541S is without APEO and non-toxic. view less | |
| WorléeAdd 422 | Worlée-Chemie G.m.b.H. | WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is soluble in water...view more WorléeAdd 422 is a quarternary ammonia salt solution for reducing the electrical resistance of solvent based systems. W´Add 422 does not cause any drying deceleration and has no negative influence on the protection against corrosion. This product is soluble in water, alcohols and ketones. It is partially soluble in aliphatic and aromatic hydrocarbons and esters. view less | |
| REPUTAIN® D20 | Arxada – Troy Corporation | REPUTAIN® D20 is a fast-acting biocide that may be used to reduce microbiological contamination in raw materials and/or products such as aqueous paints and coatings, polymers, slurries, adhesives, latex and resin emulsions, sizing, caulk, process water, a...view more REPUTAIN® D20 is a fast-acting biocide that may be used to reduce microbiological contamination in raw materials and/or products such as aqueous paints and coatings, polymers, slurries, adhesives, latex and resin emulsions, sizing, caulk, process water, along with specialty industrial products including inks, polishes, waxes, detergents, and cleansers. view less | Request Sample |
| White Cloud® SYIC-c | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...view more White Cloud® SYIC-c, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. view less | |
| White Cloud® SYIC-h | Sino-American Pigment Systems, Inc. | White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces orga...view more White Cloud® SYIC-h, in the form of a dry yellow powder, is an inorganic opacifying pigment. This product is insoluble in water and can be used as an extender for organic color pigments within paints, powder coatings, inks, and plastics. It reduces organic usage while improving flow, opacity, dispersibility and film performance. view less | |
| WONDERWET™ IV | Gellner Industrial, LLC | WONDERWET™ IV is a water-soluble acrylic polymer resin designed to retard the drying rate of any water paint, printing ink or adhesive and to replace propylene or ethylene glycols. It is particularly effective in improving the wet edge or open-time of low...view more WONDERWET™ IV is a water-soluble acrylic polymer resin designed to retard the drying rate of any water paint, printing ink or adhesive and to replace propylene or ethylene glycols. It is particularly effective in improving the wet edge or open-time of low- and zero-VOC and non-flat paints and coatings when glycols and other solvents have been replaced or reduced. WONDERWET™ IV will improve the flow, leveling, and appearance of a given paint. view less | |
| UROTUF® L53-MPW-30 | Polynt Composites | UROTUF® L53-MPW-30 is an anionic dispersion of an aliphatic urethane polymer supplied in a blend of N-methylpyrrolidone and water that can be used in clear and pigmented coatings for flexible and semi-rigid plastics, base resins for printing inks, coating...view more UROTUF® L53-MPW-30 is an anionic dispersion of an aliphatic urethane polymer supplied in a blend of N-methylpyrrolidone and water that can be used in clear and pigmented coatings for flexible and semi-rigid plastics, base resins for printing inks, coatings for rubber and leather, and clear or pigmented bake finishes on steel or aluminum. This product has high impact abrasion, stain and chemical resistance. It reduces with water and is compatible with anionic pigments and dispersing agents. view less | |
| Borchers® AF 0670 | Borchers, A Company of OMG | Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during production/application of water...view more Borchers® AF 0670 is a highly active defoamer. It can be used both in clear and pigmented systems and is easy to incorporate. Due to its unique molecular structure, it has little impact on film integrity. It efficiently reduces foam formation during production/application of water based paints and coatings, inks and adhesives. view less | |
| SLIP-AYD® SL 295A | Elementis | SLIP-AYD® SL 295A provides improved surface characteristics of coatings. This is one of several waterborne wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic wa...view more SLIP-AYD® SL 295A provides improved surface characteristics of coatings. This is one of several waterborne wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic waxes. High loadings may tend to reduce gloss. view less | Request Sample |
| Chroma-chem® 895-0905 | Chromaflo Technologies | Chroma-chem® 895-0905 is a Lead-Free Orange industrial pigment with the CI Name PO 34/PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are...view more Chroma-chem® 895-0905 is a Lead-Free Orange industrial pigment with the CI Name PO 34/PO 36. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-2505 | Chromaflo Technologies | Chroma-chem® 895-2505 is a L/F Medium Yellow industrial pigment with the CI Name PY 83/PY 15. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They ar...view more Chroma-chem® 895-2505 is a L/F Medium Yellow industrial pigment with the CI Name PY 83/PY 15. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| Chroma-chem® 895-7205 | Chromaflo Technologies | Chroma-chem® 895-7205 is a Phthalo Blue industrial pigment with the CI Name PB 15:2. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC...view more Chroma-chem® 895-7205 is a Phthalo Blue industrial pigment with the CI Name PB 15:2. Chroma-chem® colorants are recommended for water-borne coating applications such as general industrial coatings, maintenance coatings, and wood coatings. They are low VOC and APE-free, and are designed for use in water reducible and emulsion coatings (air-dry and bake). Each colorant contains a carefully selected blend of vehicle, water, pigment, and surfactants to provide acceptance in a wide range of waterborne applications. They impart minimal or no effect on gloss, dry-time, water-resistance, film hardness, corrosion-resistance, and foaming. view less | Request Sample |
| TROYTHIX™ 704 SSA | Arxada – Troy Corporation | TROYTHIX™ 704 SSA is a highly effective particle suspension agent for both solvent and water reducible formulations. Supplied as a free- flowing powder, TROYTHIX™ 704 SSA has a minimal effect on the application viscosity of the system. This is particularl...view more TROYTHIX™ 704 SSA is a highly effective particle suspension agent for both solvent and water reducible formulations. Supplied as a free- flowing powder, TROYTHIX™ 704 SSA has a minimal effect on the application viscosity of the system. This is particularly advantageous for industrial applications as well as trade sales systems such as pigmented stains and aerosols. view less | Request Sample |
| AQUACER® 507 | BYK | AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhan...view more AQUACER® 507 is an anionic emulsion of an oxidized HD polyethylene wax. It is suitable for use in non-ionic and anionic water-borne automotive systems and industrial paints. This product enhances flip-flop effect, improves the D.O.I. of clear coats, enhances hardness and slip, and reduces short wave defects (mottling, Bénard cells). view less | Request Sample |
| SLIP-AYD® SL 300 | Elementis | SLIP-AYD® SL 300 is waterborne/solventborne, and provides improved surface characteristics of coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular...view more SLIP-AYD® SL 300 is waterborne/solventborne, and provides improved surface characteristics of coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic waxes. High loadings may tend to reduce gloss. view less | Request Sample |
| DAPRO® DF 80 | Elementis | DAPRO® DF 80 is a non-ionic emulsifiable defoamer that imparts excellent foam control properties in aqueous foaming media. It is particularly effective in adhesives, water reducible industrial coatings and acrylic, vinyl acrylic, and polyvinyl acetate emu...view more DAPRO® DF 80 is a non-ionic emulsifiable defoamer that imparts excellent foam control properties in aqueous foaming media. It is particularly effective in adhesives, water reducible industrial coatings and acrylic, vinyl acrylic, and polyvinyl acetate emulsion systems. DAPRO® DF 80 exhibits excellent clean-up properties. view less | Request Sample |
| DUROXYN® SEF 968w/25WA | Allnex | DUROXYN® SEF 968w/25WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterbo...view more DUROXYN® SEF 968w/25WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterborne sizing components. Final compatibility and sizing bath stability needs to be evaluated. view less | Request Sample |
| DUROXYN® SEF 968w/50WA | Allnex | DUROXYN® SEF 968w/50WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterbo...view more DUROXYN® SEF 968w/50WA is a non-drying epoxy resin ester. It is used as binder for fiber sizing. It can be easily formulated and reduced with water to the required solids content. It can be used as the sole sizing material or formulated with other waterborne sizing components. Final compatibility and sizing bath stability needs to be evaluated. view less | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed...view more AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed dry feel. AEROSIL® R 816 is PCPC-listed as 'Silica cetyl silylate'. view less | Request Sample |
| AGITAN® 260 | Munzing Chemie | AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to...view more AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. view less | |
| AGITAN® 265 | Munzing Chemie | AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal soluti...view more AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. view less | |
| CYCAT® 4040 | Allnex | CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to...view more CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems. view less | Request Sample |
| TROYSOL™ UGA | Arxada – Troy Corporation | TROYSOL™ UGA is a multipurpose, silicone-free wetting additive that promotes improved color uniformity, flow and leveling, gloss and substrate wetting in aqueous and water reducible coatings. By stabilizing surface tension gradients upon application and c...view more TROYSOL™ UGA is a multipurpose, silicone-free wetting additive that promotes improved color uniformity, flow and leveling, gloss and substrate wetting in aqueous and water reducible coatings. By stabilizing surface tension gradients upon application and cure, also enhances gloss, flow and leveling and substrate wedding resulting in improved appearance and uniform film coverage. view less | Request Sample |
| PAT-ADD FS 1008 | Patcham USA | PAT-ADD FS 1008 is a silicone resin based mechanical foam stabilizer for foamable PVC plastisol. Main benefits are: fine, homogenous and open-celled foam structure, very good resistance to compression set, reduced water uptake of the gelled and fused PVC ...view more PAT-ADD FS 1008 is a silicone resin based mechanical foam stabilizer for foamable PVC plastisol. Main benefits are: fine, homogenous and open-celled foam structure, very good resistance to compression set, reduced water uptake of the gelled and fused PVC plastisol, and drier touch compared to soap-based foam stabilizer. view less | Request Sample |
| SIL-O-WET® Premier 014NL-PA Inhibited Aluminum Pigment | Silberline Manufacturing Co., Inc. | SIL-O-WET® Premier 014NL-PA is a fine particle size, brilliant, non-leafing aluminum pigment treated with a chemical inhibitor to reduce its tendency to react with water. It is recommended for use in aqueous ink systems. This grade can be used in combinat...view more SIL-O-WET® Premier 014NL-PA is a fine particle size, brilliant, non-leafing aluminum pigment treated with a chemical inhibitor to reduce its tendency to react with water. It is recommended for use in aqueous ink systems. This grade can be used in combination with transparent dyes or pigments to produce a spectrum of bright, clean metallic colors. view less | |
| AROLON® 559-G4-70 | Polynt Composites | AROLON® 559-G4-70 is a non-oxidizing, water-dispersible acrylic resin that can be used in exterior durable baking enamels, non-yellowing clear coatings, and industrial topcoats. This product reduces faster with solids and offers good chemical and stain re...view more AROLON® 559-G4-70 is a non-oxidizing, water-dispersible acrylic resin that can be used in exterior durable baking enamels, non-yellowing clear coatings, and industrial topcoats. This product reduces faster with solids and offers good chemical and stain resistance, and wets pigments very well. The end product will develop a high gloss. view less | |
| EPOTUF® 37-151 | Polynt Composites | EPOTUF® 37-151 is a 100% solids, liquid epoxy resin that can be used in high solids coatings, high peel-strength adhesives, elastomeric coatings, and as a modifier for improving the end flexibility of alkyds, baking polyesters, and epoxies. This product has thermal shock resistance, good weathering properties, with low reduced viscosity and water...view more EPOTUF® 37-151 is a 100% solids, liquid epoxy resin that can be used in high solids coatings, high peel-strength adhesives, elastomeric coatings, and as a modifier for improving the end flexibility of alkyds, baking polyesters, and epoxies. This product has thermal shock resistance, good weathering properties, with low reduced viscosity and water absorption. view less | |
| EPOTUF® 38-694 | Polynt Composites | EPOTUF® 38-694 is an aqueous dispersion of an epoxy ester resin that can be used in industrial maintenance coatings, baking enamels, industrial primers and enamels, and printing inks. This product is designed to formulate with lower co-solvent demands than standard water...view more EPOTUF® 38-694 is an aqueous dispersion of an epoxy ester resin that can be used in industrial maintenance coatings, baking enamels, industrial primers and enamels, and printing inks. This product is designed to formulate with lower co-solvent demands than standard water-reducible epoxy resins. This product features HAP-free solvents and dries rapidly. view less | |
| EPOTUF® 91-263 | Polynt Composites | EPOTUF® 91-263 is a water-reducible epoxy ester formulated without HAPs, which is designed for used in VOC-compliant coatings after it has been neutralized with the proper amines. It can also be used in printing inks. This product provides good corrosion ...view more EPOTUF® 91-263 is a water-reducible epoxy ester formulated without HAPs, which is designed for used in VOC-compliant coatings after it has been neutralized with the proper amines. It can also be used in printing inks. This product provides good corrosion resistance and dries quickly. It adheres well to a variety of substrates, including polypropylene. view less | |
| AFCONA - 3034 | AFCONA Additives Sdn Bhd | AFCONA – 3034 is a fluorocarbon containing organically modified polysiloxane. This clear to slightly yellow liquid is an additive designed to reduce surface tension, and to improve substrate wetting, anti-crater, and levelling performance. AFCONA – 3034 finds application in most paint systems, water...view more AFCONA – 3034 is a fluorocarbon containing organically modified polysiloxane. This clear to slightly yellow liquid is an additive designed to reduce surface tension, and to improve substrate wetting, anti-crater, and levelling performance. AFCONA – 3034 finds application in most paint systems, water- and solvent-based industrial coatings, plastic coatings, and industrial baking systems. view less | |
| DEE FO® PG-20 | Munzing Chemie | DEE FO® PG-20 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink applications that reduces process foam in all color dispersions that helps increase filling and color strength. It is commonly used in high performance coatings and water...view more DEE FO® PG-20 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink applications that reduces process foam in all color dispersions that helps increase filling and color strength. It is commonly used in high performance coatings and water-based inks. view less | |
| LYNDCOAT BR 1211 | Elkem Silicones | LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtim...view more LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtimes. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. view less | |
| Road marking paint, water-based, white (Formulation #S 11401.3A) | Hoffmann Mineral | Titanium dioxide reduced, low film thickness (wet film < 600 μm) high abrasion resistance. Features SILLITIN Z 89 or SILFIT Z 91. | |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-...view more HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. view less | Request Sample |
| OPTIGEL® LX | BYK | OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in water...view more OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in water reducible (cosolvent) systems. It can be used alone or in combination with cellulosic materials to improve pigment suspension and to impart dripless application properties. view less | Request Sample |
| SIL-O-WET® 651-PA | Silberline Manufacturing Co., Inc. | SIL-O-WET® 651-PA is a leafing aluminum pigment with a fine, corn-flake particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous ink systems. SIL-O-WET® 651-PA is 68% non-volatile ...view more SIL-O-WET® 651-PA is a leafing aluminum pigment with a fine, corn-flake particle size. This product is treated with a chemical inhibitor to reduce reactions with water and is typically applied in aqueous ink systems. SIL-O-WET® 651-PA is 68% non-volatile by weight and provides opacity, brightness, and a strong metallic effect. view less | |
| AGITAN® 361 | Munzing Chemie | AGITAN® 361 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and vegetable oils, biodegradable, non volatile. It is a highly effective defoamer for aqueous emulsion based systems and water reducible systems that is...view more AGITAN® 361 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and vegetable oils, biodegradable, non volatile. It is a highly effective defoamer for aqueous emulsion based systems and water reducible systems that is ideal for clear coats, non-pigmented and low viscous systems. It is commonly used in adhesives, and architectural, industrial and wood coatings. view less | |
| Norox® MEKP-925H | UNITED INITIATORS GMBH & CO KG | Norox® MEKP-925H, in the form of a water white liquid, is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both vinyl ester resins and unsaturated polyester resins. It is specifically formulated to reduce gas gen...view more Norox® MEKP-925H, in the form of a water white liquid, is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both vinyl ester resins and unsaturated polyester resins. It is specifically formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in barrier coatings, corrosion resistant structures, and gel coats. view less | |
| Norox® MEKP-925H RED | UNITED INITIATORS GMBH & CO KG | Norox® MEKP-925H RED, in the form of a water white liquid, is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both vinyl ester resins and unsaturated polyester resins. It is specifically formulated to reduce gas...view more Norox® MEKP-925H RED, in the form of a water white liquid, is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both vinyl ester resins and unsaturated polyester resins. It is specifically formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in barrier coatings, corrosion resistant structures, and gel coats. view less | |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water...view more HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| DETERSOL ATS | Chemipol | DETERSOL ATS is a non-ionic surfactant with humectant properties. DETERSOL ATS is based on modified organopolysiloxanes with wetting properties. DETERSOL AL 74 is a versatile humectant suitable for a high number of applications: to reduce the surface tens...view more DETERSOL ATS is a non-ionic surfactant with humectant properties. DETERSOL ATS is based on modified organopolysiloxanes with wetting properties. DETERSOL AL 74 is a versatile humectant suitable for a high number of applications: to reduce the surface tension of the treatments, to improve the flow properties of the product, or to increase the diffusion in foliage applications. view less | Request Sample |
| Silsurf® A008 | Siltech Corp. | Silsurf® A008 is a very low molecular weight ethoxylated polydimethylsiloxane and it is a water-soluble silicone surfactant with excellent wetting capabilities. It is a super wetter and can be formulated where fast wetting is required. Silsurf® A008, at a...view more Silsurf® A008 is a very low molecular weight ethoxylated polydimethylsiloxane and it is a water-soluble silicone surfactant with excellent wetting capabilities. It is a super wetter and can be formulated where fast wetting is required. Silsurf® A008, at a use level of 0.1%, reduces the surface tension of water to below 20 dynes/cm and is therefore an excellent wetting and spreading agent. It's wetting properties are useful in personal care applications, textile, inks & coatings, agricultural and any other areas where wetting and spreading is desired. view less | |
| Siltech® C-228 | Siltech Corp. | Siltech® C-228 is a 51% active polyether siloxane copolymer that is primarily used as a leveling agent for both solvent-borne and water-borne systems. It also provides some de-foaming. It is diluted in butyl cellosolve. Siltech® C-228 is used in solvent-b...view more Siltech® C-228 is a 51% active polyether siloxane copolymer that is primarily used as a leveling agent for both solvent-borne and water-borne systems. It also provides some de-foaming. It is diluted in butyl cellosolve. Siltech® C-228 is used in solvent-borne and water-borne ink and paint formulations to improve leveling. It also increases surface slip, thereby improving mar resistance and reducing the formation of Bernard cells. It can be incorporated at any production stage or added during final let-down. view less | |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...view more Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. view less | Request Sample |
| ORGASOL® 2002 D NAT 1 | Arkema | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in water...view more ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. view less | Request Sample |
| Bubreak® 4400 | Buckman Laboratories, Inc. | Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Adminis...view more Bubreak® 4400 is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 4400 has been designed to perform as both an antifoam, fighting foam formation, and as a defoamer, breaking down existing foam. This product is effective in a wide range of resins, including acrylics, vinyl acrylics, poly vinyl acetates, and water-reducible alkyds. view less | |
| Bubreak® 454C | Buckman Laboratories, Inc. | Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and ...view more Bubreak® 454C is an antifoam/defoamer concentrate for use in water-based coatings, adhesives, and similar emulsion-based systems. The product is composed of substances that have been allowed for use under 21 CFR § 176.200 and 176.210 of the U.S. Food and Drug Administration regulations. Most water and emulsion-based products generate foam during production, shipping, or application. Bubreak® 454C has been designed to perform as both an antifoam, fighting foam formulation, and as a defoamer, breaking down existing foam. It is effective in a wide range of resins, including acrylics, vinyl acrylics, polyvinyl acetates, and water-reducible alkyds. view less | |
| RHEOVIS® AS 1125 NA | BASF Formulation Additives | RHEOVIS® AS 1125 NA is an efficient acrylic thickener (ASE) with pronounced pseudoplastic (low-shear) flow behavior. It is recommended for many aqueous paint and coating systems. It offers performance highlights such as excellent thickening efficiency, increased KU-viscosity, prolonged open time, reduced sagging, high yield point, lower water...view more RHEOVIS® AS 1125 NA is an efficient acrylic thickener (ASE) with pronounced pseudoplastic (low-shear) flow behavior. It is recommended for many aqueous paint and coating systems. It offers performance highlights such as excellent thickening efficiency, increased KU-viscosity, prolonged open time, reduced sagging, high yield point, lower water uptake, and excellent viscosity stability after tinting. view less | |
| CreaTech TC 150 | CreaFill Fibers Corp. | CreaTech TC 150 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce t...view more CreaTech TC 150 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| CreaTech TC 200 | CreaFill Fibers Corp. | CreaTech TC 200 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce t...view more CreaTech TC 200 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| CreaTech TC 500 | CreaFill Fibers Corp. | CreaTech TC 500 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce t...view more CreaTech TC 500 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| CreaTech TC 750 | CreaFill Fibers Corp. | CreaTech TC 750 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce t...view more CreaTech TC 750 is a highly pure functional cellulose fiber that provides reinforcement, sag and slump control, and other rheological properties. It provides water hold, which aids workability. This product can be used as a functional filler to reduce the use of more expensive hydroxyethyl cellulose, methylcellulose. It may also be used to modify the surface aesthetics, such as a matte-like, non-skid surface. view less | |
| Pansil UltraSpheres™ 4000 | Tolsa SA | Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water...view more Pansil UltraSpheres™ 4000 consists of ceramic microspheres. It can be used as an additive or filler for paints, coatings, mastics, and other construction materials. It can be used in high solid industrial coatings, heavy duty maintenance coatings, marine coatings, aircraft coatings, water reducible industrial coatings, powder coatings, coil coatings, radiation-curable inks and coatings, and primers. view less | |
| SYNTHEMUL® 40-416 | Polynt Composites | SYNTHEMUL® 40-416 is an all-acrylic, high-performance latex. This product offers resistance to efflorescence, early water resistance with reduced blistering, and adheres well to chalk and gloss alkyds. It can be used in a range of house paints from flat t...view more SYNTHEMUL® 40-416 is an all-acrylic, high-performance latex. This product offers resistance to efflorescence, early water resistance with reduced blistering, and adheres well to chalk and gloss alkyds. It can be used in a range of house paints from flat through semi-gloss styles, exterior opaque stains, masonry paints, primers, and as a clear wood sealer for urethane topcoats. view less | |
| SiSiB® PC6112 | SiSiB SILICONES | SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals fro...view more SiSiB® PC6112 (BTMSE) is a clear to straw liquid bis-silanes. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. view less | |
| BURGESS OPTIWHITE MX® | Burgess Pigment Company | BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...view more BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. view less | |
| ORGASOL® 1002 D NAT 1 | Arkema | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in water...view more ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. view less | Request Sample |
| ORGASOL® 2001 EXD NAT 1 | Arkema | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in water...view more ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. view less | Request Sample |
| ORGASOL® 2001 UD NAT 1 | Arkema | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in water...view more ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. view less | Request Sample |
| Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) | GRACE | Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with a...view more Water-borne Vinyl Acrylic Dispersion Primer (Formulation #3.2) is a guideline formulation offered to show reduced blistering and wet dispersion loss at the scribe compared to a control bank. Haloflex 202 is a water thinnable vinyl-acrylic dispersion with an acidic pH. The addition of Alcophor 827 is beneficial in two respects: the pH is stabilised at 6.5 which would otherwise be buffered by SHIELDEX® anti-corrosive pigments, and it also improves the corrosion resistanceafter hot salt spray and humidity exposure. The addition level of SHIELDEX® anti-corrosive pigments should not exceed 3 wt.-% to ensure that the pH of the final formulation does not exceed 7. view less | |
| ORGASOL® 2002 ES3 NAT 3 | Arkema | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well water...view more ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. view less | Request Sample |
| ORGASOL® 2002 ES4 NAT 3 | Arkema | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in water...view more ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. view less | Request Sample |
| ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in water...view more ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. view less | Request Sample |
| ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well water...view more ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. view less | Request Sample |
| SLIP-AYD® SL 177 | Elementis | SLIP-AYD® SL 177 provides improved surface characteristics of waterborne/solventborne coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight ...view more SLIP-AYD® SL 177 provides improved surface characteristics of waterborne/solventborne coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic waxes. High loadings may tend to reduce gloss. The effect of a wax can be altered by blending several waxes together. view less | Request Sample |
| Acrylamac® 232-1185 | Polynt Composites | Acrylamac® 232-1185 is a water reducible solution acrylic designed for industrial electrocoating or dip tanks where chemical, stain and corrosion resistance are required. This resin provides stable low VOC systems when crosslinked with melamine, urea or e...view more Acrylamac® 232-1185 is a water reducible solution acrylic designed for industrial electrocoating or dip tanks where chemical, stain and corrosion resistance are required. This resin provides stable low VOC systems when crosslinked with melamine, urea or epoxy resins. It features hard films with excellent gloss and performance properties. Manufactured in North America. All components of this product are listed on the DSL. view less | |
| EFKA® FA 4671 | BASF Formulation Additives | EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water...view more EFKA® FA 4671 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binders. This results in reduced dispersion time, stabilization of the pigment dispersion, decreased flooding of pigments, and prevention of hard sedimentation. This product is an alkylol ammonium salt of a high-molecular weight carboxylic acid. EFKA® FA 4671 is suitable for use in low or high-polarity solvent systems as well as water-based coatings. It is used to reduce flooding and settling in non-polar systems e.g. air drying alkyd paints. It is an effective anti-settling agent in wash and shop primers. It improves the color acceptance of tinting bases in white latex paints, resulting in higher pigment efficiency. view less | |
| Cinergi™ 1407 A | Lawter | Cinergi™ 1407 A is a water-resistant gloss offset varnish that combines linseed, tung oil and phenolic varnish into a product that provides high gloss and water resistance. A good holdout and high viscosity ensure that inks with the product can be reduced...view more Cinergi™ 1407 A is a water-resistant gloss offset varnish that combines linseed, tung oil and phenolic varnish into a product that provides high gloss and water resistance. A good holdout and high viscosity ensure that inks with the product can be reduced with aliphatic solvents or low viscosity drying oils to boost setting speed without losing gloss. It also has the benefit of good soap and alkali resistance making it ideal for use in a variety of applications. Cinergi™ 1407 A is considered ideal for use in the highest quality offset and letterpress inks, while the product's water resistant feature means it can improve the working properties of lithographic inks. view less | |
| Butrol® 22 | Buckman Laboratories, Inc. | Butrol® 22 is a nonlead, nonchrome corrosion inhibitive pigment for use in trade sales primers, industrial coatings, and heavy-duty maintenance coatings, as well as water-based systems, both emulsion and water-reducible alkyds, and solvent-based systems, ...view more Butrol® 22 is a nonlead, nonchrome corrosion inhibitive pigment for use in trade sales primers, industrial coatings, and heavy-duty maintenance coatings, as well as water-based systems, both emulsion and water-reducible alkyds, and solvent-based systems, such as conventional alkyds, urethanes, and epoxies. Because Butrol® 22 can be used across this full range of systems, it can replace several anticorrosive pigments, simplifying formulating and lowering inventory costs. This product is based on barium metaborate monohydrate and has been optimized for corrosion applications. view less | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water...view more Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. view less | |
| ALKATERGE T | Univar Solutions | ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible wit...view more ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE-T is miscible with almost all organic liquids. ALKATERGE-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less | Request Sample |
| SR512 | Sartomer Americas | SR512, 2-hydroxyethylethylene urea, reduces VOCs and increases solids levels, while maintaining film properties of solvent-based and water-borne industrial baking coatings crosslinked with amino resins. SR512 significantly improves the gloss and clarity o...view more SR512, 2-hydroxyethylethylene urea, reduces VOCs and increases solids levels, while maintaining film properties of solvent-based and water-borne industrial baking coatings crosslinked with amino resins. SR512 significantly improves the gloss and clarity of emulsion-based coatings, and increases the open-time of waterborne systems. Suggested applications include: adhesives; sealants, chemical intermediates, paints, plastic, metal, and wood coatings, and inks. view less | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water...view more Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. view less | |
| BECKOSOL AQ® 206 | Polynt Composites | BECKOSOL AQ® 206, in the form of a milky, white liquid, is a medium-oil alkyd latex based on biorenewable fatty acids that can be used in OTC, CARB and AIM-compliant interior or exterior architectural enamels and decorative finishes in a range of glosses from very high gloss to satin. This product provides good initial film color and reduced long-term yellowing and cleans up with soap and water...view more BECKOSOL AQ® 206, in the form of a milky, white liquid, is a medium-oil alkyd latex based on biorenewable fatty acids that can be used in OTC, CARB and AIM-compliant interior or exterior architectural enamels and decorative finishes in a range of glosses from very high gloss to satin. This product provides good initial film color and reduced long-term yellowing and cleans up with soap and water. view less |
