| FASTRACK™ 2706 | Univar Solutions | FASTRACK™ 2706 is an all acrylic emulsion designed for water borne traffic marking paints where application conditions aren't ideal due to humidity, temperature and air-flow. | Request Sample |
| Dynasylan® F 8815 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8815 is a fluoroalkylfunctional water-borne oligosiloxane which acts as an oleophobic surface modification agent on oxidic, carboxy- and hydroxyfunctional substrates for example ceramic or natural fibers like cotton or leather. | |
| ADDITOL® dry CF100 | Allnex | ADDITOL® dry CF100 - drier/dryer/siccative - is a ready to use, universal Cobalt replacement drier designed to have excellent compatibility and fast incorporation in all solvent borne and waterborne alkyd paints. It is based on twin accelerated Manganese. | Request Sample |
| APACA | PCI Group, Inc. | APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gl...view more APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gloss, slip and mar resistance. view less | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® SIVO 110 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 110 is a multifunctional, basically VOC-free, water-borne sol-gel hybrid binder cured at elevated temperatures. It is composed of organofunctional silanes and functionalized SiO2 particles. | |
| CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
| NOVARES® L 40 | Rain Carbon Germany GmbH | NOVARES® L 40 is a special liquid resin that is ideal for use in water-borne adhesives, flooring adhesives, sealants, jointing compounds, floor coatings, sealing compounds, and casting resins | |
| Pangel M150 | Tolsa SA | Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...view more Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. view less | |
| SYLOID® W 900 Multifunctional Silica | Univar Solutions | SYLOID® W 900 Multifunctional Silica is a multifuctional silica that is a synthetic amorphous matting agent appearing as white free flowing powder. It is an untreated, medium porosity silica. The pores of the silica are filled with water and consequently ...view more SYLOID® W 900 Multifunctional Silica is a multifuctional silica that is a synthetic amorphous matting agent appearing as white free flowing powder. It is an untreated, medium porosity silica. The pores of the silica are filled with water and consequently the water content is approximately 55 %. SYLOID® W 900 has been specially designed for water-borne systems, but may also find use in solvent-borne systems. It is mainly used in paper coating, especially for ink-jet paper, to improve the ink uptake. It can also be used in a structuring agent and as anti-skid aid in paint systems. view less | Request Sample |
| SYLOID® W 900 Multifunctional Silica | GRACE | SYLOID® W 900 Multifunctional Silica is a multifuctional silica that is a synthetic amorphous matting agent appearing as white free flowing powder. It is an untreated, medium porosity silica. The pores of the silica are filled with water and consequently ...view more SYLOID® W 900 Multifunctional Silica is a multifuctional silica that is a synthetic amorphous matting agent appearing as white free flowing powder. It is an untreated, medium porosity silica. The pores of the silica are filled with water and consequently the water content is approximately 55 %. SYLOID® W 900 has been specially designed for water-borne systems, but may also find use in solvent-borne systems. It is mainly used in paper coating, especially for ink-jet paper, to improve the ink uptake. It can also be used in a structuring agent and as anti-skid aid in paint systems. view less | |
| CYMEL® U-65 | Allnex | CYMEL® U-65 resin is a high solids, methylated urea resin designed for use in both water and solvent-borne systems as a crosslinking agent for a variety of polymers that contain hydroxyl functionality. | Request Sample |
| CH-940 | Yangzhou Chenhua New Material CO., LTD. | CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating. | |
| CH-920 | Yangzhou Chenhua New Material CO., LTD. | CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating. | |
| MFA 31 | PCI Group, Inc. | MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances c...view more MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances color uniformity and allows for sharper gloss. view less | |
| Celopro® HHB15S | Celotech Chemical Co., Ltd. | Celopro® HHB15S is a medium viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, personal care products, and h...view more Celopro® HHB15S is a medium viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, personal care products, and household cleaning products. view less | |
| Celopro® HHB60S | Celotech Chemical Co., Ltd. | Celopro® HHB60S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, personal care products,...view more Celopro® HHB60S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, personal care products, and household cleaning products. view less | |
| Dynoadd® D-963 | Dynoadd by Dynea | Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pig...view more Dynoadd® D-963 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-963 provides excellent pigment affinity and effective steric stabilization. The rapid initial pigment wetting and deflocculation achieved with Dynoadd® D-963 results in stable dispersions with low particle size. Pigment concentrates produced using Dynoadd® D-963 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. view less | Request Sample |
| 2-Mercaptoethanol | BASF Corporation, Chemical Intermediates | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| EPOTUF® 37-685 | Polynt Composites | EPOTUF® 37-685 is a patented amine functional dispersion that is used to formulate two component water-borne epoxy coatings with properties comparable to conventional solvent based two component epoxy coatings. | |
| UROTUF® F97-MPW-33 | Polynt Composites | UROTUF® F97-MPW-33 is a water-borne, oil modified urethane dispersion designed for single package, selfcrosslinking coatings and varnishes requiring VOC regulatory compliance combined with a high level of performance. | |
| Kamin® 611 | KaMin Solutions | Kamin® 611 is a high brightness, fine particle size, “naturally delaminated” kaolin clay with moderate water demand. Kamin® 611 is ideally suited for water-borne paint, ink, and adhesive applications where high gloss, holdout, and controlled rheology are ...view more Kamin® 611 is a high brightness, fine particle size, “naturally delaminated” kaolin clay with moderate water demand. Kamin® 611 is ideally suited for water-borne paint, ink, and adhesive applications where high gloss, holdout, and controlled rheology are important. view less | Request Sample |
| UROTUF® F102-W-36 | Polynt Composites | UROTUF® F102-W-36 is an anionic dispersion of a water-borne oil modified urethane polymer provided at 36% solids in water. This resin is similar to UROTUF® F100-W-36, provided solvent free, but has a metallic drier already incorporated for convenience. | |
| SYLOID® ED 30 Matting Agent | Univar Solutions | SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coatings; high quality water-borne and solvent-born...view more SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coatings; high quality water-borne and solvent-borne furniture coatings; DIY wood finishes; artificial and natural leather coatings; and coatings for automotive plastic parts. view less | Request Sample |
| SYLOID® ED 30 Matting Agent | GRACE | SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coatings; high quality water-borne and solvent-born...view more SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coatings; high quality water-borne and solvent-borne furniture coatings; DIY wood finishes; artificial and natural leather coatings; and coatings for automotive plastic parts. view less | |
| FASTRACK™ HD-21A | Univar Solutions | FASTRACK™ HD-21A is a self cross-linking, all acrylic emulsion designed for water borne traffic marking paint where rapid drying, excellent glass bead retention and ease-of-use are critical. | Request Sample |
| Bayhydur® BL 5335 | Covestro | Bayhydur® BL 5335 is water-dispersed blocked aliphatic polyisocyanate resin based on dicyclohexylmethane diisocyanate (H12MDI) dissolved in water/MPA/xylene, 56 : 4.5 : 4.5. Used as the hardener component for 1K-waterborne coatings. Bayhydur® BL 5335 is ...view more Bayhydur® BL 5335 is water-dispersed blocked aliphatic polyisocyanate resin based on dicyclohexylmethane diisocyanate (H12MDI) dissolved in water/MPA/xylene, 56 : 4.5 : 4.5. Used as the hardener component for 1K-waterborne coatings. Bayhydur® BL 5335 is used as a crosslinking agent for hydroxyl-functional water-borne resins view less | |
| BYK®-081 | BYK | BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly...view more BYK®-081 is a fluorine-free defoamer for solvent-borne and amine-neutralized systems. It is a highly effective and spontaneous defoamer. It can be used in amine-neutralized, water reducible coating systems and in solvent-borne coatings. It is particularly suitable for high solid alkyd systems in the architectural coatings sector. The additive shows good compatibility with clear coatings. BYK®-081 is not suitable for aqueous systems that contain little or no organic solvent as co-solvent. view less | Request Sample |
| Chisorb® 5228S | Double Bond Chemical Ind., Co., Ltd. | Chisorb® 5228S is a water soluable UV absorber designed specifically for the protection of nylon , wool, silk, rayon and leather from the damage of UV light as well as improving light fastness of dye and pigment. Chisorb® 5228S is water soluble and has go...view more Chisorb® 5228S is a water soluable UV absorber designed specifically for the protection of nylon , wool, silk, rayon and leather from the damage of UV light as well as improving light fastness of dye and pigment. Chisorb® 5228S is water soluble and has good compatibility in water borne PU, Acrylic. This product is a light yellow solution. view less | |
| DryXtra – Chelating Agent | Huntsman Pigments & Additives | DryXtra is a primary amine based chelating agent for solvent and water borne alkyds and unsaturated polyester resin. It is especially formulated to be highly active in combination with Nuodex DryCoat but can be used to enhance the performance of tradition...view more DryXtra is a primary amine based chelating agent for solvent and water borne alkyds and unsaturated polyester resin. It is especially formulated to be highly active in combination with Nuodex DryCoat but can be used to enhance the performance of traditional Manganese driers. view less | |
| AFCONA - 5585 | AFCONA Additives Sdn Bhd | AFCONA – 5585 is a high molecular weight block copolymer with pigment affinity groups. This clear yellowish liquid functions as a solvent-free wetting and dispersing additive for solvent-borne and water based industrial coatings and architectural coatings...view more AFCONA – 5585 is a high molecular weight block copolymer with pigment affinity groups. This clear yellowish liquid functions as a solvent-free wetting and dispersing additive for solvent-borne and water based industrial coatings and architectural coatings. view less | |
| BYK-315 N | BYK | BYK-315 N is a silicone-containing surface additive for solvent-borne coating systems, in particular automotive coatings. Slight reduction in the surface tension and slight increase in surface slip. No blushing after water immersion test. | Request Sample |
| UROTUF® F600-W-40 | Polynt Composites | UROTUF® F600-W-40 is a self-crosslinking water-borne uralkyd resin. This product offers good adhesion to concrete, with good gasoline and chemical resistance. It can be used in one-component garage floor coatings. | |
| PAT-ADD DA 787 | Patcham USA | PAT-ADD DA 787 is an emulsifier and stabilizer of water in organic solvent borne paints. Aqueous solutions of PAT-ADD DA 787 are admixed into the paint under mild conditions. The product provides impressively long term stability without phase separation, ...view more PAT-ADD DA 787 is an emulsifier and stabilizer of water in organic solvent borne paints. Aqueous solutions of PAT-ADD DA 787 are admixed into the paint under mild conditions. The product provides impressively long term stability without phase separation, pigment flocculation, gloss reduction or adverse effects on drying time. It enables reduction in VOC content for solvent borne paints by replacing thinner with water. Main benefits are: enabling paint cost reduction with water replacement, enabling reduction of VOC level, maintaining standard paint manufacturing conditioners, supports colorant acceptance, and excellent dry film performance, such as high gloss, opacity, and adhesion. view less | Request Sample |
| Dynasylan® HYDROSIL 1151 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1151 is a water-borne amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL ...view more Dynasylan® HYDROSIL 1151 is a water-borne amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1151 contains about 40% active silane content in water. view less | |
| Kamin® 90B | KaMin Solutions | Kamin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important. Kamin® 90B has the physical form of ...view more Kamin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important. Kamin® 90B has the physical form of spray dried beads or slurry. view less | Request Sample |
| Dynasylan® HYDROSIL 2627 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2627 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| Dynasylan® HYDROSIL 2909 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2909 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| Dynasylan® SIVO 121 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 121 is a multifunctional, nearly VOC-free, water-borne silane system. It can act most prominently as a hydrophobizing or olephobizing agent for plain wood surfaces or weathered, originally painted treated wood surfaces. | |
| Celopro® HHB30S | Celotech Chemical Co., Ltd. | Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleanin...view more Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. view less | |
| Dynasylan® HYDROSIL 1153 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasyla...view more Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1153 contains about 85% active silane content in water. view less | |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| DISPERBYK® | BYK | DISPERBYK® is a wetting and dispersing additive for solvent-borne and aqueous systems. It is a solution of an alkylolammonium salt of a lower molecular weight polycarboxylic acid polymer. This product is suitable for both aqueous and solvent-borne systems...view more DISPERBYK® is a wetting and dispersing additive for solvent-borne and aqueous systems. It is a solution of an alkylolammonium salt of a lower molecular weight polycarboxylic acid polymer. This product is suitable for both aqueous and solvent-borne systems. When added to the millbase of a white paint, it improves color acceptance and color development. In solvent-based and aqueous coatings DISPERBYK® prevents hard sedimentation. Furthermore, DISPERBYK® improves the effectiveness of pyrogenic silica. The water content may cause problems in epoxy and polyurethane systems. view less | Request Sample |
| TICO® Yellow 588 | Heubach Ltd | TICO® Yellow 588 is a green shade yellow with good opacity and high tinting strength. It is suitable for both solvent-borne and water-borne systems. This product can be used to replace bismuth vanadate. It can be used for highly durable applications, such...view more TICO® Yellow 588 is a green shade yellow with good opacity and high tinting strength. It is suitable for both solvent-borne and water-borne systems. This product can be used to replace bismuth vanadate. It can be used for highly durable applications, such as coil, powder, automotive, and general industrial coatings. This product has a 1/3 SD reduction ratio of 1 : 1.7, an oil absorption of 15 ml/100g, a density of 3.3 g/cm^3, and a pH level of 6-8. view less | Request Sample |
| DISPERBYK®-2013 | BYK | DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excel...view more DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excellent stabilization, in particular in 100% UV systems and particularly of organic pigments and carbon black pigments. In so doing, this product has an impressive, effective viscosity-reducing effect, simultaneously reducing thixotropic flow behavior. view less | Request Sample |
| ADDITOL® VXW 6208/60 | Allnex | ADDITOL® VXW 6208/60 is a polymeric non-ionic dispersing and wetting additive for solvent-borne, solvent-free and water-dilutable paint systems. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high‐...view more ADDITOL® VXW 6208/60 is a polymeric non-ionic dispersing and wetting additive for solvent-borne, solvent-free and water-dilutable paint systems. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high‐filled paint systems. This product is used for the production of binder‐free pigment pastes and for tinting base colors. ADDITOL® VXW 6208/60 is mainly applied as wetting agent in solvent‐free and solvent‐borne two pack‐epoxy‐systems. view less | Request Sample |
| RHEOLATE® 244 | Elementis | RHEOLATE® 244 is a 25 % solids solution of a polyether urea polyurethane-based associative rheology modifier designed for use in water-borne paints, inks and adhesives containing small- particle-sized emulsions and high-volume-solids systems. | Request Sample |
| XIAMETER® OFX-0190 Fluid | Univar Solutions | XIAMETER® OFX-0190 Fluid is a modified silicone, designed primarily to provide leveling, slip and mar resistance in water and solvent borne paints, inks and coatings. This additive also improves anti blocking properties, gloss and substrate wetting. | Request Sample |
| BW300 | Tianyi Chemical Engineering Material Co., Ltd. | BW300, in the form of a dry, white, micronized powder. is a water-borne matting agent that can be used in coatings. This product is chemically inactive and has an amorphous form with a high specific surface area. Its pH value is between 5.5 and 7.0. | |
| BW330 | Tianyi Chemical Engineering Material Co., Ltd. | BW330, in the form of a dry, white, micronized powder. is a water-borne matting agent that can be used in coatings. This product is chemically inactive and has an amorphous form with a high specific surface area. Its pH value is between 5.5 and 7.0. | |
| Polyplate® HMT | KaMin Solutions | Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crac...view more Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crack resistance, and reinforcement properties in water based systems. view less | Request Sample |
| DOWSIL™ 88 Additive | Dow Performance Silicones | DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings a...view more DOWSIL™ 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. view less | |
| Kamin® HG90 | KaMin Solutions | Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints.Kamin® HG90 is ideally suited for water-borne paint and ink applications, w...view more Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints.Kamin® HG90 is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important. It has the physical form of spray dried beads or slurry. view less | Request Sample |
| Celopro® HHB50S | Celotech Chemical Co., Ltd. | Celopro® HHB50S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, interior and exterior c...view more Celopro® HHB50S is a high viscosity type of Hydroxyethyl cellulose (HEC) with delayed solubility. It is a non-ionic, water-soluble material. This product can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. view less | |
| N-Methylpyrrolidone, NMP | BASF Corporation, Chemical Intermediates | N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-born...view more N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings. view less | |
| PLIOTEC™ 115 | Synthomer | PLIOTEC™ 115 is a vinyl-acetate resin with excellent adhesion to polyurethane foam and other substrates. It imparts fast drying and ease of application to intumescent coatings used on non-metallic substrates. Water-borne resin for intumescent coatings for...view more PLIOTEC™ 115 is a vinyl-acetate resin with excellent adhesion to polyurethane foam and other substrates. It imparts fast drying and ease of application to intumescent coatings used on non-metallic substrates. Water-borne resin for intumescent coatings for PU foams. view less | |
| Barium Metaborate | Sino-American Pigment Systems, Inc. | Barium Metaborate, in the form of a white crystalline powder, is a non-toxic anti-corrosive pigment. This product can be used in solvent-borne or water-based coatings. In addition, it is resistant to powdering, mildew, stain, and fire. This product con...view more Barium Metaborate, in the form of a white crystalline powder, is a non-toxic anti-corrosive pigment. This product can be used in solvent-borne or water-based coatings. In addition, it is resistant to powdering, mildew, stain, and fire. This product contains at most 1% moisture. view less | |
| JTR-719 | Shanghai Jiuta Chemical Co., Ltd. | JTR-719 is a universal grade rutile titanium dioxide that is created by sulphate process. This product is highly efficient and has good whiteness and excellent consistency. It also has good opacity and it is recommended to be used in coatings, water-borne...view more JTR-719 is a universal grade rutile titanium dioxide that is created by sulphate process. This product is highly efficient and has good whiteness and excellent consistency. It also has good opacity and it is recommended to be used in coatings, water-borne paints, and printing inks. view less | |
| Kamin® 90 | KaMin Solutions | Kamin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important. K...view more Kamin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important. Kamin® 90 comes in the form of a white, milled fine powder. view less | Request Sample |
| XIAMETER® AFE-2210 Antifoam Emulsion | Dow Performance Silicones | XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product i...view more XIAMETER® AFE-2210 Antifoam Emulsion is a water-dilutable, 10% active emulsion that is designed to control foam in a variety of aqueous systems. It shows effective anti foam performance and compatibility in clear, water-borne wood coatings. This product is suitable for use in high gloss, semi-gloss and flat latex (emulsion) paints. view less | |
| METOLAT® 365 | Munzing Chemie | METOLAT® 365 is a yellowish, clear non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT® 365 improves substrate and pigment we...view more METOLAT® 365 is a yellowish, clear non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT® 365 improves substrate and pigment wetting. It shows a very broad pH stability. view less | |
| Water Base Acrylic Latex (Formulation #X 6030) | ICL Phosphate Specialty | Water-based Anti-Corrosive Paint using HALOX® 430 | |
| Water Reducible Epoxy Ester Primer (Formulation #70BG) | ICL Phosphate Specialty | Water Reducible Epoxy Ester Primer using HALOX® CW-491 | |
| High Gloss D.T.M. Water Base Acrylic (Formulation #2504) | ICL Phosphate Specialty | High Gloss DTM Water-based Acrylic using HALOX® 550 | |
| CELLOSIZE™ QP 52000H | Univar Solutions | CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-join...view more CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-joint compounds. view less | Request Sample |
| EMULTROL DFM OLM-17 | Concentrol, S.A., Productos | EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits ...view more EMULTROL DFM OLM-17 is a mineral oil defoamer for water borne applications. It is specially recommended for systems with good emulsifying properties, such as surfactant stabilized emulsions and emulsion paint. Its long term foam inhibition effect permits usage of a single dose. view less | |
| Pangel M100 | Tolsa SA | Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, em...view more Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, emulsion paints, textural paints, and bituminous emulsion. view less | |
| BECKOPOX™ EM 2120w/45WA | Allnex | BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorros...view more BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. view less | Request Sample |
| HYDRO PLIOLITE™ 211 | Synthomer | HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO...view more HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO PLIOLITE™ 211 is designed for intumescent coatings for fire protection from R30 to R120. view less | |
| UROTUF® F108-T8W-45 | Polynt Composites | UROTUF® F108-T8W-45 is a high solids, anionic stabilized, low VOC and NMP free water-borne oil modified urethane polymer provided at 45% solids in a blend of tripropylene glycol mono methyl ether (TPM) and water. It can be formulated into low VOC varnishe...view more UROTUF® F108-T8W-45 is a high solids, anionic stabilized, low VOC and NMP free water-borne oil modified urethane polymer provided at 45% solids in a blend of tripropylene glycol mono methyl ether (TPM) and water. It can be formulated into low VOC varnishes <100 g/L with the addition of metallic drier. view less | |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...view more Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. view less | Request Sample |
| 2 Pack Water Base Epoxy Anti-Corrosion Primer (Formulation #2106) | ICL Phosphate Specialty | 2-Pack Water-based Epoxy Primer using HALOX® SW-111 | |
| Nubirox 106 in Water Based DTM Alkyd System (Formulation #AA 19668) | Ferro Pigments | This water based DTM alkyd system features Nubirox 106 & Nubirox FR-10. | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...view more DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. view less | |
| High Performance 2K Water Base Acrylic/Epoxy (Formulation #AE-58) | ICL Phosphate Specialty | High Performance 2K Water-Based Acrylic/Epoxy using HALOX® CW-491 | |
| RHEOLATE® 101 | Elementis | RHEOLATE® 101 is an economical and versatile product in powder form for a variety of water-borne systems. It is used as an additive and is chemically identical to the active component in RHEOLATE® 1 rheological additive. Its dry powder form is easier to s...view more RHEOLATE® 101 is an economical and versatile product in powder form for a variety of water-borne systems. It is used as an additive and is chemically identical to the active component in RHEOLATE® 1 rheological additive. Its dry powder form is easier to store and is non-freezing. RHEOLATE® 101 is easily incorporated dry as a powder in the mill- base or as a pregel in water. view less | Request Sample |
| UCECOAT® 7520 | Allnex | UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCEC...view more UCECOAT® 7520 is a Sn-free, VOC free, aliphatic polyurethane acrylate dispersion. It has an excellent water release and is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT® 7520 can be used as the sole formulation resin or in combination with other water-borne resins. view less | Request Sample |
| AQUACER® 531 | BYK | AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...view more AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. view less | Request Sample |
| Polyplate® P01 | KaMin Solutions | Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel h...view more Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel holdout, and crack resistance. view less | Request Sample |
| Corrosperse 176E | WPC Technologies, Inc. | Corrosperse 176E is a yellow paste that is a 65% dispersion of Strontium Chromate in Glycol Ether EB. This product has a total solids content of 67-72% and a specific gravity of 1.8-2.0 g/cm3. It is most commonly used as a pigment in solvent and water-bor...view more Corrosperse 176E is a yellow paste that is a 65% dispersion of Strontium Chromate in Glycol Ether EB. This product has a total solids content of 67-72% and a specific gravity of 1.8-2.0 g/cm3. It is most commonly used as a pigment in solvent and water-borne primer applications. view less | |
| One Coat Water Base Acrylic Modified with Epoxy Ester (Formulation #XK-62/WE-237) | ICL Phosphate Specialty | One Coat Water-based Acrylic Modified with Epoxy Ester using HALOX® SZP-391 | |
| High Solids Zinc Free Water Base Primer (Formulation #XK 87) | ICL Phosphate Specialty | High Solids Zinc-Free Water-based Primer using HALOX® 430 & HALOX® 570 | |
| PEL-SIL CL290 | Ele Corporation | PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip and mar esistance and reducing friction coefficient for solvent-borne, water-born...view more PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip and mar esistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks. view less | |
| Aptalon™ M8100 | Lubrizol Advanced Materials, Inc. | Aptalon™ M8100 is a water-borne, self-crosslinking polyurethane dispersion using patented polyamide polyol technology. This resin chemistry provides excellent hydrolysis resistance, hardness, and chemical resistance that outperforms typical waterborne pol...view more Aptalon™ M8100 is a water-borne, self-crosslinking polyurethane dispersion using patented polyamide polyol technology. This resin chemistry provides excellent hydrolysis resistance, hardness, and chemical resistance that outperforms typical waterborne polyurethane chemistries. Aptalon M8100 is a 1K dispersion designed for high performance metal applications. This product will meet the performance properties of many 2K solvent-borne finishes without the need for external cross-linkers. Aptalon M8100 has no intentionally added NMP, NEP, and APEO which allows for global formulation compliance. view less | |
| DARVAN® 670L | Vanderbilt Minerals, LLC | DARVAN® 670L is a liquid anionic dispersing agent for the preparation of aqueous dispersions of colored pigments, dyes, extender pigments, etc. that are used in the manufacture of water-borne paints and coatings. This product is effective for viscosity re...view more DARVAN® 670L is a liquid anionic dispersing agent for the preparation of aqueous dispersions of colored pigments, dyes, extender pigments, etc. that are used in the manufacture of water-borne paints and coatings. This product is effective for viscosity reduction of high solids dispersions of red iron oxide and similar pigments. view less | Request Sample |
| Siltech® C-204 | Siltech Corp. | Siltech® C-204 is a modified silicone glycol copolymer additive that is supplied at a 52% concentration in diproplylene glycol monomethylether. It is used in water-borne coatings and ink formulations to provide rapid substrate wetting as well as improved ...view more Siltech® C-204 is a modified silicone glycol copolymer additive that is supplied at a 52% concentration in diproplylene glycol monomethylether. It is used in water-borne coatings and ink formulations to provide rapid substrate wetting as well as improved flow and leveling. It does not affect the re-coatability of the surface. view less | |
| TROYKYD® D472 | Arxada – Troy Corporation | Troykyd® D472 is a silicone-free liquid defoamer formulated for stability in higher pH (above 9) water-borne systems. USE Troykyd®D472 has been developed for applications where higher pH can cause the loss of defoaming efficiency over time. | Request Sample |
| Aptalon™ W8060 | Lubrizol Advanced Materials, Inc. | Aptalon™ W8060 is a water-borne, self-crosslinking polyurethane dispersion using patented AptalonTM polyamide polyol technology. Aptalon W8060 is designed for high performance wood flooring applications. Aptalon W8060 is NMP, NEP, and APEO free which allo...view more Aptalon™ W8060 is a water-borne, self-crosslinking polyurethane dispersion using patented AptalonTM polyamide polyol technology. Aptalon W8060 is designed for high performance wood flooring applications. Aptalon W8060 is NMP, NEP, and APEO free which allows for globally compliant formulations. Coating formulations made with Aptalon technology are designed to deliver very high performance properties in a 1 component system. Patented Aptalon backbone chemistry gives the resin hydrolysis resistance, hardness, and chemical resistance that out performs other waterborne polyurethane chemistries. Formulated Aptalon W8060 has performance matching or exceeding a 2K water-borne finish without the need for external cross-linkers. view less | |
| Kamin® 2000C | KaMin Solutions | Kamin® 2000C is KaMin's highest brightness, finest particle size, calcined kaolin clay. It has high oil absorption and water demand. It incorporates readily into solvent and water-borne coatings and inks, where it imparts sheen control and maximum TiO2 ex...view more Kamin® 2000C is KaMin's highest brightness, finest particle size, calcined kaolin clay. It has high oil absorption and water demand. It incorporates readily into solvent and water-borne coatings and inks, where it imparts sheen control and maximum TiO2 extension, tint strength, and brightness (whiteness). Its typical uses include inks and flat architectural coatings. view less | Request Sample |
| Kamin® 70C | KaMin Solutions | Kamin® 70C is a high brightness, medium particle size, calcined kaolin. It has moderate oil absorption and water demand. Kamin® 70C incorporates readily into solvent and water-borne coatings, where it imparts TiO2 extension, brightness (whiteness), scrub ...view more Kamin® 70C is a high brightness, medium particle size, calcined kaolin. It has moderate oil absorption and water demand. Kamin® 70C incorporates readily into solvent and water-borne coatings, where it imparts TiO2 extension, brightness (whiteness), scrub resistance and sheen control. It is the workhorse of the industry with typical uses in flat and low sheen architectural coatings. view less | Request Sample |
| CYMEL® 1156 | Allnex | CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction...view more CYMEL® 1156 resin is a highly butylated melamine resin developed for use in both water-borne and organo-soluble systems. It is very hydrophobic in nature, which makes it an excellent choice for internal can coating applications where good water extraction resistance is desired. Its excellent throwing power and migration efficiency makes this product suitable for anodic electrodeposition coatings. view less | Request Sample |
| Tytan AQ5000 (Water-borne Titanate Adhesion Promoter) | Borica Co., Ltd. | Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the performance when the water content is increased in the system. Tytan AQ5000 can be used as an adhesion promoter or cross linking agent for water-born...view more Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. This product is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT without sacrificing the performance when the water content is increased in the system. Tytan AQ5000 can be used as an adhesion promoter or cross linking agent for water-borne coatings in acid environments on various surfaces. view less | |
| Nubirox 302 in Water Based DTM Alkyd System (Formulation #AA 19670) | Ferro Pigments | This water based DTM alkyd system features Nubirox 302. | |
| High Performance 2K Water Base Acrylic/Epoxy (Formulation #AE-58/3510-W60) | ICL Phosphate Specialty | High Performance 2K Water-based Acrylic/Epoxy using HALOX® CW-491 and SHIELDEX® AC5 Synergy | |
| 2K Waterborne Polyurethane (Formulation #VP 2235 1) | ICL Phosphate Specialty | 2K Water-based Polyurethane using HALOX® SZP-391 | |
| Low VOC Water Reducible Alkyd Latex Primer (Formulation #AQ-210) | ICL Phosphate Specialty | Low VOC Water Reducible Medium Oil Alkyd Latex using HALOX® SZP-391 and HALOX® 570 Synergy | |
| ADDITOL® dry CF103 | Allnex | ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (W...view more ADDITOL® Dry CF103 is a cobalt free (Co-free) accelerated primary drier based on Manganese (Mn). High performance set and through drying in alkyd paints, stains, natural oils and printing inks. Universal compatible in solvent borne (SB) and water based (WB) oxidative drying systems. Allows leveling without strong wrinkling tendency. Solvent free, ultra low VOC, high flash point (FP) for high handling safety. Long lasting drying performance with strongly reduces loss of dry effect. view less | Request Sample |
| Addivanace® AD802 | Human Chemicals Co., Ltd. | Addivanace® AD802 is a amorphous silica appearing as white free flowing powder. It has such unique properties like excellent transparency and mattability, which makes it suitable for all kinds of matt coating requiring high mattability and transparency, especially for 2KPU system as well as water-born...view more Addivanace® AD802 is a amorphous silica appearing as white free flowing powder. It has such unique properties like excellent transparency and mattability, which makes it suitable for all kinds of matt coating requiring high mattability and transparency, especially for 2KPU system as well as water-borne system. view less | |
| ACRYSOL™ RM-1020 | Univar Solutions | ACRYSOL™ RM-1020 is a low solids, ammonium polyacrylate solution which has been designed as a thickening agent for water borne paints, offering easy handling and addition during paint manufacture. It offers improvement in flow and leveling performance com...view more ACRYSOL™ RM-1020 is a low solids, ammonium polyacrylate solution which has been designed as a thickening agent for water borne paints, offering easy handling and addition during paint manufacture. It offers improvement in flow and leveling performance compared to paints using cellulosic thickeners. view less | Request Sample |
| Ez Gel W 16 | Eagle Specialty Products | Ez Gel W 16 is a water/PG-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel W 16 is most commonly used in solvent-borne coating system applica...view more Ez Gel W 16 is a water/PG-based, non-yellowing, multifunctional, treated mineral in a gel form. This product provides anti-settling and sag control with minimal impact on viscosity. Ez Gel W 16 is most commonly used in solvent-borne coating system applications. view less | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...view more NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. view less |
