| Abrasion Scrub Tester | BYK-Gardner USA | Coated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, or other means. The Wet Abrasion Tester produces a repeatable, controlled condition to simulate everyday use or wear patterns. |  |
| AquaPi - Portable Tensiometer | Kibron Inc. | The Kibron AquaPi is the first battery operated and portable tensiometer, rugged enough for field operations and on-site measurements. With AquaPi you can measure surface tension easily and rapidly, practically anywhere. It offers fast, automated measurem...view more The Kibron AquaPi is the first battery operated and portable tensiometer, rugged enough for field operations and on-site measurements. With AquaPi you can measure surface tension easily and rapidly, practically anywhere. It offers fast, automated measurement, which makes it handy for basic research in surface chemistry. This instrument is ideal for checking washing process results and water quality and environmental monitoring. view less |  |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...view more ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. view less |  |
| Auto-Match® III Sensor | BYK-Gardner USA | The last thing a paint department wants to worry about is a broken down color matching system. Therefore the Auto-Match® III Sensor has an extremely rugged and reliable design guaranteeing a maintenance-free operation for years. |  |
| Balanced Beam Scrape Adhesion And Mar Tester | BYK-Gardner USA | Balanced Beam Scrape Adhesion And Mar Tester is used to perform scrape adhesion and mar resistance (scratch hardness) tests of coatings and surfaces of various materials. |  |
| Bubble Viscometers | BYK-Gardner USA | BYK-Gardner bubble viscometers are used to quickly determine kinematic viscosity of known liquids such as resins and varnishes. |  |
| Buchholz Indentation Test | BYK-Gardner USA | The Buchholz indentation test is a reliable test method for evaluation of indentation resistance of plastic deformable coatings. |  |
| BYK LC 4 | BYK-Gardner USA | Conductivity meters for water based coatings systems. LC 4 handheld conductivity meter with touch-screen, easy to-use, rugged design. |  |
| BYK-mac | BYK-Gardner USA | Total color impression of effect finishes: The appearance of effect finishes is influenced by different viewing angles and viewing conditions. Apart from a light-dark flop and color shift special sparkling effects can be created. The BYK-mac spectrophoto...view more Total color impression of effect finishes: The appearance of effect finishes is influenced by different viewing angles and viewing conditions. Apart from a light-dark flop and color shift special sparkling effects can be created. The BYK-mac spectrophotometer is unique as it measures both multiangle color and flake characterization in one portable device. view less |  |
| BYK-mac COLOR | BYK-Gardner USA | Multi-angle color measurement: In order to control the lightness and / or color flop of an effect finish, the color needs to be measured under different viewing angles. BYK-mac COLOR spectrophotometer offers an attractive solution. |  |
| BYK-mac ROBOTIC | BYK-Gardner USA | BYK-mac ROBOTIC allows automated total color control as it is mounted on a robotic arm. Products can only be manufactured with uniform and consistent quality when process stability is guaranteed. Therefore, multi-angle color, sparkle, and graininess must ...view more BYK-mac ROBOTIC allows automated total color control as it is mounted on a robotic arm. Products can only be manufactured with uniform and consistent quality when process stability is guaranteed. Therefore, multi-angle color, sparkle, and graininess must be measured on a routine basis. The robotic system not only measures a high number of cars, but also on the same areas. view less |  |
| BYK-mac Small Aperture | BYK-Gardner USA | Special effect finishes are used in many applications to create new color impressions emphasizing the design of a product. Objects like mobile phone housings, bicycles or window handles are very small or curved. They require a color instrument with small ...view more Special effect finishes are used in many applications to create new color impressions emphasizing the design of a product. Objects like mobile phone housings, bicycles or window handles are very small or curved. They require a color instrument with small aperture and repeatable sample placement. The BYK-mac with 12 mm aperture guarantees repeatable results even on such products. view less |  |
| BYKO-Charts | BYK-Gardner USA | BYK-Gardner offers a wide range of drawdown cards and charts for virtually any application and coating material. Test charts are easy to use and an inexpensive substrate to test a variety of coating properties, such as opacity, spreading rate, penetrat...view more BYK-Gardner offers a wide range of drawdown cards and charts for virtually any application and coating material. Test charts are easy to use and an inexpensive substrate to test a variety of coating properties, such as opacity, spreading rate, penetration behavior, and flow and leveling behavior. They are used for testing architectural, industrial, automotive, wood finishes or even cosmetic products (e.g. nail polish). view less |  |
| BYKO-Cut Universal | BYK-Gardner USA | BYKO-Cut Universal is a portable instrument providing sufficient accuracy for laboratory use but also usable at construction sites and in workshops. It is ideal for customer service technicians and demonstrations. This is a universal instrument for measur...view more BYKO-Cut Universal is a portable instrument providing sufficient accuracy for laboratory use but also usable at construction sites and in workshops. It is ideal for customer service technicians and demonstrations. This is a universal instrument for measuring film thickness in the range of 2-2000 μm, adhesion test by means of cross-cut test, indentation hardness, and microscopic research for pores, pits, cracks, blisters, flaking, intercoat adhesion of the individual film in coat systems, and quality control of the pretreatment of the substrate. view less |  |
| BYKO-Spectra | BYK-Gardner USA | Colors appear differently under different lighting conditions. Use of a light booth to simulate different lighting conditions helps to obtain objective color assessment, improves communication and reduces product rejections. BYK-Gardner offers a complete ...view more Colors appear differently under different lighting conditions. Use of a light booth to simulate different lighting conditions helps to obtain objective color assessment, improves communication and reduces product rejections. BYK-Gardner offers a complete line of light booths which allow you to see what your product will look like – independent of location and environmental influences. For critical color evaluation, the BYKO-Spectra light booth offers every option and feature that is needed to evaluate and communicate color with absolute confidence. view less |  |
| BYKO-Spectra Basic | BYK-Gardner USA | For general color evaluation under defined lighting conditions, the BYKO-Spectra Basic light booth offers several benefits. It allows for the comparison of standard and sample in a color-neutral environment, and offers three different controlled light sou...view more For general color evaluation under defined lighting conditions, the BYKO-Spectra Basic light booth offers several benefits. It allows for the comparison of standard and sample in a color-neutral environment, and offers three different controlled light sources: daylight, incandescent light, and department store light. It is easy to operated by using individual switches for each light source, can be set up in minutes without any tools, and allows for economical testing of large samples in a compact design - for laboratory and production. view less |  |
| BYKO-Spectra Effect | BYK-Gardner USA | Effect finish appearance is influenced by different viewing angles and viewing conditions. With BYK-Gardner’s new BYKO-Spectra Effect light booth, it is now possible to control both parameters to ensure objective evaluation of the total color impression o...view more Effect finish appearance is influenced by different viewing angles and viewing conditions. With BYK-Gardner’s new BYKO-Spectra Effect light booth, it is now possible to control both parameters to ensure objective evaluation of the total color impression of effect finishes. This helps to improve communication and reduce product rejections. view less |  |
| BYKO-Spectra Mini | BYK-Gardner USA | For general color evaluation of small samples the BYKO-Spectra Mini light booth offers several benefits. It allows for comparison of standard and sample in a color-neutral environment, and three different controlled light sources: daylight, incandescent l...view more For general color evaluation of small samples the BYKO-Spectra Mini light booth offers several benefits. It allows for comparison of standard and sample in a color-neutral environment, and three different controlled light sources: daylight, incandescent light, and department store light. It is easy to operate, has a quick set up, and allows for economical testing of small samples due to its compact design. view less |  |
| BYKO-test 4200/4500 | BYK-Gardner USA | The byko-test 4500 film thickness gauge allows for the measurement of a variety of products. No cable exchange or calibration is needed when changing from a ferrous to a non-ferrous substrate. The large LCD display and 10 second retention of the last meas...view more The byko-test 4500 film thickness gauge allows for the measurement of a variety of products. No cable exchange or calibration is needed when changing from a ferrous to a non-ferrous substrate. The large LCD display and 10 second retention of the last measured value makes the byko-test 4500 easy to use. view less |  |
| BYKO-test 8500 | BYK-Gardner USA | The byko-test 8500 film thickness gauge has a modular design to accommodate a wide range of applications. Multiple sensor probes are available for maximun flexibility. Coating thickness can be measured on a wide variety of metal substrates: iron, steel, c...view more The byko-test 8500 film thickness gauge has a modular design to accommodate a wide range of applications. Multiple sensor probes are available for maximun flexibility. Coating thickness can be measured on a wide variety of metal substrates: iron, steel, copper, aluminum, zinc, brass, and titanium. view less |  |
| BYKO-test MP0R | BYK-Gardner USA | The byko-test MP0R film gage allows quick and easy measurements of coatings thickness on ferrous and non-ferrous substrates. The instrument automatically identifies the kind of substrate and selects the appropriate test method accordingly. The instrument...view more The byko-test MP0R film gage allows quick and easy measurements of coatings thickness on ferrous and non-ferrous substrates. The instrument automatically identifies the kind of substrate and selects the appropriate test method accordingly. The instrument is designed for one-hand operation. An integrated spring guarantees a constant pressure of the probe to the sample's surface. The instrument comes with an integrated radio transmitter. For wireless transmission of the measured values directly to a PC, the optional radio receiver and software is necessary. view less |  |
| CAMSIZER® - Dynamic Image Analysis System Particle Size | HORIBA Instruments, Inc. | CAMSIZER® features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 30µm to 30mm. 100% higher resolution. It has a new LED-stroboscope light source ...view more CAMSIZER® features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 30µm to 30mm. 100% higher resolution. It has a new LED-stroboscope light source with 20 times higher intensity. It provides extreme depth of sharpness and improved shape and size analysis across the entire measuring range. CAMSIZER® has an optimized, process oriented software, excellent compatibility to sieve analysis it is easy to reproduce and there are several language versions.Typical examples of applications for CAMSIZER® are: Salt/sugar, Sand, Polystyrene, Plastics, Carbon black/coal, Glass/ceramics, Catalysts, Coffee, Fertilisers, Abrasives, Refractory products, Drugs, Carbon products, Foodstuffs and Metal powder. view less |  |
| CAMSIZER XT - Dynamic Image Analysis System Particle Size | HORIBA Instruments, Inc. | CAMSIZER XT features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and wet dispersions in the size range from 1µm to 3mm. It performs high resolution for narrow, mono-modal distributions...view more CAMSIZER XT features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and wet dispersions in the size range from 1µm to 3mm. It performs high resolution for narrow, mono-modal distributions, excellent dynamic measurement range for broad distributions or multi-modal samples and reliable detection of smallest amounts (< 0.1 %) of “oversize” particles. It also performs particle shape analysis (e. g. aspect ratio, symmetry or roundness for detection of agglomerates, broken particles or contaminations). CAMSIZER XT is ideal for granules and fine pellets, pulverized and granulated food, detergent powder and raw materials, plastic powders (also with electrostatic charge) metal and ore powders, abrasives (medium-sized and small grit), fine sands and cement, fine wood fibers and fine plastic fibers view less |  |
| Cloud-Runner | BYK-Gardner USA | Control and guarantee a uniform finish - no more mottling! Mottling disturbes the overall color harmony of effect finishes. These irregular lightness variations can now be objectively measured with BYK-Gardner's newest innovation: the cloud-runner simulat...view more Control and guarantee a uniform finish - no more mottling! Mottling disturbes the overall color harmony of effect finishes. These irregular lightness variations can now be objectively measured with BYK-Gardner's newest innovation: the cloud-runner simulates visual evaluation under different observing angles and characterizes clouds / mottles by their size and visibility. view less |  |
| Color-Guide | BYK-Gardner USA | Keyboards, pens and window handles require a color instrument with a very small aperture and a repeatable sample placement. Color-Guide 45/0, 4 mm aperture together with the optional sample holder guarantee repeatable results and a convenient sample place...view more Keyboards, pens and window handles require a color instrument with a very small aperture and a repeatable sample placement. Color-Guide 45/0, 4 mm aperture together with the optional sample holder guarantee repeatable results and a convenient sample placement. view less |  |
| Color-Guide Plus | BYK-Gardner USA | Color-Guide Plus - the Electronic Fandeck! Instead of spending hours searching through hundreds of fandeck colors trying to match your customer's sample, why not get your answer in less than a second with the color-guide plus? |  |
| Color-View | BYK-Gardner USA | The Color-View spectrophotometer is a highly reliable 45/0 instrument with circumferential illumination. It is designed to measure rough, directional surfaces, pellets or powdered materials like plastic concentrates and resins, and smooth uniform surfaces...view more The Color-View spectrophotometer is a highly reliable 45/0 instrument with circumferential illumination. It is designed to measure rough, directional surfaces, pellets or powdered materials like plastic concentrates and resins, and smooth uniform surfaces like paint drawdowns and sprayouts, all with the same degree of certainty. view less |  |
| Cone and Plate Viscometer | BYK-Gardner USA | The versatility of the CAP 1000+ and CAP 2000+ makes these instruments a practical tool for any QC or R&D lab requiring quick and easy testing of materials, regardless of application, at high shear rates. |  |
| Conical Mandrel Tester | BYK-Gardner USA | Bending coated sheet metal over a defined radius is an indicator of the elongation and adhesion of a paint film at bending stress. BYK-Gardner offers two types of mandrel bending testers – a cylindrical mandrel and a conical mandrel. |  |
| "Coverall" Bend And Impact Tester | BYK-Gardner USA | "Coverall" Bend And Impact Tester is used to test both flexibility and impact resistance. By simply reversing the impacter, the instrument can evaluate the flexibility of can-stock coating during double seaming and to test its impact resistance in handlin...view more "Coverall" Bend And Impact Tester is used to test both flexibility and impact resistance. By simply reversing the impacter, the instrument can evaluate the flexibility of can-stock coating during double seaming and to test its impact resistance in handling. view less |  |
| Cross-Cut Tester Kit | BYK-Gardner USA | Cross-Cut Tester Kits are available in 2 different blade versions, one is a multi-cut blade with 6 cutting edges, the other version has one cutting edge. The Cross-Cut Tester blades are made of hardened steel alloy. The blades are designed for retaining a...view more Cross-Cut Tester Kits are available in 2 different blade versions, one is a multi-cut blade with 6 cutting edges, the other version has one cutting edge. The Cross-Cut Tester blades are made of hardened steel alloy. The blades are designed for retaining a sharp cutting edge and reduce the frequency of blade replacement. view less |  |
| Cupping Tester | BYK-Gardner USA | The BYK-Gardner cupping tester has been designed for determining the elongation and deformability of single- and multiple-layer systems on metal substrates. It has an electrohydraulic drive for highly reproducible results, an easy-to-use eccentric clampin...view more The BYK-Gardner cupping tester has been designed for determining the elongation and deformability of single- and multiple-layer systems on metal substrates. It has an electrohydraulic drive for highly reproducible results, an easy-to-use eccentric clamping ring, and the C-opening accepts large and small test panels. view less |  |
| Cylindrical Mandrel Tester | BYK-Gardner USA | Bending coated sheet metal over a defined radius is an indicator of the elongation and adhesion of a paint film at bending stress. BYK-Gardner offers two types of mandrel bending testers – a cylindrical mandrel and a conical mandrel. |  |
| Delta Color Comparator | BYK-Gardner USA | The BYK-Gardner Delta Color Comparator uses precision polished opticalglass filters as reference standards. Two different models are available: with or without illumination. The rugged design of this instrument allows the color comparator to be used at a...view more The BYK-Gardner Delta Color Comparator uses precision polished opticalglass filters as reference standards. Two different models are available: with or without illumination. The rugged design of this instrument allows the color comparator to be used at any location, and easy operation allows anyone to determine Gardner Color Numbers. The optional illuminator allows back-light color to improve viewing conditions. view less |  |
| Delta-8 - High Throughput Surface Tension Plate Reader | Kibron Inc. | Delta-8 - High Throughput Surface Tension Plate Reader represents a true breakthrough, making high throughput screening possible in surface chemistry, from critical micelle concentration measurement to advanced drug discovery. It can be made more than 100...view more Delta-8 - High Throughput Surface Tension Plate Reader represents a true breakthrough, making high throughput screening possible in surface chemistry, from critical micelle concentration measurement to advanced drug discovery. It can be made more than 100 times faster compared to conventional methods, with minimal sample consumption. For chemical industries, including surfactant/detergent suppliers and users, Delta-8 is a revolutionary platform for cost-efficient product optimization. view less |  |
| DeltaPi - Langmuir Tensiometer | Kibron Inc. | DeltaPi single channel Langmuir tensiometer is designed for the measurement of binding of drugs, peptides, and proteins to lipid membranes. It monitors enzyme action on monolayers, and measures ligand/lipid interactions and dynamic surface tension. This p...view more DeltaPi single channel Langmuir tensiometer is designed for the measurement of binding of drugs, peptides, and proteins to lipid membranes. It monitors enzyme action on monolayers, and measures ligand/lipid interactions and dynamic surface tension. This product also determines the surface activity and CMC of drugs and the complex formation by nucleic acids and cationic lipids. view less |  |
| DeltaPi-4 - Langmuir Tensiometer | Kibron Inc. | DeltaPi 4-channel Langmuir tensiometer is designed for the measurement of binding of drugs, peptides, and proteins to lipid membranes. It monitors enzyme action on monolayers, and measures ligand/lipid interactions and dynamic surface tension. This produc...view more DeltaPi 4-channel Langmuir tensiometer is designed for the measurement of binding of drugs, peptides, and proteins to lipid membranes. It monitors enzyme action on monolayers, and measures ligand/lipid interactions and dynamic surface tension. This product also determines the surface activity and CMC of drugs and the complex formation by nucleic acids and cationic lipids. view less |  |
| Density Cups | BYK-Gardner USA | BYK-Gardner Density Cups use a cylindrical shape which provides a large opening for easy filling, emptying, and cleaning. The tightly fitted stainless steel covers have an upward slope to a small hole in the center to allow excess sample material to be ex...view more BYK-Gardner Density Cups use a cylindrical shape which provides a large opening for easy filling, emptying, and cleaning. The tightly fitted stainless steel covers have an upward slope to a small hole in the center to allow excess sample material to be expelled without entrapping air bubbles, which increases accuracy. view less |  |
| Diffusing Wave Spectroscopy | Formulaction Inc. | Multi Speckle-Diffusing Wave Spectroscopy (MS-DWS) is the key light scattering method which measures the mobility of particles in a media. | |
| Dift-2X | Kibron Inc. | Kibron Dift-2X is a stopped flow tensiometer. It revolutionizes the way dynamic interfacional tension is measured. Utilizing Kibron's superior quality senors, it is capable of measuring 20 datapoints each second at a very high precision. Kibron Dift-2X co...view more Kibron Dift-2X is a stopped flow tensiometer. It revolutionizes the way dynamic interfacional tension is measured. Utilizing Kibron's superior quality senors, it is capable of measuring 20 datapoints each second at a very high precision. Kibron Dift-2X comes equipped with two microbalances, making the instrument capable of measuring over 100 hundred samples in just eight hours. view less |  |
| Digital KU-2 | BYK-Gardner USA | The Digital KU-2 viscometer provides a direct digital reading in Krebs units (KU), centipoise, and grams (gm). This simplifies an established test procedure providing an immediate calculation of the viscosity value. The viscometer automatically starts or ...view more The Digital KU-2 viscometer provides a direct digital reading in Krebs units (KU), centipoise, and grams (gm). This simplifies an established test procedure providing an immediate calculation of the viscosity value. The viscometer automatically starts or stops by lowering or raising the viscometer. The KU-2 automatically establishes the correct rotational speed to comply with ASTM method D 562. view less |  |
| DPM 100 | BYK-Gardner USA | The DPM 100 Digital Pocket Microscope offers varying magnification up to 200x suitable for most quality inspection work. The microscope features integrated LED illumination which can be turned on and off depending on the application. The DPM contains a hi...view more The DPM 100 Digital Pocket Microscope offers varying magnification up to 200x suitable for most quality inspection work. The microscope features integrated LED illumination which can be turned on and off depending on the application. The DPM contains a high-resolution color camera which provides crisp, clear images. To capture an image simply press the red button on the microscope. The microscope can be used for many applications, such as print quality, paper structure, coatings, textiles, and plastics. view less |  |
| Drying Time Recorder | BYK-Gardner USA | BYK-Gardner offers the versatile BK Drying Time Recorder to help quantify the various stages of film curing and drying, deliver reproducible results, and guarantee highest efficiency. The various stages of drying and curing that occur in films are easy t...view more BYK-Gardner offers the versatile BK Drying Time Recorder to help quantify the various stages of film curing and drying, deliver reproducible results, and guarantee highest efficiency. The various stages of drying and curing that occur in films are easy to detect but difficult to define in terms of chemical and physical principles. In order to evaluate them objectively it is necessary to use instrumentation under controlled conditions. view less |  |
| DT-1201 - Acoustic & Electroacoustic Spectrometer For Particle Size Analysis And Zeta Potential | HORIBA Instruments, Inc. | DT-1201 - Acoustic & Electroacoustic Spectrometer uses acoustic and electroacoustic spectrometry to measure both particle size and zeta potential in very concentrated suspensions (up to 50 vol%) over a size range of 5nm-100µm. Acoustic measurements provid...view more DT-1201 - Acoustic & Electroacoustic Spectrometer uses acoustic and electroacoustic spectrometry to measure both particle size and zeta potential in very concentrated suspensions (up to 50 vol%) over a size range of 5nm-100µm. Acoustic measurements provide a wealth of information beyond particle size and zeta potential. For well developed applications, acoustic parameters can be correlated to other product variables. It's advantages over light based techniques include: no dilution needed the sample is measured in native state, it is much less sensitive to contamination, there is no calibration needed, higher precision and wide size range from 5nm to 100 microns. DT-1201 measures sound attenuation and velocity of any fluid like material, gels and milk, for example. view less |  |
| DUR-O-TEST | BYK-Gardner USA | This pocket instrument allows hardness tests on flat and curved surfaces. The instrument consists of a sleeve with a pressure spring that can be bent to various tensions by using a slide. The spring acts on a tungsten carbide needle with its tip extending...view more This pocket instrument allows hardness tests on flat and curved surfaces. The instrument consists of a sleeve with a pressure spring that can be bent to various tensions by using a slide. The spring acts on a tungsten carbide needle with its tip extending out of the sleeve. A locking screw fixes the slide, thus maintaining constant spring tension. view less |  |
| DV-E Rotational Viscometer | BYK-Gardner USA | DV-E Rotational Viscometer has simplified controls, which allow operators to change test parameters quickly with the push of a switch and turn of a knob. The digital display ensures easy and accurate readout of results for simultaneous measurements of vis...view more DV-E Rotational Viscometer has simplified controls, which allow operators to change test parameters quickly with the push of a switch and turn of a knob. The digital display ensures easy and accurate readout of results for simultaneous measurements of viscosity and torque. view less |  |
| Easy-Link | BYK-Gardner USA | Easy-Link is a software that helps document measurement results. It offers easy and direct data transfer from the instrument to Excel®, and QC templates prepared in Excel® allow you to create professional QC reports. All the data is summarized in one easy...view more Easy-Link is a software that helps document measurement results. It offers easy and direct data transfer from the instrument to Excel®, and QC templates prepared in Excel® allow you to create professional QC reports. All the data is summarized in one easy-to-read report: gloss, thickness, color, and specific product information. In addition, the software is expandable, so modification can be made easily when new requirements are established. view less |  |
| EZ-Pi Plus Tensiometer | Kibron Inc. | EZ-Pi Plus is a new single channel tensiometer. EZ-Pi Plus's full potential comes into action when pairing it up with a laptop. It is light-weight, robust and well suited for on-site measurements. You can use both du Noüy and Wilhelmy technique, using the...view more EZ-Pi Plus is a new single channel tensiometer. EZ-Pi Plus's full potential comes into action when pairing it up with a laptop. It is light-weight, robust and well suited for on-site measurements. You can use both du Noüy and Wilhelmy technique, using the same probe. The cuvette holder can be temperature controlled with an external water bath. Kibron EZ-Pi plus was designed and built with reliability and ease of use in mind. It is a compact size, yet robust and rugged to provide users highest quality data anywhere, anytime. State-of-the-art sensor technology and intuitive user interface makes it a true winner. view less |  |
| Fineness Of Grind Gages | BYK-Gardner USA | The Fineness of Grind Gage is used to indicate the fineness of grind or the presence of coarse particles or agglomerates in a dispersion. It does not determine particle size or particle size distribution. Grind gages are used in controlling the production...view more The Fineness of Grind Gage is used to indicate the fineness of grind or the presence of coarse particles or agglomerates in a dispersion. It does not determine particle size or particle size distribution. Grind gages are used in controlling the production, storage, and application of dispersion products produced by milling in the paint, plastic, pigment, printing ink, paper, ceramic, pharmaceutical, food, and many other industries. view less |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...view more FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. view less |  |
| Gardner Impact Tester Automatic Lift System | BYK-Gardner USA | Gardner Impact Tester Automatic Lift System features a pneumatically powered system added to the standard manual Gardner impact tester to relieve the operator of repetitive lifting of the drop weight and improve the repeatability of the test. This system ...view more Gardner Impact Tester Automatic Lift System features a pneumatically powered system added to the standard manual Gardner impact tester to relieve the operator of repetitive lifting of the drop weight and improve the repeatability of the test. This system is especially helpful where large 8 and 16 pound weights are used. By using a mechanical stop, the test is made more repeatable by eliminating any variation in the drop point by individuals releasing the weight by eye. view less |  |
| Gradient-Oven | BYK-Gardner USA | The Gradient-Oven is a test apparatus for evaluating the baking and drying behavior of liquid coatings, powder coatings, resins, and plastics. A production baking process can be simulated by programming heat-up speed, baking temperature and time. This ins...view more The Gradient-Oven is a test apparatus for evaluating the baking and drying behavior of liquid coatings, powder coatings, resins, and plastics. A production baking process can be simulated by programming heat-up speed, baking temperature and time. This instrument saves time and energy, generates various curing temperatures on one panel, and simulates the temperature profile of a production oven in the laboratory. view less |  |
| Haze-Gard Dual | BYK-Gardner USA | The Haze-Gard Dual objectively measures Total Transmittance and Transmission Haze according to two international specifications: ISO 13468 Compensation method and ASTM D1003 Noncompensated method. This instrument offers fast measurement of a variety of sa...view more The Haze-Gard Dual objectively measures Total Transmittance and Transmission Haze according to two international specifications: ISO 13468 Compensation method and ASTM D1003 Noncompensated method. This instrument offers fast measurement of a variety of samples and precise and reliable readings. view less |  |
| Haze-Gard Plus | BYK-Gardner USA | The Haze-Gard Plus quantifies the visual perception with objective measurement data. All essential criteria for transparency can be measured with one instrument: Total transmittance, Transmission haze, and See-through quality. |  |
| Haze-Gloss | BYK-Gardner USA | The haze meter was designed for the needs in the laboratory. Gloss, haze and mirror reflection can all be measured with one instrument for low to high gloss surfaces. It has a mirror reflection for materials with very high reflection capabilities, such as...view more The haze meter was designed for the needs in the laboratory. Gloss, haze and mirror reflection can all be measured with one instrument for low to high gloss surfaces. It has a mirror reflection for materials with very high reflection capabilities, such as metals. This instrument also has a reference beam, closed optics, and a self diagnosis guarantee for accurate quality control. view less |  |
| Heavy-Duty Impact Tester | BYK-Gardner USA | This impact tester has gained wide acceptance in testing the impact resistance of many types of coatings from paints to varnishes to tough plated, plastic or laminated coatings. It is also widely used to establish quality control standards for resistance ...view more This impact tester has gained wide acceptance in testing the impact resistance of many types of coatings from paints to varnishes to tough plated, plastic or laminated coatings. It is also widely used to establish quality control standards for resistance to impact surface damage and penetration of many construction materials including plastics, resins, fiberglass, sheet metals, and plywood. view less |  |
| HeliPath Stand | BYK-Gardner USA | The Helipath stand is designed to lower and raise the viscometer so that its rotating shearing element will describe a helical path through the test sample. By always cutting into fresh material the problem of separating is eliminated. The reversing featu...view more The Helipath stand is designed to lower and raise the viscometer so that its rotating shearing element will describe a helical path through the test sample. By always cutting into fresh material the problem of separating is eliminated. The reversing feature of the Helipath stand allows measurements to be made over a period of time. view less |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...view more High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. view less |  |
| Hoffman Scratch Hardness Tester | BYK-Gardner USA | The Hoffman Scratch Hardess Tester was developed for the comparative evaluation of scratch resistance and adhesion of many types of coatings. This instrument consists of a four-wheeled carriage, a scale arm graduated from 0-20 that is attached permanentl...view more The Hoffman Scratch Hardess Tester was developed for the comparative evaluation of scratch resistance and adhesion of many types of coatings. This instrument consists of a four-wheeled carriage, a scale arm graduated from 0-20 that is attached permanently to the carriage in a counterpoised condition about the pivot axis, and a scratch tool with a sharp circular rim mounted at 45° to the flat test surface. view less |  |
| ISO Impact Tester | BYK-Gardner USA | ISO Impact Tester is used for testing impact resistance of coatings on metal substrates. In accordance with ISO standard, the test panel is fixed on the die using a clamping device, so that the panel surface outside the test area is not affected by the ra...view more ISO Impact Tester is used for testing impact resistance of coatings on metal substrates. In accordance with ISO standard, the test panel is fixed on the die using a clamping device, so that the panel surface outside the test area is not affected by the rapid deformation caused by the falling weight. This instrument features an anodized guide tube with a scale in inches and mm, tolerance for ISO falling weights +/- 1g, and a maximum falling weight of 2 kg. It also has exchangeable falling weights and dies and can be easily converted for testing in accordance with ASTM. view less |  |
| LA-300 - Portable Routine Laser Diffraction Analyzer | HORIBA Instruments, Inc. | The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-30...view more The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-300's revolutionary size makes it a welcome change to the other large and cumbersome designs. It's real-time displays of particle size distribution and sample concentration let the user check sample at all times. Using a diode laser, the LA-300 measures particles ranging anywhere between 0.1 and 600 μm in diameter with unprecedented precision, and processes high-resolution data for display within 20 seconds. The wide measurable range makes it ideal for application in fundamental studies and quality control of production lines in such diverse fields as pharmaceuticals, fine ceramics, metal powders, polymers, pigments, paints/coatings, adhesives, catalysts, minerals and clays, just to name a few. view less |  |
| LA-950 - High Performance Laser Diffraction Analyzer | HORIBA Instruments, Inc. | LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different in...view more LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different industries. From ultra-fine nano-order particles to individually visible particles, all can be measured with this single instrument. Designed to handle the entire range of applications extending from the complex needs of research to routine quality control procedures, the LA-950 offers practicality as a"standard instrument" that is easy to use and enables precise measurement. LA-950 has a wide range of applications including: nano-level research and development, ceramics, pigments, battery materials, catalysts, cosmetics, pharmaceuticals and food products. view less |  |
| LCM III | BYK-Gardner USA | The LCM III is a reliable color instrument which replaces conventional visual color evaluation with an objective measurement. It is ideal for routine production control of clear, transparent liquids like resins, adhesives and solvents. This instrument fea...view more The LCM III is a reliable color instrument which replaces conventional visual color evaluation with an objective measurement. It is ideal for routine production control of clear, transparent liquids like resins, adhesives and solvents. This instrument features a large touch-screen display with intuitive user guidance for simple operation and automatic cuvette recognition, which helps avoid faulty data measurement. view less |  |
| LCS III | BYK-Gardner USA | The LCS III is a highly precise color instrument which spectrally measures all color shades of optically clear liquids. Besides the conventional visual color numbers (Gardner, Iodine, Hazen (APHA) etc.) the LCS can measure opponent color such as CIELab,...view more The LCS III is a highly precise color instrument which spectrally measures all color shades of optically clear liquids. Besides the conventional visual color numbers (Gardner, Iodine, Hazen (APHA) etc.) the LCS can measure opponent color such as CIELab, XYZ and Yxy under the conditions of illumiant C (daylight) and 2° Standard Observer. view less |  |
| Light-Duty Impact Tester | BYK-Gardner USA | The Light-Duty Impact Tester should be used with materials that can be damaged or penetrated by small impact forces such as products mildly abused in households, offices or labs through years of normal use. It measures impact resistance of plastics and ot...view more The Light-Duty Impact Tester should be used with materials that can be damaged or penetrated by small impact forces such as products mildly abused in households, offices or labs through years of normal use. It measures impact resistance of plastics and other materials. view less |  |
| Liquid Color Standards | BYK-Gardner USA | The BYK-Gardner Liquid Color Standard Comparator provides the entire BYK-Gardner Color Scale, against which a liquid sample can be visually compared. It has a rugged design for use in the laboratory and production, and offers quick and easy color quality ...view more The BYK-Gardner Liquid Color Standard Comparator provides the entire BYK-Gardner Color Scale, against which a liquid sample can be visually compared. It has a rugged design for use in the laboratory and production, and offers quick and easy color quality control of liquids. view less |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...view more Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. view less |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...view more MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. view less |  |
| Mechanical Cupping Tester | BYK-Gardner USA | The BYK-Gardner Mechanical Cupping Tester is designed to test the elongation and deformability of lacquers and protective coatings applied to metal substrates. The punch is applied under pressure to the uncoated side of the test panel. The panel is held i...view more The BYK-Gardner Mechanical Cupping Tester is designed to test the elongation and deformability of lacquers and protective coatings applied to metal substrates. The punch is applied under pressure to the uncoated side of the test panel. The panel is held in place by a clamping ring. Two test procedures can be performed the "Predetermined depth" (go/no go) or "Minimum depth required to cause failure". view less |  |
| Micro-Gloss | BYK-Gardner USA | The Micro-Gloss has been the unsurpassed industry standard in gloss measurement for many years. It is the only gloss meter combining highest accuracy, ease of use and multiple functionality - essential for today's testing requirements. |  |
| Micro-Haze Plus | BYK-Gardner USA | The Micro-Haze Plus measures gloss and haze in one measurement procedure. This handy hazemeter is the ideal solution for measurement on finished products, for quality control in the production line and for technical service at the customer site. |  |
| Micro-Tri-Gloss | BYK-Gardner USA | Micro-Tri-Gloss combines 20°, 60°, 85° in one glossmeter - as handy as the one angle unit. Having three geometries in one unit allows you to be in compliance with international standards and to quickly recognize quality variations. |  |
| Micro-TRI-Gloss μ | BYK-Gardner USA | The micro-TRI-gloss µ measures both in seconds and at the same position. This saves time and is ideal for checks in the field. It simultaneously displays 20°, 60°, and 85° for high gloss to matte coatings. It has an automatic check of glossmeter calibrati...view more The micro-TRI-gloss µ measures both in seconds and at the same position. This saves time and is ideal for checks in the field. It simultaneously displays 20°, 60°, and 85° for high gloss to matte coatings. It has an automatic check of glossmeter calibration standard and an easy, multilingual menu operation with scroll wheel. This instrument also has memory for 999 readings with name input and includes easy-link software for professional documentation in Excel®. view less |  |
| Micro-Wave-Scan | BYK-Gardner USA | Micro-Wave-Scan is used for Orange Peel and DOI measurement. Now you can measure Orange Peel and DOI on small and curved surfaces such as automotive add-on parts like bumpers, gas tank doors, mirror housings, door handles, decorative trim or motorcycle pa...view more Micro-Wave-Scan is used for Orange Peel and DOI measurement. Now you can measure Orange Peel and DOI on small and curved surfaces such as automotive add-on parts like bumpers, gas tank doors, mirror housings, door handles, decorative trim or motorcycle parts. view less |  |
| MicroTroughXL | Kibron Inc. | MicroTroughXL has all the properties of the original MTXS, but can be also used with extended, larger area troughs for more precise recording of compression isotherms. With the accessories of your choice you can build your own complete Langmuir- and Langm...view more MicroTroughXL has all the properties of the original MTXS, but can be also used with extended, larger area troughs for more precise recording of compression isotherms. With the accessories of your choice you can build your own complete Langmuir- and Langmuir-Blodgett laboratory. It is recommended for recording surface pressure and isotherms, studying the organization and functions of lipid rafts, and the penetration of drugs and peptides into monolayers. view less |  |
| Pencil Hardness Tester | BYK-Gardner USA | Pencil Hardness Tester is used to determine the resistance of coating materials or lacquers to scratch effects on the surface. This test is of particular value for furniture or vehicle lacquers, but is also a useful aid in the development of synthetic ...view more Pencil Hardness Tester is used to determine the resistance of coating materials or lacquers to scratch effects on the surface. This test is of particular value for furniture or vehicle lacquers, but is also a useful aid in the development of synthetic resins or other film forming materials. Generally, scratch hardness is measured by moving a sharp object under a known pressure over the test surface. The result may either be the value of the pressure required to scratch through the test material if a scratching tool of constant hardness is used, or the hardness of the scratching tool is varied while constant pressure is applied. view less |  |
| Pendulum Hardness Tester | BYK-Gardner USA | The Pendulum Hardness Tester is a laboratory measuring instrument for hardness measurements in accordance with the König and Persoz methods. It has an automatic counter with acoustic signal when the deflection is below 3° (König) or 4° (Persoz) respective...view more The Pendulum Hardness Tester is a laboratory measuring instrument for hardness measurements in accordance with the König and Persoz methods. It has an automatic counter with acoustic signal when the deflection is below 3° (König) or 4° (Persoz) respectively. This instrument also offers a digital counter and a selector switch for display in seconds or number of oscillations. view less |  |
| PosiTector DPM | BYK-Gardner USA | PosiTector DPM is used to measure and record climatic parameters including air temperature, surface temperature, dew point temperature and the difference between surface and dew point temperatures, which is critial for determining condensation probabilit...view more PosiTector DPM is used to measure and record climatic parameters including air temperature, surface temperature, dew point temperature and the difference between surface and dew point temperatures, which is critial for determining condensation probability. This meter is ideal for surface preparation, as required by ISO 8502-4. view less |  |
| PosiTest Family Pull-Off Adhesion Test | BYK-Gardner USA | The PosiTest pull-off adhesion testers measure paint adhesion on metal, wood and other rigid substrates. This easy-to-use, reliable and versatile instrument uses hydraulic pressure and a revolutionary self-aligning dolly to ensure uniform pull distributio...view more The PosiTest pull-off adhesion testers measure paint adhesion on metal, wood and other rigid substrates. This easy-to-use, reliable and versatile instrument uses hydraulic pressure and a revolutionary self-aligning dolly to ensure uniform pull distribution over the surface being tested, preventing a one-sided pull-off. This is done using a ring of small ball bearings to engage the articulating dolly head. There are two models available: the model AT-A Automatic Pull-Off Adhesion Tester and Model AT manual version. view less |  |
| Precision Microscope | BYK-Gardner USA | This precision microscope usually is used to measure indentation length. It allows for 20x magnification and has an inclusive light source. |  |
| PSA300 - Static Image Analysis System Particle Size | HORIBA Instruments, Inc. | PSA300 - Static Image Analysis System Particle Size is a state of the art turn-key image analysis solution. Seamless integration of Clemex's powerful particle characterization software and an automated microscope with high resolution camera creates an int...view more PSA300 - Static Image Analysis System Particle Size is a state of the art turn-key image analysis solution. Seamless integration of Clemex's powerful particle characterization software and an automated microscope with high resolution camera creates an intuitive, easy-to-use imaging workstation. Analysis of numerous samples from the same batch guarantees significant statistical measurements. Clemex/Horiba PSA300 is the only image analysis system that offers this advantage. Using the microscopy solution allows to: measure different-sized particles in the same run; measure and isolate particles on the basis of shape, color, size and texture; automatically validate the accuracy and precision of measurements; scan large or small areas of one or many samples; customize reports and meet compliance. PSA300 can measure fine and ultra-fine micronized particles of many types of powdered materials. view less |  |
| Q-FOG Cyclic Corrosion Tester | Q-Lab, Inc. | Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforc...view more Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforced fiberglass and there is no internal steel framework to corrode. They feature precise control of fog volume through the use of a variable speed peristaltic pump. Variable humidity control and shower capabilities are available as options. A remarkably simple user interface allows for easy user programming and operation. The Q-FOG controller includes complete self-diagnostics, including warning messages, routine service reminders, and safety shut down. Purified water is required for proper operation. view less | |
| Q-SUN Xenon Test Chambers | Q-Lab, Inc. | Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different ...view more Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different models: the tabletop Xe-1, and full-sized Xe-2 and Xe-3. Each air-cooled tester features Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet, a variety of standard sample holders and a remarkably simple user interface available in five languages. view less | |
| QUV Accelerated Weathering Tester | Q-Lab, Inc. | Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or we...view more Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or weeks, the QUV tester can reproduce the damage that occurs over months or years outdoors. With thousands of testers in service worldwide, the QUV tester is the world's most widely used weathering tester. QUV testers are available in four different models: QUV/basic, QUV/se, QUV/spray, and QUV/cw. Each air-cooled tester featured Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet and/or USB, a variety of standard sample holders, automatic fault recognition and alarms, automatic shut-down timer, and a remarkably simple user interface available in five languages. view less | |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...view more RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. view less |  |
| Rheolaser™ Coating | Formulaction Inc. | The Rheolaser™ Coating is a non-invasive, optical technique used to analyze the drying profiles of thing films. The device uses Diffusing Wave Spectroscopy to detect the Browniam motion of the particles inside of a thin film sample as it dries in order to...view more The Rheolaser™ Coating is a non-invasive, optical technique used to analyze the drying profiles of thing films. The device uses Diffusing Wave Spectroscopy to detect the Browniam motion of the particles inside of a thin film sample as it dries in order to give profile evolution and characteristic drying times. view less |  |
| Rheolaser™ Crystal | Formulaction Inc. | A new device from Formulaction, the Rheolaser™ Crystal measures the microstructure evolution of samples by detecting phase transitions and molecular movements under thermal ramping conditions. Diffusing Wave Spectroscopy is utilized to detect melting, cry...view more A new device from Formulaction, the Rheolaser™ Crystal measures the microstructure evolution of samples by detecting phase transitions and molecular movements under thermal ramping conditions. Diffusing Wave Spectroscopy is utilized to detect melting, crystallization and polymorphic transitions in bulk samples with the click of a button. This thermal analysis technique excels when measuring samples with delicate microstructures or in cases where typical thermal analysis techniques fail. view less |  |
| Rheolaser™ Master | Formulaction Inc. | The Rheolaser™ Master uses Diffusing Wave Spectroscopy in order to characterize the viscoelastic nature of concentrated samples in a native state. This non-invasive technique can allow for the determination of viscosity and elasticity profiles as well as ...view more The Rheolaser™ Master uses Diffusing Wave Spectroscopy in order to characterize the viscoelastic nature of concentrated samples in a native state. This non-invasive technique can allow for the determination of viscosity and elasticity profiles as well as accurate gel point determination. view less |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...view more Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. view less |  |
| Rotational Viscometers | BYK-Gardner USA | Rotational Viscometers have become a standard in virtually all industries. They measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid. The torque is proportional to the viscous drag on the spindle; ...view more Rotational Viscometers have become a standard in virtually all industries. They measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid. The torque is proportional to the viscous drag on the spindle; thus the sample viscosity. view less |  |
| SA-9600 Series Surface Area Analyzers | HORIBA Instruments, Inc. | SA-9600 Series Surface Area Analyzer brings exceptional convenience and confidence to surface area and pore volume analysis. Now you can perform single-point surface area, multi-point surface area and total pore volume measurements with push-button ease. ...view more SA-9600 Series Surface Area Analyzer brings exceptional convenience and confidence to surface area and pore volume analysis. Now you can perform single-point surface area, multi-point surface area and total pore volume measurements with push-button ease. It's use of the flowing-gas method allows routine total surface area measurements to be made as quickly as every six minutes, depending on magnitude of surface area. The three-station SA-9603 analyzer measures three samples simultaneously. Because it is fully automated, the SA-9600 series eliminates variables that are sometimes introduced by operator involvement, such as the measurement of nitrogen or movement of the dewer flasks. The SA-9600 provides quick, user friendly specific surface area analysis for a wide variety of powders ranging from catalysts to active pharmaceutical ingredients (API’s). Low surface area API’s and excipients are particularly well suited for analysis by the SA-9600, which provides a quicker measurement time at a lower cost than competitive options. view less |  |
| Sample Cuvettes | BYK-Gardner USA | Square, rectangle and cylindrical cuvettes can be used for color measurement of liquids. Both precision as well as inexpensive disposable tubes are available. The precision cuvettes ensure reproducible results – even for critical solutions as clear as wat...view more Square, rectangle and cylindrical cuvettes can be used for color measurement of liquids. Both precision as well as inexpensive disposable tubes are available. The precision cuvettes ensure reproducible results – even for critical solutions as clear as water. For daily QC disposable cuvettes save time and money. view less |  |
| Single Impact Tester ESP-10 | BYK-Gardner USA | Single Impact Tester ESP-10 is used to test chip resistance. Resistance to chipping of multi-coat systems is an important factor in automotive finishing. To protect auto body parts, a multi-coat system is applied for corrosion and mechanical stress. The c...view more Single Impact Tester ESP-10 is used to test chip resistance. Resistance to chipping of multi-coat systems is an important factor in automotive finishing. To protect auto body parts, a multi-coat system is applied for corrosion and mechanical stress. The complete coating structure is decisive for its resistance to chipping. view less |  |
| Spectro-Guide | BYK-Gardner USA | Spectro-Guide offers total appearance control - color and gloss in one unit. The overall appearance of a product is influenced by color and gloss. The spectro-guide spectrophotometer is unique as it measures both attributes simultaneously. |  |
| SPI Modified Impact Tester | BYK-Gardner USA | SPI Modified Impact Tester was developed in cooperation with the Society of the Plastics Industry (SPI) for evaluating impact resistance of rigid sheets of PVC (30-60 mils thick) and other plastics and materials exceeding the 160 inch-pounds limit of the ...view more SPI Modified Impact Tester was developed in cooperation with the Society of the Plastics Industry (SPI) for evaluating impact resistance of rigid sheets of PVC (30-60 mils thick) and other plastics and materials exceeding the 160 inch-pounds limit of the Heavy-Duty Impact Tester. view less |  |
| SZ-100 - Nanopartica Series Instruments | HORIBA Instruments, Inc. | SZ-100 - Nanopartica Series Instruments is a highly advanced analyzer solves the mysteries of the nano-world. A single device analyzes the three parameters that characterize nanoparticles: particle diameter, zeta potential, and molecular weight. Advan...view more SZ-100 - Nanopartica Series Instruments is a highly advanced analyzer solves the mysteries of the nano-world. A single device analyzes the three parameters that characterize nanoparticles: particle diameter, zeta potential, and molecular weight. Advantages of SZ-100 include sampling measurement using the industry’s lowest sample volume of 100 μL is possible and arithmetic processing from an auto-correlation function by a Fourier transformation to electrical mobility. SZ-100 provides a mean to highly accurate, highly reproducible measurement: electro-osmotic flow countermeasure. Some applications for SZ-100 include biomaterials such as vitamins, enzymes and metals. view less |  |
| Turbiscan™ AGS | Formulaction Inc. | The Turbiscan™ AGS integrates the Turbiscan™ LAB stability analyzer to an autosampling robot capable of analyzing up to 54 samples with three different temperature chambers operating from RT to 60 degrees C. |  |
| Turbiscan™ Classic MA 2000 | Formulaction Inc. | Turbiscan™ Classic MA 2000 is the device to optimise the pre-formulation work by giving an insight into the instability phenomena. |  |
| Turbiscan™ LAB | Formulaction Inc. | The Turbiscan™ LAB can quantify and predict the stability of concentrated systems such as emulsions, dispersions and foams. A non-invasive Multiple Light Scattering (MLS) technique is employed to determine the intensity of particle migration kinetics (sed...view more The Turbiscan™ LAB can quantify and predict the stability of concentrated systems such as emulsions, dispersions and foams. A non-invasive Multiple Light Scattering (MLS) technique is employed to determine the intensity of particle migration kinetics (sedimentation, creaming, clarification) and particle size change kinetics (flocculation, coalescence, packing) as well as phase thickness growth. Analysis can be performed from RT to 60 degrees C on samples up to 95% concentration. view less |  |
| Turbiscan™ Online Process | Formulaction Inc. | Turbiscan™ Online and Turbiscan™ Online+ to monitor on-line and in real time the physical properties of liquid dispersions: diameter and concentration. |  |
