| AGITAN® 295 | Munzing Chemie | AGITAN® 295 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective defoamer for emulsion based and water reducible systems. It is commonly used in architec...view more AGITAN® 295 is a liquid brown, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective defoamer for emulsion based and water reducible systems. It is commonly used in architectural, industrial, and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 296 | Munzing Chemie | AGITAN® 296 is a liquid yellow, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective in clear coats and low viscosity systems and is commonly used in industrial coatings and...view more AGITAN® 296 is a liquid yellow, turbid blend of liquid hydrocarbons, hydrophobic silica, fatty and alkoxylated compounds, and nonionic emulsifiers. It is an effective in clear coats and low viscosity systems and is commonly used in industrial coatings and printing inks. view less | |
| AGITAN® 301 | Munzing Chemie | AGITAN® 301 is a liquid yellow, turbid blend of vegetable oils, modified fatty compounds, nonionic emulsifiers with some biodegradable silicone. It is commonly used in printing inks, adhesives, and paper coatings. | |
| AGITAN® 305 | Munzing Chemie | AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting ...view more AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders. It is commonly used in wood coatings, printing inks, and adhesives. view less | |
| AGITAN® 307 | Munzing Chemie | AGITAN® 307 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting ...view more AGITAN® 307 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders. It is commonly used in wood and paper coatings, printing inks, and adhesives. view less | |
| AGITAN® 315 | Munzing Chemie | AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all...view more AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all common binders. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. view less | |
| AGITAN® 350 | Munzing Chemie | AGITAN® 350 is a liquid white-yellow, turbid blend of modified fatty and alkoxylated compounds, silica, nonionic. It has a high stability and efficiency. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. | |
| AGITAN® 351 | Munzing Chemie | AGITAN® 351 is a liquid white-yellow, turbid blend of modified fatty and alkoxylated compounds, silica, nonionic. It has a high stability and efficiency. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. | |
| AGITAN® 381 | Munzing Chemie | AGITAN® 381 is a liquid brown, turbid blend of pharmaceutical grade white oils, hydrophobic silica, oxalkylated compounds and nonionic emulsifiers, free of silicone. It is an effective, low-emmision defoamer and is effective in clear coats, pigmented sys...view more AGITAN® 381 is a liquid brown, turbid blend of pharmaceutical grade white oils, hydrophobic silica, oxalkylated compounds and nonionic emulsifiers, free of silicone. It is an effective, low-emmision defoamer and is effective in clear coats, pigmented systems and low viscosity systems. It is commonly used for adhesives, printing inks, and architectural, industrial, wood and automotive coatings. view less | |
| AGITAN® 526 | Munzing Chemie | AGITAN® 526 is a liquid white aqueous emulsion of polysiloxane polymer. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, industrial, and wood coatings. | |
| AGITAN® 527 | Munzing Chemie | AGITAN® 527 is a liquid white blend of polysiloxane and polyoxalkylene that is emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, indus...view more AGITAN® 527 is a liquid white blend of polysiloxane and polyoxalkylene that is emulsified in water. It is a polysiloxane emulsion with excellent stability and defoaming persistency. It is commonly used in printing inks, adhesives, and architectural, industrial, and wood coatings. view less | |
| AGITAN® 650 | Munzing Chemie | AGITAN® 650 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is an emulsifiable defoamer which can be used in pigments. It is commonly used in wood coatings, printing inks, an...view more AGITAN® 650 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is an emulsifiable defoamer which can be used in pigments. It is commonly used in wood coatings, printing inks, and adhesives. view less | |
| AGITAN® 651 | Munzing Chemie | AGITAN® 651 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is a low-emission defoamer which can be used in pigments and low viscosity systems. It is commonly used in wood co...view more AGITAN® 651 is a liquid yellow, turbid blend of pharmaceutical grade hydrocarbons, special waxes and nonionic emulsifiers, silicone-free. It is a low-emission defoamer which can be used in pigments and low viscosity systems. It is commonly used in wood coatings, printing inks, and adhesives. view less | |
| AGITAN® 701 | Munzing Chemie | AGITAN® 701 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated and modified fatty compounds and nonionic emulsifiers. It is well suited for water reducible systems and aqueous gloss emulsion systems. It is commonly used in adh...view more AGITAN® 701 is a liquid yellow, turbid blend of liquid hydrocarbons, silicones, alkoxylated and modified fatty compounds and nonionic emulsifiers. It is well suited for water reducible systems and aqueous gloss emulsion systems. It is commonly used in adhesives and printing inks, and wood, architectural and industrial coatings. view less | |
| AGITAN® 731 | Munzing Chemie | AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...view more AGITAN® 731 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 760 | Munzing Chemie | AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and ...view more AGITAN® 760 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 761 | Munzing Chemie | AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coating...view more AGITAN® 761 is a liquid yellow, turbid blend of modified organo polysiloxanes with nonionic compounds. It is an effective siloxane defoamer for aqueous emulsion and water reducible systems. It is commonly used in architectural, industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 765 | Munzing Chemie | AGITAN® 765 is a liquid yellow, turbid blend of modified organopolysiloxane, nonionic. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhe...view more AGITAN® 765 is a liquid yellow, turbid blend of modified organopolysiloxane, nonionic. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 766 | Munzing Chemie | AGITAN® 766 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds and hydrophobic silica. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and w...view more AGITAN® 766 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds and hydrophobic silica. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 767 | Munzing Chemie | AGITAN® 767 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well a...view more AGITAN® 767 is a liquid transparent blend of modified organopolysiloxanes with nonionic alkoxylated compounds. It is an effective siloxane defoamer that is ideal for water-based wood coatings. It is commonly used in industrial and wood coatings, as well as printing inks and adhesives. view less | |
| AGITAN® 771 | Munzing Chemie | AGITAN® 771 is a liquid yellowish solution made of siloxane copolymer in dipropylene glycol mono methylether. It is an effective siloxane defoamer with excellent persistency. It is commonly used in general industrial coatings and printing inks. | |
| AGITAN® 80 | Munzing Chemie | AGITAN® 80 is a liquid white blend of hydrophobic silica, alkoxylated compounds and emulsifiers, in emulsion. It is an emulsion with excellent stability and defoaming persistency. It is commonly used in architectural coatings, printing inks and adhesives. | |
| AGITAN® A201 | Munzing Chemie | AGITAN® A201 is a liquid opaque off-white blend of special wax and mineral oil. It is a universal defoamer that is most effective in adhesives applications. It is commonly used in architectural, clear, high gloss and industrial coatings, as well as lamina...view more AGITAN® A201 is a liquid opaque off-white blend of special wax and mineral oil. It is a universal defoamer that is most effective in adhesives applications. It is commonly used in architectural, clear, high gloss and industrial coatings, as well as laminating, packaging, envelope, wood glue and construction adhesives, and water-based printing inks. view less | |
| AGITAN® A203E | Munzing Chemie | AGITAN® A203E is a liquid opaque off-white blend of special wax, hydrophobic silica and mineral oil. It is an oil-based defoamer that is made for printing ink formulations and is also used as a press-side defoamer. It is commonly used for architecutral co...view more AGITAN® A203E is a liquid opaque off-white blend of special wax, hydrophobic silica and mineral oil. It is an oil-based defoamer that is made for printing ink formulations and is also used as a press-side defoamer. It is commonly used for architecutral coatings, and corrugated, film and foil, press-side, and screen ink printing inks, as well as PSA, laminating, packaging, envelope, labels, and acrylic adhesives. view less | |
| AGITAN® A206E | Munzing Chemie | AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acry...view more AGITAN® A206E is a liquid opaque off-white blend of hydrophobic silica and mineral oil. It is a defoamer for architectural coatings that provides initial and long-term defoaming persistence in both the letdown and grind phases. It is commonly used in acrylic, EVA, VA, and latex-based adhesives, and industrial water-based and wood coatings, as well as traffic paint. view less | |
| AGITAN® A208 | Munzing Chemie | AGITAN® A208 is a liquid hazy amber blend of metallic stearate and mineral oil. It is a universal defoamer that is most effective in adhesive applications and is also efficient in pigment dispersing and defoaming metallic inks. It is commonly used in wood...view more AGITAN® A208 is a liquid hazy amber blend of metallic stearate and mineral oil. It is a universal defoamer that is most effective in adhesive applications and is also efficient in pigment dispersing and defoaming metallic inks. It is commonly used in wood, industrial water-based and architectural coatings, as well as pigment grinding and metallic printing inks, and wood glue and construction adhesives. view less | |
| AGITAN® A209 | Munzing Chemie | AGITAN® A209 is a liquid brown, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It has high efficiency, good versatility, compatibility, and effectiveness over a range of pH and temperature levels. It is commonly used in architectural c...view more AGITAN® A209 is a liquid brown, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It has high efficiency, good versatility, compatibility, and effectiveness over a range of pH and temperature levels. It is commonly used in architectural coatings and plasters, printing inks, adhesives and paper coatings. view less | |
| AGITAN® A210 | Munzing Chemie | AGITAN® A210 is a liquid yellow, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for common emulsion systems. It has good foaming control, aeration, compatibility and efficiency. It is commonly used in architectural coa...view more AGITAN® A210 is a liquid yellow, turbid blend of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for common emulsion systems. It has good foaming control, aeration, compatibility and efficiency. It is commonly used in architectural coatings and plasters, UV printing inks, and adhesives. view less | |
| AGITAN® DF 581 B | Munzing Chemie | AGITAN® DF 581 B is a liquid light, turbid blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it provides versatility, fast action, and is non-silicone based. It is commonly used in adhes...view more AGITAN® DF 581 B is a liquid light, turbid blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it provides versatility, fast action, and is non-silicone based. It is commonly used in adhesives, architectural coatings and plasters. view less | |
| AGITAN® DF 6002 | Munzing Chemie | AGITAN® DF 6002 is a liquid yellow, turbid blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it helps to control foaming and aeration, is highly effective at low concentrations, and has ...view more AGITAN® DF 6002 is a liquid yellow, turbid blend of light mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and it helps to control foaming and aeration, is highly effective at low concentrations, and has long lasting efficiency. It is commonly used in emulsion paints, architectural coatings and plasters. view less | |
| AGITAN® DF 6027 | Munzing Chemie | AGITAN® DF 6027 is a liquid yellow, turbid blend of polyethers and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and mineral oil free, encourages drainage and the collapse of colloid stabilized foams. It is commonly u...view more AGITAN® DF 6027 is a liquid yellow, turbid blend of polyethers and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and mineral oil free, encourages drainage and the collapse of colloid stabilized foams. It is commonly used in printing inks and adhesives. view less | |
| AGITAN® DF 6029 | Munzing Chemie | AGITAN® DF 6029 is a liquid yellow, turbid blend of polyethers and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and mineral oil free, encourages drainage and the collapse of colloid stabilized foams, and retinas high...view more AGITAN® DF 6029 is a liquid yellow, turbid blend of polyethers and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and mineral oil free, encourages drainage and the collapse of colloid stabilized foams, and retinas high efficiency. It is commonly used in printing inks and adhesives. view less | |
| AGITAN® DF 6420 | Munzing Chemie | AGITAN® DF 6420 is a colorless liquid aqueous silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and is very versatile, efficient, and provides good dispersion in most organic solvents. It is commonly used...view more AGITAN® DF 6420 is a colorless liquid aqueous silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and is very versatile, efficient, and provides good dispersion in most organic solvents. It is commonly used in adhesives and printing inks. view less | |
| AGITAN® DF 6421 | Munzing Chemie | AGITAN® DF 6421 is a liquid colorless silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and has good versatility and dispersion in most organic solvents. It is commonly used in adhesives and printing inks...view more AGITAN® DF 6421 is a liquid colorless silicone oil in a mixed solvent system (APEO-free). It is a defoamer for all common emulsion systems and has good versatility and dispersion in most organic solvents. It is commonly used in adhesives and printing inks. view less | |
| AGITAN® DF 6681 | Munzing Chemie | AGITAN® DF 6681 is a liquid yellow-brown, turbid mixture of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good control over foaming and aeration, good compatibility, efficiency and is effective...view more AGITAN® DF 6681 is a liquid yellow-brown, turbid mixture of mineral oil and non-ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good control over foaming and aeration, good compatibility, efficiency and is effective over a wide range of pH and temperature values. It is commonly used in adhesives, printing inks and industrial and wood coatings. view less | |
| AGITAN® DF 681 F | Munzing Chemie | AGITAN® DF 681 F is a liquid yellow, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good foaming control, compatibility, has good efficiency, and is effective over a wide pH ra...view more AGITAN® DF 681 F is a liquid yellow, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and has good foaming control, compatibility, has good efficiency, and is effective over a wide pH range. It is commonly used in adhesives, UV printing inks, architectural coatings and plasters. view less | |
| AGITAN® DF 691 | Munzing Chemie | AGITAN® DF 691 is a liquid brown, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and is has good versatility, compatibility, has good efficiency, and is effective over a wide pH range....view more AGITAN® DF 691 is a liquid brown, turbid mixture of mineral oil and non ionic surfactants (APEO-free). It is a defoamer for all common emulsion systems and is has good versatility, compatibility, has good efficiency, and is effective over a wide pH range. It is commonly used in adhesives, printing inks, and architectural coatings and plasters. view less | |
| AGITAN® DF 999 | Munzing Chemie | AGITAN® DF 999 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that is mineral oil-free, has high efficiency and promotes good drainage and collapse of colloid stabilized foams. It is commonly used in...view more AGITAN® DF 999 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that is mineral oil-free, has high efficiency and promotes good drainage and collapse of colloid stabilized foams. It is commonly used in adhesives, printing inks, and paper coatings. view less | |
| AGITAN® E 255 | Munzing Chemie | AGITAN® E 255 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and wood coat...view more AGITAN® E 255 is a liquid yellow, turbid blend of polyethers and non ionic emulsifiers (APEO-free). It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and wood coatings. view less | |
| AGITAN® E 256 | Munzing Chemie | AGITAN® E 256 is a liquid white, turbid aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and w...view more AGITAN® E 256 is a liquid white, turbid aqueous emulsion of polysiloxane copolymer with hydrophobic silica. It is a defoamer that has excellent stability and persistency. It is commonly used in adhesives, printing inks, and architectural, industrial and wood coatings. view less | |
| AIRASE® 5100 | Evonik Operations GmbH, BL Coating Additives | AIRASE® 5100 is a highly effective defoamer concentrate based on polyether siloxane technology. Excellent defoaming ability. | Request Sample |
| Airase® 5355 Defoamer | Evonik Operations GmbH, BL Coating Additives | Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not...view more Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances. view less | Request Sample |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...view more Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). view less | Request Sample |
| ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content. | Request Sample |
| ALBIDUR® EP 2240 A | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings. | Request Sample |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good prese...view more ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids. view less | Request Sample |
| ALKATERGE T | Univar Solutions | ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible wit...view more ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE-T is miscible with almost all organic liquids. ALKATERGE-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less | Request Sample |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| ALNOVOL® PN 650/60B | Allnex | ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid impro...view more ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food. view less | Request Sample |
| ALNOVOL® UF 410 RPC | Allnex | ALNOVOL® UF 410 RPC is a carbamic resin on silica. It is compatible with most of the synthetic and natural rubbers. Due to the silica carrier in solvents, no clear solution is possible. | Request Sample |
| Aluminate Coupling Agent FD-804 | Zhejiang Feidian Chemical Co., Ltd. | FD-804 is an aluminate coupling agent. It can be used in dope and paint, which can increase ground coat adhesive force and storage stability. This product can be used as a coupling agent in resins containing -OH. | |
| Aluminum-iv-acetylacetonate FD-805 | Zhejiang Feidian Chemical Co., Ltd. | FD-805 is aluminum-iv-acetylacetonate supplied as a white powder. It can be used in dope and paint, which can increase ground coat adhesive force and storage stability. This product can be used as a coupling agent in some special resins. | |
| ALuna-100 | Guangzhou GBS High-Tech & Industry Co., Ltd. | ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to...view more ALuna-100 is a fine, fumed alumina metal oxide with a high specific surface area. This product has high purity, low bulk density, a superfine particle size, good dispersibility, and a positive surface charge. It can be used in powder coatings, in order to improve chargeability and flowing. It can also be used in photo paper in order to provide high gloss and excellent printing. view less | |
| Amine Synergist SZ 115 | Soltech Ltd | Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include ove...view more Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include overprint varnishes, silk screen inks, flexo inks, pigment coatings, and wood sealers. Amine Synergist SZ 115 is 100% polymer solid by weight with a viscosity of 15-25 at 25℃. view less | |
| AMP REGULAR | Univar Solutions | AMP REGULAR is a very efficient co-dispersant for pigments, and contributes pH stability, low odor, and anticorrosive properties; furthermore, it promotes acceptance of colorants. | Request Sample |
| AMP-95 | Univar Solutions | AMP-95 is a multifunctional specialty additive with a relatively low viscosity provides numerous benefits including co-dispersing, neutralization, low odor, formaldehyde scavenging and meets various FDA approvals for indirect food contact. | Request Sample |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| Antifoam V12 | Basildon Chemical Company Ltd. | Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in p...view more Antifoam V12 is a liquid 100% self emulsifying mineral oil based antifoam agent that is amber in color and translucent. It has good reliability properties and versatility properties. This product is easily dilutable when mixed with water, and is used in printing inks, paints, glues, paint resins, and adhesives. view less | |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...view more Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. view less | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...view more Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. view less | |
| AQUACER® 513 | BYK | AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in pr...view more AQUACER® 513 is a non-ionic emulsion based on an oxidized HD polyethylene wax. It is suitable for use in aqueous systems and printing inks. This product improves the following surface properties: scratch resistance in aqueous systems, rub resistance in printing inks and black heel marking resistance in parquet lacquers. view less | |
| AQUACER® 531 | BYK | AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resi...view more AQUACER® 531is a wax emulsion for improving surface properties of water-borne industrial paints and printing inks. It is a non-ionic emulsion based on a modified polyethylene wax. This additive improves the following surface properties: slip, scratch resistance, rub resistance and anti blocking. view less | |
| AQUACER® 552 | BYK | AQUACER® 552 is a non-ionic emulsion based on an oxidized HD polyethylene wax. This product is suitable for use in aqueous systems and printing inks. It is used to improve scratch resistance in aqueous systems. | |
| AQUACER® 593 | BYK | AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and prin...view more AQUACER® 593 is a wax emulsion for improving anti slip of water-borne paint systems and printing inks. It is a non-ionic emulsion of a modified polypropylene wax. This product is suitable for use in non-ionic and anionic water-borne paint systems and printing inks. view less | |
| AquaFLON® 178G (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and polyethylene wax in an aqueous dispersion. AquaFLON® 178G is recommended for water-based inks. | |
| AquaFLON® 50 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for ...view more AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in inks such as water-based inkjet formulations. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. view less | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® 605 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical polyethylene wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in inks. | |
| AquaFLON® 797 (PTFE / Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and polyethylene wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for flexographic and gravure water-based inks. | |
| AquaFLON® MG (PTFE / Wax Dispersion) | Shamrock Technologies, Inc. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. AquaFLON® MG is recommended for thin film water based compositions like printing inks, and overprint varnishes. | |
| AQUAMAT® 263 | BYK | AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduct...view more AQUAMAT® 263 is an oxidized HD polyethylene wax dispersion. This product is suitable for aqueous systems e. g. furniture- and parquet lacquer, industrial- and decorative paints and inks. The additive improves the following surface properties: gloss reduction, scratch resistance, soft feel effect, rub resistance, anti blocking and black heel resistance. view less | |
| Aquapel (Ink Additive) | Shamrock Technologies, Inc. | Aquapel is a hydrophobic additive to control water pickup in inks. | |
| Aquapel Three (Ink Additive) | Shamrock Technologies, Inc. | Aquapel Three is a hydrophobic additive to control water pickup in inks. | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| ATLAS™ 100 | Cabot Corporation - Additives | ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface...view more ATLAS™ 100 is a silica composite additive. It is comprised of hydrophobic silica and polymer in spheroid particles to deliver durability, efficiency, and print quality. It is formulated to prevent embedding, migration and separation from the toner surface. This product is well suited for use in electrophotographic toner applications. view less | |
| ATM1011 | Tianyi Chemical Engineering Material Co., Ltd. | ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. view less | |
| ATM9000 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution view less | |
| ATM9003 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. view less | |
| ATM9006 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution view less | |
| ATM9030 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution view less | |
| B-100 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | B-100 Polyether Amine colorless to pale yellow liquid which permits a slight haze. This product has an average molecular weight of about 1000 and a flash point of 193.3 degrees Celsius. B-100 Polyether Amine acts as a dispersant in coatings and inks. | |
| B205 | Tianyi Chemical Engineering Material Co., Ltd. | B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B207 | Tianyi Chemical Engineering Material Co., Ltd. | B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B307 | Tianyi Chemical Engineering Material Co., Ltd. | B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B507 | Tianyi Chemical Engineering Material Co., Ltd. | B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B596 | Tianyi Chemical Engineering Material Co., Ltd. | B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B607 | Tianyi Chemical Engineering Material Co., Ltd. | B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...view more Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. view less | |
| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...view more Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. view less | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...view more Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. view less | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. |
