UL Prospector

Success!

Successfully saved your search
603 Results
1-Vinylimidazole, VIM BASF SE, Intermediates Division 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less
1,2-Dimethylimidazole, Lupragen DMI BASF SE, Intermediates Division 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes.
1,2-Dimethylimidazole, Lupragen DMI Univar Solutions 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. Request Sample
12-Hydroxystearic Acid Alnor Oil Company, Inc. 12-Hydroxystearic Acid is a wax like compound made from the fatty acids of hydrogenated castor oil. This product is commonly used in coatings, cosmetics, detergents, leather finishings, liquid soaps, personal care items, and surfactants.
1,3-Diaminopropane BASF SE, Intermediates Division 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives.
1,4-Butanediol, BDO BASF SE, Intermediates Division 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less
1,4-Cyclohexane dimethanol divinyl ether, CHDM di BASF SE, Intermediates Division 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble.
1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono BASF SE, Intermediates Division 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less
1,5-Pentanediol, PDO BASF SE, Intermediates Division 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less
1,6-Hexanediol HDO® BASF SE, Intermediates Division 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less
1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 BASF SE, Intermediates Division 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less
1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 Univar Solutions 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less Request Sample
1,9-Nonanediol Diacrylate (V-260) Kowa American Corp/ San Esters Corp. 1,9-Nonanediol Diacrylate (V-260) is a clear to light yellow liquid. It freezes below 0°C and has a boiling point above 250°C. Request Sample
2-(2-Aminoethoxy) ethanol BASF SE, Intermediates Division 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings.
2-Acryloyloxypropyl Phthalate (V-2100) Kowa American Corp/ San Esters Corp. 2-Acryloyloxypropyl Phthalate (V-2100) is a specialty monomer from the Osaka Organic Chemical Ind., Ltd. Request Sample
2-Dimethylaminoethyl Methacrylate (DMMA-D) Kowa American Corp/ San Esters Corp. 2-Dimethylaminoethyl Methacrylate (DMMA-D) is a clear liquid. Request Sample
2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) Kowa American Corp/ San Esters Corp. 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) is a clear water white liquid. It has mehq and phenothiazine (PTZ) as inhibitors. Request Sample
2-Ethoxyethyl Methacrylate (ETMA) Kowa American Corp/ San Esters Corp. 2-Ethoxyethyl Methacrylate (ETMA) is a clear water white liquid. It has the viscosity range of 2 - 6 cps at 25°C. Request Sample
2-Ethyl-4-Methylimidazole BASF SE, Intermediates Division 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes.
2-Ethylhexanoic Acid, 2-EHA BASF SE, Intermediates Division 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less
2-Ethylhexylvinylether, EHVE BASF SE, Intermediates Division 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less
2-Ethylimidazole BASF SE, Intermediates Division 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes.
2-Hydroxyethyl Acrylate (HEA) Kowa American Corp/ San Esters Corp. 2-Hydroxyethyl Acrylate (HEA) is a clear water white liquid. It has a boiling point 82°C and a freezing point of below -70°C. Request Sample
2-Hydroxyethyl Methacrylate (HEMA) Kowa American Corp/ San Esters Corp. 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provide...view more 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provides scratch, solvent & weather resistance, control of hydrophobicity &/or can introduce reactive sites. view less Request Sample
2-Hydroxyethyl Methacrylate (HISS) Kowa American Corp/ San Esters Corp. 2-Hydroxyethyl Methacrylate (HISS) is 0.1% water and has 10 APHA of color when shipped. Request Sample
2-Hydroxypropyl Methacrylate (HPMA) Kowa American Corp/ San Esters Corp. 2-Hydroxypropyl Methacrylate (HPMA) is a Mitsubishi Rayon methacrylate functional monomer. Request Sample
2-Mercaptoethanol BASF SE, Intermediates Division 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings.
2-Methoxyethyl Acrylate (MTA) Kowa American Corp/ San Esters Corp. 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, ...view more 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, water resistance and adhesion. When used as an additive, it improves oil resistance dues to its polarity. view less Request Sample
2-Methoxyethyl Methacrylate (MTMA) Kowa American Corp/ San Esters Corp. 2-Methoxyethyl Methacrylate (MTMA) is 0.1% water and has 20 APHA of color when shipped. Request Sample
2-Methylimidazole BASF SE, Intermediates Division 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes.
2-Octanol (Capryl Alcohol) Alnor Oil Company, Inc. 2-Octanol (Capryl Alcohol) is an 8-carbon secondary alcohol, in the form of a colorless transparent liquid, derived from castor oil. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lub...view more 2-Octanol (Capryl Alcohol) is an 8-carbon secondary alcohol, in the form of a colorless transparent liquid, derived from castor oil. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. view less
2-Octanone (Methyl Hexyl Ketone) Alnor Oil Company, Inc. 2-Octanone (Methyl Hexyl Ketone) is an 8 carbon ketone, in the form of a colorless transparent liquid, derived from castor oil. It is most commonly used in perfume and as a flavor intermediate. This product can be used in adhesives, candles, coatings, cos...view more 2-Octanone (Methyl Hexyl Ketone) is an 8 carbon ketone, in the form of a colorless transparent liquid, derived from castor oil. It is most commonly used in perfume and as a flavor intermediate. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. view less
3-(Cyclohexylamino) propylamine BASF SE, Intermediates Division 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less
3-(Dimethylamino) propylamine BASF SE, Intermediates Division 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings.
3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan BASF SE, Intermediates Division 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less
4-Hydroxybutyl Acrylate (4HBA) Kowa American Corp/ San Esters Corp. 4-HBA is a clear water white liquid. It is used for automotive painting. It helps protect against hardness and anit-rust, as well as offers good color, flatness, smoothness, brightness, and gloss. Request Sample
4-Hydroxybutyl vinyl ether (HBVE) BASF SE, Intermediates Division 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less
4,4'-Diaminodicyclo-hexylmethane BASF SE, Intermediates Division 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less
4,4'-Methylenedianiline, MDA BASF SE, Intermediates Division 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less
4,7,10-Trioxatridecan- 1,13-diamine BASF SE, Intermediates Division 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less
4,9-Dioxadodecan- 1,12-diamine BASF SE, Intermediates Division 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less
680 Blown Soybean Oil Cargill Industrial Specialties 680 Blown Soybean Oil is a specifically oxidized oil that is used in paints, caulking and glazing compounds, printing inks, and mold release applications. Its widespread availability and low cost make soybean oil an ideal component for developing renewabl...view more 680 Blown Soybean Oil is a specifically oxidized oil that is used in paints, caulking and glazing compounds, printing inks, and mold release applications. Its widespread availability and low cost make soybean oil an ideal component for developing renewable, bio-based products. view less
76° Edible Coconut Oil Alnor Oil Company, Inc. 76° Edible Coconut Oil is a bland, odorless, white to pale yelow, solid to semi-solid, lard-like fat derived from the kernel of the fruit of the coconut palm Cocos nucifera. This product is commonly used in confectionery, detergents, ice cream, coatings,...view more 76° Edible Coconut Oil is a bland, odorless, white to pale yelow, solid to semi-solid, lard-like fat derived from the kernel of the fruit of the coconut palm Cocos nucifera. This product is commonly used in confectionery, detergents, ice cream, coatings, margarine, popping oils, shampoos, soaps, spray oils, and surfactants. view less
α-Pyrrolidone Shanghai WellTone Material Technology Co., Ltd. α-Pyrrolidone is a colorless high boiling point polar solvent and also an organic synthetic intermediate product. As to this kind of solvent, it can be used to produce synthetic resin, pesticide, polyvalent alcohol, printing inks and iodine.
Acrylamide Solid Kowa American Corp/ San Esters Corp. Acrylamide Solid is a white crystal powder. Request Sample
Acrylic Acid, Glacial Univar Solutions This is glacial acrylic acid. Request Sample
Acrylol Chloride Kowa American Corp/ San Esters Corp. Acrylol Chloride is a clear liquid. Request Sample
AEROTEX® NMA Monomer, 48% Aqueous, Inhibited (ROW) Allnex AEROTEX® NMA 48%, offered as a 48% aqueous solution, is a bifunctional monomer possessing both vinyl and hydroxymethyl groups. Thermoplastic polymers can be formed through the copolymerization of NMA with a variety of vinyl monomers via emulsion, solution...view more AEROTEX® NMA 48%, offered as a 48% aqueous solution, is a bifunctional monomer possessing both vinyl and hydroxymethyl groups. Thermoplastic polymers can be formed through the copolymerization of NMA with a variety of vinyl monomers via emulsion, solution, or suspension techniques. The resulting products, having pendant hydroxymethyl groups, are self-crosslinkable under moderate conditions. This mechanism permits the conversion of thermoplastic backbone polymers to thermoset materials at the point of use without the need for an external crosslinker. Conversely, the hydroxymethyl group can first be reacted with a substrate like cellulose and subsequently cross-linked by free radical polymerization. view less Request Sample
AEROTEX® NMA-LF Monomer Allnex AEROTEX® NMA-LF is specifically designed to provide effective selfcrosslinking performance together with a significant reduction in both the formaldehyde present in the resulting emulsion polymer and the formaldehyde released to the environment upon curin...view more AEROTEX® NMA-LF is specifically designed to provide effective selfcrosslinking performance together with a significant reduction in both the formaldehyde present in the resulting emulsion polymer and the formaldehyde released to the environment upon curing. AEROTEX® NMALF combines the cost effectiveness of AEROTEX® NMA with a dramatic reduction in total formaldehyde. The active self-crosslinking species of AEROTEX® NMA-LF is N-methylolacrylamide (NMA). NMA contains both a vinyl group and an N-methylol group. The vinyl group is reactive and enables the NMA to be readily incorporated into a variety of polymer backbones. Once incorporated into the polymer, the methylol group can be triggered to undergo crosslinking with itself, other functional groups in the polymer (such as hydroxyls or amines), or with cellulosic substrates. The bifunctional feature of AEROTEX® NMA-LF ultimately results in latex binders which provide important performance properties to the final product, such as wet strength, tear strength, and solvent resistance. view less Request Sample
Alinco™ M-25 Linseed Oil ADM Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finish...view more Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Q Linseed Oil ADM Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...view more Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ X Linseed Oil ADM Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...view more Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Y Linseed Oil ADM Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...view more Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Z Linseed Oil ADM Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...view more Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Z-1 Linseed Oil ADM Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...view more Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Z-2 Linseed Oil ADM Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...view more Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Z-3 Linseed Oil ADM Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...view more Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Z-4 Linseed Oil ADM Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...view more Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Z-5 Linseed Oil ADM Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...view more Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Z-6 Linseed Oil ADM Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...view more Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Alinco™ Z/2-Z/3 Linseed Oil ADM Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall fin...view more Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. view less
Allyl Methacrylate (AMA) Kowa American Corp/ San Esters Corp. Allyl Methacrylate (AMA) is a clear water liquid. this product is packed in 180Kg (397lb) steel drums or bulk ISO tanks. Request Sample
Alpha Methyl Styrene Dimer (AMSD) Kowa American Corp/ San Esters Corp. Alpha Methyl Styrene Dimer(AMSD) is a colorless liquid. Request Sample
Amino C Acid Hainan Zhongxin Chemical Co., Ltd. Amino C Acid is a grey powder with the molecular formula of C10H9NO6S2. It has an amino content of between 70 - 80 % minimum and an HPLC purity of 97%. Amino C Acid is primarily used as an intermediate in the production of reactive and direct dyes.
β-Mercapto Propionic Acid (BMPA) Kowa American Corp/ San Esters Corp. β-Mercapto Propionic Acid (BMPA) is a clear liquid with no particulate matter. Request Sample
Benzyl Acrylate (BZA, V-160) Kowa American Corp/ San Esters Corp. Benzyl Acrylate (BZA, V-160) is a clear water white liquid. It is .044% insoluble in water. Request Sample
Benzyl Methacrylate (BZMA) Kowa American Corp/ San Esters Corp. Benzyl Methacrylate (BZMA) is a clear water white liquid. When shipped, it is packed in 200Kg (441lb) chemical drums. Request Sample
Benzylamine BASF SE, Intermediates Division Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels.
Bis-MPA™ Perstorp Bis-MPA™ is a dimethylolpropionic acid in the form of a white crystalline material. It is a key raw material in polyurethane dispersion for coatings. Bis-MPA™ can also be used in printing ink applications.
Bisomer® CL HEMA GEO Specialty Chemicals, Inc.TRIMET Products Group Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...view more Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. view less
Bisomer® HEMA HP GEO Specialty Chemicals, Inc.TRIMET Products Group Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...view more Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. view less
Bisomer® LMA GEO Specialty Chemicals, Inc.TRIMET Products Group Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...view more Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). view less
Bisomer® PEA 6 GEO Specialty Chemicals, Inc.TRIMET Products Group Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...view more Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. view less
Bisomer® PPA 6 GEO Specialty Chemicals, Inc.TRIMET Products Group Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...view more Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. view less
Boiled Linseed Oil Alnor Oil Company, Inc. Boiled Linseed Oil is an oil derived from the seeds of flax plants and comprised of palmitic, stearic, oleic, alpha-linoleic, and omega 3 fatty acids, with added dryers to speed up drying time. This product is commonly used in appliance finishes, paints, ...view more Boiled Linseed Oil is an oil derived from the seeds of flax plants and comprised of palmitic, stearic, oleic, alpha-linoleic, and omega 3 fatty acids, with added dryers to speed up drying time. This product is commonly used in appliance finishes, paints, circuit board coatings, linoleum finishes, enamel coatings, furniture polishes, plasticizers, printing inks, sealants, stains, varnishes, and waterproofing coatings. view less
Boltorn™ P1000 Perstorp Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...view more Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. view less
Boltorn™ P1000 Univar Solutions Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...view more Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. view less Request Sample
Capa™ 2043 Univar Solutions Capa™ 2043 is a standard grade low molecular weight, linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 400 and a typical OH value of 280 mg KOH/g. It is a clear, colorless liquid, ...view more Capa™ 2043 is a standard grade low molecular weight, linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 400 and a typical OH value of 280 mg KOH/g. It is a clear, colorless liquid, that can be processed at ordinary temperatures. Capa™ 2043 can be used in polyurethane adhesive, surface coating and flexible foam applications and as a resin intermediate. view less Request Sample
Capa™ 2085 Univar Solutions Capa™ 2085 is a standard grade low molecular weight, linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 830 and a typical OH value of 135 mg KOH/g. The product is particularly suita...view more Capa™ 2085 is a standard grade low molecular weight, linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 830 and a typical OH value of 135 mg KOH/g. The product is particularly suitable for use as a polyurethane intermediate, and in surface coatings. It can also be used as a resin intermediate. view less Request Sample
Capa™ 2100A Univar Solutions Capa™ 2100A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 112 mg KOH/g. The product was developed as an intermediate for the p...view more Capa™ 2100A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 112 mg KOH/g. The product was developed as an intermediate for the production of high grade polyurethane elastomers. In addition, Capa™ 2100A can be used in polyurethane adhesive, surface coating applications, and as a resin intermediate. view less Request Sample
Capa™ 2101A Univar Solutions Capa™ 2101A is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 112 mg KOH/g. The product has been specially developed as an interm...view more Capa™ 2101A is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 112 mg KOH/g. The product has been specially developed as an intermediate for the production of high grade polyurethane elastomers. In addition, Capa™ 2101A can be used in polyurethane adhesive, surface coating applications, and as a resin intermediate. view less Request Sample
Capa™ 2125 Univar Solutions Capa™ 2125 is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1250 and a typical OH value of 90 mg KOH/g. The product has been specially developed as an intermed...view more Capa™ 2125 is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 1250 and a typical OH value of 90 mg KOH/g. The product has been specially developed as an intermediate for the production of high quality polyurethane elastomers, where high resistance to hydrolysis is required. It is also recommended for the production of high quality polyurethane coatings. view less Request Sample
Capa™ 2141A Univar Solutions Capa™ 2141A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. This product yields a low viscosity prepolymer followed by a high quality polyurethane with good mechanical properties and wear ...view more Capa™ 2141A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. This product yields a low viscosity prepolymer followed by a high quality polyurethane with good mechanical properties and wear resistance. Capa™ 2141A is used in adhesive,sealant, coating, and paint applications. view less Request Sample
Capa™ 2161A Univar Solutions Capa™ 2161A is a premium grade linear polyester diol derived from caprolactone, terminated by primary hydroxyl groups. It has a molecular weight of 1600 and a typical OH value of 70 mg KOH/g. It is a white waxy solid TPU with good flexibility, mechanical,...view more Capa™ 2161A is a premium grade linear polyester diol derived from caprolactone, terminated by primary hydroxyl groups. It has a molecular weight of 1600 and a typical OH value of 70 mg KOH/g. It is a white waxy solid TPU with good flexibility, mechanical, and wear resistance properties. Capa™ 2161A is used in adhesive,sealant, coating, and paint applications. view less Request Sample
Capa™ 2201A Univar Solutions Capa™ 2201A is a premium grade linear polycaprolactone diol. It has a molecular weight 2000 and a typical OH value of 56 mg KOH/g. The product has been developed as a high performance alternative to Capa™ 2201. When used to produce cast or thermoplastic e...view more Capa™ 2201A is a premium grade linear polycaprolactone diol. It has a molecular weight 2000 and a typical OH value of 56 mg KOH/g. The product has been developed as a high performance alternative to Capa™ 2201. When used to produce cast or thermoplastic elastomers it offers improved properties over elastomers made from standard Capa™ materials of better prepolymer stability and improved hydrolysis resistance. Capa™ 2201 can be used in automotive industry, footwear industry, and in adhesive and binding applications. view less Request Sample
Capa™ 2205 Univar Solutions Capa™ 2205 is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 2000 and a typical OH value of 56 mg KOH/g. The product has been specially developed as an intermed...view more Capa™ 2205 is a standard grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 2000 and a typical OH value of 56 mg KOH/g. The product has been specially developed as an intermediate for the production of polyurethane elastomers. In addition, Capa™ 2205 can be used in polyurethane adhesives and surface coatings. view less Request Sample
Capa™ 2302A Univar Solutions Capa™ 2302A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 3000 and a typical OH value of 37 mg KOH/g. It is a white waxy solid. This product offers better hy...view more Capa™ 2302A is a premium grade linear polyester diol derived from caprolactone monomer, terminated by primary hydroxyl groups. It has a molecular weight of 3000 and a typical OH value of 37 mg KOH/g. It is a white waxy solid. This product offers better hydrolysis resistance and lower odourthan Capa™ 2302 ans is recommended for the production of high quality polyurethane coatings and rapid crystallising adhesives. view less Request Sample
Capa™ 2402 Univar Solutions Capa™ 2402 is a standard grade linear polyester diol in the form of a white waxy solid. It has been specially developed as an intermediate for the production of polyurethane adhesives. Capa™ 2402 is recommended for applications where short open times and ...view more Capa™ 2402 is a standard grade linear polyester diol in the form of a white waxy solid. It has been specially developed as an intermediate for the production of polyurethane adhesives. Capa™ 2402 is recommended for applications where short open times and outstanding green strength is required. view less Request Sample
Capa™ 3050 Univar Solutions Capa™ 3050 is a low molecular weight polyester triol. It has a molecular weight of 540 and a typical OH value of 310 mg KOH/g. It is liquid at 20°C and can be processes at ordinary temperatures. Capa™ 3050 can be used in the production of polyurethane sur...view more Capa™ 3050 is a low molecular weight polyester triol. It has a molecular weight of 540 and a typical OH value of 310 mg KOH/g. It is liquid at 20°C and can be processes at ordinary temperatures. Capa™ 3050 can be used in the production of polyurethane surface coatings, particularly for clear, light-stable applications and for coatings require flexible and tough surface characteristics. It is also used in adhesive applications view less Request Sample
Capa™ 80210D Univar Solutions Capa™ 80210D is a develpoment grade linear co-polyester diol in the form of a clear, viscous liquid at normal ambient temperatures. It is made from partly renewable sources and can be used in adhesive and coatings applications. Request Sample
Capa™ 8025D Univar Solutions Capa™ 8025D is a grade 2000Mw, linear co-polyester diol. It is a clear, colorless viscous liquid. The co-polyester is made from partly renewable sources. Capa™ 8025D provides advantages in handling, storage and processing due to its liquid form. It is use...view more Capa™ 8025D is a grade 2000Mw, linear co-polyester diol. It is a clear, colorless viscous liquid. The co-polyester is made from partly renewable sources. Capa™ 8025D provides advantages in handling, storage and processing due to its liquid form. It is used in PU cast elastomer, adhesives, and coating applications. view less Request Sample
Capromer™ PD1–10 BASF SE, Intermediates Division Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less
Capromer™ PD1–10 A BASF SE, Intermediates Division Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less
Capromer™ PD1–20 BASF SE, Intermediates Division Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less
Capromer™ PD1–20 A BASF SE, Intermediates Division Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less
Capromer™ PD4-05 (PolyCLO DEG550) BASF SE, Intermediates Division Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less
Capromer™ PT1–05 (PolyCLO TMP540) BASF SE, Intermediates Division Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less
Castor Oil Alnor Oil Company, Inc. Castor Oil is a clear viscous liquid derived from the seed of the castor plant, with a slight characteristic odor. It is a technical grade castor oil intended for industrial applications. It can be used in a wide range of applications.
Castor Oil USP Alnor Oil Company, Inc. Castor Oil USP is a clear viscous liquid derived from the seed of the castor plant. This product is ideal for use in pharmaceuticals, adhesives, cosmetics, inks, lubricants, soaps, plastics, and textiles.
CD406 Sartomer Americas CD406 is a difunctional cycloaliphatic acrylate monomer that offers fast cure rates and produces hard, durable coatings with good clarity and adhesion to diverse substrates. CD406 is recommended for window films, polycarbonate coatings, solder masks, wood...view more CD406 is a difunctional cycloaliphatic acrylate monomer that offers fast cure rates and produces hard, durable coatings with good clarity and adhesion to diverse substrates. CD406 is recommended for window films, polycarbonate coatings, solder masks, wood, plastic, and paper coatings, dry film photo imaging, and metallized surface coating. view less
CD421A Sartomer Americas CD421A is a low viscosity, monofunctional methacrylate monomer containing a light stable cyclic group. It is a lower volatility, lower odor alternative to cyclohexyl methacrylate. It has excellent solvency characteristics and good adhesion to a var...view more CD421A is a low viscosity, monofunctional methacrylate monomer containing a light stable cyclic group. It is a lower volatility, lower odor alternative to cyclohexyl methacrylate. It has excellent solvency characteristics and good adhesion to a variety of substrates. CD421A has improved thermal stability, good chemical resistance, good hardness, good heat resistance, good water resistance, good weatherability, high abrasion resistance, high Impact Strength and Low shrinkage. Suggested applications are anaerobic adhesives, structural adhesives, anchor bolt adhesives, plastics, industrial coatings. view less
CD535 Sartomer Americas CD535 is a low viscosity cyclic monofunctional methacrylate monomer that is used in a variety of free radical peroxide or azonitrile cure applications, including polymer synthesis, coatings, adhesives, sealants and polymer modification. CD535 is a high Tg...view more CD535 is a low viscosity cyclic monofunctional methacrylate monomer that is used in a variety of free radical peroxide or azonitrile cure applications, including polymer synthesis, coatings, adhesives, sealants and polymer modification. CD535 is a high Tg, hard, low shrinkage monomer that provides good surface cure in thin film applications.This product has dual cure crosslinking capability, high strength and surface cure. Suggested applications include metal, plastic, and concrete coatings and sealants. view less
CD542 Sartomer Americas CD542 is a low volatility monomer used in free radical polymerization. Provides a good hydrophobic and hydrophilic balance. CD542 is a hydrophobic backbone for alkali solubility with low odor. Suggested applications include adhesives, coatings, solder ma...view more CD542 is a low volatility monomer used in free radical polymerization. Provides a good hydrophobic and hydrophilic balance. CD542 is a hydrophobic backbone for alkali solubility with low odor. Suggested applications include adhesives, coatings, solder masks, electronics, photoresists electronics and photopolymers. view less