| CEVA | Suny Chem | CEVA is soluble in toluene and xylene. It has elasticity like rubber, good solubility and fluidity at room temperature. In addition, it has good weather resistance, chemical resistance, oil resistance, ozone resistance and flame resistance property. | |
| CHEMREZ 30 | Univar Solutions | CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and...view more CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin solution to dry pigment. CHEMREZ 30 has been used with a wide range of organic pigments as well as carbon black. CHEMREZ 30 as a letdown vehicle can be used upwards of 50% of the formulation. view less | Request Sample |
| Chlorinated Polyolefin | Suny Chem | Chlorinated Polyolefin is an adhesive resin used for coatings, adhesive to plastics, and hot melt adhesives. | |
| Chlorinated Polypropylene - Ink Type | Suny Chem | Chlorinated Polypropylene - Ink Type is an effective adhesive for BOPP and effective binder for printing inks used on BOPP films. | |
| CHS-Alkyd AL 6550 | Spolchemie | CHS-Alkyd AL 6550 is a long oiled alkyd resin binder for printing inks. This product is not solvent and is made from linseed oil. It has very high viscosity and is fully liquid. The oil length for this product is estimated to be around 73%. This product i...view more CHS-Alkyd AL 6550 is a long oiled alkyd resin binder for printing inks. This product is not solvent and is made from linseed oil. It has very high viscosity and is fully liquid. The oil length for this product is estimated to be around 73%. This product is primarily used for printing inks as a binder for letterpress and offset inks. view less | |
| CHS-Alkyd AL 7150 | Spolchemie | CHS-Alkyd AL 7150 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and linseed oil. It has very high viscosity and is fully liquid. The oil length for this product is estimated to be around 73%. This product is p...view more CHS-Alkyd AL 7150 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and linseed oil. It has very high viscosity and is fully liquid. The oil length for this product is estimated to be around 73%. This product is primarily used for printing inks as a binder for letterpress, offset, heatset, quickset, coldest inks. CHS-Alkyd AL 7150 has good color retention and pigment wetting. view less | |
| CHS-Alkyd AL 7310 | Spolchemie | CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for ...view more CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for printing inks as a binder for offset, heatset and metal decorating inks. CHS-Alkyd AL 7150 has good color retention, water resistance and pigment wetting. view less | |
| CHS-Alkyd TI 870 | Spolchemie | CHS-Alkyd TI 870 is a long oiled alkyd binder for high solid coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 87%. CHS-Alkyd TI 870 ...view more CHS-Alkyd TI 870 is a long oiled alkyd binder for high solid coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 87%. CHS-Alkyd TI 870 is primarily used for economical coatings for wood and metal surfaces. It also is used as a binder for printing inks and pigment pastes. view less | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...view more CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. view less | |
| Cinergi™ 100 A | Lawter | Cinergi™ 100 A is a medium quickset gel varnish from highly structured resin systems and is considered a sheet-fed vehicle. The product displays great synergy and compatibility with a variety of flush color systems. Inks using the product show better colo...view more Cinergi™ 100 A is a medium quickset gel varnish from highly structured resin systems and is considered a sheet-fed vehicle. The product displays great synergy and compatibility with a variety of flush color systems. Inks using the product show better color development, gloss and water balance. Cinergi™ 100 A is commonly used in sheet-fed applications view less | |
| Cinergi™ 1407 A | Lawter | Cinergi™ 1407 A is a water-resistant gloss offset varnish that combines linseed, tung oil and phenolic varnish into a product that provides high gloss and water resistance. A good holdout and high viscosity ensure that inks with the product can be reduced...view more Cinergi™ 1407 A is a water-resistant gloss offset varnish that combines linseed, tung oil and phenolic varnish into a product that provides high gloss and water resistance. A good holdout and high viscosity ensure that inks with the product can be reduced with aliphatic solvents or low viscosity drying oils to boost setting speed without losing gloss. It also has the benefit of good soap and alkali resistance making it ideal for use in a variety of applications. Cinergi™ 1407 A is considered ideal for use in the highest quality offset and letterpress inks, while the product's water resistant feature means it can improve the working properties of lithographic inks. view less | |
| Cinergi™ 2018 A | Lawter | Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensure...view more Cinergi™ 2018 A is a sheet-fed metallic vehicle specifically created for use with gold pigments, although formulations with silver pigment can also be used. The product's resin facilitates improved gloss, holdout and misting. A reduced acid content ensures the finished ink keeps desired properties while countering tarnishing. Its flexibility allows Cinergi™ 2018 A to be adaptable to a variety of metallic applications including sheet-fed inks. view less | |
| Cinergi™ 2034 A | Lawter | Cinergi™ 2034 A is a non-volatile quickset gel vehicle that has low tack and is based on the latest elastic resin technologies. The tack to solids ratio allows users the ability to have maximum solids with few adjustments needed to obtain the desired tack...view more Cinergi™ 2034 A is a non-volatile quickset gel vehicle that has low tack and is based on the latest elastic resin technologies. The tack to solids ratio allows users the ability to have maximum solids with few adjustments needed to obtain the desired tack in the finished ink. Other benefits include press stability, good litho qualities and set speed. view less | |
| Cinergi™ 2035 A | Lawter | Cinergi™ 2035 A is a free-flowing quickset varnish that is non-volatile and is made to adjust tack and flow in high solid ink systems. With elastic resin technology, the product helps to increase leveling, transfer and flow. This leads to higher gloss, wi...view more Cinergi™ 2035 A is a free-flowing quickset varnish that is non-volatile and is made to adjust tack and flow in high solid ink systems. With elastic resin technology, the product helps to increase leveling, transfer and flow. This leads to higher gloss, without affecting set speed. The product is ideally suited for use in sheet-fed inks and when used with other Cinergi™ lithographic vehicle products, yields superior ink performance. view less | |
| Cinergi™ 2084 A | Lawter | Cinergi™ 2084 A is a quickset gel vehicle made for a variety of applications that allow it to be used in laser form and conventional inks. The product gives the ink formulation the freedom to formulate a variety of inks from one source. It is considered i...view more Cinergi™ 2084 A is a quickset gel vehicle made for a variety of applications that allow it to be used in laser form and conventional inks. The product gives the ink formulation the freedom to formulate a variety of inks from one source. It is considered ideal for use in sheet-fed inks and laser forms. view less | |
| Cinergi™ 2085 A | Lawter | Cinergi™ 2085 A is a quickset gel vehicle that can be adaptable to laser forms and conventional ink applications. The product gives the ink formulation the freedom to formulate a variety of inks from a single source. Its benefits include a heavy gel with ...view more Cinergi™ 2085 A is a quickset gel vehicle that can be adaptable to laser forms and conventional ink applications. The product gives the ink formulation the freedom to formulate a variety of inks from a single source. Its benefits include a heavy gel with good holdout, gloss and rub features. It is considered suitable for use in sheet-fed inks and laser forms. view less | |
| Cinergi™ 45 A | Lawter | Cinergi™ 45 A is a quickset varnish from highly-structured resin systems and has the benefit of providing good solubility and solvent release. It is fast setting and is ideally suited for use in sheet-fed inks. | |
| Cinergi™ 80 A | Lawter | Cinergi™ 80 A is a quickset varnish from highly structured resin systems which makes for greater synergy, compatibility and fast setting with various flush color systems. The product is an ideal letdown/free-flow companion tool for Cinergi™-gelled systems...view more Cinergi™ 80 A is a quickset varnish from highly structured resin systems which makes for greater synergy, compatibility and fast setting with various flush color systems. The product is an ideal letdown/free-flow companion tool for Cinergi™-gelled systems. It is used in sheet-fed inks. view less | |
| CN1000 | Sartomer Americas | CN1000 is an oligomer with low viscosity and high functionality specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of both inks and hardcoat formulations. The suggested level ...view more CN1000 is an oligomer with low viscosity and high functionality specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of both inks and hardcoat formulations. The suggested level of addition is 15-20% of the total formulation. view less | |
| CN1001 | Sartomer Americas | CN1001 is an oligomer with low viscosity and high functionality specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of both inks and hardcoat formulations. The suggested level ...view more CN1001 is an oligomer with low viscosity and high functionality specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of both inks and hardcoat formulations. The suggested level of addition is 15-20% of the total formulation. view less | |
| CN1002 | Sartomer Americas | CN1002 is an oligomer that combines abrasion resistance and flexibility with hardness and fast cure response. CN1002 is specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of b...view more CN1002 is an oligomer that combines abrasion resistance and flexibility with hardness and fast cure response. CN1002 is specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of both inks and hardcoat formulations. The suggested level of addition is 15-20% of the total formulation. view less | |
| CN104A60 | Sartomer Americas | CN104A60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's ...view more CN104A60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphenol A based epoxy acrylates. Performance properties for CN104A60 include good adhesion, good chemical resistance, good hardness, good water resistance and high abrasion resistance. Suggested applications include are adhesives, coatings, electronics, inks and sealants. view less | |
| CN104A75 | Sartomer Americas | CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphen...view more CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphenol A based epoxy acrylates. Suggested applications for this include adhesives, coatings, electronics and inks. view less | |
| CN104A80Z | Sartomer Americas | CN104A80Z is a difunctional bisphenol A based epoxy acrylate blended with 20% SR-306, tripropylene glycol diacrylate. It provides good balance of water properties and high reactivity. The base oligomer, CN-104, is the lowest color of Sartomer’s bisphenol ...view more CN104A80Z is a difunctional bisphenol A based epoxy acrylate blended with 20% SR-306, tripropylene glycol diacrylate. It provides good balance of water properties and high reactivity. The base oligomer, CN-104, is the lowest color of Sartomer’s bisphenol A based epoxy acrylates. CN104A80Z imparts chemical resistance, excellent gloss, high reactivity and low color. Suggested applications include adhesives, coatings, electronics, inks and sealants. view less | |
| CN104D80 | Sartomer Americas | CN104D80 difunctional bisphenol A epoxy acrylate blended with SR-9020, glyceryl propoxy triacrylate. It has a good balance of water properties and high reactivity. CN104 offers the lowest base color of Sartomers bisphenol A epoxy acrylates. Suggested appl...view more CN104D80 difunctional bisphenol A epoxy acrylate blended with SR-9020, glyceryl propoxy triacrylate. It has a good balance of water properties and high reactivity. CN104 offers the lowest base color of Sartomers bisphenol A epoxy acrylates. Suggested applications include adhesives, coatings, electronics, inks, and sealants. view less | |
| CN104Z | Sartomer Americas | CN104Z is a difunctional epoxy acrylate. It provides a good balance of water properties and high reactivity. CN104Z offers the lowest color of Sartomer epoxy acrylates. It exhibits good chemical resistance. | |
| CN110 | Sartomer Americas | CN110 is a difunctional bisphenol A-based epoxy acrylate oligomer that provides a good balance of water properties and high reactivity. The performance properties for this product are abrasion resistance, adhesion, chemical resistance and water resistance...view more CN110 is a difunctional bisphenol A-based epoxy acrylate oligomer that provides a good balance of water properties and high reactivity. The performance properties for this product are abrasion resistance, adhesion, chemical resistance and water resistance. Suggested applications include adhesives, coatings, electronics, inks and sealants. view less | |
| CN111US | Sartomer Americas | CN111US is a difunctional epoxidized soy bean oil acrylate oligomer that offers pigment wetting characteristics and produces flexible, well-adhering free-radically cured films. It has high impact strength and low shrinkage. Suggested applications include ...view more CN111US is a difunctional epoxidized soy bean oil acrylate oligomer that offers pigment wetting characteristics and produces flexible, well-adhering free-radically cured films. It has high impact strength and low shrinkage. Suggested applications include coatings, concrete and inks. view less | |
| CN116 | Sartomer Americas | CN116 is a modified epoxy acrylate oligomer. It has fast cure repsonse, flexibility and chemical resistence it is a suitable choice for paper, wood, and metal. CN116 is particularly suited to lithographic ink applications, due to enhanced hydrophobic char...view more CN116 is a modified epoxy acrylate oligomer. It has fast cure repsonse, flexibility and chemical resistence it is a suitable choice for paper, wood, and metal. CN116 is particularly suited to lithographic ink applications, due to enhanced hydrophobic character relative to standard bisphenol A epoxy acrylates. view less | |
| CN117 | Sartomer Americas | CN117 is a modified epoxy acrylate that offers the fast cure speed and chemical resistence typical of epoxy acrylates. CN117 imparts toughness and flexibility to cured lithographic and screen ink and paper, plastic and wood coatings. CN117 also imparts de...view more CN117 is a modified epoxy acrylate that offers the fast cure speed and chemical resistence typical of epoxy acrylates. CN117 imparts toughness and flexibility to cured lithographic and screen ink and paper, plastic and wood coatings. CN117 also imparts desirable properties to laminating adhesives. view less | |
| CN118 | Sartomer Americas | CN118 is a high molecular weight, acid modified epoxy acrylate. It allows pigment wetting, good chemical and water resistance, and high gloss. CN118 is recommended for use in screen and lithographic ink, overprint varnishes, and coatings for paper, metal ...view more CN118 is a high molecular weight, acid modified epoxy acrylate. It allows pigment wetting, good chemical and water resistance, and high gloss. CN118 is recommended for use in screen and lithographic ink, overprint varnishes, and coatings for paper, metal and plastics. view less | |
| CN119 | Sartomer Americas | CN119 is an amine modified epoxy acrylate providing flexibility, expectionally fast cure, and chemical resistance. Suggested applications include adhesives, laminating and pressure sensitive adhesives, coatings, paper, plastic and wood coatings, electroni...view more CN119 is an amine modified epoxy acrylate providing flexibility, expectionally fast cure, and chemical resistance. Suggested applications include adhesives, laminating and pressure sensitive adhesives, coatings, paper, plastic and wood coatings, electronics and inks. view less | |
| CN120A75 | Sartomer Americas | CN120A75 is a difunctional bisphenol A based epoxy acrylate blended with SR-306. It provides a good balance of water properties and high reactivity. The base oligomer, CN-120, offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. CN1...view more CN120A75 is a difunctional bisphenol A based epoxy acrylate blended with SR-306. It provides a good balance of water properties and high reactivity. The base oligomer, CN-120, offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. CN120A75 imparts chemical resistance, film hardness and high reactivity. Suggested applications include adhesives, coatings, electronics and inks. view less | |
| CN120C60 | Sartomer Americas | CN120C60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR351, trimethylol propane triacrylate. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomer's bisphenol A based...view more CN120C60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR351, trimethylol propane triacrylate. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomer's bisphenol A based epoxy acrylates. Performance properties for this product are good adhesion, good chemical resistance, good hardness, good water resistance and high abrasion resistance. Suggested applications include adhesives, binder adhesives, pressure sensitive and structural adhesives, coatings, floor, metal, plastic and paper coatings, electronics, inks, flexo and gravure inks, offset and screen inks and sealants. view less | |
| CN120C80 | Sartomer Americas | CN120C80 is a difunctional bisphenol A based epoxy acrylate blended with 20% SR-351.It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested application...view more CN120C80 is a difunctional bisphenol A based epoxy acrylate blended with 20% SR-351.It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor,metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. view less | |
| CN120D80 | Sartomer Americas | CN120D80 difunctional bisphenol A based epoxy acrylate blended with 20% SR-9020. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications i...view more CN120D80 difunctional bisphenol A based epoxy acrylate blended with 20% SR-9020. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor, metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. view less | |
| CN120Z | Sartomer Americas | CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, ana...view more CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor, metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. view less | |
| CN131 | Sartomer Americas | CN131 is a low viscosity aromatic monoacrylate oligomer. It is used to produce fast curing and strong yet flexible free radically cured films. CN131 imparts chemical resistance, high elongation and hydroxyl functionality. Suggested applications include co...view more CN131 is a low viscosity aromatic monoacrylate oligomer. It is used to produce fast curing and strong yet flexible free radically cured films. CN131 imparts chemical resistance, high elongation and hydroxyl functionality. Suggested applications include coatings, floor, glass, metal and plastic coatings, Electronics, Electronics photoresists and Inks. view less | |
| CN131B | Sartomer Americas | CN131B is a low viscosity aromatic monoacrylate oligomer that us used to produce fast curing, strong and flexible cured films. CN131B has lower residuals to assist compliance with FDA packaging requirements. Suggested applications include floor, glass, me...view more CN131B is a low viscosity aromatic monoacrylate oligomer that us used to produce fast curing, strong and flexible cured films. CN131B has lower residuals to assist compliance with FDA packaging requirements. Suggested applications include floor, glass, metal, and plastic coatings, electronics, photoresists, and inks. view less | |
| CN132 | Sartomer Americas | CN132 is a low viscosity aliphatic diacrylate oligomer. CN132 is fast curing, chemical resistant, and produces strong, flexible films. CN132 is recommended for applications requiring high reactivity and low viscosity. Suggested applications include coatin...view more CN132 is a low viscosity aliphatic diacrylate oligomer. CN132 is fast curing, chemical resistant, and produces strong, flexible films. CN132 is recommended for applications requiring high reactivity and low viscosity. Suggested applications include coatings, paper and wood coatings and inks. view less | |
| CN133 | Sartomer Americas | CN133 is a low viscosity aliphatic triacrylate oligomer. CN133 is fast curing, chemical resistant, and produces strong, flexible films. CN133 is recommended for applications where good film strength and hardness are required. Suggested applications includ...view more CN133 is a low viscosity aliphatic triacrylate oligomer. CN133 is fast curing, chemical resistant, and produces strong, flexible films. CN133 is recommended for applications where good film strength and hardness are required. Suggested applications include coatings, floor, metal and wood coatings, electronics, solder masks, inks, and overprint varnishes. view less | |
| CN136 | Sartomer Americas | CN136 is an amine-modified version of bisphenol A based epoxy acrylate providing a good balance of water properties, high reactivity and exceptionally fast cure. Suggested applications are adhesives, anaerobic, binder, pressure sensitive and structural ad...view more CN136 is an amine-modified version of bisphenol A based epoxy acrylate providing a good balance of water properties, high reactivity and exceptionally fast cure. Suggested applications are adhesives, anaerobic, binder, pressure sensitive and structural adhesives, coatings, floor, metal, paper and plastic adhesives, electronics, inks, flexo, gravure, offset and screen Inks. view less | |
| CN146 | Sartomer Americas | CN146 is an adhesion promoting acrylic oligomer that is used in free radical-curable applications, including adhesives, coatings, solder masks and photoresists. CN146 has excellent adhesion to metal and plastics, low viscosity and is soluble in caustic so...view more CN146 is an adhesion promoting acrylic oligomer that is used in free radical-curable applications, including adhesives, coatings, solder masks and photoresists. CN146 has excellent adhesion to metal and plastics, low viscosity and is soluble in caustic solutions. view less | |
| CN147 | Sartomer Americas | CN147 is an acidic acrylate oligomer. It is used as an adhesion promoter in UV-curable coatings and laminating adhesives. CN147 imparts flexibility, impact strength and weatherability. | |
| CN153 | Sartomer Americas | CN153 is an epoxy acrylate oligomer that has both acrylate and epoxy functionality on the same backbone. The epoxy ring will readily react with amines or acids. The CN153 is mainly used in systems where dual cure is necessary to achieve a thorough cure or...view more CN153 is an epoxy acrylate oligomer that has both acrylate and epoxy functionality on the same backbone. The epoxy ring will readily react with amines or acids. The CN153 is mainly used in systems where dual cure is necessary to achieve a thorough cure or lower shrinkage. Suggested applications include adhesives, laminating and pressure sensitive adhesives, coatings, metal, plastic and wood coatings, electronics, and screen inks. view less | |
| CN154 | Sartomer Americas | CN154 is a clear liquid bisphenol A epoxy methacrylate oligomer. This oligomer will cure more slowly than the acrylate equivalent. This product is recommended for use in electronic solder masks, potting compounds, composites, or any application where high...view more CN154 is a clear liquid bisphenol A epoxy methacrylate oligomer. This oligomer will cure more slowly than the acrylate equivalent. This product is recommended for use in electronic solder masks, potting compounds, composites, or any application where high temperature resistance and hardness are needed. Some additional applications where CN154 are wood and metal coatings and stereolithography. view less | |
| CN160 | Sartomer Americas | CN160 is an acrylated linseed oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks. CN160 can also be used in various energy curable formulati...view more CN160 is an acrylated linseed oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks. CN160 can also be used in various energy curable formulations to increase the hydrophobicity of these systems. view less | |
| CN1964 | Sartomer Americas | CN1964 is a low molecular weight urethane dimethacrylate commonly used as the main oligomer in UV and peroxide cured dental, cosmetic, and medical coatings and composites. Performance properties include good chemical resistance, good hardness, good water ...view more CN1964 is a low molecular weight urethane dimethacrylate commonly used as the main oligomer in UV and peroxide cured dental, cosmetic, and medical coatings and composites. Performance properties include good chemical resistance, good hardness, good water resistance, and solvent resistance. view less | |
| CN1966 | Sartomer Americas | CN1966 is a high molecular weight, difunctional urethane acrylate. On cure, it can undergo a phase separation process to improve the toughness of some formulations. | |
| CN1967 | Sartomer Americas | CN1967 is a difunctional aliphatic urethane acrylate oligomer. It imparts flexibility and abrasion resistance to UV/EB-cured inks and coatings. CN1967 is also non-yellowing and low in color. | |
| CN1968 | Sartomer Americas | CN1968 is a low viscosity urethane methacrylate oligomer showing good balance of tensile strength and elongation. Low color and non-yellowing performance. | |
| CN1969 | Sartomer Americas | CN1969 is a high performance urethane methacrylate oligomer showing a good balance of strength and flexibility. | |
| CN1970 | Sartomer Americas | CN1970 is an aliphatic nonpolar urethane methacrylate useful in personal care and high performance applications. | |
| CN2003A | Sartomer Americas | CN2003A is a modified epoxy acrylate oligomer that imparts flexibility, excellent adhesion, and low shrinkage to UV/EB curable coating, ink, and adhesive applications. CN2003A can be used on a variety of substrates, including plastics, metals, and w...view more CN2003A is a modified epoxy acrylate oligomer that imparts flexibility, excellent adhesion, and low shrinkage to UV/EB curable coating, ink, and adhesive applications. CN2003A can be used on a variety of substrates, including plastics, metals, and wood. view less | |
| CN2102 E | Sartomer Americas | CN2102 E is an epoxy acrylate designed for UV/EB-cured inks and coatings. CN2102 E combines excellent pigment dispersion properties with fast cure response. Suggested applications are paper and wood, flexo and inkjet inks. | |
| CN2204 | Sartomer Americas | CN2204 is a tetrafunctional epoxy acrylate with good wet offset ink performance. CN2204 has good pigment wetting properties and emulsion stability on offset presses. CN2204 is used as the majority of the resin base. Cure speed and gloss are enhanced with ...view more CN2204 is a tetrafunctional epoxy acrylate with good wet offset ink performance. CN2204 has good pigment wetting properties and emulsion stability on offset presses. CN2204 is used as the majority of the resin base. Cure speed and gloss are enhanced with CN2204 in offset inks. view less | |
| CN2207 | Sartomer Americas | CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and ver...view more CN2207 is a polyester acrylate oligomer designed for UV/EB lithographic inks. It exhibits good pigment wetting characteristics and will yield inks with high viscosity and low tack. On-press performance is enhanced because of the good water balance and very fast cure speed. Suggested applications are coatings, metal and wood coatings, litho, offset and screen inks. view less | |
| CN2261LV | Sartomer Americas | CN2261LV is a polyester acrylate oligomer. CN2261LV was developed for UV curable wood and floor coating applications, where hardness and abrasion resistance are required. CN2261LV demonstrates excellent cure rates and impact strength. | |
| CN2262 | Sartomer Americas | CN2262 is a polyester acrylate oligomer with a Primary Irritation Index (PII) of zero. CN2262 was developed for sprayable UV curable wood coatings applications where hardness and abrasion resistance are required. CN2262 demonstrates excellent cure rates a...view more CN2262 is a polyester acrylate oligomer with a Primary Irritation Index (PII) of zero. CN2262 was developed for sprayable UV curable wood coatings applications where hardness and abrasion resistance are required. CN2262 demonstrates excellent cure rates and intra-coat adhesion. view less | |
| CN2264 | Sartomer Americas | CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, esp...view more CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, especially where hardness and abrasion resistance are required, specifically for wood, paper, and flooring coatings and screen, inkjet, and flexo inks. view less | |
| CN2270 | Sartomer Americas | CN2270 provides good pigment wetting, low viscosity and adhesion to polyolefins and vinyl substrates. When used in UV curable inks and clear coatings, CN2270 should be accompanied by a higher viscosity resin, such as CN119 or CN293, to improve three-roll ...view more CN2270 provides good pigment wetting, low viscosity and adhesion to polyolefins and vinyl substrates. When used in UV curable inks and clear coatings, CN2270 should be accompanied by a higher viscosity resin, such as CN119 or CN293, to improve three-roll mill pigment dispersing. view less | |
| CN2271E | Sartomer Americas | CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oli...view more CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oligomer is perfect for diluting epoxy acrylates, improving adhesion, and increasing the cure rate. Recommended uses are coatings, flexo, gravure and offset inks. view less | |
| CN2273 | Sartomer Americas | CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithograp...view more CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithographic inks. Its flexibility, low viscosity, and fast surface cure speed make CN2273 suitable for overprint varnishes and coatings requiring low odor. view less | |
| CN2279 | Sartomer Americas | CN2279 is a clear liquid, polyester acrylate grinding vehicle which has low viscosity and good pigment wetting. Dispersions and inks made with this product, exhibit low viscosity, excellent flow, excellent stability, and good color strength. It also shows...view more CN2279 is a clear liquid, polyester acrylate grinding vehicle which has low viscosity and good pigment wetting. Dispersions and inks made with this product, exhibit low viscosity, excellent flow, excellent stability, and good color strength. It also shows good adhesion, low shrinkage, and high flexibilty. CN2279 is designed for UV ink jet and UV flexographic markets. view less | |
| CN2283 | Sartomer Americas | CN2283 is a polyester acrylate that has utility in a number of different applications. The oligomer exhibits good cure response coupled with flexibility and hydrophobicity. Suggested applications include: Adhesives, laminating, Coatings, metal, Coatings, ...view more CN2283 is a polyester acrylate that has utility in a number of different applications. The oligomer exhibits good cure response coupled with flexibility and hydrophobicity. Suggested applications include: Adhesives, laminating, Coatings, metal, Coatings, plastic, Coatings, wood, Electronics, Inks, flexo, Inks, inkjet, inks, letterpress, Inks, litho, Inks, offset, inks, rotary screen, and Inks, screen. view less | |
| CN2285 | Sartomer Americas | CN2285 is an acrylic oligomer especially developed for UV/EB-cure thermoforming applications. CN2285 is a low viscosity, high refractive index product that is also suited to paper and plastics coatings and inks. | |
| CN2295 | Sartomer Americas | CN2295 is a hexafunctional polyester acrylate oligomer developed for energycurable ink systems. CN2295 imparts low water pickup, good flow, and good pigment wetting to litho or offset inks. CN2295 can be used in various energy-curable formulations to incr...view more CN2295 is a hexafunctional polyester acrylate oligomer developed for energycurable ink systems. CN2295 imparts low water pickup, good flow, and good pigment wetting to litho or offset inks. CN2295 can be used in various energy-curable formulations to increase hydrophobicity. view less | |
| CN2302 | Sartomer Americas | CN2302 is a hyperbranched polyester acrylate oligomer designed with low viscosity and high functionality. Suggested applications include metal, water-based and plastic coatings, electronics, and flexo and Inkjet inks. | |
| CN2303 | Sartomer Americas | CN2303 is a hyperbranched polyester acrylate oligomer designed with low viscosity and high functionality. CN2303 possesses Low viscosity and fast surface cure. CN2303 is suited to UV/EB cured inks, hardcoats, plastic and water-based coatings. | |
| CN2304 | Sartomer Americas | CN2304 is a hyperbranched polyester acrylate oligomer designed with low viscosity and high functionality. CN2304 possesses low viscosity and fast surface cure. CN2304 is suited to UV/EB-cured inks, hardcoats, plastic and water-based coatings. | |
| CN2601 | Sartomer Americas | CN2601 is a brominated aromatic acrylate oligomer. CN2601 is a high refractive index product that functions as a flame retardant component in radiation-curable coatings. Suggested applications include flame retardant and high refractive index coatings, El...view more CN2601 is a brominated aromatic acrylate oligomer. CN2601 is a high refractive index product that functions as a flame retardant component in radiation-curable coatings. Suggested applications include flame retardant and high refractive index coatings, Electronics, and Laminates. view less | |
| CN2910 | Sartomer Americas | CN2910 is an acrylic oligomer designed to meet the low odor, low extractable, and BPA-free requirements of high end food packaging coatings. The oligomer boasts equivalent coating performance to bisphenol-A digycidyl ether (BPADGE) diacrylate oligomers, w...view more CN2910 is an acrylic oligomer designed to meet the low odor, low extractable, and BPA-free requirements of high end food packaging coatings. The oligomer boasts equivalent coating performance to bisphenol-A digycidyl ether (BPADGE) diacrylate oligomers, while meeting the requirements. Recommended uses for CN2910 are metal, paper, paperboard and plastic coatings, inkjet, rotary screen and screen inks. view less | |
| CN2911 | Sartomer Americas | CN2911 is a bisphenol A-free oligomer for use in UV and EB curing compositions. | |
| CN292 | Sartomer Americas | CN292 is a multifunctional, low viscosity polyester acrylate designed as a general purpose fast reacting oligomer. Its excellent wetting properties make CN292 suitable for inks, particularly flexographic inks. | |
| CN2920 | Sartomer Americas | CN2920 is an aliphatic urethane acrylate oligomer developed for UV/EB curable inks, coatings and adhesives. It provides excellent hardness and weatherability. CN2920 also imparts chemical resistance, heat resistance, impact strength and low shrinkage. Su...view more CN2920 is an aliphatic urethane acrylate oligomer developed for UV/EB curable inks, coatings and adhesives. It provides excellent hardness and weatherability. CN2920 also imparts chemical resistance, heat resistance, impact strength and low shrinkage. Suggested applications include adhesives, coatings, and photopolymers and photoresists electronics, and screen inks. view less | |
| CN2921 | Sartomer Americas | CN2921 is an aliphatic urethane acrylate oligomer developed for UV curable coating and ink applications where adhesion and excellent weathering resistance are required. CN2921 adheres to plastics and polycarbonates and has good flexibility. | |
| CN293 | Sartomer Americas | CN293 is a hexafunctional acrylated polyester oligomer that demonstrates good pigment wetting and fast cure response. CN293 is recommended for use in lithographic and flexographic ink formulations, as well as abrasion resistant coatings. | |
| CN294E | Sartomer Americas | CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment...view more CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment wetting. CN294E is used in UV curable coatings and inks including metal, paper, and plastic coatings and flexographic, screen, and lithographic inks. view less | |
| CN296 | Sartomer Americas | CN296 is a hexafunctional polyester acrylate oligomer that demonstrates good pigment wetting and fast cure in lithographic and flexographic inks and abrasion resistant coatings. | |
| CN299 | Sartomer Americas | CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including me...view more CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including metal, plastic, and paper coatings as well as flexographic, screen, and lithographic inks. This product also has good chemical resistance, good heat resistance, high abrasion resistance and good adhesion. view less | |
| CN301 | Sartomer Americas | CN301 is a polybutadiene dimethacrylate. It is a flexible, hydrophobic oligomer with excellent electrical properties. It offers excellent pigment wetting, and allows high filler loadings. Additionally, cured films of CN301 resist acid, alkali, and high hu...view more CN301 is a polybutadiene dimethacrylate. It is a flexible, hydrophobic oligomer with excellent electrical properties. It offers excellent pigment wetting, and allows high filler loadings. Additionally, cured films of CN301 resist acid, alkali, and high humidity. Adhesives, coatings, barrier and conformal coatings, electronics and photopolymers, solder masks, and sealants are the recommended uses for CN301. view less | |
| CN303 | Sartomer Americas | CN303, polybutadiene dimethacrylate, is a flexible, hydrophobic oligomer with excellent electrical properties. Cured films of CN303 resist acid, alkali, and high humidity. Suggested applications include adhesives, barrier and conformal coatings, electroni...view more CN303, polybutadiene dimethacrylate, is a flexible, hydrophobic oligomer with excellent electrical properties. Cured films of CN303 resist acid, alkali, and high humidity. Suggested applications include adhesives, barrier and conformal coatings, electronics, photopolymers, solder masks, and sealants. view less | |
| CN307 | Sartomer Americas | CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated int...view more CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated into peroxide cured natural and synthetic rubber systems, where it improves mechanical and performance properties. view less | |
| CN309 | Sartomer Americas | CN309 is comprised of acrylate esters based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking the CN309 will have a low Tg, low crosslink density, ...view more CN309 is comprised of acrylate esters based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking the CN309 will have a low Tg, low crosslink density, and will be flexible. Suggested applications include: laminating and pressure sensitive adhesives, metal, plastic and wood coatings, electronics, flexo, letterpress, litho, offset, rotary screen and screen inks, and sealants. view less | |
| CN3100 | Sartomer Americas | CN3100 is a low viscosity oligomer that features high elongation, good chemical resistance, and hydroxyl functionality. CN3100 is used in adhesives, inks and glass, metal, plastic and paper coatings. | |
| CN3105 | Sartomer Americas | CN3105 is a low viscosity oligomer that demonstrates hydroxyl functionality, high elongation, and good chemical resistance in adhesive, ink, and glass, metal, paper and plastic coating applications. | |
| CN3715 | Sartomer Americas | CN3715 is an acrylated amine synergist with good reactivity, high flexibility and low pigment bleeding that improve surface cure when used with a suitable photoinitiator system. | |
| CN383 | Sartomer Americas | CN383 is a monofunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odor, both at press side and in the cured film, and reduced ...view more CN383 is a monofunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odor, both at press side and in the cured film, and reduced blooming. view less | |
| CN4002 | Sartomer Americas | CN4002 is a fluorinated acrylate oligomer featuring low surface energy, low viscosity, and low refractive index. It is used in UV/EB-cured coatings, electronics, and inks applications. CN4002 is effective in antistain coatings. | |
| CN549 | Sartomer Americas | CN549 is a low viscosity acrylic oligomer. CN549 demonstrates low odor, high gloss, and fast UV/EB cure response. It is especially suited to coatings, inks, and overprint varnish applications. | |
| CN550 | Sartomer Americas | CN550 is a medium viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. CN550 can be used as the sole binder or with monomer diluents. Alternatively, CN550 can be used in combination with other oligomers...view more CN550 is a medium viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. CN550 can be used as the sole binder or with monomer diluents. Alternatively, CN550 can be used in combination with other oligomers. Paper and wood coatings are the recommended uses for this product. view less | |
| CN6500 | Sartomer Americas | CN6500 is an acrylate oligomer developed for use in UV/EB curable soft feel ink and coating formulations. Use CN6500 alone for silky coatings or with CN6502 for velvety coatings. CN6500 is intended for use in solventborne formulations, but can also be for...view more CN6500 is an acrylate oligomer developed for use in UV/EB curable soft feel ink and coating formulations. Use CN6500 alone for silky coatings or with CN6502 for velvety coatings. CN6500 is intended for use in solventborne formulations, but can also be formulated for use in 100% solids systems. view less | |
| CN6501 | Sartomer Americas | CN6501 is an acrylate oligomer designed for use in UV/EB curable soft feel inks and coatings formulations. CN6501 is intended for use in solventborne formulations, but can also be formulated for use in 100% solids systems. | |
| CN6502 | Sartomer Americas | CN6502 is an acrylate oligomer developed for use in UV and EB soft feel inks and coatings. It is used with CN6500 to create velvety coatings. CN6502 is intended for use in solventborne formulations, but can also be formulated for use in 100% solids system...view more CN6502 is an acrylate oligomer developed for use in UV and EB soft feel inks and coatings. It is used with CN6500 to create velvety coatings. CN6502 is intended for use in solventborne formulations, but can also be formulated for use in 100% solids systems. view less | |
| CN6510 | Sartomer Americas | CN6510 is an acrylate oligomer developed for 100% solids UV soft feel applications. Use CN6510 for an excellent velvety/rubbery feel effect with increased abrasion resistance. | |
| CN6511 | Sartomer Americas | CN6511 is an acrylate oligomer developed for 100% solids UV soft feel applications. CN6511 gives a Velvety/rubbery feel effect with good solvent resistance. | |
| CN6512 | Sartomer Americas | CN6512 is an acrylate oligomer developed for 100% solids UV soft feel applications. Use CN6512 for a silky feel with the best stain and solvent resistance. | |
| CN6513 | Sartomer Americas | CN6513 is a high viscosity acrylate oligomer developed for 100% solids UV soft feel applications. Use CN6513 for an excellent velvety feel with abrasion resistance. | |
| CN704 | Sartomer Americas | CN704 is an acrylated polyester adhesion promoter that provides excellent adhesion to polyolefins, such as polyethylene and polypropylene. CN704 is designed for UV/EB cured inks and coatings. Due to its low acid value, CN704 can be used in formulations co...view more CN704 is an acrylated polyester adhesion promoter that provides excellent adhesion to polyolefins, such as polyethylene and polypropylene. CN704 is designed for UV/EB cured inks and coatings. Due to its low acid value, CN704 can be used in formulations containing tertiary amines. view less | |
| CN820 | Sartomer Americas | CN820 is a free radical-curable acrylic oligomer. It is especially recommended for inks, adhesives, and coatings for difficult substrates, such as untreated polyester, polypropylene, and polystryrene. Performance properties include good adhesion and ...view more CN820 is a free radical-curable acrylic oligomer. It is especially recommended for inks, adhesives, and coatings for difficult substrates, such as untreated polyester, polypropylene, and polystryrene. Performance properties include good adhesion and high flexibility. view less |
