UL Prospector
Prospector

Success!

Successfully saved your search
13 Results
CN307 Sartomer Americas CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated int...view more CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated into peroxide cured natural and synthetic rubber systems, where it improves mechanical and performance properties. view less
Rovene® 4002 Mallard Creek Polymers, Inc. Rovene® 4002 is an anionic styrene-butadiene emulsion designed to have good freeze thaw stability and low odor characteristics. It is recommended for use in architectural coatings including flat wall paints and primer-sealers where low perm ratings are ne...view more Rovene® 4002 is an anionic styrene-butadiene emulsion designed to have good freeze thaw stability and low odor characteristics. It is recommended for use in architectural coatings including flat wall paints and primer-sealers where low perm ratings are needed (0.5 - 1.0 perms). view less
Rovene® 4009 Mallard Creek Polymers, Inc. Rovene® 4009 is a carboxylated styrene-butadiene emulsion that exhibits an excellent balance of water resistance, grease and oil resistance, and low moisture vapor transmission. It can be compounded into highly water and grease resistant paper and board c...view more Rovene® 4009 is a carboxylated styrene-butadiene emulsion that exhibits an excellent balance of water resistance, grease and oil resistance, and low moisture vapor transmission. It can be compounded into highly water and grease resistant paper and board coatings. view less
Rovene® 4019 Mallard Creek Polymers, Inc. Rovene® 4019 is a carboxylated styrene-butadiene emulsion that has a firm hand with excellent strength properties. It is recommended for use in paper and paperboard coatings where a high degree of grease, oil and water resistance is needed.
Rovene® 4049 Mallard Creek Polymers, Inc. Rovene® 4049 is a carboxylated styrene-butadiene emulsion that has a medium hand with above average strength properties. It is recommended for use in specialty paper coatings, textile and nonwovens, adhesives and paper lamination where high water and grea...view more Rovene® 4049 is a carboxylated styrene-butadiene emulsion that has a medium hand with above average strength properties. It is recommended for use in specialty paper coatings, textile and nonwovens, adhesives and paper lamination where high water and grease resistance films with low moisture vapor transmission is needed. view less
Rovene® 4106 Mallard Creek Polymers, Inc. Rovene® 4106 is a carboxylated styrene-butadiene emulsion that has a very stiff or “boardy” hand, to boost gloss and reduce surface tack. It can be used to enhance gloss on coated printing papers and paperboard.
Rovene® 4111 Mallard Creek Polymers, Inc. Rovene® 4111 is an anionic styrene-butadiene emulsion designed to provide additional opacity in inks. It was designed with a specific particle size that greatly improves the spacing between titanium dioxide particles resulting in increased opacity.
Rovene® 4119 Mallard Creek Polymers, Inc. Rovene® 4119 is a carboxylated styrene-butadiene emulsion that has a firm hand with excellent strength properties. It imparts a good wet/dry tensile strength, and has good adhesion to a wide variety of surfaces.
Rovene® 5499 Mallard Creek Polymers, Inc. Rovene® 5499 is a film forming styrene-butadiene emulsion that has excellent adhesion to thermoplastic polyolefin (TPO) based substrates for wall coverings. It can be formulated for metallic ink vehicles.
Rovene® 9410 Mallard Creek Polymers, Inc. Rovene® 9410 is a very soft carboxylated styrene-butadiene emulsion for the formulation of pressure sensitive adhesives. It is specifically designed for formulation of pressure sensitive adhesives.
Tykote® 1004 Mallard Creek Polymers, Inc. Tykote® 1004 is an anionic carboxylated styrene-butadiene copolymer latex designed for use in functional coatings. It provides high strength and pigment compatibility.
Tykote® 1005 Mallard Creek Polymers, Inc. Tykote® 1005 is designed as a base resin for functional coatings. It provides high strength and pigment compatibility. This low surfactant containing copolymer can be used to compound functional coatings exhibiting superior water, water vapor, oil and gre...view more Tykote® 1005 is designed as a base resin for functional coatings. It provides high strength and pigment compatibility. This low surfactant containing copolymer can be used to compound functional coatings exhibiting superior water, water vapor, oil and grease repellency. This firm polymer also gives rise to blocking resistant coatings. Tykote® 1005 exhibits excellent mechanical stability and can be applied to a variety of substrates using many different application methods. view less
Tykote® 1019 Mallard Creek Polymers, Inc. Tykote® 1019 is a carboxylated styrene-butadiene emulsion that has a firm hand with excellent film strength properties designed for use in functional coatings. It is intended for use as a base polymer in the formulation of barrier coatings for paper and p...view more Tykote® 1019 is a carboxylated styrene-butadiene emulsion that has a firm hand with excellent film strength properties designed for use in functional coatings. It is intended for use as a base polymer in the formulation of barrier coatings for paper and paperboard packaging. view less