| 200W™ | Univar Solutions | 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grout...view more 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grouts, ceramics, and coatings. view less | Request Sample |
| 40-200™ | Univar Solutions | 40-200™ is a dry ground marble with a coarse particle size controlled between 40 and 200 mesh screens. It is widely used in applications with high loading levels such as cement finishes, textured coatings, and abrasives. | Request Sample |
| ACLYN 295-A | Univar Solutions | ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carri...view more ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carrier. view less | Request Sample |
| ACRYSOL™ ASE-60 | Univar Solutions | ACRYSOL™ ASE-60 is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for latex coatings. When neutralized with a base, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly ...view more ACRYSOL™ ASE-60 is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for latex coatings. When neutralized with a base, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly shear-thinning characteristics. This product is delivered as a high-solids liquid for ease of handling in manufacturing. view less | Request Sample |
| ACRYSOL™ ASE-75 | Univar Solutions | ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in imp...view more ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in improving mid to low shear rate (Brookfield) viscosity, resulting in coatings that have highly shear thinning characteristics. view less | Request Sample |
| ACRYSOL™ DR-1 | Univar Solutions | ACRYSOL™ DR-1 is a synthetic, liquid thickener that offers a low cost/high performance alternative to cellulosic thickeners in interior flat latex paints. This product provides application and feel properties very similar to medium grades of cellulosic an...view more ACRYSOL™ DR-1 is a synthetic, liquid thickener that offers a low cost/high performance alternative to cellulosic thickeners in interior flat latex paints. This product provides application and feel properties very similar to medium grades of cellulosic and hydrophobically modified HEC thickeners with excellent resistance to roller spattering and improved leveling in most formulations. This product is easy to handle and incorporate during the paint manufacturing process and is highly resistant to microbial attack. view less | Request Sample |
| ACRYSOL™ DR-110 | Univar Solutions | ACRYSOL™ DR-110 is an APEO-free*, solvent free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. It is a cost effective alternative to HMHEC for thickening a full range of waterborne latex coatings. It i...view more ACRYSOL™ DR-110 is an APEO-free*, solvent free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. It is a cost effective alternative to HMHEC for thickening a full range of waterborne latex coatings. It is effective at building viscosity in formulations from flat to semi-gloss and across all binder types, offering desirable application and feel properties, plus the cost advantage of better efficiency and the manufacturing ease of an all-liquid product. view less | Request Sample |
| ACRYSOL™ DR-2 | Univar Solutions | ACRYSOL™ DR-2 is a synthetic, liquid thickener that offers a low cost/high performance alternative to medium grade cellulosic thickeners in interior flat latex paints, with outstanding spatter resistance. It is easy to handle and incorporate into the pain...view more ACRYSOL™ DR-2 is a synthetic, liquid thickener that offers a low cost/high performance alternative to medium grade cellulosic thickeners in interior flat latex paints, with outstanding spatter resistance. It is easy to handle and incorporate into the paint and is formulated to resist microbial contamination. view less | Request Sample |
| ACRYSOL™ DR-5500 | Univar Solutions | ACRYSOL™ DR-5500 is an APEO-free*, solvent-free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. The product is effective in improving the high shear (ICI) viscosity of waterborne coatings, resulting in...view more ACRYSOL™ DR-5500 is an APEO-free*, solvent-free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. The product is effective in improving the high shear (ICI) viscosity of waterborne coatings, resulting in coatings that have high film build characteristicsfor improved hiding and appearance. It is delivered as a low viscosity liquid to allow for easy handling and easy incorporation during the manufacturing process. view less | Request Sample |
| ACRYSOL™ DR-6600 | Univar Solutions | ACRYSOL™ DR-6600 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product is effective in improving the high shear viscosity, resulting in coatings that have high ...view more ACRYSOL™ DR-6600 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product is effective in improving the high shear viscosity, resulting in coatings that have high film build characteristics for improved hiding and appearance. It is supplied as a low viscosity liquid that is easy to handle and incorporate during the manufacturing process. view less | Request Sample |
| ACRYSOL™ DR-72 | Univar Solutions | ACRYSOL™ DR-72 is a synthetic, liquid, anionic associative rheology modifier that offers a single, low cost / high performance alternative to cellulosic thickeners in interior flat, sheen, and satin latex paints. It can be used in structured paints and re...view more ACRYSOL™ DR-72 is a synthetic, liquid, anionic associative rheology modifier that offers a single, low cost / high performance alternative to cellulosic thickeners in interior flat, sheen, and satin latex paints. It can be used in structured paints and replace high molecular weight HEC in renders, plasters and trowelable products. view less | Request Sample |
| ACRYSOL™ DR-73 | Univar Solutions | ACRYSOL™ DR-73 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. This product builds efficient mid-shear (KU) and ICI (high shear) viscosity, which offers application a...view more ACRYSOL™ DR-73 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. This product builds efficient mid-shear (KU) and ICI (high shear) viscosity, which offers application and feel properties similar to medium grades of HEC and HMHEC cellulosic thickeners, as well as increased high shear viscosity for higher film build, brush drag and hiding. . view less | Request Sample |
| ACRYSOL™ I-62 A | Univar Solutions | ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially...view more ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially useful in formulations designed for thermosetting applications. It is a waterborne colloidal dispersion containing both carboxylic acid and hydroxyl functionality, and as such will crosslink with melamine-formaldehyde or urea-formaldehyde resins, thereby becoming part of the polymer matrix and improving the film properties. view less | Request Sample |
| ACRYSOL™ RM-1020 | Univar Solutions | ACRYSOL™ RM-1020 is a low solids, ammonium polyacrylate solution which has been designed as a thickening agent for water borne paints, offering easy handling and addition during paint manufacture. It offers improvement in flow and leveling performance com...view more ACRYSOL™ RM-1020 is a low solids, ammonium polyacrylate solution which has been designed as a thickening agent for water borne paints, offering easy handling and addition during paint manufacture. It offers improvement in flow and leveling performance compared to paints using cellulosic thickeners. view less | Request Sample |
| ACRYSOL™ RM-12W | Univar Solutions | ACRYSOL™ RM-12W is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It is designed to offer high low-shear (Brookfield) viscosity with an extremely shear thinning rheology and excellent thickening ef...view more ACRYSOL™ RM-12W is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It is designed to offer high low-shear (Brookfield) viscosity with an extremely shear thinning rheology and excellent thickening efficiency. This rheology profile helps improve brush/roller loading, while offering good anti-drip properties, good in-can structure, and an excellent flow/sag balance. view less | Request Sample |
| ACRYSOL™ RM-2020 NPR | Univar Solutions | ACRYSOL™ RM-2020 NPR is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This offers efficient high-shear (ICI) viscosity build and a Newtonian rheology profile. It can be used either alone or in combi...view more ACRYSOL™ RM-2020 NPR is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This offers efficient high-shear (ICI) viscosity build and a Newtonian rheology profile. It can be used either alone or in combination with other rheology modifiers to impart excellent flow and leveling, film build, gloss development, and water resistance. view less | Request Sample |
| ACRYSOL™ RM-3000 | Univar Solutions | ACRYSOL™ RM-3000 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It offers a shear rate profile that is highly Newtonian, which makes it very useful for building high-shear (ICI) viscosity and ob...view more ACRYSOL™ RM-3000 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It offers a shear rate profile that is highly Newtonian, which makes it very useful for building high-shear (ICI) viscosity and obtaining excellent flow and leveling. It offers ICI efficiency between ACRYSOL™ RM-2020 NPR and ACRYSOL™ RM-5000. view less | Request Sample |
| ACRYSOL™ RM-3030 | Univar Solutions | ACRYSOL™ RM-3030 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal ...view more ACRYSOL™ RM-3030 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal KU response. This product has demonstrated improved flow and leveling, improved syneresis resistance, and good film build in flat to gloss formulations. view less | Request Sample |
| ACRYSOL™ RM-400 | Univar Solutions | ACRYSOL™ RM-400 is a solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, designed as a KU-building associative thickener offering formulators an excellent balance of sag resistance, particularly in tinted paints, flow...view more ACRYSOL™ RM-400 is a solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, designed as a KU-building associative thickener offering formulators an excellent balance of sag resistance, particularly in tinted paints, flow and leveling, and gloss development for interior and exterior paints. It also contributes significant ICI viscosity, allowing the reduction of ICI builder to approximately 25% of other starting point formulations. view less | Request Sample |
| ACRYSOL™ RM-5000 | Univar Solutions | ACRYSOL™ RM-5000 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It offers a shear rate profile that gives a good balance of flow and leveling as well as high film build. | Request Sample |
| ACRYSOL™ RM-6000 | Univar Solutions | ACRYSOL™ RM-6000 is a non-ionic urethane rheology modifier based on solvent-free technology, offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and...view more ACRYSOL™ RM-6000 is a non-ionic urethane rheology modifier based on solvent-free technology, offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. It has demonstrated utility in a broad range of emulsions, including the “newer generation,” low-VOC type resins like RHOPLEX™ SG-30 and RHOPLEX™ ML-300. view less | Request Sample |
| ACRYSOL™ RM-7 | Univar Solutions | ACRYSOL™ RM-7 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product offers a much more Newtonian rheology profile than cellulosic thickeners, enabling lower vis...view more ACRYSOL™ RM-7 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product offers a much more Newtonian rheology profile than cellulosic thickeners, enabling lower viscosity in low-shear conditions and higher viscosity in high-shear conditions. It is supplied as a high solids, low viscosity liquid for ease of use in manufacturing. view less | Request Sample |
| ACRYSOL™ RM-725 | Univar Solutions | ACRYSOL™ RM-725 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. It builds mid-shear (KU) viscosity while also contrib...view more ACRYSOL™ RM-725 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. It builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener usage. It offers formulators an excellent balance of sag resistance and leveling, especially in paints utilizing vinyl acrylic binder technology. view less | Request Sample |
| ACRYSOL™ RM-8 | Univar Solutions | ACRYSOL™ RM-8 is a nonionic, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, which doesn't require pH adjustment for textile formulations. | Request Sample |
| ACRYSOL™ RM-825 | Univar Solutions | ACRYSOL™ RM-825 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This designed for formulating interior/exterior water-based latex coatings ranging from highly structured coatings to coatings that portray nearly-...view more ACRYSOL™ RM-825 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This designed for formulating interior/exterior water-based latex coatings ranging from highly structured coatings to coatings that portray nearly-Newtonian behavior. It is delivered at 25% solids with butyl carbitol as its cosolvent. view less | Request Sample |
| ACRYSOL™ RM-845 | Univar Solutions | ACRYSOL™ RM-845 is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. This offers excellent flow and leveling, as well as glo...view more ACRYSOL™ RM-845 is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. This offers excellent flow and leveling, as well as gloss development, for both interior and exterior paints. It imparts a rheological profile to architectural and industrial coatings very similar to that of ACRYSOL™ RM-825 Rheology Modifier, but with the benefit of no added solvent, allowing for ultra-low VOC formulations. view less | Request Sample |
| ACRYSOL™ RM-895 | Univar Solutions | ACRYSOL™ RM-895 is a solvent-free, nonionic, hydrophobically modified ethylene oxide uretane (HEUR) associative thickener providing enhanced viscosity stability to colorant addition when compared to existing HEUR thickeners. This KU-building associative t...view more ACRYSOL™ RM-895 is a solvent-free, nonionic, hydrophobically modified ethylene oxide uretane (HEUR) associative thickener providing enhanced viscosity stability to colorant addition when compared to existing HEUR thickeners. This KU-building associative thickener offers formulators an excellent balance of sag resistance in tinted paints, flow and leveling, and gloss development for interior and exterior paints. view less | Request Sample |
| ACRYSOL™ RM-8W | Univar Solutions | ACRYSOL™ RM-8W is a nonionic urethane rheology modifier, designed to formulate high performance, environmentally friendly, low VOC solvent-free interior/exterior paints. It has a pseudoplastic rheology profile, similar to the ones of ACRYSOL™ RM-8 and ACR...view more ACRYSOL™ RM-8W is a nonionic urethane rheology modifier, designed to formulate high performance, environmentally friendly, low VOC solvent-free interior/exterior paints. It has a pseudoplastic rheology profile, similar to the ones of ACRYSOL™ RM-8 and ACRYSOL™ RM-825 but is delivered free of solvents. It allows the formulation of paints with an excellent balance between flow and sag and can be used as a cothickener in many types of formulations for attaining a desired balance of low and high shear viscosities. It has excellent compatibility at all blend ratios with the more Newtonian, solvent-free rheology modifier ACRYSOL™ RM-2020. The combination of the two, gives a wider formulation latitude to the paint formulator than previously attainable for solvent-free systems. ACRYSOL™ RM-8W is delivered as a low viscosity liquid and is therefore very easy to incorporate and should improve the paint manufacturing process. view less | Request Sample |
| ACRYSOL™ RM-995 | Univar Solutions | ACRYSOL™ RM-995 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ technology. This product is a mid-shear (KU) viscosity rheology modifier offers improved performance...view more ACRYSOL™ RM-995 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ technology. This product is a mid-shear (KU) viscosity rheology modifier offers improved performance in viscosity stability upon tinting and excellent sag resistance.while maintaining the properties that HEUR technology is known for, e.g. excellent flow, gloss development and applicability both interior and exterior latex coatings. It is provided as a low-viscosity material for ease of use in the manufacturing process. view less | Request Sample |
| ACRYSOL™ SCT-275 | Univar Solutions | ACRYSOL™ SCT-275 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener...view more ACRYSOL™ SCT-275 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener usage. It offers formulators an excellent balance of sag resistance and leveling, especially in paints utilizing vinyl acrylic binder technology. view less | Request Sample |
| ACRYSOL™ TT-615 | Univar Solutions | ACRYSOL™ TT-615 is an APEO-free, solvent-free, hydrophobically modified, alkali-soluble emulsion (HASE) thickener for latex coatings. Thisexhibits low-shear (Brookfield) viscosity build comparable to high molecular weight HEC thickeners, leading to a high...view more ACRYSOL™ TT-615 is an APEO-free, solvent-free, hydrophobically modified, alkali-soluble emulsion (HASE) thickener for latex coatings. Thisexhibits low-shear (Brookfield) viscosity build comparable to high molecular weight HEC thickeners, leading to a highly shear-thinning rheology profile that can helps build sag resistance and help reduce pigment settling in latex coatings. It is supplied as a low viscosity liquid that is easy to handle and incorporate during the manufacturing process. view less | Request Sample |
| ACRYSOL™ TT-935 | Univar Solutions | ACRYSOL™ TT-935 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product can be used to build viscosity in the low, medium, and high-shear range as an alternative ...view more ACRYSOL™ TT-935 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product can be used to build viscosity in the low, medium, and high-shear range as an alternative to cellulosic thickeners, offering better film build, better leveling, and easier incorporation into coatings than cellulosic thickeners. It is supplied as a low viscosity liquid that is easy to handle and incorporate during the manufacturing process. view less | Request Sample |
| AEPD VOX 1000 | Univar Solutions | AEPD® VOX 1000 neutralizing amino alcohol is a multifunctional additive for low-odor, low-VOC interior water-based paints. The multifunctional nature allows significant reduction in primary dispersant, defoamer, glycols and coalescing agents. . | Request Sample |
| AEROSOL® 22 Surfactant | Univar Solutions | AEROSOL® 22 Surfactant is a surfactant combining high hydrophilic and hydrophobic moieties with excellent acid and alkali compatibility. Emulsifier, dispersant, and hydrotrope solubilizer. Primary and secondary emulsifier in emulsion polymerization. | Request Sample |
| AEROSOL® IB-45 Surfactant | Univar Solutions | AEROSOL® IB-45 Surfactant is a very hydrophilic surface active agent that exhibits excellent compatibility with electrolytes. It is an extremely efficient wetting agent in high concentrations of electrolytes. | Request Sample |
| AEROSOL® MA-80 I Surfactant | Univar Solutions | AEROSOL® MA-80 I Surfactant is a surface tension depressant and an emulsifying, dispersing, and solubilizing agent exhibiting high electrolyte tolerance. It promotes penetration and spreading of organic liquids as films which break up into minute droplets...view more AEROSOL® MA-80 I Surfactant is a surface tension depressant and an emulsifying, dispersing, and solubilizing agent exhibiting high electrolyte tolerance. It promotes penetration and spreading of organic liquids as films which break up into minute droplets. view less | Request Sample |
| AEROSOL® OT-70 PG Surfactant | Univar Solutions | AEROSOL® OT-70 PG Surfactant is a surfactant with high flash point. It is an excellent wetting, re-wetting, and levelling agent. | Request Sample |
| AEROSOL® OT-75 Surfactant | Univar Solutions | AEROSOL® OT-75 Surfactant is a surfactant with excellent wetting, re-wetting, and levelling agent. | Request Sample |
| AEROSOL® OT-B Surfactant | Univar Solutions | AEROSOL® OT-B Surfactant is widely used in the preparation of readily wettable and dispersible agricultural free-flowing powder and water-soluble granule formulations. | Request Sample |
| ALKATERGE T | Univar Solutions | ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible wit...view more ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE-T is miscible with almost all organic liquids. ALKATERGE-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less | Request Sample |
| AMP REGULAR | Univar Solutions | AMP REGULAR is a very efficient co-dispersant for pigments, and contributes pH stability, low odor, and anticorrosive properties; furthermore, it promotes acceptance of colorants. | Request Sample |
| AMP-95 | Univar Solutions | AMP-95 is a multifunctional specialty additive with a relatively low viscosity provides numerous benefits including co-dispersing, neutralization, low odor, formaldehyde scavenging and meets various FDA approvals for indirect food contact. | Request Sample |
| CAB-O-SIL® EH-5F | Univar Solutions | CAB-O-SIL® EH-5F is a high-purity material that can act as carrier, flavor masking, anti-settling, thickening, anti-caking, and fat substitution additives in food applications. | Request Sample |
| CAB-O-SIL® EH5 | Univar Solutions | CAB-O-SIL® EH5 is a very high surface fumed silica which can increase the viscosity of liquid systems and provide significant reinforcement of silicone and organic rubbers. | Request Sample |
| CAB-O-SIL® H5 | Univar Solutions | CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), ...view more CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), and anti-settling behavior in liquid systems. High shear dispersion equipment is required to realize the full benefits of H-5 fumed silica. For clear coatings and other systems, well-dispersed CAB-O-SIL® H5 fumed silica allows for good transparency. view less | Request Sample |
| CAB-O-SIL® L90 | Univar Solutions | CAB-O-SIL® L90 is a low surface area fumed silica. It is untreated and provides rheology control and reinforcement for silicone sealants and elastomer applications. It is the most easily dispersed of Cabot’s untreated fumed silicas. | Request Sample |
| CAB-O-SIL® LM150 | Univar Solutions | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...view more CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. view less | Request Sample |
| CAB-O-SIL® M-5 | Univar Solutions | CAB-O-SIL® M-5 is a medium surface fumed silica which enables a significant increase in viscosity in liquid systems, free flow of powders and reinforcement of silicone and organic rubbers. | Request Sample |
| CAB-O-SIL® M-5F | Univar Solutions | CAB-O-SIL® M-5F is a high-purity material that can act as a carrier and a flavor masking, anti-settling, thickening, anti-caking, and fat substitution additive in food applications. | Request Sample |
| CAB-O-SIL® M7D | Univar Solutions | CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone r...view more CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL M-7D fumed silica, further modification of its surface is necessary to prevent crepe hardening. view less | Request Sample |
| CAB-O-SIL® MS75D | Univar Solutions | CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silic...view more CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL MS-75D fumed silica, further modification of its surface is necessary to prevent crepe hardening. view less | Request Sample |
| CAB-O-SIL® PTG | Univar Solutions | CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. ...view more CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. This thixotropic behavior enables good penetration of the resin into the matrix during application and prevents dripping. view less | Request Sample |
| CAB-O-SIL® TS-382 | Univar Solutions | CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performa...view more CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance than untreated silica. view less | Request Sample |
| CAB-O-SIL® TS5022 | Univar Solutions | CAB-O-SIL® TS5022 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| CAB-O-SIL® TS530 | Univar Solutions | CAB-O-SIL® TS530 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls in the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| CELLOSIZE™ EP-09 | Univar Solutions | CELLOSIZE™ EP-09 is a hydroxyethyl cellulose used in paints, graphic arts, and adhesives. | Request Sample |
| CELLOSIZE™ QP 100MH | Univar Solutions | CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thi...view more CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thicken household cleaning products, in the fabrication of toilet tank drop-in tablets, and other applications where very high thickening efficiency is the dominant performance requirement. view less | Request Sample |
| CELLOSIZE™ QP 15000H | Univar Solutions | CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ Q...view more CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 15000H HEC are 4 to 6 pounds per 100 gallons, and in personal care/household cleaners, the levels of CELLOSIZE™ QP 15000H HEC are typically between 0.5% and 1%. view less | Request Sample |
| CELLOSIZE™ QP 300 | Univar Solutions | CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical us...view more CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical use level of CELLOSIZE QP 300 HEC in latex synthesis is 2% by weight (based on total monomers) in vinyl and vinyl-acrylic latex formulations (usually less in all-acrylic formulations). view less | Request Sample |
| CELLOSIZE™ QP 30000H | Univar Solutions | CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE...view more CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 30000H HEC are 4 to 6 pounds per 100 gallons, and in personal care and household cleaners, the levels of CELLOSIZE™ QP 30000H HEC are typically between 0.5% and 1%. view less | Request Sample |
| CELLOSIZE™ QP 4400H | Univar Solutions | CELLOSIZE™ QP 4400H is a medium molecular weight cellulosic polymer useful for general thickening applications, and is used primarily as a latex paint thickener. Its excellent rheological properties give paints good flow and leveling characteristics. | Request Sample |
| CELLOSIZE™ QP 52000H | Univar Solutions | CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-join...view more CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-joint compounds. view less | Request Sample |
| CELLOSIZE™ QP-100MH-V | Univar Solutions | CELLOSIZE™ QP-100MH-V is a very high molecular weight hydroxyethyl cellulose. The product is surface treated to avoid gel or lump formation when dissolved in aqueous systems. | Request Sample |
| CHEMREZ 30 | Univar Solutions | CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and...view more CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin solution to dry pigment. CHEMREZ 30 has been used with a wide range of organic pigments as well as carbon black. CHEMREZ 30 as a letdown vehicle can be used upwards of 50% of the formulation. view less | Request Sample |
| DDSA | Univar Solutions | DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fu...view more DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fuels and lubricating oils. view less | Request Sample |
| Decoupage MNP | Univar Solutions | Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage co...view more Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage coating. Decoupage MNP can also be used in other nonylphenol applications where color stability is of prime importance. view less | Request Sample |
| DMAMP-80 | Univar Solutions | DMAMP-80 is one of the strongest tertiary amino alcohols commercially available, which can be used in water based systems to provide exceptional clarity, wettability and stability. | Request Sample |
| Dow Corning® 1250 Surfactant | Univar Solutions | Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthe...view more Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthetic leathers. view less | Request Sample |
| Dow Corning® 26 Additive | Univar Solutions | Dow Corning® 26 Additive is a leveling and wetting agent for solvent-based coatings and inks. It is a low-viscosity, 100% silicone fluid containing no solvents. | Request Sample |
| Dow Corning® 550 Fluid | Univar Solutions | Dow Corning® 550 Fluid is a trimethyl-terminated dimethyl, phenylmethyl siloxane fluid. It offers excellent heat transfer characteristics, good compressibility, and good oxidation and thermal stability. | Request Sample |
| DOWSIL™ 100F Additive | Univar Solutions | DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and...view more DOWSIL™ 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. view less | Request Sample |
| DOWSIL™ 11 Additive | Univar Solutions | DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less | Request Sample |
| DOWSIL™ 163 Additive | Univar Solutions | DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active sil...view more DOWSIL™ 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. view less | Request Sample |
| DOWSIL™ 205SL Additive | Univar Solutions | DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving ben...view more DOWSIL™ 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. view less | Request Sample |
| DOWSIL™ 29 Additive | Univar Solutions | DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin ...view more DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. view less | Request Sample |
| DOWSIL™ 3 Additive | Univar Solutions | DOWSIL™ 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | Request Sample |
| DOWSIL™ 401LS Additive | Univar Solutions | DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formul...view more DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | Request Sample |
| DOWSIL™ 402LS Additive | Univar Solutions | DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coa...view more DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less | Request Sample |
| DOWSIL™ 500W Additive | Univar Solutions | DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | Request Sample |
| DOWSIL™ 501W Additive | Univar Solutions | DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | Request Sample |
| DOWSIL™ 502W Additive | Univar Solutions | DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | Request Sample |
| DOWSIL™ 56 Additive | Univar Solutions | DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less | Request Sample |
| DOWSIL™ 57 Additive | Univar Solutions | DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less | Request Sample |
| DOWSIL™ 67 Additive | Univar Solutions | DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective ...view more DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | Request Sample |
| DOWSIL™ 68 Additive | Univar Solutions | DOWSIL™ 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | Request Sample |
| DOWSIL™ 7 Additive | Univar Solutions | DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less | Request Sample |
| DOWSIL™ 71 Additive | Univar Solutions | DOWSIL™ 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. | Request Sample |
| DOWSIL™ 74 Additive | Univar Solutions | DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stabil...view more DOWSIL™ 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. view less | Request Sample |
| DOWSIL™ 8590 Additive | Univar Solutions | DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion p...view more DOWSIL™ 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. view less | Request Sample |
| Eastman Optifilm™ Enhancer 400 | Univar Solutions | Eastman Optifilm™ enhancer 400 is a very low VOC, low odor coalescent that is compatible with a variety of latex types. It is an efficient coalescent that aids in the development of latex paints that have a good balance of performance properties. Eastman ...view more Eastman Optifilm™ enhancer 400 is a very low VOC, low odor coalescent that is compatible with a variety of latex types. It is an efficient coalescent that aids in the development of latex paints that have a good balance of performance properties. Eastman Optifilm™ enhancer 400 delivers excellent film integrity, touch-up properties, and scrub resistance, even at the lowest VOCs content. Paints prepared with Eastman Optifilm™ enhancer 400 have also demonstrated good exterior durability after one year exposure. view less | Request Sample |
| Eastman Texanol™ Ester Alcohol | Univar Solutions | Eastman Texanol™ Ester Alcohol is the premier coalescent for latex paints. It performs well in all types of latex paints, in a variety of weather conditions, and over substrates with different levels of porosity. It provides the highest level of film inte...view more Eastman Texanol™ Ester Alcohol is the premier coalescent for latex paints. It performs well in all types of latex paints, in a variety of weather conditions, and over substrates with different levels of porosity. It provides the highest level of film integrity at low levels of coalescent, enhancing the performance properties of the paint including low temperature coalescence, touch-up, scrub resistance, washability, color development, thermal flexibility, and resistance to mudcracking. Eastman Texanol™ ester alcohol also enhances thickening efficiency when used with associative thickeners. view less | Request Sample |
| ECA 29 Epoxy Curing Agent | Univar Solutions | ECA 29 Epoxy Curing Agent is a mixture of aliphatic polyamines derived from ethylenediamine, useful as an epoxy curing agent in applications where higher glass transition temperature and reasonably fast reactivity are needed with longer pot life. | Request Sample |
| Genapol® PF 40 | Univar Solutions | Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...view more Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. view less | Request Sample |
| Genapol® PF 80 Powder | Univar Solutions | Genapol® PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 80 powder is resistant to water hardness salts and to ac...view more Genapol® PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 80 powder is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This product has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 80 powder is used as a low-foaming surfactant with very good dispersing action in detergent and cleaning agent powders. These can be produced simply by mixing the powder components. Genapol® PF 80 powder is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. view less | Request Sample |
| Genapol® X 100 | Univar Solutions | Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. ...view more Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. This product is also available as Genapol® X 100 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 61.7%. view less | Request Sample |
| GEROPON® 99 | Univar Solutions | GEROPON® 99 is a highly efficient, low VOC, anionic surfactant. It’s high flash point and low odor make this product easy to handle. GEROPON® 99 improves flow and leveling of semi and gloss paints while reducing or eliminating crawling and cut-through ove...view more GEROPON® 99 is a highly efficient, low VOC, anionic surfactant. It’s high flash point and low odor make this product easy to handle. GEROPON® 99 improves flow and leveling of semi and gloss paints while reducing or eliminating crawling and cut-through over greasy and glossy surfaces. It can also be used as a re-wetting agent in board or adhesives for quick strike. view less | Request Sample |
| Hostaphat® 1322 | Univar Solutions | Hostaphat® 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rol...view more Hostaphat® 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rolling oils. view less | Request Sample |
| LAPONITE® RD | Univar Solutions | LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...view more LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. view less | Request Sample |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...view more LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. view less | Request Sample |
| LUDOX® CL | Univar Solutions | LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that impa...view more LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that imparts a positive charge. LUDOX® CL Colloidal Silica may be used in various coating applications in which the formulation requires acidic pH or cationic polymers or surfactants. The positively charged particles may be used as surface treatments to paper and fibrous materials. LUDOX® CL Colloidal Silica can also be used as a high temperature binder. view less | Request Sample |
