ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete.
ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...view more
ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. view less
BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS.
BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness.
BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS.
EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...view more
EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. view less
HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...view more
HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. view less
IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...view more
IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. view less
IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...view more
IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. view less
IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...view more
IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. view less
VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...view more
VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. view less
VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....view more
VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. view less
VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...view more
VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. view less
VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...view more
VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. view less
VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...view more
VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. view less
VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings.
VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings.
VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...view more
VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. view less
Upgrade to a premium Prospector account to filter by ingredient properties and view compliance highlights. These features can help you make smarter formulation decisions with instant access to:
Search by physical and chemical properties. Personal Care & Cosmetics only.
We're sorry, but the industry you have selected is not currently available in your chosen language. You may choose a language below to continue to this industry or close this dialog above.
