| GENOMER* 4247 | Rahn USA Corp. | GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low...view more GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low viscosity, and medium-high reactivity. This product provides films with exceptional hardness and good mechanical properties. It is recommended for clear and pigmented coatings. view less | Request Sample |
| GENOMER* 4691 | Rahn USA Corp. | GENOMER* 4691 is an aliphatic urethane hexaacrylate. GENOMER* 4691 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. | Request Sample |
| EBECRYL® 893 | Allnex | EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. The low viscosity of EBECRYL® 893 also provides latitude to achieve low viscosity formulations, whi...view more EBECRYL® 893 is a modified polyester acrylate specifically developed for UV curable field applied concrete and vinyl composition tile (VCT) floor coatings. The low viscosity of EBECRYL® 893 also provides latitude to achieve low viscosity formulations, which are required for field applied applications. It is recommended for use in UV curable field applied concrete and VCT coatings. view less | Request Sample |
| Rovene® 6101 | Mallard Creek Polymers, Inc. | Rovene® 6101 is a non-film forming, high gloss extending vehicle for flexographic and gravure inks and overprint varnishes. It is intended primarily for use on paper and paperboard substrates. | |
| Rovene® 6102 | Mallard Creek Polymers, Inc. | Rovene® 6102 is a hard, film forming vehicle for flexographic and gravure inks and overprint varnishes. It allows formulating latitude to increase film integrity and flexibility in overprint varnishes and inks, particularly when blended with higher Tg pol...view more Rovene® 6102 is a hard, film forming vehicle for flexographic and gravure inks and overprint varnishes. It allows formulating latitude to increase film integrity and flexibility in overprint varnishes and inks, particularly when blended with higher Tg polymers, without negatively affecting the block resistance of the inks and overprint varnishes. view less | |
| Rovene® 6103 | Mallard Creek Polymers, Inc. | Rovene® 6103 is a soft, film forming vehicle for flexographic and gravure inks and overprint varnishes. It can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing excell...view more Rovene® 6103 is a soft, film forming vehicle for flexographic and gravure inks and overprint varnishes. It can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing excellent gloss. view less | |
| Rovene® 6104 | Mallard Creek Polymers, Inc. | Rovene® 6104 is a very soft, film forming vehicle for flexographic and gravure inks and overprint varnishes. It can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing g...view more Rovene® 6104 is a very soft, film forming vehicle for flexographic and gravure inks and overprint varnishes. It can be used as the film forming component in overprint varnish formulations or as the sole vehicle for inks and overprint varnishes providing good gloss. view less | |
| Rovene® 6111 | Mallard Creek Polymers, Inc. | Rovene® 6111 is a low glycol ether and VOC; non-film forming and high gloss resin supported emulsion for general purpose flexographic and gravure inks and overprint varnishes. It can be used as a letdown vehicle for paper and paperboard substrates that ex...view more Rovene® 6111 is a low glycol ether and VOC; non-film forming and high gloss resin supported emulsion for general purpose flexographic and gravure inks and overprint varnishes. It can be used as a letdown vehicle for paper and paperboard substrates that exhibit excellent hold out and high gloss. view less | |
| Rovene® 6112 | Mallard Creek Polymers, Inc. | Rovene® 6112 is a low glycol ether and VOC; hard, film forming resin supported emulsion for flexographic and gravure inks and overprint varnishes. It allows formulating for film integrity and flexibility without adversely affecting the blocking resistance...view more Rovene® 6112 is a low glycol ether and VOC; hard, film forming resin supported emulsion for flexographic and gravure inks and overprint varnishes. It allows formulating for film integrity and flexibility without adversely affecting the blocking resistance of the inks and overprint varnishes. view less | |
| Rovene® 6115 | Mallard Creek Polymers, Inc. | Rovene® 6115 is a low odor, hard, non-film forming resin supported emulsion that is sodium hydroxide neutralized with excellent press runnability. It is primarily used on paper and paperboard substrates. | |
| Rovene® 6107 | Mallard Creek Polymers, Inc. | Rovene® 6107 resin supported emulsion is a very hard but film forming vehicle used in inks and overprint varnishes for paper and paperboard. Inks formulated with this emulsion exhibit excellent ink transfer as well as excellent printability. Rovene® 6107 ...view more Rovene® 6107 resin supported emulsion is a very hard but film forming vehicle used in inks and overprint varnishes for paper and paperboard. Inks formulated with this emulsion exhibit excellent ink transfer as well as excellent printability. Rovene® 6107 exhibits outstanding gloss and non-blocking properties. On paper and paperboard it has good hold-out and excellent flow and leveling. view less | |
| JONCRYL® 62 | BASF Dispersions & Resins | JONCRYL 62 is a solution of JONCRYL 67, a high molecular weight dispersion resin for pigment dispersions and printing ink applications. | |
| Rovene® 6106 | Mallard Creek Polymers, Inc. | Rovene® 6106 is a high solids, non-film forming, resin supported emulsion that imparts ultra-fast drying to flexographic and gravure inks for paper and paperboard. The combination of the polymer design and high solids give inks formulated with Rovene® 610...view more Rovene® 6106 is a high solids, non-film forming, resin supported emulsion that imparts ultra-fast drying to flexographic and gravure inks for paper and paperboard. The combination of the polymer design and high solids give inks formulated with Rovene® 6106 very fast drying and excellent printability. The high solids, low viscosity, and fast drying characteristics are well suited for high speed gravure printing as well as flexographic printing. view less | |
| Epoxy Acrylate SE 1636 | Soltech Ltd | Epoxy Acrylate SE 1636 is a high functionality novolac epoxy acrylate oligomer with 50% TMPTA that designed to provide heat resistance, chemical resistance, fast curing, adhesion, and hardness. This product is commonly used in marking inks. Epoxy Acrylate...view more Epoxy Acrylate SE 1636 is a high functionality novolac epoxy acrylate oligomer with 50% TMPTA that designed to provide heat resistance, chemical resistance, fast curing, adhesion, and hardness. This product is commonly used in marking inks. Epoxy Acrylate SE 1636 is 50% polymer solid by weight with a viscosity of 35,000-55,000 at 25℃. view less | |
| GENOMER* 3414 | Rahn USA Corp. | GENOMER* 3414 is a modified polyether acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; ...view more GENOMER* 3414 is a modified polyether acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; and printing inks and varnishes for plastic foils. view less | Request Sample |
| EBECRYL® 4859 | Allnex | EBECRYL® 4859 is a difunctional aliphatic urethane methacrylate that does not contain any intentionally added organic tin compounds, heavy metals, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Due to a low intrinsic viscosity, EBECRYL® 4859 of...view more EBECRYL® 4859 is a difunctional aliphatic urethane methacrylate that does not contain any intentionally added organic tin compounds, heavy metals, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). Due to a low intrinsic viscosity, EBECRYL® 4859 offers ease of formulating in energy curable systems that are low in viscosity with high oligomer content. Films of EBECRYL® 4859 cured by ultraviolet light (UV) or electron beam (EB) exhibit good hardness, optically clarity, low color and good impact resistance. view less | Request Sample |
| Aromatic Urethane Hexaacrylate SM6329 | Jiangsu Sanmu Group Corporation | SM6329 is an aromatic urethane hexaacrylate. It offers high reactivity and hardness, and provides abrasion and chemical resistance. SM6329 is widely used in UV coatings, adhesives and inks. | |
| EBECRYL® 249 | Allnex | EBECRYL® 249 is an aliphatic urethane methacrylate diluted with 25% trimethylolpropane trimethacrylate (TMPTMA). Films of EBECRYL® 249 cured by electron beam (EB) or ultraviolet light (UV) exhibit good exterior durability, good adhesion and a high order o...view more EBECRYL® 249 is an aliphatic urethane methacrylate diluted with 25% trimethylolpropane trimethacrylate (TMPTMA). Films of EBECRYL® 249 cured by electron beam (EB) or ultraviolet light (UV) exhibit good exterior durability, good adhesion and a high order of scuff and abrasion. view less | Request Sample |
| LAROMER® PO 43 F | BASF Dispersions & Resins | LAROMER PO 43 is a polyether-modified acrylate oligomer. shows a very balanced property profile and can be used as a sole binder in energy curable formulations for a variety of applications. It is recommended for use in energy curable flexo, screen, and o...view more LAROMER PO 43 is a polyether-modified acrylate oligomer. shows a very balanced property profile and can be used as a sole binder in energy curable formulations for a variety of applications. It is recommended for use in energy curable flexo, screen, and offset inks, and overprint varnishes. In addition to chemical resistance, cured inks and overprint varnishes provide good surface hardness in combination with IRGACURE® 819, Lucirin® TPO, Lucirin® TPO-L, and Benzophenone. view less | |
| EBECRYL® 4683 | Allnex | EBECRYL® 4683 is an aliphatic urethane acrylate diluted 35% by weight with isobornyl acrylate (IBOA)(1) used in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4683 exhibits good reactivity and produces h...view more EBECRYL® 4683 is an aliphatic urethane acrylate diluted 35% by weight with isobornyl acrylate (IBOA)(1) used in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4683 exhibits good reactivity and produces hard, tough coatings particularly suited for protective coating on metal. view less | Request Sample |
| GENOMER* 3486 | Rahn USA Corp. | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and...view more GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. view less | Request Sample |
| GENOMER* 2252/TP40 | Rahn USA Corp. | GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...view more GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. view less | Request Sample |
| GENOMER* 2252/TP20 | Rahn USA Corp. | GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...view more GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. view less | Request Sample |
| GENOMER* 2252/TM20 | Rahn USA Corp. | GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...view more GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. view less | Request Sample |
| GENOMER* 2252/TP30 | Rahn USA Corp. | GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...view more GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. view less | Request Sample |
| EBECRYL® 88 | Allnex | EBECRYL® 88 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 88 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. ...view more EBECRYL® 88 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 88 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. EBECRYL® 88 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks. view less | Request Sample |
| CN9070 | Sartomer Americas | CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg...view more CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg, low crosslink density, and will be flexible. view less | |
| EBECRYL® LED 03 | Allnex | EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA,...view more EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co‐resin to UV curable formulations. EBECRYL® LED 03 – when combined with an appropriate photoinitiator system – transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photoinitiators. view less | Request Sample |
| GENOMER* 4297 | Rahn USA Corp. | GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...view more GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. view less | Request Sample |
| EBECRYL® 7110 | Allnex | EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110 provides rap...view more EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, this product reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. It also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings. view less | Request Sample |
| EBECRYL® 4397 | Allnex | EBECRYL® 4397 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal. | Request Sample |
| UCECOAT® 2806 | Allnex | UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean particle size associated with an excellent colloidal stability alone and in the presence of pigments. Its polymer composition was optimized for high reactivity as well as low migration potential. It contains essentially oligomers and polymers having a molecular weight above 500 Daltons with acrylic...view more UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean particle size associated with an excellent colloidal stability alone and in the presence of pigments. Its polymer composition was optimized for high reactivity as well as low migration potential. It contains essentially oligomers and polymers having a molecular weight above 500 Daltons with acrylic double bound functionality equal to or greater than 6. It is easily water redispersible and tacky after water evaporation but before cure. view less | Request Sample |
| EBECRYL® 160 | Allnex | EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and tou...view more EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, EBECRYL® 160 exhibits the highest reactivity and the greatest viscosity reduction of oligomers. EBECRYL® 160 is a reactive diluent compatible with a wide range of acrylated resins used in UV/EB curing applications. Hardness, abrasion resistance, and high gloss properties make EBECRYL®160 popular for overprint varnishes, inks, coatings and electronic applications such as photoresists. view less | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...view more Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. view less | |
| EBECRYL® 875 | Allnex | EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, p...view more EBECRYL® 875 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 875 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates. EBECRYL® 875 also exhibits low odor. view less | Request Sample |
| ACTFLOW 1-A | Kowa American Corporation | ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal t...view more ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less | Request Sample |
| ACTFLOW UT-1001 | Kowa American Corporation | ACTFLOW UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...view more ACTFLOW UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less | Request Sample |
| ACTFLOW CB-3060 | Kowa American Corporation | ACTFLOW CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excell...view more ACTFLOW CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less | Request Sample |
| ACTFLOW CB-3098 | Kowa American Corporation | ACTFLOW CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...view more ACTFLOW CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less | Request Sample |
| ACTFLOW CBB-3098 | Kowa American Corporation | ACTFLOW CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and e...view more ACTFLOW CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less | Request Sample |
| ACTFLOW NE-1000 | Kowa American Corporation | ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...view more ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less | Request Sample |
| ACTFLOW NE-3000 | Kowa American Corporation | ACTFLOW NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...view more ACTFLOW NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less | Request Sample |
| MACRYNAL® SM 6826w/43WA | Allnex | Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when ...view more Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when used in combination with water-emulsifiable polyisocyanates. view less | Request Sample |
| VIACRYL® SC 134/50WS165 | Allnex | Viacryl® SC 134/50WS165 is a thermoplastic, flexible methacrylate resin. It has very rapid physical drying and outstanding weather resistance. It also has excellent pigment wetting, alkali and water resistance. It's a sole binder for full tone masonry pai...view more Viacryl® SC 134/50WS165 is a thermoplastic, flexible methacrylate resin. It has very rapid physical drying and outstanding weather resistance. It also has excellent pigment wetting, alkali and water resistance. It's a sole binder for full tone masonry paints or resin modified plasters. view less | Request Sample |
| JONCRYL® HSL 9011 | BASF Dispersions & Resins | JONCRYL HSL 9011 is the latest resin innovation for functional packaging coatings specifically developed for the reduction of heat-seal activation temperature. JONCRYL HSL 9011 allows the formulation of heat-seal lacquers for carton board blisters for hig...view more JONCRYL HSL 9011 is the latest resin innovation for functional packaging coatings specifically developed for the reduction of heat-seal activation temperature. JONCRYL HSL 9011 allows the formulation of heat-seal lacquers for carton board blisters for high-speed packaging machines. Also, it can be used on cardboard blisters for sensitive applications, such as baby pacifiers and toothbrushes. view less | |
| VIACRYL® SC 6834w/42WA | Allnex | Viacryl SC 6834W/42WA is a solvent-free, hydroxy functional polyacrylate dispersion. When combined with Cymel NF 3030 waterborne formaldehyde free cross-linker, the system is well suited for wood cabinetry, furniture, kitchen cabinetry and other industria...view more Viacryl SC 6834W/42WA is a solvent-free, hydroxy functional polyacrylate dispersion. When combined with Cymel NF 3030 waterborne formaldehyde free cross-linker, the system is well suited for wood cabinetry, furniture, kitchen cabinetry and other industrial wood applications. view less | Request Sample |
| VIACRYL® SC 6844w/42WA | Allnex | Viacryl SC 6844W/42WA is a solvent-free, hydroxy functional polyacrylate dispersion. Like Viacryl SC 6834w/42WA, when combined with Cymel NF 3030 waterborne formaldehyde free cross-linker, the system is well suited for wood cabinetry, furniture, kitchen c...view more Viacryl SC 6844W/42WA is a solvent-free, hydroxy functional polyacrylate dispersion. Like Viacryl SC 6834w/42WA, when combined with Cymel NF 3030 waterborne formaldehyde free cross-linker, the system is well suited for wood cabinetry, furniture, kitchen cabinetry and other industrial wood applications. SC 6844 allows for greater formulating latitude relative to SC 6834 when used with CYMEL® NF 3030. view less | Request Sample |
| SETATHANE® E 2000 | Allnex | SETATHANE® E 2000 is a polyol emulsion used for industrial grade floor coatings. When properly formulated, SETATHANE® E 2000 produces a floor system that is hard and durable, resistant to impact, abrasion, thermal shock and chemicals/ food acids, yet is n...view more SETATHANE® E 2000 is a polyol emulsion used for industrial grade floor coatings. When properly formulated, SETATHANE® E 2000 produces a floor system that is hard and durable, resistant to impact, abrasion, thermal shock and chemicals/ food acids, yet is non-porous, hygienic and easily cleaned. view less | Request Sample |
| SETATHANE® E 2017 | Allnex | SETATHANE® E 2017 is suitable for formulation of cementitious 3K-PUR-screed for the food and beverage industries. Mortars formulated with SETATHANE® E 2017 and diphenylmethane type diisocyanates generally exhibit very good thermal-shock resistance and res...view more SETATHANE® E 2017 is suitable for formulation of cementitious 3K-PUR-screed for the food and beverage industries. Mortars formulated with SETATHANE® E 2017 and diphenylmethane type diisocyanates generally exhibit very good thermal-shock resistance and resistance to organic and inorganic acids, and solvents. Overcrosslinking of 400% or more is typical. No additional water or solvent should ever be added to this. view less | Request Sample |
| Soluryl RV-4965 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl RV-4965 is a modified acryl-styrene copolymer for use in water-based calender overprint vanish. It is compatible with a wide range of other acrylics. | |
| EBECRYL® 4666 | Allnex | EBECRYL® 4666 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4666 exhibit high reactivity and result in hard coatings. EBECRYL® 4666 is used in the formula...view more EBECRYL® 4666 is a weather-stable aliphatic urethane acrylate having a relatively low viscosity due to the allophanate structure. Formulations based on EBECRYL® 4666 exhibit high reactivity and result in hard coatings. EBECRYL® 4666 is used in the formulation of UV/EB energy curable coatings for wood and plastic substrates via the roller coating, spray or curtain coating processes. view less | Request Sample |
| POLYESTER ACRYLATE 03-849 | Rahn USA Corp. | POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in print...view more POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in printing inks and varnishes, overprint varnishes, plastic coatings and wood and industrial coatings. view less | Request Sample |
| GENOMER* 2312 | Rahn USA Corp. | GENOMER* 2312 (epoxidized soy oil acrylate or ESOA) is an epoxy acrylate oligomer with utility in UV and EB free radical inks, coatings and adhesives. It offers moderate functionality and viscosity, excellent flexibility and good adhesion in a variety of ...view more GENOMER* 2312 (epoxidized soy oil acrylate or ESOA) is an epoxy acrylate oligomer with utility in UV and EB free radical inks, coatings and adhesives. It offers moderate functionality and viscosity, excellent flexibility and good adhesion in a variety of applications, all with the benefit of low skin irritancy. This product is useful in dispersions where excellent pigment wetting contributes to inks with high gloss, color hold out and substrate adhesion. Likewise, in coatings for paper, metal and wood, GENOMER* 2312 contributes to excellent toughness, flexibility, crease and scuff resistance. view less | Request Sample |
| GENOMER* 3457 | Rahn USA Corp. | GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and var...view more GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and varnishes, industrial coatings and adhesives, and additive manufacturing applications. view less | Request Sample |
| EBECRYL® 4690 | Allnex | EBECRYL® 4690 is an energy-curable, Tin-free, urethane acrylate with ~27% bio-carbon offering and an excellent outdoor durability for clear and pigmented coats. This solvent-free product presents a high reactivity for an effective productivity and brings ...view more EBECRYL® 4690 is an energy-curable, Tin-free, urethane acrylate with ~27% bio-carbon offering and an excellent outdoor durability for clear and pigmented coats. This solvent-free product presents a high reactivity for an effective productivity and brings high hardness after cure with excellent substrate protection. view less | Request Sample |
| Aliphatic Urethane Acrylate SU 530 | Soltech Ltd | Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment...view more Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 530 is 100% polymer solid by weight with a mPs.s viscosity of 35,000-55,000 at 25℃. view less | |
| Aliphatic Urethane Acrylate SU 5347 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, gl...view more Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 5347 is 100% polymer solid by weight with a mPs.s viscosity of 600-1,200 at 25℃. view less | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...view more UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. view less | |
| GENOMER* 4188/EHA | Rahn USA Corp. | GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industr...view more GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. view less | Request Sample |
| Aliphatic Urethane Acrylate SU 520 | Soltech Ltd | Aliphatic Urethane Acrylate SU 520 is a deca-functional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion resistance, hardness, and a fast curing response. This product is commonly used in applications such as pla...view more Aliphatic Urethane Acrylate SU 520 is a deca-functional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion resistance, hardness, and a fast curing response. This product is commonly used in applications such as plastic coatings, inks, clear coatings, vinyl flooring, and hard film coatings. Aliphatic Urethane Acrylate SU 520 is 100% polymer solid by weight with an mPa.s viscosity of 2,500-3,500 at 60℃. view less | |
| GENOMER* 4188/M22 | Rahn USA Corp. | GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives a...view more GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. view less | Request Sample |
| Aliphatic Urethane Acrylate SU 5039 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5039 is a nona-functional aliphatic urethane acrylate oligomer that is designed to provide a fast curing response, abrasion resistance, stain resistance, hardness, and light color. Common applications of this product include...view more Aliphatic Urethane Acrylate SU 5039 is a nona-functional aliphatic urethane acrylate oligomer that is designed to provide a fast curing response, abrasion resistance, stain resistance, hardness, and light color. Common applications of this product include plastic coatings, hard coatings, clear coatings, vinyl flooring, and inks, . Aliphatic Urethane Acrylate SU 5039 is 85% polymer solid by weight with a mPa.s viscosity of 5,000-9,000 at 60℃. view less | |
| GENOMER* 3611 | Rahn USA Corp. | GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigme...view more GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigment wetting, high reactivity, good scratch and solvent resistance, high abrasion resistance, and very good lithographic behavior. This product is used in flexo inks and varnishes, as well as in offset inks and varnishes. view less | Request Sample |
| CN111US | Sartomer Americas | CN111US is a difunctional epoxidized soy bean oil acrylate oligomer that offers pigment wetting characteristics and produces flexible, well-adhering free-radically cured films. It has high impact strength and low shrinkage. Suggested applications include ...view more CN111US is a difunctional epoxidized soy bean oil acrylate oligomer that offers pigment wetting characteristics and produces flexible, well-adhering free-radically cured films. It has high impact strength and low shrinkage. Suggested applications include coatings, concrete and inks. view less | |
| Isobornyl Acrylate (IBXA) | Kowa American Corporation | Isobornyl Acrylate (IBXA) is a clear water white liquid. It has a 7.6 cps viscosity at 28°C. | Request Sample |
| VIACRYL® VSC 6273w/44WA | Allnex | Viacryl® VSC 6273W/44WA is an aqueous hydroxy functional copolymer emulsion with incorporated catalyst. It is used in combination with hexamethoxymethylmelamine (HMMM, e. g. Cymel 303 or Cymel 1130) stoving enamels with high gloss, good outdoor-durability...view more Viacryl® VSC 6273W/44WA is an aqueous hydroxy functional copolymer emulsion with incorporated catalyst. It is used in combination with hexamethoxymethylmelamine (HMMM, e. g. Cymel 303 or Cymel 1130) stoving enamels with high gloss, good outdoor-durability and little yellowing are achieved. view less | Request Sample |
| VIACRYL® VSC 6276w/44WA | Allnex | VIACRYL® VSC 6276W/44WA is an aqueous hydroxy functional copolymer emulsion that can be crosslinked with reactive melamine resin such as CYMEL® 325 or CYMEL® 327 to give less-yellowing industrial coating systems with good gloss. | Request Sample |
| UVECOAT® 2100 | Allnex | UVECOAT® 2100 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for application on metal substrates and can be used for clear as well as pigmented coatings. It provides good protection against ...view more UVECOAT® 2100 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for application on metal substrates and can be used for clear as well as pigmented coatings. It provides good protection against corrosion of pre-treated substrates. view less | Request Sample |
| UVECOAT® 3005 | Allnex | UVECOAT® 3005 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for applications on wood substrates, such as textured coatings on MDF and clear varnishes for natural hardwood. Coatings based on...view more UVECOAT® 3005 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. The resin has been developed for applications on wood substrates, such as textured coatings on MDF and clear varnishes for natural hardwood. Coatings based on UVECOAT® 3005 exhibit excellent scratch resistance. view less | Request Sample |
| UVECOAT® 2200 | Allnex | UVECOAT® 2200 is an amorphous unsaturated polyester resin for use in clear and pigmented UV curable powder coatings. Formulations based on UVECOAT® 2200 exhibit excellent corrosion and outdoor weathering resistance. | Request Sample |
| SYNTHACRYL® 710 | Allnex | SYNTHACRYL® 710 is a glycidyl functional polyacrylic resin designed as matting hardener for carboxyl functional polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2630-2 cured with SYNTHACRYL® 710 and Primid® XL 552 produce outsta...view more SYNTHACRYL® 710 is a glycidyl functional polyacrylic resin designed as matting hardener for carboxyl functional polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2630-2 cured with SYNTHACRYL® 710 and Primid® XL 552 produce outstandingly smooth, dead matte finishes. view less | Request Sample |
| TEGOMER® H-C 5002 | Evonik Operations GmbH, BL Coating Additives | TEGOMER® H-C 5002 is a low molecular hydroxy-functional polyacrylate. | Request Sample |
| ACURE™ 550-105 | Allnex | ACURE™ 550-105 is an ACURE certified ditrimethylolpropane tetraacrylate. | Request Sample |
| Texicryl® 13-503 | Scott Bader | Texicryl® 13-503 is designed for printing inks and non absorbent, low energy substrates, gives excellent wet rub performance. | |
| Texicryl® 13-824 | Scott Bader | Texicryl® 13-824 is a hard non film forming emulsion which can be coalesced to form a plasticiser and solvent resistant film. Excellent adhesion to vinyl and non-absorbent susbstrates. Suitable for inks PVC flooring and wallpaper. | |
| Texicryl® 13-828 | Scott Bader | Texicryl® 13-828 is a higly efficient alkali swellable emulsion designed for waterbased printing ink formulations. Flexographic inks for corrugated board. Suitable as a pigment grinding medium and let down vehicle. | |
| Texicryl® 4025 | Scott Bader | Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with s...view more Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with solvents and other resin systems. view less | |
| Aliphatic Urethane Acrylate SU 5270 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigmen...view more Aliphatic Urethane Acrylate SU 5270 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, adhesion, toughness, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, pigment coatings for wood, and screen inks. Aliphatic Urethane Acrylate SU 5270 is 100% polymer solid by weight with an mPa.s viscosity of 7,000-11,000 at 25℃. view less | |
| Aliphatic Urethane Acrylate SU 565 | Soltech Ltd | Aliphatic Urethane Acrylate SU 565 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion, fast curing, and light color. This product is commonly used in applications such as plastic coatings, light ...view more Aliphatic Urethane Acrylate SU 565 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion, fast curing, and light color. This product is commonly used in applications such as plastic coatings, light stable coatings, overprint varnishes, wood flooring and screen inks. Aliphatic Urethane Acrylate SU 565 is 75% polymer solid by weight with an m.PA.s viscosity of 30,000-40,000 at 25℃. view less | |
| Soluryl E-8040 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl E-8040 is a styrene-acryl emulsion for water-based products. It is recommended as a let down vehicle for corrugated paper. | |
| GENOMER* 7151 | Rahn USA Corp. | GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use...view more GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use in the following applications: printing inks for glass, metals and metalized substrates; protective coatings for metals; and wood coatings. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less | Request Sample |
| EBECRYL® 4491 | Allnex | EBECRYL® 4491 is an aliphatic urethane acrylate supplied in 20% isobornyl methacrylate (IBOMA). It is designed for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL 4491 are characterized by ...view more EBECRYL® 4491 is an aliphatic urethane acrylate supplied in 20% isobornyl methacrylate (IBOMA). It is designed for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL 4491 are characterized by very high flexibility and elongation at break. Cured films display rubber-elastic properties. view less | Request Sample |
| Epoxy Acrylate SE 148 | Soltech Ltd | Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings...view more Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 148 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. view less | |
| EBECRYL® 4220 | Allnex | EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application...view more EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA)(1). It produces tough coatings that resist yellowing. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. view less | Request Sample |
| EBECRYL® 4265 | Allnex | EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curabl...view more EBECRYL® 4265 is an aliphatic urethane acrylate without reactive diluent. It is characterized by its low viscosity and yields coatings with good chemical and mechanical properties. This product is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film. view less | Request Sample |
| Soluryl E-80T (APE Free) | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl E-80T (APE Free) is a styrene-acryl emulsion for water-based products. It is recommended as a let down vehicle for corrugated paper. | |
| Texicryl® 13-819 | Scott Bader | Texicryl® 13-819 is an emulsion vehicle with unique plasticiser technology. Good heat/blocking resistance, for highest gloss applications. | |
| EBECRYL® 4513 | Allnex | EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formula...view more EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing. view less | Request Sample |
| EBECRYL® 4396 | Allnex | EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formul...view more EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV/EB curing coatings to improve the adhesion on substrates such as plastic, metal and exotic woods. view less | Request Sample |
| EBECRYL® 4587 | Allnex | EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance...view more EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate for use in ultraviolet (UV) and electron beam (EB) energy curable coatings. Coatings based on EBECRYL® 4587 are characterized by high gloss, scratch resistance, and resistance to water, alcohol, solvents, and household chemicals. EBECRYL® 4587 allows the formulation of UV/EB energy curable waterborne coatings free of reactive diluents, solvents and amines, as clear or pigments systems in glossy or matt finishes. view less | Request Sample |
| JONCRYL® HPD 71 | BASF Dispersions & Resins | JONCRYL HPD 71 is a cost-effective, high molecular weight resin solution for pigment dispersion applications. | |
| Stearyl Acrylate (STA) | Kowa American Corporation | Stearyl Acrylate (STA) is a clear liquid above 30°C and a white waxy solid below 28°C. When shipped, it is packed in 153Kg (337lb) net wt. steel drums. | Request Sample |
| Aliphatic Urethane Acrylate SU 500 | Soltech Ltd | Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings,...view more Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings, overprint varnishes, adhesives, and wood flooring. Aliphatic Urethane Acrylate SU 500 is 78% polymer solid by weight with a mPa.s viscosity of 1,200-2,000 at 60℃. view less | |
| Aliphatic Urethane Acrylate SU 514 | Soltech Ltd | Aliphatic Urethane Acrylate SU 514 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion, abrasion resistance, and scratch resistance. Common applications of this product include screen inks, p...view more Aliphatic Urethane Acrylate SU 514 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion, abrasion resistance, and scratch resistance. Common applications of this product include screen inks, plastic coatings, light stable coatings, and overprint varnishes. Aliphatic Urethane Acrylate SU 514 is 90% polymer solid by weight with a mPa.s viscosity of 7,000-10,000 at 60℃. view less | |
| Aliphatic Urethane Acrylate SU 542 | Soltech Ltd | Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings,...view more Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 542 is 100% polymer solid by weight with a mPs.s viscosity of 500-1,000 at 60℃. view less | |
| Aliphatic Urethane Acrylate SU 543 | Soltech Ltd | Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, ...view more Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 543 is 100% polymer solid by weight with a mPs.s viscosity of 100-300 at 60℃. view less | |
| Soluryl R-20B | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-20B is a mid Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended in paper coating and let down vehicle for carton paper. | |
| Soluryl R-90 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-90 is a high Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended in paper coating and Let down vehicle for carton paper. | |
| Soluryl R-92 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-92 is a high Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended for paper coating and let down vehicle for carton paper. | |
| Soluryl R-9020 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-9020 is a high Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended for paper coating and let down vehicle for carton paper. |
