| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...view more Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...view more Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...view more Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...view more Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. view less | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...view more Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. view less | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...view more Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. view less | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| TEGO® Dispers 689 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 689 promotes the incorporation of matting agents in radiation-curing formulations. It enables strong matting effect and is solvent-free. | Request Sample |
| ACEMATT® OK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints and Coatings. ACEMATT® OK 520 is an easily dispersible, organically treated matting agent suitable for general applications. This matting agent allows ex...view more ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints and Coatings. ACEMATT® OK 520 is an easily dispersible, organically treated matting agent suitable for general applications. This matting agent allows exceptional surface characteristics with excellent slip-effect, also in pigmented coatings. As a result of its outstanding suspension behavior, it is especially suitable for use in clear coats. view less | Request Sample |
| CERAFLOUR® 1000 | BYK | CERAFLOUR® 1000 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, and solvent-free systems for matting and improving surface protection and haptics (soft feel effect). It boasts go...view more CERAFLOUR® 1000 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, and solvent-free systems for matting and improving surface protection and haptics (soft feel effect). It boasts good matting, especially also in radiation curable systems. view less | |
| TEGO® Dispers 686 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 686 is a pigment-wetting and dispersing additive. It is especially suitable to prepare solventborne concentrates of matting agents. The dried concentrate of matting agent can be re-dispersed at low shear force. | Request Sample |
| EBECRYL® 898 | Allnex | EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is...view more EBECRYL® 898 is a special purpose, 100% solids tetra functional polyester acrylate that extends the matting effect of a silica containing formulation. It is characterized by extended matting effect, low viscosity, low odour, and fast cure. This product is recommended for wood and plastic coatings, paper upgrading, flexographic inks, and EB cured paper-foil coatings. view less | Request Sample |
| ACEMATT® OK 412 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This effective matting agent is suitable for pigmented coatings. Due to the remarkable suspension be...view more ACEMATT® OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This effective matting agent is suitable for pigmented coatings. Due to the remarkable suspension behavior, ACEMATT® OK 412 is particularly suitable for clear coatings and other non-pigmented systems. The physical properties of this product makes it an all-purpose matting agent which obtains films with excellent surface smoothness. view less | Request Sample |
| ACEMATT® 790 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 790 as untreated, fine particle sized precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. | Request Sample |
| DAPRO® FA-NCO-6 | Elementis | DAPRO® FA-NCO-6 is a solventborne dispersion of flatting agents in mineral sprits. It provides simple stir-in incorporation, uniform and efficient gloss reduction and consistency. | |
| ACEMATT® OK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 390 is a wax-treated, finer-grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. | Request Sample |
| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| SIPERNAT® 622 LS | Evonik Operations GmbH, BL Coating Additives | SIPERNAT® 622 LS is an untreated, finely ground silica. This specialty silica provides good matting efficiency with minimal viscosity increase in printing ink applications. | Request Sample |
| LUBA-print 706/F | Munzing Chemie | LUBA-print 706/F is a white butyl acetate wax dispersion additive for wood lacquers. It is used in wood lacquers to improve matting and scratch resistance. | |
| TEGO® Dispers 688 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 688 is a clear to slightly hazy liquid, high molecular weight polymer. It is a wetting and dispersing additive for radiation-curing formulations and for matte UV coatings. It stabilizes matting agents and has outstanding viscosity reduction....view more TEGO® Dispers 688 is a clear to slightly hazy liquid, high molecular weight polymer. It is a wetting and dispersing additive for radiation-curing formulations and for matte UV coatings. It stabilizes matting agents and has outstanding viscosity reduction. TEGO® Dispers 688 gives positive impact on the rheological profile of the UV coatings even at high matting agent levels. During production and application of matte UV coatings, improved processing of this product is achieved. view less | Request Sample |
| LUBA-print 645 | Munzing Chemie | LUBA-print 645 is a white polymer combination wax dispersion additive for paints and printing inks. It is used in aqueous lacquers to improve matting and abrasion resistance. | |
| LUBA-print 645/A | Munzing Chemie | LUBA-print 645/A is a white non-ionic wax dispersion additive for paints and printing inks. It is used aqueous lacquers to improve matting and abrasion resistance. | |
| LUBA-print 552/D | Munzing Chemie | LUBA-print 552/D is a white non-ionic wax dispersion additive for paint and printing inks. It is used in aqueous lacquers to improve matting and abrasion resistance. | |
| ACEMATT® HK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 390 is an untreated, finer grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
| LUBA-print B 15/XB | Munzing Chemie | LUBA-print B 15/XB is a white polyethylene wax dispersion additive for paints and printing inks. It is used in wood lacquers, to improve matting effects and mar resistance. | |
| Chemisnow® MZ-10HN | Kowa American Corporation | Chemisnow® MZ-10HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-12H | Kowa American Corporation | Chemisnow® MZ-12H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-16H | Kowa American Corporation | Chemisnow® MZ-16H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-20HN | Kowa American Corporation | Chemisnow® MZ-20HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-30H | Kowa American Corporation | Chemisnow® MZ-30H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| GENOMER* 7287 | Rahn USA Corp. | GENOMER* 7287 is a specialty resin for radically curable inks and coatings. It has been developed for the use in matte UV curing inks and coatings. This product is recommended for use in the following applications: very low gloss coatings; sprayable, very low gloss coatings on plastic packaging; flexo inks; wood coatings; and screen inks. The low viscosity allows a high load of matting agent. The matting...view more GENOMER* 7287 is a specialty resin for radically curable inks and coatings. It has been developed for the use in matte UV curing inks and coatings. This product is recommended for use in the following applications: very low gloss coatings; sprayable, very low gloss coatings on plastic packaging; flexo inks; wood coatings; and screen inks. The low viscosity allows a high load of matting agent. The matting effect is only achieved when GENOMER* 7287 is combined with other oligomers or monomers. view less | Request Sample |
| CERAFLOUR® 1001 | BYK | CERAFLOUR® 1001 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining optimal transparency. ...view more CERAFLOUR® 1001 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining optimal transparency. It creates a soft feel effect. view less | |
| ACEMATT® TS 100 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® TS 100 is a high performance matting agent adding versatility to your nail polish formulations. Only low levels of addition give a matt or crackle finish. The product, which is a fumed silica is listed with the INCI name 'Silica'. | Request Sample |
| CERAFLOUR® 920 | BYK | CERAFLOUR® 920 is a micronized organic polymer for matting water-borne and solvent-borne paint systems. This product can be used in most paint formulations. The additive improves the following surface properties: scratch resistance, sandability, metal mar...view more CERAFLOUR® 920 is a micronized organic polymer for matting water-borne and solvent-borne paint systems. This product can be used in most paint formulations. The additive improves the following surface properties: scratch resistance, sandability, metal marking resistance and gloss reduction. view less | |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...view more Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. view less | |
| B507 | Tianyi Chemical Engineering Material Co., Ltd. | B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B507, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B307 | Tianyi Chemical Engineering Material Co., Ltd. | B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B307, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B607 | Tianyi Chemical Engineering Material Co., Ltd. | B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B607, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B207 | Tianyi Chemical Engineering Material Co., Ltd. | B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B207, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B205 | Tianyi Chemical Engineering Material Co., Ltd. | B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B205, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| A163 | Tianyi Chemical Engineering Material Co., Ltd. | A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more A163, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| B596 | Tianyi Chemical Engineering Material Co., Ltd. | B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 ...view more B596, in the form of a dry, white, micronized powder, is a matting agent that can be used in coatings, oil ink systems, and diversified baking paints. This product features high transparency, recoatability, and deposit resistance. Its pH is between 5.5 and 7.0. view less | |
| LUBA-print 973 | Munzing Chemie | LUBA-print 973 is a white polyethylene wax dispersion additive for paints and printing inks. It is used in wood lacquers to improve matting effects and mar resistance and to improve the anti-sedimentation. | |
| LUBA-print C 10/XB | Munzing Chemie | LUBA-print C 10/XB is a yellowish-white amide wax dispersion additive for paints and printing inks. It is used in wood varnishes to improve mar resistance, matting, hydrophobicity, anti-blocking and sanding. | |
| LUBA-print 967/A | Munzing Chemie | LUBA-print 967/A is an opaque-yellowish functional blend wax dispersion additive for paints and printing inks. It is used in water based care product for parquet floors with anti-slip and matting effects. | |
| ACEMATT® HK 125 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 125 is a high performance, untreated coarse-grained precipitated silica with heterogeneous particle size distribution. This efficient matting agent is particularly suitable for pigmented systems with low sheen, 85° reflectometer value. ACEMAT...view more ACEMATT® HK 125 is a high performance, untreated coarse-grained precipitated silica with heterogeneous particle size distribution. This efficient matting agent is particularly suitable for pigmented systems with low sheen, 85° reflectometer value. ACEMATT® HK 125 is often used in wood and decorative coatings. view less | Request Sample |
| SYNTHACRYL® 700 | Allnex | SYNTHACRYL® 700 is a glycidyl functionalized polyacrylic resin designed as a matting harder for carboxylated polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2441-2 cured with SYNTHACRYL® 700produce outstandingly smooth, dead ma...view more SYNTHACRYL® 700 is a glycidyl functionalized polyacrylic resin designed as a matting harder for carboxylated polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2441-2 cured with SYNTHACRYL® 700produce outstandingly smooth, dead matte finishes. view less | Request Sample |
| CERAFLOUR® 1002 | BYK | CERAFLOUR® 1002 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining high transparency. It ...view more CERAFLOUR® 1002 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining high transparency. It creates a soft feel effect and a slightly textured surface. view less | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...view more Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). view less | |
| LUBA-print A 620 | Munzing Chemie | LUBA-print A 620 is a white polyethylene wax dispersion additive for paints and printing inks. It is used in wood varnishes to improve matting effects and mar resistance. It is used in plastic paints to improve slip property. | |
| ACEMATT® HK 400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 400 is a high performance, untreated fine-grained precipitated silica developed for a variety of applications in paints and coatings. This matting agent is primarily used in pigmented coatings systems. ACEMATT® HK 400 is widley used in can and...view more ACEMATT® HK 400 is a high performance, untreated fine-grained precipitated silica developed for a variety of applications in paints and coatings. This matting agent is primarily used in pigmented coatings systems. ACEMATT® HK 400 is widley used in can and coil coatings, decorative, wood, and industrial coatings. view less | Request Sample |
| CRYLCOAT® E 04876 | Allnex | CRYLCOAT® E 04876 is a carboxylated polyester resin for use with 6% TGIC in production of powder coatings. Coatings based on CRYLCOAT® E 04876 exhibit good flow, good flexibility in high gloss application, and the resin shows excellent matting efficiency...view more CRYLCOAT® E 04876 is a carboxylated polyester resin for use with 6% TGIC in production of powder coatings. Coatings based on CRYLCOAT® E 04876 exhibit good flow, good flexibility in high gloss application, and the resin shows excellent matting efficiency. view less | Request Sample |
| SYNTHACRYL® 710 | Allnex | SYNTHACRYL® 710 is a glycidyl functional polyacrylic resin designed as matting hardener for carboxyl functional polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2630-2 cured with SYNTHACRYL® 710 and Primid® XL 552 produce outsta...view more SYNTHACRYL® 710 is a glycidyl functional polyacrylic resin designed as matting hardener for carboxyl functional polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2630-2 cured with SYNTHACRYL® 710 and Primid® XL 552 produce outstandingly smooth, dead matte finishes. view less | Request Sample |
| ATM1011 | Tianyi Chemical Engineering Material Co., Ltd. | ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM1011, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. view less | |
| ATM9003 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9003, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution. view less | |
| ATM9000 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9000, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution view less | |
| ATM9006 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9006, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution view less | |
| ATM9030 | Tianyi Chemical Engineering Material Co., Ltd. | ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solve...view more ATM9030, in the form of a dry, white, granular powder, is a matting agent that can be used in high-end coatings and oil inks. This product has good dispersibility and is compatible with a number of substrates. Its pH is between 6.0 and 7.0 in a 5% solvent solution view less | |
| CERETAN P 21 | Munzing Chemie | CERETAN P 21 is a white powder that is a non-polar polypropylene wax. It has low viscosity, good dispersion and incorporation, matting effects, abrasion resistance, and lubricating properties. It is commonly used in printing inks, paints and coatings, and...view more CERETAN P 21 is a white powder that is a non-polar polypropylene wax. It has low viscosity, good dispersion and incorporation, matting effects, abrasion resistance, and lubricating properties. It is commonly used in printing inks, paints and coatings, and pigment concentrates. view less | |
| LUBA-print 914/A | Munzing Chemie | LUBA-print 914/Ais a white functional blend wax dispersion additive for paints and printing inks. It is used in wood lacquers for matting and to improve soft feel. It is also used to improve scratch resistance with good anti-blocking properties. | |
| CERETAN MXS 3815 | Munzing Chemie | CERETAN MXS 3815 is a white fine powder that is a spherical, micronized functional blend, coated with silica. It has high transparency and provides matting effect, scratch resistance, and is a slip agent. It is commonly used in printing inks, paints and w...view more CERETAN MXS 3815 is a white fine powder that is a spherical, micronized functional blend, coated with silica. It has high transparency and provides matting effect, scratch resistance, and is a slip agent. It is commonly used in printing inks, paints and wood and industrial coatings. view less | |
| ACEMATT® HK 440 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 440 is a high performance, untreated extremely coarse-grained precipitated silica developed for a variety of applications in paint and coatings. This product is particularly suitable for pigmented coatings systems with very low sheen, 85° reflectometer value. This highly efficient matting...view more ACEMATT® HK 440 is a high performance, untreated extremely coarse-grained precipitated silica developed for a variety of applications in paint and coatings. This product is particularly suitable for pigmented coatings systems with very low sheen, 85° reflectometer value. This highly efficient matting agent is used in decorative and industrial coatings, base coats and thick-film coatings. view less | Request Sample |
| PAT-ADD DA 817 | Patcham USA | PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting...view more PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting agents, and prevents hard sedimentation in waterborne as well as solvent-borne primers. view less | |
| EH9020 NPT Silky Cotton White | Rutland Plastics Technologies Inc. | EH9020 Silky Cotton White is a ready to print ink that was designed for maximum opacity and smoothness on cotton fabrics. It has good matting attributes, and works well with automatic and manual presses. This product is fast flashing, allows for shorter d...view more EH9020 Silky Cotton White is a ready to print ink that was designed for maximum opacity and smoothness on cotton fabrics. It has good matting attributes, and works well with automatic and manual presses. This product is fast flashing, allows for shorter dwell times, and faster production rates. view less | |
| CERETAN MM 8120 | Munzing Chemie | CERETAN MM 8120 is a spherical, micronized montan wax. It has good matting effect, surface properties, adhesion and is less hydrophobic than other micronized waxes. It is commonly used in paints and powder, automotive, industrial, furniture and UV curing...view more CERETAN MM 8120 is a spherical, micronized montan wax. It has good matting effect, surface properties, adhesion and is less hydrophobic than other micronized waxes. It is commonly used in paints and powder, automotive, industrial, furniture and UV curing systems, as well as overprint, screen, flexo, offset and intaglio inks. view less | |
| CRYLCOAT® 1716-0 | Allnex | CRYLCOAT® 1716-0 is a medium reactive carboxylated polyester resin designed for 70/30 hybrid powder coatings. Formulations based on CRYLCOAT® 1716-0 exhibit very good flow with very high gloss. Matte coatings can be obtained when this product is formulated with former Vestagon® B 68 type matting...view more CRYLCOAT® 1716-0 is a medium reactive carboxylated polyester resin designed for 70/30 hybrid powder coatings. Formulations based on CRYLCOAT® 1716-0 exhibit very good flow with very high gloss. Matte coatings can be obtained when this product is formulated with former Vestagon® B 68 type matting hardener (Evonik). view less | Request Sample |
| CERETAN MP 2120 | Munzing Chemie | CERETAN MP 2120 is a micronized polypropylene wax. It is a matting and slip agent, has scratch resistance and provides a soft feel effect. It is commonly used in paints and coatings, such as powder coatings, industrial paints, architectural, furniture and...view more CERETAN MP 2120 is a micronized polypropylene wax. It is a matting and slip agent, has scratch resistance and provides a soft feel effect. It is commonly used in paints and coatings, such as powder coatings, industrial paints, architectural, furniture and floor coatings, as well as gravure, overprint, screen printing and flexographic inks. view less | |
| CERETAN MM 8220 | Munzing Chemie | CERETAN MM 8220 is a spherical, micronized, partially hydrolysed montan wax. It has good matting effect, surface properties, adhesion and is less hydrophobic than other micronized waxes. It is commonly used in paints and powder, automotive, industrial, fu...view more CERETAN MM 8220 is a spherical, micronized, partially hydrolysed montan wax. It has good matting effect, surface properties, adhesion and is less hydrophobic than other micronized waxes. It is commonly used in paints and powder, automotive, industrial, furniture and UV curing systems, as well as overprint, screen, flexo, offset and intaglio inks. view less | |
| ACEMATT® 810 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and de...view more ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and decorative and industrial coatings as well. ACEMATT® 810 is easily and evenly dispersed in coatings, and does not adversely affect the other application properties of coating systems. view less | Request Sample |
| ACEMATT® 3400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associativ...view more ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates. view less | Request Sample |
| ACEMATT® 3300 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterized by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements. It is used for water-based coatin...view more ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterized by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements. It is used for water-based coatings, waterborne UV coatings, coatings for leather and films, and all types of top coats. Coating formulations containing this product has also shown outstanding resistance to household chemicals. view less | Request Sample |
| EL9021 Silky LB White | Rutland Plastics Technologies Inc. | EL9021 Silky LB White is a ready to print ink that was designed for maximum opacity and smoothness on cotton and poly fabrics. It has good matting characteristics, a creamy consistency, and is designed to print on both automatic and manual presses. This p...view more EL9021 Silky LB White is a ready to print ink that was designed for maximum opacity and smoothness on cotton and poly fabrics. It has good matting characteristics, a creamy consistency, and is designed to print on both automatic and manual presses. This product has fast production rates, and allows for shorter dwell times. view less | |
| CERETAN MM 8015 | Munzing Chemie | CERETAN MM 8015 is a white (slightly yellow) fine powder that is spherical, micronized montan wax. It has high matting, good surface properties and adhesion and is less hydrophobic than other micronized waxes. It is commonly used in paints and powder, aut...view more CERETAN MM 8015 is a white (slightly yellow) fine powder that is spherical, micronized montan wax. It has high matting, good surface properties and adhesion and is less hydrophobic than other micronized waxes. It is commonly used in paints and powder, automotive, industrial, furniture and UV curing systems, as well as overprint, screen, flexo, offset and intaglio inks. view less | |
| CERETAN MM 8920 | Munzing Chemie | CERETAN MM 8920 is a white (slightly yellow) fine powder that is spherical, micronized modified montan wax. It has good matting effect, surface properties, adhesion and is less hydrophobic than other micronized waxes. It is commonly used in paints and pow...view more CERETAN MM 8920 is a white (slightly yellow) fine powder that is spherical, micronized modified montan wax. It has good matting effect, surface properties, adhesion and is less hydrophobic than other micronized waxes. It is commonly used in paints and powder, automotive, industrial, furniture and UV curing systems, as well as overprint, screen, flexo, offset and intaglio inks. view less | |
| ACEMATT® OK 500 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 500 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This product is suitable for pigmented and non-pigmented systems, and due to the excellent suspension behavior, it is particularly applicable in clear coatings. The physical properties of ACEMATT® OK 500 makes it an all-purpose matting...view more ACEMATT® OK 500 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This product is suitable for pigmented and non-pigmented systems, and due to the excellent suspension behavior, it is particularly applicable in clear coatings. The physical properties of ACEMATT® OK 500 makes it an all-purpose matting agent which obtains superior surface smoothness on films. view less | Request Sample |
| OMBRELUB MA 2 | Munzing Chemie | OMBRELUB MA 2 is a white stable matting agent dispersion for water-based printing inks, wood coatings and other coatings. Due to its small particle size it is suitable for low wet film thicknesses. OMBRELUB MA 2 is specifically suitable to achieve semi ma...view more OMBRELUB MA 2 is a white stable matting agent dispersion for water-based printing inks, wood coatings and other coatings. Due to its small particle size it is suitable for low wet film thicknesses. OMBRELUB MA 2 is specifically suitable to achieve semi matt effects and provides outstanding transparency. Furthermore it increases scratch and chemical resistance of the coating. In many coatings the use of OMBRELUB MA 2 leads to a soft feel touch. view less | |
| CERETAN MPF 2520 D | Munzing Chemie | CERETAN MPF 2520 D is a white fine powder that is a micronized polypropylene wax, coated with PTFE. It has good scratch resistance, anti-blocking, matting and slipping agent properties, and repels water. It is commonly used in paints and coatings, such as...view more CERETAN MPF 2520 D is a white fine powder that is a micronized polypropylene wax, coated with PTFE. It has good scratch resistance, anti-blocking, matting and slipping agent properties, and repels water. It is commonly used in paints and coatings, such as powder, can, industrial, furniture and parquet coatings, as well as gravure, overprint, screen, flexo, heatset, sheetfed, and coldset inks. view less | |
| AFCONA - 5285 | AFCONA Additives Sdn Bhd | AFCONA – 5285 is an anionic co-polymer with acidic groups. This yellow to dark brown liquid functions as a wetting and dispersing additive for solvent-based paints. AFCONA – 5285 provides anchoring in base pigments for inorganic pigments and matting agent...view more AFCONA – 5285 is an anionic co-polymer with acidic groups. This yellow to dark brown liquid functions as a wetting and dispersing additive for solvent-based paints. AFCONA – 5285 provides anchoring in base pigments for inorganic pigments and matting agents, and reduces viscosity in filler and extender dispersions, finding application in oil and solvent-based printing inks in alcohol rich systems. view less | |
| ACEMATT® OK 607 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 is a high performance, very fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This matting agent is suitable for pigmented, as well as non-pigmented systems. ACEMATT® OK 607 ...view more ACEMATT® OK 607 is a high performance, very fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This matting agent is suitable for pigmented, as well as non-pigmented systems. ACEMATT® OK 607 provides a high sheen, 85° reflectometer value, and is very suitable for thin-film coatings. Due to the suspension behavior, it is also particularly applicable in clear coatings which obtains films with the highest surface smoothness. view less | Request Sample |
| Sylosphere | Fuji Silysia Chem. Ltd. | Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, ...view more Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, and dispersivity characteristics are also found in Sylosphere. Sylosphere is used in plastics, paper and ink, in paints, and in cosmetics and perfume. view less | |
| CERETAN MO 4715 | Munzing Chemie | CERETAN MO 4715 is a white fine powder that is a spherical, micronized, polar, polyethylene wax. It has good abrasion and scratch resistance, slip and anti-blocking properties, matting effect and has provides a soft feel effect. it is commonly used in wat...view more CERETAN MO 4715 is a white fine powder that is a spherical, micronized, polar, polyethylene wax. It has good abrasion and scratch resistance, slip and anti-blocking properties, matting effect and has provides a soft feel effect. it is commonly used in water-based paints and coatings, such as industrial paints, furniture and floor coatings, as well as printing inks, such as packaging and gravure inks. view less | |
| AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting...view more AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. view less | Request Sample |
| Mirel™ M Grade Resins | Metabolix | Mirel™ Virgin biobased PHA resins range from crystalline to amorphous. They can be used as binders in solvent based paints, coatings, and Inks. They are soluble in many industrial solvent systems. Mirel™ Virgin biobased PHA resins can also be used in powder form for matting...view more Mirel™ Virgin biobased PHA resins range from crystalline to amorphous. They can be used as binders in solvent based paints, coatings, and Inks. They are soluble in many industrial solvent systems. Mirel™ Virgin biobased PHA resins can also be used in powder form for matting etc. In aqueous formulations, Mirel™ Virgin biobased PHA resins are biodegradable in soil and in marine and fresh water environments. view less | |
| Chemisnow® MX-80H3wT | Kowa American Corporation | Chemisnow® MX-80H3wT is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-150 | Kowa American Corporation | Chemisnow® MX-150 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-180 | Kowa American Corporation | Chemisnow® MX-180 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-300 | Kowa American Corporation | Chemisnow® MX-300 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-500 | Kowa American Corporation | Chemisnow® MX-500 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-1000 | Kowa American Corporation | Chemisnow® MX-1000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-2000 | Kowa American Corporation | Chemisnow® MX-2000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-3000 | Kowa American Corporation | Chemisnow® MX-3000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-1HG | Kowa American Corporation | Chemisnow® MR-1HG is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-2G | Kowa American Corporation | Chemisnow® MR-2G is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-5C | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-7GC | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® SX-130H | Kowa American Corporation | Chemisnow® SX-130H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-350H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-500H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
