UL Prospector

Success!

Successfully saved your search
Request Sample 1,9-Nonanediol Diacrylate (V-260) Kowa American Corp/ San Esters Corp. 1,9-Nonanediol Diacrylate (V-260) is a clear to light yellow liquid. It freezes below 0°C and has a boiling point above 250°C.
Request Sample 2-Acryloyloxypropyl Phthalate (V-2100) Kowa American Corp/ San Esters Corp. 2-Acryloyloxypropyl Phthalate (V-2100) is a specialty monomer from the Osaka Organic Chemical Ind., Ltd.
Request Sample 2-Dimethylaminoethyl Methacrylate (DMMA-D) Kowa American Corp/ San Esters Corp. 2-Dimethylaminoethyl Methacrylate (DMMA-D) is a clear liquid.
Request Sample 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) Kowa American Corp/ San Esters Corp. 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) is a clear water white liquid. It has mehq and phenothiazine (PTZ) as inhibitors.
Request Sample 2-Ethoxyethyl Methacrylate (ETMA) Kowa American Corp/ San Esters Corp. 2-Ethoxyethyl Methacrylate (ETMA) is a clear water white liquid. It has the viscosity range of 2 - 6 cps at 25°C.
Request Sample 2-HEMA-Phosphate Kowa American Corp/ San Esters Corp. 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Pho...view more 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Phosphate can be used in pigment systems to promote adhesion. view less
Request Sample 2-Hydroxyethyl Acrylate (HEA) Kowa American Corp/ San Esters Corp. 2-Hydroxyethyl Acrylate (HEA) is a clear water white liquid. It has a boiling point 82°C and a freezing point of below -70°C.
Request Sample 2-Hydroxyethyl Methacrylate (HEMA) Kowa American Corp/ San Esters Corp. 2-Hydroxyethyl Methacrylate (HEMA) is a clear water white liquid. It has 6.79 cps viscosity at 20°C.
Request Sample 2-Hydroxyethyl Methacrylate (HISS) Kowa American Corp/ San Esters Corp. 2-Hydroxyethyl Methacrylate (HISS) is 0.1% water and has 10 APHA of color when shipped.
Request Sample 2-Hydroxypropyl Methacrylate (HPMA) Kowa American Corp/ San Esters Corp. 2-Hydroxypropyl Methacrylate (HPMA) is a Mitsubishi Rayon methacrylate functional monomer.
Request Sample 2-Methoxyethyl Acrylate (MTA) Kowa American Corp/ San Esters Corp. 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, ...view more 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, water resistance and adhesion. When used as an additive, it improves oil resistance dues to its polarity. view less
Request Sample 2-Methoxyethyl Methacrylate (MTMA) Kowa American Corp/ San Esters Corp. 2-Methoxyethyl Methacrylate (MTMA) is 0.1% water and has 20 APHA of color when shipped.
Request Sample 200W™ Univar Solutions (formerly Nexeo Solutions) 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grout...view more 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grouts, ceramics, and coatings. view less
Request Sample 3NG810 Univar Solutions (formerly Nexeo Solutions) 3NG810 is an ester of TMP alcohol and C8C10 acid, and is used as a lubricant in synthetic engine oils.
Request Sample 4-Hydroxybutyl Acrylate (4HBA) Kowa American Corp/ San Esters Corp. 4-HBA is a clear water white liquid. It is used for automotive painting. It helps protect against hardness and anit-rust, as well as offers good color, flatness, smoothness, brightness, and gloss.
Request Sample 40-200™ Univar Solutions (formerly Nexeo Solutions) 40-200™ is a dry ground marble with a coarse particle size controlled between 40 and 200 mesh screens. It is widely used in applications with high loading levels such as cement finishes, textured coatings, and abrasives.
Request Sample A-2468 Aluminium Paste Univar Solutions (formerly Nexeo Solutions) A-2468 is a coarse non-leafing aluminum pigment with cornflake geometry.
Request Sample A-6205 Aluminium Paste Univar Solutions (formerly Nexeo Solutions) A-6205 is a standard grade; class B, medium sized, leafing aluminum pigment carried in C-66 exempt mineral spirits.
Request Sample A-6571FG Aluminum Paste Univar Solutions (formerly Nexeo Solutions) A-6571FG is a standard polished grade; class A, fine particle size, leafing aluminum pigment carried in C-66 exempt mineral spirits. A-6571FG is suitable for use in aerosol paints and maintenance coatings.
Request Sample ABEX® 18-S Univar Solutions (formerly Nexeo Solutions) ABEX® 18-S is an APE-free anionic, sodium salt that functions as both emulsifier and stabilizer in acrylic, vinyl/acrylic and styrene/acrylic systems. Provides electrolyte stability in these emulsion polymers.
Request Sample ACCULIN® 1000 (2071A) The International Group, Inc. (IGI Wax) ACCULIN® 1000 is a hard, high melting point polyethylene.
Request Sample ACCULIN® 2000 (2074A) The International Group, Inc. (IGI Wax) ACCULIN® 2000 is a hard, high melting point polyethylene.
Request Sample ACCULIN® 400 (2053A) The International Group, Inc. (IGI Wax) ACCULIN® 400 is a low melting point polyethylene.
Request Sample ACCULIN® 500 (2056A) The International Group, Inc. (IGI Wax) ACCULIN® 500 is a hard, low melting point polyethylene.
Request Sample ACCULIN® 600 (2059A) The International Group, Inc. (IGI Wax) ACCULIN® 600 is a hard, low melting point polyethylene.
Request Sample ACCULIN® 655 (2061A) The International Group, Inc. (IGI Wax) ACCULIN® 655 is a hard, low melting point polyethylene.
Request Sample ACCULIN® 725 (2063A) The International Group, Inc. (IGI Wax) ACCULIN® 725 is a hard, low melting point polyethylene.
Request Sample ACCULIN® 850 (2068A) The International Group, Inc. (IGI Wax) ACCULIN® 850 is a hard, mid-melting point polyethylene.
Request Sample ACEMATT® 3300 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterized by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements. It is used for water-based coatin...view more ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterized by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements. It is used for water-based coatings, waterborne UV coatings, coatings for leather and films, and all types of top coats. Coating formulations containing this product has also shown outstanding resistance to household chemicals. view less
Request Sample ACEMATT® 3400 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associativ...view more ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates. view less
Request Sample ACEMATT® 3600 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low th...view more ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low thickening effect and high chemical resistance. It is particularly suitable for use in very thin or very thick UV-coating. view less
Request Sample ACEMATT® 790 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® 790 as untreated, fine particle sized precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems.
Request Sample ACEMATT® 810 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and de...view more ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and decorative and industrial coatings as well. ACEMATT® 810 is easily and evenly dispersed in coatings, and does not adversely affect the other application properties of coating systems. view less
Request Sample ACEMATT® HK 125 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® HK 125 is a high performance, untreated coarse-grained precipitated silica with heterogeneous particle size distribution. This efficient matting agent is particularly suitable for pigmented systems with low sheen, 85° reflectometer value. ACEMAT...view more ACEMATT® HK 125 is a high performance, untreated coarse-grained precipitated silica with heterogeneous particle size distribution. This efficient matting agent is particularly suitable for pigmented systems with low sheen, 85° reflectometer value. ACEMATT® HK 125 is often used in wood and decorative coatings. view less
Request Sample ACEMATT® HK 400 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® HK 400 is a high performance, untreated fine-grained precipitated silica developed for a variety of applications in paints and coatings. This matting agent is primarily used in pigmented coatings systems. ACEMATT® HK 400 is widley used in can and...view more ACEMATT® HK 400 is a high performance, untreated fine-grained precipitated silica developed for a variety of applications in paints and coatings. This matting agent is primarily used in pigmented coatings systems. ACEMATT® HK 400 is widley used in can and coil coatings, decorative, wood, and industrial coatings. view less
Request Sample ACEMATT® HK 440 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® HK 440 is a high performance, untreated extremely coarse-grained precipitated silica developed for a variety of applications in paint and coatings. This product is particularly suitable for pigmented coatings systems with very low sheen, 85° refl...view more ACEMATT® HK 440 is a high performance, untreated extremely coarse-grained precipitated silica developed for a variety of applications in paint and coatings. This product is particularly suitable for pigmented coatings systems with very low sheen, 85° reflectometer value. This highly efficient matting agent is used in decorative and industrial coatings, base coats and thick-film coatings. view less
Request Sample ACEMATT® HK 450 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® HK 450 is a high performance, untreated coarse=grained precipitated silica developed for a variety of applications in paints and coatings. This high efficient matting agent is particularly suitable for pigmented coatings systems. ACEMATT® HK 450 ...view more ACEMATT® HK 450 is a high performance, untreated coarse=grained precipitated silica developed for a variety of applications in paints and coatings. This high efficient matting agent is particularly suitable for pigmented coatings systems. ACEMATT® HK 450 is used in can and coil coatings, as well as decorative and industrial coatings. view less
Request Sample ACEMATT® OK 412 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This effective matting agent is suitable for pigmented coatings. Due to the remarkable suspension be...view more ACEMATT® OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This effective matting agent is suitable for pigmented coatings. Due to the remarkable suspension behavior, ACEMATT® OK 412 is particularly suitable for clear coatings and other non-pigmented systems. The physical properties of this product makes it an all-purpose matting agent which obtains films with excellent surface smoothness. view less
Request Sample ACEMATT® OK 500 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® OK 500 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This product is suitable for pigmented and non-pigmented systems, and due to the excellent suspension...view more ACEMATT® OK 500 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This product is suitable for pigmented and non-pigmented systems, and due to the excellent suspension behavior, it is particularly applicable in clear coatings. The physical properties of ACEMATT® OK 500 makes it an all-purpose matting agent which obtains superior surface smoothness on films. view less
Request Sample ACEMATT® OK 520 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints and Coatings. ACEMATT® OK 520 is an easily dispersible, organically treated matting agent suitable for general applications. This matting agent allows ex...view more ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints and Coatings. ACEMATT® OK 520 is an easily dispersible, organically treated matting agent suitable for general applications. This matting agent allows exceptional surface characteristics with excellent slip-effect, also in pigmented coatings. As a result of its outstanding suspension behavior, it is especially suitable for use in clear coats. view less
Request Sample ACEMATT® OK 607 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® OK 607 is a high performance, very fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This matting agent is suitable for pigmented, as well as non-pigmented systems. ACEMATT® OK 607 ...view more ACEMATT® OK 607 is a high performance, very fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This matting agent is suitable for pigmented, as well as non-pigmented systems. ACEMATT® OK 607 provides a high sheen, 85° reflectometer value, and is very suitable for thin-film coatings. Due to the suspension behavior, it is also particularly applicable in clear coatings which obtains films with the highest surface smoothness. view less
Request Sample ACEMATT® OK 607 LC Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica. It is mainly used as a high-purity filler for e-coats due to its outstanding suspension behaviour and low electrical conductivity.
Request Sample ACEMATT® OK 900 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® OK 900 is a treated precipitated silica with a medium particle size.
Request Sample ACEMATT® TS 100 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® TS 100 is a high performance matting agent adding versatility to your nail polish formulations. Only low levels of addition give a matt or crackle finish. The product, which is a fumed silica is listed with the INCI name 'Silica'.
Request Sample ACEMATT® TS 100/20 Evonik Resource Efficiency GmbH, BL Coating Additives ACEMATT® TS 100/20 is an untreaated thermal silica characterized by very high matting efficiency combined with high transparency. Thanks to the unique properties, ACEMATT® TS 100/20 is particularly suitable for coating systems that are difficult to matt. ...view more ACEMATT® TS 100/20 is an untreaated thermal silica characterized by very high matting efficiency combined with high transparency. Thanks to the unique properties, ACEMATT® TS 100/20 is particularly suitable for coating systems that are difficult to matt. It is also used for water-based coatings, waterborne UV coatings, clear coatings, coatings for leather and films, and all types of top coats. ACEMATT® TS 100/20 also improves the flow behavior and increases storage stability in powder coatings. view less
Request Sample ACMO Rahn USA Corp. ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...view more ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. view less
Request Sample ACTFLOW® 1-A Kowa American Corp/ San Esters Corp. ACTFLOW® 1-A is apart of a liquid type acrylic polymer range. ACTFLOW® 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal...view more ACTFLOW® 1-A is apart of a liquid type acrylic polymer range. ACTFLOW® 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® CB-3060 Kowa American Corp/ San Esters Corp. ACTFLOW® CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exce...view more ACTFLOW® CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® CB-3098 Kowa American Corp/ San Esters Corp. ACTFLOW® CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and e...view more ACTFLOW® CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® CBB-3098 Kowa American Corp/ San Esters Corp. ACTFLOW® CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and...view more ACTFLOW® CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW® CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® NE-1000 Kowa American Corp/ San Esters Corp. ACTFLOW® NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW® NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...view more ACTFLOW® NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW® NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® NE-3000 Kowa American Corp/ San Esters Corp. ACTFLOW® NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW® NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...view more ACTFLOW® NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW® NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ACTFLOW® UMM-1001 Kowa American Corp/ San Esters Corp. ACTFLOW® UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW® UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and e...view more ACTFLOW® UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW® UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as a plasticizer replacements, modifying agents and additive agents. view less
Request Sample ACTFLOW® UT-1001 Kowa American Corp/ San Esters Corp. ACTFLOW® UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW® UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...view more ACTFLOW® UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW® UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW® grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW® grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less
Request Sample ADDID® 230 Evonik Resource Efficiency GmbH, BL Coating Additives ADDID® 230 is a yellowish, liquid antistatic additive. It is a formulation of solid salts and quaternary nitrogen compounds. This product is used for 2-pack coatings based on epoxies and polyurethanes.. It is solvent-free and increases electric conductivi...view more ADDID® 230 is a yellowish, liquid antistatic additive. It is a formulation of solid salts and quaternary nitrogen compounds. This product is used for 2-pack coatings based on epoxies and polyurethanes.. It is solvent-free and increases electric conductivity. It also is highly suitable for clears and has very good compatibility even at high addition levels. view less
Request Sample ADDID® 900 Evonik Resource Efficiency GmbH, BL Coating Additives ADDID® 900 is a diamino-functional trimethoxy silane adhesion promoter. It promotes adhesion on surfaces of siliceous, oxidic, metallic and ceramic nature. With this product excellent adhesion can be obtained on substrates like aluminum, glass, steel, pla...view more ADDID® 900 is a diamino-functional trimethoxy silane adhesion promoter. It promotes adhesion on surfaces of siliceous, oxidic, metallic and ceramic nature. With this product excellent adhesion can be obtained on substrates like aluminum, glass, steel, plastics and paper. Due to ADDID® 900's improved adhesion on pigment and fillers, improvements in pigment wetting, particle aggregation, and a reduction of sedimentation can be obtained. This results in improvements in the optical (e.g. gloss) and mechanical properties (e.g. resistance under wet conditions). view less
Request Sample ADDID® 911 Evonik Resource Efficiency GmbH, BL Coating Additives ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane.
Request Sample ADH Kowa American Corp/ San Esters Corp. ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...view more ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. view less
Request Sample AERODISP® W 1714 Evonik Resource Efficiency GmbH, BL Coating Additives AERODISP® W 1714 is a low thickening dispersion used in aqueous wood protection coatings, as an adhesion promoter for glass fiber and for antiblocking in cellophane.
Request Sample AERODISP® W 440 Evonik Resource Efficiency GmbH, BL Coating Additives AERODISP® W 440 is a waterborne dispersion with a high solids content and a slightly acidic pH. Application areas: Inkjet coatings for film and paper; enables the development of formulations at high solids content; creates transparent, high gloss, micropo...view more AERODISP® W 440 is a waterborne dispersion with a high solids content and a slightly acidic pH. Application areas: Inkjet coatings for film and paper; enables the development of formulations at high solids content; creates transparent, high gloss, microporous coatings; shortens ink drying times; optimizes print resolution for photo quality applications; provides excellent colorant fixation (dyes and pigment based inks); enhance rub and smudge resistance; improves water-resistance. view less
Request Sample AERODISP® W 7330 N Evonik Resource Efficiency GmbH, BL Coating Additives AERODISP® W 7330 N is a water-based dispersion of AEROSIL® fumed silica with a high solids content and an alkaline pH value. It is used in clear and pigmented waterborne sealants: efficient rheology control and reinforcement agent while maintaining high t...view more AERODISP® W 7330 N is a water-based dispersion of AEROSIL® fumed silica with a high solids content and an alkaline pH value. It is used in clear and pigmented waterborne sealants: efficient rheology control and reinforcement agent while maintaining high transparency, excellent dispersant for pigments, mixes easily with arylic, polyurethane and other waterborne latexes. view less
Request Sample AERODISP® W 7520 Evonik Resource Efficiency GmbH, BL Coating Additives AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabi...view more AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. view less
Request Sample AERODISP® W 7520 N Evonik Resource Efficiency GmbH, BL Coating Additives AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adh...view more AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. view less
Request Sample AERODISP® W 7520 P Evonik Resource Efficiency GmbH, BL Coating Additives AERODISP® W 7520 P is a low viscosity, water-based dispersionof AEROSIL® fumed silica, with a slightly alkaline pH.
Request Sample AERODISP® W 7622 Evonik Resource Efficiency GmbH, BL Coating Additives AERODISP® W 7622 is a low viscosity, water-based dispersion of AEROSIL® fumed silica with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7622 is used for stabil...view more AERODISP® W 7622 is a low viscosity, water-based dispersion of AEROSIL® fumed silica with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7622 is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. view less
Request Sample AERODISP® W 925 Evonik Resource Efficiency GmbH, BL Coating Additives AERODISP® W 925 is a dispersion based on AEROXIDE® Alu 130, Evonik's highest surface area fumed aluminum oxide. It is stabilized at a pH value of 4. Many applications can utilize the positive surface charge of the particles in this pH range.
Request Sample AERODISP® WK 341 Evonik Resource Efficiency GmbH, BL Coating Additives A cationic dispersion with a high solid content. The small surface area and particle size of the dispersed mixed oxide make it ideal for applications were low binder demand and high gloss are desired.
Request Sample AEROSIL® 200 Evonik Resource Efficiency GmbH, BL Coating Additives AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking chara...view more AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica' and holds a COSMOS certification. view less
Request Sample AEROSIL® 300 Evonik Resource Efficiency GmbH, BL Coating Additives AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of ap...view more AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less
Request Sample AEROSIL® 380 Evonik Resource Efficiency GmbH, BL Coating Additives AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and a...view more AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow aid. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less
Request Sample AEROSIL® MOX 80 Evonik Resource Efficiency GmbH, BL Coating Additives AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process.
Request Sample AEROSIL® OX 50 Evonik Resource Efficiency GmbH, BL Coating Additives AEROSIL® OX 50 is the fumed oxide of our portfolio with the smallest specific surface area. High chemical purity, distinct low thickening and agglomeration properties are typical characteristics.
Request Sample AEROSIL® R 812 S Evonik Resource Efficiency GmbH, BL Coating Additives AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be use...view more AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be used as a free flow agent and rheology controller. It is well known in products like styling agents (dry water) and dry shampoos. Using AEROSIL® R 812 S is also recommended for sprays (e.g. antiperspirant) and powder-to-cream applications (e.g. lipsticks). Its INCI-name is 'Silica silylate' view less
Request Sample AEROSIL® R 812 S Evonik Resource Efficiency GmbH, BL Coating Additives AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. It is used in paints and coatings, adhesives and sealants, and silicone rubber. AEROSIL® R 812 S can be applied in coatings asystems as an anti-settling agent, for the stabilizat...view more AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. It is used in paints and coatings, adhesives and sealants, and silicone rubber. AEROSIL® R 812 S can be applied in coatings asystems as an anti-settling agent, for the stabilization of pigments, and to enhance the effect of corrosion protection. It also can be easily be incorporated into silicone rubber formulations and improves their mechanical and optical properties. view less
Request Sample AEROSIL® R 816 Evonik Resource Efficiency GmbH, BL Coating Additives AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed...view more AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed dry feel. AEROSIL® R 816 is PCPC-listed as 'Silica cetyl silylate'. view less
Request Sample AEROSIL® R 9200 Evonik Resource Efficiency GmbH, BL Coating Additives AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. It can be used in paints and coatings, silicone rubber, and free flow applications. AEROSIL® R 9200 improves the scratch resistance of paints and coatings. It's low rheological effect and ...view more AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. It can be used in paints and coatings, silicone rubber, and free flow applications. AEROSIL® R 9200 improves the scratch resistance of paints and coatings. It's low rheological effect and excellent processability enables high loading levels of polymer systems. It also is an effective free flow agent for fine powders, easily to incorporate, does not form agglomerates, allows short mixing time, and gentle mixing conditions. view less
Request Sample AEROSIL® R 972 Evonik Resource Efficiency GmbH, BL Coating Additives A hydrophobic fumed silica aftertreated with dimethyldichlorosilane based on a hydrophilic fumed silica with a specific surface area of 130 m²/g.
Request Sample AEROXIDE® ALU 130 Evonik Resource Efficiency GmbH, BL Coating Additives AEROXIDE® Alu 130 is a fumed aluminium oxide developed according to the AEROSIL® process. Physico-chemical properties include a positive surface charge and a BET surface area of 130 m²/g suitable for a wide range of applications.
Request Sample AEROXIDE® ALU C Evonik Resource Efficiency GmbH, BL Coating Additives AEROXIDE® ALU C is a very fine fumed metal oxide with a high specific surface area. Due to the electropositive chargability, this product leads to specific properties in various applications. It is used in PET-films as an anti-blocking agent and in fluore...view more AEROXIDE® ALU C is a very fine fumed metal oxide with a high specific surface area. Due to the electropositive chargability, this product leads to specific properties in various applications. It is used in PET-films as an anti-blocking agent and in fluorescent tubes and light bulbs as an additive for a homogenous light emission and better flowability of the the flourescent mix during the electrostatic coating .AEROXIDE® ALU C is also used in powder coatings to improve chargeabiltiy and in coatings of high quality ink-jet-paper to provide high gloss and excellent printing. view less
Request Sample AIRASE® 4655 Evonik Resource Efficiency GmbH, BL Coating Additives AIRASE® 4655 is a compatible defoamer concentrate based on organic polymer technology. Suitable for food contact compliant formulations.
Request Sample AIRASE® 5655 Evonik Resource Efficiency GmbH, BL Coating Additives AIRASE® 5655 is a very compatible defoamer concentrate based on polyether siloxane technology.
Request Sample ALBIDUR® 1223 Evonik Resource Efficiency GmbH, BL Coating Additives ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content.
Request Sample ALBIDUR® EP 2240 A Evonik Resource Efficiency GmbH, BL Coating Additives ALBIDUR® EP 2240 A is a white liquid, reactive resin modifier. This product is used in the primer, filler, and top coat for solventborne and solvent-free 2-pack epoxy formulations. It has high compatibility with aromatic epoxy resins, as well as Increased...view more ALBIDUR® EP 2240 A is a white liquid, reactive resin modifier. This product is used in the primer, filler, and top coat for solventborne and solvent-free 2-pack epoxy formulations. It has high compatibility with aromatic epoxy resins, as well as Increased tear resistance and impact resistance. It has good preservation of network density and chemical resistance. ALBIDUR® EP 2240 A reduces cure shrinkage, improves dirt shedding, and has barrier properties against water and diluted acids. view less
Request Sample ALBIDUR® PU 5640 Evonik Resource Efficiency GmbH, BL Coating Additives ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good prese...view more ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids. view less
Request Sample ANCAMIDE® 220-X-70 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete.
Request Sample ANCAREZ® AR555 Waterborne Epoxy Resin Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...view more ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. view less
Request Sample AQUA PASTE® 055-C33 Univar Solutions (formerly Nexeo Solutions) AQUA PASTE® 055-C33 is a passivated aluminum paste comprised of a coarse particle size, non-leafing lenticular flake that provides excellent brightness.
Request Sample AQUACER 8075 Univar Solutions (formerly Nexeo Solutions) AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio o...view more AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8075 is compatible with all known polymer dispersions and plasticizers. view less
Request Sample AQUACER 8976 Univar Solutions (formerly Nexeo Solutions) AQUACER 8976 improves buffability, increases filling capacity and produces a strong anti-slip effect. The above mentioned properties are generated by mixing AQUACER 8976 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 i...view more AQUACER 8976 improves buffability, increases filling capacity and produces a strong anti-slip effect. The above mentioned properties are generated by mixing AQUACER 8976 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8976 is compatible with all known polymer dispersions and plasticizers. view less
Request Sample AQUASIL® BP 3500 Inhibited Aluminum Pigment Univar Solutions (formerly Nexeo Solutions) AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used wi...view more AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used with chromatic pigments to produce colored metallic effects. view less
Request Sample AQUAVEX® L Premier 021 Aluminium Pigment Univar Solutions (formerly Nexeo Solutions) AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is esse...view more AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. view less
Request Sample AQUAVEX® NL 010 Aluminium Pigment Univar Solutions (formerly Nexeo Solutions) AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially ...view more AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. view less
Request Sample AQUAVEX® NL 013 Aluminium Pigment Univar Solutions (formerly Nexeo Solutions) AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of...view more AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. view less
Request Sample AQUAVEX® NL 028 Aluminium Pigment Univar Solutions (formerly Nexeo Solutions) AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially...view more AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. view less
Request Sample Acrylamide Solid Kowa American Corp/ San Esters Corp. Acrylamide Solid is a white crystal powder.
Request Sample Acrylic Acid, Glacial Univar Solutions (formerly Nexeo Solutions) This is glacial acrylic acid.
Request Sample Acrylol Chloride Kowa American Corp/ San Esters Corp. Acrylol Chloride is a clear liquid.
Request Sample Airase® 4500 Defoamer Evonik Resource Efficiency GmbH, BL Coating Additives Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils,...view more Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils, hazardous air pollutants (HAPs), or alkyl phenol ethoxylates (APEs). view less
Request Sample Airase® 5100 Defoamer Evonik Resource Efficiency GmbH, BL Coating Additives Airase® 5100 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of a line of products that spans the application space from strong defoaming to high compatibility. Airase® 5100 Defoamer is the strongest defoamer of the SSDL defoame...view more Airase® 5100 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of a line of products that spans the application space from strong defoaming to high compatibility. Airase® 5100 Defoamer is the strongest defoamer of the SSDL defoamers offered by Air Products. Airase® 5100 Defoamer is a formulated product that contains no added solvent, HAPs, or alkylphenol ethoxylates. This siloxane-based defoamer was developed for use in a wide range of water-based applications. Airase® 5100 Defoamer is best incorporated with high shear mixing. It is designed for applications where strong defoaming is required and the formulations are not sensitive to cratering. When properly incorporated, Airase® 5100 Defoamer can provide excellent long-term, persistent defoaming in formulations. view less
Request Sample Airase® 5200 Defoamer Evonik Resource Efficiency GmbH, BL Coating Additives Airase® 5200 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of a line of products that spans the application space from strong defoaming to high compatibility. Airase® 5200 Defoamer is the second strongest defoamer of the SSDL ...view more Airase® 5200 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of a line of products that spans the application space from strong defoaming to high compatibility. Airase® 5200 Defoamer is the second strongest defoamer of the SSDL defoamers offered by Air Products, and is best incorporated with high shear mixing. Airase® 5200 Defoamer is a formulated product that contains no added solvent, hazardous air pollutants (HAPs) or alkylphenol ethoxylates (APEs). This siloxane-based defoamer was developed for use in a wide range of water-based applications. It is designed for applications where strong defoaming is required and the formulations are not particularly sensitive to cratering. When properly incorporated, Airase® 5200 Defoamer can provide excellent long-term, persistent defoaming in formulations. It offers better film compatbility than Airase® 5100 Defoamer. view less