UL Prospector

Success!

Successfully saved your search
PEL-LOK™ L61 Ele Corporation PEL-LOK™ L61 is a block polymer consisting of a modest amount of polyethylene glycol reacted with a larger polypropylene glycol polymer, giving it a lower HLB. This polymer has terminal primary hydroxyl groups. It is used as a defoamer, emulsifier, disper...view more PEL-LOK™ L61 is a block polymer consisting of a modest amount of polyethylene glycol reacted with a larger polypropylene glycol polymer, giving it a lower HLB. This polymer has terminal primary hydroxyl groups. It is used as a defoamer, emulsifier, dispersant, stabilizer, wetting agent and boundry lubricant for metalworking fluids, cosmetics, paper, textiles, dishwashing detergents, rinse aids and lubricant bases. view less
PEL-LOK™ L64 Ele Corporation PEL-LOK™ L64 is Elé’s brand of Poloxamer 184. It is a normal, as opposed to reverse, EO/PO block copolymer surfactant with terminal primary hydroxyl groups. It is 100% active, has a molecular weight of approximately 2900 Daltons and is relatively nontoxic...view more PEL-LOK™ L64 is Elé’s brand of Poloxamer 184. It is a normal, as opposed to reverse, EO/PO block copolymer surfactant with terminal primary hydroxyl groups. It is 100% active, has a molecular weight of approximately 2900 Daltons and is relatively nontoxic. PEL-LOK™ L64 is a liquid at typical ambient temperatures. It has a higher HLB and is soluble in water at room temperature. view less
PEL-LUBE™ 120 Ele Corporation PEL-LUBE™ 120 is a water insoluble PAG-Phosphate ester blend. It is a water-dispersible extreme pressure agent used in cutting fluids with some ferrous and non-ferrous corrosion inhibition properties.
PEL-LUBE™ 486-C Ele Corporation PEL-LUBE™ 486-C is a lubricity additive for water-based metalworking fluids which gives extreme pressure lubricity without the use of phosphorus, sulfur, chlorine or fatty acid compounds. PEL-LUBE 486-C is stable under a variety of conditions, including v...view more PEL-LUBE™ 486-C is a lubricity additive for water-based metalworking fluids which gives extreme pressure lubricity without the use of phosphorus, sulfur, chlorine or fatty acid compounds. PEL-LUBE 486-C is stable under a variety of conditions, including very hard water, and does not foam. It should be neutralized 50:50 with MEA, DEA or TEA prior to formulating. view less
PEL-LUBE™ 510 Ele Corporation PEL-LUBE™ 510 is a blend of a water soluble polyalkylene glycol (PAG) and an extreme pressure lubricant (EP) with hydrotrope properties. At the temperatures generated by cutting metal, the PAG’s solubility is reduced and it forms a thin film on the metal ...view more PEL-LUBE™ 510 is a blend of a water soluble polyalkylene glycol (PAG) and an extreme pressure lubricant (EP) with hydrotrope properties. At the temperatures generated by cutting metal, the PAG’s solubility is reduced and it forms a thin film on the metal part. At the same time, the EP lube serves to protect the metal by reacting with the surface, generating plate-like structures that lubricate in a fashion similar to graphite. view less
PEL-LUBE™ 562 Ele Corporation PEL-LUBE™ 562 is a lubricant and antiwear agent for metalworking fluids, straight oils, sol. oils, and semisynthetic fluids. It provides boundary lubrication for metal removal and metal forming. In addition, it yields some corrosion resistance for ferrous...view more PEL-LUBE™ 562 is a lubricant and antiwear agent for metalworking fluids, straight oils, sol. oils, and semisynthetic fluids. It provides boundary lubrication for metal removal and metal forming. In addition, it yields some corrosion resistance for ferrous and nonferrous metals. Additionally, it is an emulsifier for aqueous formulations. view less
PEL-LUBE™ 591 Ele Corporation PEL-LUBE™ 591 metalworking lubricant is a polyalkylene glycol formulated with an EP phosphate ester. It provides both hydrodynamic and extreme pressure lubrication. PEL-LUBE™ 591 is completely water soluble at ambient temperatures. At elevated temperature...view more PEL-LUBE™ 591 metalworking lubricant is a polyalkylene glycol formulated with an EP phosphate ester. It provides both hydrodynamic and extreme pressure lubrication. PEL-LUBE™ 591 is completely water soluble at ambient temperatures. At elevated temperatures it exhibits inverse solubility and is thus able to provide excellent lubricity at low aqueous concentrations. When PEL-LUBE™ 591 is compounded with alkanolamines, corrosion inhibitors, and biocides, synthetic coolants of exceptional performance and versatility can be produced. It is hydrolytically stable and resists microbial attack. view less
PEL-LUBE™ 593 Ele Corporation PEL-LUBE™ 593 is an emulsifier specifically designed for semi-synthetic metalworking fluids. It provides boundary lubrication and is stable in a variety of conditions, including in very hard water. PEL-LUBE™ 593 is not a formulated product. Formulations u...view more PEL-LUBE™ 593 is an emulsifier specifically designed for semi-synthetic metalworking fluids. It provides boundary lubrication and is stable in a variety of conditions, including in very hard water. PEL-LUBE™ 593 is not a formulated product. Formulations utilizing it ought to be fortified with corrosion inhibitors and other additives to get optimum performance. view less
PEL-LUBE™ EPML-483 Ele Corporation PEL-LUBE™ EPML-483 metalworking lubricant is an anionic modified polyalkylene glycol which provides both hydrodynamic and extreme pressure lubrication. PEL-LUBE™ EPML-483 is completely water soluble at ambient temperatures. At elevated temperatures it exh...view more PEL-LUBE™ EPML-483 metalworking lubricant is an anionic modified polyalkylene glycol which provides both hydrodynamic and extreme pressure lubrication. PEL-LUBE™ EPML-483 is completely water soluble at ambient temperatures. At elevated temperatures it exhibits inverse solubility and is thus able to provide excellent lubricity at low concentrations in water. view less
PEL-LUBE™ EPML-X Ele Corporation PEL-LUBE™ EPML-X is a mixture of alkanolamine and anionic polymers. It is a water-soluble, low-foaming lubricant which provides hydrodynamic extreme pressure lubrication and ferrous corrosion inhibition properties.
PEL-PAG™ 967 Ele Corporation PEL-PAG™ 967 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 150 cSt at 37.8° C.
PEL-PAG™ 968 Ele Corporation PEL-PAG™ 968 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 220 cSt at 37.8° C.
PEL-PAG™ WI-1145 Ele Corporation PEL-PAG™ WI-1145 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for ...view more PEL-PAG™ WI-1145 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 1087-1203 at 100° F, SUS. view less
PEL-PAG™ WI-135 Ele Corporation PEL-PAG™ WI-135 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...view more PEL-PAG™ WI-135 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 128-142 at 100° F, SUS. view less
PEL-PAG™ WI-165 Ele Corporation PEL-PAG™ WI-165 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...view more PEL-PAG™ WI-165 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 156-174 at 100° F, SUS. view less
PEL-PAG™ WI-1715 Ele Corporation PEL-PAG™ WI-1715 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for ...view more PEL-PAG™ WI-1715 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 1629-1801 at 100° F, SUS. view less
PEL-PAG™ WI-200 Ele Corporation PEL-PAG™ WI-200 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...view more PEL-PAG™ WI-200 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 180-220 at 100° F, SUS. view less
PEL-PAG™ WI-250 Ele Corporation PEL-PAG™ WI-250 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...view more PEL-PAG™ WI-250 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 237-263 at 100° F, SUS. view less
PEL-PAG™ WI-285 Ele Corporation PEL-PAG™ WI-285 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...view more PEL-PAG™ WI-285 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 270-300 at 100° F, SUS. view less
PEL-PAG™ WI-525 Ele Corporation PEL-PAG™ WI-525 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...view more PEL-PAG™ WI-525 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 498-552 at 100° F, SUS. view less
PEL-PAG™ WI-625 Ele Corporation PEL-PAG™ WI-625 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...view more PEL-PAG™ WI-625 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 595-655 at 100° F, SUS. view less
PEL-PAG™ WI-65 Ele Corporation PEL-PAG™ WI-65 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for te...view more PEL-PAG™ WI-65 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 61-69 at 100° F, SUS. view less
PEL-PAG™ WS-1281 Ele Corporation PEL-PAG™ WS-1281 is a medium viscosity, water-soluble synthetic lubricant. Aqueous solutions of PEL-PAG™ 1076 are lower-foaming than most other water soluble PAGs. It is 100% active with no diluents, hydrolytically stable and hard water stable. This produ...view more PEL-PAG™ WS-1281 is a medium viscosity, water-soluble synthetic lubricant. Aqueous solutions of PEL-PAG™ 1076 are lower-foaming than most other water soluble PAGs. It is 100% active with no diluents, hydrolytically stable and hard water stable. This product is non-staining to brass, copper and aluminum. PEL-PAG™ WS-1281 is useful as a lubricity additive in the formulation of synthetic coolants used in low temperature metal working operations such as can-drawing, stamping and cold rolling. It may be formulated with anionic EP additives such as carboxylates and phosphate esters. view less
PEL-PAG™ WS-2000 Ele Corporation PEL-PAG™ WS-2000 is butanol, ethoxylated and propoxylated. It is a water-soluble functional fluid. This product has a viscosity of 432 cSt at 37.8° C.
PEL-PAG™ WS-423 Ele Corporation PEL-PAG™ WS-423 is a functional fluid designed with a low cloud point. It is used as a food grade defoamer for the extraction and processing of sucrose from sugar beets. This product is a water-soluble, non-silicone defoamer and boundary lubricant with a ...view more PEL-PAG™ WS-423 is a functional fluid designed with a low cloud point. It is used as a food grade defoamer for the extraction and processing of sucrose from sugar beets. This product is a water-soluble, non-silicone defoamer and boundary lubricant with a cloud point of 20˚C. view less
PEL-PAG™ WS-450 Ele Corporation PEL-PAG™ WS-450 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 98 cSt at 37.8° C.
PEL-PAG™ WS-5100 Ele Corporation PEL-PAG™ WS-5100 is a water-soluble polyalkylene glycol that is 100% active. It is useful in personal care products, metalworking fluids, hydraulic fluids and lubricants. This product can be formulated with water and additives to obtain effective fluids f...view more PEL-PAG™ WS-5100 is a water-soluble polyalkylene glycol that is 100% active. It is useful in personal care products, metalworking fluids, hydraulic fluids and lubricants. This product can be formulated with water and additives to obtain effective fluids for a variety of metalworking operations, cutting, drawing, stamping rolling and more. PEL-PAG™ WS-5100 can be used neat as hydraulic fluids for boundary lubrication and low temperature applications or formulated with water and additives for corrosion and wear protection. When properly formulated, PEL-PAG™ WS-5100 is useful in hair grooming products and shampoos, it is an excellent high temperature, compressor gear, textile fiber, mill and calendar lubricant. view less
PEL-PAG™ WS-5300 Ele Corporation PEL-PAG™ WS-5300 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 1050 cSt at 37.8° C.
PEL-PAG™ WS-55 Ele Corporation PEL-PAG™ WS-55 is a water-soluble polyalkylene glycol that is 100% active with no diluents. It is a useful, relatively nonvolatile solvent for many industrial applications. It also has lubricating properties. PEL-PAG™ WS-55 can be formulated with water an...view more PEL-PAG™ WS-55 is a water-soluble polyalkylene glycol that is 100% active with no diluents. It is a useful, relatively nonvolatile solvent for many industrial applications. It also has lubricating properties. PEL-PAG™ WS-55 can be formulated with water and additives to obtain effective formulations for a variety of purposes. view less
PEL-PAG™ WS-660 Ele Corporation PEL-PAG™ WS-660 is a water-soluble polyalkylene glycol that is 100% active with no diluents. It is useful in metalworking fluids, hydraulic fluids and lubricants. This product is 100% active with no diluents; it can be formulated with water and additives ...view more PEL-PAG™ WS-660 is a water-soluble polyalkylene glycol that is 100% active with no diluents. It is useful in metalworking fluids, hydraulic fluids and lubricants. This product is 100% active with no diluents; it can be formulated with water and additives to obtain effective fluids for a variety of metalworking operations, cutting, drawing, stamping rolling and more. PEL-PAG™ WS-660 can be used neat as hydraulic fluids for boundary lubrication and low temperature applications or formulated with water and additives for corrosion and wear protection. When properly formulated, PEL-PAG™ WS-660 is an excellent high temperature, compressor gear, rubber, textile fiber, mill and calendar lubricant. view less
PEL-PAG™ WS-9500 Ele Corporation PEL-PAG™ WS-9500 is a water-soluble polyalkylene glycol that is 100% active with no diluents. This polymer has two terminal hydroxyls and is an adduct consisting of a random mixture of 75% ethylene oxide and 25% propylene oxide. It is useful in personal c...view more PEL-PAG™ WS-9500 is a water-soluble polyalkylene glycol that is 100% active with no diluents. This polymer has two terminal hydroxyls and is an adduct consisting of a random mixture of 75% ethylene oxide and 25% propylene oxide. It is useful in personal care products, metalworking fluids, hydraulic fluids and lubricants. PEL-PAG™ WS-9500 can be formulated with water and additives to obtain effective fluids for a variety of metalworking operations, cutting, drawing, stamping rolling and more. PEL-PAG™ WS-9500 can be used neat as hydraulic fluids for boundary lubrication and low temperature applications or formulated with water and additives for corrosion and wear protection. When properly formulated, PEL-PAG™ WS-9500 is useful in hair grooming products, is an excellent high temperature, compressor gear, textile fiber, mill and calendar lubricant. view less
PEL-PHEN™ 649 Ele Corporation PEL-PHEN™ 649 is ethoxylated meta- and para-cresol with 2 moles of ethylene oxide. It is useful for the production of phosphate ester surfactants and hydrotropes.
PEL-PHEN™ 650 Ele Corporation PEL-PHEN™ 650 is a nonionic surfactant designed for use in the electroplating industry where it is used to formulate brightener additives. It is particularly effective as an auxiliary brightener in acid zinc electrolytes for increasing the throwing power ...view more PEL-PHEN™ 650 is a nonionic surfactant designed for use in the electroplating industry where it is used to formulate brightener additives. It is particularly effective as an auxiliary brightener in acid zinc electrolytes for increasing the throwing power and improving ductility. PEL-PHEN™ 650 is also be used to solubilize top brighteners. Typical use levels range from 2 to 6 grams per liter. view less
PEL-PHOS™ 1009 Ele Corporation PEL-PHOS™ 1009 is a lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, detergent and a dispersant for metal working formulations. It is useful in lubricating and rolling oils, hydraulic and water-based cutting fluids. PEL-PHOS™...view more PEL-PHOS™ 1009 is a lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, detergent and a dispersant for metal working formulations. It is useful in lubricating and rolling oils, hydraulic and water-based cutting fluids. PEL-PHOS™ 1009 is biodegradable with a low toxicity profile. view less
PEL-PHOS™ 1049 Ele Corporation PEL-PHOS™ 1049 is a phosphate ester of ethoxylated isotridecyl alcohol. It is useful as an emulsifier for water based cutting fluids where it also exhibits some extreme pressure lubrication. Upon neutralization with alkali or amines, it is a useful emulsi...view more PEL-PHOS™ 1049 is a phosphate ester of ethoxylated isotridecyl alcohol. It is useful as an emulsifier for water based cutting fluids where it also exhibits some extreme pressure lubrication. Upon neutralization with alkali or amines, it is a useful emulsifier for emulsion polymerization. view less
PEL-PHOS™ 444 Ele Corporation PEL-PHOS™ 444 is dinonylphenol, ethoxylated and phosphated. It is an EP agent used as a co-emulsifier for oil-based cutting fluids with some ferrous and non-ferrous corrosion inhibition properties.
PEL-PHOS™ 583 Ele Corporation PEL-PHOS™ 583 is a water soluble phosphate ester that exhibits both hydrotrope and detergent properties. It is an ideal ingredient for coupling nonionics into moderately built, alkaline detergent systems. It finds particular use for metal cleaning. It is ...view more PEL-PHOS™ 583 is a water soluble phosphate ester that exhibits both hydrotrope and detergent properties. It is an ideal ingredient for coupling nonionics into moderately built, alkaline detergent systems. It finds particular use for metal cleaning. It is compatible with the typical builders used including pyrophosphates, silicates, and carbonates. view less
PEL-PHOS™ 884 Ele Corporation PEL-PHOS™ 884 is an oil soluble phosphate ester in the acid form and an extreme pressure additive. Unneutralized, it is insoluble in water but upon neutralization with a water soluble amine, it becomes water soluble and acts as a co-emulsifier for oils an...view more PEL-PHOS™ 884 is an oil soluble phosphate ester in the acid form and an extreme pressure additive. Unneutralized, it is insoluble in water but upon neutralization with a water soluble amine, it becomes water soluble and acts as a co-emulsifier for oils and semisynthetic fluids. It is an excellent emulsifier for water-insoluble polyalkylene glycols. PEL-PHOS™ 884 can be used to make microemulsion metal working fluids that are totally synthetic and free from both petroleum and vegetable oils. view less
PEL-PHOS™ 885-A Ele Corporation PEL-PHOS™ 885-A is a water soluble, phosphorous-containing, extreme pressure agent that will improve water-based metal working fluid lubrication. This product is provided in free acid form. It imparts enhanced lubricity to aqueous based metalworking fluid...view more PEL-PHOS™ 885-A is a water soluble, phosphorous-containing, extreme pressure agent that will improve water-based metal working fluid lubrication. This product is provided in free acid form. It imparts enhanced lubricity to aqueous based metalworking fluid formulations. PEL-PHOS 885 may be used as is or neutralized with a water soluble amine such as triethanolamine. view less
PEL-PHOS™ H-66 Ele Corporation PEL-PHOS™ H-66 is an aqueous solution of the potassium salt of a high HLB phosphate ester. It functions as a hydrotrope to couple lower HLB surfactants into “built” formulations or aqueous solutions of electrolytes. As a phosphate ester salt, PEL-PHOS™ H-...view more PEL-PHOS™ H-66 is an aqueous solution of the potassium salt of a high HLB phosphate ester. It functions as a hydrotrope to couple lower HLB surfactants into “built” formulations or aqueous solutions of electrolytes. As a phosphate ester salt, PEL-PHOS™ H-66 is an anionic surfactant. view less
PEL-PHOS™ LB-400 Ele Corporation PEL-PHOS™ LB-400 is a lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, detergent and a dispersant for metal working formulations. It is useful in lubricating and rolling oils, hydraulic and water-based cutting fluids. PEL-PHO...view more PEL-PHOS™ LB-400 is a lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, detergent and a dispersant for metal working formulations. It is useful in lubricating and rolling oils, hydraulic and water-based cutting fluids. PEL-PHOS™ LB-400 is both biodegradable and a non-ecotoxic surfactant. view less
PEL-PHOS™ LK-500 Ele Corporation PEL-PHOS™ LK-500 is a phosphate ester based on 1-hexanol ethoxylate. It is soluble in water and polar solvents. PEL-PHOS™ LK-500 is a rust inhibitor, emulsifier and EP agent for synthetic metal working fluids.
PEL-PHOS™ LM-400 Ele Corporation PEL-PHOS™ LM-400 is a phosphate ester based on dinonylphenol ethoxylate. It is the most oil soluble of the series and is provided in free acid form. When neutralized with an amine, it is a useful emulsifier and lubricant for metal working formulations. PE...view more PEL-PHOS™ LM-400 is a phosphate ester based on dinonylphenol ethoxylate. It is the most oil soluble of the series and is provided in free acid form. When neutralized with an amine, it is a useful emulsifier and lubricant for metal working formulations. PEL-PHOS™ LM-400 is also an effective emulsifier for emulsion polymerization reactions. view less
PEL-PHOS™ LP-300 Ele Corporation PEL-PHOS™ LP-300 is a low-foaming aromatic phosphate ester with hydrotrope properties. It is a highly efficient agent for coupling nonionic surfactants into built hard surface cleaners. It is useful for cleaning formulations intended for metal & bottlewas...view more PEL-PHOS™ LP-300 is a low-foaming aromatic phosphate ester with hydrotrope properties. It is a highly efficient agent for coupling nonionic surfactants into built hard surface cleaners. It is useful for cleaning formulations intended for metal & bottlewashing. When incorporated into metal cutting formulations, PEL-PHOS™ LP-300 provides extreme pressure lubricity due to its phosphate functionality. view less
PEL-PHOS™ LP-700 Ele Corporation PEL-PHOS™ LP-700 is a phosphate ester of ethoxylated phenol. It is an exceptionally effective extreme pressure lubricant for metal working formulations. It also functions as a corrosion inhibitor and as a hydrotrope in detergent preparations.
PEL-PPG™ 2000 Ele Corporation PEL-PPG™ 2000 is a homopolymer of propylene oxide that has a number average molecular weight of 2000 Daltons and is terminated with secondary hydroxyls. It is essentially water insoluble but is easily emulsified with a minimal amount of surfactants to pre...view more PEL-PPG™ 2000 is a homopolymer of propylene oxide that has a number average molecular weight of 2000 Daltons and is terminated with secondary hydroxyls. It is essentially water insoluble but is easily emulsified with a minimal amount of surfactants to prepare a boundary lubricant emulsion. view less
PEL-QUAD™ 90R4 Ele Corporation PEL-QUAD™ 90R4 is a 100% active, tetrafunctional block copolymer surfactant. It has terminal secondary hydroxyl groups which lessen the amount of foam that it generates in aqueous solution. It functions as an anti-foaming agent, dispersant and emulsifier.
PEL-QUAD™ T-702 Ele Corporation PEL-QUAD™ T-702 is a tetrafunctional block copolymer surfactant based on a polyoxyethylene terminated, propylene oxide adduct of ethylenediamine. It is a 100% active nonionic surfactant that is fairly nontoxic. This product functions as an anti-foaming ag...view more PEL-QUAD™ T-702 is a tetrafunctional block copolymer surfactant based on a polyoxyethylene terminated, propylene oxide adduct of ethylenediamine. It is a 100% active nonionic surfactant that is fairly nontoxic. This product functions as an anti-foaming agent, wetting agent, dispersant and emulsifier. In addition it offers the formulator lubricating properties. view less
PEL-ROK™ 17R1 Ele Corporation PEL-ROK™ 17R1 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 2000 Daltons and consists of approximately 15% ethylene oxide and 85% propylene oxide....view more PEL-ROK™ 17R1 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 2000 Daltons and consists of approximately 15% ethylene oxide and 85% propylene oxide. PEL-ROK™ 17R1 is a liquid at typical ambient temperatures. It has a fairly low HLB but is soluble in water at room temperature. view less
PEL-ROK™ 17R2 Ele Corporation PEL-ROK™ 17R2 is polyethylene glycol, propoxylated. It is a water-soluble, low-foaming block copolymer surfactant used in synthetic C&G fluids.
PEL-ROK™ 17R4 Ele Corporation PEL-ROK™ 17R4 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 2650 Daltons and is composed of approximately 45% ethylene oxide and 55% propylene oxi...view more PEL-ROK™ 17R4 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 2650 Daltons and is composed of approximately 45% ethylene oxide and 55% propylene oxide. PEL-ROK™ 17R4 is a liquid at typical ambient temperatures. It has an HLB of to 7 to 12 and is soluble in water at room temperature. view less
PEL-ROK™ 25R2 Ele Corporation PEL-ROK™ 25R2 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 3100 Daltons and is relatively nontoxic. PEL-ROK™ 25R2 is a liquid at typical ambient ...view more PEL-ROK™ 25R2 is a block copolymer surfactant with terminal secondary hydroxyl groups, rendering it a lower foamer. It is 100% active, has a molecular weight of approx. 3100 Daltons and is relatively nontoxic. PEL-ROK™ 25R2 is a liquid at typical ambient temperatures. It has an HLB of 1 to 7 and is soluble in water at lower temperatures. view less
PEL-ROK™ 31R1 Ele Corporation PEL-ROK™ 31R1 is an effective low-foam, nonionic wetting agent. It is useful as a rinse aid for auto dish washing and as an industrial wetting agent. It is a nonionic block copolymer surfactant with terminal secondary hydroxyl groups. The average molecula...view more PEL-ROK™ 31R1 is an effective low-foam, nonionic wetting agent. It is useful as a rinse aid for auto dish washing and as an industrial wetting agent. It is a nonionic block copolymer surfactant with terminal secondary hydroxyl groups. The average molecular weight of this product is 3250 Daltons and it consists of approximately 15% ethylene oxide and 85% propylene oxide. PEL-ROK™ 31R1 is low foaming as compared with other nonionic surfactants. view less
PEL-RON™ 219-A Ele Corporation PEL-RON™ 219-A is a technical grade of 2,4-Imidazolidinedione,1,3-bis (hydroxymethyl)-5,5-dimethyl-. It is sold as a 55% active, aqueous solution. This product may crystallize if exposed to freezing temperatures, thus freeze protection is warranted during...view more PEL-RON™ 219-A is a technical grade of 2,4-Imidazolidinedione,1,3-bis (hydroxymethyl)-5,5-dimethyl-. It is sold as a 55% active, aqueous solution. This product may crystallize if exposed to freezing temperatures, thus freeze protection is warranted during storage and processing. This product is used as an odor-control agent. view less
PEL-RON™ 822 Ele Corporation PEL-RON™ 822 is a unique copper complex that works synergistically with biocidal agents in metal working fluids. It can help to reduce the usual dose of biocide required. For example, the level of isothiazolinone biocide required can be reduced by up to 2...view more PEL-RON™ 822 is a unique copper complex that works synergistically with biocidal agents in metal working fluids. It can help to reduce the usual dose of biocide required. For example, the level of isothiazolinone biocide required can be reduced by up to 20% when formulated with PEL-RON™ 822. It will often eliminate and prevent recurrence of most coolant borne odors such as that of hydrogen sulfide from sulfur reducing bacteria. view less
PENTAERYTHRITOL NCeed Enterprises This material is shipped in 50lb bags.
PETRONATE H Sonneborn It is an all-natural medium molecular weight first intent sodium sulfonate. It is recommended for use in soluble oils and semi-synthetic fluids to impart all of the benefits of natural sodium sulfonate
PETRONATE HL Sonneborn It is an all-natural medium molecular weight first intent sodium sulfonate. It is recommended for use in soluble oils and semi-synthetic fluids to impart all of the benefits of natural sodium sulfonate
PETRONATE HL/L Sonneborn It is an all natural low molecular weight first intent sodium sulfonate. It is recommended for use in soluble oils and semi synthetic fluids to impart all of the benefits of natural sodium sulfonate
PIB 10 Braskem S.A. PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer.
PIB 122 Braskem S.A. PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer.
PIB 128 Braskem S.A. PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer.
PIB 16 Braskem S.A. PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins.
PIB 24 Braskem S.A. PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer.
PIB 240 Braskem S.A. PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer.
PIB 30 Braskem S.A. PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer.
PIB 32 Braskem S.A. PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer.
PIB 4 Braskem S.A. PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer.
PIB 6 Braskem S.A. PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer.
PIB 8 Braskem S.A. PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer.
Request Sample PIBSA 1000HR Univar Solutions PIBSA 1000HR is reacted from 1000 molecular weight highly reactive polyisobutylene. PIBSA 1000HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...view more PIBSA 1000HR is reacted from 1000 molecular weight highly reactive polyisobutylene. PIBSA 1000HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
Request Sample PIBSA 1300HR Univar Solutions PIBSA 1300HR is reacted from 1300 molecular weight highly reactive polyisobutylene. PIBSA 1300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...view more PIBSA 1300HR is reacted from 1300 molecular weight highly reactive polyisobutylene. PIBSA 1300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
Request Sample PIBSA 2300HR Univar Solutions PIBSA 2300HR is reacted from 2300 molecular weight highly reactive polyisobutylene. PIBSA 2300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...view more PIBSA 2300HR is reacted from 2300 molecular weight highly reactive polyisobutylene. PIBSA 2300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
Request Sample PIBSA 450HR Univar Solutions PIBSA 450HR is reacted from 450 molecular weight highly reactive polyisobutylene. PIBSA 450HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfact...view more PIBSA 450HR is reacted from 450 molecular weight highly reactive polyisobutylene. PIBSA 450HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
Request Sample PIBSA 750HR Univar Solutions PIBSA 750HR is reacted from 750 molecular weight highly reactive polyisobutylene. PIBSA 750HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfact...view more PIBSA 750HR is reacted from 750 molecular weight highly reactive polyisobutylene. PIBSA 750HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
Request Sample PIBSI E1 1.0 Univar Solutions PIBSI E1 1.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.0%. PIBSI E1 1.0 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI E1 1.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.0%. PIBSI E1 1.0 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI E1 1.0 have common applications in a broad range of fuel and lubricants. view less
Request Sample PIBSI E1 1.2 Univar Solutions PIBSI E1 1.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.2%. PIBSI E1 1.2 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI E1 1.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.2%. PIBSI E1 1.2 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI E1 1.2 have common applications in a broad range of fuel and lubricants. view less
Request Sample PIBSI F1 2.0 Univar Solutions PIBSI F1 2.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 2.0%. PIBSI F1 2.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI F1 2.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 2.0%. PIBSI F1 2.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 2.0 have common applications in a broad range of fuel and lubricants. view less
Request Sample PIBSI F1 3.2 Univar Solutions PIBSI F1 3.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.2%. PIBSI F1 3.2 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI F1 3.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.2%. PIBSI F1 3.2 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 3.2 have common applications in a broad range of fuel and lubricants. view less
Request Sample PIBSI F1 3.9 Univar Solutions PIBSI F1 3.9 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.9%. PIBSI F1 3.9 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI F1 3.9 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.9%. PIBSI F1 3.9 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 3.9 have common applications in a broad range of fuel and lubricants. view less
Request Sample PIBSI F2 5.0 Univar Solutions PIBSI F2 5.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 5.0%. PIBSI F2 5.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI F2 5.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 5.0%. PIBSI F2 5.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F2 5.0 have common applications in a broad range of fuel and lubricants. view less
Request Sample PLURODAC 44 Sasol Chemicals PLURODAC 44 is based on a central polypropylene glycol chain extended with polyethylene glycol at both ends.
Request Sample PLURODAC 64 Sasol Chemicals PLURODAC 64 is based on a central polypropylene glycol chain extended with polyethylene glycol at both ends.
Request Sample PLURODAC F-88 Sasol Chemicals PLURODAC F-88 is based on a central polypropylene glycol chain extended with polyethylene glycol at both ends.
Request Sample PLURODAC F68-SC Sasol Chemicals PLURODAC F-68 is based on a central polypropylene glycol chain extended with polyethylene glycol at both ends
POLYGLYCOL DIACID 600 AMRI Global POLYGLYCOL DIACID 600 is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high b...view more POLYGLYCOL DIACID 600 is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. view less
PRIME BURNING LARD OIL Dover Chemical Corporation - Lubricant Additives Lubricity Additives
Petronate HH Sonneborn Petronate HH is an all-natural high molecular weight first intent sodium sulfonate. It is recommended for use in soluble oils and semi-synthetic fluids to impart all of the benefits of natural sodium sulfonate.
Petronate L Sonneborn Petronate L is an all-natural low molecular weight first intent sodium sulfonate. It is recommended for use in soluble oils and semi-synthetic fluids to impart all of the benefits of natural sodium sulfonate and exhibits improved emulsion properties compa...view more Petronate L is an all-natural low molecular weight first intent sodium sulfonate. It is recommended for use in soluble oils and semi-synthetic fluids to impart all of the benefits of natural sodium sulfonate and exhibits improved emulsion properties compared to commercially available synthetic products. Nominal dosages would range from 1.0 to 10.0 wt. % of the finished soluble oil or semi-synthetic fluid. Petronate L is compatible with most mineral base oils, white oils, and synthetic basestocks. view less
Request Sample Phosphetal OAX Zschimmer & Schwarz USA (Lexolube group) Phosphetal OAX is a phosphate ester of alcohol ethoxylate that functions as a coemulsifier and dispersing agent in aqueous formulations. They are used in metalworking fluids at up to 3% to increase machining efficiency, lengthen tool life and improve the ...view more Phosphetal OAX is a phosphate ester of alcohol ethoxylate that functions as a coemulsifier and dispersing agent in aqueous formulations. They are used in metalworking fluids at up to 3% to increase machining efficiency, lengthen tool life and improve the appearance of the finished parts. view less
Request Sample Phosphetal PP-6 Zschimmer & Schwarz USA (Lexolube group) Phosphetal PP-6 is a phosphate ester of alcohol ethoxylate that functions as a coemulsifier and dispersing agent in aqueous formulations. They are used in metalworking fluids at up to 3% to increase machining efficiency, lengthen tool life and improve the...view more Phosphetal PP-6 is a phosphate ester of alcohol ethoxylate that functions as a coemulsifier and dispersing agent in aqueous formulations. They are used in metalworking fluids at up to 3% to increase machining efficiency, lengthen tool life and improve the appearance of the finished parts. view less
Pluract 10+ Braskem S.A. Pluract 10+ is an aromatic hydrocarbon solvent.
Pluract 12+ Braskem S.A. Pluract 12+ is a hydrocarbon solvent.
Pluract 9 Braskem S.A. Pluract 9 is an aromatic hydrocarbon solvent.
Request Sample RB PAO 2 cSt Univar Solutions RB PAO 2 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in low viscosity compressor oils, hydraulic fluid, refrigeration lubricants, transmission fluids, synthetic carrier fluids, synthetic viscosity adjustment, cold cran...view more RB PAO 2 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in low viscosity compressor oils, hydraulic fluid, refrigeration lubricants, transmission fluids, synthetic carrier fluids, synthetic viscosity adjustment, cold crank reduction, and specialty industrial fluids. view less
Request Sample RB PAO 4 cSt Univar Solutions RB PAO 4 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fl...view more RB PAO 4 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fluids. view less
Request Sample RB PAO 6 cSt Univar Solutions RB PAO 6 cSt is PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in gear oils, hydraulic fluids, compressor oils, industrial valve lubricants, synthetic greases, crank case engine oils, dust suppressants, transformer oils, cable flu...view more RB PAO 6 cSt is PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in gear oils, hydraulic fluids, compressor oils, industrial valve lubricants, synthetic greases, crank case engine oils, dust suppressants, transformer oils, cable fluids, among others. view less
Request Sample RB PAO 8 cSt Univar Solutions RB PAO 8 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fl...view more RB PAO 8 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fluids. view less
RBW Sunflower Oil Cargill Industrial Specialties RBW Sunflower Oil is an alkali refined, bleached, and winterized sunflower oil. RBW Sunflower Oil applications may include, alkyd resins, urethanes, lubricant, hydraulic fluids, steel rolling oil, aluminum rolling oil and similar applications
Request Sample Ricinoleic Acid Acme Hardesty Co. Ricinoleic Acid is a castor oil derivative supplied as a liquid. It is a versatile product that is suitable for many applications across several industries. This product is recommended as an emulsifier and ester in lubricants and greases.