UL Prospector

Success!

Successfully saved your search
33 Results
A-C® 1660 Univar Solutions A-C® 1660 is high melt temperature, hard polypropylene (PP) homopolymer for use in solvent borne coatings and hot melt adhesives to improve surface properties (drag) and heat resistance. Request Sample
A-C® 1702 Univar Solutions A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by...view more A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. view less Request Sample
A-C® 1754 Univar Solutions A-C® 1754 is a polypropylene homopolymer. Request Sample
A-C® 316A Univar Solutions A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion re...view more A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less Request Sample
A-C® 325 Univar Solutions A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less Request Sample
A-C® 330 Univar Solutions A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less Request Sample
A-C® 392 Univar Solutions A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less Request Sample
A-C® 3A Univar Solutions A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the sur...view more A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the surface and therefore improving mar and abrasion resistance. . view less Request Sample
A-C® 400 Univar Solutions A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appli...view more A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. view less Request Sample
A-C® 405M Univar Solutions A-C® 405M is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Request Sample
A-C® 405T Univar Solutions A-C® 405T is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats. Request Sample
A-C® 415 Univar Solutions A-C® 415 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 15%, developed specifically to be used as an adhesive flooding compound between the cable bundle and extruded outer jacket in the manufacturing of cables. . Request Sample
A-C® 5120 Univar Solutions A-C® 5120 is ethylene acrylic acid copolymer in a prill form, with an acrylic acid content of 15%, promotes adhesion to various substrates, and rheology control for solventborne coatings. Request Sample
A-C® 540 Univar Solutions A-C® 540 is ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation. Request Sample
A-C® 540A Univar Solutions A-C® 540A is ethylene acrylic acid (EAA) copolymer in a powder form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation. Request Sample
A-C® 573P Univar Solutions A-C® 573P is ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid content of 10%, improves adhesion to various substrates, provides rheology control for solvent borne coatings along with providing metallic flake orientation. Request Sample
A-C® 596P Univar Solutions A-C® 596P is Propylene Maleic Anhydride Copolymer, with a SAP # of 50, in pastille form, provides non polar and polar characteristics which boost adhesion while maintaining oxadative stability. Request Sample
A-C® 6 Univar Solutions A-C® 6 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as ...view more A-C® 6 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. view less Request Sample
A-C® 617 Univar Solutions A-C® 617 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. Request Sample
A-C® 617A Univar Solutions A-C® 617A is low density polyethylene (LDPE) homopolymer in a powder form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. Request Sample
A-C® 629 Univar Solutions A-C® 629 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 629 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less Request Sample
A-C® 629A Univar Solutions A-C® 629A is low density Oxidized Polyethylene homopolymer in powder form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lo...view more A-C® 629A is low density Oxidized Polyethylene homopolymer in powder form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less Request Sample
A-C® 656 Univar Solutions A-C® 656 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 656 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less Request Sample
A-C® 6702 Univar Solutions A-C® 6702 is grease like, low temperature, completely amorphous, Low density Oxidized Polyethylene Homopolymer which can be emulsified for use in aqueous systems, for applications such as mold release and lubricants. Request Sample
A-C® 680 Univar Solutions A-C® 680 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 680 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less Request Sample
A-C® 6A Univar Solutions A-C® 6A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. Request Sample
A-C® 725 Univar Solutions A-C® 725 is low density polyethylene (LDPE) Homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. . Request Sample
A-C® 725P Univar Solutions A-C® 725P is low density polyethylene (LDPE) Homopolymer in a pastille form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. . Request Sample
A-C® 8 Univar Solutions A-C® 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. Request Sample
A-C® 820A Univar Solutions A-C® 820A is very low viscosity, medium density polyethylene (PE) homopolymer for use in solvent borne coatings, in heatset and liquid solvent borne inks to improve mar & abrasion (rub resistance) by lowering COF(Increasing slip). Request Sample
A-C® 8A Univar Solutions A-C® 8A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. Request Sample
A-C® 9 Univar Solutions A-C® 9 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. Request Sample
A-C® 9A Univar Solutions A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. Request Sample