| BASE 10 SE | Dover Chemical Corporation - Lubricant Additives | BASE 10 SE is a 10% sulfurized methyl ester designed to offer both lubricity and extreme pressure properties in oil and water dilutable metalworking fluids. BASE 10 SE is suitable for products destined for use in yellow metal applications (will not stain)...view more BASE 10 SE is a 10% sulfurized methyl ester designed to offer both lubricity and extreme pressure properties in oil and water dilutable metalworking fluids. BASE 10 SE is suitable for products destined for use in yellow metal applications (will not stain). view less | |
| BASE 101 | Dover Chemical Corporation - Lubricant Additives | BASE 101 is a sulfurized lard oil which offers exceptional solubility in highly refined petroleum oils and many synthetic base oils. BASE 101 has a low viscosity vs. other sulfurized lard oils, thus ambient temperature mixing is facilitated. | |
| BASE 10L | Dover Chemical Corporation - Lubricant Additives | BASE 10L is a 10% sulfurized fatty compound designed to offer both lubricity and extreme pressure properties in oil and water dilutable metalworking fluids. BASE 10L is suitable for products destined for use in yellow metal applications (will not stain). | |
| BASE 12 SE | Dover Chemical Corporation - Lubricant Additives | BASE 12 SE is a sulfurized methyl ester designed to offer both lubricity and extreme pressure properties in oil and water dilutable metalworking fluids. BASE 12 SE contains active sulfur and is NOT suitable for products destined for use in yellow metal ap...view more BASE 12 SE is a sulfurized methyl ester designed to offer both lubricity and extreme pressure properties in oil and water dilutable metalworking fluids. BASE 12 SE contains active sulfur and is NOT suitable for products destined for use in yellow metal applications (will stain). view less | |
| BASE 14L | Dover Chemical Corporation - Lubricant Additives | BASE 14L is a sulfurized compound that offers extreme pressure protection and lubricity to straight oil and water dilutable metalworking fluids. BASE 14L formulated fluids exhibit excellent to life and surface finish. | |
| BASE 401 | Dover Chemical Corporation - Lubricant Additives | BASE 401 is a high sulfur content hydrocarbon designed to offer extreme pressure protection in heavy duty machining and grinding fluids. BASE 401 is soluble in mineral oil and polyalphaolefins, but not soluble in water. BASE 401 contains active sulfur, so...view more BASE 401 is a high sulfur content hydrocarbon designed to offer extreme pressure protection in heavy duty machining and grinding fluids. BASE 401 is soluble in mineral oil and polyalphaolefins, but not soluble in water. BASE 401 contains active sulfur, so it is not recommended for applications involving brass, bronze, or copper. Additionally, it is not recommended for applications involving cobalt. view less | |
| BASE 44 | Dover Chemical Corporation - Lubricant Additives | BASE 44 is a sulfurized oleic acid for water dilutable applications. When neutralized with amine or caustic, BASE 44 forms a water dilutable soap that offers EP properties. Additionally, BASE 44 can be used in straight oil applications. | |
| BASE 75 | Dover Chemical Corporation - Lubricant Additives | BASE 75 is an amine-free sodium sulfonate high-soap emulsifier base used to produce soluble oils and emulsion cleaners. BASE 75 helps yield soluble oils that exhibit outstanding emulsion stability and wetting properties. | |
| BASE 76 | Dover Chemical Corporation - Lubricant Additives | BASE 76 is an amine-free sodium sulfonate no-soap emulsifier base used to produce soluble oils and emulsion cleaners. BASE 76 utilizes non-ionic emulsifiers to help yield soluble oils that exhibit outstanding emulsion stability and wetting properties. | |
| BASE 7800 | Dover Chemical Corporation - Lubricant Additives | Base 7800 is a premium, sulfonate-soap emulsifier base used for the production of naphthenic based soluble oils and emulsion cleaners. Base 7800 has excellent hard water tolerance, provides outstanding rust protection, and yields outstanding stability and...view more Base 7800 is a premium, sulfonate-soap emulsifier base used for the production of naphthenic based soluble oils and emulsion cleaners. Base 7800 has excellent hard water tolerance, provides outstanding rust protection, and yields outstanding stability and wetting. Base 7800 is used in combination with naphthenic base oils to produce soluble oils. Soluble oil components will include paraffinic oils, and may include lubricity additives, extreme pressure agents and biocides. view less | |
| BASE 79 | Dover Chemical Corporation - Lubricant Additives | BASE 79 is an amine-free sodium sulfonate moderate-soap emulsifier base used to produce soluble oils and emulsion cleaners. BASE 79 helps yield soluble oils that exhibit outstanding emulsion stability and wetting properties. | |
| BASE 8000P | Dover Chemical Corporation - Lubricant Additives | Base 8000P is a premium, sulfonate-soap emulsifier base used for the production of paraffinic based soluble oils and emulsion cleaners. Base 8000P has excellent hard water tolerance, provides outstanding rust protection, and yields outstanding stability a...view more Base 8000P is a premium, sulfonate-soap emulsifier base used for the production of paraffinic based soluble oils and emulsion cleaners. Base 8000P has excellent hard water tolerance, provides outstanding rust protection, and yields outstanding stability and wetting. view less | |
| BASE A-92 | Dover Chemical Corporation - Lubricant Additives | BASE A-92 is a sulfurized lard compound, which contains approximately 6% active sulfur, and provides excellent extreme pressure properties at a low cost. BASE A-92 is used as an EP agent in straight oil drawing, stamping and cutting fluids. | |
| BASE L-66 | Dover Chemical Corporation - Lubricant Additives | BASE L-66 is a sulfo-chlorinated fatty derivative designed for extreme pressure and lubricity protection. BASE L-66 may be used in a variety of metal cutting and drawing applications for both steel and aluminum based operations. This product offers simila...view more BASE L-66 is a sulfo-chlorinated fatty derivative designed for extreme pressure and lubricity protection. BASE L-66 may be used in a variety of metal cutting and drawing applications for both steel and aluminum based operations. This product offers similar performance to Chlorinated paraffins but at lower use levels. view less | |
| CHEMAL EM-500 | PCC Chemax, Inc. | Chemal EM-500 is an excellent emulsifier for mineral oil based systems. This product provides good blooming qualities which produce a highly stable oil in water emulsion. | |
| CHEMAX EM-1169 | PCC Chemax, Inc. | Chemax EM-1169 is recommended as a low foaming, emulsifier and lubricant additive for the production of stable emulsions of vegetables oils, especially for the application of soybean oil emulsification. | |
| CHEMAX EM-481 | PCC Chemax, Inc. | Chemax EM-481 is a versatile emulsifier for use with canola, paraffinic, naphthenic and safflower oils. The resultant emulsions exhibit good stability and can be used in fomulating water based coolants. | |
| CHEMAX EMX-1016 | PCC Chemax, Inc. | Chemax EMX-1016 is an effective d-limonene emulsifier in the production of stable, opalescent emulsions. In addition to being an effective emulsifier, this material also acts to reduce the surface tension of cleaning solutions and provides for increased d...view more Chemax EMX-1016 is an effective d-limonene emulsifier in the production of stable, opalescent emulsions. In addition to being an effective emulsifier, this material also acts to reduce the surface tension of cleaning solutions and provides for increased detergency. view less | |
| CHEMAX EMX-1032 | PCC Chemax, Inc. | Chemax EMX-1032 provides excellent emulsification and coupling activity with a variety of naturally occurring and synthetically derived oils and fatty acids. This product is compatible with extreme pressure additives, corrosion inhibitors, biocides and ma...view more Chemax EMX-1032 provides excellent emulsification and coupling activity with a variety of naturally occurring and synthetically derived oils and fatty acids. This product is compatible with extreme pressure additives, corrosion inhibitors, biocides and many other additives used in the metalworking, metal cleaning, textile and industrial cleaning industries. view less | |
| CHEMAX EMX-1033 | PCC Chemax, Inc. | Chemax EMX-1033 is used in the formulating of d-limonene emulsion concentrates for cleaning and degreasing of metals, textiles and hard surfaces. | |
| CHEMAX EMX-1154 | PCC Chemax, Inc. | Chemax EMX-1154 is recommended as a low foaming, self-emulsifying additive for the production of stable emulsions of vegetable oils, especially for the application of canola oil emulsification. | |
| CHEMAX EMX-1155 | PCC Chemax, Inc. | Chemax EMX-1155 is designed for use in metal forming operations from stamping to deep draw applications. This material may comprise from 20–25% of a typical forming compound which would then be diluted to 5–50% based on severity of the operation. | |
| CHEMAX EMX-VO-100 | PCC Chemax, Inc. | Self emulsifying ester | |
| CHEMAX NDO-250 | PCC Chemax, Inc. | Chemax NDO-250 is a synthetic polymerized ester designed to boost lubricity in severe metalworking applications. | |
| CHEMAX NDO-300 | PCC Chemax, Inc. | Chemax NDO-300 is a polymerized water soluble specialty ester. | |
| CHEMAX NDO-350 | PCC Chemax, Inc. | Chemax NDO-350 is a polymerized water dilutable specialty ester. | |
| CHEMAX WHA-100 | PCC Chemax, Inc. | Chemax WHA-100 is recommended as an additive for coolants containing fatty acids or coolants where the formation of water hardness soaps is undesirable. Chemax WHA-100 prevents reactions with water hardness ions without scavenging metal ions from work pie...view more Chemax WHA-100 is recommended as an additive for coolants containing fatty acids or coolants where the formation of water hardness soaps is undesirable. Chemax WHA-100 prevents reactions with water hardness ions without scavenging metal ions from work pieces while increasing the level of hydrodynamic lubrication in metalworking coolants. view less | |
| CHEMAX WHA-200 | PCC Chemax, Inc. | Chemax WHA-200 is recommended as an additive for coolants containing fatty acids or coolants where the formation of water hardness soaps is undesirable. Chemax WHA-200 prevents reactions with water hardness ions without scavenging metal ions from work pie...view more Chemax WHA-200 is recommended as an additive for coolants containing fatty acids or coolants where the formation of water hardness soaps is undesirable. Chemax WHA-200 prevents reactions with water hardness ions without scavenging metal ions from work pieces while increasing the level of hydrodynamic lubrication in metalworking coolants. view less | |
| CHEMFAC NA-350 | PCC Chemax, Inc. | Chemfac NA-350 is used in metalworking applications to impart emulsification, lubricity and extreme pressure attributes. | |
| CHEMFAC NB-126 | PCC Chemax, Inc. | Chemfac NB-126 offers EP, emulsification and wetting properties to metal working fluids and cleaners. | |
| CHEMFAC NB-159 | PCC Chemax, Inc. | Chemfac NB-159 is used to enhance lubricity and emulsification attributes in metalworking formulations. This product also provides mild extreme pressure properties to these same systems. Detergency and wetting properties of hard surface cleaners are also ...view more Chemfac NB-159 is used to enhance lubricity and emulsification attributes in metalworking formulations. This product also provides mild extreme pressure properties to these same systems. Detergency and wetting properties of hard surface cleaners are also improved by the addition of this product. view less | |
| CHEMFAC NC-096 | PCC Chemax, Inc. | Chemfac NC-096 functions as a lubricant and EP agent in metalworking applications and cutting fluids. This material also functions as an anti-redeposition agent and dispersant in textile applications. | |
| CHEMFAC PA-080 | PCC Chemax, Inc. | Chemfac PA-080 is an oil soluble free acid phosphate ester which offers good detergency and hydrotroping in alkaline cleaner formulations for textile and I&I applications. The solubility characteristics and EP properties make it an ideal choice for metalw...view more Chemfac PA-080 is an oil soluble free acid phosphate ester which offers good detergency and hydrotroping in alkaline cleaner formulations for textile and I&I applications. The solubility characteristics and EP properties make it an ideal choice for metalworking fluids. view less | |
| CHEMFAC PA-1315 | PCC Chemax, Inc. | Chemfac PA-1315 is a free acid phosphate ester made from a branched alcohol. This product exhibits good lubricity and EP properties for metalworking formulations. It also contributes wetting and detergency characteristics for metal cleaning applications. | |
| CHEMFAC PA-800 | PCC Chemax, Inc. | Chemfac PA-800 is a free acid phosphate ester made from a linear alcohol. This material has good lubricity and emulsification properties in addition to EP. This chain length provides wetting and detergency for cleaning formulations. | |
| CHEMFAC PB-133 | PCC Chemax, Inc. | Chemfac PB-133 is an aliphatic based phosphate ester. It offers excellent hard surface wetting, lubricity and EP properties and is primarily recommended for straight and soluble oil and semisynthetic formulations. | |
| CHEMFAC PB-136 | PCC Chemax, Inc. | Chemfac PB-136 is a free acid phosphate ester which provides wetting, detergency and hydrotroping qualities to cleaning formulations. This products also exhibits mild EP properties, lubricity and emulsification attributes in metalworking formulations. | |
| CHEMFAC PB-184 | PCC Chemax, Inc. | Chemfac PB-184 is a free acid phosphate ester which provides lubricity, emulsification and EP properties to metalworking formulations. When neutralized, this material provides mild wetting and detergency properties for hard surface cleaning. | |
| CHEMFAC PB-264 | PCC Chemax, Inc. | Chemfac PB-264 is a free acid phosphate ester which exhibits lubricity and emulsification properties in metalworking fluids. In addition to these primary attributes, this material also provides some corrosion inhibition properties and wetting and detergen...view more Chemfac PB-264 is a free acid phosphate ester which exhibits lubricity and emulsification properties in metalworking fluids. In addition to these primary attributes, this material also provides some corrosion inhibition properties and wetting and detergency characteristics. view less | |
| CHEMFAC PC-006 | PCC Chemax, Inc. | Chemfac PC-006 is phosphate ester made from an ethoxylated aromatic. This ester has a a wide range of functionality including hydrotroping capability, EP properties, wetting and detergency characteristics and lubricity. | |
| CHEMFAC PC-099 | PCC Chemax, Inc. | Chemfac PC-099 is a free acid phosphate ester which is used for adding hydrotroping and detergency properties in water based cleaners for I&I, textiles and metals. This material also offers EP properties and lubricity to synthetic and semi-synthetic metal...view more Chemfac PC-099 is a free acid phosphate ester which is used for adding hydrotroping and detergency properties in water based cleaners for I&I, textiles and metals. This material also offers EP properties and lubricity to synthetic and semi-synthetic metalworking formulations. view less | |
| CHEMFAC PC-188 | PCC Chemax, Inc. | Chemfac PC-188 is a free acid phosphate ester which provides lubricity and emulsification properties to metalworking and textile formulations. This material provides mild EP properties to metalworking fluids and mild wetting and detergency for hard surfac...view more Chemfac PC-188 is a free acid phosphate ester which provides lubricity and emulsification properties to metalworking and textile formulations. This material provides mild EP properties to metalworking fluids and mild wetting and detergency for hard surface cleaning. view less | |
| CHEMFAC PF-636 | PCC Chemax, Inc. | Chemfac PF-636 is a free acid phosphate ester made from a glycol source. This material works exceptionally well in synthetic and semi-synthetic fluids due to good EP and lubricity properties. This ester also has good alkaline compatibility and wetting and...view more Chemfac PF-636 is a free acid phosphate ester made from a glycol source. This material works exceptionally well in synthetic and semi-synthetic fluids due to good EP and lubricity properties. This ester also has good alkaline compatibility and wetting and detergency attributes. view less | |
| DA-8506XS | Dover Chemical Corporation - Lubricant Additives | DA-8506XS is a stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It is a nonflammable, non-corrosive, low volatile liquid at room ...view more DA-8506XS is a stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. DA-8506XS is fortified against corrosion. It is typically applied in straight and soluble oil machining, drawing and stamping fluids when a formulation requires additional wetting, lubricity or EP properties. view less | |
| DA-8527 | Dover Chemical Corporation - Lubricant Additives | DA-8527 is a stabilized chlorinated fatty acid designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. DA-8527 exhibits good adherence to metal surfaces and provides EP pr...view more DA-8527 is a stabilized chlorinated fatty acid designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. DA-8527 exhibits good adherence to metal surfaces and provides EP properties to the incorporated fluids. DA-8527 can be made water soluble when neutralized with a slight excess of an alkanolamine which makes it a good chlorinated additive for synthetic fluids. Starting guidelines are 3-10% by weight in the fluid. view less | |
| DOVER 107 | Dover Chemical Corporation - Lubricant Additives | DOVER 107 is a 17% sulfurized lard oil possessing outstanding solubility in refined petroleum oils and many synthetic base oils. Its lower viscosity facilitates ambient temperature blending. DOVER 107 is recommended for straight oil machining, drawing and...view more DOVER 107 is a 17% sulfurized lard oil possessing outstanding solubility in refined petroleum oils and many synthetic base oils. Its lower viscosity facilitates ambient temperature blending. DOVER 107 is recommended for straight oil machining, drawing and stamping fluids, and can be formulated into soluble oils. DOVER 107 has 6% active sulfur, so it is not recommended for use in applications involving yellow metals (copper, brass, & bronze). view less | |
| DOVERFLEX 100 | Dover Chemical Corporation - Lubricant Additives | DOVERFLEX 100 is a viscous fatty derivative that offers inhibition and protection against the possibility of corrosion and/or staining of ferrous alloys by highly chlorinated cutting or forming oils. When metalworking oils are formulated to contain chlori...view more DOVERFLEX 100 is a viscous fatty derivative that offers inhibition and protection against the possibility of corrosion and/or staining of ferrous alloys by highly chlorinated cutting or forming oils. When metalworking oils are formulated to contain chlorinated paraffin, one always runs the risk of potential staining, especially in areas or times of high humidity, or when water contamination may occur. The chlorinated paraffin degrades and generates hydrochloric acid (HCL) which causes the corrosion on the manufactured parts and/or machine. DOVERFLEX 100 is recommended for incorporation into the cutting or forming oils, due to the targeted application, require the use of chlorinated paraffins as the primary EP performance package. view less | |
| DOVERLUBE NCL-2 | Dover Chemical Corporation - Lubricant Additives | DOVERLUBE NCL-2 a proprietary, non-chlorinated lubrication additive containing non-halogenated extreme pressure (EP) and anti-wear additives, from which two types of reactive EP additives are generated in-situ under severe friction conditions (reversible ...view more DOVERLUBE NCL-2 a proprietary, non-chlorinated lubrication additive containing non-halogenated extreme pressure (EP) and anti-wear additives, from which two types of reactive EP additives are generated in-situ under severe friction conditions (reversible reaction). Unlike other non-chlorinated additives, it does not rely on viscosity to perform as an EP additive. DOVERLUBE NCL-2 is compatible with naphthenic oil and can be made compatible with paraffinic oil by adding petroleum sulfonate or other couplers (about ½ to equal % to optimize compatibility). It is non-corrosive and disposal of fluids containing it offers no handling problems. view less | |
| EM 40 | Dover Chemical Corporation - Lubricant Additives | EM 40 is a specially modified glycerol monotallate that is an oil soluble, non-ionic liquid surfactant. EM 40 is an excellent emulsifier for water in oil emulsions and can be used with hydrophilic emulsifiers to yield both oil in water and water in oil em...view more EM 40 is a specially modified glycerol monotallate that is an oil soluble, non-ionic liquid surfactant. EM 40 is an excellent emulsifier for water in oil emulsions and can be used with hydrophilic emulsifiers to yield both oil in water and water in oil emulsions. EM 40 is soluble in many alcohols, aromatic and aliphatic hydrocarbons, but is insoluble in water. It is ashless and will not deposit a metallic film or stain metal subject to annealing or heat treated operations. view less | |
| EM 600 | Dover Chemical Corporation - Lubricant Additives | EM 600 is an emulsifier for use in water soluble metalworking fluids. EM 600 helps improve wetting characteristics and offers lubricity and detergency, aiding in dispersion of hard water soaps. EM 600 is designed for use in soluble oils, synthetics, and s...view more EM 600 is an emulsifier for use in water soluble metalworking fluids. EM 600 helps improve wetting characteristics and offers lubricity and detergency, aiding in dispersion of hard water soaps. EM 600 is designed for use in soluble oils, synthetics, and semi-synthetics. view less | |
| EM 706 | Dover Chemical Corporation - Lubricant Additives | EM 706 is a phosphate ester that brings lubricity and anti-wear properties to metalworking fluids. It may be formulated into straight oils and water extendable fluids. This product may help prevent the staining of nonferrous metals in some applications. E...view more EM 706 is a phosphate ester that brings lubricity and anti-wear properties to metalworking fluids. It may be formulated into straight oils and water extendable fluids. This product may help prevent the staining of nonferrous metals in some applications. EM 706 may be formulated into straight oils, water dilutable soluble oils, and semi-synthetic coolants. view less | |
| EM 9400 | Dover Chemical Corporation - Lubricant Additives | EM 9400 is an air-blown synthetic replacement for blown sperm oil. Its properties in regard to emulsion promotion and mineral oil stability are similar to blown sperm oil. It is soluble in most mineral oils and organic solvents, but is not soluble in wate...view more EM 9400 is an air-blown synthetic replacement for blown sperm oil. Its properties in regard to emulsion promotion and mineral oil stability are similar to blown sperm oil. It is soluble in most mineral oils and organic solvents, but is not soluble in water. EM 9400 improve surface wetting properties of lubricants and preservative oils. Additionally, it offers excellent corrosion protection for ferrous and non-ferrous materials when used in cutting oils and drawing compounds. view less | |
| EM 995 | Dover Chemical Corporation - Lubricant Additives | EM 995 is a DEA-free tall oil fatty amide designed for use in water soluble metalworking fluids. It imparts lubricity, corrosion protection, improved metal wetting and secondary emulsification abilities. Additionally, it can be used as an alkaline reserve...view more EM 995 is a DEA-free tall oil fatty amide designed for use in water soluble metalworking fluids. It imparts lubricity, corrosion protection, improved metal wetting and secondary emulsification abilities. Additionally, it can be used as an alkaline reserve and as a viscosity builder in synthetics and semi-synthetics. EM 995 can be formulated into soluble oils, synthetics, and semi-synthetic metalworking fluids. view less | |
| EMULAMID FO-5DF | Dover Chemical Corporation - Lubricant Additives | EMULAMID FO-5DF is a DEA-free fatty amide designed for incorporation into most water dilutable metalworking products. EMULAMID FO-5DF, in addition to corrosion inhibition, provides enhanced boundary lubricity and metal wetting characteristics to the finis...view more EMULAMID FO-5DF is a DEA-free fatty amide designed for incorporation into most water dilutable metalworking products. EMULAMID FO-5DF, in addition to corrosion inhibition, provides enhanced boundary lubricity and metal wetting characteristics to the finished coolant. Also enhanced hard water stability can be achieved with this product compared to the conventional DEA-containing amides. view less | |
| Extra Winter Strained Lard Oil | Dover Chemical Corporation - Lubricant Additives | Extra Winter Strained Lard Oil is a lubricity additive. It has a flashpoint of 450 degrees Fahrenheit. | |
| INVERSOL 140 | Dover Chemical Corporation - Lubricant Additives | INVERSOL 140 is a water soluble, complex ester based, lubricity additive designed for synthetic, water dilutable metalworking fluids. It does NOT contain sulfur, phosphorus, or chlorine based components. This product is inversely soluble, forming an insol...view more INVERSOL 140 is a water soluble, complex ester based, lubricity additive designed for synthetic, water dilutable metalworking fluids. It does NOT contain sulfur, phosphorus, or chlorine based components. This product is inversely soluble, forming an insoluble layer at elevated temperatures to impart a lubricating film at the tool/workpiece interface. INVERSOL 140 works well with both ferrous and non-ferrous metals. view less | |
| KEIL-FLO 150 | Dover Chemical Corporation - Lubricant Additives | KEIL-FLO 150 is a 50% active hydrocarbon derived pour point depressant. It improves low temperature properties of fluids by inhibiting wax crystal and gel formation. KEIL-FLO 150 is ashless and does not promote corrosion. KEIL-FLO 150 exhibits exceptional...view more KEIL-FLO 150 is a 50% active hydrocarbon derived pour point depressant. It improves low temperature properties of fluids by inhibiting wax crystal and gel formation. KEIL-FLO 150 is ashless and does not promote corrosion. KEIL-FLO 150 exhibits exceptional performance in paraffinic stocks with visocosities up to 250 SUS.at 100°F. view less | |
| KEIL-FLO 195 | Dover Chemical Corporation - Lubricant Additives | KEIL-FLO 195 is a 95% active hydrocarbon derived pour point depressant. It improves low temperature properties of fluids by inhibiting wax crystal and gel formation. This product is ashless, completely resistant to shear, and does not promote corrosion. I...view more KEIL-FLO 195 is a 95% active hydrocarbon derived pour point depressant. It improves low temperature properties of fluids by inhibiting wax crystal and gel formation. This product is ashless, completely resistant to shear, and does not promote corrosion. It exhibits exceptional performance in solvent extracted neutral base stocks as well as hydrocracked base stocks. Recommended use guidelines range from 0.05 – 0.20%. view less | |
| KLOR-FREE 100 | Dover Chemical Corporation - Lubricant Additives | KLOR-FREE 100 is an oil soluble, non-staining, proprietary polymeric ester additive for metalworking fluids and lubricant applications. KLOR-FREE 100 exhibits excellent hydrolytic stability, oxidative resistance, and does not promote foam formation. It ca...view more KLOR-FREE 100 is an oil soluble, non-staining, proprietary polymeric ester additive for metalworking fluids and lubricant applications. KLOR-FREE 100 exhibits excellent hydrolytic stability, oxidative resistance, and does not promote foam formation. It can be recommended as a replacement for chlorinated paraffin in almost every metalworking operation. KLOR-FREE 100 is an excellent lubricant shown to replace chlorine based additives in various machining fluids. It is soluble in both naphthenic and paraffinic base oils. KLOR-FREE 100 is compatible with most ingredients in soluble oils and exhibits a stabilizing effect on emulsions. view less | |
| LUBE-BOOSTER® II | Dover Chemical Corporation - Lubricant Additives | LUBE-BOOSTER® II is a water souluble, polymer based lubricity additive for synthetic and semi-synthetic fluids (ferrous and non-ferrous applications). It can be used for general and multi-metal machining; and especially in combination with EM-706 in drawi...view more LUBE-BOOSTER® II is a water souluble, polymer based lubricity additive for synthetic and semi-synthetic fluids (ferrous and non-ferrous applications). It can be used for general and multi-metal machining; and especially in combination with EM-706 in drawing and stamping, and aluminum alloy machining. In addition, for heavy operations LUBE-BOOSTER® II can be added tank-side to improve lubricity and surface finish. LUBE-BOOSTER® II exhibits low-foaming properties at 1% in tap water and has moderate hard water stability. LUBE-BOOSTER® II utilizes straight chain chemistry to preserve a biodegradable profile and is compatible with most publicly owned waste water treatment facilities (POWT). view less | |
| MAXBASE 115 | PCC Chemax, Inc. | MaxBase 155 is an emulsifier base made from natural sulfonate that is designed for use in a variety of naphthenic base oil. | |
| MAXCOR RP-4405 | PCC Chemax, Inc. | MaxCor RP-4405 is a biodegradable, ashless rust preventative for industrial and automotive lubricants, including greases. | |
| MAXCOR RP-5575 | PCC Chemax, Inc. | MaxCor RP-5575 is a liquid, wax containing rust preventative formulated for rust preventative fluids for use in harsh environments, such as salt fog exposure. | |
| MAXCOR RP-6655 | PCC Chemax, Inc. | MaxCor RP-6655 is a liquid, wax containing rust preventative formulated for rust preventative fluids for use in harsh environments, such as salt fog exposure. | |
| MAXHIB AA-0223 | PCC Chemax, Inc. | Maxhib AA-0223 protects multiple aluminum alloys from staining in traditional metalworking fluids. This material is both oil and solvent soluble and forms a stable dispersion at aqueous dilution. | |
| MAXHIB AB-400 | PCC Chemax, Inc. | Maxhib AB-400 is a borate containing corrosion inhibitor for use in metalworking fluids and industrial cleaners. As well as being hard water stable and low foaming, Maxhib AB-400 is extremely biostable. | |
| MAXHIB ABC-5050 | PCC Chemax, Inc. | Maxhib ABC-5050 is formulated to offer a dual purpose corrosion inhibitor for the formulation of cutting fluids, drawing compounds and industrial cleaners. | |
| MAXHIB AC-5000 | PCC Chemax, Inc. | Maxhib AC-5000 is an amine carboxylate based corrosion inhibitor designed for use in metalworking fluids and industrial cleaners. The solubility in water and glycols makes it a product of choice when formulating synthetic cutting fluids. | |
| MAXHIB AC-5080 | PCC Chemax, Inc. | Maxhib AC-5080 is designed for use in cutting fluids, drawing compounds and industrial cleaners. This inhibitor is safe on galvanized metal, aluminum and copper. The solubility of Maxhib AC-5080 in water and glycols makes it a product of choice when formu...view more Maxhib AC-5080 is designed for use in cutting fluids, drawing compounds and industrial cleaners. This inhibitor is safe on galvanized metal, aluminum and copper. The solubility of Maxhib AC-5080 in water and glycols makes it a product of choice when formulating synthetic cutting fluids. view less | |
| MAXHIB AC-5144 | PCC Chemax, Inc. | Maxhib AC-5144 is designed for use in cutting fluids, drawing compounds and industrial cleaners. Maxhib AC-5144 is safe on galvanized steel, aluminum and copper. The solubility of Maxhib AC-5144 in water and glycols makes it a product of choice when formu...view more Maxhib AC-5144 is designed for use in cutting fluids, drawing compounds and industrial cleaners. Maxhib AC-5144 is safe on galvanized steel, aluminum and copper. The solubility of Maxhib AC-5144 in water and glycols makes it a product of choice when formulating synthetic cutting fluids. view less | |
| MAXHIB AC-5480 | PCC Chemax, Inc. | Maxhib AC-5480 is an amine carboxylate based corrosion inhibitor designed for use in metalworking fluids and industrial cleaners. The solubility in water and glycols makes it a product of choice when formulating synthetic cutting fluids. | |
| MAXHIB AC-790 | PCC Chemax, Inc. | Maxhib AC-790 is recommended as a replacement for sodium nitrite as a corrosion inhibitor in synthetic and water emulsifiable cutting fluids and drawing compounds. Maxhib AC-790 is compatible with emulsifiers, surfactants, chemical and E.P. lubricity addi...view more Maxhib AC-790 is recommended as a replacement for sodium nitrite as a corrosion inhibitor in synthetic and water emulsifiable cutting fluids and drawing compounds. Maxhib AC-790 is compatible with emulsifiers, surfactants, chemical and E.P. lubricity additives and other corrosion inhibitors. view less | |
| MAXHIB AC-8150 | PCC Chemax, Inc. | Maxhib AC-8150 is recommended for use as a corrosion inhibitor in cutting fluids, drawing compounds and industrial cleaners. Maxhib AC-8150 is very effective in alkaline cleaners and rinse solutions where residual protection is required. | |
| MAXHIB OA-3090 | PCC Chemax, Inc. | Maxhib OA-3090 is recommended to replace sodium nitrite as the corrosion inhibitor when formulating cutting fluids, drawing compounds and industrial cleaners. Maxhib OA-3090 is especially effective in preventing vapor phase corrosion and protecting non-fe...view more Maxhib OA-3090 is recommended to replace sodium nitrite as the corrosion inhibitor when formulating cutting fluids, drawing compounds and industrial cleaners. Maxhib OA-3090 is especially effective in preventing vapor phase corrosion and protecting non-ferrous metals. view less | |
| MAXHIB OS-4300 | PCC Chemax, Inc. | Maxhib OS-4300 is a corrosion inhibiting additive that when diluted with oil, kerosene or mineral spirits, is recommended as a rust inhibitor in an acid atmosphere. Maxhib OS-4300 may be used as a corrosion inhibitor additive for the preparation of metalw...view more Maxhib OS-4300 is a corrosion inhibiting additive that when diluted with oil, kerosene or mineral spirits, is recommended as a rust inhibitor in an acid atmosphere. Maxhib OS-4300 may be used as a corrosion inhibitor additive for the preparation of metalworking products, oil and solvent based corrosion preventives and slushing oils. view less | |
| MAXHIB OS-4401 | PCC Chemax, Inc. | Maxhib OS-4401 is an oil soluble inhibitor that, when diluted with oil, kerosene or mineral spirits is a general purpose rust inhibitor. It may be used in the preparation of metalworking and metal cleaning materials, solvent and water emulsifiable corrosi...view more Maxhib OS-4401 is an oil soluble inhibitor that, when diluted with oil, kerosene or mineral spirits is a general purpose rust inhibitor. It may be used in the preparation of metalworking and metal cleaning materials, solvent and water emulsifiable corrosion treatments and slushing oils. view less | |
| MAXHIB PT-10T | PCC Chemax, Inc. | Maxhib PT-10T is a low foaming, water soluble corrosion inhibitor which provides excellent inhibiting properties for ferrous, non-ferrous and aluminum surfaces when used alone or in combination with synthetic lubricant components such as functional fluids...view more Maxhib PT-10T is a low foaming, water soluble corrosion inhibitor which provides excellent inhibiting properties for ferrous, non-ferrous and aluminum surfaces when used alone or in combination with synthetic lubricant components such as functional fluids, block polymers, low foam surfactants, sulfated esters, fatty acid soaps, etc. Maxhib PT-10T contains phosphorous and adds extreme pressure properties to lubricant formulations. view less | |
| MAXHIB ST-2220 | PCC Chemax, Inc. | Maxhib ST-2220 is a balanced blend of powdered ingredients designed to replace sodium nitrite in industrial cleaners. Its physical form and alkaline compatibility make it an ideal choice for use in powdered cleaner formulations. | |
| MAXLUBE 155 | PCC Chemax, Inc. | Maxlube 155 is a nonionic lubricant that is free of Sulfur, Chlorine and Phosphorus and will greatly improve your aluminum and ferrous coolants. | |
| MAXLUBE 200 | PCC Chemax, Inc. | Maxlube 200 provides excellent lubricity at low use levels in oil based systems where it imparts antiwear properties. This product is also recommended for ashless antiwear applications including hydraulic fluids and gear oils. | |
| MAXLUBE 405 | PCC Chemax, Inc. | Maxlube 405 is a lubricity additive designed to be used in synthetic and semi-synthetic metalworking fluids, drawing compounds, can drawing compounds and water based hydraulic fluids. Maxlube 405 is safe on all metals and provides excellent lubricity at l...view more Maxlube 405 is a lubricity additive designed to be used in synthetic and semi-synthetic metalworking fluids, drawing compounds, can drawing compounds and water based hydraulic fluids. Maxlube 405 is safe on all metals and provides excellent lubricity at low concentrations in water. Maxlube 405 exhibits good anti-wear and extreme pressure properties. view less | |
| MAXLUBE 405C | PCC Chemax, Inc. | Maxlube 405C is a lubricity additive designed to be used in synthetic and semi-synthetic metalworking fluids, drawing compounds, can drawing compounds and water based hydraulic fluids. Maxlube 405C is safe on all metals and provides excellent lubricity at...view more Maxlube 405C is a lubricity additive designed to be used in synthetic and semi-synthetic metalworking fluids, drawing compounds, can drawing compounds and water based hydraulic fluids. Maxlube 405C is safe on all metals and provides excellent lubricity at low concentrations in water. Maxlube 405C exhibits good anti-wear and extreme pressure properties. view less | |
| MAXLUBE 510 | PCC Chemax, Inc. | Maxlube 510 is a water soluble lubricant additive. It was developed to enhance the lubrication characteristics of metalworking and metal forming products. Due to its high viscosity and aqueous solubility, it is ideally suited for use in synthetic and semi...view more Maxlube 510 is a water soluble lubricant additive. It was developed to enhance the lubrication characteristics of metalworking and metal forming products. Due to its high viscosity and aqueous solubility, it is ideally suited for use in synthetic and semi-synthetic coolants to increase dynamic lubricity. view less | |
| MAXLUBE 510/60 | PCC Chemax, Inc. | Maxlube 510/60 is high molecular weight alkoxylate which provides excellent lubricity attributes in metalworking and textile applications. This product is recommended for use in heavy duty grinding coolants and light duty machining coolants as a hydrodyna...view more Maxlube 510/60 is high molecular weight alkoxylate which provides excellent lubricity attributes in metalworking and textile applications. This product is recommended for use in heavy duty grinding coolants and light duty machining coolants as a hydrodynamic lubricant for aluminum and ferrous alloys. view less | |
| MAXLUBE MV | PCC Chemax, Inc. | Maxlube MV is useful as a boundary lubricant in light duty, low viscosity oil based lubricants for soluble and semi-synthetic water based coolants. This product is also an excellent stand alone lubricant for high speed bearings. | |
| MAXLUBE RO-100 | PCC Chemax, Inc. | Maxlube RO-100 is a vegetable based polymerized branched chained ester designed to boost performance and enhance finish in severe metalworking applications, especially aluminum applications and drawing and stamping. | |
| MAYCHLOR 1010 | Dover Chemical Corporation - Lubricant Additives | MAYCHLOR 1010 is a sulfurized/chlorinated fatty additive, which provides superior extreme pressure characteristics to cutting and grinding fluids. The synergistic effect of sulfur and chlorine on the same fatty molecule allows the formulator to lower the ...view more MAYCHLOR 1010 is a sulfurized/chlorinated fatty additive, which provides superior extreme pressure characteristics to cutting and grinding fluids. The synergistic effect of sulfur and chlorine on the same fatty molecule allows the formulator to lower the additive treat rate and not rely on matching chemical quantities on a one-to-one basis. MAYCHLOR 1010 yields low odor and exhibits lighter color than conventional sulfur-containing additives. Its low viscosity makes MAYCHLOR 1010 easy to blend and aesthetically pleasing to the machine operators. view less | |
| MAYCHLOR HV LITE | Dover Chemical Corporation - Lubricant Additives | MAYCHLOR HV LITE offers the formulator and manufacturer of metalworking products an alternative to the conventional, separately added, sulfurized and chlorinated chemistries, in that, sulfur, chlorine, and the fatty constituent can all be added with the i...view more MAYCHLOR HV LITE offers the formulator and manufacturer of metalworking products an alternative to the conventional, separately added, sulfurized and chlorinated chemistries, in that, sulfur, chlorine, and the fatty constituent can all be added with the incorporation of one additive. The light color and low odor of MAYCHLOR HV LITE make it aesthetically pleasing to machine operators use to dark strong smelling cutting oils. The high viscosity and the premium quality fatty base of MAYCHLOR HV LITE makes it an ideal additive for blending into heavy duty drawing and stamping oils. Also, its non-staining characteristic makes it suitable for use in both ferrous and non-ferrous operations. view less | |
| MAYCHLOR SL-6 | Dover Chemical Corporation - Lubricant Additives | MAYCHLOR SL-6 offers the formulator and manufacturer of metalworking products an alternative to the conventional, separately added, sulfurized and chlorinated chemistries, in that, sulfur, chlorine, and the fatty constituent can all be added with the inco...view more MAYCHLOR SL-6 offers the formulator and manufacturer of metalworking products an alternative to the conventional, separately added, sulfurized and chlorinated chemistries, in that, sulfur, chlorine, and the fatty constituent can all be added with the incorporation of one additive. The light color and low odor of MAYCHLOR SL-6 make it aesthetically pleasing to machine operators use to dark strong smelling cutting oils. The high viscosity and the premium quality fatty base of MAYCHLOR SL-6 makes it an ideal additive for blending into heavy duty drawing and stamping oils. Also, its non-staining characteristic makes it suitable for use in both ferrous and non-ferrous operations. view less | |
| MAYCO® BASE 1210 | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE 1210 is a non-staining extreme pressure additive that can be used in compounding metalworking oils, soluble oils, and industrial greases. MAYCO® BASE 1210 is a fully reacted sulfur compound, no free or active sulfur is present to adversely eff...view more MAYCO® BASE 1210 is a non-staining extreme pressure additive that can be used in compounding metalworking oils, soluble oils, and industrial greases. MAYCO® BASE 1210 is a fully reacted sulfur compound, no free or active sulfur is present to adversely effect operations performed on the yellow metals. MAYCO® BASE 1210 is not recommended for use in cutting oils which are based on paraffinic oils, so the use of naphthenic base stock is encouraged. view less | |
| MAYCO® BASE 1214G | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE 1214G is a highly sulfurized fatty material which provides a blender with an economical method of incorporating E.P. property to cutting oil formulations. It contains active sulfur, so is not recommended for use in products destined to be use ...view more MAYCO® BASE 1214G is a highly sulfurized fatty material which provides a blender with an economical method of incorporating E.P. property to cutting oil formulations. It contains active sulfur, so is not recommended for use in products destined to be use in yellow metal (copper, brass, & bronze) applications. This product is a very good choice for ferrous pipe threading operations at a recommended treat of 15-20%. MAYCO® BASE 1214G is soluble in naphthenic base stocks but not paraffinic oils. view less | |
| MAYCO® BASE 1217LV | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE 1217LV is a highly sulfurized, low viscosity fatty material. The additive's low viscosity allows the metalworking blender to bypass heated storage, usually mandatory in dealing with most fortified sulfurized additives. MAYCO® BASE 1217LV is no...view more MAYCO® BASE 1217LV is a highly sulfurized, low viscosity fatty material. The additive's low viscosity allows the metalworking blender to bypass heated storage, usually mandatory in dealing with most fortified sulfurized additives. MAYCO® BASE 1217LV is not recommended for use in products destined for applications on any yellow metals (copper, brass, & bronzes), due to its high level of activity. Also, it is recommended the additive be incorporated in naphthenic oil-based products, as opposed to paraffinic-oil based products. view less | |
| MAYCO® BASE 1351 | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE 1351 is a sulfurized fatty material, which due to its low viscosity, lends itself to a variety of ferrous application needs. It can also be used in severe operations on difficult to machine brass and bronzes due to its non-staining characteris...view more MAYCO® BASE 1351 is a sulfurized fatty material, which due to its low viscosity, lends itself to a variety of ferrous application needs. It can also be used in severe operations on difficult to machine brass and bronzes due to its non-staining characteristic. MAYCO® BASE 1351 can be used in dual-purpose applications and is an additive of choice in the formulation of way lubricants, where the recommended treat is 5% by weight. view less | |
| MAYCO® BASE 1362 | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE 1362 is a sulfurized fatty material, which due to its low viscosity, lends itself to a variety of ferrous application needs. MAYCO® BASE 1362 can also be used in severe operations on difficult to machine ferrous alloys. Due to the active sulfu...view more MAYCO® BASE 1362 is a sulfurized fatty material, which due to its low viscosity, lends itself to a variety of ferrous application needs. MAYCO® BASE 1362 can also be used in severe operations on difficult to machine ferrous alloys. Due to the active sulfur present, it is not recommended for the machining of copper, brass, or bronze alloys. view less | |
| MAYCO® BASE 1540 | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE 1540 is a highly sulfurized additive designed for severe metalworking operations. This product is especially well suited for high stock removal grinding applications and all jobs that require low viscosity and high sulfur content. MAYCO® BASE ...view more MAYCO® BASE 1540 is a highly sulfurized additive designed for severe metalworking operations. This product is especially well suited for high stock removal grinding applications and all jobs that require low viscosity and high sulfur content. MAYCO® BASE 1540 possesses relatively low odor and low viscosity, thus making blending an easy task. The product’s high solubility also allows the additive to also be used as a tankside performance booster to an existing cutting oil. view less | |
| MAYCO® BASE 4220 | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE 4220 is a sulfurized methyl ester designed to be used in products where low viscosity, excellent base oil (especially highly refined paraffinic) stability, and high wetting characteristics are key. It possesses relatively low odor for such a h...view more MAYCO® BASE 4220 is a sulfurized methyl ester designed to be used in products where low viscosity, excellent base oil (especially highly refined paraffinic) stability, and high wetting characteristics are key. It possesses relatively low odor for such a highly sulfurized additive and the very low viscosity makes blending the additive into base oil an easy task. MAYCO® BASE 4220 can be utilized as a performance booster sump-side, as it will readily mix with the currently used product in the system, if applied at a point of even mild agitation or circulation. view less | |
| MAYCO® BASE CF-74 | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE CF-74 is an oil soluble extreme pressure additive designed to replace chlorine in heavy-duty applications. It has found good success, especially in the stainless operations of deep hole drilling and turning. As MAYCO® BASE CF-74 is non-stainin...view more MAYCO® BASE CF-74 is an oil soluble extreme pressure additive designed to replace chlorine in heavy-duty applications. It has found good success, especially in the stainless operations of deep hole drilling and turning. As MAYCO® BASE CF-74 is non-staining to the yellow metals, it also can be used on both sides, (cutting and lube) of automatic screw machines. It is recommended to replace chlorine in a cutting oil on a one for one basis with MAYCO® BASE CF-74. An example would be 4% of a 50% chlorinated paraffin in a cutting oil, yielding a total of 2% chlorine would be replaced by 2% of MAYCO® BASE CF-74. Successful replacements of up to 15% chlorine have been achieved in cutting oils. view less | |
| MAYCO® BASE CF-95 | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE CF-95 is a low odor, oil soluble extreme pressure additive designed to replace chlorine in heavy-duty applications. Such applications include gun drilling, grinding, deep hole drilling, and wire drawing as well as all stainless operations. Bec...view more MAYCO® BASE CF-95 is a low odor, oil soluble extreme pressure additive designed to replace chlorine in heavy-duty applications. Such applications include gun drilling, grinding, deep hole drilling, and wire drawing as well as all stainless operations. Because MAYCO® BASE CF-95 contains active sulfur, it is not recommended for use in products destined for applications on any yellow metal (copper, brass & bronze). It is recommended to replace chlorine in a cutting oil on a one for one basis with MAYCO® BASE CF-95. An example would be 4% of a 50% chlorinated paraffin in a cutting oil; yielding a total of 2% chlorine would be replaced by 2% of MAYCO® BASE CF-95. Successful replacements of up to 20% chlorine have been achieved in cutting oils. view less | |
| MAYCO® BASE RP 8708 | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE RP 8708 is a corrosion inhibitor formulated for use in synthetic and semi-synthetic metalworking coolants. It can be utilized in both oil-absorbing and oil-rejecting synthetic fluid types and is completely water soluble in all proportions. MAY...view more MAYCO® BASE RP 8708 is a corrosion inhibitor formulated for use in synthetic and semi-synthetic metalworking coolants. It can be utilized in both oil-absorbing and oil-rejecting synthetic fluid types and is completely water soluble in all proportions. MAYCO® BASE RP 8708 can be formulated into process protection synthetic rust preventatives, rust inhibitors for sump side addition(1 qt per 100gal), or inhibition packages for semi-synthetics and synthetics. view less | |
| MAYCO® BASE RP 8717 | Dover Chemical Corporation - Lubricant Additives | MAYCO® BASE RP 8717 is a corrosion inhibitor designed for use in synthetic and semi-synthetic metalworking coolants. It can be utilized in both oil-absorbing and oil-rejecting synthetic fluid types. It is completely water soluble and the resulting residue...view more MAYCO® BASE RP 8717 is a corrosion inhibitor designed for use in synthetic and semi-synthetic metalworking coolants. It can be utilized in both oil-absorbing and oil-rejecting synthetic fluid types. It is completely water soluble and the resulting residue after evaporation has a very light colored transparent appearance and exhibits a soft fluid film. MAYCO® BASE RP 8717 exhibits excellent rust protection, hard water stability, and bioresistance. In order to take full advantage of the additive’s bio-resistant effects, MAYCO® BASE RP 8717 should be incorporated into the final metalworking coolant at 12-15% by weight. view less |
