UL Prospector

Success!

Successfully saved your search

Univar Solutions

Visit Company Website
In chemical and ingredient distribution, Univar Solutions stands apart—not only for our global leadership and unmatched brand portfolio, but also for our collaborative, solutions-oriented approach to solving your challenges. With Univar Solutions, customers and suppliers gain a committed ally with the capabilities to help their businesses run smoothly, and the expertise to help them anticipate, navigate and leverage meaningful growth opportunities.
A-C® 1660 Univar Solutions A-C® 1660 is high melt temperature, hard polypropylene (PP) homopolymer for use in solvent borne coatings and hot melt adhesives to improve surface properties (drag) and heat resistance.
A-C® 1702 Univar Solutions A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by...view more A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. view less
A-C® 1754 Univar Solutions A-C® 1754 is a polypropylene homopolymer.
A-C® 316A Univar Solutions A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion re...view more A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
A-C® 325 Univar Solutions A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
A-C® 330 Univar Solutions A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
A-C® 392 Univar Solutions A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...view more A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. view less
A-C® 3A Univar Solutions A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the sur...view more A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the surface and therefore improving mar and abrasion resistance. . view less
A-C® 400 Univar Solutions A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appli...view more A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. view less
A-C® 405M Univar Solutions A-C® 405M is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats.
A-C® 405T Univar Solutions A-C® 405T is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats.
A-C® 415 Univar Solutions A-C® 415 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 15%, developed specifically to be used as an adhesive flooding compound between the cable bundle and extruded outer jacket in the manufacturing of cables. .
A-C® 5120 Univar Solutions A-C® 5120 is ethylene acrylic acid copolymer in a prill form, with an acrylic acid content of 15%, promotes adhesion to various substrates, and rheology control for solventborne coatings.
A-C® 540 Univar Solutions A-C® 540 is ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation.
A-C® 540A Univar Solutions A-C® 540A is ethylene acrylic acid (EAA) copolymer in a powder form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation.
A-C® 573P Univar Solutions A-C® 573P is ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid content of 10%, improves adhesion to various substrates, provides rheology control for solvent borne coatings along with providing metallic flake orientation.
A-C® 596P Univar Solutions A-C® 596P is Propylene Maleic Anhydride Copolymer, with a SAP # of 50, in pastille form, provides non polar and polar characteristics which boost adhesion while maintaining oxadative stability.
A-C® 6 Univar Solutions A-C® 6 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as ...view more A-C® 6 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. It is also used as a gellant for hydrocarbon oils, a paraffin crystal nucleator in wax blends such as candles, and a viscosity diluent in HMAs. Can also be partially substituted for FT (Fisher Tropsch) Wax in adhesive applications without detracting from formulation properties. Used in cable flooding compounds, along with polybutene. view less
A-C® 617 Univar Solutions A-C® 617 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
A-C® 617A Univar Solutions A-C® 617A is low density polyethylene (LDPE) homopolymer in a powder form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
A-C® 629 Univar Solutions A-C® 629 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 629 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
A-C® 629A Univar Solutions A-C® 629A is low density Oxidized Polyethylene homopolymer in powder form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lo...view more A-C® 629A is low density Oxidized Polyethylene homopolymer in powder form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
A-C® 656 Univar Solutions A-C® 656 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 656 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
A-C® 6702 Univar Solutions A-C® 6702 is grease like, low temperature, completely amorphous, Low density Oxidized Polyethylene Homopolymer which can be emulsified for use in aqueous systems, for applications such as mold release and lubricants.
A-C® 680 Univar Solutions A-C® 680 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lowe...view more A-C® 680 is low density Oxidized Polyethylene homopolymer in prill form for use in solvent borne coatings as a rheological aid but also be atmospherically emulsified for use in aqueous applications, such as textiles, lubricants, coatings and inks, to lower the COF and provide surface properties such as mar & abrasion resistance and increased slip. view less
A-C® 6A Univar Solutions A-C® 6A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
A-C® 725 Univar Solutions A-C® 725 is low density polyethylene (LDPE) Homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. .
A-C® 725P Univar Solutions A-C® 725P is low density polyethylene (LDPE) Homopolymer in a pastille form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF. .
A-C® 8 Univar Solutions A-C® 8 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
A-C® 820A Univar Solutions A-C® 820A is very low viscosity, medium density polyethylene (PE) homopolymer for use in solvent borne coatings, in heatset and liquid solvent borne inks to improve mar & abrasion (rub resistance) by lowering COF(Increasing slip).
A-C® 8A Univar Solutions A-C® 8A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
A-C® 9 Univar Solutions A-C® 9 is low density polyethylene (LDPE) homopolymer in a prill form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
A-C® 9A Univar Solutions A-C® 9A is low density polyethylene (LDPE) homopolymer in a powdered form, for use in solvent borne coatings, heatset and liquid solvent borne inks, to improve surface properties such as rub, mar & abrasion resistance, by lowering the COF.
Climax Ammonium Dimolybdate (ADM) Univar Solutions Climax Ammonium Dimolybdate (ADM) is a high purity molybdate. It is one of several compounds described as ammonium molybdate. Other product names used to describe ADM are molydbic acid 85%, molydbic acid, and ammonium polymolybdate. Ammonium Dimolybdate i...view more Climax Ammonium Dimolybdate (ADM) is a high purity molybdate. It is one of several compounds described as ammonium molybdate. Other product names used to describe ADM are molydbic acid 85%, molydbic acid, and ammonium polymolybdate. Ammonium Dimolybdate is distinguished by low trace element concentration and water solubility at 25ºC (77ºF) and 43g/100cm3. view less
Climax Ferromolybdenum 65/75 Univar Solutions Ferromolybdenum 65/75 can be used in any melting process to add Molybdenum to all types of iron and steel, and is supplied in a range of sizes for furnace or ladle addition. The recovery should be substantially 100 % if used correctly. For optimum recover...view more Ferromolybdenum 65/75 can be used in any melting process to add Molybdenum to all types of iron and steel, and is supplied in a range of sizes for furnace or ladle addition. The recovery should be substantially 100 % if used correctly. For optimum recoveries with ladle additions, Ferromolybdenum should be added after the molten metal has covered the bottom of the ladle and before it is three quarters full. Climax also offers Roasted Molybdenite Concentrates in powder as well as in briquetted form. view less
Climax Microfine® AO3 Univar Solutions Climax Microfine® AO3 is a sub-micron particle size antimony trioxide with an average particle size of 0.3 microns. This product is produced under very carefully controlled conditions to ensure not only a very fine and consistent average particle size but...view more Climax Microfine® AO3 is a sub-micron particle size antimony trioxide with an average particle size of 0.3 microns. This product is produced under very carefully controlled conditions to ensure not only a very fine and consistent average particle size but also a narrow particle size distribution with the absolute minimum of coarser particles above one micron. The product is predominantly senarmontite (cubic crystal form), with a high tinting strength and a bright white powder color. This product is available in both standard and high purity grades designated Climax Microfine AO3 and Climax Microfine AO3–HP respectively. view less
Climax Microfine® AO3-HP Univar Solutions Climax Microfine® AO3-HP is a sub-micron particle size antimony trioxide with an average particle size of 0.3 microns. This product is produced under very carefully controlled conditions to ensure not only a very fine and consistent average particle size ...view more Climax Microfine® AO3-HP is a sub-micron particle size antimony trioxide with an average particle size of 0.3 microns. This product is produced under very carefully controlled conditions to ensure not only a very fine and consistent average particle size but also a narrow particle size distribution with the absolute minimum of coarser particles above one micron. The product is predominantly senarmontite (cubic crystal form), with a high tinting strength and a bright white powder color. This product is available in both standard and high purity grades designated Climax Microfine AO3 and Climax Microfine AO3–HP respectively. view less
Climax Molysulfide® Super Fine Univar Solutions Climax Molysulfide® Super Fine is a lubricant grade of molybdenum disulfide (M0S2).
Climax Molysulfide® Technical Univar Solutions Climax Molysulfide® Technical is a lubricant grade of molybdenum disulfide (M0S2).
Climax Molysulfide® Technical Fine Univar Solutions Climax Molysulfide® Technical Fine is a lubricant grade of molybdenum disulfide (M0S2).
Climax Pure Molybdic Oxide (POC) Univar Solutions Climax Pure Molybdic Oxide (POC) is produced by a wet chemical process which provides a purity level of 99.99% MoOc. POC is characterized by low trace element concentrations, silicone, sulfur, and tin levels are particularly low.
Climax Roasted Molybdenite Concentrate Univar Solutions Climax Roasted Molybdenite Concentrate is used to add molybdenum to steel produced in the electric arc furnace. The material may be added to the charge or to the molten bath. For the adjustment of the final analysis the use of Roasted Molybdenite Concentr...view more Climax Roasted Molybdenite Concentrate is used to add molybdenum to steel produced in the electric arc furnace. The material may be added to the charge or to the molten bath. For the adjustment of the final analysis the use of Roasted Molybdenite Concentrate is not recommended. For optimum recovery the following should be observed: If added with the charge the Roasted Molybdenite Concentrate containing packages should always be covered with scrap or liquid metal. If added to the bath, the product should be introduced under the slag level. If used in the electric arc furnace direct contact with the electrodes should be avoided. view less
Climax Roasted Molybdenite Concentrate Carbon Free Briquettes (CFB) Univar Solutions Climax Roasted Molybdenite Concentrate Carbon Free Briquettes (CFB) are used to add Molybdenum to steel and iron. They are especially designed for use in automatic handling equipment such as conveyer belts, hoppers and bins. The briquetted product is used...view more Climax Roasted Molybdenite Concentrate Carbon Free Briquettes (CFB) are used to add Molybdenum to steel and iron. They are especially designed for use in automatic handling equipment such as conveyer belts, hoppers and bins. The briquetted product is used to greatest advantage in overcoming furnace conditions under which excessive mechanical losses might be encountered. Additions of carbon free briquettes are typically made to the molten bath of electric arc furnaces or AOD vessels. If used in the electric furnace direct contact with the electrodes should be avoided. For optimum recovery it should be observed that the product gets immediate direct contact with the molten metal. For adjustment of final analysis the use of Molybdenum Oxide Carbon Free Briquettes is only recommended if subsequent metallurgical work follows the addition of the alloy. view less
Climax Sodium Molybdate Dihydrate (SMC) Univar Solutions Climax Sodium Molybdate Dihydrate (SMC) as represented by the formula Na2MoO4 · 2H2O. Water loss and decomposition starts at approximately 100ºC (212ºF) and subsequent anhydrous form melts at 686ºC (1267ºF). It is a white free flowing crystalline solid wi...view more Climax Sodium Molybdate Dihydrate (SMC) as represented by the formula Na2MoO4 · 2H2O. Water loss and decomposition starts at approximately 100ºC (212ºF) and subsequent anhydrous form melts at 686ºC (1267ºF). It is a white free flowing crystalline solid with a bulk density (Scott) of approximately 17g/in3. view less
Climax Sublimed Pure Molybdic Oxide (POS) Univar Solutions Climax Sublimed Pure Molybdic Oxide (POS) is produced by sublimation process which provides a purity level of 99.90% or higher. It is characterized by a very low trace element concentration of alkali metals.
Hostacor® 1435-A Univar Solutions Hostacor® 1435-A is a DEA free fatty acid alkanolamide that can be used as a corrosion inhibitor, lubricant, and secondary emulsifier for aqueous metalworking fluids.
Hostacor® AL Univar Solutions Hostacor® AL is a phosphorous-free, water-dispersible corrosion inhibitor based on 100% renewable feedstocks recommended for steel-and aluminum cutting & grinding emulsions. The product has a low foaming tendency and contributes significantly to lubricati...view more Hostacor® AL is a phosphorous-free, water-dispersible corrosion inhibitor based on 100% renewable feedstocks recommended for steel-and aluminum cutting & grinding emulsions. The product has a low foaming tendency and contributes significantly to lubrication while at the same time reduces cobalt leaching. Hostacor® AL can also be added to existing metal working fluids for steel to upgrade them for machining aluminum. view less
Hostacor® IT Univar Solutions Hostacor® IT is a pre-neutralized, low foaming corrosion inhibitor mainly used in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S). Hostacor® IT is an excellent corrosion inhibitors for steel and show very go...view more Hostacor® IT is a pre-neutralized, low foaming corrosion inhibitor mainly used in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S). Hostacor® IT is an excellent corrosion inhibitors for steel and show very good hard water stability. It can be used alsone or in combination with other water-soluble corrosion inhibitors or lubricants. view less
Hostagliss® L4 Univar Solutions Hostagliss® L4 is a complex ester and used as lubricity improver and water-dispersable corrosion inhibitor for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions. Hostagliss® L4 is a...view more Hostagliss® L4 is a complex ester and used as lubricity improver and water-dispersable corrosion inhibitor for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions. Hostagliss® L4 is also listed on the “Lubricant Substance Classification list (LuSC). Thus suitable for lubricants with European Ecolabel certification. view less
Hostaphat® 1322 Univar Solutions Hostaphat® 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rol...view more Hostaphat® 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rolling oils. view less
LEXOLUBE® IPO Univar Solutions Lexolube® IPO is a long chain fatty isopropyl ester. Isopropyl esters are partially blocked by carbons atoms so they are less likely to degrade by reacting with water.
LEXOLUBE® POE-220HT Univar Solutions Lexolube® POE-HT are polyol esters based upon dipentaerythritol chemistry, and therefore are optimal in terms of oxidation resistance. They are useful as base oils for most applications requiring high temperature stability.
Lexolube® 2I-214 Univar Solutions Lexolube® 2I-214 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring hig...view more Lexolube® 2I-214 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils. view less
Lexolube® 2X-109 Univar Solutions Lexolube® 2X-109 is a clear, diester adipate fluid that is useful as a base oil requiring good low temperature flow properties. As an additive, it provides solvency and detergency. Lexolube® diester is used to improve additive solubility and is also usefu...view more Lexolube® 2X-109 is a clear, diester adipate fluid that is useful as a base oil requiring good low temperature flow properties. As an additive, it provides solvency and detergency. Lexolube® diester is used to improve additive solubility and is also useful to swell gearbox seals. This product provides oxidation resistance, low temperature fluidity, high quality, high solvency, and low volatility in textile oil, compressor oils, gear oils, 4-stroke oils, and 2-stroke oil applications. view less
Lexolube® 3N-310 Univar Solutions Lexolube® 3N-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring hig...view more Lexolube® 3N-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils. view less
Lexolube® CG-3000 Univar Solutions Lexolube® CG-3000 is an environmentally friendly, high viscosity synthetic complex ester especially suited as a thickener and co-base oil with vegetable oils. It allows great flexibility to blend high performance vegetable based lubricants to ISO VG 320 a...view more Lexolube® CG-3000 is an environmentally friendly, high viscosity synthetic complex ester especially suited as a thickener and co-base oil with vegetable oils. It allows great flexibility to blend high performance vegetable based lubricants to ISO VG 320 and above. Lexolube® CG-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. With greater than 65% renewable content and high biodegradability, Lexolube® CG-3000 is a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP). view less
Lexolube® CP-460LC Univar Solutions Lexolube® CP-460LC is a clear complex polyol ester that is 84% carbon bio-based. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a base oil f...view more Lexolube® CP-460LC is a clear complex polyol ester that is 84% carbon bio-based. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a base oil for most applications requiring high temperature stability. It features oxidation resistance, metal protection, and thermal stability. It also has a high flash point, low deposits, and additive compatibility. view less
Lexolube® CQ-3000 Univar Solutions Lexolube® CQ-3000 is an environmentally friendly, high viscosity synthetic complex ester engineered for superior thermal and oxidative stability. It is compatible with other synthetic esters, PAO and mineral oils. It can be used as a viscosity modifier, w...view more Lexolube® CQ-3000 is an environmentally friendly, high viscosity synthetic complex ester engineered for superior thermal and oxidative stability. It is compatible with other synthetic esters, PAO and mineral oils. It can be used as a viscosity modifier, while also improving performance in high temperature lubricant applications that exceed 200°C. Lexolube® CQ-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. Lexolube® CQ-3000 is a USDA Certified Biobased Product. view less
Lexolube® FG-220 HX1 Univar Solutions Lexolube® FG HX1 fluids are high performance synthetic polyol ester base oils for the food processing industries. They achieve the NSF International HX-1 ranking for use in and around food processing areas.
Lexolube® HS-S Univar Solutions Lexolube® HS-S is a patented, hydrolytically stable ester fluid that is well suited for use in water-based metalworking fluids.
Lexolube® NBS Univar Solutions Lexolube® NBS is a long chain fatty acid ester that provides excellent metal adhesion and a substantially lubricious film. It may be used as an oiliness additive for a broad range of metalworking applications
Lexolube® T-110 Univar Solutions Lexolube® T-110 is a long chain fatty acid ester that provides excellent metal adhesion and a substantially lubricious film. It may be used as an oiliness additive for a broad range of metalworking applications
Lubricit 2-EHL Univar Solutions Lubricit 2-EHL is a patented, hydrolytically stable ester fluid that is well suited for use in water-based metalworking fluids.
Lubricit DIDA Univar Solutions Lubricit DIDA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, r...view more Lubricit DIDA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life. view less
Lubricit TMP C18 Univar Solutions Lubricit TMP C18 is an oleic acid based polyol ester. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol backbone provides good hydrolytic and thermal stability, making is the best choice for hydrau...view more Lubricit TMP C18 is an oleic acid based polyol ester. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol backbone provides good hydrolytic and thermal stability, making is the best choice for hydraulic fluids, gear oils, and metalworking applications. view less
Lubricit TMP C9 Univar Solutions Lubricit TMP C9 is a polyol fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties.
PB10 Univar Solutions PB10 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...view more PB10 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PB122 Univar Solutions PB122 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film,...view more PB122 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PB124 Univar Solutions PB124 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film,...view more PB124 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PB128 Univar Solutions PB128 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film,...view more PB128 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PB16 Univar Solutions PB16 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...view more PB16 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PB18 Univar Solutions PB18 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...view more PB18 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PB24 Univar Solutions PB24 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...view more PB24 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PB32 Univar Solutions PB32 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...view more PB32 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PB6 Univar Solutions PB6 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, w...view more PB6 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PB8 Univar Solutions PB8 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, w...view more PB8 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. view less
PIBSA 1000HR Univar Solutions PIBSA 1000HR is reacted from 1000 molecular weight highly reactive polyisobutylene. PIBSA 1000HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...view more PIBSA 1000HR is reacted from 1000 molecular weight highly reactive polyisobutylene. PIBSA 1000HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
PIBSA 1300HR Univar Solutions PIBSA 1300HR is reacted from 1300 molecular weight highly reactive polyisobutylene. PIBSA 1300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...view more PIBSA 1300HR is reacted from 1300 molecular weight highly reactive polyisobutylene. PIBSA 1300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
PIBSA 2300HR Univar Solutions PIBSA 2300HR is reacted from 2300 molecular weight highly reactive polyisobutylene. PIBSA 2300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...view more PIBSA 2300HR is reacted from 2300 molecular weight highly reactive polyisobutylene. PIBSA 2300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
PIBSA 450HR Univar Solutions PIBSA 450HR is reacted from 450 molecular weight highly reactive polyisobutylene. PIBSA 450HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfact...view more PIBSA 450HR is reacted from 450 molecular weight highly reactive polyisobutylene. PIBSA 450HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
PIBSA 750HR Univar Solutions PIBSA 750HR is reacted from 750 molecular weight highly reactive polyisobutylene. PIBSA 750HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfact...view more PIBSA 750HR is reacted from 750 molecular weight highly reactive polyisobutylene. PIBSA 750HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. view less
PIBSI E1 1.0 Univar Solutions PIBSI E1 1.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.0%. PIBSI E1 1.0 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI E1 1.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.0%. PIBSI E1 1.0 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI E1 1.0 have common applications in a broad range of fuel and lubricants. view less
PIBSI E1 1.2 Univar Solutions PIBSI E1 1.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.2%. PIBSI E1 1.2 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI E1 1.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.2%. PIBSI E1 1.2 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI E1 1.2 have common applications in a broad range of fuel and lubricants. view less
PIBSI F1 2.0 Univar Solutions PIBSI F1 2.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 2.0%. PIBSI F1 2.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI F1 2.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 2.0%. PIBSI F1 2.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 2.0 have common applications in a broad range of fuel and lubricants. view less
PIBSI F1 3.2 Univar Solutions PIBSI F1 3.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.2%. PIBSI F1 3.2 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI F1 3.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.2%. PIBSI F1 3.2 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 3.2 have common applications in a broad range of fuel and lubricants. view less
PIBSI F1 3.9 Univar Solutions PIBSI F1 3.9 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.9%. PIBSI F1 3.9 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI F1 3.9 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.9%. PIBSI F1 3.9 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 3.9 have common applications in a broad range of fuel and lubricants. view less
PIBSI F2 5.0 Univar Solutions PIBSI F2 5.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 5.0%. PIBSI F2 5.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...view more PIBSI F2 5.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 5.0%. PIBSI F2 5.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F2 5.0 have common applications in a broad range of fuel and lubricants. view less
RB PAO 2 cSt Univar Solutions RB PAO 2 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in low viscosity compressor oils, hydraulic fluid, refrigeration lubricants, transmission fluids, synthetic carrier fluids, synthetic viscosity adjustment, cold cran...view more RB PAO 2 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in low viscosity compressor oils, hydraulic fluid, refrigeration lubricants, transmission fluids, synthetic carrier fluids, synthetic viscosity adjustment, cold crank reduction, and specialty industrial fluids. view less
RB PAO 4 cSt Univar Solutions RB PAO 4 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fl...view more RB PAO 4 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fluids. view less
RB PAO 6 cSt Univar Solutions RB PAO 6 cSt is PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in gear oils, hydraulic fluids, compressor oils, industrial valve lubricants, synthetic greases, crank case engine oils, dust suppressants, transformer oils, cable flu...view more RB PAO 6 cSt is PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in gear oils, hydraulic fluids, compressor oils, industrial valve lubricants, synthetic greases, crank case engine oils, dust suppressants, transformer oils, cable fluids, among others. view less
RB PAO 8 cSt Univar Solutions RB PAO 8 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fl...view more RB PAO 8 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fluids. view less
TPC 1105 Univar Solutions TPC 1105 is Polyisobutene.
TPC 1160 Univar Solutions TPC 1160 is Polyisobutene.
TPC 1285 Univar Solutions TPC 1285 is Polyisobutene.
TPC 1350 Univar Solutions TPC 1350 is Polyisobutene.
TPC 175 Univar Solutions TPC 175 is Polyisobutene.
Toluene Univar Solutions Toluene is an aromatic hydrocarbon commonly used as a solvent. It is recommended for paints, paint thinners, sealants, printing inks, adhesives, and disinfectants.
XIAMETER® ACP-0001 Antifoam Compound Univar Solutions XIAMETER® ACP-0001 Antifoam Compound is a silicone foam control agent that is 100 percent active. Effective in both aqueous and nonaqueous systems, it can be used in concentrations as low as one part per million. This antifoam compound is specifically man...view more XIAMETER® ACP-0001 Antifoam Compound is a silicone foam control agent that is 100 percent active. Effective in both aqueous and nonaqueous systems, it can be used in concentrations as low as one part per million. This antifoam compound is specifically manufactured for industrial applications. Agitation of the product prior to use is required. view less
XIAMETER® OFX-0203 Fluid Univar Solutions XIAMETER® OFX-0203 Fluid is an alkylarylpolysiloxane fluid. It is compatible with most organic coatings and adhesive systems, and permits subsequent coating of fabricated parts without requiring unusual or extraordinary surface protection.
XIAMETER® OFX-0536 Fluid Univar Solutions XIAMETER® OFX-0536 Fluid is a dual functional polydimethyl-siloxane. The highly polar nature of the amino functional groups and the ability of the methoxy functional groups to cure enable a soft and glossy film to deposit and adhere strongly to leather su...view more XIAMETER® OFX-0536 Fluid is a dual functional polydimethyl-siloxane. The highly polar nature of the amino functional groups and the ability of the methoxy functional groups to cure enable a soft and glossy film to deposit and adhere strongly to leather surfaces. view less