| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...Vea Mas 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. Vea Menos | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...Vea Mas 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. Vea Menos | |
| 3-Chloropropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-cloropropilmetildimetoxisilano es un agente de acoplamiento etoxi-funcional de cloro que hierve entre 70-72 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi y caucho halogenado para materiales de carga tratados con el fin de promov...Vea Mas 3-cloropropilmetildimetoxisilano es un agente de acoplamiento etoxi-funcional de cloro que hierve entre 70-72 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi y caucho halogenado para materiales de carga tratados con el fin de promover las propiedades, o se utiliza como agente de reticulación para RTV. 3-cloropropilmetildimetoxisilano es también la materia prima para otros silanos órgano-funcionales con metildimetoxi. Vea Menos | Request Sample |
| 3-Chloropropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-cloropropiltrietoxisilano es un agente de acoplamiento etoxi-funcional de cloro que hierve a 220 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi y caucho halogenado para materiales de carga tratados con el fin de promover las prop...Vea Mas 3-cloropropiltrietoxisilano es un agente de acoplamiento etoxi-funcional de cloro que hierve a 220 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi y caucho halogenado para materiales de carga tratados con el fin de promover las propiedades, o se utiliza como agente de reticulación para RTV. 3-cloropropiltrietoxisilano es también el material intermedio clave de otros silanos órgano-funcionales con trietoxi. Vea Menos | Request Sample |
| 3-Chloropropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-cloropropiltriimetoxisilano es un agente de acoplamiento metoxi-funcional de cloro que hierve a 192 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi con el fin de promover las propiedades, o que se utiliza como agente de reticulaci...Vea Mas 3-cloropropiltriimetoxisilano es un agente de acoplamiento metoxi-funcional de cloro que hierve a 192 ºC. Es un líquido incoloro o amarillento ligero usado en resinas epoxi con el fin de promover las propiedades, o que se utiliza como agente de reticulación para RTV. 3-cloropropiltriimetoxisilano es también un producto intermedio clave para la preparación de una variedad de amino-, mercapto-y metacriloiloxiorganosilanos que se utilizan como agentes de acoplamiento de silano. Vea Menos | Request Sample |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...Vea Mas Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. Vea Menos | |
| Boltorn™ P1000 | Perstorp | Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used ...Vea Mas Boltorn™ P1000 is a clear, liquid, low-viscosity polymer polyol allowing monomer-free formulation. It combines the low viscosity and low shrinkage with high reactivity required in applications such as UV digital printing. Boltorn™ P1000 is primarily used as acrylate oligomer for UV-curing where labelling issues are of prime importance. Vea Menos | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Polyol HA-0135LV2 es un poliol poliéster de baja cristalinidad con funcionalidad ácido hidroxilo. Al igual que DMPA® Polyol HA-0135, esta resina está diseñada para eliminar el uso de NMP como solvente en el proceso de fabricación de dispersiones de ...Vea Mas DMPA® Polyol HA-0135LV2 es un poliol poliéster de baja cristalinidad con funcionalidad ácido hidroxilo. Al igual que DMPA® Polyol HA-0135, esta resina está diseñada para eliminar el uso de NMP como solvente en el proceso de fabricación de dispersiones de poliuretano. Este producto proporciona una mayor concentración de hidroxilo, mayor dureza del revestimiento y resistencia química. Presenta baja cristalinidad y permite facilidad de manejo a temperaturas inferiores. DMPA® Polyol HA-0135LV2 tiene un valor hidroxilo de 330 a 345 mg KOH/g, una densidad a 25 °C de 1170 a 1200 g/l, una viscosidad a 25 °C de 172 poise y un contenido de color (APHA) de < 250 como máx. Vea Menos | |
| DOWSIL™ 3037 Intermediate | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 3037 Intermediate is a silicone resin intermediate. It is used reacted with organic resins to improve weatherability, or other silicone resins to reduce VOC and improve flexibility. | |
| DOWSIL™ 3074 Intermediate | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low ...Vea Mas Dow Corning® 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC high temperature coatings. Vea Menos | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40, una mezcla de éster etílico de diferentes ácidos polisilícicos, es, junto con el monomérico Dynasylan® A, el éster de silícico más importante a nivel industrial. Dynasylan® 40 se forma en presencia de agua de tetraetil silicato por hidrólis...Vea Mas Dynasylan® 40, una mezcla de éster etílico de diferentes ácidos polisilícicos, es, junto con el monomérico Dynasylan® A, el éster de silícico más importante a nivel industrial. Dynasylan® 40 se forma en presencia de agua de tetraetil silicato por hidrólisis parcial de los grupos etoxilo a grupos hidroxilos y su subsecuente condensación con formación de enlaces siloxanos. Dynasylan® 40 es un líquido incoloro de baja viscosidad con un contenido de SiO2 del 40%. Los ácidos polisilícicos pueden tener suficiente contenido de grupos etoxilo que se pueden activar mediante ácido o hidrólisis catalizada base. La condensación comienza incluso durante la hidrólisis, con la formación de moléculas poliméricas relativamente largas. Durante el almacenamiento de estos hidrolizados, la condensación continúa hasta que se forma un gel en el que la tasa depende del grado de hidrólisis. La acción de los hidrolizados como enlaces se basa en la continuación de la hidrólisis con la subsecuente gelificación y deshidratación para producir estructuras poliméricas SiO2. Vea Menos | |
| Dynasylan® 9165 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9165, un silano fenil-funcional, modifica la superficie de los materiales inorgánicos y es un importante componente en sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Este producto es considerado trifuncional ya que los tres grupos...Vea Mas Dynasylan® 9165, un silano fenil-funcional, modifica la superficie de los materiales inorgánicos y es un importante componente en sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Este producto es considerado trifuncional ya que los tres grupos alquílicos se pueden hidrolizar. Dynasylan® 9165 también contiene un grupo fenilo que brinda excelente estabilidad térmica y aporta flexibilidad a los sistemas de revestimiento sol-gel. Vea Menos | |
| Dynasylan® 9265 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9265, un silano fenil-funcional, modifica la superficie de los materiales inorgánicos y es un importante componente en sistemas sol-gel. Dynasylan® 9265 es un líquido incoloro de baja viscosidad. Dynasylan® 9265 es considerado trifuncional ya q...Vea Mas Dynasylan® 9265, un silano fenil-funcional, modifica la superficie de los materiales inorgánicos y es un importante componente en sistemas sol-gel. Dynasylan® 9265 es un líquido incoloro de baja viscosidad. Dynasylan® 9265 es considerado trifuncional ya que los tres grupos alquílicos se pueden hidrolizar. Dynasylan® 9265 también contiene un grupo fenilo que brinda excelente estabilidad térmica y aporta flexibilidad a los sistemas de revestimiento sol-gel. . Vea Menos | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A, el ester etílico de ácido ortosilícico es el tetra alquil silicato más importante en la industria. En la bibliografía se lo suele mencionar con el nombre TEOS (tetraetoxisilano). Dynasylan® A es un líquido incoloro de baja viscosidad con un ...Vea Mas Dynasylan® A, el ester etílico de ácido ortosilícico es el tetra alquil silicato más importante en la industria. En la bibliografía se lo suele mencionar con el nombre TEOS (tetraetoxisilano). Dynasylan® A es un líquido incoloro de baja viscosidad con un contenido de SiO2 del 28,5%. Para su uso se requiere hidrólisis mediante catálisis ácida o alcalina. Dado que los 4 grupos etoxilo pueden participar en esta reacción, Dynasylan® A es considerado tetrafuncional. La hidrólisis produce grupos de silanol que, en una reacción de condensación subsecuente, forman enlaces de siloxano (-Si-O-Si-). La condensación comienza antes de que se complete la hidrólisis. Durante el almacenaje continúa la condensación del hidrolizado continúa hasta que se forma un gel. La tasa de formación del gel depende de la concentración del agua. Vea Menos | |
| Dynasylan® M | Evonik Operations GmbH, BL Silanes | Dynasylan® A, el ester metílico de ácido ortosilícico, es un tetra alquil silicato cada vez más importante y más utilizado en los procesos sol-gel. En la bibliografía se lo suele mencionar con el nombre TMOS (tetrametoxisilano). Dynasylan® M es un líquido...Vea Mas Dynasylan® A, el ester metílico de ácido ortosilícico, es un tetra alquil silicato cada vez más importante y más utilizado en los procesos sol-gel. En la bibliografía se lo suele mencionar con el nombre TMOS (tetrametoxisilano). Dynasylan® M es un líquido entre incoloro y levemente amarillento de baja viscosidad con un contenido de SiO2 del 39,5%. Para su uso no se requiere hidrólisis mediante catálisis ácida o alcalina. Dynasylan® M se hidroliza fácilmente agregando agua. Dado que los 4 grupos metoxilo pueden participar en esta reacción, Dynasylan® M es considerado tetrafuncional. La hidrólisis produce grupos de silanol que, en una reacción de condensación subsecuente, forman enlaces de siloxano (-Si-O-Si-). La condensación comienza antes de que se complete la hidrólisis. Durante el almacenaje la condensación del hidrolizado continúa hasta que se forma un gel. La tasa de formación del gel depende del grado de hidrólisis. Vea Menos | |
| Dynasylan® MTES | Evonik Operations GmbH, BL Silanes | Dynasylan® MTES, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Dynasylan® MTES es un líquido incoloro de baja viscosidad. Para su uso se requiere hidrólisis mediante catálisis ácida o alcalina. Dynasylan® MTES se...Vea Mas Dynasylan® MTES, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Dynasylan® MTES es un líquido incoloro de baja viscosidad. Para su uso se requiere hidrólisis mediante catálisis ácida o alcalina. Dynasylan® MTES se considera trifuncional porque sus tres grupos alcoxi pueden participar en esta reacción. Por otra parte, Dynasylan® MTES contiene un grupo metilo que agrega un carácter orgánico a los productos. La hidrólisis genera los grupos silanol que, en una reacción de condensación subsecuente, forma enlaces siloxanos (-Si-O-Si-) muy estables. La condensación se produce paralelamente a la hidrólisis una vez que se forma cierta cantidad de grupos silanol. Las tasas de hidrólisis y condensación absolutas y relativas depende de diversos factores. Los más importantes son el pH, la concentración, el solvente, la temperatura y el catalizador. Vea Menos | |
| Dynasylan® MTMS | Evonik Operations GmbH, BL Silanes | Dynasylan® MTMS, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Dynasylan® MTMS se considera trifuncional porque sus tres grupos alcoxi pueden hirolizarse. Por otra parte, e...Vea Mas Dynasylan® MTMS, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Dynasylan® MTMS se considera trifuncional porque sus tres grupos alcoxi pueden hirolizarse. Por otra parte, este producto contiene un grupo metilo que agrega un carácter orgánico a los productos. La hidrólisis genera los grupos silanol que, en una reacción de condensación subsecuente, forma enlaces siloxanos (-Si-O-Si-) muy estables. La condensación se produce paralelamente a la hidrólisis una vez que se forma cierta cantidad de grupos silanol. Las tasas de hidrólisis y condensación absolutas y relativas depende de diversos factores. Los más importantes son el pH, la concentración, el solvente, la temperatura y el catalizador. Vea Menos | |
| Dynasylan® PTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® PTEO, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Dynasylan® PTEO se considera trifuncional porque sus tres grupos alcoxi pueden hidrolizarse. Por otra parte...Vea Mas Dynasylan® PTEO, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Dynasylan® PTEO se considera trifuncional porque sus tres grupos alcoxi pueden hidrolizarse. Por otra parte, Dynasylan® PTEO contiene un grupo propilo que agrega un carácter hidrofóbico a los revestimientos. La hidrólisis genera los grupos silanol que, en una reacción de condensación subsecuente, forma enlaces siloxanos (-Si-O-Si-) muy estables. La condensación se produce paralelamente a la hidrólisis una vez que se forma cierta cantidad de grupos silanol. Las tasas de hidrólisis y condensación absolutas y relativas depende de diversos factores. Los más importantes son el pH, la concentración, el solvente, la temperatura y el catalizador. Vea Menos | |
| Dynasylan® PTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® PTMO, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Dynasylan® PTMO se considera trifuncional porque sus tres grupos alcoxi pueden hidrolizarse. Por otra parte,...Vea Mas Dynasylan® PTMO, que es un alquiltrialcoxisilano, es un componente importante en los sistemas sol-gel. Es un líquido incoloro de baja viscosidad. Dynasylan® PTMO se considera trifuncional porque sus tres grupos alcoxi pueden hidrolizarse. Por otra parte, Dynasylan® PTEO contiene un grupo propilo que agrega un carácter hidrofóbico a los revestimientos sol-gel. La hidrólisis genera los grupos silanol que, en una reacción de condensación subsecuente, forma enlaces siloxanos (-Si-O-Si-) muy estables. La condensación se produce paralelamente a la hidrólisis una vez que se forma cierta cantidad de grupos silanol. Las tasas de hidrólisis y condensación absolutas y relativas depende de diversos factores. Los más importantes son el pH, la concentración, el solvente, la temperatura y el catalizador. Vea Menos | |
| ETERNACOLL® UC-100 | UBE Chemical Europe | ETERNACOLL® UC es el nombre comercial de UBE Industries para el 1,4-ciclohexano dimetanol basado policarbonatediol. | |
| ETERNACOLL® UH-100 | UBE Chemical Europe | ETERNACOLL® UH es la marca de la UBE Industries de 1,6-hexanodiol basado policarbonatediol. | |
| ETERNACOLL® UH-200 | UBE Chemical Europe | ETERNACOLL® UH es la marca de la UBE Industries de 1,6-hexanodiol basado policarbonatediol. | |
| ETERNACOLL® UH-300 | UBE Chemical Europe | ETERNACOLL® UH es la marca de la UBE Industries de 1,6-hexanodiol basado policarbonatediol. | |
| ETERNACOLL® UH-50 | UBE Chemical Europe | ETERNACOLL® UH es la marca de la UBE Industries de 1,6-hexanodiol basado policarbonatediol. | |
| ETERNACOLL® UHC 50-100 | UBE Chemical Europe | ETERNACOLL® UHC es el nombre comercial de lineal, alifáticos policarbonato/poliéster poliol, que es co-caprolactona polimerizado 1,6-hexanodiol basado policarbonatediol. | |
| ETERNACOLL® UHC 50-200 | UBE Chemical Europe | ETERNACOLL® UHC es el nombre comercial de lineal, alifáticos policarbonato/poliéster poliol, que es co-caprolactona polimerizado 1,6-hexanodiol basado policarbonatediol. | |
| ETERNACOLL® UM-90 (1/1) | UBE Chemical Europe | ETERNACOLL® MU es el nombre comercial de UBE Industries para copolycarbonatediol, donde dos tipos de dioles (1,4-ciclohexano dimetanol y 1,6 hexanodiol-) se aplican como componente diol. | |
| ETERNACOLL® UM-90 (1/3) | UBE Chemical Europe | ETERNACOLL® MU es el nombre comercial de UBE Industries para copolicarbonatediol, donde dos tipos de dioles (1,4-ciclohexano dimetanol y 1,6 hexanodiol-) se aplican como componente diol. | |
| ETERNACOLL® UM-90 (3/1) | UBE Chemical Europe | ETERNACOLL® MU es el nombre comercial de UBE Industries para copolycarbonatediol, donde dos tipos de dioles (1,4-ciclohexano dimetanol y 1,6 hexanodiol-) se aplican como componente diol. | |
| Hartben MC 53 | Benasedo | Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G....Vea Mas Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G.H.] maximum of 3, an NCO of 6.0-6.5%, and a free monomer of 1% maximum. Vea Menos | Request Sample |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| Hydrorene AW 1 | S.A.P.I.C.I. SpA | Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives. | |
| JEFFSOL® Ethylene Carbonate | Huntsman Performance Products | JEFFSOL® Ethylene Carbonate is an excellent solvent for many organic and inorganic materials in such applications as surface coatings, dyes, fibers, plastics, and batteries. It is also an excellent reactive intermediate for selective alkoxylation, transes...Vea Mas JEFFSOL® Ethylene Carbonate is an excellent solvent for many organic and inorganic materials in such applications as surface coatings, dyes, fibers, plastics, and batteries. It is also an excellent reactive intermediate for selective alkoxylation, transesterification, and carbamate formation. Vea Menos | |
| JEFFSOL® Glycerine Carbonate | Huntsman Performance Products | JEFFSOL® Glycerine Carbonate is a renewable, hydroxyl-functional carbonate having a biobased content of about 76%. Its hydroxyl functionality allows it to participate in a number of reactive processes in addition to the already exhaustive list for which s...Vea Mas JEFFSOL® Glycerine Carbonate is a renewable, hydroxyl-functional carbonate having a biobased content of about 76%. Its hydroxyl functionality allows it to participate in a number of reactive processes in addition to the already exhaustive list for which simple alkyl-substituted alkylene carbonates find use. Vea Menos | |
| JEFFSOL® Propylene Carbonate | Huntsman Performance Products | JEFFSOL® Propylene Carbonate is an excellent solvent for many organic and inorganic materials in such applications as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons, and natural gas. A gellant for clays and a binder...Vea Mas JEFFSOL® Propylene Carbonate is an excellent solvent for many organic and inorganic materials in such applications as surface cleaners, degreasers, dyes, fibers, plastics, batteries, aromatic hydrocarbons, and natural gas. A gellant for clays and a binder for foundry sand moulds. Vea Menos | |
| KURARAY POLYOL C-1090 | Kuraray Europe GmbH | Es un grado súper hidrolizado de copolímero del etileno-vinilo de alcohol soluble en agua que logra la compatibilidad de la resistencia al agua y la estabilidad de la viscosidad. | |
| KURARAY POLYOL C-2090 | Kuraray Europe GmbH | Un nuevo polímero soluble en agua que proporciona buena resistencia al agua y suficiente estabilidad de la viscosidad de su solución acuosa. | |
| KURARAY POLYOL C-3090 | Kuraray Europe GmbH | Un nuevo polímero soluble en agua que proporciona una buena resistencia al agua y a suficiente estabilidad de la viscosidad de su solución acuosa. | |
| KURARAY POLYOL P-1010 | Kuraray Europe GmbH | Poliol líquido de policarbonato que soporta sus nuevos proyectos de: revestimiento de cuero de alta calidad, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del u...Vea Mas Poliol líquido de policarbonato que soporta sus nuevos proyectos de: revestimiento de cuero de alta calidad, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del uretano. Vea Menos | |
| KURARAY POLYOL P-1011 | Kuraray Europe GmbH | Poliol líquido del policarbonato el cual utiliza sus nuevos proyectos: capa de cuero de alta calidad, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del uretano...Vea Mas Poliol líquido del policarbonato el cual utiliza sus nuevos proyectos: capa de cuero de alta calidad, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del uretano. Vea Menos | |
| KURARAY POLYOL P-1012 | Kuraray Europe GmbH | Poliol líquido del policarbonato del cual utiliza sus nuevos proyectos: capa de cuero de gama alta, capa dura que se quiebra-menos/floreciente-menos de la Poliuretano sustancia-resistente, emulsión a estrenar del uretano, acrilato flexible del uretano. | |
| KURARAY POLYOL P-1020 | Kuraray Europe GmbH | Poliol no cristalino de poliéster y de viscosidad baja de los cuales utiliza sus nuevos proyectos: Poliuretano de dos componentes con el Poliuretano nto bajo/menos VOC (Compuesto Organico Volatil), claro y revestimiento transparente, TPoliuretano suave...Vea Mas Poliol no cristalino de poliéster y de viscosidad baja de los cuales utiliza sus nuevos proyectos: Poliuretano de dos componentes con el Poliuretano nto bajo/menos VOC (Compuesto Organico Volatil), claro y revestimiento transparente, TPoliuretano suave sin el plastificante, acrilato flexible de uretano, modificación de la resina del poliéster. Vea Menos | |
| KURARAY POLYOL P-2010 | Kuraray Europe GmbH | Poliol líquido del poliéster el cual utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión del uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-2011 | Kuraray Europe GmbH | Poliol líquido del poliéster el cual utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-2012 | Kuraray Europe GmbH | Poliol de poliéster de tereftalato de MPD que es adecuado para: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-2020 | Kuraray Europe GmbH | Poliol no cristalino del poliéster de viscosidad baja que utiliza sus nuevos proyectos: Poliuretano de dos componentes con el Poliuretano nto bajo/menos VOC (Compuesto Organico Volatil), claro y revestimiento transparente, TPoliuretano suave sin plasti...Vea Mas Poliol no cristalino del poliéster de viscosidad baja que utiliza sus nuevos proyectos: Poliuretano de dos componentes con el Poliuretano nto bajo/menos VOC (Compuesto Organico Volatil), claro y revestimiento transparente, TPoliuretano suave sin plastificante, acrilato flexible de uretano, modificación de la resina del poliéster. Vea Menos | |
| KURARAY POLYOL P-3010 | Kuraray Europe GmbH | Poliol líquido de poliéster que utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-4010 | Kuraray Europe GmbH | Poliol líquido del poliéster que utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| KURARAY POLYOL P-5010 | Kuraray Europe GmbH | Poliol líquido del poliéster que utiliza sus nuevos proyectos: Poliuretano resistente pero suave, agente adhesivo potente, nuevo tipo de emulsión de uretano, acrilato flexible de uretano. | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...Vea Mas MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. Vea Menos | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...Vea Mas MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. Vea Menos | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...Vea Mas MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. Vea Menos | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...Vea Mas MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. Vea Menos | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...Vea Mas MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. Vea Menos | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...Vea Mas MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. Vea Menos | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...Vea Mas MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. Vea Menos | |
| Nippollan 1004 | Tosoh Corporation | Nippollan 1004, in the form of a pale yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 1100 | Tosoh Corporation | Nippollan 1100, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining wit...Vea Mas Nippollan 1100, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, metal, and adhesives. Vea Menos | |
| Nippollan 121E | Tosoh Corporation | Nippollan 121E, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining wit...Vea Mas Nippollan 121E, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, and metal. Vea Menos | |
| Nippollan 125P | Tosoh Corporation | Nippollan 125P, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining wit...Vea Mas Nippollan 125P, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, and metal. Vea Menos | |
| Nippollan 131 | Tosoh Corporation | Nippollan 131, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with...Vea Mas Nippollan 131, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, metal, and adhesives. Vea Menos | |
| Nippollan 136 | Tosoh Corporation | Nippollan 136, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 141 | Tosoh Corporation | Nippollan 141, in the form of a yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 152 | Tosoh Corporation | Nippollan 152, in the form of a pale yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 163 | Tosoh Corporation | Nippollan 163, in the form of a pale yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 164 | Tosoh Corporation | Nippollan 164, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 179P | Tosoh Corporation | Nippollan 179P, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining wit...Vea Mas Nippollan 179P, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, and metal. Vea Menos | |
| Nippollan 3027 | Tosoh Corporation | Nippollan 3027, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4002 | Tosoh Corporation | Nippollan 4002, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4009 | Tosoh Corporation | Nippollan 4009, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4010 | Tosoh Corporation | Nippollan 4010, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4040 | Tosoh Corporation | Nippollan 4040, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4042 | Tosoh Corporation | Nippollan 4042, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4073 | Tosoh Corporation | Nippollan 4073, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 5018 | Tosoh Corporation | Nippollan 5018, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 5035 | Tosoh Corporation | Nippollan 5035, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 800 | Tosoh Corporation | Nippollan 800, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with...Vea Mas Nippollan 800, in the form of a pale yellow liquid, is polyester polyols that is synthesized from the combination of aromatic or aliphatic carboxylic acids and many kinds of glycols. An extensive range of coating resins can be obtained when combining with Coronate® HX, HL, or L and its applications include coatings for plastic, wood, metal, and adhesives. Vea Menos | |
| Nippollan 963 | Tosoh Corporation | Nippollan 963, in the form of a clear liquid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastomers, an...Vea Mas Nippollan 963, in the form of a clear liquid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastomers, and more. Vea Menos | |
| Nippollan 964 | Tosoh Corporation | Nippollan 964, in the form of a clear liquid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastomers, an...Vea Mas Nippollan 964, in the form of a clear liquid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastomers, and more. Vea Menos | |
| Nippollan 980R | Tosoh Corporation | Nippollan 980R, in the form of a white solid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastomers, an...Vea Mas Nippollan 980R, in the form of a white solid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastomers, and more. Vea Menos | |
| Nippollan 981 | Tosoh Corporation | Nippollan 981, in the form of a white solid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastomers, and...Vea Mas Nippollan 981, in the form of a white solid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastomers, and more. Vea Menos | |
| Nippollan 982R | Tosoh Corporation | Nippollan 982R, in the form of a pale yellow liquid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastom...Vea Mas Nippollan 982R, in the form of a pale yellow liquid, is a polycarbonate diol (PCD) that possess good water resistance, durability, weather resistance, and heat resistance by combination with isocyanates. It has applications in coatings, adhesives, elastomers, and more. Vea Menos | |
| Ongronat® 1080 | BorsodChem Rt. | Ongronat® 1080 is a mixture of 2-methyl-m-phenylene diisocyanate and 4-methyl-m-phenylene diisocyanate in a 4:1 ratio. This product appears as a transparent liquid at room temperature. It can be used as a coating, and as adhesives and sealants. It feat...Vea Mas Ongronat® 1080 is a mixture of 2-methyl-m-phenylene diisocyanate and 4-methyl-m-phenylene diisocyanate in a 4:1 ratio. This product appears as a transparent liquid at room temperature. It can be used as a coating, and as adhesives and sealants. It features excellent adhesion, high gloss, and durability. Vea Menos | |
| Ongronat® 1100 | BorsodChem Rt. | Ongronat® 1100 is a 4-methyl-m-phenylene diisocyanate isomer. This product appears as a transparent liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features water and stain resistance, excellent adhe...Vea Mas Ongronat® 1100 is a 4-methyl-m-phenylene diisocyanate isomer. This product appears as a transparent liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features water and stain resistance, excellent adhesion, and high gloss. Vea Menos | |
| Ongronat® 1101 | BorsodChem Rt. | Ongronat® 1101 is a 2,4 TDI (T100) resin with elevated acidity. This product appears as solid, colourless or mildly yellow crystals at 20°C, 1013 hPa, and as a colourless or mildly yellow liquid at 25°C, 1013 hPa. It can be used in paints, coatings, adh...Vea Mas Ongronat® 1101 is a 2,4 TDI (T100) resin with elevated acidity. This product appears as solid, colourless or mildly yellow crystals at 20°C, 1013 hPa, and as a colourless or mildly yellow liquid at 25°C, 1013 hPa. It can be used in paints, coatings, adhesives and sealants. This product features a slow curing speed and low reactivity. Vea Menos | |
| Ongronat® 3600 | BorsodChem Rt. | Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, che...Vea Mas Ongronat® 3600 a mixture of methylenebis(phenylisocyanate) isomers. This product appears as a solvent-free, clear and colourless liquid at room temperature. It can be used in paints, coatings, adhesives and sealants. This product features weather-, chemical- and abrasion resistance. It is very flexible, strong and durable. Vea Menos | |
| Ongronat® CO 2170 | BorsodChem Rt. | Ongronat® CO 2170 is a type of polymeric MDI with standard functionality and elevated acidity. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product feature...Vea Mas Ongronat® CO 2170 is a type of polymeric MDI with standard functionality and elevated acidity. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a construction adhesive. This product features slower curing speed and a longer pot life. Vea Menos | |
| Ongronat® CO 4050 | BorsodChem Rt. | Ongronat® CO 4050 is a mixture of MDI mixed isomers with carbodiimide-modified 4,4'-methylene diphenyl diisocyanate and additives. This product appears as a solvent-free, colourless or pale yellow, low viscosity liquid at room temperature. It can be use...Vea Mas Ongronat® CO 4050 is a mixture of MDI mixed isomers with carbodiimide-modified 4,4'-methylene diphenyl diisocyanate and additives. This product appears as a solvent-free, colourless or pale yellow, low viscosity liquid at room temperature. It can be used in construction adhesives, sealants and coatings. This product features excellent adhesion and good mechanical properties. Vea Menos | |
| Ongronat® CO 4070 | BorsodChem Rt. | Ongronat® CO 4070 is an oligomeric MDI blend. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as construction adhesives, sealants, and coatings. This product features excellent thermal insula...Vea Mas Ongronat® CO 4070 is an oligomeric MDI blend. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as construction adhesives, sealants, and coatings. This product features excellent thermal insulation and good flowability. Vea Menos | |
| Ongronat® CO 4150 | BorsodChem Rt. | Ongronat® CO 4150 is a mixture of MDI-mixed isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used in construction adhesives. This product features good wetting propertie...Vea Mas Ongronat® CO 4150 is a mixture of MDI-mixed isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used in construction adhesives. This product features good wetting properties and good adhesion capability. Vea Menos | |
| Ongronat® CO 5700 | BorsodChem Rt. | Ongronat® CO 5700 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid free from any solid precip...Vea Mas Ongronat® CO 5700 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid free from any solid precipitates. It can be used as a construction adhesive. Vea Menos | |
| Ongronat® CO 5750 | BorsodChem Rt. | Ongronat® CO 5750 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid, free from solid precipita...Vea Mas Ongronat® CO 5750 is a mixture of 4,4'-methylene diphenyl diisocyanate, its isomers, homologues, and a polyether polyol-based prepolymer. This product appears as a solvent-free, colourless, transparent or slightly opaque liquid, free from solid precipitates. It can be used as a construction adhesive. This product features high resilience bonding and good elongation properties. Vea Menos | |
| Ongronat® TR 4025 | BorsodChem Rt. | Ongronat® TR 4025 is a mixture of methylenebis(phenylisocyanate) isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a sound-dampening coating for the transport indu...Vea Mas Ongronat® TR 4025 is a mixture of methylenebis(phenylisocyanate) isomers and oligomeric MDI. This product appears as a solvent-free, dark brown, low viscosity liquid at room temperature. It can be used as a sound-dampening coating for the transport industry. This product has high durability and is very heat-resistant. Vea Menos | |
| PC-61 | Tosoh Corporation | PC-61, in the form of a pale yellow liquid, is a polycarbonate polyol that has applications in coatings, adhesives, elastomers, and more. | |
| Polurene LP 100 LV | S.A.P.I.C.I. SpA | Polurene LP 100 LV is a polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and can be used to improve the flexibility of epoxy systems. It is designed for use in adhesives. | |
| Polurene LP 100 NFF | S.A.P.I.C.I. SpA | Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...Vea Mas Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. Vea Menos | |
| Polurene LP 1810 | S.A.P.I.C.I. SpA | Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...Vea Mas Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. Vea Menos | |
| Polurene MD 60 AB | S.A.P.I.C.I. SpA | Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating t...Vea Mas Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating tendencies, resulting in a smooth surface with good brightness. It also improves adhesion on difficult substrates. Vea Menos | |
| Polurene MD 70 AE | S.A.P.I.C.I. SpA | Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good b...Vea Mas Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good brightness. It can be used in 1K barrier coatings for wood with high oil content. Vea Menos | |
| Polurgreen M 570 | S.A.P.I.C.I. SpA | Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems ...Vea Mas Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems with high solids content. It contains less than .5% TDI isocyanates. Vea Menos |
