| 1, 2-Diaminocyclohexane | Chemoxy International Ltd | 1, 2-Diaminocyclohexane is a clear liquid consisting of a mixture of cis and trans isomers used as an epoxy curing agent enhancing film hardness to promote high chemical and physical resistance properties in subsequent coatings. It has excellent resistanc...Vea Mas 1, 2-Diaminocyclohexane is a clear liquid consisting of a mixture of cis and trans isomers used as an epoxy curing agent enhancing film hardness to promote high chemical and physical resistance properties in subsequent coatings. It has excellent resistance to blush and low viscosity. It also has high resistance to chemicals, staining, and moisture uptake. 1, 2-Diaminocyclohexane is used for floor coatings, marine coatings, and other industrial coatings where high chemical resistance is needed. Vea Menos | |
| 4,4'-dithiodimorpholine | Hainan Zhongxin Chemical Co., Ltd. | 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in t...Vea Mas 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in the production of synthetic rubbers and adhesives. Vea Menos | |
| ACCELERATOR 399 | Huntsman Performance Products | Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy system...Vea Mas Accelerator 399 is a superior epoxy curing promoter designed for use with amine hardeners. The product was developed specifically for use with JEFFAMINE® curing agents, but it is compatible with most amines and may be used in most amine-cured epoxy systems. Vea Menos | |
| ACTAN® DU15 | Pugh & Co. International | ACTAN®DU15 is an amine adduct in aqueous emulsion which shows high cross-linking density after reaction with epoxy resin emulsions. It contains no organic solvent. ACTAN®DU15 can be used in combination with liquid as well as with solid epoxy resins. Th...Vea Mas ACTAN®DU15 is an amine adduct in aqueous emulsion which shows high cross-linking density after reaction with epoxy resin emulsions. It contains no organic solvent. ACTAN®DU15 can be used in combination with liquid as well as with solid epoxy resins. The resulting films are hard, tough and flexible with good water resistance and outstanding wet adhesion to blasted steel and cold rolled steel. Highest initial hardness is obtained in formulations based on solid epoxy resins. Best water resistance is obtained in formulations with liquid epoxy resins. Vea Menos | |
| ACTAN® DU20 | Pugh & Co. International | ACTAN® DU20 is an amine adduct in aqueous emulsion which is designed to optimise wet adhesion of two-component water borne epoxy primers on non ferrous substrates such as galvanised steel, aluminium and its alloys. It contains no organic solvent. ACTAN...Vea Mas ACTAN® DU20 is an amine adduct in aqueous emulsion which is designed to optimise wet adhesion of two-component water borne epoxy primers on non ferrous substrates such as galvanised steel, aluminium and its alloys. It contains no organic solvent. ACTAN® DU20 with its specific amine functionality provides excellent wet and dry adhesion at a cross linking degree of 100% on metallic substrates and maintains the necessary water barrier to ensure long term protection with solid and liquid epoxy resins. Highest initial hardness is obtained in formulations based on solid epoxy resins. Quicker film formation is obtained in formulations with liquid epoxy resins. Vea Menos | |
| ACTAN® DU51 | Pugh & Co. International | ACTAN® DU51 is an aqueous emulsion of an amine adduct with relative high H-equivalent weight as supplied: 682 g/mol. It contains no organic solvent. ACTAN® DU51 reacts with most commercial solid and liquid epoxy emulsions to a hard, tough and flexible ...Vea Mas ACTAN® DU51 is an aqueous emulsion of an amine adduct with relative high H-equivalent weight as supplied: 682 g/mol. It contains no organic solvent. ACTAN® DU51 reacts with most commercial solid and liquid epoxy emulsions to a hard, tough and flexible film after evaporation of the water. The film is characterised by good water resistance and outstanding dry and wet adhesion to metallic substrates. Vea Menos | |
| ACTAN® DU62 | Pugh & Co. International | ACTAN® DU62 is an aqueous emulsion of an amine adduct with relative high H-equivalent weight as supplied: 758 g/mol. It contains no organic solvent. ACTAN® DU62 reacts with most commercial solid and liquid epoxy emulsions to a hard, tough and flexible ...Vea Mas ACTAN® DU62 is an aqueous emulsion of an amine adduct with relative high H-equivalent weight as supplied: 758 g/mol. It contains no organic solvent. ACTAN® DU62 reacts with most commercial solid and liquid epoxy emulsions to a hard, tough and flexible film after evaporation of the water.The film is characterised by good water resistance and outstanding dry and wet adhesion to metallic substrates. Vea Menos | |
| ADDAPT® PolySurF™ ACE | ADDAPT Chemicals BV | ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV ...Vea Mas ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV stability. Vea Menos | |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...Vea Mas ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. Vea Menos | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...Vea Mas ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. Vea Menos | |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...Vea Mas ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. Vea Menos | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...Vea Mas ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. Vea Menos | |
| ADDITOL® VXW 6251 | Allnex | ADDITOL® VXW 6251 is a curing component for cathodic precipitable acrylate binders. | Request Sample |
| Amicure® CG-1400F | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-1400F curing agent is a micronized grade of dicyandiamide containing 3,5% of an inert flowcontrol additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent forepoxy resins. | Request Sample |
| Amicure® CG-325G Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. | Request Sample |
| Amicure® IC-221 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self...Vea Mas Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-221 support high aesthetics, UV stability and rapid property development for fast return to service. Amicure® IC-221 curing agent is free of solvents, alkyl phenol derivatives and benzyl alcohol. Vea Menos | Request Sample |
| Amicure® IC-321 | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is desi...Vea Mas Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is designed to provide long working pot-life and high flexibility. In addition, clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-321 curing agent for polyisocyanate resin exhibit rapid property development and high aesthetics and are suitable for exterior application. Vea Menos | Request Sample |
| Amicure® IC166 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® IC166 is a polycarbamide curing agent for DTM C3 coatings. It is faster-curing compared to Amicure® IC133. This product is ideal for plural component spray systems. | Request Sample |
| Amicure® UR7/10 | Evonik Operations GmbH, BL Crosslinkers | Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid ...Vea Mas Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. Amicure® UR7/10 is supplied as a micropulverized crystalline solid which is easily dispersed into liquid epoxy resin. Applications for this product include one-component paste and film adhesives, heat-cure composites, and prepreg composites. Vea Menos | Request Sample |
| AMINOETHYLPIPERAZINE - HP (AEP-HP) | Huntsman Performance Products | AMINOETHYLPIPERAZINE - HP (AEP-HP) is a highly reactive epoxy curing agent and epoxy curing promoter for use with JEFFAMINE® amine hardeners in curing epoxy resins. | |
| Aminopropyldiethanolamine (APDEA) | Huntsman Performance Products | Aminopropyldiethanolamine (APDEA) is a clear, essentially colourless, high-boiling liquid undergoing reactions typical of primary amines and alcohols. Finds use as chain extender or co-curing agent in coatings and can serve as a chemical intermediate. | |
| Amirez 142 | Incorez Ltd. | Este es un agente endurecedor transmitido por agua, emulsionado reactivo para las resinas de epoxi líquidas. El producto experimentará una reacción química con la resina de epoxi líquida para rendir una capa resistente, durable, de alto lustre convenient...Vea Mas Este es un agente endurecedor transmitido por agua, emulsionado reactivo para las resinas de epoxi líquidas. El producto experimentará una reacción química con la resina de epoxi líquida para rendir una capa resistente, durable, de alto lustre conveniente para aplicaciones para pisos y para paredes. Vea Menos | Request Sample |
| Amirez 148/010 | Incorez Ltd. | Agente endurecedor de aducción reactiva de poliamina para resinas de epoxi. Emulsionará la mayoría de las resinas de epoxi líquidas. Por la reacción química reticulará los epóxidos para producir polímeros durables de gran resistencia. | Request Sample |
| Amirez 148/024 | Incorez Ltd. | Agente endurecedor de poliamina de aducción reactiva para resinas de epoxi. Mediante una reacción química, reticulará los epóxidos para producir polímeros durables de alta resistencia. | Request Sample |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...Vea Mas Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. Vea Menos | Request Sample |
| Ancamide® 2050 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2050 Curing Agent is a special polyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings. This product is a clear, amber liquid. | Request Sample |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| ANCAMIDE® 220-IPA-73 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. | Request Sample |
| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...Vea Mas ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. Vea Menos | Request Sample |
| ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...Vea Mas ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. Vea Menos | Request Sample |
| Ancamide® 2353 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2353 Curing Agent is a highperformance modified polyamide intended for use with epoxy resins in two-part ambient cure coatings. Special features of this product include fast dry, good cure at low temperatures and good resistance to solvents. Thi...Vea Mas Ancamide® 2353 Curing Agent is a highperformance modified polyamide intended for use with epoxy resins in two-part ambient cure coatings. Special features of this product include fast dry, good cure at low temperatures and good resistance to solvents. This product is a slightly turbid amber liquid. Vea Menos | Request Sample |
| Ancamide® 2396 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2396 Curing Agent is a modified amidoamine intended for use at ambient temperature with liquid epoxy resins. Compared with standard amidoamines, it imparts better chemical resistance, improved film appearance, better low temperature cure and res...Vea Mas Ancamide® 2396 Curing Agent is a modified amidoamine intended for use at ambient temperature with liquid epoxy resins. Compared with standard amidoamines, it imparts better chemical resistance, improved film appearance, better low temperature cure and resistance to blush. Ancamide® 2396 Curing Agent is ideal for systems applied to concrete, such as trowelable flooring, self-leveling flooring, grouts and concrete primers. Vea Menos | Request Sample |
| Ancamide® 2426 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2426 Curing Agent is a modified, low viscosity, blush-resistant amidoamine curing agent for use in coatings, civil engineering and adhesive applications. This product is a light brown liquid. | Request Sample |
| Ancamide® 2445 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2445 Curing Agent is a modified polyamide designed to be used with liquid epoxy resin. It is a medium-viscosity curing agent which exhibits fast cure at low temperatures. This product has a low residual amine content and it gives coatings with r...Vea Mas Ancamide® 2445 Curing Agent is a modified polyamide designed to be used with liquid epoxy resin. It is a medium-viscosity curing agent which exhibits fast cure at low temperatures. This product has a low residual amine content and it gives coatings with reduced blush. The product can be used to formulate low-VOC, anti-corrosive coatings for marine, military and industrial maintenance applications. Vea Menos | Request Sample |
| Ancamide 2634™ Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide 2634™ Curing Agent s a modified polyamide curing agent designed for use in two component solvent borne epoxy coatings where high performance and cost effectiveness are key requirements. This product offers high corrosion and chemical resistance a...Vea Mas Ancamide 2634™ Curing Agent s a modified polyamide curing agent designed for use in two component solvent borne epoxy coatings where high performance and cost effectiveness are key requirements. This product offers high corrosion and chemical resistance along with good heat resistance, cathodic disbondment resistance, high blush resistance, good flexibility and good adhesion. Ancamide 2634™ can be used over a broad temperature range. Its ability to cure at low temperatures and develop a high Tg when heat cured, makes Ancamide 2634 an excellent candidate for both low temperature and high temperature applications. Vea Menos | Request Sample |
| Ancamide® 2652 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2652 Curing Agent is a specialpolyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings specifically developed to provide long overcoatability with epoxy and alternative resin technology. | Request Sample |
| Ancamide® 2769 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent fre...Vea Mas Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent free or high solids coatings with ultra low volatile organic components. Vea Menos | Request Sample |
| Ancamide® 2832 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2832 is a modified polyamide curing agent developed to provide rapid through cure and long overcoatability with epoxy resins. It can be used in refinish, non-automotive OEM and in wet-on-wet type applications in the protective coatings market fo...Vea Mas Ancamide® 2832 is a modified polyamide curing agent developed to provide rapid through cure and long overcoatability with epoxy resins. It can be used in refinish, non-automotive OEM and in wet-on-wet type applications in the protective coatings market for fast return to service. Vea Menos | Request Sample |
| Ancamide® 2864 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2864 is a next generation modified polyamide curing agent intended to be used in epoxy coatings for high-performance, corrosion resistant coatings. The curing agent exhibits low viscosity and fast through-cure with good blush resistance at both ...Vea Mas Ancamide® 2864 is a next generation modified polyamide curing agent intended to be used in epoxy coatings for high-performance, corrosion resistant coatings. The curing agent exhibits low viscosity and fast through-cure with good blush resistance at both ambient and at low temperature conditions (5°C). Vea Menos | Request Sample |
| Ancamide® 2891 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent b...Vea Mas Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent borne epoxy coatings, where high barrier properties and fast return to service are essential. Ancamide® 2891 Curing Agent is alkyl phenol and salicylic acid free while offering excellent Corrosion and Chemical Resistance along with good appearance. The product can be used over a broad temperature range and provides overnight cure at temperatures down to 5°C. Vea Menos | Request Sample |
| Ancamide® 350A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, b...Vea Mas Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, but not exclusively with liquid epoxy resin. Applications for Anacamide® 350A include adhesives, sealants, putties, flexible cable jointing and high solids coatings. Vea Menos | Request Sample |
| Ancamide® 351A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and...Vea Mas Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and superior adhesion properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. Vea Menos | Request Sample |
| Ancamide® 375A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 375A Curing Agent is one in a series of standard reactive polyamides designed for use in the curing of epoxy resins. It has a lower viscosity than any other member of the series, and a high imidazoline content which results in a long pot life wi...Vea Mas Ancamide® 375A Curing Agent is one in a series of standard reactive polyamides designed for use in the curing of epoxy resins. It has a lower viscosity than any other member of the series, and a high imidazoline content which results in a long pot life with liquid resins. Vea Menos | Request Sample |
| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...Vea Mas ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. Vea Menos | Request Sample |
| Ancamide® 512 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cur...Vea Mas Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cure rate or other properties. Vea Menos | Request Sample |
| Ancamide® 910 | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel streng...Vea Mas Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. Vea Menos | Request Sample |
| Ancamine® 2014AS/FG | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-com...Vea Mas Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-component adhesives and solvent free laminating. Vea Menos | Request Sample |
| Ancamine™ 2264 | Evonik Operations GmbH, BL Crosslinkers | Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffnes...Vea Mas Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffness and elevated temperature performance in cured systems, compared with cycloaliphatic diamine-cured systems. Applications for this product include filament winding, resin transfer molding, potting for tooling, electrical and general industrial applications. Vea Menos | Request Sample |
| Ancamine® 2334 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resist...Vea Mas Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resistance to dilute sulfuric acid and methanol. Appropriate applications include industrial flooring and chemically resistant coatings in food preparation areas. Vea Menos | Request Sample |
| Ancamine® 2337S | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...Vea Mas Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. Vea Menos | Request Sample |
| Ancamine® 2441 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2441 curing agent is a modified polyamine which was designed for use as a latent curing agentfor onecomponent adhesive formulations. The product can also be used as an accelerator fordicyandiamide (dicy). Its combinatio...Vea Mas Ancamine® 2441 curing agent is a modified polyamine which was designed for use as a latent curing agentfor onecomponent adhesive formulations. The product can also be used as an accelerator fordicyandiamide (dicy). Its combination of low temperature activation, good shelf life and high glass transitiontemperature permits use in many applications requiring latency and high performance. Vea Menos | Request Sample |
| ANCAMINE® 2489 CURING AGENT | Evonik Operations GmbH, BL Crosslinkers | Modified cycloaliphatic amine offering low color and low viscosity. Allows higher filler loading and/or a reduced need for diluents. Provides very rapid cure and high gloss and blush resistance. | Request Sample |
| Ancamine® 2712 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, faci...Vea Mas Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine® 2712 curing agent allows the use in emission compliant coating and flooring systems. Vea Menos | Request Sample |
| Ancamine® 2712 M | Evonik Operations GmbH, BL Crosslinkers | Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzy...Vea Mas Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine 2712M curing agent allows the use in emission compliant coating and flooring systems. Vea Menos | Request Sample |
| ANCAMINE® 2719 | Evonik Operations GmbH, BL Coating & Adhesive Resins | ANCAMINE® 2719 curing agent is a nonyl- and p-tert-butyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin. It is of low viscosity and highly reactive at low temperatures ~5°C. Ancamine 2719 will react with...Vea Mas ANCAMINE® 2719 curing agent is a nonyl- and p-tert-butyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin. It is of low viscosity and highly reactive at low temperatures ~5°C. Ancamine 2719 will react with liquid epoxy resins at low temperature to produce a highly chemical resistant surface coating. Vea Menos | Request Sample |
| Ancamine® 2726 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2726 es una amina cicloalifática modificada que ofrece buen color y estabilidad del color. Proporciona alto brillo, películas sin arrebol con buena resistencia química. Este producto se utiliza en revestimientos de alto contenido en sólidos y si...Vea Mas Ancamine® 2726 es una amina cicloalifática modificada que ofrece buen color y estabilidad del color. Proporciona alto brillo, películas sin arrebol con buena resistencia química. Este producto se utiliza en revestimientos de alto contenido en sólidos y sin solventes, recubrimientos de gel y pisos autonivelantes. Vea Menos | Request Sample |
| Ancamine® 2735 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2735 es una poliamina cicloalifática modificad. Este agente de curado de baja viscosidad y baja intensidad de color está diseñado para el curado de la resina epoxi líquida a temperatura ambiente, aunque puede curar sistemas de resina a una tempe...Vea Mas Ancamine® 2735 es una poliamina cicloalifática modificad. Este agente de curado de baja viscosidad y baja intensidad de color está diseñado para el curado de la resina epoxi líquida a temperatura ambiente, aunque puede curar sistemas de resina a una temperatura inferior a los 5 °C. Las ventajas de Ancamine ®2735 incluyen excelente resistencia al amarilleo, baja intensidad de color, rápida velocidad de curado y endurecimiento a temperatura ambiente y a baja temperatura, baja viscosidad, muy buena resistencia química y mecánica y buena resistencia de carbamación Las aplicaciones de Ancamine® 2735 pueden incluir suelos autonivelantes industriales y decorativos y revestimientos con alto contenido de sólidos y sin solventes. Vea Menos | Request Sample |
| Ancamine® 2739 | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low vol...Vea Mas Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low volatile organic component coating and flooring formulations and allows the use in emission compliant systems. Compared to Ancamine® 2712 curing agent, Ancamine® 2739 curing agent offers long pot-life whilst retaining cure speed and through cure and providing enhanced UV durability. Vea Menos | Request Sample |
| Ancamine® 2759 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotti...Vea Mas Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotting. Ancamine® 2759 curing agent can be used to formulate solvent-free topcoats or self leveling and screed floorings where high chemical resistance is required. The product is free of nonyl phenol. Vea Menos | Request Sample |
| Ancamine® 2800 | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulatio...Vea Mas Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulations. Vea Menos | Request Sample |
| Ancamine® 2802 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2802 curing agent is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient temperature application. Systems based on Ancamine® 2802 curing agent deliver excellent colour stability and high aesthetics w...Vea Mas Ancamine® 2802 curing agent is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient temperature application. Systems based on Ancamine® 2802 curing agent deliver excellent colour stability and high aesthetics which makes the product ideal for low yellowing epoxy coating and flooring applications. In addition, Ancamine2802 curing agent was developed for use in emission compliant coatings and floorings. Vea Menos | Request Sample |
| Ancamine® 2908A Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low v...Vea Mas Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low viscosity. This can enhance fabricator processing with improved fiber wetting, minimised material waste and improved overall throughput. It is recommended for use in composites’ processing, industrial electrical, and electronics applications. Vea Menos | Request Sample |
| Ancamine® 2914UF Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2914UF is an epoxy curing agent designed to achieve an ultra-fast cure speed at room temperature in adhesive applications. The combination of ultra-fast set time and rapid property development allows end users to improve the production throughpu...Vea Mas Ancamine® 2914UF is an epoxy curing agent designed to achieve an ultra-fast cure speed at room temperature in adhesive applications. The combination of ultra-fast set time and rapid property development allows end users to improve the production throughput. Vea Menos | Request Sample |
| Anquamine® 100 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curi...Vea Mas Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curing agent provides 6-8 hours pot life with liquid epoxy resins and addresses the typically short pot life of 1-2 hours from current two component, water-based systems. Vea Menos | Request Sample |
| Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...Vea Mas Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. Vea Menos | Request Sample |
| Anquamine® 287 Waterborne Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 es un nuevo agente de curado epoxi a base de agua diseñado para utilizar en sistemas epoxi de dos componentes con resinas epoxi líquidas estándar y líquidas modificadas sin el agregado de emulsionantes. El líquido es ámbar a verdoso. El imp...Vea Mas Anquamine® 287 es un nuevo agente de curado epoxi a base de agua diseñado para utilizar en sistemas epoxi de dos componentes con resinas epoxi líquidas estándar y líquidas modificadas sin el agregado de emulsionantes. El líquido es ámbar a verdoso. El imprimador base Anquamine® 287 exhibe una excelente adhesión en el concreto fresco y propiedades de penetración que superan a otras tecnologías de agentes de curado a base de agua. También puede formularse en piso epoxi cementicio con excelente permeabilidad de humedad y resistencia al choque térmico. Las aplicaciones pueden incluir pisos epoxi cementicios, imprimador o sellador de concreto fresco, compuesto para el curado de concreto e imprimador para concreto nuevo o viejo. Vea Menos | Request Sample |
| Anquamine® 401 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 401 waterborne curing agent is a modified aliphatic amine supplied at 70% solids in water. It is intended for use with Liquid Epoxy Resin (EEW=190) and waterborne epoxy dispersions in two component, ambient-cure, waterborne epoxy coatings. An...Vea Mas Anquamine® 401 waterborne curing agent is a modified aliphatic amine supplied at 70% solids in water. It is intended for use with Liquid Epoxy Resin (EEW=190) and waterborne epoxy dispersions in two component, ambient-cure, waterborne epoxy coatings. Anquamine® 401 curing agent can also be utilized with different types of epoxy resin depending upon the properties desired. Vea Menos | Request Sample |
| Anquamine® 419 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 c...Vea Mas Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primers, white gloss enamels and clear coats. It can be used with different solid epoxy resin dispersions depending upon the properties desired. Vea Menos | Request Sample |
| Anquamine® 721 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC....Vea Mas Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete. Vea Menos | Request Sample |
| Anquamine® 728 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Anc...Vea Mas Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Ancarez® AR 555, and standard liquid epoxy resin. Vea Menos | Request Sample |
| Anquamine® 731 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. ...Vea Mas Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine® 731 curing agent easily emulsifies standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins. Vea Menos | Request Sample |
| Anquamine® 735 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Fo...Vea Mas Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Formulations based on Anquamine® 735 curing agent provide highly decorative functional floors without the requirement for plasticisers or solvents. Vea Menos | Request Sample |
| APMS Fluid A 1000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...Vea Mas APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. Vea Menos | |
| APMS Fluid A 10000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mo...Vea Mas APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. Vea Menos | |
| APMS Fluid A 2000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...Vea Mas APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. Vea Menos | |
| APMS Fluid A 5000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...Vea Mas APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. Vea Menos | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | BAXXODUR™ EC 201 es un agente endurecedor a base de amina cicloalifática, de viscosidad baja y reactividad moderada. Aplicaciones: adhesivo estructural, pisos, lechada, revestimientos de revestimiento, Etc., en la construcción; también en la laminación c...Vea Mas BAXXODUR™ EC 201 es un agente endurecedor a base de amina cicloalifática, de viscosidad baja y reactividad moderada. Aplicaciones: adhesivo estructural, pisos, lechada, revestimientos de revestimiento, Etc., en la construcción; también en la laminación compuesta, fundición y encapsulación, revestimiento protector de alta resistencia. Vea Menos | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | BAXXODUR™ 301 es un agente endurecedor a base de amina de poliéter con viscosidad baja y vida útil larga. Aplicaciones: adhesivo estructural, construcción, laminación, fundición y encapsulación de compuestos, revestimientos de revestimientos decorativos y...Vea Mas BAXXODUR™ 301 es un agente endurecedor a base de amina de poliéter con viscosidad baja y vida útil larga. Aplicaciones: adhesivo estructural, construcción, laminación, fundición y encapsulación de compuestos, revestimientos de revestimientos decorativos y de protección. Vea Menos | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | BAXXODUR™ 302 es un agente endurecedor a base de amina de poliéter de baja viscosidad y una vida útil larga. Aplicaciones: compuestos, adhesivo estructural, endurecedor de epoxi. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | BAXXODUR™ EC 110 es un agente endurecedor rápido a base de amina alifática de baja viscosidad. Aplicaciones: lechada de epoxi en la construcción, revestimiento de epoxi en la marina y en mantenimiento, fundición y encapsulación, laminación de compuestos,...Vea Mas BAXXODUR™ EC 110 es un agente endurecedor rápido a base de amina alifática de baja viscosidad. Aplicaciones: lechada de epoxi en la construcción, revestimiento de epoxi en la marina y en mantenimiento, fundición y encapsulación, laminación de compuestos, intermedio para la poliamida. Vea Menos | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | BAXXODUR™EC 130 es un agente endurecedor a base de amina de poliéter con viscosidad baja y alta reactividad. Aplicaciones: adhesivo estructural y laminación de compuestos. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | BAXXODUR™EC 252 es un agente endurecedor a base de amina cicloalifática de viscosidad muy baja y reactividad moderada. Aplicaciones: adhesivo estructural, revestimiento de epoxi del alta resistencia, laminación, fundición y encapsulación de compuestos, e...Vea Mas BAXXODUR™EC 252 es un agente endurecedor a base de amina cicloalifática de viscosidad muy baja y reactividad moderada. Aplicaciones: adhesivo estructural, revestimiento de epoxi del alta resistencia, laminación, fundición y encapsulación de compuestos, epoxi preimpregnado. Vea Menos | |
| BECKOPOX™ VEH 2106w/80WA | Allnex | Aducto alifático de poliamina. Utilizado juntamente con dispersiones sólidas de resina epoxi o resinas líquidas emulsionadas. | Request Sample |
| BECKOPOX™ VEH 2177w/80WA | Allnex | Beckopox® VEH 2177W/80WA es un ácido no acético a base de agua que contiene aducto de poliamina alifática que se utiliza junto con dispersiones de resinas epoxi sólidas o resinas líquidas emulsionadas. | Request Sample |
| BRB Siloen® SMA 286 | BRB International BV | BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coating...Vea Mas BRB Siloen® SMA 286 is a 100% active cross-linkable silicone acrylate pre-polymer. It is a silicone additive, especially designed for radiation cure coatings such as overprint varnishes for packaging, inks, coating with release properties and wood coatings. It can also act as an intermediate for polymers modification. Vea Menos | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...Vea Mas CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. Vea Menos | |
| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...Vea Mas CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. Vea Menos | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...Vea Mas CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. Vea Menos | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...Vea Mas CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. Vea Menos | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...Vea Mas CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. Vea Menos | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...Vea Mas CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. Vea Menos | |
| Curing Agent C8 | Ichemco | Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to...Vea Mas Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. Vea Menos | |
| Curing Agent V3 | Ichemco | Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive ancho...Vea Mas Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. Vea Menos | |
| Curing Agent V4 | Ichemco | Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage t...Vea Mas Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. Vea Menos | |
| Curox® I-200 | UNITED INITIATORS GMBH & CO KG | Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...Vea Mas Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. Vea Menos | |
| Curox® I-300 | UNITED INITIATORS GMBH & CO KG | Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...Vea Mas Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. Vea Menos | |
| Curox® M-100 | UNITED INITIATORS GMBH & CO KG | Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...Vea Mas Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). Vea Menos | |
| Curox® M-102 | UNITED INITIATORS GMBH & CO KG | Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...Vea Mas Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). Vea Menos | |
| Curox® M-103 | UNITED INITIATORS GMBH & CO KG | Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...Vea Mas Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). Vea Menos |
