| Bitoner® C5 Resin BT-2104 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wa...Vea Mas Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wax cloud point, low odor, and water resistance. BT-2104 has recommended applications in solvent based PSA, sealants, coatings, hot melt adhesives, and HMPSA. Vea Menos | |
| Bitoner® C9 Resin BP-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low...Vea Mas Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-100 has recommended applications in sealants, shoe adhesives, rubber, coatings, and hot melt adhesives. Vea Menos | |
| Bitoner® C9 Resin BP-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...Vea Mas Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. Vea Menos | |
| Bitoner® C9 Resin BP-140 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...Vea Mas Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. Vea Menos | |
| Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...Vea Mas Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. Vea Menos | |
| Bitoner® H-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...Vea Mas Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. Vea Menos | |
| Bitoner® Hydrogenated C9 Resins H-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS...Vea Mas Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-120 has recommended applications in solvent adhesives, hot melt adhesives, and wax modification. Vea Menos | |
| Bitoner® Resin BA-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...Vea Mas Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. Vea Menos | |
| Bitoner® Resin DH-1110 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and...Vea Mas Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and good compatibility. DH-1110 has recommended applications in hot melt adhesives, sealants, pressure sensitive adhesives, and wax modifications. Vea Menos | |
| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Disvamide-603 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-603 is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-605 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-605 is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-605 HV | D.S.V. Chemicals Pvt. Ltd. | Disvamide-605 HV is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-610 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-610 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polythene and polyethylene. | |
| Disvamide-611 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-611 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polyethylene and polypropylene. | |
| Disvamide-615 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-615 is a reactive polyamide resin. This product appears as a highly viscous liquid. It can be used in general-purpose epoxy polyamide coatings that provide excellent resistance, as well as in epoxy adhesives. | |
| Disvamide-616 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-616 is a reactive polyamide resin in a 70% solution of xylene. This product appears as a surface liquid. It can be used in protective surface coatings. | |
| Disvamide-625 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-625 is a reactive polyamide resin. This product appears as a viscous liquid. It can be used as a curing agent for epoxy-based adhesives and coatings. | |
| Disvamide-640 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-640 is a reactive polyamide resin. This product appears as a viscous liquid. It can be used as a curing agent for epoxy-based adhesives and coatings. | |
| Disvamide-660 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-660 is a reactive polyamide resin. This product appears as a liquid. It can be used in high-build polyamide coatings, castings, potting, encapsulation, and flooring applications. | |
| Domide G-0240 | Kukdo Chemical Co., Ltd. | Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sea...Vea Mas Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sealants. Vea Menos | |
| Domide G-0331 | Kukdo Chemical Co., Ltd. | Domide G-0331 is a reactive medium viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for making grouts, moldings, adhesives and sealants. | |
| Domide G-0930 | Kukdo Chemical Co., Ltd. | Domide G-0930 is a reactive Polyamide Resin used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in producing laminates, castings, coatings, concrete repair com...Vea Mas Domide G-0930 is a reactive Polyamide Resin used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in producing laminates, castings, coatings, concrete repair compounds, adhesives and sealants. Vea Menos | |
| Domide G-5022 | Kukdo Chemical Co., Ltd. | Domide G-5022 is a reactive polyamide resin which shows excellent adhesion, toughness, water and chemical resistance as a curing agent for epoxy coatings and adhesives. It is particularly designed for use in solvent-based surface coatings. | |
| Domide G-5022X70 | Kukdo Chemical Co., Ltd. | Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well sui...Vea Mas Domide G-5022X70 is a reactive polyamide resin including Xylene solvent. This product is designed for use with solid or liquid epoxy resins. It is used for flexible and anti-corrosive coatings under room temperature curing system. This product is well suited for use in maintenance coatings and primers. Vea Menos | |
| Domide G-640 | Kukdo Chemical Co., Ltd. | Domide G-640 is a standard high-imidazoline Polyamide Resin and used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in the production of putties, castings, hig...Vea Mas Domide G-640 is a standard high-imidazoline Polyamide Resin and used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in the production of putties, castings, high solid coatings, concrete repair compounds, adhesives and sealants. Vea Menos | |
| Domide G-700 | Kukdo Chemical Co., Ltd. | Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based mainten...Vea Mas Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based maintenance coatings, primers, sealers and coatings for concrete. Vea Menos | |
| Domide G-A0432 | Kukdo Chemical Co., Ltd. | Domide G-A0432 is a low viscosity Polyamidoamine Resin for reaction with liquid or solid Epoxy Resins. GA0432 is lower in viscosity than G-A0533. This product is well suited for use in sealants, electrical potting and casting. | |
| Domide G-A0533 | Kukdo Chemical Co., Ltd. | Domide G-A0533 is a low-viscosity Polyamidoamine Resin designed for reaction with liquid or solid Epoxy Resins. It can be used as all or part for use in making sealants, electrical potting, casting, coatings and flooring applications. | |
| Dromide® 930 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 930 is a Co-solvent Soluble Non-Reactive Polyamide Resin suitable for flexographic and gravure printing inks and over printing lacquers, this resin provides good glossy sharp prints. | |
| Dromide® 9315 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9315 is a High Viscosity Reactive Polyamide Curing agent for Epoxy Resin to be used in various applications. | |
| Dromide® 9315X | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9315X is a Low Viscosity Reactive Polyamide Curing agent for epoxy resin supplied in 70% solution in Xylene. | |
| Dromide® 9325 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9325 is a Medium Viscosity Reactive Polyamide Curing Agent for epoxy resin to be used in various applications. | |
| Dromide® 9340 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 9340 is a Medium to Low Viscosity Reactive Polyamide Curing Agent for epoxy resin to be used in various applications. | |
| Dromide® 950 | D.R. Coats Ink & Resins Pvt. Ltd. | Dromide® 950 is a Alcohol Soluble Non-Reactive Polyamide Resin with low temperature resistance used for flexographic and gravure liquid printing inks. | |
| Flex-Rez™ 1074 CS C | Lawter | Flex-Rez™ 1074 CS C is a co-solvent soluble polyamide resin that provides good adhesion to treated film like aluminum, nylon, glassine and other aluminum-coated films. It is also a good film former, shows low viscosity, fast solvent release, resistance to...Vea Mas Flex-Rez™ 1074 CS C is a co-solvent soluble polyamide resin that provides good adhesion to treated film like aluminum, nylon, glassine and other aluminum-coated films. It is also a good film former, shows low viscosity, fast solvent release, resistance to oils, alkalis, grease and water and is compatible with high acid-value rosins, phenolic and other rosin offshoots. Flex-Rez™ 1074 CS C is suitable for use in flexographic and gravure inks, heat and seal coatings, cold seal release lacquers and in overprint varnishes. Vea Menos | |
| Flex-Rez™ 1084 AS C | Lawter | Flex-Rez™ 1084 AS C is an alcohol soluble polyamide resin with a high melt point, offering high heat resistance as well as good gel resistance and improved resistance to grease, rub and scratch. It also promotes film hardness, offers a fast solvent releas...Vea Mas Flex-Rez™ 1084 AS C is an alcohol soluble polyamide resin with a high melt point, offering high heat resistance as well as good gel resistance and improved resistance to grease, rub and scratch. It also promotes film hardness, offers a fast solvent release and offers great potential in the creation of high performance inks for various synthetic polymer substrates. The product is used in flexographic and gravure inks and overprint varnishes. Vea Menos | |
| Flex-Rez™ 1094 CS C | Lawter | Flex-Rez™ 1094 CS C is a co-solvent soluble polyamide resin that provides gel resistance and good adhesion to treated film. It is compatible with high-acid value rosin, rosin-derived resins and also finds itself providing good adhesion, chemical resistanc...Vea Mas Flex-Rez™ 1094 CS C is a co-solvent soluble polyamide resin that provides gel resistance and good adhesion to treated film. It is compatible with high-acid value rosin, rosin-derived resins and also finds itself providing good adhesion, chemical resistance and high gloss. The product is used in flexographic and gravure inks and overprint varnishes. Vea Menos | |
| Flex-Rez™ 1155 AS C | Lawter | Flex-Rez™ 1155 AS C is an alcohol soluble polyamide resin that offers good pigment wetting and low viscosity in a product that is considered the most versatile of the Flex-Rez™ resin series. It has good adhesion as well as oil, lard, grease, water and alk...Vea Mas Flex-Rez™ 1155 AS C is an alcohol soluble polyamide resin that offers good pigment wetting and low viscosity in a product that is considered the most versatile of the Flex-Rez™ resin series. It has good adhesion as well as oil, lard, grease, water and alkali resistance. The product also offers high gloss and compatibility with other resins making it an effective polyamide for pigment grinding. It also offers good gel resistance and shows good tolerance for ester solvents. It has uses in cold seal release lacquers, flexographic and gravure inks and overprint varnishes. Vea Menos | |
| Flex-Rez™ 2433 AD C | Lawter | Flex-Rez™ 2433 AD C is an alcohol-dilutable polyamide resin that has good adhesion and gloss with wet-pack resistance and a low odor as key features. The product has served as an industry standard for surface printing work on paper and film. It is used in...Vea Mas Flex-Rez™ 2433 AD C is an alcohol-dilutable polyamide resin that has good adhesion and gloss with wet-pack resistance and a low odor as key features. The product has served as an industry standard for surface printing work on paper and film. It is used in overprint varnishes and gravure and flexographic inks. Vea Menos | |
| Flex-Rez™ 3370 CS C | Lawter | Flex-Rez™ 3370 CS C is a co-solvent polyamide resin that provides good adhesion and gel resistant properties to various treated films. It also shows better nitrocellulose compatibility than other co-solvent resins. The product can be used in overprint var...Vea Mas Flex-Rez™ 3370 CS C is a co-solvent polyamide resin that provides good adhesion and gel resistant properties to various treated films. It also shows better nitrocellulose compatibility than other co-solvent resins. The product can be used in overprint varnishes and in gravure and flexographic inks. Vea Menos | |
| Flex-Rez™ 5111 AD C | Lawter | Flex-Rez™ 5111 AD C is an alcohol-dilutable polyamide resin that has good adhesion and shows ice water wrinkle resistance. Its other benefits include high gloss and pigment wetting abilities, block resistance and flexibility. The product is used in gravur...Vea Mas Flex-Rez™ 5111 AD C is an alcohol-dilutable polyamide resin that has good adhesion and shows ice water wrinkle resistance. Its other benefits include high gloss and pigment wetting abilities, block resistance and flexibility. The product is used in gravure and flexographic inks and overprint varnishes. Vea Menos | |
| H-101 | Macro Polymers Pvt. Ltd. | H-101 is an aliphatic polyamide resin. This product should be used in an aliphatic epoxy adduct as a hardener, in order to induce chemical-resistant protection for coatings with or without coal tar modification. It can be used in coatings. | |
| ITACUR 70XB-ES | DKSH | ITACUR 70XB-ES is a polyaminoamide epoxy adduct in a xylene and butanol solution to be used at room temperature and combined with epoxy resins to obtain reactive paints. Compared with normal non-adducted polyaminoamide resins, such as ITAMID B70X or ITAMI...Vea Mas ITACUR 70XB-ES is a polyaminoamide epoxy adduct in a xylene and butanol solution to be used at room temperature and combined with epoxy resins to obtain reactive paints. Compared with normal non-adducted polyaminoamide resins, such as ITAMID B70X or ITAMID B80XB, ITACUR 70XB-ES permits to obtain films with high mechanical and chemical resistances with a shiny and defect free surface as the adduct reduces the adverse effects of atmospheric humidity and carbon dioxide during the hardening reaction. Indeed, ITACUR 70XB-ES gives excellent results with relative humidity as high as 70% and at low temperatures (10-15°C). This product is available in Spain and Portugal. Vea Menos | Request Sample |
| ITAMID B70X | DKSH | ITAMID B70X is a polyaminoamide resin in solution of xylene widely used in epoxy formulates. This product is available in Spain and Portugal. | Request Sample |
| ITAMID FL300 | DKSH | ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses,...Vea Mas ITAMID FL300 is a liquid epoxy resin hardener made up of low viscosity polyaminoamide resin. ITAMID FL300 is to be found used in the formulation of epoxy mortars (for laying tiles, repair of concrete, etc.), in the formulation of adhesives, poured masses, paints and floorings. Compared with traditional hardeners, ITAMID FL300 exhibits lower sensitivity to carbonatation and higher reactivity. Hardening times can be considerably reduced by including into the formulate either appropriate accelerator substances (e.g. 2-3% of tris(dimethylaminomethyl)phenol) or fastcure hardener like ITAMINE M150 or ITAMINE MB501. This product is available in Spain and Portugal. Vea Menos | Request Sample |
| Kingmide 300 | Sanho Chemical Co., Ltd. | Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applicatio...Vea Mas Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applications where increased adhesion, chemical-resistance, and water-resistance are required. Vea Menos | |
| Kingmide 310 | Sanho Chemical Co., Ltd. | Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive a...Vea Mas Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive and coating formulation applications. Vea Menos | |
| Kingmide 315-S | Sanho Chemical Co., Ltd. | Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-co...Vea Mas Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-corrosive coating formulation applications. Vea Menos | |
| Kingmide 338 | Sanho Chemical Co., Ltd. | Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation ap...Vea Mas Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation applications. Vea Menos | |
| Kingmide 340 | Sanho Chemical Co., Ltd. | Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty form...Vea Mas Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty formulation applications. Vea Menos | |
| Kingmide 370 | Sanho Chemical Co., Ltd. | Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation appli...Vea Mas Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation applications. Vea Menos | |
| Kingmide 374-L | Sanho Chemical Co., Ltd. | Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulati...Vea Mas Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulation applications. Vea Menos | |
| Kingmide 530 | Sanho Chemical Co., Ltd. | Kingmide 530 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 105-115°C. Kingmide 530 is most commonly used in rotogravure printing ink and alkyd varnish formulation applications. | |
| Kingmide 533 | Sanho Chemical Co., Ltd. | Kingmide 533 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 100-110°C. Kingmide 533 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 549 | Sanho Chemical Co., Ltd. | Kingmide 549 is a fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 112-119°C. Kingmide 549 is most commonly used in flexographic printing ink formulation applications. | |
| Kingmide 550 | Sanho Chemical Co., Ltd. | Kingmide 550 is a solid-type fatty polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550 is most commonly used in rotogravure printing ink formulation applications. | |
| Kingmide 550-A | Sanho Chemical Co., Ltd. | Kingmide 550-A is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-A is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 550-G | Sanho Chemical Co., Ltd. | Kingmide 550-G is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-G is most commonly used in hot-melt adhesive formulation applications. | |
| Kingmide 551 | Sanho Chemical Co., Ltd. | Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applica...Vea Mas Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide 705 | Sanho Chemical Co., Ltd. | Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation a...Vea Mas Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation applications. Vea Menos | |
| Kingmide 715-A | Sanho Chemical Co., Ltd. | Kingmide 715-A is a medium viscosity, modified polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s. Kingmide 715-A is most commonly used in putty and adhesive formulation applications. | |
| Kingmide H-110 | Sanho Chemical Co., Ltd. | Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation application...Vea Mas Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-120 | Sanho Chemical Co., Ltd. | Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applicatio...Vea Mas Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-130 | Sanho Chemical Co., Ltd. | Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applicatio...Vea Mas Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-130W | Sanho Chemical Co., Ltd. | Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applicat...Vea Mas Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-135GC | Sanho Chemical Co., Ltd. | Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applic...Vea Mas Kingmide H-135GC is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 1500-4000 mPa.s and a softening point of 130-140°C. Kingmide H-135GC is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-140HP | Sanho Chemical Co., Ltd. | Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation appl...Vea Mas Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide H-170HV | Sanho Chemical Co., Ltd. | Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applic...Vea Mas Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applications. Vea Menos | |
| Kingmide X-2100 | Sanho Chemical Co., Ltd. | Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, ...Vea Mas Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, and putty formulation applications. Vea Menos | |
| Kingmide X-220B | Sanho Chemical Co., Ltd. | Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation ap...Vea Mas Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation applications. Vea Menos | |
| LH-75 | PCI Group, Inc. | LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers includi...Vea Mas LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers including nitrocellulose, acrylic, polyurethane and acid-catalyzed varnishes. It is also effective in polyester / melamine systems. It is not recommended in systems with a high level of aliphatic hydrocarbons. Vea Menos | |
| Luna-add RC961 | DKSH | Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This produ...Vea Mas Luna-add RC961 is a micronized amide wax to improve degassing of powder coatings applied over porous substrates. The additive also helps to improve surface slip and optimizes the orientation of aluminum modified powder in metallic formulations. This product is available in Europe, Asia and North America. Vea Menos | Request Sample |
| nolax A21.2014 PE40 | nolax AG (Vanora) | nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 P...Vea Mas nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 PE40 has a melting point of 170 to 190°C, relative density of 1.1 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. Vea Menos | |
| nolax A21.2015 | nolax AG (Vanora) | nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a ...Vea Mas nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. Vea Menos | |
| nolax A21.2015 S | nolax AG (Vanora) | nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S ha...Vea Mas nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. Vea Menos | |
| Pigment Yellow 34 Middle | HangZhou Multicolor Chemical Co., Ltd. | Pigment Yellow 34 Middle es un pigmento amarillo de croma media de color brillante y fuerte resistencia a los tintes. Se utiliza en pinturas para carretera y tiene buenas propiedades de revestimiento. | |
| Polyamide Resin PA-108 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-108 is a benzene-soluble stable polyamide resin. It has good solvent release, excellent glossiness, strong adhesive power, and fine gel resistance. This product is well suited for use in gravure printing ink, paper and thin film printin...Vea Mas Polyamide Resin PA-108 is a benzene-soluble stable polyamide resin. It has good solvent release, excellent glossiness, strong adhesive power, and fine gel resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. Vea Menos | |
| Polyamide Resin PA-188 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-188 is a benzene-soluble polyamide resin. It has good solvent release, good adhesive power, and good freezing resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing v...Vea Mas Polyamide Resin PA-188 is a benzene-soluble polyamide resin. It has good solvent release, good adhesive power, and good freezing resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. Vea Menos | |
| Polyamide Resin PA-308 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-308 is a benzene-soluble polyamide resin. It has good heat resistance, strong adhesive power, fine glossiness, anti-friction, and anti-scratch. This product is well suited for use in heat-resistance printing ink, paper and thin film pri...Vea Mas Polyamide Resin PA-308 is a benzene-soluble polyamide resin. It has good heat resistance, strong adhesive power, fine glossiness, anti-friction, and anti-scratch. This product is well suited for use in heat-resistance printing ink, paper and thin film printing ink, over-printing varnish, and over-printing ink. Vea Menos | |
| Polyamide Resin PA-388 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-388 is a benzene-soluble polyamide resin. It has good transparency, strong adhesive power, outstanding glossiness, and good pigment wettability. This product is well suited for use in gravure printing ink, paper and thin film printing i...Vea Mas Polyamide Resin PA-388 is a benzene-soluble polyamide resin. It has good transparency, strong adhesive power, outstanding glossiness, and good pigment wettability. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. Vea Menos | |
| Polyamide Resin PA-508 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-508 is a alcohol-soluble polyamide resin. It has good solvent release and strong adhesive power. This product is well suited for use in gravure printing ink, flexo printing ink, and over-printing varnish. | |
| Polyamide Resin PA-588 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-588 is a alcohol-soluble polyamide resin. It has outstanding glossiness, higher softening point, low freezing point, and good transparency. This product is well suited for use in gravure printing ink, flexo printing ink, and over-printi...Vea Mas Polyamide Resin PA-588 is a alcohol-soluble polyamide resin. It has outstanding glossiness, higher softening point, low freezing point, and good transparency. This product is well suited for use in gravure printing ink, flexo printing ink, and over-printing varnish. Vea Menos | |
| Polyamide Resin TK 1014 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...Vea Mas Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-140 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1014 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. Vea Menos | |
| Polyamide Resin TK 1417 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...Vea Mas Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 140-170 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1417 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. Vea Menos | |
| Polyamide Resin TK 1720 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...Vea Mas Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 170-200 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1720 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. Vea Menos | |
| Polyamide Resin TK 2000 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...Vea Mas Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 120-170 mpa.s at 25°C, and has a softening point of 115-125°C. Polyamide Resin TK 2000 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. Vea Menos | |
| Polyamide Resin TK 588B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...Vea Mas Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-180 mpa.s at 25°C, and has a softening point of 105-115°C. Polyamide Resin TK 588B finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. Vea Menos | |
| Polyamide Resin TK 588C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...Vea Mas Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 100-180°C. Polyamide Resin TK 588C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. Vea Menos | |
| Polyamide Resin TK 688B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freez...Vea Mas Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 110-180 mpa.s at 25°C, and has a softening point of 120-200°C. Polyamide Resin TK 688B finds application in gravure plastics, printing inks, paper printing inks, and hot-melt adhesives. Vea Menos | |
| Polyamide Resin TK 688C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...Vea Mas Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 120-180°C. Polyamide Resin TK 688C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. Vea Menos | |
| Polyamide Resin TK 7010 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...Vea Mas Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 70-100 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 7010 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. Vea Menos | |
| Polytone PA 302 | Polyols and Polymers | Polytone PA 302 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also pr...Vea Mas Polytone PA 302 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also provides a glossy finish. This product provides adhesion to treated polyethylene and other plastics. Polytone PA 302 is primarily used for flexographic and gravure printing inks.Polytone PA 302 is compatible with ketonic, maleic, reduced phenolic and pure phenolic resins. However,compatibility with alkyds is only partial. Vea Menos | |
| Polytone PA 303 | Polyols and Polymers | Polytone PA 303 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also pr...Vea Mas Polytone PA 303 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also provides a glossy finish. This product provides adhesion to treated polyethylene and other plastics. Polytone PA 303 is primarily used for flexographic and gravure printing inks. Polytone PA 303 is compatible with ketonic, maleic, reduced phenolic and pure phenolic resins. However,compatibility with alkyds is only partial. Compatibility of Polytone PA 303 with nitrocellulose is much improved as compared to that of & Polytone PA 302 Vea Menos | |
| Polytone PA 351 | Polyols and Polymers | Polytone PA 351 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color spirit soluble resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that provides adhesion many different substrat...Vea Mas Polytone PA 351 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color spirit soluble resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that provides adhesion many different substrates and solvent release properties with low odor. Polytone PA 351 is primarily used for flexographic and gravure printing inks. Polytone PA 351 shows excellent solubility in a variety of solvents that don’t attack rubber stereos. Under certain conditions the solutions forms reversible gels on standing and to avoid this, it is recommended to add small percentage of water or higher alcohols or aromatic hydrocarbon solvent. Polytone PA 351 has infinite solubility in ethanol and higher alcohols. It is soluble in methanol at higher concentrations – 40% and above. Vea Menos | |
| RESISTHERM™ AI 244 L | Allnex | RESISTHERM® AI 244 L can be used as a binder for the formulation of one-component baking coatings with outstanding resistance to heat and chemicals. | Request Sample |
| RILSAN® D30 NAT | Arkema | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...Vea Mas RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. Vea Menos | Request Sample |
| RILSAN® D40 NAT | Arkema | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...Vea Mas RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. Vea Menos | Request Sample |
| RILSAN® D50 NAT | Arkema | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...Vea Mas RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. Vea Menos | Request Sample |
| RILSAN® D60 NAT | Arkema | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...Vea Mas RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. Vea Menos | Request Sample |
