| 2-Ethylhexanoic Acid | Penpet Petrochemical Trading GmbH | 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...Vea Mas 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. Vea Menos | |
| 2-Ethylhexanoic Acid | Perstorp | 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and P...Vea Mas 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and PVC stabilizers. Other application areas include wood preservatives, catalyst for polyurethane and in pharmaceuticals. Vea Menos | |
| AC 108 | BIP (Oldbury) Ltd | AC 108 is a modified ammonium chloride catalyst. It is a neutral clear liquid solution with low reactivity. Primarily used as a catalyst for urea and melamine resins. | |
| AC 119 | BIP (Oldbury) Ltd | AC 119 is a modified magnesium chloride catalyst. In a highly reactivity, low PH clear solution. It has applications where high production speeds required. | |
| AC 178 | BIP (Oldbury) Ltd | AC 178 is a magnesium chloride catalyst. It has medium reactivity and is a clear solution. It is mainly used in medium cure catalyst having minimum effect on shade. | |
| AC 600 | BIP (Oldbury) Ltd | AC 600 is an amine salt of p-toluene sulphonic acid in isopropanol. It is a highly reactive, clear solution. Primarily recommended for use in curing HMMM resin PT 370. | |
| ACURE™ 500 | Allnex | ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision o...Vea Mas ACURE™ 500 is the first generation of blocked catalyst used in ACURE™ systems. ACURE™ 500 consists of a strong base which is blocked with di-ethyl carbonate. ACURE™ 500 unblocks with the release of alcohol and CO2 and is the key enabler to the provision of fast dry times with long pot lives in ACURE™ coatings. The rate at which ACURE™ 500 unblocks may be controlled by the addition of an alcohol (typically ethanol, n-propanol, or n-butanol) to the ACURE™ coating. Vea Menos | Request Sample |
| ADDITOL® P 920 | Allnex | ADDITOL® P 920 es un concentrado de color catalizador diseñado para crear acabados rugosos. Contiene 5% de sustancia activa en una matriz de poliéster hidroxilado. Los revestimientos elaborados con este concentrado de color en conjunción con CRYLCOAT® 292...Vea Mas ADDITOL® P 920 es un concentrado de color catalizador diseñado para crear acabados rugosos. Contiene 5% de sustancia activa en una matriz de poliéster hidroxilado. Los revestimientos elaborados con este concentrado de color en conjunción con CRYLCOAT® 2920-0 y un agente de reticulación de glicolurilo producen un acabado rugoso con buenas propiedades mecánicas. Vea Menos | Request Sample |
| ADDITOL® P 963 | Allnex | ADDITOL® P 963 es un concentrado de color de catalizador para utilizar en sistemas híbridos, de TGIC o Araldite® PT-910. ADDITOL® P 963 contiene 5% de sustancia activa y ha sido diseñado para uso en interiores y exteriores. ADDITOL® P 963 se manipula fáci...Vea Mas ADDITOL® P 963 es un concentrado de color de catalizador para utilizar en sistemas híbridos, de TGIC o Araldite® PT-910. ADDITOL® P 963 contiene 5% de sustancia activa y ha sido diseñado para uso en interiores y exteriores. ADDITOL® P 963 se manipula fácilmente y mejora enormemente la dispersión del catalizador en formulaciones de revestimiento en polvo. Vea Menos | Request Sample |
| ADDITOL® P 964 | Allnex | ADDITOL® P 964 es un concentrado de color de catalizador para utilizar en sistemas híbridos, de TGIC o Araldite® PT-910. Contiene 5% de sustancia activa y ha sido diseñado para uso en interiores y exteriores. ADDITOL® P 964 se manipula fácilmente y mejora...Vea Mas ADDITOL® P 964 es un concentrado de color de catalizador para utilizar en sistemas híbridos, de TGIC o Araldite® PT-910. Contiene 5% de sustancia activa y ha sido diseñado para uso en interiores y exteriores. ADDITOL® P 964 se manipula fácilmente y mejora enormemente la dispersión del catalizador en revestimientos en polvo. Vea Menos | Request Sample |
| ADDITOL® P 966 | Allnex | ADDITOL® P 966 es un concentrado de color de catalizador para utilizar en sistemas de TGIC o Araldite® PT-910. Esta resina contiene 5% de sustancia activa en una matriz de resina de poliéster súper durable. ADDITOL® P 966 es fácilmente manipulable y mejor...Vea Mas ADDITOL® P 966 es un concentrado de color de catalizador para utilizar en sistemas de TGIC o Araldite® PT-910. Esta resina contiene 5% de sustancia activa en una matriz de resina de poliéster súper durable. ADDITOL® P 966 es fácilmente manipulable y mejora enormemente la dispersión del catalizador en formulaciones de revestimiento en polvo cuando se mezcla con resinas súper durables. Este material también puede utilizarse con CRYLCOAT® 4420-0 y CRYLCOAT® 4430-0 en diversos niveles en sistemas de mezcla seca para lograr valores ajustables de brillo bajo. Vea Menos | Request Sample |
| ADDITOL® VXK 6365 | Allnex | ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to chec...Vea Mas ADDITOL® VXK 6365 increases the reactivity of polyisocyanates (blocked or not) with aqueous hydrofunctional binders. An enhanced reactivity of 2-pack isocyanate crosslinkable systems can negatively affect their storage stability. It is recommended to check compatibility and potlife. Vea Menos | Request Sample |
| Ammoniumpersulfat Mit 0.5% Aerosil | Büfa Chemikalien GmbH & Co.KG | Ammoniumpersulfat Mit 0.5% Aerosil (Ammoniumperoxodisulfat) is an odorless, white to slightly yellow crystalline powder. | |
| Barium Neodecanoate (EGECat Ba 10%) | EGE Kimya San ve Tic A.S. | Barium Neodecanoate (EGECat Ba 10%) is a clear liquid that consists of neodecanoic acid barium salt. This product is typically used as a replacement for lead (Pb) in free coatings. It also helps promote thorough drying, good pigment wetting properties, an...Vea Mas Barium Neodecanoate (EGECat Ba 10%) is a clear liquid that consists of neodecanoic acid barium salt. This product is typically used as a replacement for lead (Pb) in free coatings. It also helps promote thorough drying, good pigment wetting properties, and it can increase the stability of the coating. Vea Menos | |
| Barium Neodecanoate (EGECat Ba 12.5%) | EGE Kimya San ve Tic A.S. | Barium Neodecanoate (EGECat Ba 12.5%) is a clear liquid that consists of neodecanoic acid barium salt. This product is typically used as a replacement for lead (Pb) in free coatings. It also helps promote thorough drying, good pigment wetting properties, ...Vea Mas Barium Neodecanoate (EGECat Ba 12.5%) is a clear liquid that consists of neodecanoic acid barium salt. This product is typically used as a replacement for lead (Pb) in free coatings. It also helps promote thorough drying, good pigment wetting properties, and it can increase the stability of the coating. Vea Menos | |
| Basic Chromic Acetate Powder | McGean-Rohco, Inc. | Basic Chromic Acetate Powder is used in pigments, drilling muds, textile mordants, leather tanning, and as catalysts for oxidation, polymerization, and emulsion hardening. | |
| Basic Chromic Sulfate Solution | McGean-Rohco, Inc. | Basic Chromic Sulfate Solution is a dark green solution. Uses include metal finishing, pigments, textile mordants, leather tanning, and catalysts. | |
| Bayoxide® Z active | OMG Borchers GmbH | El Bayoxide® Z activo es un óxido de zinc que se obtiene por precipitación. Es altamente disperso y extremadamente reactivo. Debido a su estructura microscópica, esta sustancia es un interesante aditivo para el sector de revestimientos. Se utiliza como ma...Vea Mas El Bayoxide® Z activo es un óxido de zinc que se obtiene por precipitación. Es altamente disperso y extremadamente reactivo. Debido a su estructura microscópica, esta sustancia es un interesante aditivo para el sector de revestimientos. Se utiliza como materia prima para revestimientos a base de aglutinantes que son compatibles con el óxido de zinc. Vea Menos | |
| Bismuth Octoate (EGECat Bi 24%) | EGE Kimya San ve Tic A.S. | Bismuth Octoate (EGECat Bi 24%) is a catalyst that is used in polyurethane applications. This product is soluble in organic solvent and oils, and has a bismuth metal content of 24% and a total solids content of 100%. | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® PTE es ampliamente utilizado en la activación de resinas acrílicas a base de MMA, poliésteres insaturados a base de estireno y formulaciones de metacrilato de éster de vinilo. Este producto tiene un valor de amina de 250 a 264 mg KOH/g, un número...Vea Mas Bisomer® PTE es ampliamente utilizado en la activación de resinas acrílicas a base de MMA, poliésteres insaturados a base de estireno y formulaciones de metacrilato de éster de vinilo. Este producto tiene un valor de amina de 250 a 264 mg KOH/g, un número de color Gardner de 15 como máx. y un peso molecular (prom.) de 217 g/mol. Bisomer® PTE es una amina terciaria aromática utilizada como activador de amina para la iniciación de peróxido orgánico, ideal para usar en formulaciones con peróxido de dibenzoílo (BPO). Tiene reducida toxicidad. Bisomer® PTE se utiliza ampliamente para activar resinas acrílicas a base de MMA, poliésteres insaturados a base de estireno y formulaciones de metacrilato éster de vinilo. Es ideal para usar en una amplia gama de aplicaciones, incluidos pisos acrílicos, adhesivos, anclajes químicos, pinturas de señalización de carreteras, pernos de anclaje y morteros químicos. Vea Menos | |
| Borchi® Kat 0243 | OMG Borchers GmbH | Borchi® Kat 0243 es un catalizador sin estaño a base de carboxilato que se utiliza como acelerador en los revestimientos de poliuretano de dos componentes a base de disolventes. No tiene agentes de complejos orgánicos y puede utilizarse como reemplazo seg...Vea Mas Borchi® Kat 0243 es un catalizador sin estaño a base de carboxilato que se utiliza como acelerador en los revestimientos de poliuretano de dos componentes a base de disolventes. No tiene agentes de complejos orgánicos y puede utilizarse como reemplazo seguro de otros catalizadores de poliuretano, especialmente, de aminas terciarias y dilaurato de dibutilestaño (DBTL). Borchi® Kat 0243 acelera la reacción química entre el alcohol y el componente de isocianato de los sistemas de revestimiento de poliuretano; este ayuda a tener un control óptimo de las propiedades de secado, tanto del secado final como del curado a temperatura ambiente. En los sistemas de revestimientos pigmentados, la actividad catalítica puede disminuir después del almacenamiento prolongado. Vea Menos | |
| Borchi® Kat 0244 | OMG Borchers GmbH | Borchi® Kat 0244 es un catalizador sin estaño a base de carboxilato que se utiliza como acelerador en los revestimientos de poliuretano de dos componentes a base de disolventes. No tiene agentes de complejos orgánicos y puede utilizarse como reemplazo seg...Vea Mas Borchi® Kat 0244 es un catalizador sin estaño a base de carboxilato que se utiliza como acelerador en los revestimientos de poliuretano de dos componentes a base de disolventes. No tiene agentes de complejos orgánicos y puede utilizarse como reemplazo seguro de otros catalizadores de poliuretano, especialmente, de aminas terciarias y dilaurato de dibutilestaño (DBTL). El uso de Borchi® Kat 0244 garantiza una rápida estabilidad de bloqueo en los revestimientos de poliuretano. También mejora la resistencia a los disolventes, la excelente dureza de la película y la capacidad de lijado del revestimiento. Este producto es apto para restaurar automóviles. En los sistemas de revestimientos pigmentados, la actividad catalítica puede disminuir después del almacenamiento prolongado. Vea Menos | |
| Borchi® Kat 0245 | OMG Borchers GmbH | Borchi® Kat 0245 es un catalizador sin estaño a base de carboxilato metálico que se utiliza como acelerador en los revestimientos de poliuretano de uno y dos componentes a base de disolventes. No tiene agentes de complejos orgánicos y puede utilizarse com...Vea Mas Borchi® Kat 0245 es un catalizador sin estaño a base de carboxilato metálico que se utiliza como acelerador en los revestimientos de poliuretano de uno y dos componentes a base de disolventes. No tiene agentes de complejos orgánicos y puede utilizarse como reemplazo seguro de otros catalizadores de poliuretano, especialmente, de aminas terciarias y dilaurato de dibutilestaño (DBTL). Este producto es apto para restaurar automóviles y para usar en revestimientos industriales. En estas fórmulas, Borchi® Kat 0245 se caracteriza por su excelente y constante actividad y estabilidad, incluso después de un almacenamiento prolongado. Vea Menos | |
| Borchi® Kat 0761 | OMG Borchers GmbH | Borchi® Kat 0761 es un catalizador sin contenido de estaño a base de neodecanoato de cinc. Es un acelerador para revestimientos de poliuretano de uno y dos componentes a base de solventes y sistemas de revestimiento de bobinas a base de poliuretano. Borch...Vea Mas Borchi® Kat 0761 es un catalizador sin contenido de estaño a base de neodecanoato de cinc. Es un acelerador para revestimientos de poliuretano de uno y dos componentes a base de solventes y sistemas de revestimiento de bobinas a base de poliuretano. Borchi® Kat 0761 no contiene compuestos organometálicos ni agentes complejos orgánicos. Borchi® Kat 0761 es un reemplazo ecológico seguro para otros catalizadores de poliuretano, especialmente para aminas terciarias y compuestos orgánicos de estaño, como el DBTL. Borchi® Kat 0761 es adecuado para revestimientos claros de poliuretano a base de solventes de uno y dos componentes y sistemas de revestimiento pigmentados, por ejemplo acabado de automóviles y revestimientos industriales como también pinturas de revestimiento de bobinas a base de sistemas con isocianatos bloqueados. Es esta aplicación Borchi® Kat 0761 brinda una alta actividad catalítica. Vea Menos | |
| Borchi® Kat 15 | OMG Borchers GmbH | Borchi® Kat 15 es un catalizador sin estaño a base de neodecanoato de cinc. Es un acelerador para revestimientos de poliuretano de uno y dos componentes a base de solventes y sistemas de revestimientos de bobinas a base de poliuretano. Este producto no co...Vea Mas Borchi® Kat 15 es un catalizador sin estaño a base de neodecanoato de cinc. Es un acelerador para revestimientos de poliuretano de uno y dos componentes a base de solventes y sistemas de revestimientos de bobinas a base de poliuretano. Este producto no contiene agentes formadores de complejos orgánicos y puede utilizarse como reemplazo ecológicamente seguro de otros catalizadores de poliuretano, especialmente para aminas terciarias y dilaurato de dibutilestaño (DBTL). Vea Menos | |
| Borchi® Kat 22 | OMG Borchers GmbH | Borchi® Kat 22 es un catalizador sin estaño a base de carboxilato metálico. Es un acelerador que se puede usar en los revestimientos de uno y dos componentes a base de disolventes y en los sistemas de revestimientos para bobinas a base de poliuretano. Est...Vea Mas Borchi® Kat 22 es un catalizador sin estaño a base de carboxilato metálico. Es un acelerador que se puede usar en los revestimientos de uno y dos componentes a base de disolventes y en los sistemas de revestimientos para bobinas a base de poliuretano. Este producto no contiene agentes formadores de complejos orgánicos y puede utilizarse como reemplazo ecológicamente seguro de otros catalizadores de poliuretano, especialmente, de aminas terciarias y dilaurato de dibutilestaño (DBTL). Vea Menos | |
| Borchi® Kat 24 | OMG Borchers GmbH | Borchi® Kat 24 es un catalizador sin estaño, altamente reactivo, a base de carboxilato metálico que se utiliza como acelerador en revestimientos de poliuretano de uno y dos componentes a base de disolventes y en revestimientos esmaltados al horno a base d...Vea Mas Borchi® Kat 24 es un catalizador sin estaño, altamente reactivo, a base de carboxilato metálico que se utiliza como acelerador en revestimientos de poliuretano de uno y dos componentes a base de disolventes y en revestimientos esmaltados al horno a base de isocianatos bloqueados. No contiene agentes formadores de complejos orgánicos adicionales. Este producto puede utilizarse como reemplazo ecológicamente seguro de otros catalizadores de poliuretano, especialmente, de aminas y productos a base de estaño, como el dilaurato de dibutilestaño (DBTL). Este producto es apto para usar en revestimientos para reparación de automóviles, revestimientos industriales y revestimientos para bobinas con isocianatos bloqueados. Vea Menos | |
| Borchi® Kat 28 | OMG Borchers GmbH | Borchi® Kat 28 es un octoato de estaño estabilizado con un contenido metálico de aproximadamente el 28 % por peso y es soluble en la mayoría de los disolventes orgánicos. Es un líquido transparente sin disolventes y de baja viscosidad. Este producto no co...Vea Mas Borchi® Kat 28 es un octoato de estaño estabilizado con un contenido metálico de aproximadamente el 28 % por peso y es soluble en la mayoría de los disolventes orgánicos. Es un líquido transparente sin disolventes y de baja viscosidad. Este producto no contiene agentes formadores de complejos orgánicos adicionales. Permite realizar un control óptimo de las propiedades de secado, tanto durante el secado final como durante el curado a temperatura ambiente. Vea Menos | |
| Borchi® Kat 315 | OMG Borchers GmbH | Borchi® Kat 315 es un catalizador sin estaño altamente reactivo a base de neodecanoato de bismuto que se utiliza como acelerador en sistemas de poliuretano de uno y dos componentes a base de solventes y en esmaltes de secado al horno a base de isocianatos...Vea Mas Borchi® Kat 315 es un catalizador sin estaño altamente reactivo a base de neodecanoato de bismuto que se utiliza como acelerador en sistemas de poliuretano de uno y dos componentes a base de solventes y en esmaltes de secado al horno a base de isocianatos bloqueados. Además. Borchi® Kat 315 puede utilizarse en la catálisis de espumas PU, así como en resinas de silicona RTV. Este catalizador no contiene agentes complejantes orgánicos adicionales. Borchi® Kat 315 puede utilizarse como un reemplazo ecológicamente seguro de otros catalizadores de poliuretano, especialmente en aminas y productos a base de estaño como DBTL. Vea Menos | |
| Borchi® Kat 320 | OMG Borchers GmbH | Borchi® Kat 320 es un catalizador sin estaño altamente reactivo a base de bismuto 2-etilhexanoato que se utiliza como acelerador en sistemas de poliuretano de uno y dos componentes a base de solventes y en esmaltes de secado al horno a base de isocianatos...Vea Mas Borchi® Kat 320 es un catalizador sin estaño altamente reactivo a base de bismuto 2-etilhexanoato que se utiliza como acelerador en sistemas de poliuretano de uno y dos componentes a base de solventes y en esmaltes de secado al horno a base de isocianatos bloqueados. Además. Borchi® Kat 320 puede utilizarse en la catálisis de espumas PU, así como en resinas de silicona RTV. Este catalizador no contiene agentes complejantes orgánicos adicionales. Borchi® Kat 320 puede utilizarse como un reemplazo ecológicamente seguro de otros catalizadores de poliuretano, especialmente en aminas y productos a base de estaño como DBTL. Vea Menos | |
| Borchi® OXY - Coat | OMG Borchers GmbH | Borchi® OXY - Coat es un catalizador a base de metal que presenta un excelente rendimiento a niveles de uso bajos. En comparación directa con secantes a base de cobalto, se observan mejoras en relación con la actividad de secado, el rendimiento del color,...Vea Mas Borchi® OXY - Coat es un catalizador a base de metal que presenta un excelente rendimiento a niveles de uso bajos. En comparación directa con secantes a base de cobalto, se observan mejoras en relación con la actividad de secado, el rendimiento del color, el brillo y la turbidez. Este catalizador puede conferir excelentes resultados bajo condiciones adversas. Este producto puede utilizarse en todos los revestimientos que secados por oxidación, como productos alquídicos, aceites vegetales, ésteres epoxi, polibutadieno, etc. Vea Menos | |
| Borchi® OXY - Coat 1101 | OMG Borchers GmbH | Borchi® OXY - Coat 1101 es un catalizador a base de metal que ofrece un excelente rendimiento si se utiliza en pequeñas cantidades. Comparado con los secadores a base de cobalto, ofrece notables mejoras en cuanto a la actividad de secado, resistencia del ...Vea Mas Borchi® OXY - Coat 1101 es un catalizador a base de metal que ofrece un excelente rendimiento si se utiliza en pequeñas cantidades. Comparado con los secadores a base de cobalto, ofrece notables mejoras en cuanto a la actividad de secado, resistencia del color, brillo y opacidad. Se pueden obtener excelentes resultados incluso en condiciones adversas. Este producto se puede usar en cualquier revestimiento de secado por reticulación oxidativa, por ejemplo, alquídicos, aceites vegetales, ésteres epoxi, polibutadieno, etc. Vea Menos | |
| Butaflow BT-71 | Estron Chemical, Inc. | Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorp...Vea Mas Butaflow BT-71 is a tin-based catalyst comprised of dibutyltin dilaurate adsorbed onto a silica carrier. This product may be used in both e-caprolactam blocked polyurethane powder coatings and internally blocked uretdione systems. Butaflow BT-71 is incorporated as a raw material during the premix stage of processing, and a laboratory investigation is recommended to optimize the concentration and processing conditions for a particular formulation. Vea Menos | |
| BYK®-CATALYST 450 | BYK | Catalizador acido para sistemas transmitidos por solvente y de pintura acuosa. Solución de una sal de la amina de ácido sulfónico de para-tolueno. | |
| Chrome Nitrate Solution, 11.5% Chrome | McGean-Rohco, Inc. | Chrome Nitrate Solution, 11.5% Chrome is used in pigments, metal finishing, and catalyst applications. | |
| Chrome Nitrate Solution, 8.5% Chrome | McGean-Rohco, Inc. | Chrome Nitrate Solution, 8.5% Chrome is used in catalysts, pigments, metal finishing, and catalyst applications. | |
| Chrome Nitrate Solution, 9.6% Chrome | McGean-Rohco, Inc. | Chrome Nitrate Solution, 9.6% Chrome is used in pigments, metal finishing, and catalyst applications. | |
| Chromic Acetate Solution | McGean-Rohco, Inc. | Chromic Acetate Solution is used in pigments, drilling muds, textile mordants, leather tanning, and as catalysts for oxidation, polymerization, and emulsion hardening. | |
| Chromic Acid | Qingdao Sun Chemical Corporation Limited | Chromic Acid is widely used in chromium plating, wood preservation, medicine, catalyst, pigment, oxidizing agent, glass coloring and mordant of textile, as well as in material producing oxidative catalyst. This product is supplied in dark red flakes, has ...Vea Mas Chromic Acid is widely used in chromium plating, wood preservation, medicine, catalyst, pigment, oxidizing agent, glass coloring and mordant of textile, as well as in material producing oxidative catalyst. This product is supplied in dark red flakes, has a melting point of 197°C(starts to decompose), and has a specific gravity of 2.70g/cm^3. It has strong oxidation, deliquescer readily in air, and highly soluble in water. Vea Menos | |
| Chromium Acetylacetonate | McGean-Rohco, Inc. | Chromium Acetylacetonate is used in the preparation of organic chromium compounds, especially for use as catalysts. This compound is very soluble in most organic solvents including Isopropyl Alcohol, Toluene, Methanol, but this compound is not readily sol...Vea Mas Chromium Acetylacetonate is used in the preparation of organic chromium compounds, especially for use as catalysts. This compound is very soluble in most organic solvents including Isopropyl Alcohol, Toluene, Methanol, but this compound is not readily soluble in water. Vea Menos | |
| Chromium Tartrate Solution | McGean-Rohco, Inc. | Chromium Tartrate Solution is used as mordants in textile dyeing, chrome conversion coatings, hydrogenation catalysts and anti-foulants for oil field applications. | |
| Cobalt Neodecanoate (EGECat Co 10%) | EGE Kimya San ve Tic A.S. | Cobalt Neodecanoate (EGECat Co 10%) is a strong oxidation catalyst that consists of neodecanoic acid and cobalt salt. This product is often used as a polyester accelerator in UPR systems. It is soluble in organic solvent and oils, and has a cobalt metal c...Vea Mas Cobalt Neodecanoate (EGECat Co 10%) is a strong oxidation catalyst that consists of neodecanoic acid and cobalt salt. This product is often used as a polyester accelerator in UPR systems. It is soluble in organic solvent and oils, and has a cobalt metal content of 10% and a total solids content of 60%. Vea Menos | |
| Cobalt Neodecanoate (EGECat Co 12%) | EGE Kimya San ve Tic A.S. | Cobalt Neodecanoate (EGECat Co 12%) is a strong oxidation catalyst that consists of neodecanoic acid and cobalt salt. This product is often used as a polyester accelerator in UPR systems. It is soluble in organic solvent and oils, and has a cobalt metal c...Vea Mas Cobalt Neodecanoate (EGECat Co 12%) is a strong oxidation catalyst that consists of neodecanoic acid and cobalt salt. This product is often used as a polyester accelerator in UPR systems. It is soluble in organic solvent and oils, and has a cobalt metal content of 12% and a total solids content of 74%. Vea Menos | |
| Cobalt Octoate (EGECat Co 0.5%, in Styrene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 0.5%, in Styrene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 0.5% and a total solids content of 5%. | |
| Cobalt Octoate (EGECat Co 0.5%, in TXIB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 0.5%, in TXIB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 0.5% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 0.5%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 0.5%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 0.5% and a total solids content of 5%. | |
| Cobalt Octoate (EGECat Co 0.5%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 0.5%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 0.5% and a total solids content of 5%. | |
| Cobalt Octoate (EGECat Co 1%, in Styrene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in Styrene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 6%. | |
| Cobalt Octoate (EGECat Co 1%, in Toluene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in Toluene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 5%. | |
| Cobalt Octoate (EGECat Co 1%, in TXIB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in TXIB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 1%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 10%. | |
| Cobalt Octoate (EGECat Co 1%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 1%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 1% and a total solids content of 10%. | |
| Cobalt Octoate (EGECat Co 10%, in Toluene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 10%, in Toluene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 10% and a total solids content of 60%. | |
| Cobalt Octoate (EGECat Co 10%, in TXIB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 10%, in TXIB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 10% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 10%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 10%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 10% and a total solids content of 65%. | |
| Cobalt Octoate (EGECat Co 10%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 10%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 10% and a total solids content of 65%. | |
| Cobalt Octoate (EGECat Co 12%, in D60) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 12%, in D60) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 12% and a total solids content of 80%. | |
| Cobalt Octoate (EGECat Co 12%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 12%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 12% and a total solids content of 80%. | |
| Cobalt Octoate (EGECat Co 12%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 12%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 12% and a total solids content of 80%. | |
| Cobalt Octoate (EGECat Co 4%, in Styrene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 4%, in Styrene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 4% and a total solids content of 25%. | |
| Cobalt Octoate (EGECat Co 6%, in Spindle Oil) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in Spindle Oil) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 6%, in Toluene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in Toluene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 37%. | |
| Cobalt Octoate (EGECat Co 6%, in TXIB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in TXIB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 100%. | |
| Cobalt Octoate (EGECat Co 6%, in WS) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in WS) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 37%. | |
| Cobalt Octoate (EGECat Co 6%, in Xylene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 6%, in Xylene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 6% and a total solids content of 37%. | |
| Cobalt Octoate (EGECat Co 8%, in Toluene) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co 8%, in Toluene) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 8% and a total solids content of 45%. | |
| Cobalt Octoate (EGECat Co XB) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co XB) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. This product is a clear liquid that has a total solids content of 40%. | |
| Cobalt Octoate (EGECat Co XB-1) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co XB-1) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. It has a cobalt metal content of 4% and a total solids content of 45%. | |
| Cobalt Octoate (EGECat Co XC) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co XC) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. This product is a clear liquid that has a total solids content of 45%. | |
| Cobalt Octoate (EGECat Co XF) | EGE Kimya San ve Tic A.S. | Cobalt Octoate (EGECat Co XF) is a strong oxidation catalyst that is often used as a polyester accelerator in UPR systems. This product is a clear liquid that has a total solids content of 30%. | |
| Copper Octoate (EGECat Copper 6%) | EGE Kimya San ve Tic A.S. | Copper Octoate (EGECat Copper 6%) is a clear liquid that consists of copper octoate. This product is often used as a fungicide in dispersion-based wood coatings. It is soluble in organic solvent and oils and contains 6% copper (Cu) metal. | |
| CYCAT® 296-9 | Allnex | CYCAT® 296-9 es un exclusivo líquido catalizador ácido, de color claro, desarrollado para acelerar el curado de resinas amino Cymel a temperaturas de horneado normales, y para permitir el curado de acabados y esmaltes dentro de rangos de temperatura rela...Vea Mas CYCAT® 296-9 es un exclusivo líquido catalizador ácido, de color claro, desarrollado para acelerar el curado de resinas amino Cymel a temperaturas de horneado normales, y para permitir el curado de acabados y esmaltes dentro de rangos de temperatura relativamente bajas. Los revestimientos que contienen el catalizador CYCAT® 296-9 pueden curarse en cronogramas de horneado a baja temperatura a la misma dureza que los sistemas no catalizados similares que requieren temperaturas más altas. Dado que la resistencia a la corrosión de los acabados que contienen altos niveles de catalizador puede verse disminuida, las propiedades de resistencia deben ser cuidadosamente revisadas. Vea Menos | Request Sample |
| CYCAT® 4040 | Allnex | El catalizador CYCAT® 4040 es un material catalítico muy versátil, especialmente formulado para mantener la uniformidad de resistencia para el uso en diversos vehículos termoestables a base de agua y solubles en solventes. Se recomienda especialmente dond...Vea Mas El catalizador CYCAT® 4040 es un material catalítico muy versátil, especialmente formulado para mantener la uniformidad de resistencia para el uso en diversos vehículos termoestables a base de agua y solubles en solventes. Se recomienda especialmente donde se requiere un catalizador ácido potente para acelerar el curado de los sistemas reticulados de melamina-formaldehído altamente alquilados y para reducir la temperatura de curado de sistemas de resinas de urea. Vea Menos | Request Sample |
| CYCAT® 4045 | Allnex | El catalizador CYCAT® 4045 es un catalizador de ácido sulfónico para-tolueno de amina bloqueada. Se recomienda para acelerar la respuesta de curado de resinas de reticulación de amino mientras que proporciona una mayor estabilidad a la formulación en comp...Vea Mas El catalizador CYCAT® 4045 es un catalizador de ácido sulfónico para-tolueno de amina bloqueada. Se recomienda para acelerar la respuesta de curado de resinas de reticulación de amino mientras que proporciona una mayor estabilidad a la formulación en comparación con el catalizador CYCAT 4040 de ácido sulfónico para-tolueno sin bloquear. Se recomienda especialmente para el uso con resinas de reticulación de amino altamente alquiladas. Este producto proporciona una excelente estabilidad en sistemas de alto contenido de sólidos y a base de agua, y en estos últimos puede añadirse sin causar la precipitación del aglutinante, lo que a menudo puede ocurrir debido a una caída del pH. Vea Menos | Request Sample |
| CYCAT® 500 | Allnex | El catalizador CYCAT® 500 es un fuerte catalizador de ácido sulfónico. Se recomienda para el uso en aplicaciones de cataforesis para lograr un curado en el rango de 110 a 135 °C en 15 a 30 minutos, o para reducir el tiempo de horneado a temperaturas de ho...Vea Mas El catalizador CYCAT® 500 es un fuerte catalizador de ácido sulfónico. Se recomienda para el uso en aplicaciones de cataforesis para lograr un curado en el rango de 110 a 135 °C en 15 a 30 minutos, o para reducir el tiempo de horneado a temperaturas de horneado superiores. Este producto también se recomienda para revestimientos aplicados mediante otras técnicas, proporcionando mejor adherencia y mejores propiedades de resistencia en comparación con otros catalizadores de tipo ácido sulfónico. Vea Menos | Request Sample |
| CYCAT® 600 | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...Vea Mas CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). Vea Menos | Request Sample |
| CYCAT® 600A | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...Vea Mas CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). Vea Menos | Request Sample |
| CYCAT® 6020 | Allnex | CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...Vea Mas CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor. Vea Menos | Request Sample |
| CYCAT® 6030 | Allnex | CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...Vea Mas CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor. Vea Menos | Request Sample |
| CYCAT® 655 CATALYST | Allnex | CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYC...Vea Mas CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT 655 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT 655 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT 655 is a free acid, package stability could be adversely impacted. Vea Menos | Request Sample |
| CYCAT® 6925 | Allnex | CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are ...Vea Mas CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermoset systems. This product can be used in food contact applications. For the latest information about the compliance status with FDA, EU, Chinese or other food regulations. Vea Menos | Request Sample |
| CYCAT® VXK 6364 | Allnex | CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in s...Vea Mas CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in solvent and waterborne thermosetting vehicles. Vea Menos | Request Sample |
| CYCAT® VXK 6395 | Allnex | CYCAT® VXK 6395 es un catalizador ácido de amina bloqueada. Fue desarrollado para la reacción de reticulación de sistemas de curado de melamina y urea a bajas temperaturas. Las áreas de aplicación típicas son los sistemas de pintura de secado al horno par...Vea Mas CYCAT® VXK 6395 es un catalizador ácido de amina bloqueada. Fue desarrollado para la reacción de reticulación de sistemas de curado de melamina y urea a bajas temperaturas. Las áreas de aplicación típicas son los sistemas de pintura de secado al horno para la industria en general y para sistemas automotrices de OEM. Vea Menos | Request Sample |
| CYCAT® XK 406 N | Allnex | Catalizador ácido. Compatible con las resinas de epóxido de peso molecular alto y la mayoría de los resoles usados en tales combinaciones. | Request Sample |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| DABCO® DC 1 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 1 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. | |
| DABCO® DC 2 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reac...Vea Mas DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reactive than DABCO® DC 1. Vea Menos | |
| DABCO® MB 20 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® MB 20 is a bismuth-based gel catalyst developed for a wide range of urethane formulations. It does not contain 2-EHA, DBT or TBT. | |
| DABCO® NE 1070 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1070 is a low emission gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. | |
| DABCO® NE 1091 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1091 is a highly efficient low emissive gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. It can be used to improve humid aging properties. | |
| DABCO® NE 300 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 300 is a highly efficient low emissive blow catalyst suitable for replacement of BDMAEE catalysts. | |
| DABCO® T 120 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 120 is a strong gel catalyst with good hydrolytic stability. | |
| DMAMP-80® | ANGUS Chemical Company | DMAMP-80® - Solución acuosa que contiene el 80% de 2-dimetilamino-2-metil-1-propanol, es una de las aminas terciarias más potentes disponibles en el mercado. Por ser una base fuerte, DMAMP-80™ puede ser utilizada en sistemas de agua para formulaciones con...Vea Mas DMAMP-80® - Solución acuosa que contiene el 80% de 2-dimetilamino-2-metil-1-propanol, es una de las aminas terciarias más potentes disponibles en el mercado. Por ser una base fuerte, DMAMP-80™ puede ser utilizada en sistemas de agua para formulaciones con excelente transparencia, humectabilidad y estabilidad. Se recomienda para uso como agente emulsificante, inhibidor de corrosión, solubilizante de resinas, catalizador, aditivo y agente de síntesis. Vea Menos | |
| DMCHA | Yantai Suny Chem International Co., Ltd. | Este producto es un catalizador especial para espuma rígida, especialmente para preparar los dos componentes del sistema, no es necesario añadir estaño orgánico en materiales compuestos, es moderado, estable, y ajustable en gran medida. Se puede mantener ...Vea Mas Este producto es un catalizador especial para espuma rígida, especialmente para preparar los dos componentes del sistema, no es necesario añadir estaño orgánico en materiales compuestos, es moderado, estable, y ajustable en gran medida. Se puede mantener durante un largo período de tiempo. Vea Menos | |
| Drocure™ 5130 | D.R. Coats Ink & Resins Pvt. Ltd. | Drocure™ 5130 is a versatile Lewis based catalyst for curing of Epoxy Resins. It is a technical grade of tris-(dimethylaminomethyl) phenol. | |
| Escat™ 110 | Estron Chemical, Inc. | Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy,...Vea Mas Escat™ 110 is an imidazole catalyst supplied in undiluted, 100% active form. It is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, and polyesters cured by GMA functional acrylics. Escat™ 110's benefits include that it is to reduce the cure temperature of a particular system, or shorten the required bake time at a given cure temperature. Vea Menos | |
| Escat™ 22 | Estron Chemical, Inc. | Escat™ 22 is a powder coating additive capable of improving the mechanical and solvent resistance properties. Escat™ 22 can be used in matte polyester powder coatings cured with the Isocryl matting hardeners EP-550, EP-560 and EP-570. | |
| Escat™ 50 | Estron Chemical, Inc. | Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction...Vea Mas Escat™ 50 is a 50% active imidazole catalyst specifically developed to facilitate dispersion and avoid hot spots of the catalyst during powder manufacture. The additive is used to accelerate the cure of powder coatings based on the carboxyl-epoxy reaction, or for pure epoxy systems as well. Its typical systems include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy and polyesters cured by GMA-functional acrylics. Polyester-TGIC and polyester-PT-910 reactions can also be accelerated. Escat™ 50 can reduce the cure temperature of a particular system or shorten the required bake time at a given cure temperature without sacrificing DOI or flow and leveling properties. Vea Menos | |
| ESCAT 50 | Worlée-Chemie G.m.b.H. | ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT ...Vea Mas ESCAT 50 is a substituted imidazole catalyst masterbatched at 50% active level in castor wax. Masterbatching the catalyst in castor wax improves the compatibility during extrusion, which helps to assure its uniform distribution in a powder coating. ESCAT 50 is used in powder coatings to accelerate the cure of systems based on the reaction of an epoxy functional resin with a carboxyl functional curing agent. Typical systems are epoxy/polyester hybrids, epoxy/acrylic hybrids, TGIC/polyester systems and epoxy-functional acrylic/carboxyl-functional curing agent systems. It can also be used to accelerate the cure of epoxy systems that are cured by dicyanamide. Vea Menos | |
| Escat™ 60 | Estron Chemical, Inc. | Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 6...Vea Mas Escat™ 60 is a purified imidazole catalyst absorbed onto a silica carrier. The product is used to accelerate the cure of powder coatings that are responsive to imidazole catalysis. Some example powder coating chemistries that can be catalyzed with ESCAT 60 include hybrids such as polyester-epoxy, carboxyl acrylic-epoxy, polyesters cured by GMA-functional acrylics, polyester-TGIC and polyester-PT-910. Escat™ 60 reduces the cure temperature of a particular system and shortens the required bake time at a given cure temperature when compared to non-catalyzed systems. Vea Menos |
