UL Prospector
Prospector

Éxito!

Su búsqueda se ha guardado exitosamente
107 Resultados
1,2-Bis(Tetrabromophthalimido) Ethane Hainan Zhongxin Chemical Co., Ltd. 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC a...Vea Mas 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC alloy, PC, LDPE and PBT. Vea Menos
Ammonium Polyphosphate(APP) Shifang Changfeng Chemical Co., Ltd. Ammonium Polyphosphate (APP) is a highly efficient, nontoxic inorganic flame retardant. This product has a low water solubility, and a high phosphorus and nitrogen content. Ammonium Polyphosphate (APP) is most commonly used as a flameproof coating for mul...Vea Mas Ammonium Polyphosphate (APP) is a highly efficient, nontoxic inorganic flame retardant. This product has a low water solubility, and a high phosphorus and nitrogen content. Ammonium Polyphosphate (APP) is most commonly used as a flameproof coating for multistory buildings, ships, trains, and cable applications. Vea Menos
Ammonium Polyphosphate(Phase II) Shifang Changfeng Chemical Co., Ltd. Ammonium Polyphosphate(Phase II) is a non halogen flame retardant. This product decomposes to a polymeric acid and ammonia when exposed to fire or heat. Ammonium Polyphosphate(Phase II) is most commonly used in plastics (PP, PVC, and PE), polyesters, rubb...Vea Mas Ammonium Polyphosphate(Phase II) is a non halogen flame retardant. This product decomposes to a polymeric acid and ammonia when exposed to fire or heat. Ammonium Polyphosphate(Phase II) is most commonly used in plastics (PP, PVC, and PE), polyesters, rubber, and expandable fireproof coating. Vea Menos
Ammonium Polyphosphate(phase-II) treated by epoxy resin Shifang Changfeng Chemical Co., Ltd. Ammonium Polyphosphate(phase-II) treated by epoxy resin solubility in water is very low and has less influence in polymers. This product is most commonly used in epoxy resin, polyurethane, and textile coating applications.
Antimony Trioxide Hainan Zhongxin Chemical Co., Ltd. Antimony Trioxide is a fine white powder with a particle size of about 0.8 - 1.2um, and is 99.5% pure. It is primarily used as a flame retardant in plastics, rubber, paints, paper, textiles, and electronics. It can also be used as a catalyst, a clarifyin...Vea Mas Antimony Trioxide is a fine white powder with a particle size of about 0.8 - 1.2um, and is 99.5% pure. It is primarily used as a flame retardant in plastics, rubber, paints, paper, textiles, and electronics. It can also be used as a catalyst, a clarifying agent for glass, an opacifier for porcelain and enamel, and a white pigment for paint. Vea Menos
Brominated Epoxy Oligomers Hainan Zhongxin Chemical Co., Ltd. Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...Vea Mas Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. Vea Menos
Brominated Polystyrene Hainan Zhongxin Chemical Co., Ltd. Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...Vea Mas Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. Vea Menos
BurnEx™ 30-107 Nyacol Nano Technology BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coati...Vea Mas BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coatings, and water-based systems. Vea Menos
BurnEx™ A1582 Nyacol Nano Technology BurnEx™ A1582, a Nano-Dispersible Dry Powder Colloidal Antimony Pentoxide Flame Retardant Additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in flexible vinyl and thermoplastic polyester.
BurnEx™ ADP480 Nyacol Nano Technology BurnEx™ ADP480 a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Polyolefins, HIPS, and Adhesives
BurnEx™ ADP494 Nyacol Nano Technology BurnEx™ ADP494, a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Solution-spun fibers, ABS, Epoxy-ketones.
BurnEx Plus™ A1588LP Nyacol Nano Technology BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatin...Vea Mas BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatings, and water-based systems. Vea Menos
BurnEx Plus™ A1590 Nyacol Nano Technology BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings...Vea Mas BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings, and water-based systems. Vea Menos
BurnEx™ ZTA Nyacol Nano Technology BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...Vea Mas BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. Vea Menos
CF-APP203 Silane Modified APP Shifang Changfeng Chemical Co., Ltd. CF-APP203 Silane Modified APP is flame retardant based on phosphorus /nitrogen synergism. This product is has a lower solubility in water and viscosity. CF-APP203 Silane Modified APP is most commonly used in fiber, polymer, plastics, and fire-refractory b...Vea Mas CF-APP203 Silane Modified APP is flame retardant based on phosphorus /nitrogen synergism. This product is has a lower solubility in water and viscosity. CF-APP203 Silane Modified APP is most commonly used in fiber, polymer, plastics, and fire-refractory building board applications. Vea Menos
Decabromodiphenyl Oxide ChemCeed El óxido de decabromodifenilo se usa como retardador de llama para elastómeros, alambres y cables, revestimientos textiles, equipos eléctricos y electrónicos, repuestos automotrices y materiales de construcción.
Decabromodiphenyl Oxide Hainan Zhongxin Chemical Co., Ltd. Decabromodiphenyl Oxide (DBDPO) is a white powder with an average particle size of 3µm and contains between 82-83% Br. It is primarily used as a broad spectrum flame retardant and is widely used in the production of rubber, textile, plastics and paint. De...Vea Mas Decabromodiphenyl Oxide (DBDPO) is a white powder with an average particle size of 3µm and contains between 82-83% Br. It is primarily used as a broad spectrum flame retardant and is widely used in the production of rubber, textile, plastics and paint. Decabromodiphenyl Oxide is recommended for use in products containing polyethylene polypropylene, ABS resins, PBT resins, and rubber. Vea Menos
Diammonium phosphate(DAP) Shifang Changfeng Chemical Co., Ltd. Diammonium phosphate(DAP)is a white sand like fire retardant crystal. This product is easily soluble in water. Diammonium phosphate(DAP)is most commonly used as a fire-proof agent additive for wood, paper, fabric, used in manufacturing late making, medici...Vea Mas Diammonium phosphate(DAP)is a white sand like fire retardant crystal. This product is easily soluble in water. Diammonium phosphate(DAP)is most commonly used as a fire-proof agent additive for wood, paper, fabric, used in manufacturing late making, medicine and radio tube, and also used in phosphorus applications. Vea Menos
Disflamoll® TP Rhein Chemie Rheinau GmbH Disflamoll® TP is triphenyl phosphate (TPP) appearing as a white pellet. This low volatility flame retardant is commonly used in polymers and finds application in coatings based on nitrocellulose, phenolic resins, and ABS/PC and PPE/HIPS compounds.
Disflamoll® TP Liquid Rhein Chemie Rheinau GmbH Disflamoll® TP is triphenyl phosphate (TPP) appearing as a liquid. This low volatility flame retardant is commonly used in polymers and finds application in coatings based on nitrocellulose, phenolic resins, and ABS/PC and PPE/HIPS compounds.
DMMP Flame Retardant Yangzhou Chenhua New Material CO., LTD. DMMP Flame Retardant is dimethyl methyl phosphonate, a colorless to yellow, transparent liquid. This product has a specific gravity of 1.16 and a molecular weight of 124.08. This product provides flame retardant properties as a coating.
EcoFlame APP201 Unibrom Corp. EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...Vea Mas EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. Vea Menos
EcoFlame APP202 Unibrom Corp. EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...Vea Mas EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. Vea Menos
EcoFlame APP203 Unibrom Corp. EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...Vea Mas EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. Vea Menos
EcoFlame APP204 Unibrom Corp. EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...Vea Mas EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. Vea Menos
EcoFlame APP205 Unibrom Corp. EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...Vea Mas EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. Vea Menos
EcoFlame B-543 Unibrom Corp. EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...Vea Mas EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. Vea Menos
EcoFlame B-641 Unibrom Corp. EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...Vea Mas EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. Vea Menos
EcoFlame B-641TC Unibrom Corp. EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...Vea Mas EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. Vea Menos
EcoFlame B-680 Unibrom Corp. EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...Vea Mas EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. Vea Menos
EcoFlame B-959 Unibrom Corp. EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...Vea Mas EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. Vea Menos
Ecoret MP Alwernia SA Ecoret MP, a melamine phosphate based on nitrogen-phosphorus, is a halogen-free flame retardant that is a white powder. It is mainly used in fire protection coatings for polymers and paints, epoxy resins, unsaturated polyesters, structural resins, and phe...Vea Mas Ecoret MP, a melamine phosphate based on nitrogen-phosphorus, is a halogen-free flame retardant that is a white powder. It is mainly used in fire protection coatings for polymers and paints, epoxy resins, unsaturated polyesters, structural resins, and phenolic resins. Ecoret MP can be used together with other flame retardants, such as APP (ammonium polyphosphate), or alone. Vea Menos
Ecoret MPYP Alwernia SA Ecoret MPYP, a melamine pyrophosphate based on nitrogen-phosphorus, is a halogen-free flame retardant that is a white powder. It is mainly used in fire protection coatings, unsaturated and structural epoxy resins, textiles, thermoplastic, and partly subst...Vea Mas Ecoret MPYP, a melamine pyrophosphate based on nitrogen-phosphorus, is a halogen-free flame retardant that is a white powder. It is mainly used in fire protection coatings, unsaturated and structural epoxy resins, textiles, thermoplastic, and partly substituting APP (ammonium polyphosphate). Ecoret MPYP can be used together with other flame retardants or alone. Vea Menos
Epokukdo KB-560 Kukdo Chemical Co., Ltd. Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...Vea Mas Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. Vea Menos
Epokukdo KB-562P Kukdo Chemical Co., Ltd. Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...Vea Mas Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. Vea Menos
Epokukdo KB-563P Kukdo Chemical Co., Ltd. Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrica...Vea Mas Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. Vea Menos
Exolit® AP 420 Clariant Plastics & Coatings Ltd. Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short-chain ammonium polyphosphate.
Exolit® AP 422 Clariant Plastics & Coatings Ltd. Exolit® AP 422 is a fine-particle ammonium polyphosphate (phase II) produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colourless, non-hygroscopic and non-flammable.
Exolit® AP 423 Clariant Plastics & Coatings Ltd. Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and ...Vea Mas Exolit® AP 423 is a fine-particle ammonium polyphosphate produced by a special method. The crystal modification is phase II. The product is largely insoluble in water and completely insoluble in organic solvents. It is a white powder, non-hygroscopic and non-flammable. Vea Menos
Exolit® AP 462 Clariant Plastics & Coatings Ltd. Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-parti...Vea Mas Exolit® AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from ammonium polyphosphate by micro-encapsulation with melamine resin according to Clariant’s own method. Exolit® AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. Vea Menos
Exolit® AP 740 Clariant Plastics & Coatings Ltd. Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlor...Vea Mas Exolit® AP 740 is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. Vea Menos
Exolit® AP 740 F Clariant Plastics & Coatings Ltd. Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from c...Vea Mas Exolit® AP 740 F is a white free flowing powder. It is a non-halogenated additive flame retardant based on ammonium polyphosphate which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® AP 740 F differs in its mode of action from chlorine or bromine containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat-insulating effect and reduces further oxygen access. Vea Menos
Exolit® AP 750 Clariant Plastics & Coatings Ltd. Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability....Vea Mas Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat-insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gases, lower formation of toxic smoke gases are of great interest. Vea Menos
Exolit® IFR 36 Clariant Plastics & Coatings Ltd. Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants...Vea Mas Exolit® IFR 36 is a non-halogenated flame retardant based on ammonium polyphosphate, which develops its effectiveness through phosphorus/nitrogen synergism. Exolit® IFR 36 differs in its mode of action from chlorine- or bromine-containing flame retardants by achieving its effect through intumescence. The flame retarded material foams on exposure to flame. The carbon foam layer so formed protects the polymer through its heat insulating effect and reduces further oxygen access. Vea Menos
Flameretarder GO Ichemco Flameretarder GO is a halogen-based flame retardant water dispersion. This product has a total solids content of 68-71% and a Brookfield viscosity at 25°C of 7000-11,000 cPs. Flameretarder GO is most commonly used as a flame resistant coating in fabric,...Vea Mas Flameretarder GO is a halogen-based flame retardant water dispersion. This product has a total solids content of 68-71% and a Brookfield viscosity at 25°C of 7000-11,000 cPs. Flameretarder GO is most commonly used as a flame resistant coating in fabric, fiber, and non-woven applications. Vea Menos
Flameretarder HWF Ichemco Flameretarder HWF is a halogen-free, formadehyde-free, nitrogen-based flame retardant. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 10-50 cPs. Flameretarder HWF is most commonly used as a flame resistant coatin...Vea Mas Flameretarder HWF is a halogen-free, formadehyde-free, nitrogen-based flame retardant. This product has a total solids content of 44-48% and a Brookfield viscosity at 25°C of 10-50 cPs. Flameretarder HWF is most commonly used as a flame resistant coating in natural fiber applications. Vea Menos
FR-245 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine Hainan Zhongxin Chemical Co., Ltd. FR-245 is 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine, synonymous with Tris(Tribromophenoxy)-S-Triazine and Tris(Tribromophenyl)Cyanurate and 2,4,6-Tris-(2,4,6-Tribromophenoxy)-1,3,5-Triazine, is a flame retardant additive used in the production of ...Vea Mas FR-245 is 2,4,6-Tris-(2,4,6-tribromophenoxy)-1,3,5-triazine, synonymous with Tris(Tribromophenoxy)-S-Triazine and Tris(Tribromophenyl)Cyanurate and 2,4,6-Tris-(2,4,6-Tribromophenoxy)-1,3,5-Triazine, is a flame retardant additive used in the production of paints and plastics. FR-245 is recommend for use in multiple products including: ABS, HIPS, PS, PBT, PP, GF+ABS, GF+PS, GF+PBT, GF+HIPS and GF+PP. Vea Menos
Hexabromocyclododecane Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings.
Isopropylated Triphenyl Phosphate (IPPP) Hainan Zhongxin Chemical Co., Ltd. Isopropylated Triphenyl Phosphate (IPPP) synonymous with Isopropylated phenol phosphate and triisopropylated phenyl phosphate, is a white to yellow transparent liquid used as a flame retardant additive for paints and plastics. It is recommended for use in...Vea Mas Isopropylated Triphenyl Phosphate (IPPP) synonymous with Isopropylated phenol phosphate and triisopropylated phenyl phosphate, is a white to yellow transparent liquid used as a flame retardant additive for paints and plastics. It is recommended for use in PVC, fiber resin, synthetic rubber, pressure oil fields. Vea Menos
JLS-APP ChemFine International Co., Ltd. JLS-APP, also known as ammonium polyphosphate, is used in intumescent flame retardant coating, as well as polyurethane foam and cellulose.
Melafine® OCI MELAMINE Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consist...Vea Mas Melafine®, in the form of a white crystalline powder, is a fine-grade melamine. This product can be used in high-performance intumescent coatings. During the intumescent process, Melafine® acts as a blowing agent, which releases gases that enhance consistent formation and expansion of a rigid carbon matrix that protects the substrate from further heat and damage. Vea Menos
Melamine Cyanurate (MCA) Hainan Zhongxin Chemical Co., Ltd. Melamine Cyanurate (MCA) is a white powder that is 99.5% pure. It is primarily used as a flame retardant additive in paints and plastic. Melamine Cyanurate is recommend for use in multiple products including: nylon-66, rubbers, synthetic resins (poly viny...Vea Mas Melamine Cyanurate (MCA) is a white powder that is 99.5% pure. It is primarily used as a flame retardant additive in paints and plastic. Melamine Cyanurate is recommend for use in multiple products including: nylon-66, rubbers, synthetic resins (poly vinyl chloride, polystyrene, polyamide, polyoxymethymens ) and acrylic acid emulsion etc. Vea Menos
Melamine Modified APP-II (CF-APP202) Shifang Changfeng Chemical Co., Ltd. Melamine Modified APP-II (CF-APP202) is a flame retardant. This product is based on phosphorus /nitrogen synergism, free formaldehyde,manufactured from CF-APP201. Melamine Modified APP-II (CF-APP202) is most commonly used in plastics(PP, PVC, and PE), pol...Vea Mas Melamine Modified APP-II (CF-APP202) is a flame retardant. This product is based on phosphorus /nitrogen synergism, free formaldehyde,manufactured from CF-APP201. Melamine Modified APP-II (CF-APP202) is most commonly used in plastics(PP, PVC, and PE), polyester, rubber, and expandable fireproof coating applications. Vea Menos
MelaminebyOCI™ GPH OCI MELAMINE MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame reta...Vea Mas MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. Vea Menos
MelaminebyOCI™ GPH-LD OCI MELAMINE MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 mic...Vea Mas MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 microns and has been produced in a low-density gas-phase process. Vea Menos
MelaminebyOCI™ SLP OCI MELAMINE MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, l...Vea Mas MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. Vea Menos
Mileflame FR 20-25 MPI Chemie B.V. Mileflame FR 20-25 is potassium perfluorobutane sulfonate in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications.
Mileflame FR 5060 MPI Chemie B.V. Mileflame FR 5060 is a white crystal powder used as a non-halogenated flame retardant in coating applications.
Mileflame HPCTP MPI Chemie B.V. Mileflame HPCTP is hexaphenoxycyclotriphosphazene in the form of a white crystal powder / flakes. It is used as a non-halogenated flame retardant in coating applications.
Mileflame NP 1000 MPI Chemie B.V. Mileflame NP 1000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. Inorganic fillers, such as glass fiber, calcium carbonate and barium sulphate, will affect the fl...Vea Mas Mileflame NP 1000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications. Inorganic fillers, such as glass fiber, calcium carbonate and barium sulphate, will affect the flame retardancy of this product. Vea Menos
Mileflame NP 2000 MPI Chemie B.V. Mileflame NP 2000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications.
Mileflame NP 3000 MPI Chemie B.V. Mileflame NP 3000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications.
Mileflame NP 4000 MPI Chemie B.V. Mileflame NP 4000 is a proprietary blend of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications.
Mileflame S-1000 MPI Chemie B.V. Mileflame S-1000 is a mixture of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications.
Mileflame S-2000 MPI Chemie B.V. Mileflame S-1000 is a mixture of chemicals in the form of a white powder. It is used as a non-halogenated flame retardant in coating applications.
Monoammonium phosphate (MAP) Shifang Changfeng Chemical Co., Ltd. Monoammonium phosphate (MAP) is a white sand like fire retardant crystal. This product is stable in the air and free soluble in water. Monoammonium phosphate (MAP) is most commonly used in wood, paper, and fabric fire proofing applications.
Nyacol® A1530 Nyacol Nano Technology Nyacol® A1530 is a water-based dispersion of 30nm particle antimony at 29% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings.
Nyacol® A1540N Nyacol Nano Technology Nyacol® A1540N is a water-based dispersion of 30nm particle antimony at 38% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings.
Nyacol® A1550 Nyacol Nano Technology Nyacol® A1550 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 5. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings.
Nyagraph ® 249 Nyacol Nano Technology Nyagraph® 249 is a natural material based on the processing of graphite ore. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings.
Nyagraph® 200 Nyacol Nano Technology Nyagraph® 200 is a natural material based on the processing of graphite ore with a fine particle size of 80%>180 microns. This product is an intumescent flame retardant used in sealants, adhesives, and coatings and has applications in soft ash, plastic.
Nyagraph® 250 Nyacol Nano Technology Nyagraph® 250 is a natural material based on the processing of graphite ore with an expansion volume of >250cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings.
Nyagraph® 251 Nyacol Nano Technology Nyagraph® 251 is a natural material based on the processing of graphite ore with a minimum of 250ml/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings.
Nyagraph® 35 Nyacol Nano Technology Nyagraph® 35 is a natural material based on the processing of graphite ore with an expansion volume of ≥35cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings.
Nyagraph® 351 Nyacol Nano Technology Nyagraph® 351 is a natural material based on the processing of graphite ore with an expansion volume of 330-350cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings.
Nyagraph® FP Nyacol Nano Technology Nyagraph® FP is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g. This product is used in sealants, bitumens, rubbers, adhesives, and coatings.
Nyagraph® KP251 Nyacol Nano Technology Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatin...Vea Mas Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. Vea Menos
Octoguard FR-11 DF Tiarco Chemical Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...Vea Mas Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. Vea Menos
Octoguard FR-13 DF Tiarco Chemical Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...Vea Mas Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. Vea Menos
P-Toluene Sulfonamide (OPTSA) Hainan Zhongxin Chemical Co., Ltd. P-Toluene Sulfonamide (OPTSA) is a white crystalline powder that is 99.5% pure. It is primarily used as a flame retardant additive for paints, inks and plastics. P-Toluene Sulfonamide (OPTSA) can be use as a plasticizer in the production of fluorescent, p...Vea Mas P-Toluene Sulfonamide (OPTSA) is a white crystalline powder that is 99.5% pure. It is primarily used as a flame retardant additive for paints, inks and plastics. P-Toluene Sulfonamide (OPTSA) can be use as a plasticizer in the production of fluorescent, phenolic and polyamide resins. Vea Menos
P-Toluene Sulfonyl Chloride (OPTSC) Hainan Zhongxin Chemical Co., Ltd. P-Toluene Sulfonyl Chloride (OPTSC) is a white crystalline powder that is 99% pure. It is mainly used as an analytical reagent and can be used as a flame retardant additive in paints and plastic. In addition, P-Toluene Sulfonyl Chloride (OPTSC) can also b...Vea Mas P-Toluene Sulfonyl Chloride (OPTSC) is a white crystalline powder that is 99% pure. It is mainly used as an analytical reagent and can be used as a flame retardant additive in paints and plastic. In addition, P-Toluene Sulfonyl Chloride (OPTSC) can also be used in synthesizing organics, hormones, and various dyes. Vea Menos
Phenyl Silane Oligomer Sunicon 6141 Yantai Suny Chem International Co., Ltd. Phenyl Silane Oligomer Sunicon 6141 can provide heat resistance, cold resistance, radiation resistance, weather resistance, rigidity, flame retardant. As an adhesion promoter, it is especially suitable for oil-based systems. It can be used as hydrophobic ...Vea Mas Phenyl Silane Oligomer Sunicon 6141 can provide heat resistance, cold resistance, radiation resistance, weather resistance, rigidity, flame retardant. As an adhesion promoter, it is especially suitable for oil-based systems. It can be used as hydrophobic treatment agent and lubricant for powder. More applications in adhesives, powder coatings, building materials coatings, modification. Vea Menos
Phos-Chek® 720 ICL Phosphate Specialty Phos-Chek® 720 is a very effective flame retardant additive for use the treatment of textiles, leather or paper and as environmental friendly solution in natural insulation material, wood or wood composites. Request Sample
Phos-Chek® P 42 ICL Phosphate Specialty Phos-Chek® P 42 is an effective flame retardant that can be used in intumescent paints and coatings either aqueous or solvent-based. It is also ideal for use in intumescent systems for sealants and grouts, in polymer systems such as polyethylene, polyprop...Vea Mas Phos-Chek® P 42 is an effective flame retardant that can be used in intumescent paints and coatings either aqueous or solvent-based. It is also ideal for use in intumescent systems for sealants and grouts, in polymer systems such as polyethylene, polypropylene, polyurethane, rubber, acrylic and polyterephtalaten. Phos-Chek® P 42 can be used in a wide range of building materials. Vea Menos Request Sample
Phos-Chek® P 42 C ICL Phosphate Specialty Phos-Chek® P 42 C is a flame retardant white powder. It is ideal for use in painting and coatings, intumescent systems for sealants and grouts, and polymer systems such as polyethylene, polypropylene, polyurethane, rubber, Acrylic and Polyterephtalaten. Request Sample
Phos-Chek® P/42 ICL Phosphate Specialty Phos-Chek® P/42 is a white powder, free of visible foreign matter used as a fire retardant additive. It is composed of Ammonium polyphosphate (APP) CAS NO. 68333-79-9. Phos-Chek® is an effective fire retardant additive for applications such as: intumescent...Vea Mas Phos-Chek® P/42 is a white powder, free of visible foreign matter used as a fire retardant additive. It is composed of Ammonium polyphosphate (APP) CAS NO. 68333-79-9. Phos-Chek® is an effective fire retardant additive for applications such as: intumescent paints and coatings, both water-based and solvent-based. It can also be applied to intumescent mastics, caulks, putties, sealants, epoxies, films and adhesives, as well as polymer systems, including those based on polyethylene, polypropylene, polyurethane, rubber, acrylics and polyterephthalates. Building materials such as wall coverings, ceiling tiles, roofing products, wall panels, wood chip board and composites can also be used with the application of Phos-Chek® P/42. Vea Menos Request Sample
Poly(2,6-dibromophenylene oxide) (PBO) Hainan Zhongxin Chemical Co., Ltd. Poly(2,6-dibromophenylene oxide) (PBO) is a light brown powder that contains a minimum of 62% BR. It is primarily used as a flame retardant additive in paints and plastic. Poly(2,6-dibromophenylene oxide) (PBO) has excellent thermal stability with good co...Vea Mas Poly(2,6-dibromophenylene oxide) (PBO) is a light brown powder that contains a minimum of 62% BR. It is primarily used as a flame retardant additive in paints and plastic. Poly(2,6-dibromophenylene oxide) (PBO) has excellent thermal stability with good compatibility with many types of plastic. Vea Menos
R-8004 Siloxane Masterbatch Zhejiang Feidian Chemical Co., Ltd. R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...Vea Mas R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. Vea Menos
R-8005 Siloxane Masterbatch Zhejiang Feidian Chemical Co., Ltd. R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...Vea Mas R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. Vea Menos
Sodium Metasilicate Anhydrous - Special Grade S-25 Occidental Chemical Corp. (OxyChem) Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...Vea Mas Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. Vea Menos
Sodium Metasilicate Pentahydrate - Uniflo ® 26 Occidental Chemical Corp. (OxyChem) Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...Vea Mas Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. Vea Menos
TARGON® G3 ICL Phosphate Specialty TARGON® G3 is a secondary retarder which works in combination with citric or tartaric acid depending on the pH of the formulation. In formulations with an alkaline pH value, G3 works with tartaric acid. In formulations with a neutral pH, G3 works with cit...Vea Mas TARGON® G3 is a secondary retarder which works in combination with citric or tartaric acid depending on the pH of the formulation. In formulations with an alkaline pH value, G3 works with tartaric acid. In formulations with a neutral pH, G3 works with citric acid. TARGON® G3 helps to achieve constant setting, prolong working time, and improve the finish treating qualities. Vea Menos Request Sample
TCEP Flame Retardant Yangzhou Chenhua New Material CO., LTD. TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardan...Vea Mas TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardant properties as a nitrocellulose varnish additive due to its plasticization. Vea Menos
TCPP Flame Retardant Yangzhou Chenhua New Material CO., LTD. TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in c...Vea Mas TCPP Flame Retardant is a colorless to yellowish, oily liquid with a molecular weight of 327.56. This product has an aquatic solubility of 1.6g/l at 20 degrees Celsius and is insoluble in aliphatic hydrocarbons. This product acts as a flame retardant in coatings. Vea Menos
Tetrabromobisphenol A Bis-(2,3-Dibromopropyl Ether) Hainan Zhongxin Chemical Co., Ltd. Tetrabromobisphenol A bis-(2,3-dibromopropyl ether), Synonymous with BDDP:2,2-Bis[4-(2,3-Dibromopropoxy)-3,5-Dibromophenyl]Propane, is a white powder that has a minimum Br content of 67%. It is primarily used as a flame retardant in paints and plastics. T...Vea Mas Tetrabromobisphenol A bis-(2,3-dibromopropyl ether), Synonymous with BDDP:2,2-Bis[4-(2,3-Dibromopropoxy)-3,5-Dibromophenyl]Propane, is a white powder that has a minimum Br content of 67%. It is primarily used as a flame retardant in paints and plastics. Tetrabromobisphenol A bis-(2,3-dibromopropyl ether) can also be used as an additive in EPS, PS, SAN, PO and PP. Vea Menos
Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) Hainan Zhongxin Chemical Co., Ltd. Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) is a white powder that has a minimum of 64% Br. It is primarily used as a flame retardant additive in paints and plastic with it has better stability than BDDP. It is recommended for use in PP, PE, PS, A...Vea Mas Tetrabromobisphenol S BIS-(2,3-Dibromopropyl Ether) is a white powder that has a minimum of 64% Br. It is primarily used as a flame retardant additive in paints and plastic with it has better stability than BDDP. It is recommended for use in PP, PE, PS, ABS resin and rubber. Vea Menos
Tetrabromophthalic Anhydride (TBPA) Hainan Zhongxin Chemical Co., Ltd. Tetrabromophthalic Anhydride (TBPA) is a white or light yellow powder with a minimum of 67% BR. It is primarily used as a flame retardant additive and has a high bromine content. It is used in the production of elastomers, wire & cable, textile coatings,...Vea Mas Tetrabromophthalic Anhydride (TBPA) is a white or light yellow powder with a minimum of 67% BR. It is primarily used as a flame retardant additive and has a high bromine content. It is used in the production of elastomers, wire & cable, textile coatings, business machines and television cabinets and is particularly effective in polyolefins, styrenic, polyamide, HIPS and polyester resins. Vea Menos
Tetrachlorophthalic Anhydride (TCPA) Hainan Zhongxin Chemical Co., Ltd. Tetrachlorophthalic Anhydride (TCPA) is a white crystalline powder that is 99% pure. It is primarily used as a flame retardant additive. Tetrachlorophthalic Anhydride (TCPA) can also be used as a phthalocyanine for use in the production of green pigments ...Vea Mas Tetrachlorophthalic Anhydride (TCPA) is a white crystalline powder that is 99% pure. It is primarily used as a flame retardant additive. Tetrachlorophthalic Anhydride (TCPA) can also be used as a phthalocyanine for use in the production of green pigments and dye intermediates. Vea Menos
Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) Hainan Zhongxin Chemical Co., Ltd. Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is a clear straw colored liquid that is between 75-77% pure. It is primarily used as a flame retardant additive and can also be used as a fungicide. Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is rec...Vea Mas Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is a clear straw colored liquid that is between 75-77% pure. It is primarily used as a flame retardant additive and can also be used as a fungicide. Tetrakis(Hydroxymethyl)Phosphonium Sulfate (THPS) is recommended for use in cotton, leather, and polyester products. Vea Menos
Tri(2-Chloroisopropyl) Phosphate (TCPP) Hainan Zhongxin Chemical Co., Ltd. Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins a...Vea Mas Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins and is recommended for use in the production of PU foams, PVC and adhesives. Vea Menos