| Anti-blocking agent SR | Yantai Suny Chem International Co., Ltd. | Anti-blocking agent SR is a neutral white waxy solid, which is produced through short-range molecular distillation and purification. It can be miscible with paraffin, dissolved in ethanol, chloroform, ether but not in water. | |
| APL-308 | Tianyi Chemical Engineering Material Co., Ltd. | APL-308, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
| APL-309 | Tianyi Chemical Engineering Material Co., Ltd. | APL-309, in the form of a dry, white powder, is a zinc stearate additive that can be used in paints, sealer varnishes, and wood varnishes. This product is insoluble in water, ether and ethanol. It is soluble in benzene and acid. | |
| BYK®-394 | BYK | Agente acrílico de liberación, silicón-libre, con propiedades de nivelación. Solución de un copolímero de poliacrilato. | |
| BYK®-P 9051 | BYK | Es un aditivo de proceso para BMC con propiedades de desmoldeo. Se trata de una combinación de sustancias tensoactivas y polímeros. | |
| BYK-SILCLEAN 3701 | BYK | BYK-SILCLEAN 3701 is a silicone-containing surface additive for epoxy resin systems to improve cleanability (easy-to-clean effect). Permanent effect as a result of cross-linking in the system. | |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...Vea Mas Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. Vea Menos | Request Sample |
| Fluoro P-77 (FEP Powder) | Shamrock Technologies b.v.b.a. | Fluoro P-77 es un fluoretilenopropileno (FEP) con un tamaño de partícula promedio de 1 a 3 micrones. Se usa en aplicaciones como revestimientos para utensilios de cocina para propiedades de liberación, ofreciendo alto brillo y suavidad cuando se fusiona. | |
| Hydrocer 145 (Amide Wax Dispersion) | Shamrock Technologies b.v.b.a. | Una dispersión acuosa al 50% de una cera sintética. Utilizado en tejidos, papel, tinta y envases de metal. | |
| Michem® Emulsion 12235 | Michelman | Michem® Emulsion 12235 provides abrasion resistance in coatings and varnishes. It also improves release properties in metal stamping applications. | |
| Michem® Emulsion 27445 | Michelman | Michem® Emulsion 27445 provides excellent water repellency and wood protection when used in the paints and coatings industries. It is also an effective anti-block and release agent for coatings and adhesives. | |
| Michem® Emulsion 52137P | Michelman | Michem® Emulsion 52137P as an additive, provides lubricity and is effective as a high temperature mold release for metal dies. | |
| Michem® Emulsion 61335P | Michelman | Michem® Emulsion 61335P is an additive which provides excellent slip and mar resistance and anti-blocking properties. This product can be used as a release and slip aid in adhesives and coatings. | |
| Michem® Emulsion 76930 | Michelman | Michem® Emulsion 76930 is an anionic wax emulsion that provides water resistance and anti-block properties. It can also be classified as a high temperature and pressure release agent. | |
| Michem® Lube 124P | Michelman | Michem® Lube 124P as an additive provides release and act as a detackifier for synthetic and natural rubber. It is used successfully in latex glove formulation and also offers slip resistance for adhesives and sealants. | |
| Michem® Lube 182PFPHS | Michelman | Michem® Lube 182PFPHS can provide slip, release and antiblock properties in a number of applications, ranging from wood coatings to being blended with synthetic and natural lattices. This product is also a mar and scratch resistant and water repellent add...Vea Mas Michem® Lube 182PFPHS can provide slip, release and antiblock properties in a number of applications, ranging from wood coatings to being blended with synthetic and natural lattices. This product is also a mar and scratch resistant and water repellent additive in varnishes and other coatings. Vea Menos | |
| Michem® Lube 382 | Michelman | Michem® Lube 382 can provide slip, release and antiblock properties in a number of applications, ranging from wood coatings to being blended with synthetic and natural lattices. This product is also a mar and scratch resistant and water repellent additive...Vea Mas Michem® Lube 382 can provide slip, release and antiblock properties in a number of applications, ranging from wood coatings to being blended with synthetic and natural lattices. This product is also a mar and scratch resistant and water repellent additive in varnishes and other coatings. Vea Menos | |
| NEVOSIL® PRA 1500 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1500, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low mel...Vea Mas NEVOSIL® PRA 1500, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. Vea Menos | |
| NEVOSIL® PRA 1530 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1530, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melt...Vea Mas NEVOSIL® PRA 1530, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. Vea Menos | |
| NEVOSIL® PRA 1555 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1555, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melt...Vea Mas NEVOSIL® PRA 1555, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. Vea Menos | |
| NEVOSIL® PRA 1630 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1630, in the form of a white liquid, is a non-ionic, alkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. ...Vea Mas NEVOSIL® PRA 1630, in the form of a white liquid, is a non-ionic, alkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. Vea Menos | |
| NEVOSIL® PRA 1655 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1655, in the form of a white liquid, is a non-ionic, alkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. ...Vea Mas NEVOSIL® PRA 1655, in the form of a white liquid, is a non-ionic, alkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. Vea Menos | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...Vea Mas NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. Vea Menos | |
| OMBRELUB RA | Munzing Chemie | OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastif...Vea Mas OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. As OMBRELUB RA is nearly colourless it can be perfectly used in clear coats and white lacquers. Main applications include strippable coatings, transport protection coatings, hobby paints, and coatings for spray booths. Vea Menos | |
| Release FL7 | Ichemco | Release FL7 is a solvent-based release agent. This product has a total solids content of 29-31% and a Ford Cup viscosity of 20-24 seconds. Release FL7 is most commonly used as a release agent in paper and corona-treated printed PP and PE film coating ap...Vea Mas Release FL7 is a solvent-based release agent. This product has a total solids content of 29-31% and a Ford Cup viscosity of 20-24 seconds. Release FL7 is most commonly used as a release agent in paper and corona-treated printed PP and PE film coating applications. Vea Menos | |
| Release FR 100 | Ichemco | Release FR 100 is a vegetable oil, release agent, and polyamidic resin-based compound. This product has a total solids content of 98-100%. Release FR 100 is most commonly used in PS adhesive tape and film productions applications. | |
| Release FR 100 V | Ichemco | Release FR 100 V is a release agent. This product has a total solids content of 99-100%. Release FR 100 V is most commonly used in PE and aluminum tape production applications. | |
| Release FR 2 AB | Ichemco | Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape a...Vea Mas Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape and film production applications. Vea Menos | |
| Release FR 5 C | Ichemco | Release FR 5 C is an additive and release agent-based compound in a toluene solution. This product has a total solids content of 4-6%. Release FR 5 C is most commonly used as a release agent in PS adhesive tape and film production applications. | |
| Release HT 100 | Ichemco | Release HT 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 97-107°C. Release HT 100 is most commonly used as a release agent in corona and non corona-treated film coating...Vea Mas Release HT 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 97-107°C. Release HT 100 is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 D | Ichemco | Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating ...Vea Mas Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 D DIL. 1 ECO | Ichemco | Release K 100 D DIL. 1 ECO is a polyurethane release agent in an octane and isopropyl alcohol solvent solution. This product has a total solids content of 0.5-1.5%. Release K 100 D DIL. 1 ECO is most commonly used as a release agent in PP, PE, PVC, and po...Vea Mas Release K 100 D DIL. 1 ECO is a polyurethane release agent in an octane and isopropyl alcohol solvent solution. This product has a total solids content of 0.5-1.5%. Release K 100 D DIL. 1 ECO is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. Vea Menos | |
| Release K 100 D DIL.2 | Ichemco | Release K 100 D DIL.2 is a polyvinylcarbonate release agent in a toluene solvent solution. This product has a total solids content of 1.8-2.2%. Release K 100 D DIL.2 is most commonly used in adhesive tape production applications. | |
| Release K 100 DF | Ichemco | Release K 100 DF is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 80-90°C. Release K 100 DF is most commonly used as a release agent in acrylic adhesive, as well as corona and...Vea Mas Release K 100 DF is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 80-90°C. Release K 100 DF is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 DI | Ichemco | Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coatin...Vea Mas Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 DI DIL. 1 ECO | Ichemco | Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive...Vea Mas Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive tape production applications. Vea Menos | |
| Release K 100 DI DIL. 1.5 ECO | Ichemco | Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhe...Vea Mas Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhesive tape production applications. Vea Menos | |
| Release K 100 DM | Ichemco | Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as...Vea Mas Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 E | Ichemco | Release K 100 E is a release agent . This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 E is most commonly used as a release agent in PE and PP film coating applications. | |
| Release K 100 ES | Ichemco | Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating a...Vea Mas Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release K 100 H | Ichemco | Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating ap...Vea Mas Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release KB 100 | Ichemco | Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in corona and non corona-treated film coating ap...Vea Mas Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in corona and non corona-treated film coating applications. Vea Menos | |
| Release KB 100 A | Ichemco | Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in acrylic adhesive, as well as corona and non c...Vea Mas Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. Vea Menos | |
| Release LN 2 A | Ichemco | Release LN 2 A is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release LN 2 A is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. | |
| Release Master K20 E PP | Ichemco | Release Master K20 E PP is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release Master K20 E PP is most commonly used as a release agent in low-noise OPP adhesive tape printing applicati...Vea Mas Release Master K20 E PP is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release Master K20 E PP is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. Vea Menos | |
| Release PP 100 | Ichemco | Release PP 100 is a synthetic polymer. This product has a total solids content of 98-100% and a melting point of 83-93°C. Release PP 100 is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. | |
| Release PP 25 | Ichemco | Release PP 25 is a synthetic polymer in a solvent solution. This product has a total solids content of 22-24% and a melting range of 90-115°C. Release PP 25 is most commonly used as a release agent in adhesive tape printing applications. | |
| Release PP 25 DIL | Ichemco | Release PP 25 DIL is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.41-0.51%. Release PP 25 DIL is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.35 | Ichemco | Release PP 25 DIL. 0.35 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.3-0.4%. Release PP 25 DIL. 0.35 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.6 | Ichemco | Release PP 25 DIL. 0.6 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.55-0.65%. Release PP 25 DIL. 0.6 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.8 | Ichemco | Release PP 25 DIL. 0.8 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.75-0.85%. Release PP 25 DIL. 0.8 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL 1.5 | Ichemco | Release PP 25 DIL 1.5 is a polyurethane release agent in a solvent solution. This product has a total solids content of 1.4-1.6%. Release PP 25 DIL 1.5 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 2 | Ichemco | Release PP 25 DIL. 2 is a polyurethane release agent in a solvent solution. This product has a total solids content of 1.8-2.2%. Release PP 25 DIL. 2 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL 2.5 | Ichemco | Release PP 25 DIL 2.5 is a polyurethane release agent in a solvent solution. This product has a total solids content of 2.3-2.7%. Release PP 25 DIL 2.5 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 3 | Ichemco | Release PP 25 DIL. 3 is a polyurethane release agent in a solvent solution. This product has a total solids content of 2.8-3.2%. Release PP 25 DIL. 3 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release W 30 HS4 | Ichemco | Release W 30 HS4 is a water based release agent based on synthetic SBR polymers added with hydrophobic and releasing agents. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 30 HS4 is most ...Vea Mas Release W 30 HS4 is a water based release agent based on synthetic SBR polymers added with hydrophobic and releasing agents. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 30 HS4 is most commonly used as a release agent in porous substrate coating applications. Vea Menos | |
| Release W 40 G2 | Ichemco | Release W 40 G2 is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 150-450 mPa.s. Release W 40 G2 is most commonly used as a release agent in hot-melt and solventborne adhesive applicati...Vea Mas Release W 40 G2 is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 150-450 mPa.s. Release W 40 G2 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. Vea Menos | |
| Release W 40 GB4 LV | Ichemco | Release W 40 GB4 LV is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 30-100 mPa.s. Release W 40 GB4 LV is most commonly used as a release agent in hot-melt adhesive and porous substrat...Vea Mas Release W 40 GB4 LV is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 30-100 mPa.s. Release W 40 GB4 LV is most commonly used as a release agent in hot-melt adhesive and porous substrate coating applications. Vea Menos | |
| Release W 40 GP1 | Ichemco | Release W 40 GP1 is a water-based product based on acrylic dispersions. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Release W 40 GP1 is most commonly used as a printable release coat in paper ap...Vea Mas Release W 40 GP1 is a water-based product based on acrylic dispersions. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Release W 40 GP1 is most commonly used as a printable release coat in paper applications. Vea Menos | |
| Release W 40 HA 5 | Ichemco | Release W 40 HA 5 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 5 is most common...Vea Mas Release W 40 HA 5 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 5 is most commonly used as a release agent in porous substrate coating applications. Vea Menos | |
| Release W 40 HA 6 | Ichemco | Release W 40 HA 6 is a water-based release agent based on synthetic acrylic polymers. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 6 is most commonly used as a release agent in poro...Vea Mas Release W 40 HA 6 is a water-based release agent based on synthetic acrylic polymers. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 6 is most commonly used as a release agent in porous substrate coating applications. Vea Menos | |
| Release W 40 HA 8 | Ichemco | Release W 40 HA 8 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 600-1200 mPa.s. Release W 40 HA 8 is most commo...Vea Mas Release W 40 HA 8 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 600-1200 mPa.s. Release W 40 HA 8 is most commonly used as a release agent in porous substrate coating applications. Vea Menos | |
| Release W 40 HS 4 | Ichemco | Release W 40 HS 4 is a water-based release agent based on synthetic SBR polymers with a high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 40 HS 4 is most commonly used ...Vea Mas Release W 40 HS 4 is a water-based release agent based on synthetic SBR polymers with a high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 40 HS 4 is most commonly used as a release agent in porous substrate coating applications. Vea Menos | |
| Release W 40 S | Ichemco | Release W 40 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Release W 40 S is most commonly used as a release agent in porous subst...Vea Mas Release W 40 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Release W 40 S is most commonly used as a release agent in porous substrate coating applications. Vea Menos | |
| Release W 45 GB 1 | Ichemco | Release W 45 GB 1 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Release W 45 GB 1 is most commonly used as a release agent in p...Vea Mas Release W 45 GB 1 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Release W 45 GB 1 is most commonly used as a release agent in porous substrate coating applications. Vea Menos | |
| Release W 45 GB 15 | Ichemco | Release W 45 GB 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GB 15 is most commonly used as a release agent in hot-me...Vea Mas Release W 45 GB 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GB 15 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. Vea Menos | |
| Release W 45 GB 5 | Ichemco | Release W 45 GB 5 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 45 GB 5 is most commonly used as a controlled release agent in ho...Vea Mas Release W 45 GB 5 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 45 GB 5 is most commonly used as a controlled release agent in hot-melt adhesive applications. Vea Menos | |
| Release W 45 GS 15 | Ichemco | Release W 45 GS 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GS 15 is most commonly used as a release agent in hot-me...Vea Mas Release W 45 GS 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GS 15 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. Vea Menos | |
| Release W 45 HS 4 | Ichemco | Release W 45 HS 4 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 45 HS 4 is most commonly used as a release agent in porous substr...Vea Mas Release W 45 HS 4 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 45 HS 4 is most commonly used as a release agent in porous substrate coating applications. Vea Menos | |
| Release W20 G BV | Ichemco | Release W20 G BV is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 10-30 mPa.s. Release W20 G BV is most commonly used as a release agent in porous substrate c...Vea Mas Release W20 G BV is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 10-30 mPa.s. Release W20 G BV is most commonly used as a release agent in porous substrate coating applications. Vea Menos | |
| Release W20 GB1 | Ichemco | Release W20 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 800-1300 mPa.s. Release W20 GB1 is most commonly used as a release coat in substrate coating ...Vea Mas Release W20 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 800-1300 mPa.s. Release W20 GB1 is most commonly used as a release coat in substrate coating applications. Vea Menos | |
| Release W20 GP | Ichemco | Release W20 GP is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1200-1600 mPa.s. Release W20 GP is most commonly used as a printable and writable release coat...Vea Mas Release W20 GP is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1200-1600 mPa.s. Release W20 GP is most commonly used as a printable and writable release coat in paper applications. Vea Menos | |
| Release W20 GP1 | Ichemco | Release W20 GP1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Release W20 GP1 is most commonly used as a printable and writable release co...Vea Mas Release W20 GP1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Release W20 GP1 is most commonly used as a printable and writable release coat in paper applications. Vea Menos | |
| Release W20 HS4 | Ichemco | Release W20 HS4 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 900-1200 mPa.s. Release W20 HS4 is most commonly used as a release agent in porous subs...Vea Mas Release W20 HS4 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 900-1200 mPa.s. Release W20 HS4 is most commonly used as a release agent in porous substrate applications. Vea Menos | |
| Release W20 S | Ichemco | Release W20 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W20 S is most commonly used as a release agent in porous substrat...Vea Mas Release W20 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W20 S is most commonly used as a release agent in porous substrate applications. Vea Menos | |
| Release W22 WP | Ichemco | Release W22 WP is a non-silicone release agent. This product has a total solids content of 21.5-23.5% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W22 WP is most commonly used as a release agent in written and ink-jet printed paper coatin...Vea Mas Release W22 WP is a non-silicone release agent. This product has a total solids content of 21.5-23.5% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W22 WP is most commonly used as a release agent in written and ink-jet printed paper coating applications. Vea Menos | |
| Release W40 GB1 | Ichemco | Release W40 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB1 is most commonly used as a release agent in hot-melt and so...Vea Mas Release W40 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB1 is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. Vea Menos | |
| Release W40 GB1 LV | Ichemco | Release W40 GB1 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB1 LV is most commonly used as a release agent in hot-melt and s...Vea Mas Release W40 GB1 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB1 LV is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. Vea Menos | |
| Release W40 GB2 | Ichemco | Release W40 GB2 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH level of 8-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release Release W40 GB2 is most commonly used as a releas...Vea Mas Release W40 GB2 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH level of 8-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release Release W40 GB2 is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. Vea Menos | |
| Release W40 GB3 | Ichemco | Release W40 GB3 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 7-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB3 is most commonly used as a release agent in sub...Vea Mas Release W40 GB3 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 7-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB3 is most commonly used as a release agent in substrate coatings where contact with hot-melt and solvent-based adhesives is common. Vea Menos | |
| Release W40 GB6 LV | Ichemco | Release W40 GB6 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 8-9, and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB6 LV is most commonly used as a release agent in ...Vea Mas Release W40 GB6 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 8-9, and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB6 LV is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. Vea Menos | |
| Release WF 30 | Ichemco | Release WF 30 is a water-based release agent based on acrylic polymers. This product has a total solids content of 29-31%, a pH of 3-5, and a Brookfield viscosity at 25°C of 20-70 mPa.s. Release WF 30 is most commonly used as a release agent in technical ...Vea Mas Release WF 30 is a water-based release agent based on acrylic polymers. This product has a total solids content of 29-31%, a pH of 3-5, and a Brookfield viscosity at 25°C of 20-70 mPa.s. Release WF 30 is most commonly used as a release agent in technical tape applications. Vea Menos | |
| S-400-N1 (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | Un polvo de cera amida para aplicaciones de capas delgada. Se puede utilizar para reducir el coeficiente de fricción y mejorar la liberación de la superficie con un efecto mínimo sobre el brillo. Se utiliza en recubrimientos de latas, bobinas, maderas, pa...Vea Mas Un polvo de cera amida para aplicaciones de capas delgada. Se puede utilizar para reducir el coeficiente de fricción y mejorar la liberación de la superficie con un efecto mínimo sobre el brillo. Se utiliza en recubrimientos de latas, bobinas, maderas, papel e industriales. Vea Menos | |
| S-400-N5 (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | Un polvo de cera amida para aplicaciones de capas delgada. Se puede utilizar para reducir el coeficiente de fricción y mejorar la liberación de la superficie con un efecto mínimo sobre el brillo. Se utiliza en recubrimientos de latas, bobinas, maderas, pa...Vea Mas Un polvo de cera amida para aplicaciones de capas delgada. Se puede utilizar para reducir el coeficiente de fricción y mejorar la liberación de la superficie con un efecto mínimo sobre el brillo. Se utiliza en recubrimientos de latas, bobinas, maderas, papel e industriales. Vea Menos | |
| S-400-SP5 (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | Un polvo de cera amida para aplicaciones de capas delgada. Se puede utilizar para reducir el coeficiente de fricción y mejorar la liberación de la superficie con un efecto mínimo sobre el brillo. Se utiliza en recubrimientos de latas, bobinas, maderas, pa...Vea Mas Un polvo de cera amida para aplicaciones de capas delgada. Se puede utilizar para reducir el coeficiente de fricción y mejorar la liberación de la superficie con un efecto mínimo sobre el brillo. Se utiliza en recubrimientos de latas, bobinas, maderas, papel e industriales. Vea Menos | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...Vea Mas SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. Vea Menos | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...Vea Mas SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. Vea Menos | |
| TEGO® Cure 100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Cure 100 is a reactive ambient curing polysiloxane resin, pre-catalysed with amines, for the use as hardener. | Request Sample |
| TEGO® Rad 2650 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2650 es un aditivo de liberación altamente efectivo para formulaciones de curado por radiación. Es un acrilato de silicona líquido, transparente a ligeramente turbio, radicalmente reticulable. TEGO® Rad 2650 puede utilizarse para tintas de curad...Vea Mas TEGO® Rad 2650 es un aditivo de liberación altamente efectivo para formulaciones de curado por radiación. Es un acrilato de silicona líquido, transparente a ligeramente turbio, radicalmente reticulable. TEGO® Rad 2650 puede utilizarse para tintas de curado por radiación de impresión y barnices de sobreimpresión, tintas de serigrafía y tintas de impresión offset (litográficas). Mejora la resistencia al rayado y a los marcadores con un deslizamiento adicional y la extracción de aire. El agregado de este producto al revestimiento puede realizarse como se suministra o prediluido. La predilución con solventes adecuados simplifica la dosificación y la incorporación de TEGO® Rad 2650. Vea Menos | Request Sample |
| TEGO® Rad 2700 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2700 es un aditivo de liberación y deslizamiento radicalmente reticulable de máxima eficacia. Es un acrilato de silicona líquida turbio con un muy alto grado de efecto de deslizamiento y liberación. La separación de fases puede producirse durant...Vea Mas TEGO® Rad 2700 es un aditivo de liberación y deslizamiento radicalmente reticulable de máxima eficacia. Es un acrilato de silicona líquida turbio con un muy alto grado de efecto de deslizamiento y liberación. La separación de fases puede producirse durante el almacenamiento del producto aunque puede remezclarse mediante agitación. Las propiedades de aplicación del producto no se ven afectadas por la separación. El agregado de este producto al revestimiento puede realizarse como se suministra o prediluido. La predilución con solventes adecuados simplifica la dosificación y la incorporación de TEGO ® Rad 2700. Vea Menos | Request Sample |
| TEGO® Rad 2800 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has ...Vea Mas TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has a pronounced silicone character, combining strong hydrophobing properties with optimum system compatibility. Vea Menos | Request Sample |
