| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...Vea Mas 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). Vea Menos | |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...Vea Mas Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. Vea Menos | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...Vea Mas Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. Vea Menos | |
| BYD2600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, an...Vea Mas BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. Vea Menos | |
| BYD3102 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3102, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in non-woven fabric adhesives. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| CN104A75 | Sartomer Americas | CN104A75 es un acrilato epoxi a base de bisfenol A difuncional mezclado con 25% de tripropilenglicol diacrilato SR306. Proporciona buen equilibrio de las propiedades de agua y alta reactividad. El oligómero base, CN104, ofrece el color más bajo de acrilat...Vea Mas CN104A75 es un acrilato epoxi a base de bisfenol A difuncional mezclado con 25% de tripropilenglicol diacrilato SR306. Proporciona buen equilibrio de las propiedades de agua y alta reactividad. El oligómero base, CN104, ofrece el color más bajo de acrilatos epoxi a base de bisfenol A Sartomers. Las aplicaciones sugeridas incluyen adhesivos, revestimientos, componentes electrónicos y tintas. Vea Menos | |
| CN120Z | Sartomer Americas | CN120Z es un acrilato epoxi a base de bisfenol A difuncional. buen equilibrio de las propiedades de agua y alta reactividad. CN120Z ofrece la menor viscosidad de los acrilatos epoxi a base de bisfenol A Sartomers. Las aplicaciones sugeridas incluyen adhes...Vea Mas CN120Z es un acrilato epoxi a base de bisfenol A difuncional. buen equilibrio de las propiedades de agua y alta reactividad. CN120Z ofrece la menor viscosidad de los acrilatos epoxi a base de bisfenol A Sartomers. Las aplicaciones sugeridas incluyen adhesivos, revestimientos, componentes electrónicos y tintas. Las aplicaciones sugeridas incluyen adhesivos estructurales, sensibles a la presión, anaeróbicos y aglutinantes. También se recomienda para revestimientos de piso, papel y plástico, componentes electrónicos y tintas flexográficas, de gravado y offset. Vea Menos | |
| CN293 | Sartomer Americas | CN293 es un oligómero de poliéster acrilado hexafuncional que presenta buena humectación de pigmentos y rápida respuesta de curado. CN293 se recomienda para usar en formulaciones de tintas litográficas y flexográficas y en revestimientos resistentes a la ...Vea Mas CN293 es un oligómero de poliéster acrilado hexafuncional que presenta buena humectación de pigmentos y rápida respuesta de curado. CN293 se recomienda para usar en formulaciones de tintas litográficas y flexográficas y en revestimientos resistentes a la abrasión. Vea Menos | |
| CN307 | Sartomer Americas | CN307 es un éster de acrilato hidrófobo. CN307 presenta excelente flexibilidad, resistencia al agua y resistencia química. Se utiliza en revestimientos, componentes electrónicos y fotopolímeros curados con UB/EB. CN307 se basa en polibutadieno con alto co...Vea Mas CN307 es un éster de acrilato hidrófobo. CN307 presenta excelente flexibilidad, resistencia al agua y resistencia química. Se utiliza en revestimientos, componentes electrónicos y fotopolímeros curados con UB/EB. CN307 se basa en polibutadieno con alto contenido de vinilo y puede incorporarse en sistemas de caucho natural y sintético curados con peróxido, donde mejora las propiedades mecánicas y de rendimiento. Vea Menos | |
| CN9302 | Sartomer Americas | CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture c...Vea Mas CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture cure of shadowed areas for enhanced coating performance. Vea Menos | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...Vea Mas DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Vea Menos | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...Vea Mas DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Vea Menos | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...Vea Mas DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Vea Menos | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...Vea Mas DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. Vea Menos | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...Vea Mas DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. Vea Menos | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...Vea Mas DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. Vea Menos | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...Vea Mas DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). Vea Menos | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...Vea Mas DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Vea Menos | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...Vea Mas DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Vea Menos | Request Sample |
| Dispersion Acrilica A-5000 F1 E | Opalion | Dispersion Acrilica A-5000 F1 E Se trata de un copolímero acrílico en dispersión acuosa desarrollado para elaborar adhesivos ecológicos de contacto. La velocidad de secado del A-5000 F1 E es tan rápida que puede compararse con sistemas al solvente. Una ve...Vea Mas Dispersion Acrilica A-5000 F1 E Se trata de un copolímero acrílico en dispersión acuosa desarrollado para elaborar adhesivos ecológicos de contacto. La velocidad de secado del A-5000 F1 E es tan rápida que puede compararse con sistemas al solvente. Una vez seco, la película presenta una resistencia al agua notable. Vea Menos | |
| Dispersion EA – 595 F1 | Opalion | Dispersión de un copolímero acrílico estirénico que presenta una película flexible sin desmejorar los valores de resistencias que se exigen para la preparación de pinturas de alta calidad. | |
| Dispersion EA-890 | Opalion | La EA-890 es una dispersión de un copolímero acrílico estirénico desarrollado como vehículo para tintas. Se distingue por su dureza y alto brillo. | |
| EA-514 RF | Opalion | Es una dispersión autorreticulable de copolímeros de esteres acrílicas. Tiene autorreticulación bimodal, es decir, una reticulación a temperatura ambiente y otra a 100-150o.C. Además es reactiva a altas temperaturas con resinas melamínicas. La reticulació...Vea Mas Es una dispersión autorreticulable de copolímeros de esteres acrílicas. Tiene autorreticulación bimodal, es decir, una reticulación a temperatura ambiente y otra a 100-150o.C. Además es reactiva a altas temperaturas con resinas melamínicas. La reticulación a temperatura ambiente tiene lugar una vez evaporado el agua y se completa entre 3 y 7 días dependiendo de las condiciones de humedad y temperatura. La solidez alcanzada es suficiente para los requerimientos de estampado secado al aire sin horno. Allí se usa un 15% de dispersión mezclada con extendedores y pigmentos. En el resinado de telas se puede alcanzar el nivel de la segunda autorreticulación por calentamiento 5 minutos a 140o.C y con un 3% de resina melamínica se realiza una tercera reacción de entrecruzamiento. La diferencia fundamental con otras dispersiones es su mano suave inclusive completadas las tres reticulaciones posibles, siendo la resitencia al lavado excelente y cierta resistencia al solvente. Vea Menos | |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...Vea Mas HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. Vea Menos | Request Sample |
| Kingcure 800-S | Sanho Chemical Co., Ltd. | Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fa...Vea Mas Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fast-setting adhesive formulation applications. Vea Menos | |
| L 95 E | Opalion | Dispersión acrílica estirénica cuya película es de mano suave. USOS : Estampaciones textiles secado al aire. | |
| Licocene® PP 1302 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 1302 granules is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity. | |
| Licocene® PP 1502 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 1502 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. | |
| Licocene® PP 1602 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 1602 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. | |
| Licocene® PP 2602 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 2602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer. | |
| Licocene® PP 3602 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 3602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer. | |
| Opalion 2010 | Opalion | Se trata de una dispersión de muy alta reticulación de copolímeros de ésteres acrílicos y vinílicos. Se utiliza como ligante de estampado y para resinado de telas, otorgando una mano suave y excelente resistencia al lavado. | |
| Picassian® AC-213 | Stahl Polymers | Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...Vea Mas Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. Vea Menos | |
| PRO13944 | Sartomer Americas | PRO13944 is a high molecular weight, difunctional polyether urethane-acrylate. On cure, it can undergo a phase separation process to improve toughness of some formulations. | |
| PVP/VA28W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and vis...Vea Mas PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. Vea Menos | |
| PVP/VA37E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and vis...Vea Mas PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. Vea Menos | |
| PVP/VA55E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is...Vea Mas PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. Vea Menos | |
| PVP/VA55W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and vis...Vea Mas PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. Vea Menos | |
| PVP/VA73E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and vis...Vea Mas PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. Vea Menos | |
| PVP/VA73W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and vis...Vea Mas PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. Vea Menos | |
| PVP/VA84E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is...Vea Mas PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. Vea Menos | |
| PVP/VA84S | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing ...Vea Mas PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. Vea Menos | |
| PVP/VA84W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and vis...Vea Mas PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. Vea Menos | |
| R-2560 | NuSil Silicone Technology 1 | R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°...Vea Mas R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°F to 500°F). This product can be used for thermal insulating as a firewall sealant, or as an ablative coating in missiles, rockets, aircraft and launch equipment. Vea Menos | |
| SYNTHEBOND™ 1090 | Synthomer | SYNTHEBOND™ 1090 is a styrene acrylic emulsion designed for use as laminating adhesive or in heat seal applications. | |
| SYNTHEBOND™ E 4010 | Synthomer | SYNTHEBOND™ E 4010 is a styrene acrylic copolymer of use in a variety of adhesive applications. | |
| Texicryl® 13-023 | Scott Bader | Texicryl® 13-023 is a high performance water resistant binder used in the making of ceramic tile adhesives. Because of its special emulsifier system, it can be used with various fillers like silicas and calcium carbonate. Texicryl® 13-023 can be considere...Vea Mas Texicryl® 13-023 is a high performance water resistant binder used in the making of ceramic tile adhesives. Because of its special emulsifier system, it can be used with various fillers like silicas and calcium carbonate. Texicryl® 13-023 can be considered for use in mastic formulations, glass fiber bonding tapes and adhesives for expanded polystyrene tiles. It displays good water handling capabilities and offers adhesive bonds high strength. Vea Menos | |
| Texicryl® 13-031 | Scott Bader | Texicryl® 13-031 is a styrene acrylic copolymer emulsion that is made for use in textured and wall coatings, utility grade ceramic tile adhesives and other applications where high pigment loading and shear stability are needed. | |
| Texicryl® 13-061 | Scott Bader | Texicryl® 13-061 is a styrene acrylic copolymer emulsion that has been created specifically for the production of flexible water-resistant ceramic tile adhesives. It is also ideal for use in exterior wall and elastomeric roof coatings as well as floor til...Vea Mas Texicryl® 13-061 is a styrene acrylic copolymer emulsion that has been created specifically for the production of flexible water-resistant ceramic tile adhesives. It is also ideal for use in exterior wall and elastomeric roof coatings as well as floor tile adhesives. Silane structures that are on the polymer backbone show good adhesive strength to difficult substrates like green concrete. Vea Menos | |
| Texicryl® 13-065 | Scott Bader | Texicryl® 13-065 is a styrene acrylic copolymer emulsion that has been created especially as a binder for high performance ceramic tile adhesives along with fix and grouts. It is also Alkyl Phenol Ethoxylate-free. | |
| Texicryl® 13-066 | Scott Bader | Texicryl® 13-066 is a styrene acrylic copolymer emulsion created especially for the making of flexible, water-resistant ceramic tile adhesives. It is particularly suited for floor tile adhesives and is free of Alkyl Phenol Ethoxylate. | |
| Texicryl® 13-070 | Scott Bader | Texicryl® 13-070 is a styrene-acrylic copolymer emulsion that has been created primarily with a variety of filler types into D1 tile adhesives. | |
| Texicryl® 13-073 | Scott Bader | Texicryl® 13-073 is a styrene acrylic copolymer emulsion that can be compounded into adhesives with a high degree of flexibility, allowing it to be used in the production of water-resistant ceramic tile adhesives. It is especially ideal for floor tile adh...Vea Mas Texicryl® 13-073 is a styrene acrylic copolymer emulsion that can be compounded into adhesives with a high degree of flexibility, allowing it to be used in the production of water-resistant ceramic tile adhesives. It is especially ideal for floor tile adhesives and is Alkyl Phenol Ethoxylate-free. Vea Menos | |
| Texicryl® 13-076 | Scott Bader | Texicryl® 13-076 is an all-acrylic copolymer that has good water resistance properties and is ideal for use in a variety of coating and binding applications. It is recommended for use in exterior coatings and can also be used as a polymeric additive in ce...Vea Mas Texicryl® 13-076 is an all-acrylic copolymer that has good water resistance properties and is ideal for use in a variety of coating and binding applications. It is recommended for use in exterior coatings and can also be used as a polymeric additive in cementitious admixtures to improve the physical properties of the system. Vea Menos | |
| Texicryl® 13-190 | Scott Bader | Texicryl® 13-190 is a styrene acrylic copolymer emulsion that is designed to withstand high filler pigment loadings. It is especially suited as a binder for waterborne adhesives that need high flexibility and adhesion. The polyer can be blended with harde...Vea Mas Texicryl® 13-190 is a styrene acrylic copolymer emulsion that is designed to withstand high filler pigment loadings. It is especially suited as a binder for waterborne adhesives that need high flexibility and adhesion. The polyer can be blended with harder polymers to obtain better flexibility and adhesion. Texicryl® 13-190 is ideal for a variety of water-based adhesives and emulsion paint formulations. It can be formulated into coatings ranging from semi-gloss finishes to high pigment volume concentrations with low costs. Vea Menos | |
| Texicryl® 13-220 | Scott Bader | Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printi...Vea Mas Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printing on flat screen and rotary systems. Texicryl® 13-220 also offers good adhesion on most substrates, with flexibility also ideal at low temperatures. Texicryl® 13-220 is suitable for the making of non-woven and flocking adhesives whether by pulverization, foaming or full bath methods. Vea Menos | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer emulsion that has good water resistance properties and is designed for use in cold seal adhesive applications. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a high performance styrene acrylic copolymer emulsion that has high pigment binding properties making it ideal for use in cold seal adhesive applications. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a high performance styrene acrylic copolymer emulsion that is created for use in cold seal adhesive applications. | |
| Texicryl® 13-602 | Scott Bader | Texicryl® 13-602 is a styrene acrylic copolymer emulsion that is part of the Texicryl® specialty polymer range of applications, designed for use in decorators caulks, flexible fillers and sealant applications. | |
| Texicryl® 17-0330 | Scott Bader | Texicryl® 17-0330 is a styrene acrylic copolymer emulsion that can be used in a variety of water-based adhesives and emulsion paint formulations. It can be incorporated into coatings with properties ranging from semi-gloss finishes to high pigment volume ...Vea Mas Texicryl® 17-0330 is a styrene acrylic copolymer emulsion that can be used in a variety of water-based adhesives and emulsion paint formulations. It can be incorporated into coatings with properties ranging from semi-gloss finishes to high pigment volume concentration of low cost paints. Texicryl® 17-0330 is especially suited as a binder for waterborne adhesives that need adhesion and flexibility. The product is also designed for use in inks. Vea Menos | |
| Texicryl® AD8077 | Scott Bader | Texicryl® AD8077 is a styrene acrylic copolymer emulsion made to be formulated with a variety of filler types into water-resistant tile adhesives and grouts. Ceramic tiles that are based on the product provide good trowelability, wet bond strength, water ...Vea Mas Texicryl® AD8077 is a styrene acrylic copolymer emulsion made to be formulated with a variety of filler types into water-resistant tile adhesives and grouts. Ceramic tiles that are based on the product provide good trowelability, wet bond strength, water and slip resistance and white color. Vea Menos | |
| Texicryl® AD8091 | Scott Bader | Texicryl® AD8091 is a styrene acrylic copolymer emulsion designed for use in high performance applications where good cold temperature and overall flexibility are desired. This product is ideal for use in a variety of applications, including water-based a...Vea Mas Texicryl® AD8091 is a styrene acrylic copolymer emulsion designed for use in high performance applications where good cold temperature and overall flexibility are desired. This product is ideal for use in a variety of applications, including water-based adhesives, emulsion paints, semi-gloss finish coatings, and high pigment concentration inks. Vea Menos |
