| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| NANOBYK®-3620 | BYK | NANOBYK®-3620 es una dispersión acuosa libre de VOC formada por partículas nanohíbridas, para proteger capas superiores brillosas, acuosas, pigmentadas y no pigmentadas del rayado y la abrasión. Esta propiedad protectora surte efecto rápidamente solamente...Vea Mas NANOBYK®-3620 es una dispersión acuosa libre de VOC formada por partículas nanohíbridas, para proteger capas superiores brillosas, acuosas, pigmentadas y no pigmentadas del rayado y la abrasión. Esta propiedad protectora surte efecto rápidamente solamente luego de un período de secado. NANOBYK®-3620 no tiene influencias negativas en el brillo y la transparencia, y por lo tanto, es especialmente apropiada para capas transparentes. Vea Menos | |
| NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
| NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
| NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...Vea Mas Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. Vea Menos | |
| NpAg_925 | TNS Solutions Ltda | NpAg_925 is a one-component antimicrobial product that, like the entire TNS product line, is customized to the customer's demand and production process. It is an aqueous colloidal dispersion of silver nanoparticles stabilized with organic molecules that g...Vea Mas NpAg_925 is a one-component antimicrobial product that, like the entire TNS product line, is customized to the customer's demand and production process. It is an aqueous colloidal dispersion of silver nanoparticles stabilized with organic molecules that guarantee a safe and efficient application, inhibiting the growth of microorganisms. Vea Menos | |
| NpAg_925-AgZn | TNS Solutions Ltda | NpAg_925-AgZn is an inorganic compound with antibacterial and antifungal function which, like the whole range of TNS products, is customized according to the customer's demand and production process. The product is developed with zinc compounds and silver...Vea Mas NpAg_925-AgZn is an inorganic compound with antibacterial and antifungal function which, like the whole range of TNS products, is customized according to the customer's demand and production process. The product is developed with zinc compounds and silver nanoparticles and is resistant to high temperature variations. The additive was intended for the purpose of inhibiting the growth and proliferation of pathogenic microorganisms in the products in which it is applied. Vea Menos | |
| NpAg_925-ETG | TNS Solutions Ltda | NpAg_925-ETG is a colloidal suspension of silver nanoparticles in alcohol, which gives the applied product antimicrobial characteristic. Like the entire TNS line, it is customized according to customer demand and production process. This additive ensures ...Vea Mas NpAg_925-ETG is a colloidal suspension of silver nanoparticles in alcohol, which gives the applied product antimicrobial characteristic. Like the entire TNS line, it is customized according to customer demand and production process. This additive ensures a safe and efficient application for the elimination of microorganisms from the use of nanotechnology. Vea Menos | |
| NUOSPERSE® 15 | Elementis | NUOSPERSE® 15 es un aditivo/vehículo multifuncional dispersante de pigmentos que fue desarrollado para revestimientos a base de solvente de alto rendimiento. | |
| NUOSPERSE® 2000 | Elementis | NUOSPERSE® 2000 es un humectante/transportador líquido para utilizar en colorantes y dispersiones de pigmentos que cumplen con las normas COV. | |
| NUOSPERSE® 2006 | Elementis | NUOSPERSE® 2006 es un componente activo de superficie, libre de solventes orgánicos que puede utilizarse como agente humectante en sistemas acuosos o a base de solventes orgánicos. Posee excelentes propiedades de humectación de sustratos. | |
| NUOSPERSE® 2008 | Elementis | NUOSPERSE® 2008 es un singular agente dispersante de pigmentos libre de solvente y sin COV especialmente utilizado en pigmentos concentrados y pinturas sin COV. El producto es un sufractante polimérico líquido multifuncional y se puede utilizar en tintas ...Vea Mas NUOSPERSE® 2008 es un singular agente dispersante de pigmentos libre de solvente y sin COV especialmente utilizado en pigmentos concentrados y pinturas sin COV. El producto es un sufractante polimérico líquido multifuncional y se puede utilizar en tintas y revestimientos acuosos y a base de solventes orgánicos. Vea Menos | |
| NUOSPERSE® 657 NA | Elementis | NUOSPERSE® 657 NA es muy eficaz en diversos tipos de pigmentos orgánicos e inorgánicos. Se recomienda su uso en una amplia gama de revestimientos a base de solvente de alto rendimiento. Este producto también puede aplicarse sobre vinilo. | |
| NUOSPERSE® 9100 | Elementis | NUOSPERSE® 9100 es un agente dispersante en polvo diseñado para sistemas con alto contenido de sólidos y UV. Es soluble en una amplia variedad de solventes, monómeros, diluyentes reactivos y es compatible con la mayoría de los sistemas no acuosos. Se pued...Vea Mas NUOSPERSE® 9100 es un agente dispersante en polvo diseñado para sistemas con alto contenido de sólidos y UV. Es soluble en una amplia variedad de solventes, monómeros, diluyentes reactivos y es compatible con la mayoría de los sistemas no acuosos. Se puede emplear como resina dispersante única para preparar dispersiones muy concentradas de pigmentos orgánicos e inorgánicos. Vea Menos | |
| NUOSPERSE® FA 115 | Elementis | NUOSPERSE® FA 115 es un aditivo para mejorar la incorporación de pastas de tintura universales en las pinturas de dispersión base. | |
| NUOSPERSE® FA 182 | Elementis | NUOSPERSE® FA 182 es un compuesto aniónico activo de superficie que se puede utilizar como agente humectante en pinturas de dispersión. El producto también reduce la resistencia de las pinturas electrostáticas en aerosol. | |
| NUOSPERSE® FA 196 | Elementis | NUOSPERSE® FA 196 es un agente dispersante de pigmentos, líquido, altamente concentrado para aplicaciones en sistemas a base de solventes orgánicos. NUOSPERSE® FA 196 se recomienda como agente de dispersión, especialmente en aplicaciones para negro carbón...Vea Mas NUOSPERSE® FA 196 es un agente dispersante de pigmentos, líquido, altamente concentrado para aplicaciones en sistemas a base de solventes orgánicos. NUOSPERSE® FA 196 se recomienda como agente de dispersión, especialmente en aplicaciones para negro carbón, en sistemas termoplásticos acrílicos y como producto auxiliar para mejorar la acción de las pastas de tintura universales en pinturas alquídicas básicas. Vea Menos | |
| NUOSPERSE® FK 329 | Elementis | NUOSPERSE® FK 329 es un inhibidor líquido de la corrosión para sistemas no acuosos. Este producto se recomienda como dispersante catiónico de pigmentos. | |
| NUOSPERSE FN® 1566 | Elementis | NUOSPERSE FN® 1566 es un surfactante de nonilfenol etoxilato. En general, estos compuestos de etoxilato son resistentes a los ácidos y los alcalinos, como así también a los agentes de reducción y oxidación débil. También son completamente compatibles con ...Vea Mas NUOSPERSE FN® 1566 es un surfactante de nonilfenol etoxilato. En general, estos compuestos de etoxilato son resistentes a los ácidos y los alcalinos, como así también a los agentes de reducción y oxidación débil. También son completamente compatibles con compuestos aniónicos y catiónicos. Vea Menos | |
| NUOSPERSE® FN 211 | Elementis | NUOSPERSE® FN 211 es un agente humectante y dispersante noniónico utilizado principalmente para formulaciones de revestimientos acuosos. Este producto no contiene alquídicos ni fenol etoxilatos y reemplaza los sufractantes noniónicos tradicionales. | |
| NUOSPERSE® FN 260 | Elementis | NUOSPERSE® FN 260 es un agente humectante emulsionante noniónico sin etiqueta. | |
| NUOSPERSE® FN 265 | Elementis | NUOSPERSE® FN 265 es un agente humectante y emulsionante noniónico sin alquilfenol. | |
| NUOSPERSE® FX 365 | Elementis | NUOSPERSE® FX 365 es un agente polimérico noniónico humectante y dispersante para utilizar en revestimientos acuosos y formulaciones de tintas y pastas de pigmentos. Este producto demuestra óptimas propiedades humectantes y estabilizantes. | |
| NUOSPERSE® FX 504 | Elementis | NUOSPERSE® FX 504 es un agente polimérico dispersante de pigmentos de baja espuma que funciona efectivamente en diversos pigmentos hidrófilos y extensores que se utilizan en revestimientos acuosos. | |
| NUOSPERSE® FX 600 | Elementis | NUOSPERSE® FX 600 es un agente disperante de pigmentos altamente eficaz para uso en revestimientos industriales acuosos, revestimientos protectores, pinturas de dispersión de brillo, colorantes y tintas de impresión. Este producto es un polímero multifunc...Vea Mas NUOSPERSE® FX 600 es un agente disperante de pigmentos altamente eficaz para uso en revestimientos industriales acuosos, revestimientos protectores, pinturas de dispersión de brillo, colorantes y tintas de impresión. Este producto es un polímero multifuncional líquido libre de solventes orgánicos. Vea Menos | |
| NUOSPERSE® FX 605 | Elementis | NUOSPERSE® FX 605 es un agente dispersante de baja espuma para sistemas acuosos. Contrarresta la floculación de pigmentos en medios fuertemente alcalinos, neutrales y de ácido leve. El producto también es estable ante la hidrólisis y por lo tanto retiene ...Vea Mas NUOSPERSE® FX 605 es un agente dispersante de baja espuma para sistemas acuosos. Contrarresta la floculación de pigmentos en medios fuertemente alcalinos, neutrales y de ácido leve. El producto también es estable ante la hidrólisis y por lo tanto retiene su actividad, incluso después de un tiempo prolongado de almacenamiento del sistema de revestimiento. Vea Menos | |
| NUOSPERSE® W-22 | Elementis | NUOSPERSE® W-22 es altamente efectivo para humectar y dispersar pigmentos en sistemas acuosos y para estabilizar la dispersión final a fin de evitar la floculación y el desvío de la viscosidad. | |
| NUOSPERSE® W-28 | Elementis | NUOSPERSE® W-28 es altamente efectivo para humectar y dispersar pigmentos en sistemas acuosos y para estabilizar la dispersión final a fin de evitar la floculación y el desvío de la viscosidad. | |
| NUOSPERSE® W-30 | Elementis | NUOSPERSE® W-30 es un agente dispersante ecológico que puede utilizarse en todo tipo de pigmentos para contribuir al desarrollo total del color y a lograr el máximo volumen de producción. Es altamente eficaz para humectar y dispersar pigmentos en sistemas...Vea Mas NUOSPERSE® W-30 es un agente dispersante ecológico que puede utilizarse en todo tipo de pigmentos para contribuir al desarrollo total del color y a lograr el máximo volumen de producción. Es altamente eficaz para humectar y dispersar pigmentos en sistemas acuosos y para estabilizar la dispersión terminada y prevenir la re-floculación y el desvío de la viscosidad. Vea Menos | |
| NUOSPERSE® W-33 | Elementis | NUOSPERSE® W-33 es un agente dispersante ecológico que puede utilizarse en todo tipo de pigmentos para contribuir al desarrollo total del color y a lograr el máximo volumen de producción. Es altamente eficaz para humectar y dispersar pigmentos en sistemas...Vea Mas NUOSPERSE® W-33 es un agente dispersante ecológico que puede utilizarse en todo tipo de pigmentos para contribuir al desarrollo total del color y a lograr el máximo volumen de producción. Es altamente eficaz para humectar y dispersar pigmentos en sistemas acuosos, y para estabilizar la dispersión terminada y prevenir la re-floculación y el desvío de la viscosidad. Vea Menos | |
| NUOSPERSE® W-39 | Elementis | NUOSPERSE® W-39 es un agente dispersante ecológico que puede utilizarse en una gran variedad de pigmentos para contribuir al desarrollo total del color y a lograr el máximo volumen de producción. Es altamente eficaz para humectar y dispersar pigmentos en ...Vea Mas NUOSPERSE® W-39 es un agente dispersante ecológico que puede utilizarse en una gran variedad de pigmentos para contribuir al desarrollo total del color y a lograr el máximo volumen de producción. Es altamente eficaz para humectar y dispersar pigmentos en sistemas acuosos, y para estabilizar la dispersión terminada y prevenir la re-floculación y el desvío de la viscosidad. Vea Menos | |
| NUOSPERSE® XL-1/80 | Elementis | NUOSPERSE® XL-1/80 está diseñado para ser utilizado en la fabricación de colorantes universales sin glicol para tintura en máquinas y en plantas de fabricación. Este producto se usa además como aditivo para mejorar la compatibilidad de sistemas de pintura...Vea Mas NUOSPERSE® XL-1/80 está diseñado para ser utilizado en la fabricación de colorantes universales sin glicol para tintura en máquinas y en plantas de fabricación. Este producto se usa además como aditivo para mejorar la compatibilidad de sistemas de pintura/ colorante. Vea Menos | |
| NUTRISTIM® PURE AH | DuPont Nutrition & Biosciences | NUTRISTIM® PURE AH is a highly purified anhydrous betaine product derived from non-GM sugar beets. It is intended for use in a wide range of industrial applications and it is highly suited for use in inkjet printing inks. This product functions as a hume...Vea Mas NUTRISTIM® PURE AH is a highly purified anhydrous betaine product derived from non-GM sugar beets. It is intended for use in a wide range of industrial applications and it is highly suited for use in inkjet printing inks. This product functions as a humectant and it is highly effective for prevention of moisture loss. When combined with other ink ingredients and components, NUTRISTIM® PURE AH may provide the following benefits: improved ink stability, improved recovery of inkjet printing systems after idle periods, improved water-fastness, reduced feathering of images, and reduced show-through. Vea Menos | |
| Octosol A-18 | Tiarco Chemical | Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, a...Vea Mas Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, and foaming. It is used as a textile-softening agent, as a suspending agent in emulsion polymerization, as a foaming agent in latex compounds, and in cleaning and penetrating formulations. Vea Menos | |
| Octowet 70 | Tiarco Chemical | Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...Vea Mas Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Vea Menos | |
| Octowet 70D | Tiarco Chemical | Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely use...Vea Mas Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Vea Menos | |
| Octowet 70MS | Tiarco Chemical | Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...Vea Mas Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Vea Menos | |
| Octowet 70PG | Tiarco Chemical | Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...Vea Mas Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Additionally, Octowet 70PG is formulated so as to provide the surfactant in a non-flammable aqueous form. Vea Menos | |
| Octowet 70X | Tiarco Chemical | Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...Vea Mas Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Vea Menos | |
| Octowet 75 | Tiarco Chemical | Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...Vea Mas Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Vea Menos | |
| Octowet 75PG | Tiarco Chemical | Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a p...Vea Mas Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Vea Menos | |
| Octowet 75X | Tiarco Chemical | Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...Vea Mas Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Vea Menos | |
| Opalion Defoamer | Opalion | Opalion Defoamer fruto de la tecnología más reciente, se caracteriza por su alta eficiencia siendo muy efectivo a bajos niveles de dosificación. No contiene siliconas, no es afectado por altas temperaturas y el rango de pH de aplicación es muy amplio, lo ...Vea Mas Opalion Defoamer fruto de la tecnología más reciente, se caracteriza por su alta eficiencia siendo muy efectivo a bajos niveles de dosificación. No contiene siliconas, no es afectado por altas temperaturas y el rango de pH de aplicación es muy amplio, lo cual lo diferencia de los antiguos antiespumas a base de estearatos. Presenta un olor agradable y posee bajísima toxicidad. Vea Menos | |
| Opaque dispersion 1090 | Opalion | Las dispersiones opacas han sido un gran adelanto en la formulación de pinturas ya que permiten reducir dióxido de titanio con la ventaja de tener pinturas de baja densidad. Lamentablemente el elevado costo de los monómeros acrílicos no ha dejado prospera...Vea Mas Las dispersiones opacas han sido un gran adelanto en la formulación de pinturas ya que permiten reducir dióxido de titanio con la ventaja de tener pinturas de baja densidad. Lamentablemente el elevado costo de los monómeros acrílicos no ha dejado prosperar esta tecnología. Por otro lado el dióxido de titanio se ha mantenido en su precio a través del tiempo. Después de años de investigación se ha desarrollado la dispersión opaca 1090 que puede ahora competir en precio en los rubros de pinturas de interior y exterior, no así en techados donde se necesita mayor flexibilidad, para lo cual formularemos una dispersión opaca similar pero más elástica. La dispersión opaca 1090 tiene un perfecto balance entre su poder cubriente y ligante. Esto permite hacer un cambio directo de la dispersión en uso aumentando el cubritivo en forma notoria, manteniendo las demás propiedades. Vea Menos | |
| OPTIGEL® WX | BYK | Optigel® WX, un producto de esmectita especialmente activada y seleccionada, tiene una alta capacidad de crecimiento en agua y muestra un marcado efecto tixotrópico espesante. Este producto es estable en ácidos y bases diluidas y es especialmente efectivo...Vea Mas Optigel® WX, un producto de esmectita especialmente activada y seleccionada, tiene una alta capacidad de crecimiento en agua y muestra un marcado efecto tixotrópico espesante. Este producto es estable en ácidos y bases diluidas y es especialmente efectivo en sistemas alcalinos, neutrales y acídicos. Este producto tiene aplicaciones en pinturas de emulsión, revestimientos de liberación, pinturas de silicato, decapantes de pintura, pinturas reducibles en agua, limpiadores líquidos, tintas, abrasivos y pastas para moler, y revestimientos para autos. Vea Menos | |
| Optilith™ 1486 A | Lawter | Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optil...Vea Mas Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optilith™ 1486 A is recommended for use in heatset offset and sheet-fed offset inks. Vea Menos | |
| Optilith™ 3094 A | Lawter | Optilith™ 3094 A is an anti-oxidant solution developed for heatset inks where skin formation in the inks would be harmful because of the potential contamination of delivery pipes and ink pumps that feed the ink fountains at the press. The product is usefu...Vea Mas Optilith™ 3094 A is an anti-oxidant solution developed for heatset inks where skin formation in the inks would be harmful because of the potential contamination of delivery pipes and ink pumps that feed the ink fountains at the press. The product is useful in heatset inks where metallic driers might be needed to attain the necessary squalene resistance. Apart from uses in heatset inks, Optilith™ 3094 A can be used in sheet-fed inks, although at lower levels. Vea Menos | |
| Optilith™ 4 A | Lawter | Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for ...Vea Mas Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for use in heatset and sheet-fed offset inks and in flushing vehicles. Vea Menos | |
| Optilith™ AM A | Lawter | Optilith™ AM A is an anti-mist compound that is 95% non-volatile and in the form of a high solids paste. It offers maximum reduction in misting without any bad effect on ink rheology or gloss. Optilith™ AM A is suitable for use in heatset offset, sheet-fe...Vea Mas Optilith™ AM A is an anti-mist compound that is 95% non-volatile and in the form of a high solids paste. It offers maximum reduction in misting without any bad effect on ink rheology or gloss. Optilith™ AM A is suitable for use in heatset offset, sheet-fed offset inks and in metal deco and OPV applications. Vea Menos | |
| Optilith™ TRG A | Lawter | Optilith™ TRG A is a non-volatile gelled tack reducer that decreases the initial tack without "destroying" the rheological properties of ink. It also flattens the tack curve providing better transfer and tack stability. Optilith™ TRG A is suitable for use...Vea Mas Optilith™ TRG A is a non-volatile gelled tack reducer that decreases the initial tack without "destroying" the rheological properties of ink. It also flattens the tack curve providing better transfer and tack stability. Optilith™ TRG A is suitable for use in all oil-based offset inks including sheet-fed, heatset and web no-heat applications. Vea Menos | |
| OptiXan™ 40 | ADM | OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology contro...Vea Mas OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. Vea Menos | |
| OptiXan™ Dispersible | ADM | OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such ...Vea Mas OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. Vea Menos | |
| P-Toluene Sulfonamide (OPTSA) | Hainan Zhongxin Chemical Co., Ltd. | P-Toluene Sulfonamide (OPTSA) is a white crystalline powder that is 99.5% pure. It is primarily used as a flame retardant additive for paints, inks and plastics. P-Toluene Sulfonamide (OPTSA) can be use as a plasticizer in the production of fluorescent, p...Vea Mas P-Toluene Sulfonamide (OPTSA) is a white crystalline powder that is 99.5% pure. It is primarily used as a flame retardant additive for paints, inks and plastics. P-Toluene Sulfonamide (OPTSA) can be use as a plasticizer in the production of fluorescent, phenolic and polyamide resins. Vea Menos | |
| P-Toluene Sulfonyl Chloride (OPTSC) | Hainan Zhongxin Chemical Co., Ltd. | P-Toluene Sulfonyl Chloride (OPTSC) is a white crystalline powder that is 99% pure. It is mainly used as an analytical reagent and can be used as a flame retardant additive in paints and plastic. In addition, P-Toluene Sulfonyl Chloride (OPTSC) can also b...Vea Mas P-Toluene Sulfonyl Chloride (OPTSC) is a white crystalline powder that is 99% pure. It is mainly used as an analytical reagent and can be used as a flame retardant additive in paints and plastic. In addition, P-Toluene Sulfonyl Chloride (OPTSC) can also be used in synthesizing organics, hormones, and various dyes. Vea Menos | |
| Pale Grinders | ADM | Pale Grinders, in the form of amber clear liquid, is linseed oil with linseed fatty acids, high acidity, good wetting properties, and light in color. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| Pangel B10 | Tolsa, S.A. | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...Vea Mas Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. Vea Menos | |
| Pangel B20 | Tolsa, S.A. | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...Vea Mas Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. Vea Menos | |
| Pangel B40 | Tolsa, S.A. | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...Vea Mas Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. Vea Menos | |
| Pangel OM8 | Tolsa, S.A. | Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosi...Vea Mas Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, bituminous undercoats, varnishes, and inks. Vea Menos | |
| Pangel OMD1 | Tolsa, S.A. | Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control...Vea Mas Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, varnishes, lubricating greases, and bituminous undercoats. Vea Menos | |
| Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...Vea Mas Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. Vea Menos | |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| PARAFFLEX® 4797A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard. | |
| PC 1644™ Defoamer | Allnex | El desespumador PC® 1644 es una solución con 40 % de polímero de acrílico en un disolvente de petróleo. Se desarrolló para brindar un rendimiento desespumante mejorado frente a PC®1244 en fluidos orgánicos no acuosos. PC®1644 es un desespumador de uso gen...Vea Mas El desespumador PC® 1644 es una solución con 40 % de polímero de acrílico en un disolvente de petróleo. Se desarrolló para brindar un rendimiento desespumante mejorado frente a PC®1244 en fluidos orgánicos no acuosos. PC®1644 es un desespumador de uso general que brinda un control superior de la espuma en bajos niveles de uso, generalmente, entre un 10 y 20 % más bajo en el nivel de uso comparado con PC®1244. PC®1644 no contiene silicona y emana muy poco olor. Vea Menos | Request Sample |
| PC-1244™ Defoamer | Allnex | El desespumador PC® 1244 es una solución de polímero orgánico en un disolvente de petróleo. Mejora las propiedades de liberación de aire y evita la formación de espuma en fluidos ácidos u orgánicos neutros a temperaturas de hasta 400 °F. También se desemp...Vea Mas El desespumador PC® 1244 es una solución de polímero orgánico en un disolvente de petróleo. Mejora las propiedades de liberación de aire y evita la formación de espuma en fluidos ácidos u orgánicos neutros a temperaturas de hasta 400 °F. También se desempeña en algunos sistemas alcalinos. Ha demostrado una capacidad de retener su capacidad desespumante a lo largo de períodos extensos. Funciona sin afectar materialmente la tensión de superficie de los medios. PC-1244 no contiene silicona. Entre las aplicaciones del desespumador PC-1244, se incluyen el uso en aceites para engranajes, lubricantes de especialidad, y aceites para turbinas y transmisión. Vea Menos | Request Sample |
| PC-1344™ Defoamer | Allnex | El desespumador PC® 1344 es un polímero orgánico de alta viscosidad. Mejora las propiedades de liberación de aire y evita la formación de espuma en fluidos ácidos u orgánicos neutros a temperaturas de hasta 400 °F. También se desempeña en algunos sistemas...Vea Mas El desespumador PC® 1344 es un polímero orgánico de alta viscosidad. Mejora las propiedades de liberación de aire y evita la formación de espuma en fluidos ácidos u orgánicos neutros a temperaturas de hasta 400 °F. También se desempeña en algunos sistemas alcalinos. Ha demostrado una capacidad de retener su capacidad desespumante a lo largo de períodos extensos. Funciona sin afectar materialmente la tensión de superficie de los medios. PC-1344 no contiene silicona. Entre las aplicaciones del desespumador PC-1344, se incluyen el uso en los aceites para engranajes, lubricantes de especialidad, y aceites para turbinas o transmisión. Vea Menos | Request Sample |
| PC-1844™ Defoamer | Allnex | El desespumador PC® 1844 es una solución con 40 % de polímero de acrílico en un disolvente de petróleo. Proporciona un rendimiento mejorado a altas temperaturas y mayor eficiencia. Se recomienda PC-1844 para usos de alto rendimiento en los que PC-1244, PC...Vea Mas El desespumador PC® 1844 es una solución con 40 % de polímero de acrílico en un disolvente de petróleo. Proporciona un rendimiento mejorado a altas temperaturas y mayor eficiencia. Se recomienda PC-1844 para usos de alto rendimiento en los que PC-1244, PC-1644 o los desespumadores de silicona no ofrecen un rendimiento adecuado. Entre estos usos, se encuentran aceites para engranaje, lubricantes de especialidad, amortiguadores y aceites hidráulicos para turbinas y transmisión. Vea Menos | Request Sample |
| PC-2544™ Defoamer | Allnex | PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty appl...Vea Mas PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty applications where efficient high temperature performance is required. Vea Menos | Request Sample |
| PC-3144® Defoamer | Allnex | PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB...Vea Mas PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well. Vea Menos | Request Sample |
| PC-4144-DEFOAMER | Allnex | PC-4144 is a highly efficient defoamer for metal working fluids and metal working fluid emulsions with very low VOC content ( Active substance approx. 100 % \r\n\r\n. | Request Sample |
| PEO-1 | Sumitomo Seika Chemicals Co., Ltd. | PEO-1 is a nonionic water-soluble thermoplastic polymer. PEO-1 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-2 | Sumitomo Seika Chemicals Co., Ltd. | PEO-2 is a nonionic water-soluble thermoplastic polymer. PEO-2 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-3 | Sumitomo Seika Chemicals Co., Ltd. | PEO-3 is a nonionic water-soluble thermoplastic polymer. PEO-3 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-4 | Sumitomo Seika Chemicals Co., Ltd. | PEO-4 is a nonionic water-soluble thermoplastic polymer. PEO-4 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-8 | Sumitomo Seika Chemicals Co., Ltd. | PEO-8 is a nonionic water-soluble thermoplastic polymer. PEO-8 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETROFIBE® 0201A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0201A is a dark brown industrial grade petrolatum of medium-hard consistency. PETROFIBE® 0201A finds economical use in applications not requiring the more expensive USP or NF grades. | |
| PETROFIBE® 0251A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0251A is a mixture of soft petroleum waxes. | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Plastiopal Eco | Opalion | Los ftalatos son sospechados de producir ciertas enfermedades al hombre, aunque las opiniones están divididas. Por ello el reemplazo del dop: ha sido el objetivo de los químicos de este tiempo. El plastiopal eco puede reemplazar al dop en un gran número d...Vea Mas Los ftalatos son sospechados de producir ciertas enfermedades al hombre, aunque las opiniones están divididas. Por ello el reemplazo del dop: ha sido el objetivo de los químicos de este tiempo. El plastiopal eco puede reemplazar al dop en un gran número de usos sin toxicidad, ya que es de origen vegetal. Vea Menos | |
| Polyether Modified Siloxane FD-408 | Zhejiang Feidian Chemical Co., Ltd. | FD-408 es un poliéter siloxano modificado con baja tensión superficial y buena permeabilidad. Debido a su excelente dispersión y permeabilidad, se puede utilizar como un agente humectante de sustratos para revestimientos y tintas a base de agua. Este prod...Vea Mas FD-408 es un poliéter siloxano modificado con baja tensión superficial y buena permeabilidad. Debido a su excelente dispersión y permeabilidad, se puede utilizar como un agente humectante de sustratos para revestimientos y tintas a base de agua. Este producto también se puede utilizar como un agente humectante y agente de nivelación para los poliuretanos a base de agua. Vea Menos | |
| Polysperse™ A | Lawter | Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resista...Vea Mas Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resistance and gloss. Polysperse™ A is suitable for use in flexographic and gravure inks, heatset and sheet-fed inks and in UV and metal decorating inks. Vea Menos | |
| POST® 4 | Elementis | POST® 4 es un aditivo a base de aceite de ricino diseñado para agregar a los excipientes de la pintura y estimular la viscosidad y la resistencia al descuelgue. Está diseñado principalmente para sistemas de revestimiento alifáticos no acuosos. La posibili...Vea Mas POST® 4 es un aditivo a base de aceite de ricino diseñado para agregar a los excipientes de la pintura y estimular la viscosidad y la resistencia al descuelgue. Está diseñado principalmente para sistemas de revestimiento alifáticos no acuosos. La posibilidad de añadirlo al final, permite que este producto sea empleado como agente de corrección posterior agregándolo a los lotes de pintura terminados que requieren corrección del fluido y/o una mejora de la suspensión del pigmento. Vea Menos | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...Vea Mas Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. Vea Menos | |
| Propyl Gallate | Derbiotec | Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant...Vea Mas Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant. It can be used in the Food industry to avoid the oxidation of oils and fats. As an additive, it may be found in edible fats, oils, mayonnaise, fresh pork sausage, dried meat, shortening, baked goods, candy and dried milk. Also it is used in hair grooming products. Vea Menos |
