| BYK®-016 | BYK | BYK®-016 is a mineral oil and silicone-free defoamer for aqueous adhesives and sealants. | |
| BYK®-022 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-023 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-024 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-025 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-028 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-035 | BYK | Antiespumante de aceite mineral para pinturas y yesos de emulsión. Mezcla de aceites minerales con base de parafina y componentes hidrofóbicos, conteniendo silicón. | |
| BYK®-037 | BYK | Antiespumante de aceite mineral para pinturas de emulsión, emulsiones industriales, yesos de emulsión y adhesivos de emulsión; para des-airar durante la producción y la aplicación. | |
| BYK®-038 | BYK | Antiespumante del aceite mineral para pinturas de emulsión, emulsiones industriales, yesos de emulsión y adhesivos de emulsión; para des-airar durante la producción y la aplicación. | |
| BYK®-077 | BYK | Antiespumante de silicón y aditivo para la superficie para sistemas transmitidos por solvente. Solución de un polimetilalquilsiloxano. | |
| BYK®-085 | BYK | Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exist...Vea Mas Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exists. Vea Menos | |
| BYK®-088 | BYK | Silicone air release additive recommended for PUR-based adhesives. Also suitable for epoxy systems. | |
| BYK®-093 | BYK | High Persistence Silicone Defoamer for Aqueous Adhesives and Sealants. This defoamer combines high efficiency with broad compatibilty. | |
| BYK®-1610 | BYK | BYK®-1610 is a defoamer for emulsion-based adhesives and sealants. | |
| BYK®-1615 | BYK | BYK®-1615 is a defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1642 | BYK | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1760 | BYK | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | |
| BYK®-3400 | BYK | BYK®-3400 is a silicone surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting. | |
| BYK®-3410 | BYK | BYK®-3410 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting. | |
| BYK®-345 | BYK | Surfactante de silicón para mejorar la humectación de substrato en sistemas acuosos. Dioxano poliéter-modificado. | |
| BYK®-346 | BYK | Surfactante de silicón para mejorar la humectación de substrato en sistemas acuosos. Solución de un siloxano poliéter-modificado. | |
| BYK®-347 | BYK | Surfactante de silicón para mejorar la humectación de substrato en sistemas acuosos. Siloxano poliéter-modificado. | |
| BYK®-348 | BYK | Surfactante de silicón para mejorar la humectación de substrato en sistemas acuosos. Siloxano poliéter-modificado. | |
| BYK®-349 | BYK | Surfactante de silicón para mejorar la humectación de substrato en sistemas acuosos. Siloxano poliéter-modificado. | |
| BYK®-9076 | BYK | BYK®-9076 is a high molecular weight additive for solvent-free adhesives and sealants BYK®-9076 is especially useful for the stabilization of acidic and neutral types of carbon black. | |
| BYK®-9077 | BYK | Es una aditivo humectante y de dispersión para sistemas sin solvente y concentrados de pigmento, con copolímero de peso molecular alto con grupos afines al pigmento. | |
| BYK®-A 530 | BYK | Air release agent and defoamer for solvent-based and solvent-free epoxy systems. | |
| BYK®-A 535 | BYK | Silicone-free defoamer / air release additive for solvent-free and solvent-borne epoxy and PUR-based adhesives and sealants. | |
| BYK®-A 550 | BYK | BYK®-A 550 shows a strong air release effect without creating a strong haziness effect. | |
| BYK®-A 555 | BYK | BYK®-A 555 shows the highest efficiency in various adhesive applications. | |
| BYK®-DYNWET 800 | BYK | BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting. | |
| BYK®-W 940 | BYK | BYK®-W 940 prevents sedimentation of mineral fillers such as calcium carbonate and aluminium trihydroxide and minimizes flooding and floating when organic and inorganic pigments are used. | |
| BYK®-W 961 | BYK | BYK®-W 961 is used as a wetting and dispersing additive for mineral fillers to prevent sedimentation. | |
| BYK®-W 966 | BYK | BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentati...Vea Mas BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentation. Vea Menos | |
| BYK®-W 969 | BYK | BYK®-W 969 is used as a wetting and dispersing additive with viscosity reducing properties for adhesives and sealants. | |
| BYK®-W 980 | BYK | BYK®-W 980 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide. It reduces the viscosity, so that a higher filler loading is possible and helps to prevent sedimentation. | |
| BYK®-W 985 | BYK | BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedim...Vea Mas BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedimentation. Vea Menos | |
| CAB-O-SIL® EH-5F | Univar Solutions | CAB-O-SIL® EH-5F is a high-purity material that can act as carrier, flavor masking, anti-settling, thickening, anti-caking, and fat substitution additives in food applications. | Request Sample |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...Vea Mas CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. Vea Menos | |
| CAB-O-SIL® EH5 | Univar Solutions | CAB-O-SIL® EH5 is a very high surface fumed silica which can increase the viscosity of liquid systems and provide significant reinforcement of silicone and organic rubbers. | Request Sample |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...Vea Mas CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. Vea Menos | |
| CAB-O-SIL® H5 | Univar Solutions | CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), ...Vea Mas CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), and anti-settling behavior in liquid systems. High shear dispersion equipment is required to realize the full benefits of H-5 fumed silica. For clear coatings and other systems, well-dispersed CAB-O-SIL® H5 fumed silica allows for good transparency. Vea Menos | Request Sample |
| CAB-O-SIL® L90 | Univar Solutions | CAB-O-SIL® L90 is a low surface area fumed silica. It is untreated and provides rheology control and reinforcement for silicone sealants and elastomer applications. It is the most easily dispersed of Cabot’s untreated fumed silicas. | Request Sample |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...Vea Mas CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. Vea Menos | |
| CAB-O-SIL® LM150 | Univar Solutions | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...Vea Mas CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. Vea Menos | Request Sample |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...Vea Mas CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. Vea Menos | |
| CAB-O-SIL® M-5 | Univar Solutions | CAB-O-SIL® M-5 is a medium surface fumed silica which enables a significant increase in viscosity in liquid systems, free flow of powders and reinforcement of silicone and organic rubbers. | Request Sample |
| CAB-O-SIL® M-5F | Univar Solutions | CAB-O-SIL® M-5F is a high-purity material that can act as a carrier and a flavor masking, anti-settling, thickening, anti-caking, and fat substitution additive in food applications. | Request Sample |
| CAB-O-SIL® M7D | Univar Solutions | CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone r...Vea Mas CAB-O-SIL® M7D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL M7D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL M-7D fumed silica, further modification of its surface is necessary to prevent crepe hardening. Vea Menos | Request Sample |
| CAB-O-SIL® MS75D | Univar Solutions | CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silic...Vea Mas CAB-O-SIL® MS75D is a medium-high surface area fumed silica that reinforces silicone rubber. The higher bulk density of CAB-O-SIL MS-75D fumed silica allows for faster incorporation and easier handling. It is suitable for use in the reinforcement of silicone rubbers, including heat-cured rubber, high temp vulcanizing or high-consistency rubber (HTV or HCR), and liquid silicone rubber (LSR), in which it can increase hardness, tensile strength, and elongation. Due to the hydrophilic surface of CAB-O-SIL MS-75D fumed silica, further modification of its surface is necessary to prevent crepe hardening. Vea Menos | Request Sample |
| CAB-O-SIL® PTG | Univar Solutions | CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. ...Vea Mas CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. This thixotropic behavior enables good penetration of the resin into the matrix during application and prevents dripping. Vea Menos | Request Sample |
| CAB-O-SIL® TS-382 | Univar Solutions | CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performa...Vea Mas CAB-O-SIL® TS-382 is a medium surface area fumed silica that has been surface-modified with octyltrimethoxysilane. The treatment replaces some of the hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance than untreated silica. Vea Menos | Request Sample |
| CAB-O-SIL® TS5022 | Univar Solutions | CAB-O-SIL® TS5022 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls on the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...Vea Mas CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. Vea Menos | |
| CAB-O-SIL® TS530 | Univar Solutions | CAB-O-SIL® TS530 has a surface that has been treated with hexamethyldisilazane (HMDZ). This treatment replaces hydroxyls in the surface of the silica, resulting in increased hydrophobicity and very different performance features than untreated silica. | Request Sample |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...Vea Mas CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. Vea Menos | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...Vea Mas CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. Vea Menos | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...Vea Mas CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. Vea Menos | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...Vea Mas CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. Vea Menos | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...Vea Mas CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. Vea Menos | |
| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...Vea Mas CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. Vea Menos | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...Vea Mas CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. Vea Menos | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...Vea Mas CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. Vea Menos | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | El surfactante Carbowet® 138 es un aditivo multifuncional para la humectación de pigmentos y sustratos. Este surfactante no iónico generalmente se utiliza solo o en combinación con un surfactante aniónico, Este rentable surfactante puede proporcionar rápi...Vea Mas El surfactante Carbowet® 138 es un aditivo multifuncional para la humectación de pigmentos y sustratos. Este surfactante no iónico generalmente se utiliza solo o en combinación con un surfactante aniónico, Este rentable surfactante puede proporcionar rápida humectación de sustratos y pigmentos y servir para una amplia gama de aplicaciones. Vea Menos | |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Agente humectante de substrato, el Surfynol CT-211 se emplea en revestimientos a base de agua, tintas, adhesivos y muchos otros sistemas. Los niveles de uso estarán entre 0,1 y 3,0% en formulación total. | |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Interface & Performance | En aplicaciones de pulido de pigmento, Surfynol CT-221 mejora el desarrollo de color mediante la humectación superior de las partículas de pigmento, y controla la formación de espuma debida al proceso de fabricación. Proporciona baja viscosidad en altos c...Vea Mas En aplicaciones de pulido de pigmento, Surfynol CT-221 mejora el desarrollo de color mediante la humectación superior de las partículas de pigmento, y controla la formación de espuma debida al proceso de fabricación. Proporciona baja viscosidad en altos cargamentos de pigmento y excelente estabilidad de dispersión. Vea Menos | |
| CARDIS™ 325 | Univar Solutions | CARDIS™ 325 offers low molecular weight polymers with unique chemical and physical properties. Chemically, these products contain oxygenated functional groups such as acids, esters, and alcohols. These functional groups facilitate water emulsification and...Vea Mas CARDIS™ 325 offers low molecular weight polymers with unique chemical and physical properties. Chemically, these products contain oxygenated functional groups such as acids, esters, and alcohols. These functional groups facilitate water emulsification and also improve solvent solubility as compared to inert polymers. Physical property characteristics include a range of melt points, hardness levels, and melt viscosities. Vea Menos | Request Sample |
| CARDIS™ 36 | Univar Solutions | CARDIS™ 36 offers low molecular weight polymers with unique chemical and physical properties. Chemically, these products contain oxygenated functional groups such as acids, esters, and alcohols. These functional groups facilitate water emulsification and ...Vea Mas CARDIS™ 36 offers low molecular weight polymers with unique chemical and physical properties. Chemically, these products contain oxygenated functional groups such as acids, esters, and alcohols. These functional groups facilitate water emulsification and also improve solvent solubility as compared to inert polymers. Physical property characteristics include a range of melt points, hardness levels, and melt viscosities. Vea Menos | Request Sample |
| Castor Oil Ethoxylates - PEG-25-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-25-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber...Vea Mas Castor Oil Ethoxylates - PEG-25-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. Vea Menos | |
| Castor Oil Ethoxylates - PEG-40-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-40-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber...Vea Mas Castor Oil Ethoxylates - PEG-40-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. Vea Menos | |
| Castor Oil Ethoxylates - PEG-60-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-60-CO is a white to yellow liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, ...Vea Mas Castor Oil Ethoxylates - PEG-60-CO is a white to yellow liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. Vea Menos | |
| Castor Oil Ethoxylates - PEG-7-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-7-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber,...Vea Mas Castor Oil Ethoxylates - PEG-7-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. Vea Menos | |
| Castor Oil Pale Pressed | Welch, Holme & Clark Co., Inc. | Castor Oil Pale Pressed is the fixed oil attained from the seed of Ricinus Communis Linne with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for ...Vea Mas Castor Oil Pale Pressed is the fixed oil attained from the seed of Ricinus Communis Linne with a characteristically clear and free of suspended matter appearance, and a slightly characteristic aroma. Chemical engineers have come up with numerous uses for castor oil and its derivatives, including coatings, lubricating grease, emulsifiers, polyamide 11 (Nylon 11) engineering plastic, sealants, inks, and more. Industrial Castor Oil has a specific gravity of 0.957 to 0.961 at 25°C, an iodine value of 83 to 88, and a hydroxyl value of 160 to 168. Vea Menos | |
| Castor Oil U.S.P. | Welch, Holme & Clark Co., Inc. | Castor Oil U.S.P. is pale-colored oil extracted from castor oil beans, which are the seeds of Ricinus Communis Linné, with a slightly characteristic aroma. It is used in plastics, textiles, and in a number of inks and industrial adhesives, where the oil i...Vea Mas Castor Oil U.S.P. is pale-colored oil extracted from castor oil beans, which are the seeds of Ricinus Communis Linné, with a slightly characteristic aroma. It is used in plastics, textiles, and in a number of inks and industrial adhesives, where the oil is used as a drying oil in the paints, inks, and varnishes. Castor oil is popular due to the fact that its plentiful chemical derivatives are a "renewable sources, bio-degradable and eco-friendly." Castor Oil U.S.P. has a specific gravity between the ranges of 0.957 to 0.961 at 25°C and a saponification value of 176 to 182. Vea Menos | |
| CDH | Kowa American Corporation | CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...Vea Mas CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. Vea Menos | Request Sample |
| CELLOSIZE™ EP-09 | Univar Solutions | CELLOSIZE™ EP-09 is a hydroxyethyl cellulose used in paints, graphic arts, and adhesives. | Request Sample |
| CELLOSIZE™ QP 100MH | Univar Solutions | CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thi...Vea Mas CELLOSIZE™ QP 100MH is the highest molecular weight cellulosic polymer offered by The Dow Chemical Company, and aqueous solutions of CELLOSIZE QP 100MH HEC are the most pseudoplastic (non-Newtonian) in their rheology. CELLOSIZE QP 100MH HEC is used to thicken household cleaning products, in the fabrication of toilet tank drop-in tablets, and other applications where very high thickening efficiency is the dominant performance requirement. Vea Menos | Request Sample |
| CELLOSIZE™ QP 15000H | Univar Solutions | CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ Q...Vea Mas CELLOSIZE™ QP 15000H is a medium molecular weight cellulosic polymer, useful for general thickening of water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 15000H HEC are 4 to 6 pounds per 100 gallons, and in personal care/household cleaners, the levels of CELLOSIZE™ QP 15000H HEC are typically between 0.5% and 1%. Vea Menos | Request Sample |
| CELLOSIZE™ QP 300 | Univar Solutions | CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical us...Vea Mas CELLOSIZE™ QP 300 is a medium-low molecular weight cellulosic polymer used as both a protective colloid and a latex paint thickener. In the emulsion polymerization of vinyl and acrylic monomers to produce latexes for architectural coatings, the typical use level of CELLOSIZE QP 300 HEC in latex synthesis is 2% by weight (based on total monomers) in vinyl and vinyl-acrylic latex formulations (usually less in all-acrylic formulations). Vea Menos | Request Sample |
| CELLOSIZE™ QP 30000H | Univar Solutions | CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE...Vea Mas CELLOSIZE™ QP 30000H is a medium-high molecular weight cellulosic polymer used as a general thickener for water-borne systems including latex paints, personal care products, and household cleaning products. In latex paints, typical use levels of CELLOSIZE™ QP 30000H HEC are 4 to 6 pounds per 100 gallons, and in personal care and household cleaners, the levels of CELLOSIZE™ QP 30000H HEC are typically between 0.5% and 1%. Vea Menos | Request Sample |
| CELLOSIZE™ QP 4400H | Univar Solutions | CELLOSIZE™ QP 4400H is a medium molecular weight cellulosic polymer useful for general thickening applications, and is used primarily as a latex paint thickener. Its excellent rheological properties give paints good flow and leveling characteristics. | Request Sample |
| CELLOSIZE™ QP 52000H | Univar Solutions | CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-join...Vea Mas CELLOSIZE™ QP 52000H is a high molecular weight cellulosic polymer that offers high thickening efficiency and is used as a general thickener for water-borne systems including latex paints, personal care products, household cleaning products, and tape-joint compounds. Vea Menos | Request Sample |
| CELLOSIZE™ QP-100MH-V | Univar Solutions | CELLOSIZE™ QP-100MH-V is a very high molecular weight hydroxyethyl cellulose. The product is surface treated to avoid gel or lump formation when dissolved in aqueous systems. | Request Sample |
| CERAMER™ 1608 | Univar Solutions | CERAMER™ 1608 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or ...Vea Mas CERAMER™ 1608 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or higher acid numbers than oxidized products, they are much harder with higher melting points. Vea Menos | Request Sample |
| CERAMER™ 67 | Univar Solutions | CERAMER™ 67 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or hi...Vea Mas CERAMER™ 67 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or higher acid numbers than oxidized products, they are much harder with higher melting points. Vea Menos | Request Sample |
| CERETAN T 90 | Munzing Chemie | CERETAN T 90 is a white fine granule that is a homopolymer hard paraffin. It is a lubricant and releasing agent that is a modification of hotmelt and is used coatings and adhesives. | |
| CERETAN T 91 | Munzing Chemie | CERETAN T 91 is a white fine granule that is a high metling fischer-tropsch wax. It is a lubricant and releasing agent that is a modification of hotmelt and is used coatings and adhesives. | |
| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Ceridust® 6050 M | Clariant Plastics & Coatings Ltd. | Ceridust® 6050 M is a micronized metallocene-based polypropylene wax. | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...Vea Mas CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. Vea Menos | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...Vea Mas CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. Vea Menos | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...Vea Mas CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). Vea Menos | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...Vea Mas CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. Vea Menos | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...Vea Mas CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). Vea Menos | |
| CF19-2615 | NuSil Silicone Technology 1 | CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel...Vea Mas CF19-2615 is a two-part, silicone elastomer that is optically clear and solvent free. It cures at room temperature or rapidly with the addition of heat. This product can be use for photonics applications such as photo detectors, HBLEDs, lasers, flat panel displays and discrete optics that require a 1.41 refractive index. It can also provide protection to electronic components and assemblies against vibration, shock, moisture, dust and other environmental hazards. Vea Menos | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...Vea Mas CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. Vea Menos | |
| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...Vea Mas CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. Vea Menos | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...Vea Mas CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. Vea Menos |
