| 205 | U.S. Zinc | 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...Vea Mas 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. Vea Menos | |
| 205H | U.S. Zinc | 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...Vea Mas 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. Vea Menos | |
| 205HSA | U.S. Zinc | 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...Vea Mas 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). Vea Menos | |
| 205L | U.S. Zinc | 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...Vea Mas 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. Vea Menos | |
| 205XL | U.S. Zinc | 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....Vea Mas 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. Vea Menos | |
| 210 | U.S. Zinc | 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...Vea Mas 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. Vea Menos | |
| 210E | U.S. Zinc | 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...Vea Mas 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. Vea Menos | |
| 210H | U.S. Zinc | 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...Vea Mas 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. Vea Menos | |
| 210HSA | U.S. Zinc | 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...Vea Mas 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. Vea Menos | |
| 210L | U.S. Zinc | 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...Vea Mas 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. Vea Menos | |
| AZO66 | U.S. Zinc | AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/c...Vea Mas AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/coating, ceramic, oil additive industries and in those applications where great purity is dire. Grade AZO66 is available in a pelleted form (AZO66P), in a treated pelleted form (AZO66PT), and with surface treatment (AZO66T). AZO66 has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. Vea Menos | |
| AZO66L | U.S. Zinc | AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than norma...Vea Mas AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than normal high purity particles. Grade AZO66L is available in a pelleted form (AZO66LP) and with the surface treatment (AZO66LT). AZO66L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. Vea Menos | |
| AZO66XL | U.S. Zinc | AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater tha...Vea Mas AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater than normal high purity particles. AZO66XL has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. Vea Menos | |
| AZO77H | U.S. Zinc | AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those ap...Vea Mas AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those applications where high purity and reactivity is required. Grade AZO77H is available with surface treatment (AZO77HT). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). Vea Menos | |
| AZO77HSA | U.S. Zinc | AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used...Vea Mas AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used in can sealants, latex compounds, zinc chemicals, plastics, paint/coating, and in the food can liner coating industry where the particularly fine particles freely convert certain accessible soluble into white sulfide, thus avoiding discoloration of food from sulfides of tin or iron. AZO77HSA is available with surface treatment (AZO77HSA-T), has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). Vea Menos | |
| BLS® 0113-3 | Mayzo, Inc. | BLS® 0113-3 is a non-discoloring liquid light stabilization system. It has a broad spectrum absorbance of damaging UV radiation and provides excellent long term UV stability. BLS® 0113-3 is used in adhesives, sealants, and coatings. | |
| BLS® 1328 | Mayzo, Inc. | BLS® 1328 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation, helping to preserve the original appearance and physical integrity. BLS® 1328 is used in organic pigments, ...Vea Mas BLS® 1328 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation, helping to preserve the original appearance and physical integrity. BLS® 1328 is used in organic pigments, protective coatings, automotive coating substrates, urethane solvents, thermosetting acrylic clear topcoats, and adhesives. Vea Menos | |
| BLS® 1622 | Mayzo, Inc. | BLS® 1622 is a high molecular weight hindered amine light stabilizer. It has minimal interaction with co-additives such as pigments and other stabilizers and thus is highly effective in systems using carbon black and pigmented systems. BLS® 1622 is used i...Vea Mas BLS® 1622 is a high molecular weight hindered amine light stabilizer. It has minimal interaction with co-additives such as pigments and other stabilizers and thus is highly effective in systems using carbon black and pigmented systems. BLS® 1622 is used in adhesives and sealants. Vea Menos | |
| BLS® 1710 | Mayzo, Inc. | BLS® 1710 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity. BLS® 1710 is used in adhesives and organ...Vea Mas BLS® 1710 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity. BLS® 1710 is used in adhesives and organic pigments. Vea Menos | |
| BLS® 1770 | Mayzo, Inc. | BLS® 1770 is a hindered amine light stabilizer offering excellent protection against ultraviolet degradation. It is free-flowing, low dust, non-coloring, and thermally stable. BLS® 1770 is used in tapes. | |
| BLS® 2908 | Mayzo, Inc. | BLS® 2908 is a benzoate-type light stabilizer that functions by scavenging free radicals formed during the photodegradation of plastic materials. It is non-discoloring and has low volatility. BLS® 2908 is used in tapes. | |
| BLS® 3035 | Mayzo, Inc. | BLS® 3035 is a solid cyanoacrylate-type UV absorber (UVA) and light stabilizer. It is inherently non-discoloring and is also chemically non-interacting with reactive monomers and polymerization catalysts. BLS® 3035 is used in adhesives and coatings. | |
| BLS® 3039 | Mayzo, Inc. | BLS® 3039 is a solid cyanoacrylate-type UV absorber (UVA) and light stabilizer. It is inherently non-discoloring and is also chemically non-interacting with reactive monomers and polymerization catalysts. BLS® 3039 is used in adhesives and coatings. | |
| BLS® 531 | Mayzo, Inc. | BLS® 531 is an ultraviolet light absorber (UVA) of the benzophenone class, imparting good light stability. It offers low color contribution and retards yellowing and loss of physical properties. BLS® 531 is used in adhesives and sealants where light stabi...Vea Mas BLS® 531 is an ultraviolet light absorber (UVA) of the benzophenone class, imparting good light stability. It offers low color contribution and retards yellowing and loss of physical properties. BLS® 531 is used in adhesives and sealants where light stability is a concern. Vea Menos | |
| BLS® 5411 | Mayzo, Inc. | BLS® 5411 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity of polymeric systems. BLS® 5411 is used i...Vea Mas BLS® 5411 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity of polymeric systems. BLS® 5411 is used in coatings (particularly thermo sets where low volatility is a concern), photographic products, sealants, and glazing materials for window lighting, signs, marine, and auto applications. Vea Menos | |
| BLS® 783 | Mayzo, Inc. | BLS® 783 is a synergistic blend of the hindered amine light stabilizers BLS® 1622 and BLS® 1944. The product is highly effective to improve light stability. It is non-discoloring, has good compatibility with polyolefin substrates, and is highly resistant ...Vea Mas BLS® 783 is a synergistic blend of the hindered amine light stabilizers BLS® 1622 and BLS® 1944. The product is highly effective to improve light stability. It is non-discoloring, has good compatibility with polyolefin substrates, and is highly resistant to extraction. BLS® 783 is used in tapes. Vea Menos | |
| BLS® 99-2 | Mayzo, Inc. | BLS® 99-2 is a liquid hydroxyphenyl-benzotriazole UV absorber. It provides outstanding light stability to many industrial and architectural coatings. This product blends easily and disperses completely resulting in lower loading requirements, virtually el...Vea Mas BLS® 99-2 is a liquid hydroxyphenyl-benzotriazole UV absorber. It provides outstanding light stability to many industrial and architectural coatings. This product blends easily and disperses completely resulting in lower loading requirements, virtually eliminating the particle dispersion problems associated with traditional powder UV absorbers. BLS® 99-2 is used in coatings and coating solvents. Vea Menos | |
| GENOCURE* EMK | Rahn USA Corp. | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...Vea Mas GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. Vea Menos | Request Sample |
| GENOMER* 5271 | Rahn USA Corp. | GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and a...Vea Mas GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and adhesives. GENOMER* 5271 contributes to excellent cure response, toughness, flexibility and adhesion. Unlike conventional amine synergists, GENOMER* 5271 reacts to become part of the product network, leading to lower odor, lower extractables and better overall properties. Vea Menos | Request Sample |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...Vea Mas MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. Vea Menos | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...Vea Mas MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. Vea Menos | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...Vea Mas MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. Vea Menos | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...Vea Mas MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. Vea Menos | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...Vea Mas MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. Vea Menos | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...Vea Mas MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. Vea Menos | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...Vea Mas MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. Vea Menos | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...Vea Mas MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. Vea Menos | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...Vea Mas MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. Vea Menos | |
| SABO®STAB UV 62 | SABO S.p.A | SABO®STAB UV 62 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications. It is an excellent light stabilizer for systems containing carbon black. It is non-discoloring and features low volati...Vea Mas SABO®STAB UV 62 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications. It is an excellent light stabilizer for systems containing carbon black. It is non-discoloring and features low volatility and excellent resistance to migration. SABO®STAB UV 62 is useful in adhesives and sealants. Vea Menos | |
| SABO®STAB UV 65 | SABO S.p.A | SABO®STAB UV 65 is a low molecular hindered amine light stabilizer (HALS) which is effective in a broad range of coatings. Applications include refinish coatings, industrial coatings, coil coatings, wood coatings, trade sale paints, and radiation curable ...Vea Mas SABO®STAB UV 65 is a low molecular hindered amine light stabilizer (HALS) which is effective in a broad range of coatings. Applications include refinish coatings, industrial coatings, coil coatings, wood coatings, trade sale paints, and radiation curable acrylics. The product is suitable for use in both water- and solvent-based coating systems. Vea Menos | |
| SABO®STAB UV 70 | SABO S.p.A | SABO®STAB UV 70 is a low molecular hindered amine light stabilizer (HALS) which is suitable for use in thin section applications such as PP film and tapes. It often shows a performance synergy with other light stabilizers, especially high molecular weight...Vea Mas SABO®STAB UV 70 is a low molecular hindered amine light stabilizer (HALS) which is suitable for use in thin section applications such as PP film and tapes. It often shows a performance synergy with other light stabilizers, especially high molecular weight HALS, benzoates, and UV absorbers. Vea Menos | |
| SABO®STAB UV 78 | SABO S.p.A | SABO®STAB UV 78 is a synergistic mixture of polymeric hindered amine light stabilizer (HALS). It is ideal for use in specialty adhesive applications. It excellent light stabilization performance in polyolefins (thin- and thick-section). It contributes to ...Vea Mas SABO®STAB UV 78 is a synergistic mixture of polymeric hindered amine light stabilizer (HALS). It is ideal for use in specialty adhesive applications. It excellent light stabilization performance in polyolefins (thin- and thick-section). It contributes to the thermal oxidative stability of polyolefins. Vea Menos | |
| SABO®STAB UV 79 | SABO S.p.A | SABO®STAB UV 79 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications. The product is particularly useful in PE applications (injection molding, rotational molding, water & gas pipe, film, a...Vea Mas SABO®STAB UV 79 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications. The product is particularly useful in PE applications (injection molding, rotational molding, water & gas pipe, film, and tape), PP (injection molding, film, and fibers), TPO, polyamide fibers, flexible and rigid PVC, styrenic TPE’s, polyurethanes, and specialty adhesive applications. Vea Menos | |
| SIH6200.0 | Gelest, Incorporated | UV blocking agent. | |
| SONGLIGHT® 1230 | Songwon International AG | SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and u...Vea Mas SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and unsaturated polyesters. Can be used in automotive and industrial coating, decorative paint and wood stains or varnishes. Vea Menos | |
| SONGNOX® 1680 | Songwon International AG | SONGNOX® 1680 is a secondary antioxidant for organic polymers. Applications include polyolefins, polycarbonate, polyester, and styrenics. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. | |
| SONGNOX® 2450 | Songwon International AG | SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. I...Vea Mas SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. It is an effective antioxidant for styrenics, synthetic rubbers, POM homo & copolymer, polyurethanes, polyamides, polyesters, MBS and PVC. It can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. Vea Menos | |
| SONGNOX® 6260 | Songwon International AG | SONGNOX® 6260 is a secondary high performance antioxidant for organic polymers. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. Applications include polyolefins, elastomers, polycarbonate, polyester, and st...Vea Mas SONGNOX® 6260 is a secondary high performance antioxidant for organic polymers. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. Applications include polyolefins, elastomers, polycarbonate, polyester, and styrenics. Vea Menos | |
| SONGNOX® DLTDP | Songwon International AG | SONGNOX® DLTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. DLTDP is an efficient stabilizer for polyolefins, particularly PP and HDPE. It can be used as ...Vea Mas SONGNOX® DLTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. DLTDP is an efficient stabilizer for polyolefins, particularly PP and HDPE. It can be used as a synergist in combination with phenolic antioxidants for enhanced aging and light stability. Vea Menos | |
| SONGNOX® DSTDP | Songwon International AG | SONGNOX® DSTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. Can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum p...Vea Mas SONGNOX® DSTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. Can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum products. It can also be used as a synergist in combination with phenolic antioxidants to enhance aging and light stability. Vea Menos | |
| SONGSORB® 1000 | Songwon International AG | SONGSORB® 1000 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. Offers ultraviolet light protection to ...Vea Mas SONGSORB® 1000 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. Offers ultraviolet light protection to a wide range of polymers. It can be used in combination with phenolic & phosphite antioxidants, and HALS to optimize performance in outdoor use. Vea Menos | |
| SONGSORB® 2340 | Songwon International AG | SONGSORB® 2340 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It is particularly suitable for applica...Vea Mas SONGSORB® 2340 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It is particularly suitable for application characterized by high surface area, such as films and fibers. Applications include PET fibers and films, Polycarbonate, POM, Nylon, Polyolefins, TPE, TPO, and coatings. Vea Menos | |
| SONGSORB® 3280 | Songwon International AG | SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low i...Vea Mas SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low initial color, good solubility in plasticizers and monomers, moderately low volatility, and excellent compatibility in a wide variety of substrates. SONGSORB® 3280 is recommended for use in polyolefins, PVC, styrene homo and copolymers, ABS, acrylic polymers, unsaturated polyesters, thermoplastic urethanes, moisture cured polyurethanes, polyacetals, polyvinylbutyral, two component epoxies and urethanes, oil alkyds and thermosetting acrylic enamels. Vea Menos | |
| Speedblock 326 | Lambson Group Ltd. | Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220...Vea Mas Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220nm to 400nm Vea Menos | |
| Speedblock 327 | Lambson Group Ltd. | Speedblock 327 is a UV absorber of the hydroxyl phenyl benzotriazole class that has absorption bands in the 200-230nm & 300-360nm ranges. A pale yellow powder, this product can be used in adhesives and polymers. | |
| Speedblock 328 | Lambson Group Ltd. | Speedblock 328 is a UV absorber of the hydroxyl phenyl benzotriazole class that can be used in adhesives and polymers. This pale yellow powder can be used alone or with additional additional additives including hindered light stabilisers antioxidants. | |
| Speedblock UV-0 | Lambson Group Ltd. | SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. | |
| Speedblock UV-6 | Lambson Group Ltd. | SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% de...Vea Mas SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. Vea Menos | |
| TINUVIN® 479-DW | BASF Dispersions & Resins | Tinuvin® 479-DW is an aqueous triazine-based UV absorber dispersion for coatings, overprint varnishes, adhesives and sealants. It has an extremely high extinction coefficient, high long-term performance, high thermal stability, and is non-migrating. It wa...Vea Mas Tinuvin® 479-DW is an aqueous triazine-based UV absorber dispersion for coatings, overprint varnishes, adhesives and sealants. It has an extremely high extinction coefficient, high long-term performance, high thermal stability, and is non-migrating. It was designed to meet the highest performance and durability requirements, particularly in thin films or at reduced film thickness in water-based transportation and industrial applications including energy curable systems (UV, EB). Due to its extremely high extinction, Tinuvin® 479-DW is especially suitable for all water-based coatings applied at reduced film thickness or for thin film applications exposed to high baking temperatures and/or to extreme environmental conditions. Vea Menos | |
| TINUVIN® 622 SF | BASF Dispersions & Resins | Tinuvin® 622 SF is a solid oligomeric low basic hindered amine light stabilizer (HALS) developed for coating, adhesive and sealant applications. It offers superior thermal stability and good long term performance, as well as non-migrating and antioxidant ...Vea Mas Tinuvin® 622 SF is a solid oligomeric low basic hindered amine light stabilizer (HALS) developed for coating, adhesive and sealant applications. It offers superior thermal stability and good long term performance, as well as non-migrating and antioxidant properties. This product is designed to meet high performance and durability requirements of all powder coatings as well as adhesive and sealant applications. It protects coatings from surface defects such as gloss reduction, cracking and chalking, and ensures the retention of mechanical properties. In addition, it shows thermally stabilizing and antioxidant properties. Vea Menos | |
| TINUVIN® P | BASF Dispersions & Resins | Tinuvin® P is a UV absorber of the hydroxyphenyl-benzotriazole class that imparts good light stability to a wide variety of polymers and organic substrates. It provides UV protection in a wide variety of polymers including styrene homo- and copolymers, en...Vea Mas Tinuvin® P is a UV absorber of the hydroxyphenyl-benzotriazole class that imparts good light stability to a wide variety of polymers and organic substrates. It provides UV protection in a wide variety of polymers including styrene homo- and copolymers, engineering plastics such as polyesters and acrylic resins, polyvinyl chloride, and other halogen containing polymers and copolymers (e.g. vinylidenes), acetals and cellulose esters. Elastomers, adhesives, polycarbonate blends, polyurethanes, and epoxy materials also benefit from the use of Tinuvin® P. Vea Menos | |
| ZNO Grade 400 | Zinc Oxide LLC | ZNO Grade 400 is manufactured by French (Indirect) Process with medium surface area, high assay and moderate impurities. This grade is widely used in the tire and rubber, paint and coatings, and all applications requiring an FDA approved substance. | |
| ZNO Grade 500 | Zinc Oxide LLC | ZNO Grade 500 is manufactured by French (Indirect) Process with medium surface area, high assay and low impurities. ZNO Grade 500 meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Dir...Vea Mas ZNO Grade 500 is manufactured by French (Indirect) Process with medium surface area, high assay and low impurities. ZNO Grade 500 meets the requirements of ASTM specification D79 for paint, EC RoHS for heavy metal limits, and End of Live Vehicles (ELV Directive), and other regulations where good quality zinc oxide is required. This grade is used where lower impurities are required and is used in the tire and rubber, paint and coatings, and all applications except when a special product is requested or required. Vea Menos | |
| ZNO Grade 800L | Zinc Oxide LLC | ZNO Grade 800L is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a slightly lower surface area, high assay and very low impurities. This grade is used where very low impurities are required and slightly less ...Vea Mas ZNO Grade 800L is a very good quality brilliant white zinc oxide manufactured by French (Indirect) Process with a slightly lower surface area, high assay and very low impurities. This grade is used where very low impurities are required and slightly less re-activity provides benefits in the application, such as in paint and coatings to reduce potential gelling/early shelf life failures due the zinc oxide undesirably reacting with dispersants or TiO2 coatings. This grade is also used in ceramics. Vea Menos | |
| ZOCO 100 | Zochem Inc. | ZOCO 100 is a fine particle size, high purity zinc oxide used in applications such as paints, resins, primers, and adhesives. | |
| ZOCO 101 | Zochem Inc. | ZOCO 101 is a fine particle size, high purity zinc oxide used for applications that require higher reactivity and additional suspension. This product is used in paints, resins, primers, and adhesives. | |
| ZOCO 102 | Zochem Inc. | ZOCO 102 is a fine particle size, high purity zinc oxide used in applications that require high reactivity and greater suspension. This product is used in paints, resins, primers, and adhesives. | |
| ZOCO 103 | Zochem Inc. | ZOCO 103 is a large particle size, high purity zinc oxide used in applications that require low surface area and reactivity. This product is used in paints and adhesives. | |
| ZOCO 103C | Zochem Inc. | ZOCO 103C is a large particle size, high purity propionic treated zinc oxide for applications that require low surface area and reactivity. This product is used in paint and adhesives. | |
| ZOCO 104 | Zochem Inc. | ZOCO 104 is a medium particle size, high purity zinc oxide used in applications where low surface area and reactivity is required. This product is commonly used in paints, resins, primers, and adhesives. |
