| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...Vea Mas 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). Vea Menos | |
| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| BECKOSOL® 3859-Z-80 | Polynt Composites | BECKOSOL® 3859-Z-80 is a short oil, rosin/phenolic modified alkyd resin that can be used in lift resistant primers for lacquers and other strong solvent topcoats and interior machinery shop coats. This product conforms with TT-P-664D corrosion-inhibiting ...Vea Mas BECKOSOL® 3859-Z-80 is a short oil, rosin/phenolic modified alkyd resin that can be used in lift resistant primers for lacquers and other strong solvent topcoats and interior machinery shop coats. This product conforms with TT-P-664D corrosion-inhibiting primers and compliance primers that need to meet VOC regulations. It exhibits good corrosion resistance and provides good adhesion to a variety of surfaces. Vea Menos | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| BENASOL AS 308 in XYLENE | Benasedo | BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...Vea Mas BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. Vea Menos | |
| BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) | Benasedo | BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...Vea Mas BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. Vea Menos | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...Vea Mas BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. Vea Menos | |
| BYD-1403 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. Th...Vea Mas BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. This product is non-toxic. Its substrate is an aromatic waterborne polyurethane. Vea Menos | |
| BYK-3755 | BYK | BYK-3755 is a silicone-containing surface additive with extended food contact compliance for solvent-borne coating systems with a medium reduction in surface tension and a medium increase in surface slip. | Request Sample |
| BYK-3756 | BYK | BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases ...Vea Mas BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases surface slip. Vea Menos | Request Sample |
| CHS-Alkyd C 351 E 75 | Spolchemie | CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated ...Vea Mas CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 E 75 is primarily used for stove coatings and paints constructed on nitrocellulose. Vea Menos | |
| CHS-Alkyd C 351 X 60 | Spolchemie | CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be a...Vea Mas CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 X 60 is primarily used for stove coatings and paints fabricated on nitrocellulose. Vea Menos | |
| CHS-Epoxy 101 X 60 | Spolchemie | CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination w...Vea Mas CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination with melamine-formaldehyde resins. Vea Menos | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| Disvacryl-1001 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1001 is a thermosetting acrylic resin. This product includes xylene and butanol as volatile byproducts. It can be used in high-quality domestic appliance and OEM automotive finishes. | |
| Disvacryl-1010 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1010 is a thermoplastic acrylic resin. This product includes naphtha solvents as a volatile byproduct. It can be used in high-quality air-drying coatings that provide good gloss and durability. | |
| Disvacryl-1011 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1011 is a thermoplastic acrylic resin. This product includes xylene and naphtha solvents as volatile byproducts. It can be used in high-quality air-drying coatings for domestic appliances which provide good gloss and durability. | |
| Disvalkyd-544 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-544 is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in stoving enamels, and nitrocellulose paints, primers, and putty. | |
| Disvalkyd-544 LV | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-544 LV is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in high-gloss stoving enamels. | |
| Disvamine-702 | D.S.V. Chemicals Pvt. Ltd. | Disvamine-702 is a butylated amino resin. This product is a melamine formaldehyde resin. It is soluble in butanol. Disvamine-702 can be used in stoving enamels and roller coatings. | |
| Domacryl 5130 70 BAc | HELIOS RESINS | Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and ma...Vea Mas Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and maintenance coatings. Vea Menos | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...Vea Mas DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. Vea Menos | |
| Epoxies® 70-3812 NC | Epoxies, Etc. | Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...Vea Mas Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. Vea Menos | |
| FINE-CLAD® M-8731 | Polynt Composites | FINE-CLAD® M-8731, in the form of solid, clear granules, is a carboxyl-functional polyester resin designed to cure with bisphenol A epoxy resins in office furniture coatings, machinery and equipment, general metals, major appliances, and lawn and garden a...Vea Mas FINE-CLAD® M-8731, in the form of solid, clear granules, is a carboxyl-functional polyester resin designed to cure with bisphenol A epoxy resins in office furniture coatings, machinery and equipment, general metals, major appliances, and lawn and garden applications. This product features good flowability with pre-catalyzed high reactivity. Vea Menos | |
| Idroben 4705 | Benasedo | Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with ...Vea Mas Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with amino - resins. Vea Menos | |
| Idroben 827 | Benasedo | Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying...Vea Mas Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying or dipping. Vea Menos | |
| ISOBEN 5 | Benasedo | ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pig...Vea Mas ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pigmented or clear finishes, for metals, in automotive industry, marine superstructures and concrete manucfatures . Vea Menos | |
| JONCRYL® 1540 | BASF Dispersions & Resins | Joncryl® 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is su...Vea Mas Joncryl® 1540 is a hydroxy functional emulsion designed for thermoset coatings cured with melamines. It exhibits faster cure/lower temperature potential. The coatings offer good flexibility, chemical resistance and corrosion protection. This product is suitable for metal and hardboard applications. Vea Menos | |
| Polyester Modified Silicon Resin SM1072A | Jiangsu Sanmu Group Corporation | SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and...Vea Mas SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and yellowing resistance. SM1072A can be widely used in heat resisting coatings, used as a basic resin for non-stick coatings and special coatings for frying pans, electric cookers, ovens, stoves, toasters, electric irons, kitchen ventilators, and gas stoves. Vea Menos | |
| R2-3930-11 | NuSil Silicone Technology 1 | R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications w...Vea Mas R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance. It has strong physical attributes which make it bond aggressively to most surfaces. Vea Menos | |
| R3-1075 | NuSil Silicone Technology 1 | R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It ca...Vea Mas R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It can also be utilized as a conformal coating for electrical and electronic components including rigid and flexible printed circuit boards. Vea Menos | |
| SCD 1040 | Etna Tec Limited, LLC | SCD 1040 is an oil-free polyester resin that is designed precisely for low VOC finishes. This product is compatible with alkyds and acrylics when used as a modifier to improve dry film properties. It is primarily used in machinery coatings, high solids ba...Vea Mas SCD 1040 is an oil-free polyester resin that is designed precisely for low VOC finishes. This product is compatible with alkyds and acrylics when used as a modifier to improve dry film properties. It is primarily used in machinery coatings, high solids baking enamels, and automotive OEM. Vea Menos | |
| SCD 1066 | Etna Tec Limited, LLC | SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and prim...Vea Mas SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and primers, but can also be used for adhesives, appliance coatings, and container coatings. Vea Menos | |
| SCD 1091 | Etna Tec Limited, LLC | SCD 1091 is an oil-free polyester resin that is designed specifically for excellent adhesion to a variety of metal and plastic substrates. It also offers a hardness/flexibility ratio at low temperature cure cycles while retaining excellent film properties...Vea Mas SCD 1091 is an oil-free polyester resin that is designed specifically for excellent adhesion to a variety of metal and plastic substrates. It also offers a hardness/flexibility ratio at low temperature cure cycles while retaining excellent film properties. When modifies with SCD 1040, less than 3.0 pounds/gallon V.O.C. coatings can be formulated with SCD 1091. Vea Menos | |
| SCD 6150 | Etna Tec Limited, LLC | SCD 6150 is an oil-free polyester resin that offers a good cure response and high film hardness. This product can also offer corrosion resistance and excellent film properties. It is often used as a non-fugitive adhesion promoter, and is primarily used fo...Vea Mas SCD 6150 is an oil-free polyester resin that offers a good cure response and high film hardness. This product can also offer corrosion resistance and excellent film properties. It is often used as a non-fugitive adhesion promoter, and is primarily used for machinery coatings and general industrial finishing. Vea Menos | |
| SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTT es una resina de poliéster siliconado para la producción de revestimientos decorativos. Es un líquido entre transparente y levemente turbio que se utiliza en revestimientos anti-adherentes en combinación con politetrafluoroetileno (PTFE) y...Vea Mas SILIKOFTAL® HTT es una resina de poliéster siliconado para la producción de revestimientos decorativos. Es un líquido entre transparente y levemente turbio que se utiliza en revestimientos anti-adherentes en combinación con politetrafluoroetileno (PTFE) y en revestimientos decorativos para elementos de cocina, electrodomésticos y calefactores eléctricos y a gas con una estabilidad térmica permanente de 250 °C. Algunas características especiales de SILIKOFTAL® HTL 2 incluyen excelente resistencia al detergente para lavaplatos, baja propensión a ponerse amarilla, buena retención del brillo, sin el agregado de compuestos de organoestaño. Vea Menos | Request Sample |
| SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) | Worlée-Chemie G.m.b.H. | Una resina acrílica para la fabricación de capas de alta calidad de capas superiores de 2 componentes. | |
| WorléeKyd S 549 (55% In White Spirit 135-175) | Worlée-Chemie G.m.b.H. | Una resina alquídica de secado rápido, aceite intermedio, de viscosidad baja para su uso en secado al aire y forzado industrial, pinturas para vehículos, y máquinas, así como en el secado rápido de bricolaje y las pinturas para radiadores. | |
| WorléeKyd S 549 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | Una resina alquídica de secado rápido, aceite intermedio, de viscosidad baja para su uso en secado al aire y forzado industrial, pinturas para vehículos, y máquinas, así como en el secado rápido de bricolaje y las pinturas para radiadores. | |
| WorléeKyd SO 554 | Worlée-Chemie G.m.b.H. | Una resina alquídica de aceite mediano, de secado rápido para su uso en pinturas de secado al aire industrial, vehículos, y maquinaria, así como para el olor y para desaromatizar de bricolaje y para radiadores. | |
| WorléeKyd V 162 | Worlée-Chemie G.m.b.H. | Una resina alquídica de aceite mediano, de secado rápido para su uso en pinturas de secado al aire y forzado industrial, vehículos, maquinaria, y radiador. | |
| WorléeKyd V 543 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | Una resina alquídica de aceite mediano, de secado rápido para su uso en pinturas de secado al aire y forzado industriales, maquinarias, y reparaciones de automóviles. También se utiliza en pinturas de secado rápido del bricolaje y para radiadores. | |
| WorléeKyd V 543 (55% In White Spirit 145-195/ XYLENE) | Worlée-Chemie G.m.b.H. | Una resina alquídica de aceite mediano, de secado rápido para su uso en pinturas de secado al aire y forzado industriales, maquinarias, y reparaciones de automóviles. También se utiliza en pinturas de secado rápido del bricolaje y para radiadores. |
